E-Zee Product Disclaimer. Terms. Return Goods. Warranty Information. Ordering/Shipping/Pricing

Transcription

1

2 E-Zee Product Disclaimer This catalog is a listing of NuPulse and Holdren Brothers items. NOTICE: Some items are copies of original products. In most cases they will be identified with the word replacement. Some rebuilt items are rebuilt with copy aftermarket parts. These copies are not original to the manufacturer and have not been licensed by, recommended by, or endorsed by the manufacturer. All trademarks and service marks are the property of their respective owners. E-Zee Milking Equipment, LLC is not an authorized dealer or representative for DeLaval, Universal, Germania, Westfalia, Surge, IBA BouMatic and Mueller. *DeLaval, Universal, and Germania are registered trademarks of DeLaval Inc. ** Surge and Westfalia are registered trademarks of GEA Westfalia-Surge Inc. ***BouMatic is a registered trademark of BouMatic LLC. IBA is a registered trademark of IBA, Inc. Mueller is a registered trademark of Paul Mueller Company. Terms Our Terms are Net 30 Days with approved credit. If you cannot supply a good credit history, your order will either be sent COD or paid with a credit card before it is shipped. Accounts with past-due balances may be held until payment arrangements can be made. Return Goods All returned items require a copy attached of the invoice where items were originally purchased and a completed RMA form, see Page 45. Items should be returned within 30 days of the invoice date or a restocking fee may be applied. E-Zee will not be responsible for any shipping costs on incorrect orders that were placed without our part numbers. Warranty Information E-Zee s warranty covers all material and workmanship defects at the time of the sale. A 1-year warranty applies to most new products, and 30 days on used equipment, unless otherwise noted. DISCLAIMER OF WARRANTIES: THE PRODUCTS ARE SOLD WITH NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND NO WARRANTY OF MERCHANTABILITY THERE ARE NO OTHER WARRANTIES (WHETHER EXPRESS OR IMPLIED) OF ANY KIND other than E-Zee s obligation to either replace the defective product(s) or issue a full credit for any defective product that is received by E-Zee Milking Equipment, LLC at 3772 East Newport Road, Gordonville, PA or any of our E-Zee locations, and accompanied by a copy of the original invoice. If any product is not capable of replacement (as E-Zee in its sole discretion may determine), E-Zee will issue a full credit for that product s actual purchase price (not including shipping and handling costs, if any) to the purchasing customer. E-Zee is not responsible for any extra labor charges that are incurred on warranty work. We will not be responsible for any damages, loss, expenses incurred or any other consequential damages, of any kind, that arise from use or the inability to use any of our products. All products are sold with the understanding that the end user will test these products in actual use and determine the adaptability of their intended use. Ordering/Shipping/Pricing We will try to ship all orders the same day we receive them, providing we receive them by 12:00 Noon (EST). Any special orders, phone orders or orders without part numbers will need at least one extra day to process unless you request AIR shipping, or ask us to prioritize an urgent order. NOTE: Prices are subject to change without notice. MINIMUM ORDERS: REGULAR ORDERS UNDER $35.00 ARE SUBJECT TO A $5.00 HANDLING CHARGE, AND DROP SHIPPED ORDERS UNDER $50.00 ARE SUBJECT TO A $5.00 HANDLING CHARGE.

3 TABLE OF CONTENTS Milker Claws for Cows... 3 Milker Claw for Goats & Breakdown... Milking Equipment... 9 Milker Unit Accessories... PulStar Pulsator & Accessories... Portable Mini Milker Systems... Mini Milker Breakdowns... Reflex Variable Speed Drives Wash Systems

4 NOTES PAGE 2 VER TO ORDER, PHONE

5 NUPULSE ORIGINAL CLAWS The Original NuPulse Milker Claw is available in a Standard (one line system) or the MLX (two line system). It is the ultimate in simplicity and performance. The unique vacuum operated pulsator is incorporated into the claw eliminating the need for troublesome electrical components and wiring required by most other machines. It can be completely disassembled and rebuilt easily and without tools. The pulsation rate must be preset and then changes automatically with the milk flow. This is also referred to as Flow Response Pulsation (FRP). ORIGINAL NUPULSE STANDARD CLAW The original standard claw is a one line system. It only uses a 5/8 milk hose and gets its vacuum and pulsation through the milk line. ORIGINAL NUPULSE MLX CLAW The original MLX claw is a two line system. It uses a 5/8 milk hose for vacuum and also has a separate 3/8 pulsation hose NP Original Standard Claw 10067NP Original MLX Claw Picture shows Standard Claw with Standard Unit Kit. Picture shows MLX Claw with MLX Unit Kit. For Unit Kits, see Page 8 For Unit Kits, see Page 8 NUPULSE FULFLO CLAWS The NuPulse FulFlo Claw has large 3/4 milk outlet to ensure rapid clearance of milk and eliminate flooding. The NuPulse FulFlo Claw has the same Flow Response Pulsation (FRP) as the Original NuPulse Claw and is available in a Standard or MLX system. The milk inlets are available in both the original (herringbone) configuration and parallel parlor (between hind legs) styles. The FulFlo Claws are also available with a Shut-Off valve. Parallel Parlor Milk Inlet Configuration FulFlo Standard Claw 12000NP Standard Claw 12100NP Std. Claw with Shut-Off 12200NP Std. Parallel Claw 12300NP Std. Parallel Claw with Shut-Off Picture shows Claw with Unit Kit (Shells, Liners, etc.) For Unit Kits, see Page 8 Original Milk Inlet Configurations FulFlo MLX Claw 12400NP MLX Claw 12500NP MLX Claw with Shut-Off 12600NP MLX Parallel Claw 12700NP MLX Parallel Claw with Shut-Off TO ORDER, PHONE VER PAGE 3

6 ORIGINAL STANDARD AND MLX CLAWS MZ10006NP Standard Claws for One-line System MLX Claws for Two-line System MZ10007NP MZ10006NP MZ10007NP Dome Spring 10019NP Standard Repair Kit MZ10005NP Diaphragm Complete MZ10005NP MZ10022NP MZ10009NP Bobbin Only Bobbin O-Ring MZ10022NP MZ10010NP MZ10028NP Bobbin Housing Air Filter MZ10009NP MZ10015NP Bobbin Housing Seal 10107NP MLX Repair Kit MZ10011NP Bobbin Valve MZ10010NP MZ10012NP Bobbin Clip MZ10014NP Middle O-Ring MZ10028NP MZ10016NP Standard Middle MZ10015NP 10008NP Bobbin Complete MZ10068NP MZ10030NP MLX Middle Claw Protector Seal MZ10011NP MZ10017NP Square Base O-Ring MZ10012NP MZ10014NP MZ10002NP MZ10069NP MZ10013NP MLX Diaphragm Standard Super Base MZ10070NP MLX Super Base MZ10002NP Wash Plug MZ10016NP (Standard) -OR- MZ10068NP (MLX) MZ10031NP Rubber Hook (Comes with Base but can be ordered separately.) MZ10030NP 10019NP Pulsator Repair Kit (For one line system) MZ10017NP (Standard) -OR- MZ10069NP (MLX) 10107NP 10008NP MLX Pulsator Repair Kit (For two line system) Bobbin Complete (Assembled) MZ10013NP -OR- (Standard) MZ10031NP MZ10070NP (MLX) Note: MLX Claws have a countersunk bleed hole on side of Base right under the rubber hook (.43, #57 drill bit). PAGE 4 VER TO ORDER, PHONE

7 FULFLO STANDARD AND MLX CLAWS MZ12001NP Shut-Off Pieces Standard Claws = one line system MLX Claws = two line system MZ12001NP FulFlo Dome MZ10007NP MZ12016NP MZ10007NP Spring MZ10005NP Diaphragm Complete MZ10005NP MZ10022NP MZ12017NP MZ12015NP MZ10022NP MZ10009NP MZ10010NP MZ10028NP Bobbin Only Bobbin O-Ring Bobbin Housing Air Filter MZ10009NP Original Configuration MZ10015NP MZ10011NP Bobbin Housing Seal Bobbin Valve MZ10010NP MZ10012NP Bobbin Clip MZ10014NP Middle O-Ring MZ10028NP MZ12005NP FulFlo Standard Middle MZ10015NP MZ10011NP Parallel Configuration MZ12405NP MZ10030NP MZ10017NP FulFlo MLX Middle Claw Protector Seal Square Base O-Ring MZ10012NP MZ10002NP MZ10014NP MZ12005NP -OR- (Standard) MZ12405NP (MLX) MZ10069NP MZ12010NP MZ12110NP W12110NP MZ12210NP MZ12310NP W12210NP MLX Diaphragm FulFlo Standard Base FulFlo Standard Base with Shut-Off FulFlo Std Base Drilled for Shut-Off FulFlo Parallel Standard Base FulFlo Parallel Std Base w/shut-off FulFlo Parallel Std Base Drilled for Shut-Off MZ10030NP MZ10017NP (Standard) FulFlo Standard Base - see table at right for options -OR- -OR- MZ10031NP TO ORDER, PHONE MZ10069NP (MLX) FulFlo MLX Base - see table at right for options MZ12410NP MZ12510NP W12510NP MZ12610NP MZ12710NP W12710NP MZ10002NP MZ10031NP FulFlo MLX Base FulFlo MLX Base with Shut-Off FulFlo MLX Base Drilled f/shut-off FulFlo Parallel MLX Base FulFlo Parallel MLX Base w/shut-off FulFlo Parallel MLX Base Drilled for Shut-Off Wash Plug Rubber Hook (Comes with Base but can be ordered separately.) Note: MLX Claws have a countersunk bleed hole on side of Base right under the rubber hook (.43, #57 drill bit). VER PAGE 5

