A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Thorp/Germania ParaBone Key Features:

Size: px
Start display at page:

Download "A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Thorp/Germania ParaBone Key Features:"

Transcription

1 A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Thorp/Germania ParaBone Key Features: Conventional Exit - Automatic Indexing - 30" Cow-to-Cow Distance This parlor should milk from 80 to 100 cows per hour with one Milker Prepared For: Website Parlor # Proposal # # 11 Please Note: If the Quantity in the very left column is shown as that item is not included, i.e. no cost shown in the right hand column either Page 1 of 20

2 Qty Units Description Cost to Enduser 24 Stalls Continous Splash Shield - Stainless - 30" spacing $ 3,429 Page 2 of 20

3 4 Entrance and Exit Gates 2 1/2 x 2 1/2 x 11ga tubing $ 1,714 Automated Cow Traffic Controls 1 Group - (2) 3" x 10" Entrance Gate Cylinders - (2) 3" x 10" Exit Gate Cylinders - (4) 3" x 10" stainless Cylinders for Auto Indexing $ 4,286 Cow Traffic Controls at last stall on either side of parlor Stainless Cylinders operate Entrance & Exit Gate Page 3 of 20

4 24 Stalls Galvanized Blue Diamond Brisket Bars Rapid Exit! With Automatic Indexing $ 13,500 Page 4 of 20

5 4 Units Brisket Bar Support Posts $ 2,857 Page 5 of 20

6 24 Stalls Stainless Gutter, Stainless Curbing - both New! Galvanized Original Germania Grates - Remanufactured $ 8,777 Page 6 of 20

7 Original Germania/RoKa C No-Arm TakeOffs Remanufactured 24 Units Remanufactured but with high percentage of new parts All-Air controlled, All-stainless construction $ 20,400 RoKa Model RC No-Arm TakeOffs All-Air operated - No Electronics! Ultimately Reliability! Page 7 of 20

8 Germania Top Outlet Claw - Remanufactured 24 Units - Air Forks - 06 Shells - 60" Milk Hose - 108" Pulsation Hose - Short air tubes - Liners of your choice: Brand & Model $ 11,853 We developed this claw in 1978, the original Germania Top-Outlet Claw and have made it in its original form ever since (Picture on the right is not the correct CIP Cup Holder. These are optionally available, see last page) Page 8 of 20

9 24 Units Counterweighted Hose Supports $ 1,543 Pulsation System - New! 24 Stalls - 3" PVC Pulsation line with hoses, fittings & wiring harness - 3" PVC FreshAir line with fittings & hoses - (4) FreshAir Filters, three per side - (2) 3" PVC Cross-Overs in front & back - Pulsators iuncluded with Claw-Clusters $ 1, Unit Excalibur Pulsation Controller 3 Units Electrician provides 120 volt receptacle nearby - bid separately! $ 2,786 Page 9 of 20

10 80 ft 3" Lo-Line Incl. all brackets, nipples, clamps and gaskets Single loop, double slope line 2" CIP Lines Incl. all brackets, nipples, clamps and gaskets $ 5, ft From the CIP group in the milk house to the back of the parlor. $ 2,857 2" Discharge line - New! 60 ft from Receiver Group to Milk Tank. Includes special adapters at Tank and Safety Switch. $ 2,143 Page 10 of 20

11 0 Group 0 Group Traditional Receiver Group, with Partially New, Partially Remanufactured Components, incl. - 26" x 26" Receiver (2) 1 1/2 hp Milk Pumps, 2nd Pump is Stand-By Ball Check valve 3" x 3" Moisture Trap & U-Bend LL Probes and Controller Long Plug - Short Plug 1" Air Injector; Vacuum operated Drain $ - Conventional CIP System with Partially New, Partially Remanufactured Components, incl. DeLaval C-125 Pipe Line Washer 3/4" Hot and Cold, Air Operated Water Valves Open Wash Sink Divert Valve and Drain (3) Peristaltic Chemical Pumps $ - Page 11 of 20

12 Compressed Air System - New! 0 Group (1) 7.5 hp SpeedAir Piston Compressor $ - Electrician provides 430 Volt 3-phase to this group 10 hp Atlas Copco Srew Compressor & 80 gl storage tank for dry air Small Air Prep Group - APP-S - New! 1 Group Includes 1/2" copper lines & fittings to all stations of parlor $ 1,286 Page 12 of 20