8 GOAT CLAWS The NuPulse goat claw has the MZ10006NP Dome MZ10006NP same features as the original NuPulse claw but has a more MZ10007NP MZ10005NP Spring Diaphragm Complete MZ10007NP shallow base and smaller inlets designed for goats. As MZ10022NP MZ10009NP Bobbin Only Bobbin O-Ring MZ10005NP MZ10022NP with the other NuPulse claws, the Flow Response Pulsation (FRP) is built into the claw and receives its vacuum through the milk line. MZ10010NP MZ10028NP MZ10015NP MZ10011NP MZ10012NP Bobbin Housing Air Filter Bobbin Housing Seal Bobbin Valve Bobbin Clip MZ10009NP MZ10014NP Middle O-Ring MZ10010NP MZ10028NP GOAT CLAW 10101NP MZ10100NP MZ10017NP MZ10106NP MZ10002NP Goat Middle Square Base O-Ring Goat Base Wash Plug MZ10015NP MZ10011NP 10019NP Standard Repair Kit MZ10012NP 10008NP Bobbin Complete (Assembled) MZ10014NP MZ10100NP MZ10017NP 10019NP Standard Repair Kit MZ10106NP Goat Claw shown with Unit Kit See Page 8 for Unit Kit information MZ10002NP 10008NP Bobbin Complete PAGE 6 VER TO ORDER, PHONE

9 CLAW OPERATION AND CLEANING COW CLAW OPERATION To obtain the maximum performance from your NuPulse Milker, here are some helpful points. 1. Recommended vacuum levels are: a. - b. c. NOTE: 2. Pulsation rate should be set at pulsations per minute for Standard Units and pulsations per minute for MLX Units in static mode (non-milking). To increase the pulsation rate, turn the cam on the diaphragm counterclockwise. To decrease the pulsation rate, turn the cam clockwise. NOTE: There is a (+) and a (-) molded into the top of the cam knob for reference. 3. Clean the air filter regularly. 4. Use hose hangers in stanchion barns to properly position the milker under the cow 5. Keep the milk hose as short as possible. 6. Check the diaphragm, bobbin valve, bobbin O-ring and bobbin vacuum hole regularly for cleanliness and proper operation. GOAT CLAW OPERATION To obtain the maximum performance from your NuPulse Milker, here are some helpful points. 1. Recommended vacuum levels are: a. High Line: Standard Unit b. c. NOTE: 2. Pulsation rate should be set at pulsations per minute for Goat Units in static mode (non-milking ). To increase the pulsation rate, turn the cam on the diaphragm counterclockwise. To decrease the pulsation rate, turn the cam clockwise. NOTE: There is a (+) and a (-) molded into the top of the cam knob for reference. 3. Clean the air filter regularly. 4. Use hose hangers in stanchion barns to properly position the milker under the goat. 5. Keep the milk hose as short as possible. 6. Check the diaphragm, bobbin valve, bobbin O-ring and bobbin vacuum hole regularly for cleanliness and proper operation. CLEANING Wash water temperature should not drop below 110 F during recirculation cycle, and should have a ph of 11.5 or higher. C.I.P. Cleaning using Jetters 1. Put teat cups on Jetters. 2. Insert jetter tube adapters into claw wash port. 3. Manually clean the pulsator parts weekly or as needed. CAUTION Do not over tighten the claw parts when re-assembling. Let the O-rings do their job. TROUBLESHOOTING Units Falling Off 1) Over milking 2) Wet, soapy teats 3) Worn rubberware 4) Vacuum level too low 5) Line flooding Kicking 1) Vacuum set too high 2) Pulsator malfunction 3) Stray voltage 4) Over milking 5) Sore teats Pulsators Slow Down or Stop 1) Milk hose kinked 2) Air leaks in claw 3) Bobbin hole plugged 4) Dirty air filter 5) Damaged or missing O-ring 6) Damaged diaphragm rubber Units Speed Up 1) This is normal during heavy milk flow Slow Milking 1) Vacuum too low 2) Worn inflations 3) Vacuum leaks 4) Clogged bowl vent (MLX) 5) Over milking 6) Milk hose or inlet valve undersized 7) Pulsator rubberware worn out 8) Line flooding too many units per slope, milk inlets lower 2/3 of pipeline TO ORDER, PHONE VER PAGE 7

10 UNIT KITS FOR CLAW UNIT KIT FOR STANDARD (ONE LINE) SYSTEM Includes Inflations, Heavy Shells, Premium Short Air Tubes and 9 ft. of Premium Milk Hose 12330NP - Kit for Original Standard Claw (MZ10057 Liners & Snap Clamp) 12340NP - Kit for FulFlo Standard Claw (MZ10055 Liners & Snap Clamp) 12360NP - Kit for FulFlo Standard Claw with Shut-Off (MZ10055 Liners) UNIT KIT FOR MLX (TWO LINE) SYSTEM Includes Inflations, Heavy Shells, Premium Short Air Tubes, 9 ft. Premium Milk Hose, 9 ½ Feet of Pulsation Hose and Dual Hose Clips 12730NP - Kit for Original MLX Claw (MZ10057 Liners & Snap Clamp) 12740NP - Kit for FulFlo MLX Claw (MZ10055 Liners & Snap Clamp) 12760NP - Kit for FulFlo MLX Claw with Shut-Off (MZ10055 Liners) UNIT KIT FOR GOAT CLAW 10105NP - Kit for Goat Claw has 2 x MZ10050 Liners, 2 x MZ10047 Lightweight Shells, 9 ft. Premium Milk Hose. 2 x Premium Short Air Tubes & Snap Clamp SHELLS AND INFLATIONS NUPULSE SHELLS NuPulse manufactures both a heavy weight (14 ga.) shell that is used with the plastic claw to allow even distribution of weight while milking, as well as the light weight (18 ga.) shell that is used on our goat claw and can be used on traditional heavier claws. MZ20705NP - Heavy Weight 10.9 oz. (.68 lb) MZ10047NP - Lightweight 7.9 oz. (.5 lb) UNIVERSAL INFLATIONS Triangular inflations that work with the NuPulse shell but have a smaller bore than the NuPulse inflations. The triangular shape causes the inflation to compresses on three sides instead of two. These may work better on cows with small teats TLC-U1 NUPULSE INFLATIONS NuPulse long-life inflations last 3000 milkings. MZ10057NP - Super for Original Claws MZ10050NP - Smith 16 for Goat Claw MZ10055NP - FulFlo Super for FulFlo Claw MZ10058NP - FulFlo Super Short for FulFlo Claw MOLDED AIR TUBES /2 x 9/ x 9/32 NUPULSE SHORT AIR TUBES Premium green stripe short air tubes MZ13160NP - 7 7/8 x 1/4 INFLATION BRUSH A40500NP - 1-1/4 with Handle Part No A Mouth B Bore Top C Bore Middle D Bore Bottom E Stem ID F Stem Length G Nominal In Shell Barrel Length MZ10050 Smith 16 MZ10055 FulFlo Super MZ10057 Super MZ10058 FulFlo Short 26/32 29/32 28/32 24/32 9/32 5-7/8 5-7/8 6-5/8 26/32 29/32 28/32 24/32 7/16 5-7/8 5-7/8 6-5/8 26/32 29/32 28/32 24/32 27/64 5-7/8 5-7/8 6-5/8 26/32 29/32 28/32 24/32 7/16 5-1/8 5-7/8 6-5/8 PAGE 8 VER TO ORDER, PHONE

11 TUBING GENUINE NUPULSE PREMIUM HOSE Genuine NuPulse hose is made with a premium, durable rubber with a thick wall to prevent premature collapsing. Has a green stripe. Can be purchased by the roll or foot. MZ13162NP - 5/8 Milk Hose (63 ft.) MZ13164NP - 3/8 Pulsation Hose (60ft.) GLITEX CLEAR TUBING (blue tinted) /32 Single 100 roll /8 Single 100 roll /2 Single 100 & 500 roll /16 Single 100 & 500 roll /8 Single 100 & 500 roll /4 Single 100 & 400 roll /8 Single 50 roll Single 50 roll /2 Single 50 roll /4 Twin 100 roll /32 Twin 100 roll /8 Twin 100 roll BLACK RUBBER TUBING For Milk and Vacuum Lines /4 Single 50 roll /2 Single 50 roll /16 Single 50 roll /8 Single 50 roll /4 Single 50 roll /8 Single 50 roll /32 Single 50 roll /4 Twin 50 roll /32 Twin 50 roll SILICONE TUBING Long lasting. Resists butterfats in the milk. Resists cracking /8 100 roll /4 100 roll ULTRACLEAN TUBING 65 roll - Rubber with Silicone lining /8 (Milk Rite #6505) /4 (Milk Rite #6511) MLX ADAPTERS MLX adapters are used to connect the pulsation hose on MLX Units to existing Stall Cocks. BOUMATIC ADAPTER DELAVAL ADAPTER 10077NP M10075NP UNIVERSAL TOP ENTRY ADAPTER 10063NP UNIVERSAL SIDE ENTRY ADAPTER 10076NP 10078NP SURGE/CHOREBOY ADAPTER MLX 2 TO 1 PAIL ADAPTER TEE Used to connect pulsation hose and milk hose together for operating on a common source D32342NP For a complete list of available inflations and tubing, see the 2019 E-Zee Milking Equipment Catalog TO ORDER, PHONE VER PAGE 9

12 JETTER SYSTEMS The NuPulse Jet Wash System is used for the NuPulse Claws and is different than most conventional CIP units. It washes the claws upright (in the milking position) instead of upside down, which prevents the wash water from getting into top part of the claw where the Bobbin, Diaphragm and Spring are located. JET WASH SYSTEM 10090NP Standard Jet Washer System (Includes Jetter, Jetter Mounting Kit, Jetter Hose with Adapter) 10099NP MLX Jet Washer System (Includes Jetter, Jetter Mounting Kit, Jetter Cap) 10095NP Goat Jet Washer System (Includes Jetter, Jetter Mtg Kit, Jetter Tee, Jetter Hoses with Adapter) 10112NP Jet Washer Only (Does not include accessories) TOP WASH SYSTEM 10114NP Standard Top Wash System (Includes Jetter, Jetter Mounting Kit, Jetter Hose with Adapter) 10109NP MLX Top Wash System (Includes Jetter, Jetter Mounting Kit, Jetter Cap) 10117NP Goat Top Wash System (Includes Jetter, Jetter Mtg Kit, Jetter Tee, Jetter Hose with Adapter) 10119NP Top Wash Jetter Only (Does not include accessories) MZ10096NP 72446NP 10128NP 1-1/2 JETTER CONVERSION KIT Retrofits 2 Jetter for 1-1/2 line. M10096NP M10090NP 2 Jetter Clamp O-Ring for Jetter Mounting Kit M10090NP M10098NP 71526NP 72446NP MZ10095NP 10/24 x 1.5 PPHMS SS Screw Jetter Cover with 2 Saddle MZ10095NP MZ10085NP Large O-Ring for Jetter Base MZ10094NP Jetter Base (less Jets) MZ10078NP Jetter Jet Circlip MZ10085NP MZ10109NP MZ10077NP MZ10083NP Jetter Jet Spacer Ring O-Ring for Jetter Jet MZ13170NP MZ10079NP MZ13170NP Jetter Jet 14 Jetter Tube MZ10094NP MZ10024NP Jetter Tube Adapter MZ10024NP MZ10109NP Tee for Goat Washer Conversion MZ10117NP Top Wash Jetter Cup MZ10078NP MZ10117NP MZ10118NP Top Wash Jetter Cone MZ10077NP Dust Cap for MLX Jetter Washer MZ10083NP MZ10118NP NP 1-1/2 Jetter Conversion Kit M10098NP Gasket Adapter for 1-1/2 line MZ10079NP 71526NP 10/24 x 1.25 PPHMS SS Screw PAGE 10 VER TO ORDER, PHONE

13 JET WASH ACCESSORIES JETTER JET COVER High quality rubber covers are designed to close the Jet Washer while not in use. Includes stainless steel chains to prevent loss of covers. Can also be used to cover extra jets if washing only one goat unit. M10089NP STANDARD JETTER BASE WITH JETS Used with both 2 and 1-1/2 Jetters. Recommended that large O-Ring be replaced at the same time as the base or cover. Note: 2 x M10089NP are required for each complete jetter. JETTER TUBE WITH ADAPTER The Jetter Tube connects to the Jetter and plugs into the middle section of the standard claw and goat claw. This allows the wash water to directly enter the middle section of the claw for cleaning NP - For Standard Original or FulFlo Cow Claw - 14 Jetter Tube with Jetter Tube Adapter MZ10175NP - For Goat Claw consists of 1 x 14 Jetter Tube, 2 x 7 pieces of Jetter Tube, 2 x Jetter Tube Adapters and 1 x Tee for Goat Unit Note: The MLX claws do NOT use a Jetter Tube with Adapter NP - Jetter Base Only with Jets 2 JETTER CLAMP KIT JETTER REPLACEMENT KIT Kit includes 4 each of Jetter Jet, Jet O-Ring, Jet Circlip & Jet Spacer Ring NP - Kit TOP WASH JETTER BASE WITH CUPS AND CONES Used with both 2 and 1-1/2 Jetters. Recommended that large O-Ring be replaced at the same time as the base or cover NP - Top Wash Base Only with Cups and Cones TOP WASH REPLACEMENT KIT Kit includes 4 each of Top Wash Rubber Cup and Top Wash Cone. Used for mounting the jetters on a 2 wash line NP 1-1/2 JETTER CONVERSION KIT Used when mounting Jetters on a 1-1/2 wash line. Use the M10098NP Gasket in place of the M10090NP O-Ring and use the 1.25 screws in place of the 1.5 screws that come with the Complete Jetter Assembly NP PARLOR JETTER MOUNTING KIT Designed to mount the jetter in the parlor - remote from the wash line. Kit includes Washer Plate, L Bracket, Manifold Adapter, Gasket & 2 Screws NP - Kit M00120NP - Washer Plate L Bracket MZ10113NP - Manifold Adapter M10098NP - Gasket 72446NP - 10/24 x 1.5 PPHMS SS Screw TO ORDER, PHONE VER PAGE 11

14 MILKER UNIT ACCESSORIES PULSATOR SPRING GAUGE Used to determine maximum and minimum length for the pulsator spring. MZ10008NP STAINLESS STEEL TAKEOFF BRACKET For use with all NuPulse Claws to provide an attachment point for Automatic Takeoff Cords RED INFLATION PLUG The NuPulse Inflation plug can be used on any inflation. MZ10522NP RUBBER CLOSURE Used on straight inlets to shut off vacuum. A32050NP - 5/8 A32051NP - 3/4 MOLDED ELBOW PRICKER Used in cleaning air bleed holes in the pulsator bobbin and MLX air bleed hole in bowl. MZ10020NP 2 & 3 HANGERS BRACKETS to 3 L Hanger Bracket Complete to 3 U Hanger Bracket Complete U Bracket Only - Extended One Side L Bracket Only U Clip for Hangers M10026NP - 5/8 x 5/ Fits 5/ Fits 3/4 PIPELINE NIPPLE CLOSURE HOSE HANGER Hose hanger fits up to 2 line / / BLUE MILK VALVE Gray Round Slide Gasket Flat Square Pipe Gasket CANE FOR BLUE MILK VALVE /8 Std Gooseneck (Push Up) /8 Reverse Gooseneck (Pull Down) CLAMP ON VALVE NIPPLE x 5/ x 5/ x 3/ Gasket for 5/ Gasket for 3/ / /4 SNAP CLAMP PLASTIC DELRIN SHUTOFF VALVE /8 Non Vented /4 Non Vented STAINLESS STEEL SHUTOFF VALVE /8 with Stop /4 with Stop HOSE CLIPS Used for 2 hose or 3 hose systems. D255658NP - Dual Hose Clip D255657NP - Triple Hose Clip /8 Alternating Clip /4 Alternating Clip PAGE 12 VER TO ORDER, PHONE

15 PULSTAR PULSATOR NuPulse offers a simple, easy to install vacuum operated pulsator with adjustable pulsation. Works with any conventional claw. With only 4 moving parts, the PulStar provides dependable, low-maintenance service without any electrical wiring or controls. Adapters are available to fit all the major brands of stall cocks. DOUBLE OUTLET PARLOR PULSATOR For permanent installation in Parlors. Each PulStar will operate 2 milker units NP Double SINGLE OUTLET STANCHION BARN PULSATOR Select from Stall Cock Adapters listed below NP Single MZ12001NP PULSTAR ADAPTERS MZ12001NP MZ10007NP PulStar Dome Spring DeLaval MZ10005NP Diaphragm Complete M10080NP Adapter Only MZ10207NP PulStar Bobbin MZ10007NP MZ10005NP Surge/Choreboy 10080NP Adapter Complete M10084NP Adapter Only O-Ring MZ10009NP MZ10213NP MZ10028NP MZ10011NP Bobbin O-Ring PulStar Bobbin Housing Air Filter Bobbin Valve MZ10207NP MZ10009NP Universal Side Entry 10082NP Adapter Complete M10082NP Adapter Only MZ10009NP O-Ring MZ10012NP MZ10014NP MZ10209NP MZ10212NP Bobbin Clip Middle O-Ring PulStar Base - Dual Outlet PulStar Base - Single Outlet MZ10213NP Universal Top Entry M10090NP PulStar Mounting O-Ring MZ10028NP 10081NP Adapter Complete M10081NP Adapter Only MZ10009NP O-Ring MZ10011NP MZ10012NP MZ10014NP MZ10212NP -OR- BouMatic 10083NP Adapter Complete M10083NP Adapter Only O-Ring MZ10209NP 10120NP PulStar Repair Kit PULSATION CLAW ADAPTER Used to convert alternating pulsation claws to simultaneous pulsation M10090NP 10088NP TO ORDER, PHONE VER PAGE 13

16 MINI MILKER SYSTEMS The NuPulse Portable Milking Systems come complete with a vacuum pump and motor, adjustable regulator, vacuum gauge, vacuum reserve tank, stainless steel or plastic bucket, stainless steel lid, milker claw, shells, inflations and all necessary hoses. There are two sizes of electric pumps to choose from, two different stainless steel bucket sizes and one plastic bucket option. There are options for cow or goat systems. Both the 3/4 HP and 1 HP options will operate up to two buckets at a time. These systems are perfect for exhibitors or small farms. 3/4 HP MINI PUMP E-Zee NuPulse offers a 3/4 HP Mini Pump Assembly consisting of a heavy duty electric motor and oil less vacuum pump, mounted on a stainless steel moisture trap and vacuum reserve tank. An oil less type vacuum pump with adjustable regulator and vacuum gauge is direct coupled to the motor. The motor is supplied with a 9 ft. three-prong wire power cord for 120V AC operation. The vacuum tank has a clear plexi lid for easy viewing into the tank. The tank bottom is equipped with 2 support legs for stability. Note: Shipped by UPS and some assembly required. 3/4 HP PUMP AND PORTBLE PUMP UNITS 3/4 HP MINI PUMP SPECIFICATIONS 41000NP - 3/4 HP Mini Pump and Motor (weight 75 lbs) 10197NP - with 1 x 65 lb Bucket and NuPulse Cow Claw 10179NP - with 2 x 65 lb Buckets and NuPulse Cow Claws 10181NP - with 2 x 65 lb Buckets and 4 x NuPulse Goat Claws 10182NP - with 1 x 68 lb Plastic Bucket and NuPulse Cow Claw 10183NP - with 2 x 68 lb Plastic Buckets and NuPulse Cow Claw Oil less operation Internal filters Operate between 32 F F (0 C - 40 C) 12.5 vacuum produces approximately 6 CFM 9.1 amp draw at 120V AC 60HZ 1 HP DELUXE PORTABLE PUMP This portable pump is a heavy duty unit and can be wheeled almost anywhere you need to go. It comes with a Conde #3 Vacuum Pump and a 1 HP Farm Duty Motor on a cart with 10 air tires, and plugs into standard 110V/15Amp outlet. UNITS ARE SHIPPED FULLY ASSEMBLED BY TRUCK Deluxe Portable Pump Unit Nylon 5/8 to 1/2 Reducer (1 Ea REQ D when used with NuPulse Bucket Unit) /2 Clear Glitex Tubing (6 are REQ D when used with NuPulse Bucket Unit) Can be used with Bucket Systems on following page in addition to more bucket options found in the 2019 E-Zee Milking Equipment Catalog. PAGE 14 VER TO ORDER, PHONE