13 15 Hp Vacuum System with Lobe-Style Pump - New! Gardner-Denver/Sutor-Built Pump 0 Units 0 ft Includes Frequency Controllers/Variable Speed Drive designed for 'No Interference' with Cow ID: shielded cable, none metallic enclosure, filtered input, etc., i.e. AfiMilk compatible $ - 6" PVC Header Lines with 3" fittings to Pulsation and 4" adaptors to the CIP / Receiver Group $ - Electrician provides 430 volt 3 phase to this Group 6" Header Line supplies CIP Receiver Group and Pulsation System Page 13 of 20

14 0 Group On-Farm Spare Parts Kit (Contains only new parts) Includes all essential parts for at least (1) year of operation (2) sensors, a retract cylinder, at least (1) of each air valves, an extra LLC, seal kit for the milk pump, PC Board for the PL Washer, several extra Pulsator, etc. $ - 2 x 5-ft Stainless Curb Extensions in Front 11 ft from Exit Gate to Breezeway Wall. Prevents manure from running into the pit; Includes concrete guard. $ Pcs Double Compartment Sink - New! $ - Accessories Group - New! 0 Group Hand Wash Sink, Filter Sock Holder with (1) box of Filters, SST paper towel holder, Soap Dispenser, Hose Rack for garden hose in Milk House, etc. $ - Pit Mats for 8 ft wide x 90 ft long pit floor 0 squ ft Page 14 of 20 Color of your choice - Blue, Green, Red or White $ -

15 0 Unit Stainless Pit Steps - 4 steps, 30" wide - New! $ - (2) 50ft 1" Wash-Down Hose for Cow Platforms 0 ft with solid Brass Firehose Nozzles $ - 0 ft (2) x 20 ft 1" clean-up hoses for the pit $ - 0 Units Traditional CIP Cup Holders $ - Page 15 of 20

16 0 Unit Stainless Breezeway Fence with (2) 3ft 'Side Wings' - Made from 2.5" x 2.5" square stainless tubing ft + 3 ft long, with - (2) Horizontals and - (4) 3 ft Verticals $ - 12-Stall Modular Platforms - New! 2 Units The structural bases of the Modules; Height of your concrete cow platform should be 34" - if you are comfortable with a 38" working height. To be discussed! $ 3,429 Page 16 of 20

17 We build our parlor modules on platforms, a frame work made form 2" x 4" steel tubing and usually 53" wide x 50.6 ft long for the typical dbl. 12. Normally, we slide the Modules into place on this steel frame work, pushed by a Skid Loader. Parlors up to dbl. 12 come on two trucks, all larger ones need four. Page 17 of 20

18 Summary Page Sub-Total Materials $ 88,594 Less: Dairy-Direct Discount of 26% $ (23,035) Cost of Materials after DDD $ 65,560 Pre-Installation Labor and Supplies provided by TechForAg at it's factory to convert the above materials into a Ready-To- Milk Modular Parlor (calculated at 15% of materials) $ 13,289 2 Trucks Freight $750/truck (In Wisconsin, slightly higher charges elsewhere) $ 1,500 On-Site Installation Labor, Supplies & Expenses $ 8,500 Grand Total Parlor with Freight & Installation $ 88,849 Per Stall $ 3,702 Page 18 of 20

19 Optionally Available 24 Units Fold-Up CIP Cup Holders Do not need Rubber Cups (To be discussed ) $ 6, Units 24 Stalls Air-Powered CIP Cup Holders Just push a button - Now you see them - then you don't $ 9,909 1" Kraiburn Rubber Mats (Made in Germany) - New! For the (2) Modular Cow Platforms Plus Freight and Installation $ 3,024 Page 19 of 20

20 Terms - I If production at TFA starts several months in the future 1) 15% down at signing of contract 2) 35% on start of production 3) 45% on delivery of parlor to the dairy 4) 5% on Start-up of Milking 4) $1,000 Rebate for prompt payment Terms - II If production at TFA starts more or less immdiately 1) 35% at signing of contract, plus 2) 25% six weeks later 2) 35% on delievery of parlor to the dairy 3) 5% on start-up of milking 4) $1,000 Rebate for prompt payment Page 20 of 20

i.e. no cost shown in the column on the right either If the Quantity in the very left column is shown as the item is not included

i.e. no cost shown in the column on the right either If the Quantity in the very left column is shown as the item is not included A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Thorp/Germania ParaBone Key Features: Conventional Exit - Automatic Indexing - 30" Cow-to-Cow Distance This parlor should milk from 80 to 100 cows

More information

A TechForAg 'Ready-To-Milk' Modular Parlor Model:

A TechForAg 'Ready-To-Milk' Modular Parlor Model: A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 8 Surge HerringBone - Conventional Exit - Remanufactured This parlor should milk from 60 to 75 cows per hour with one Milker Proposal for TechForAg

More information

(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers

(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 22 DeLaval/lue Diamond Parallel Key Features: Rapid Exit - Automatic Indexing - 28" Cow-to-Cow Distance This parlor should milk from 160 cows to 220

More information

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 Original Germania ProTime II HerringBone

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 Original Germania ProTime II HerringBone A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Original Germania ProTime II HerringBone Key Features: Rapid Exit - Automatic Indexing - All-Stainless - 45" Cow-to-Cow Distance Parlor will be

More information

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 16 Heritage ProTime I HerringBone - New!

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 16 Heritage ProTime I HerringBone - New! A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 16 Heritage ProTime I HerringBone - New! Key Features: Rapid Exit - Automatic Indexing - All Stainless Preliminary Proposal Prepared For: Website

More information

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 4 Original Germania ProTime II HerringBone

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 4 Original Germania ProTime II HerringBone A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 4 Original Germania ProTime II HerringBone Key Features: Conventional Exit Automatic Indexing AllStainless 45" CowtoCow Distance Parlor will be 53"

More information

TechForAg Modular Parlor

TechForAg Modular Parlor TechForAg Modular Parlor Model: Dbl. 20 Original Germania ProTime I HerringBone Remanufactured Includes various Groups of New! Equipment Key Features: Rapid Exit Automatic Indexing All Stainless Almost

More information

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 8 Original Germania ProTime I HerringBone Remanufactured Key Features : Conventional Exit Automatic Indexing All Stainless Preliminary Proposal Prepared

More information

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 12 Original DeLaval/Blue Diamond Parallel 27" Spacing Mostly New Front End Remanufactured Key Features: Rapid Exit Automatic Indexing S talls & TakeOffs

More information

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 9 Original Germania ProTime FastBack Remanufactured! Key Features: Rapid Exit Automatic Indexing All Stainless with AfiMilk 'Advanced' Milk Meter System

More information

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 9 Original Germania ProTime FastBack Remanufactured Key Features: Rapid Exit Automatic Indexing All Stainless Preliminary Proposal Prepared For: WebSite

More information

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 HERITAGE ProTime I HerringBone - Everything New!

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 HERITAGE ProTime I HerringBone - Everything New! A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 12 HERITAGE ProTime I HerringBone Everything New! Key Features: Rapid Exit Automatic Indexing All Stainless This color indicates equipment you can only

More information

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 8 Original Germania ProTime I HerringBone - Remanufactured

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 8 Original Germania ProTime I HerringBone - Remanufactured A TechForAg 'ReadyToMilk' Modular Parlor Model: Dbl. 8 Original Germania ProTime I HerringBone Remanufactured Key Features: Rapid Exit Automatic Indexing All Stainless Prepared For: Website #121 Proposal

More information

Germania, TechForAg & Heritage Parts

Germania, TechForAg & Heritage Parts Germania, TechForAg & Heritage Parts Contact Kim - Customer Service @ 715-360-8002 or Rolf @ 715-360-366 Rev 6-07-17 **Price Subject to Change** Parts for ProTime I, ProTime II and Parallel Parlors (For

More information

Germania, TechForAg & Heritage Parts

Germania, TechForAg & Heritage Parts Germania, TechForAg & Heritage Parts Contact Kim - Customer Service @ 715-360-8002 or Rolf @ 715-360-366 Rev 6-23-16 **Price Subject to Change** Parts for ProTime I, ProTime II and Parallel Parlors (For

More information

Germania, TechForAg & Heritage Parts. CIP Systems & Receiver Groups

Germania, TechForAg & Heritage Parts. CIP Systems & Receiver Groups Germania, TechForAg & Heritage Parts Contact Kim - Customer Service @ 715-360-8002 or Rolf @ 715-360-3660 Rev 05/02/2018 CIP Systems & Receiver Groups Receivers All Receivers priced per individual quote;

More information

Germania, TechForAg & Heritage Parts

Germania, TechForAg & Heritage Parts Germania, TechForAg & Heritage Parts Contact Kim - Customer Service @ 715-360-8002 or Rolf @ 715-360-3660 Rev 05/17/2018 Stainless Air Cylinders 1. TechForAg Cylinders are easy to repair - no special tools