17 BUCKET UNITS NUPULSE COW BUCKET UNITS All NuPulse Cow Bucket Units come complete with a bucket, stainless steel lid, shells, inflations, hoses & claw. This unit can be attached directly to a mini pump or to the milk line. The NuPulse Standard Milker units only use one line for milk and vacuum, therefore eliminating additional vacuum hoses NP - 65 lb SS Bucket w/original Std Claw 10154NP - 68 lb Plastic Bucket w/original Std Claw 10158NP - 65 lb SS Bucket w/fuflo PP Claw with Shutoff and Silicone Hose 10153NP - 35 lb SS Bucket w/original Std Claw 10157NP - 55 lb SS Bucket w/original Std Claw 10159NP - 35 lb SS Bucket w/fulflo Claw with Shufoff and Silicone Hose NUPULSE GOAT BUCKET UNITS All NuPulse Goat Bucket Units come complete with a bucket, stainless lid, hoses and NuPulse Goat Milker Claw. This unit can be attached directly to a mini pump or to the milk line. The NuPulse Goat Milker units only use one line for milk and vacuum, therefore eliminating additional vacuum hoses NP - 65 lb SS Bucket w/2 Goat Claws Complete 10155NP - 68 lb Plastic Bucket w/goat Claw Complete 10152NP - 35 lb SS Bucket w/goat Claw Complete 10156NP - 35 lb SS Bucket w/2 Goat Claws Complete STAINLESS STEEL BUCKET All buckets are made of 304 grade stainless steel and come with a short handle lb Bucket /2 W x 18 1/2 H lb Bucket /4 W x 18 1/2 H lb Bucket /2 W x 13 3/4 H 304 STAINLESS STEEL BUCKETS PLASTIC BUCKET This 68 lb Bucket allows full view of the milk collected. Can be used for fresh cows. NOTE: No warranty on the Plastic Buckets with Short Handle with Long Handle BUCKET WASHER For washing the NuPulse claws in a portable setup. Mounts on the wall, above a wash sink. A hot water source and a vacuum source are needed to operate NP - Bucket Washer for Standard Cow Claw 10126NP - Bucket Washer for Goat Claw STAINLESS STEEL LIDS Stainless Lid with Gasket and 2 x 5/8 90º Inlets & Handle (Includes Checkball and Cage) Stainless Lid with Gasket and 3 x 5/8 90º Inlet & Handle (Includes Checkball and Cage) (For use with Goat Claws ONLY) Replacement Gasket for SS Lid Cage (attaches under lid) Checkball A40519NP - 5/8 Brush for Pail Inlets FRESH COW LID Fresh Cow Lid with Gasket & Checkball Replacement Gasket for Plastic Lid Cage Checkball BUCKET WASHER REPLACEMENT PARTS See Pages 10 & 11 for Jetter Breakdown /8 Plastic Tubing P02513NP - 3/16 x 5/16 Plastic Tubing M01950NP - 1/4 ID Rubber Grommet MZ10525NP - Modified Inflation Plug Restrictor Plug Stainless Weight 4.5 oz TO ORDER, PHONE VER PAGE 15

18 Mini Pump Replacement Parts P41011NP P41040NP P11199NP P41024NP OR P41034NP Replacement parts still available for the 1/4HP Pump P11305NP OR P11309NP P41015NP P41016NP P41028NP OR P41038NP P41050NP OR P41051NP P41020NP OR P41030NP P41005NP, P41006NP, P41007NP, P41008NP P11310NP P41021NP P41025NP P41022NP Gasket for Plexi Lid /8 Clear Tubing - 2 ft /8" Pipeline Nipple Closure Vacuum Gauge /8 X 2 Galvanized Nipple P41008NP P41015NP P41016NP P41020NP Stainless Rod (with cotter pin) Vacuum Tank with Lid, Gasket, Clip & Handle Plexi Lid Vane for 3/4HP Mini Pump (4 Required) P41050NP Black Muffler for 3/4HP Mini Pump P41030NP Vane for 1/4HP Mini Pump (4 Required) P41051NP Black Muffler for 1/4HP Mini Pump P41021NP End Cap P11305NP Manifold Assembly for 1/4HP Mini Pump P41022NP Filter Felt P11309NP Manifold Assembly for 3/4HP Mini Pump P41024NP Service Kit for 3/4HP Mini Pump P11310NP Mini Pump Vacuum Moisture Trap P41034NP Service Kit for 1/4HP Mini Pump P41011NP Brass Relief Valve - 3/8 NPT P41025NP O Ring for End Cap P11199NP 3/4 HP Mini Pump & Motor with Filter & Cord P41028NP Motor Housing Gasket for 3/4HP P41005NP Bolt (with loop) P41038NP Motor Housing Gasket for 1/4HP P41006NP Lid holder disk (with hole) P41040NP Capacitor Only P41007NP Wingnut P01236NP Cord with 3-Prong Plug (Not Shown) PAGE 16 VER TO ORDER, PHONE

19 Mini Milker with Bucket Milker 1 MZ10057NP Super Inflations for Cow Claw 1 MZ10050NP Smith 16 Inflations for Goat Claw 2 MZ20705NP Stainless Heavy Shells for Cow Claw 2 MZ10047NP Stainless Light Shells for Goat Claw 3 MZ13160NP Short Air Tubes NP Original Standard Claw NP Goat Claw /8 Squeeze Clamp 6 MZ13162NP Premium Milk Hose (3 Ft) lb SS Bucket w/short Handle lb SS Bucket w/short Handle lb Plastic Bucket w/short Handle 9 P41015NP Mini Vacuum Tank Gasket for Plexi Lid P41016NP Plexi Lid /8 Glitex Tubing (9 Ft & 2 Ft for Pump) 13 P11199NP 3/4 HP Pump & Motor w/filter & Cord 14 P01236NP Cord with 3 Prong Plug 15 P41010NP 2 Vacuum Gauge 16 A40519NP Brush for Pail Lid Inlet /8 Stainless Trap Lid with Checkball /8 Lid w/3 Inlets (For Goat Units Only) N/S Replacement Lid Gasket N/S 10217NP Vacuum Check Valve - OPTIONAL TO ORDER, PHONE VER PAGE 17

20 Takeoffs WAIKATO TAKEOFF The Waikato Takeoff prevents over milking and allows more effective use of available labor. The vacuum is reduced to a safe level before the milker unit is removed. Available in both Parlor and Stanchion Barn Models Waikato Takeoff, Complete with Sensor & Stainless Cylinder New Style STAINLESS STEEL Vacuum Cylinder Assembly Sensor Unit Assembly The PVC Vacuum Cylinder Assembly Complete or PVC Cylinder Body Only are no longer available. Replacement parts for PVC assembly can still be purchased, however, they are NOT interchangeable with the new style SS Vacuum Cylinder Assembly listed above which is a more narrow cylinder. The Stanchion Barn Kit converts the Waikato Takeoff into a portable takeoff. Fully vacuum operated and CIP washable. Total weight - 6 pounds NP - Stanchion Barn Kit (Includes: Hose Guide, Double Hanger, Claw Hook, Nylon Pulley with Bushing, Hose Clamps, Vacuum Tap, Carrying Handle and Vacuum Hoses) WAIKATO SENSOR UNIT & OLD STYLE PVC CYLINDER PARTS Waikato Sensor Cover Valve Head Sensor Float Assembly Sensor Body Bridle Clip Bung Timer Lever with Bung Float Lever with Bung (pictured) Sensor Holder Bracket SP ORD or Nipple Bracket 10 SP ORD Cylinder with Nipple and Bracket SP ORD Bayonet Bracket Piston Seal SP ORD SP ORD Piston Assemble Cord Bayonet with Pulley Cluster Clip /8 Clear Tubing D03233NP Double Hanger Hose Clamp (3 on unit) 20 D03234NP Cylinder Hose Guide with Claw Hook for ATO D32344NP Handle 22 D32342NP Vacuum Tap D32345NP 5/16 Check Valve (Not Shown) Reset Timer for Waikato Takeoff (Not Shown) Milk Line Filter (Not Shown) Screen for Waikato Milk Line Filter (Not Shown) PAGE 18 VER TO ORDER, PHONE

21 Takeoffs ALLFLEX TAKEOFF REPLACEMENT PARTS 1 D32150NP Drain Plug 2 D32118NP Allflex Canister Clip 3 D32122NP Allflex Canister 4 D32120NP Snorkel for Allflex Sensor 5 D32115NP O-Ring for Sensor Manifold 6 D32103NP Allflex Manifold w/o-ring & Clip 7 D32111NP Outlet Body Assembly 8 D32094NP Sensor Thrust Washer/Spacer 9 D32116NP Valve O-Ring (Old Style Only) 10 D32095NP Inlet Valve Activator 11 D32096NP Inlet Valve Slide 12 D32097NP Inlet Valve Body w/slide & O-Ring 13 D32107NP Valve Lever & Cord 14 D32113NP Dust Cover 15 D32114NP Allflex Sensor Diaphragm 16 D32112NP Diaphragm Cap 17 D32117NP 5/8 Inlet Stub O-Ring 18 D32119NP Diaphragm Clip 19 D32109NP Counterweight Assembly 20 D32102NP Bracket for Allflex Sensor 21 D32108NP Circlip for Allflex Counterweight 22 D32110NP Sensing Tube N/S D32139NP 90º Bend Adapter N/S Stainless Cylinder N/S SS Bracket Allflex Takeoffs are no longer available, but a limited number of replacement parts are still available. ALLFLEX SENSOR UNIT 22 TO ORDER, PHONE VER PAGE 19

22 REFLEX Designed by NuPulse, the REFLEX senses the vacuum level in the milking system and controls the speed (RPM) of the electric motor driving the pump which runs just fast enough to produce the needed air flow at the set vacuum level. As the need for air flow is introduced by the attachment and detachment of milker units, and activation of takeoffs, the controller causes the vacuum pump to change speed accordingly. The result is a smooth, quiet vacuum pump operation which maintains a very stable level in the system and costs considerably less to operation. On farm experience has shown as much as 70% reduction in electrical usage by the vacuum pump. Generally, an operation with a milking time of 10 hours per day will realize a payback within two years. In addition to the energy savings and quick payback, the REFLEX system greatly reduces the noise of the vacuum pump as well as extends its life. With the built-in illuminated digital vacuum gauge, you can easily see the vacuum stability and fast response time. The vacuum level is held steady and true. DELUXE DRIVE SYSTEMS STAND ALONE-DRIVE UNITS Picture below shows Deluxe REFLEX VSD with OPTIONAL Line Reactor and RFI Filters installed NP Deluxe 7.5HP 230V 1 Phase P29040NP REFLEX Circuit Board Only Line Reactors and 29601NP Deluxe 7.5HP 230V 3 Phase 29495NP REFLEX Controller RFI Filters are 29603NP Deluxe 7.5HP 460V 3 Phase 29505NP 7.5HP 230V 3 Phase NOT included in 29609NP Deluxe 10HP 230V 1 Phase 29510NP 10HP 230V 3 Phase any packages and 29610NP 29612NP 29614NP 29615NP 29620NP 29625NP 29628NP Deluxe 10HP 230V 3 Phase Deluxe 10HP 460V 3 Phase Deluxe 15HP 230V 1 Phase Deluxe 15HP 230V 3 Phase Deluxe 20HP 230V 3 Phase Deluxe 25HP 230V 3 Phase Deluxe 30HP 230V 3 Phase 29515NP 29520NP 29525NP 29528NP 29529NP 29530NP 29535NP 15HP 230V 3 Phase 20HP 230V 3 Phase 25HP 230V 3 Phase 30HP 230V 3 Phase 40HP 230V 3 Phase 5HP 230V 1 Phase 7.5HP 230V 1 Phase must be ordered separately. See following page. Note: These are recommended on systems with Parlor ID NP Deluxe 40HP 220V 3 Phase 29540NP 10HP 230V 1 Phase 29631NP Deluxe 20HP 220V 1 Phase 29545NP 15HP 230V 1 Phase 29650NP Deluxe 15HP 460V 3 Phase 29547NP 20HP 230V 1 Phase 29655NP Deluxe 20HP 460V 3 Phase 29550NP 15HP 460V 3 Phase 29660NP Deluxe 25HP 460V 3 Phase 29555NP 20HP 460V 3 Phase 29675NP Deluxe 30HP 460V 3 Phase 29560NP 25HP 460V 3 Phase All Reflex Drives currently sold are Frenic MEGA Drives. P11 Drives were sold until late 2013/early Replacement parts for the P11 Drives are still available NP 29580NP 30HP 460V 3 Phase 40HP 460V 3 Phase PAGE 20 VER TO ORDER, PHONE

23 REFLEX Vacuum Pump VSD Systems RFI FILTER FOR DELUXE REFLEX INVERTER CABLE/SHROUD/NEMA P09600NP P09610NP P09615NP P09620NP P09624NP 7.5HP 460V 18A 10HP 460V 25A 7.5HP 230V and 15HP 460V 33A 10HP 230V and 20 & 25HP 460V 50A 15HP 230V and 30HP 460V 70A 29702NP 29704NP 29706NP VSD Cable 12AWG 4 Conductor 30A cont For 5, 7.5 & 10HP (230V) and 10, 15 & 20HP 460V) VSD Cable 8 AWG, 4 Conductor 55A cont For 15 & 20HP (230V) and 25 & 30HP (460V) VSD Cable 4 AWG, 4 Cond 95A cont - 25 & 30HP (230V) P09625NP 20HP 230V 90A 29710NP 18/2 Shield Control Cable P09630NP 25 & 30HP 230V 130A P19700NP Shroud Complete for Stand-Alone Inverters LINE REACTOR FOR DELUXE REFLEX INVERTER P19725NP NEMA 1 Kit for Stand-Alone Inverters 25-40HP P09500NP 7.5HP 460V 14A P19726NP NEMA 1 Kit for Stand-Alone Inverters 5-20HP P09510NP 10HP 460V 21A P29701NP Cooling Fan for 460V AC Deluxe Reflex Cabinets P09515NP 7.5HP 230V and 15HP 460V 28A P29702NP Cooling Fan for 230V AC Deluxe Reflex Cabinets P09520NP 10HP 230V and 20HP 460V 35A P29704NP Fan Filter Kit for Deluxe Reflex Cabinets P09525NP 15HP 230V and 25HP 460V 46A P29705NP Power Disconnect Switch for Deluxe Reflex Cabinets P09530NP 20HP 230V and 30HP 460V 55A P09535NP 25HP 230V 65A P09540NP 30HP 230V 83A SPD SURGE PROTECTION DEVICES FOR REFLEX P29712NP 220V 3Ph LESS Enclosure for Deluxe P29713NP 440V 3Ph LESS Enclosure for Deluxe P29714NP P29714NP 29805NP 29810NP 220V 3Ph WITH Enclosure for Stand-Alone 440V 3Ph WITH Enclosure for Stand-Alone BYPASS UNITS EZ Bypass Unit, 32 Amps For 5 & 7.5HP (230V) and 10 & 15HP (460V) EZ Bypass Unit, 65 Amps For 10, 15 & 20HP (230V) and 20, 25 & 30HP (460V) P29709NP Thermostat for Cooling Fan on Deluxe Cabinet P29710NP Foam Only for Fan Filter Kit on Deluxe Reflex P26030NP VSD Cable 10 AWG, 4 Conductor Special Order For 10 & 15HP - 230V or 20 & 25HP - 460V Pin Terminal for REFLEX Enclosure (Not Shown) Pin Terminal for REFLEX Enclosure (Not Shown) P02511NP 3/16 Brass Barb for REFLEX Enclosure (Not Shown) P02921NP Heyco Threaded Plug for REFLEX Encl (Not Shown) 40452NP Screw for Standoff on REFLEX Encl (Not Shown) One Control Relay Complete is REQUIRED with Bypass Units P29750NP Control Relay Complete - 12V AC/DC P29751NP Control Relay Complete - 24V AC/DC P29752NP Control Relay Complete - 120V AC/DC P29753NP Control Relay Complete - 230V AC/DC 29815NP EZ Bypass Unit, 80 Amps - For 25 & 30HP (230V) EZ Bypass Unit (For 3 Phase Systems) TO ORDER, PHONE VER PAGE 21

24 ImPulse CL Milk Pump VSD System CL Probe & Float Assy The ImPulse CL Milk Pump Controller System is a 100% tunable probe level VSD system. The ImPulse CL is a Continuous Level Variable Speed Milk Pump System using a probe which communicates a 4-20ma signal with 1 resolution. Probes are available in four sizes. The CL allows you to have different Min/Max speed settings for Milk and Wash which allows you to optimize your milk cooling capabilities and can be customized for each receiver. The CL offers an optional Overflow Alarm feature to alert if the receiver starts to flood as well as a clean-in-place (CIP) feature for PD Milk Pumps. ImPulse CL Controller IMPULSE CL PROBE ASSEMBLIES NOTE: Actual Probe length entering into the receiver is 2 shorter than measurement noted NP 24 CL Probe & Float Assy 34903NP 30 CL Probe & Float Assy 34904NP 40 CL Probe & Float Assy Our ImPulse CL is a true continuous level or continuous float system similar to OptiFlo and Dairy Master and features extra wash settings. IMPULSE CL CONTROLLERS LESS PROBE 34906NP 60 CL Probe & Float Assy 35150NP 2HP 230V Dual 1 & 3 Phase IMPULSE CL OPTIONAL & REPLACEMENT PARTS R03402NP Sensing Strip for 24 ImPulse CL Probe R03403NP Sensing Strip for 30 ImPulse CL Probe R03404NP Sensing Strip for 40 ImPulse CL Probe 35155NP 35160NP 35165NP 35170NP 3HP 230V Dual 1 & 3 Phase 2HP 460V 3 Phase 3HP 460V 3 Phase 5HP 460V 3 Phase R03406NP R35505NP R35506NP R35510NP R03517NP R03518NP R35450NP Sensing Strip for 60 ImPulse CL Probe Deluxe Alarm - Amber Strobe & Audible Deluxe Alarm - Red Strobe & Audible Economy Alarm - Red LED & Audible Tone IDEC Rotary DP-DT Switch IDEC Black Push Button Momentary DP-ST Swtich ImPulse CL SD Programming Module ImPulse CL Probes work with competitor systems with minimal adjustments. R35451NP ImPulse CL Communications Module R35500NP ImPulse CL Keypad R03509NP 1.5 SS Float with Magnet 1.5 OD x 1.5 OD x ID Rubber Probe Holder with.5 Hole 29700NP VSD Cable, 16 AWG, 4 Conductor, 12A Cont - per ft NP 18/2 Shielded Control Cable - per ft. Inside View IMPULSE CL REPLACEMENT INVERTERS (LESS KEYPAD) R03630NP 2HP 230V CL Inverter Only 1 & 3 Phase R03631NP 3HP 230V CL Inverter Only 1 & 3 Phase R03632NP 2HP 460V CL Inverter Only 3 Phase R03633NP 3HP 460V CL Inverter Only 3 Phase R03634NP 5HP 460V CL Inverter Only 3 Phase PAGE 22 VER TO ORDER, PHONE