More information

Parts for ProTime I and ProTime II Parlors

Parts for ProTime I and ProTime II Parlors Parts for ProTime I and ProTime II Parlors PT-I Stall Parts Weld-on Mtg. Tabs for TakeOffs, stainless X T-10222 $ 4.25 Square U-Bolt for 2 1/2" Tubing with nuts & flat washers X $ 8.33 2 1/2" x 2 1/2"

More information

Germania, TechForAg & Heritage Parts. Automatic TakeOff Parts

Germania, TechForAg & Heritage Parts. Automatic TakeOff Parts Germania, TechForAg & Heritage Parts Contact Kim - Customer Service @ 715-360-8002 or Rolf @ 715-360-3660 Rev 06/23/2016 **Prices are Subject to Change** Automatic TakeOff Parts Description New Rem. TFA

More information

C l 3774 EAST NEWPORT ROAD, GORDONVILLE, PA TOLL FREE: PHONE: FAX: CUSTOM PARLOR CATALOG

C l 3774 EAST NEWPORT ROAD, GORDONVILLE, PA TOLL FREE: PHONE: FAX: CUSTOM PARLOR CATALOG Service is Our r e m o Goa st u C l E-Zee Milking Equipment, LLC Partnering with you in the dairy industry 3774 EAST NEWPORT ROAD, GORDONVILLE, PA 17529 TOLL FREE: 888-880-3933 PHONE: 717-768-7560 FAX:

More information

TechForAg 1855-A W. Davenport Str.Rhinelander, WI Fax Kim Rolf

TechForAg 1855-A W. Davenport Str.Rhinelander, WI Fax Kim Rolf TechForAg 1855-A W. Davenport Str.Rhinelander, WI 54501 Fax 715-362-7595 Kim 715-360-8002 Rolf 715-360-3660 November 1, 2011 - Subject to change without notice Automatic TakeOff Parts (Except Air Valves)

More information

GEA Milfos iflow Rotary Parlour. engineering for a better world

GEA Milfos iflow Rotary Parlour. engineering for a better world GEA Milfos iflow Rotary Parlour engineering for a better world 2 GEA Milfos iflow Rotary Parlour About GEA Milfos GEA Milfos milking parlours and equipment are manufactured in New Zealand. Our comprehensive

More information

NUPULSE AND HOLDREN CATALOG

NUPULSE AND HOLDREN CATALOG E-Zee Product Disclaimer 2016 This catalog is a listing of NuPulse and Holdren Brothers items. NOTICE: Some items are copies of original products. In most cases they will be identified with the word replacement.

More information

INSTALLATION AND USER MANUAL

INSTALLATION AND USER MANUAL INSTALLATION AND USER MANUAL SDKIT-730 & SDKIT-734 100% Bolt-On 150 PSI Train Horn System for 2011-2015 F-250 & F-350 Super Duty P/N SDKIT-730 P/N SDKIT-734 Thank you for purchasing a Kleinn Air Horns

More information

Washer-Extractor Pocket Hardmount

Washer-Extractor Pocket Hardmount Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Models UW60P2 and UW60P3 Model UW60B2 PHM1411C_F232166 www.alliancelaundry.com Part No. F232166R15 November 2013 Table of Contents

More information

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW60P2 and UW60P3.

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers.   Models UW60P2 and UW60P3. Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Models UW60P2 and UW60P3 Model UW60B2 PHM1411C_F232166 www.alliancelaundry.com Part No. F232166R16 August 2017 Table of Contents

More information

E-Zee Product Disclaimer. Terms. Return Goods. Warranty Information. Ordering/Shipping/Pricing

E-Zee Product Disclaimer. Terms. Return Goods. Warranty Information. Ordering/Shipping/Pricing E-Zee Product Disclaimer This catalog is a listing of NuPulse and Holdren Brothers items. NOTICE: Some items are copies of original products. In most cases they will be identified with the word replacement.

More information

ATTACHMENT I BID SCHEDULE IFB NO , CHURCH FARMS EAST STORAGE TANK AND BOOSTER PUMP STATION

ATTACHMENT I BID SCHEDULE IFB NO , CHURCH FARMS EAST STORAGE TANK AND BOOSTER PUMP STATION ATTACHMENT I BID SCHEDULE IFB NO. 19-021, CHURCH FARMS EAST STORAGE TANK AND BOOSTER PUMP STATION Item No. Description Qty Unit Unit Cost Amount Pump Station Site Work 1 Site Demolition / Removals / Haul

More information

Washer-Extractor Cabinet Freestanding SF35, UF35, SF50, UF50, SF85, UF85

Washer-Extractor Cabinet Freestanding SF35, UF35, SF50, UF50, SF85, UF85 Washer-Extractor Cabinet Freestanding SF, UF, SF0, UF0, SF, UF Parts R022P Part No. F2009R April 2000 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location... 2 Model Identification...

More information

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW35P2 and UW35P3.

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers.   Models UW35P2 and UW35P3. Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Models UW35P2 and UW35P3 Model UW35B2 PHM1403C_F232165 www.alliancelaundry.com Part No. F232165R17 December 2014 Table of Contents

More information

COMPACT RACK TYPE DISHWASHER

COMPACT RACK TYPE DISHWASHER SPARE PARTS CATALOG ELECTROLUX PROFESSIONAL COMPACT RACK TYPE DISHWASHER 44 66 Models Affected: Electrolux Part Number Description 534034 ECRT66R208 534035 ECRT66L208 534036 ECRT66R240 534037 ECRT66L240

More information

Washer-Extractor Pocket Hardmount

Washer-Extractor Pocket Hardmount Washer-Extractor Pocket Hardmount UW125P4 Parts P005C_F8008201 www.alliancelaundry.com Part No. F8008201R10 June 2013 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location...

More information

Washer-Extractor Pocket Hardmount

Washer-Extractor Pocket Hardmount Washer-Extractor Pocket Hardmount UW35PV Parts U055C_F232150 www.alliancelaundry.com Part No. F232150R14 June 2013 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location... 2

More information

CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL

CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS C24GA6 C24GA10 ML-136056 ML-136057 PRIOR MLS COVERED IN THIS MANUAL C24GA6 C24GA10 ML-136021 ML-136022 For additional information on

More information

Fisher 1B and 1BR Constant Pressure Pump Governor Actuators

Fisher 1B and 1BR Constant Pressure Pump Governor Actuators Instruction Manual 1B Actuator Fisher 1B and 1BR Constant Pressure Pump Governor Actuators Figure 1. Fisher 1B Actuator on Direct Acting easy e Valve W2232 1 Introduction Scope of Manual This instruction

More information

215 Gallon Waste Oil Tank With Metering Pump Installation Instructions

215 Gallon Waste Oil Tank With Metering Pump Installation Instructions 215 Gallon Waste Oil Tank With Metering Pump Installation Instructions Lanair Products LLC 4109 Capital Circle Janesville, Wisconsin 53546 1-888-370-6531 www.lanair.com BEFORE YOU BEGIN INSTALLATION...

More information

SPARE PART LIST LW 300 E & LW 450 E

SPARE PART LIST LW 300 E & LW 450 E SPARE PART LIST LW 300 E & LW 450 E Nautico Maldives Pvt Ltd H. Oleander Hiththafinivaa Magu Male' Tel: + 960 31 52 53 Fax: + 960 32 44 96 Mobil: 00960 77 23 81 --------00960 77 88 79 E-mail: nautico@dhivehinet.net.mv

More information

STATE OF MINNESOTA PRICING Page % DISCOUNT

STATE OF MINNESOTA PRICING Page % DISCOUNT TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City,

More information

RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS SECTION VI RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS

RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS SECTION VI RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS SECTION VI SERVICE REQUIREMENTS This section discusses the requirements for establishing electric service to new residential subdivisions in Palo Alto. Subdivisions are normally constructed on dedicated

More information

QGD-20/25/30 & QGD-40/50

QGD-20/25/30 & QGD-40/50 QGD-0/5/0 & QGD-40/50 Direct Drive Rotary Screw Air Compressor Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this

More information

Slide In Vacuum Tank Price List 48 Standard Models

Slide In Vacuum Tank Price List 48 Standard Models Slide In Vacuum Tank Price List 48 Standard Models 300, 450, 600, 800, 995, 1200 & 1500 Gallon Capacities Rear Engine Side Engine Side Engine Transverse January 2018 SC Model Slide In Vacuum Tank Standard

More information

Access Riser Fits PRO370 and PRO380 Series

Access Riser Fits PRO370 and PRO380 Series Installation Manual 7171000D Access Riser Fits PRO370 and PRO380 Series Contents 1.) General Information 2.) Installation 3.) Optional 2 Installation Kits 4.) Typical Installation Diagram 5.) Junction

More information

Parts. Part B, Section 5. This section covers the following unit configurations Model 3500 Voltage 1. 2 Piston (E,) Issued 11/00

Parts. Part B, Section 5. This section covers the following unit configurations Model 3500 Voltage 1. 2 Piston (E,) Issued 11/00 Part B, Section 5 This section covers the following unit configurations Model 5 Voltage. Pump Piston (E,) Manifold -Port (A) Control UniScan Nordson Corporation Issued / B 5- Issued / 999 Nordson Corporation

More information

Washer-Extractor. Parts. Pocket Hardmount UW125PV. U055C_F230546

Washer-Extractor. Parts. Pocket Hardmount UW125PV.   U055C_F230546 Washer-Extractor Pocket Hardmount UW125PV Parts U055C_F230546 www.alliancelaundry.com Part No. F230546R21 August 2017 Table of Contents Title Page Parts Ordering Information... 2 Serial Plate Location...

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HPC PROOFER AND HRP RETARDER/PROOFER HPC100 ML-132156 HRP100 ML-132209 ML-132157 ML-132210 ML-132158 ML-132211 ML-132159 ML-132212 ML-132160 ML-132213 ML-132161 ML-132214 ML-132162

More information

IRON FRAME SETS

IRON FRAME SETS IRON FRAME SETS 127-134 127 IRON MOUNTING FRAMES Soap & Water Frame Sets 129-130 Urinals Frame Sets 131 W.C. Frame Sets 132-133 Artis G Cistern 134 Frame Set 128 Soap & Water frame sets Iron mounting frame

More information

Table of Contents. Item Page #

Table of Contents. Item Page # Product Catalog 1 Table of Contents Item Page # Septic Tanks 2 Septic System Accessories 3 Frost Free Stock Tank 4 Feed Bunks 5 Storm Shelter 6 Parking Blocks 7 Pads & Blocks 8 Tiles 9 Pump Pit 10 Steps

More information

Pool Skimmers and Skim Filters / Renegade Gunite In-Ground Skimmers

Pool Skimmers and Skim Filters / Renegade Gunite In-Ground Skimmers Pool Skimmers and Skim Filters / Renegade Gunite In-Ground Skimmers NSF Approved with Flow Rate of 75 GPM PVC sockets for better glue joints 2" socket is 2 1/2" spigot for more flow 1 1/2" socket is 2"

More information

Lightning Auto Loader

Lightning Auto Loader Lightning Auto Loader Automatic Stix Loader The most technologically advanced Auto Loader on the market today! Installation Note: Installation will be better achieved with a crew of at least three (3).

More information

Clean Water Made Easy

Clean Water Made Easy Clean Water Made Easy http://www.cleanwaterstore.com Pro-OX 2510 Manual Backwash Iron Filter Installation & Start-Up Guide Thank you for purchasing a Clean Water System! With proper installation and a

More information

AIR SHOWER & TUB REP

AIR SHOWER & TUB REP SHOWER & TUB REPAIR 02-2091 Price Pfister, Ball Joint, O-Ring, 403927 For Shower Head. 03-1251 403954 Fiberglass Shower Drain, Fits 2 Cast Iron, Steel, ABS, or PVC, Seals With Compression Gasket. 02-3027

More information

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Model UW125PV. Models UW125AV and UW125VV

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers.  Model UW125PV. Models UW125AV and UW125VV Washer-Extractor Pocket Hardmount Refer to Page 3 for Model Numbers Parts Model UW125PV Models UW125AV and UW125VV PHM1412C_F232184 www.alliancelaundry.com Part No. F232184R18 May 2018 Table of Contents

More information

Parts. Part B, Section 5. Model 3500 Voltage 1, 2. Manifold 6-Port (B or C) 2-Port (S or T) Issued 11/00 B5EN-05-[3-PARTS]-6

Parts. Part B, Section 5. Model 3500 Voltage 1, 2. Manifold 6-Port (B or C) 2-Port (S or T) Issued 11/00 B5EN-05-[3-PARTS]-6 Part B, Section 5 Model 500 Voltage, Pump Piston (E) Manifold -Port (B or C) -Port (S or T) Control MultiScan (M) 000Nordson Corporation -000 Issued /00 B 5-0 -000 Issued /00 000 Nordson Corporation B

More information

M O D E L S EST- FL PARTS MANUAL Rev 1.00A

M O D E L S EST- FL PARTS MANUAL Rev 1.00A M O D E L S EST- FL PARTS MANUAL Rev 1.00A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T S T R E E T GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com TABLE

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 Gas Convection Steamers C24GA6 ML-136056 C24GA10 ML-136057 C24GA6 ML-136021 C24GA10 ML-136022 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH

More information

Automatic Scrubber MODEL Ace 20C Parts List & Service Manual

Automatic Scrubber MODEL Ace 20C Parts List & Service Manual Automatic Scrubber MODEL Ace 20C Parts List & Service Manual The contents of this manual are based on the latest product information available at the time of publication. Triple S reserves the right to

More information

Washer-Extractor Pocket Hardmount

Washer-Extractor Pocket Hardmount Washer-Extractor Pocket Hardmount UW125PV Parts U055C_F230546 www.alliancelaundry.com Part No. F230546R17 January 2014 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location...

More information

CITY AND COUNTY OF DENVER DEPARTMENT OF PUBLIC WORKS Engineering Division PROJECT NO INCA STREET MULTI-USE PATH 38 TH AVE. TO 43 RD AVE.

CITY AND COUNTY OF DENVER DEPARTMENT OF PUBLIC WORKS Engineering Division PROJECT NO INCA STREET MULTI-USE PATH 38 TH AVE. TO 43 RD AVE. 201-00000 Clearing and Grubbing 1 LS 202-00010 Removal of Tree 9 EA 202-00019 Removal of Inlet 8 EA 202-00034 Removal of Pipe (6 Inch) 196 LF 202-00035 Removal of Pipe (18 Inch) 10 LF 202-00036 Removal

More information

2500/2700 Series Gas Convection Oven

2500/2700 Series Gas Convection Oven MARKET FORGE 2500/2700 Series Gas Convection Oven 2500/2700 Series Gas Convection Oven 2500 2700 2592 2792 Control Panel Assembly 1 99-4209 Control Panel Assembly Complete (Excluding Thermostat) 2 10-6307

More information

Repair Parts List DISHWASHER MODEL NUMBER JDB6510AWP. When requesting service or ordering parts, always provide the following information:

Repair Parts List DISHWASHER MODEL NUMBER JDB6510AWP. When requesting service or ordering parts, always provide the following information: Repair Parts List DISHWASHER MODEL NUMBER JDB6510AWP When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description

More information

MIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS

MIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the

More information

Porta John Systems, Inc.

Porta John Systems, Inc. Porta John Systems, Inc. Toll-Free Phone: 800-521-6310 Fax: 586-731-0670 International Phone: 001-586-739-4611 International Fax: 001-586-731-0670 E-Mail: info@toilets.com Web Page: http://www.toilets.com

More information

AN EXPLANATION OF CIRCUITS CARTER YH HORIZONTAL CLIMATIC CONTROL CARBURETER

AN EXPLANATION OF CIRCUITS CARTER YH HORIZONTAL CLIMATIC CONTROL CARBURETER AN EXPLANATION OF CIRCUITS CARTER YH HORIZONTAL CLIMATIC CONTROL CARBURETER The Carter Model YH carbureter may be compared with a Carter YF downdraft carbureter with the circuits rearranged to operate

More information

T E C H N I C A L S P E C I F I C A T I O N WORKSHOP LUBRICATION TRUCK

T E C H N I C A L S P E C I F I C A T I O N WORKSHOP LUBRICATION TRUCK 11350 T E C H N I C A L S P E C I F I C A T I O N WORKSHOP LUBRICATION TRUCK High Quality Product - MADE IN GERMANY Custom-made According to customer-specific requirements The Mobile Workshop can be used

More information

Greenoak Equipment Limited Manufacturers & Suppliers of Equipment and Spare Parts for Dairy Producers

Greenoak Equipment Limited Manufacturers & Suppliers of Equipment and Spare Parts for Dairy Producers Greenoak Equipment Limited Manufacturers & Suppliers of Equipment and Spare Parts for Dairy Producers Sales/Distribution/Purchasing Warehouse Chestnut Grove, Crewe, Cheshire WA1 4BD United Kingdom Web:

More information

PVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH

PVC Couplings. Brass Couplings BRASS COMPRESSION COUPLING 3 -LENGTH PVC COMPRESSION COUPLING BRASS COMPRESSION COUPLING 5 -LENGTH & FITT Brass Couplings BRASS COMPRESSION COUPL 3 -LENGTH 46331 3/8 1/2 12 120 5.80 46332 1/2 3/4 12 120 7.38 46333 3/4 1 6 72 10.52 46334 1 1 1/4 6 60 13.44 46335 1 1/4 1 1/2 4 48 18.00 46336 1 1/2 4 36

More information

THREE BRUSH ROLLOVER OR STATIONARY TRUCK WASH SYSTEM

THREE BRUSH ROLLOVER OR STATIONARY TRUCK WASH SYSTEM THREE BRUSH ROLLOVER OR STATIONARY TRUCK WASH SYSTEM SALES MANUAL The Finest Vehicle Wash Systems TABLE OF CONTENTS 1. RYKO Brochure 2. Features & Benefits 3. Description Basic Atlas, plus Options and

More information

Repair Parts List DISHWASHER MODEL NUMBER MDB9150AWS. When requesting service or ordering parts, always provide the following information:

Repair Parts List DISHWASHER MODEL NUMBER MDB9150AWS. When requesting service or ordering parts, always provide the following information: Repair Parts List DISHWASHER MODEL NUMBER MDB9150AWS When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description

More information

ED/ID/PD/MDV/MDH ED Door Assembly. 2 ID Door Assembly. 3 MDH/MDV Door Assembly. 4 PD Door Assembly. 5 Bezel Assembly.

ED/ID/PD/MDV/MDH ED Door Assembly. 2 ID Door Assembly. 3 MDH/MDV Door Assembly. 4 PD Door Assembly. 5 Bezel Assembly. ED/ID/PD/MDV/MDH Page # Sheet Title ED Door Assembly ID Door Assembly MDH/MDV Door Assembly PD Door Assembly Bezel Assembly Tank Assembly Tank Parts List 8 Upper Rack Assembly Lower Rack Assembly 0 Base

More information

INSTRUCTIONS AND PARTS LIST FOR Models 8-025, 8-050, 8-075, and Elec-Draulic II Presses

INSTRUCTIONS AND PARTS LIST FOR Models 8-025, 8-050, 8-075, and Elec-Draulic II Presses INSTRUCTIONS AND PARTS LIST FOR Models 8-025, 8-050, 8-075, and 8-150 Elec-Draulic II Presses SETTING UP THE PRESS FOR OPERATION For shipping convenience some of the parts are not assembled. Assemble these

More information

STATE OF MINNESOTA PRICING Page % DISCOUNT

STATE OF MINNESOTA PRICING Page % DISCOUNT STATE OF MINNESOTA PRICING Page % DISCOUNT Contract end Date March 1, 2018 TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact

More information

T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1.

T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG. Product Catalogue 3.1 / V1. T e c h n o l o g y f o r T h e W e l d e r s W o r l d. TIG Product Catalogue 3.1 / V1 www.binzel-abicor.com Content TIG Welding Torches TIg Welding Torches ABITIg grip air and liquid cooled Page 04

More information

PARTS LIST FOR VIPER VIPER

PARTS LIST FOR VIPER VIPER P-336 P-336 PARTS LIST FOR P-336-A P-336-A ILLUSTRATION OF SUB-ASSEMBLIES 6 3 1 5 2 4 P-336-A.1 P-336-A.1 For Codes: 10597 to 10635 Do Not use this Parts List for a machine if its code number is not listed.

More information

Winning Bid US Petroleum Equipment Walts Petroleum Northwest Petroleum Petro-Chemical Systems Kimberly Green Bay Wausau Fond Du Lac

Winning Bid US Petroleum Equipment Walts Petroleum Northwest Petroleum Petro-Chemical Systems Kimberly Green Bay Wausau Fond Du Lac Minimum Specifications/Questionnaire Bid Results for One (1) New Fuel Dispensing System-Larrabee Shop Winning Bid PERMIT FEES, FORMS, PLANS and NOTIFICATIONS Secure all necessary state and local permits

More information

The all new. by Kromer Co LLC. A totally new approach to Athletic Field Machines.

The all new. by Kromer Co LLC. A totally new approach to Athletic Field Machines. The all new by Kromer Co LLC A totally new approach to Athletic Field Machines. 1 Evolutionary and Revolutionary New concepts, improved capacity, increased reliability, lower cost of lifetime ownership.

More information

Switchgear Skid, C1192

Switchgear Skid, C1192 CUSTOM SOLUTIONS 15kV Modular Stairs stored on floor in front of battery bay Ground grid stored on front tongue of trailer Stairs deployed for unit access Storage box for fencing materials and other parts

More information

Deadline for advance rate is 15 days prior to show opening.

Deadline for advance rate is 15 days prior to show opening. ELECTRICAL SERVICE ORDER FORM QTY NON-24 HR DESCRIPTION ADVANCE RATE REGULAR RATE TOTAL 120