25 ImPulse CL & ImPulse III Parts ALARMS FOR BULK TANKS Designed for dairy operations utilizing 2 to 4 bulk tanks. The E-Zee Bulk Tank Overflow Alarm alerts the operator that the current bulk tank is nearing capacity and needs to be switched over to the other tank which prevents overflowing of bulk tank. The ImPulse III SK Drives are no longer available, however, the Probes and replacement parts may still be ordered. IMPULSE III PROBE ASSY & REPLACEMENT PARTS NOTE: Actual Probe length entering into the receiver is 2 shorter than measurement noted. R35515NP Overflow Alarm Controller for 2 Tanks 35002NP 24 Liquid Level Probe & Float Assy R35515NP-1 Overflow Alarm Controller for 3-4 Tanks 35003NP 30 Liquid Level Probe & Float Assy R35525NP Bulk Tank Alarm Probe Assembly 16 Long Custom lengths are available NP 35006NP 40" Liquid Level Probe & Float Assy 60 Liquid Level Probe & Float Assy R03532NP Single NC Reed Assy for Bulk Tank Alarm R03513NP 2 SS Float with Magnet 2 OD x 2 OD x ID R35517NP LOW CHEMICAL ALARMS Low Chemical Alarm Controller for 4 Tanks R03509NP R03512NP 1.5 SS Float with Magnet 1.5 OD x 1.5 OD x ID 1/2 Stainless Hair Pin Clip 40116NP Chemical Probe with Pickup Tube R03502NP Economy Alarm LED Buzzer Only - No Box 40119NP 40120NP Chemical Probe with Rubber Probe Holder Chemical Refill Probe Chemical Probes are shown on Page 25. R03503NP DPST Momentary Switch - Sealed 1/4 Spade R03504NP Bulk Tank Cover Plug - Black Rubber Rubber Probe Holder with.5 Hole Alarms shown above and below are also suitable for many other dairy applications. M01550NP P29753NP R03517NP ID Communications Cable - per ft. Control Relay Complete - 230V AC/DC IDEC Rotary DP-DT Switch R35505NP R35506NP R35510NP 2903NP M01549NP EXTERNAL ALARMS Deluxe Alarm, Amber Strobe & Audible 24V DC, V AC Deluxe Alarm, Red Strobe & Audible 24V DC, V AC Economy Alarm, Red LED & Audible Tone, 12 to 24V DC 18/2 Unshielded Cable - Needed to connect probes to alarms 18/3 Unshielded Cable - Needed for Deluxe Alarm when sharing with ImPulse CL or other device R03518NP 20981NP R20971NP R20960NP R20986NP R20988NP R02095NP IDEC Black Push Button Momentary DP-ST switch NUPULSE LIQUID LEVEL CONTROL REPLACEMENT PARTS FOR 2 PROBE SYSTEMS LLC Board with Mounting Plate f/2 or 3 Probes LLC Circuit Board Only With Wire Assy 18/3 x 8' Cord for LLC Board Toggle Switch for 2 Probe System Wiring Diagram for LLC Board LLC Mounting Plate 20981NP R20971NP TO ORDER, PHONE VER PAGE 23

26 Kleen Flo Pipeline Wash System The Kleen Flo Wash System will clean any size pipeline milking system. Every segment of every cycle of the Pipeline Washing can be adjusted to the needs of the dairy. The Kleen Flo lowers the cleaning costs of many systems by reducing waste water, eliminating excess vacuum pump run time, consistently dispensing the correct amount of chemicals for every wash, and catching water heater failures before they create high bacteria counts. You will save on water and can also add an additional Diverter to use the wash water for cleaning the dairy. The Kleen Flo Wash Controller has an easy-to-navigate layout with touch-screen display which reduces confusion for the operator. The pre-programmed defaults save time, and changes are simple to make to effectively and efficiently clean your milking system. NEW 40114NP FEATURES:» 3 Formulas - Up to 7 Cycle Wash Programs for each.» Easy Programming» Temperature Controlled Fill, Monitoring Temps for both Milk & Wash Alarm Feature Add More Water Feature Programmable Pre-Sanitizer Start Times Divert Rinse Water Automatic Chemical Dispensing Supports 2-Part Wash Chemicals Automatic Wash Cycling or Manual Wash Skip a Cycle Programmable Hot Acid Rinse Low Low Chemical Alarm Capable of controlling 220V, 24V, and 12V System Devices 3/4 NPT Dema 120V AC Valve, Gal/Min WATER VALVES 40100NP 40103NP 40105NP KLEEN FLO WASH SYSTEMS Kleen Flo Pipeline Wash Control Panel 120V AC WITH 3-Unit 30oz. PPU, Pressure Switch, Temperature Sensor and 2 x 3/4 Water Valves Kleen Flo Pipeline Wash Control Panel 120V AC WITH Pressure Switch and Temperature Sensor Kleen Flo Pipeline Wash Control Panel Only 120V AC 15amp 15 Fused Outputs, Touch Screen HMI/PLC Modular Control System NPT EZ Solenoid Valve 120V AC /2 NPT Solenoid Valve 120V AC V AC Coil for Blue Water Valve Blue Water Valve 120V AC Dual Coils Single Water Valve 120V AC TEMPERATURE SENSORS 40109NP WASH Temperature Sensor Assy 40106NP MILK Temperature Sensor Assy TESTING & SERVICE KIT 40117NP Kleen Flo Wash Control Test & Support Pkg - Includes Flash Drive with Software & Manuals for support/updates, Tools to test/operate inputs for function testing, and Computer Cable for HMI. ONE KIT for EACH Service Person in the field is recommended. PAGE 24 VER TO ORDER, PHONE

27 Kleen Flo Wash System Parts CHEMICAL PROBES Custom-length probes can be ordered if more than 39 length is needed NP Low Chemical Alarm Probe with Chemical Pickup Tube for up to 39 Tanks (Std 275 Gal) 40119NP Chemical Probe with Rubber Probe Holder AIR INJECTORS Kleen Flo 100 Air Injector Pkg with Control Box & 1.5 Stainless Remote Valve LESS Timer Board Kleen Flo 100 Air Injector Pkg with Control Box & 2 Stainless Remote Valve LESS Timer Board 31850NP-1 Whisper Jet Air Injector LESS Timer 40120NP 40157NP 40155NP 40115NP Chemical Refill Probe 1/4 PVC Schedule 80 Chemical Resistant Pipe.50 OD 1/4 Socket Coupling PVC Schedule 80 Pipe 40119NP 40116NP CHEMICAL DISPENSERS Kleen Flo Wash 30 oz Min. P.P.U. Dispenser 120V AC 3 Unit Dairy Pro WITHOUT Timer CB Slugger Air Injector Assy for Single 3 Line (Requires 2 Air Injector) Slugger Air Injector Assy for Single 4 Line (Requires 2 Air Injector) EXTERNAL ALARMS R35505NP Deluxe Alarm, Amber Strobe & Audible 24V DC, V AC R35506NP Deluxe Alarm, Red Strobe & Audible 24V DC, V AC Kleen Flo Wash 50 oz Min. P.P.U. Dispenser 120V AC 3 Unit Dema WITHOUT Timer CB 40118NP Bender 3-Jar Chemical Dispenser f/powder or Liquid Chemicals with Water Valves DRAIN VALVES & DIVERTERS V AC Depend-O-Drain, Normally OPEN, Black Splash Cover, Plate Flapper Style V AC Depend-O-Drain, Normally OPEN, Gray Motor Cover, Ball Style Bender Diverter Assembly, 120V AC NP 40118NP WATER FILL LEVEL SWITCHES 40107NP Pressure Switch Assy - Use with Peristaltic Pump Unit 40108NP Pressure Switch Assy - Use w/bender Jar Unit R35525NP Bulk Tank Alarm Probe Assy 16 Long SWING PIPE SWITCH 31700NP 2 Clamp Diverter Valve Complete CONTROLLER PARTS 40112NP 4.3 Touch Screen Display - HMI 40110NP CPU - PLC 40111NP 8 Output Module 40113NP Display Com Cable P29751NP Control Relay Complete 24V AC/DC - Consists of: P19801NP - Relay Only P19803NP - Holder for Relay Honeywell Limit Switch 40137NP Cartridge Fuse 250V 5A 5x20mm Fast Acting TO ORDER, PHONE VER PAGE 25

28 120 V / 60 Hz Amp Rating Pump Rate Fill Rate at 40 psi Connecting Water Hoses 24-Hour Timer For Sanitize Model 3 Tank Washer Model 4 Tank Washer Model 12 Pipeline Washer Model 23 Pipeline Washer Model 31 Pipeline Washer Model 32 Pipeline Washer Dairy Pro Peristaltic Pump Unit Dema Peristaltic Pump Unit 15 Amp 15 Amp 5 Amp 15 Amp 5 Amp 5 Amp 5 Amp 5 Amp 5.29 GPM 33 GPM 5.29 GPM 5.29 GPM See Water Valves on Page 34 1/2 ID 1 ID 1/2 ID 3/4 ID 3/4 ID 1/4 OD 3/8 OD 7.37 GPM Pressure Switch Number of Chemicals Extra Cam Timer Switches GENERAL SPECIFICATIONS OF THE AUTOMATIC WASH SYSTEMS GPM GPM = Gallons per minute OPM = Ounces per minute ID = Inside Diameter OD = Outside Diameter 32 OPM 50 OPM Automated Washing Systems PAGE 26 VER TO ORDER, PHONE

29 MODEL 12 PIPELINE WASHER The Model 12 Pipeline Washer is designed to automatically clean or sanitize dairy farm pipelines with a minimum of labor and expense NP FEATURES Wall mounting of control panel keeps components away from the corrosive environment near the wash vat. The Model 12 is internally fused for added safety. One piece manifold directs water without problems of leaking hoses. The fully programmable Cam Timer makes it easy to tailor the Model 12 to the requirements of each dairy operation. BENEFITS Timer assembly, switches, and motor can be replaced individually - no need to replace entire unit. Assures proper water level in wash vat regardless of fluctuations in water pressure. OPTIONAL ACCESSORIES Diverter Assembly Depend-O-Drain Valve Air Injector NP NP NP NP DPDT 3 Position Switch NP Manifold Assembly NP Valve Operator Assembly NP Pressure Switch Replacement Kit NP Adjustable 8-Cam Timer Assembly (No Segments) NP Model 12 Tank Washer Breakdown of Model 12 Manifold Assembly can be found on Page 37. Breakdown of Timer Assembly can be found on Page NP NP TO ORDER, PHONE VER PAGE 27

30 MODEL 32 HI-FLOW PIPELINE WASHER NP FEATURES Wall mounting of control panel keeps components away from the corrosive environment near the wash vat. The Model 32 is internally fused for added safety. One piece manifold directs water without problems of leaking hoses. The fully programmable Cam Timer makes it easy to tailor the Model 32 to the requirements of each dairy operation. The Model 32 has all of the above, plus increased GPM for fast fills. BENEFITS Timer assembly, switches, and motor can be replaced individually - no need to replace entire unit. Assures proper water level in wash vat regardless of fluctuations in water pressure. gallonage regardless of water supply fluctuations. The Model 32 Pipeline Washer is designed to automatically clean or sanitize dairy farm pipelines with a minimum of labor and expense. OPTIONAL ACCESSORIES Diverter Assembly Depend-O-Drain Air Injector NP NP NP NP NP NP NP DPDT 3 Position Switch 120V Coil for Valve Operator Manifold Assembly Pressure Switch Replacement Kit NP Adjustable 8-Cam Timer Assembly (No Segments) NP Model 32 Tank Washer Breakdown of Model 32 Manifold Assembly can be found on Page 39. Breakdown of Timer Assembly can be found NP on Page NP PAGE 28 VER TO ORDER, PHONE

31 MODEL 31 HI-FLOW PIPELINE WASHER FEATURES NP Wall mounting of control panel keeps components away from the corrosive environment near the wash vat. The Model 31 is internally fused for added safety. One piece manifold directs water without problems of leaking hoses. The fully programmable Cam Timer makes it easy to tailor the Model 31 to the requirements of each dairy operation. Equipped with a relay to isolate the 220 magnetic starter voltage on the vacuum pump from the cabinet. BENEFITS Timer assembly, switches, and motor can be replaced individually - no need to replace entire unit. Assures proper water level in wash vat regardless of fluctuations in water pressure. OPTIONAL ACCESSORIES Diverter Assembly Depend-O-Drain Air Injector The Model 31 Pipeline Washer is designed to automatically clean or sanitize dairy farm pipelines. The 24 hour sanitize timer allows the user to choose and set the time of day the pipeline will be automatically sanitized NP NP DPDT 3 Position Switch NP NP NP NP Fuse Holder NP 24 Hour Mechanical Timer with Leads NP Manifold Assembly NP Pressure Switch Replacement Kit NP Adjustable 12-Cam Timer Assembly (No Segments) NP Model 31 Tank Washer Breakdown of Model 31 Manifold Assembly can be found on Page 38. Breakdown of Timer Assembly can be found on Page NP NP TO ORDER, PHONE VER PAGE 29

32 MODEL 23 CONTROL PANEL NP FEATURES Wall mounting remote from wash vat. Internally fused. Fully programmable mechanical cam timer. Individual cam switches for component control. Vacuum pump control relay. Terminal strip for component connection. Pressure switch water level control. Equipped with a relay to isolate the 220 magnetic starter voltage on the vacuum pump from the cabinet. BENEFITS Easy to tailor the washing cycles to fit the requirements of the system. The Model 23 Pipeline Washer is designed to automatically clean and sanitize dairy farm pipelines with a minimum of labor and expense. The 24 hour sanitize timer allows the user to set the time of day the pipeline will be automatically sanitized. The modular unit can be connected to dairyman s choice of remote water and chemical systems. Is not affected by power outages or electronic freeze-ups. More reliable and lower replacement costs. Easier and faster installation. Assures proper water level in wash vat regardless of fluctuations in water pressure. OPTIONAL ACCESSORIES Peristaltic Pumps External Water Valves Diverter Assembly Depend-O-Drain Valve Air Injector NP NP NP NP NP DPDT 3 Position Switch Relay, 10 Amp NP Fuse Holder NP 24 Hour Mechanical Timer with Leads NP Pressure Switch Repl. Kit NP Model 23 Control Panel NP Adjustable 12-Cam Timer Assembly NP NP NP Breakdown of Timer Assembly can be found on Page 35. Water Valve Options can be found on Page 36. PAGE 30 VER TO ORDER, PHONE

33 PERISTALTIC PUMPS DAIRY PRO DEMA NP MODEL 23 Two models of Peristaltic Pumps are available for dispensing chemicals from their containers into the wash vat. The #79332 Dairy Pro 3000 model delivers 32 ounces per minute while the #79350 Dema model delivers 50 ounces per minute for larger systems. The pumps are mounted in an enclosure which houses the motor and electric timers. Pumps can be remotely mounted in the most desirable locations. Signal to operate the pumps is supplied from the Model 23 Control Panel which is pre-set for Wash Cycles of a normal CIP milk receiver system. Timer segments can be used to adjust for your individual operation needs. Precise dispensing is achieved because each unit houses electronic timers mounted inside the peristaltic pump panel. The electronic timers control the run time of the peristaltic pump to the precise amount of time needed for the desired amount of chemical. Units consists of three pumps for each of three cycles: Detergent, Sanitize and Acid. FEATURES Precisely controls chemical dispensing Closed chemical handling systems Long-life flexible tubing Pump mounted externally Individually fused BENEFITS Can reduce chemical usage Reduces the danger to personnel Reduces the required maintenance Easy to service Motor is protected Dairy Pro 3000, 32 oz. Dispenser Roller Assembly for Dairy Pro Tube for Dairy Pro /8 Tubing for Chemical Pump (100 Roll) Dema 50 oz. Dispenser - 110V AC Roller Assembly for Dema Dispenser Tubes for Dema Dispenser Not Shown Replacement Parts for OLD STYLE NuPulse Peristaltic Pump NP - Timer NP - Gear Motor for 8 oz/min NP - Tubing for 8 oz/min NP - Gear Motor for 35 oz/min NP - Tubing for 35 oz/min NP - Roller Bracket Assembly NP Model 23 Control Panel Breakdown shown on previous page. TO ORDER, PHONE VER PAGE 31

34 MODEL 3 TANK WASHER NP The Model 3 Tank Washer is an automatic bulk tank washer system designed to clean bulk tanks with a minimum of labor and expense. FEATURES Wall mounting of control panel keeps components away from the corrosive environment near the wash vat. The Model 3 is internally fused for added safety. One piece manifold directs water without problems of leaking hoses. OPTIONAL ACCESSORIES Model 4 Pumping Unit BENEFITS Timer assembly, switches, and motor can be replaced individually - no need to replace entire unit. Easy to tailor the washing cycles to fit the requirements of the system. Is not affected by power outages or electronic freeze-ups. More reliable and lower replacement costs. Easier and faster installation NP NP NP NP NP Coated Quart Jar 1/2 ID x 3 Ft. Feed Hose Manifold Assembly Adjustable 6-Cam Timer Assembly (No Segments) Model 3 Tank Washer NP Breakdown of Model 3 Manifold Assembly can be found on Page 37. Breakdown for Timer Assembly can be found on Page NP NP NP PAGE 32 VER TO ORDER, PHONE

35 Model 4 Portable Pumping Unit NP The Model 4 Pumping Unit comes with Model 10 Drain Valve as shown. The following items are not included with the Model 4 alone and need to be ordered separately. Locking Adapter NP 1-1/2 OR NP 1-9/16 1 1/2 Suction Hose Plug NP H28 Hose Clamps (3 Req d) A31394NP Spray Stick NP Non-Directional Spray, psi for Atmospheric Tanks UP TO 16 Ft. long NP Directionally Drilled Spray for Vacuum Tank OVER 16 Ft. long NP HOLDREN TANK WASHER COMPLETE Includes a Model 3 Tank Washer and Model 4 Pump Unit together and complete with items above NP NP NP Hose Clamp 5-5/8 x 6-1/2 - Special Order Power Supply Cord - 15 Ft. Pump Assembly - Special Order NP Motor Assembly NP Nylon Spray Stick Holder - Special Order NP Discharge Hose Assembly - 13 Ft NP Retainer for Spray Stick (Not Shown) NP NP OR NP NP Model 4 Portable Pumping Unit NP NP Model 10 Drain Valve Suction Hose Assembly - Includes: NP Nylon Adapter NP Nylon Nut 1-1/2 NPT NP Suction Hose 1-1/2 ID x NP Nylon Ferrule NP 1 1/2 Suction Hose Plug NP NP NP NP NP NP NP TO ORDER, PHONE VER PAGE 33

36 MODEL 4 REPLACEMENT PARTS NP NP OR NP NP NP NP NP NP NP NP NP NP NP Power Socket (Mounts in Control Box) 4-1/2 ID O Ring NP Locking Adapter 1-1/ NP Locking Adapter 1-9/ NP NP NP NP NP NP NP 15 Power Supply Cord with Plug Endplate Assembly Impeller Stainless Steel Clamp Seal Assembly Suction Hose Plug Model 10 Drain Valve PAGE 34 VER TO ORDER, PHONE

37 ADJUSTABLE CAM TIMERS NP NP NOT INCLUDED WITH NEW TIMER NP NP MODEL 3 MODELS 12 and 32 MODELS 23 and 31 CUSTOM Qty Req d Qty Req d Qty Req d Qty Req d NP 6-Cam Adjustable Timer NP 8-Cam Adjustable Timer NP 12-Cam Adjustable Timer NP 14-Cam Adjustable Timer NP Lever Switch NP Timer Knob Assembly NP 5 RPH Motor with Wire Assembly NP Timer Segment Kit (12 of ea color) NOT INCLUDED WITH NEW TIMER TO ORDER, PHONE VER PAGE 35

38 REPLACEMENT PARTS NP OR NP OR NP OR NP NP NP NP NP NP NP P02513NP NP Milk/Off/Wash DPDT 3 Position Switch NP 24-Hour Mechanical Timer with Leads NP Coated Quart Jar NP 3/4 ID x 5 Ft. Feed Hose for Hi-Flow Models 31 & 32 (2 Req d) - Special Order NP 1/2 ID x 4 Ft. Feed Hose for Model 12 (2 Req d) NP Anti-Siphon Hose Bracket for Model 12 & 23 - Special Order NP Sensing Tube Assembly NP Adapter for Sensing Tube Assembly /8 ID x 7/8 OD Glitex tubing 10 Ft required NP Pressure Switch Replacement Kit /4 EZ External Water Solenoid Valve 120V AC PSI P02513NP NP Pressure Switch Hose 3/16 x 5/16 plastic tubing - 10 ft required - for Models 12 & 23 Anti-Siphon Hose Bracket for Hi-Flow Models 31 & 32 - Special Order EZ External Water Solenoid Valve 120V AC PSI /2 EZ External Water Solenoid Valve 120V AC PSI PAGE 36 VER TO ORDER, PHONE

39 MANIFOLD ASSEMBLIES MODEL 3 and NP Manifold Assembly Complete NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP Self tapping Screw #6 x 1-1/4 (Not Shown) NP Diaphragm Replacement Kit - Includes: NP NP NP Elbow Hose Adapter 1/4 NPT - 1/2 ID Hose GHT Adapter 1/4 NPT 120V AC Coil for Hot & Cold Valve NP NP NP NP Guide Spring Armature Diaphragm NP Screen 3/4 Diameter NP Hold Down with 5 Holes NP 1/8 NPT Brass Square Head Plug NP Valve Operator Complete NP Check Plug NP Jar Gasket NP Jar Adapter NP Jar Adapter Kit (Not Shown) - Includes: NP Manifold Assembly Complete for Models 3 and NP Manifold Base ONLY for Models 3 and NP Self Tapping Screw #6 (4) NP Jar Adapter NP Jar Gasket NP Check Poppet Replacement Kit TO ORDER, PHONE VER PAGE 37

40 HI-FLOW MANIFOLD ASSEMBLIES MODEL NP Manifold Assembly Complete NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP Plastic Hex Head Plug 1/4 NPT NP Hold Down with 2 Holes NP Elbow Hose Adapter 1/2 NPT 5/8 ID Hose NP Jar Gasket NP GHT Adapter 1/2 NPT NP Check Valve Assembly NP 120V AC Coil for Valve Operator NP Diaphragm Replacement Kit - Includes: NP Brass Plug 3/ NP 9/16 ID O Ring - Inside Check Valve (Not Shown) NP 1-1/8 ID O Ring - Outside Check Valve (Not Shown) NP Screen 3/4 Diameter NP Jar Adapter NP Guide NP Spring NP Armature NP Diaphragm NP Hold Down with 4 Holes NP Manifold Assembly Complete f/model NP Manifold Base ONLY f/model NP Valve Operator Assembly PAGE 38 VER TO ORDER, PHONE

41 HI-FLOW MANIFOLD ASSEMBLIES MODEL NP Manifold Assembly Complete NP NP NP NP NP NP NP NP NP NP NP NP NP NP NP Elbow Hose Adapter 1/2 NPT 5/8 ID Hose NP Hold Down with 2 Holes NP GHT Adapter 1/2 NPT NP 120V AC Coil for Valve Operator NP Brass Plug 3/ NP NP NP Jar Gasket Check Valve Assembly Diaphragm Replacement Kit - Includes: NP 9/16 ID O Ring - Inside Check Valve (Not Shown) NP 1-1/8 ID O Ring - Outside Check Valve (Not Shown) NP NP NP NP Guide Spring Armature Diaphragm NP Screen 3/4 Diameter NP Hold Down with 4 Holes NP Jar Adapter NP Valve Operator Assembly NP Manifold Base ONLY f/model NP Manifold Assembly Complete f/model 32 TO ORDER, PHONE VER PAGE 39

42 MODEL 6 WALL MOUNT DIVERTER NP NP NP NP NP NP NP NP NP NP NP NP Diverter/Drain Valve Solenoid Replacement Kit - Includes: NP 120V AC Solenoid Valve Only NP 1/8 x 1 S.S. Cotter Key NP Terminal, Female Disconnect 3/ ga NP NP NP NP NP NP NP NP 1 ID x 12 Flexible Inlet Tube Diverter Spring Diverter Tube SS Diverter Housing Nylon Discharge Adapter Pull Rod Cover Assembly for Diverter Model 6 Wall Mount Diverter Valve NP Solenoid Cover (Cover will be aluminum effective August 1, 2017) PAGE 40 VER TO ORDER, PHONE

43 DRAIN VALVES MODEL 10 DRAIN VALVE NP MODEL 10 REPLACEMENT PARTS NP NP NP NP NP NP Diverter/Drain Valve Solenoid Replacement Kit - Includes: NP 120V AC Solenoid Valve Only NP 1/8 x 1 S.S. Cotter Key NP Terminal, Female Disconnect 3/ ga NP NP NP NP NP Tension Spring Rocker Arm Assembly Rubber Gasket Only for Rocker Arm Assembly Pull Rod Model 10 Drain Valve Complete NP Solenoid Cover (Cover will be aluminum effective August 1, 2017) DEPEND-O-DRAIN MOTORIZED DRAIN VALVE V AC, STANDARD V AC, STANDARD MOTOR FOR MOTORIZED DRAIN VALVE V AC V AC TO ORDER, PHONE VER PAGE 41

44 WHISPER JET 2" AIR INJECTOR The Whisper Jet valve is operated by vacuum which opens to allow air into the system and closes to shut the air off. Because it s a diaphragm valve, there is no metal-on-metal hammering which can create loud noises and vibration causing wear on the unit. The Whisper Jet has a solid state timer to control the ON and OFF time settings for the valve. Both solenoid and timer are provided for mounting inside an automatic washer control box NP Whisper Jet 2 Air Injector Complete with Valve & Accessory Kit * * D498743NP D498743NP 2 Valve Assembly - Only * * 30801NP Whisper Jet Accessory Kit Includes items below marked with * D243721NP * 2 V Insert Clamp * 2 Hycar Gasket D381673NP * Air Filter for Air Injector * Plastic 2 End Cap A03170NP * 1/4 NPT Brass Barb EL Fitting A03173NP * D242738NP A03171NP * 1/4 NPT Brass Fitting A03173NP * 1/4" NPT Brass Barb Straight A03176NP * Cycle Timer A31837NP * Model V AC Humphrey Valve (4 Ports) M01059NP * 1/4 ID x 3/8 OD Clear Tubing (Not Shown) A31837NP * A03171NP * A03170NP * A03176NP * D382756NP D382772NP D242738NP D243721NP D381673NP D382756NP D382772NP Distributor Seal Valve Spring Diaphragm Body Seal Valve Seal Plastic Box with Mounting Plate PAGE 42 VER TO ORDER, PHONE

45 2" WASH DIVERTER The 2 Wash Diverter is a vacuum operated valve that is unaffected by moisture and chemical. The diverter has a 2 clamp fitting for system connections and adapts easily to PVC drain pipe or hose connections. Low maintenance. D498744NP 31700NP 2 Wash Diverter Complete with Valve & Accessory Kit A03173NP * D498744NP 31701NP A03170NP * A03171NP * A03173NP * 2 Clamp Diverter Valve Only Accessory Kit for Diverter Includes items below marked with * 1/4 NPT Brass Barb EL Fitting 1/4 NPT Brass Fitting 1/4" NPT Brass Barb Straight A31837NP * A03171NP * A03170NP * D382759NP A31837NP * M01059NP * Model V AC Humphrey Valve 1/4 ID x 3/8 OD Clear Tubing (Not Shown) D381673NP D382756NP D242738NP D242740NP D243721NP Distributor Seal O Ring - For OLD STYLE Valves Valve Spring D243721NP D242738NP D382772NP OR D242740NP D381673NP D382756NP Diaphragm Body Seal D382756NP D382759NP Adapter Seal D382772NP Valve Seal - For NEW STYLE Valves TO ORDER, PHONE VER PAGE 43

46 PAGE 44 VER TO ORDER, PHONE

47 RETURN TO: E-Zee Milking Equipment LLC 4904 Triangle Street, Suite A McFarland, WI Phone # Fax # Customer Service is our Goal In order that we may handle your returned merchandise more quickly and efficiently, please complete and return this form with ALL MERCHANDISE you are returning for credit. Failure to include this form with ALL returns will delay processing of credit until it is received. ALL RETURNS WILL BE SUBJECT TO A RESTOCKING CHARGE Date Customer Name Acct # Address City State Zip Telephone N = New U = Used Invoice # QTY Item # Description R = For Repair Cost Total Notes / Reason for Return Sub-Total Shipping % Restocking TOTAL Credit

48 E-Zee Milking Equipment NuPulse Division 4904 Triangle Street, Suite A McFarland, WI Phone: Toll Free: Fax: info@ezmilking.com Website: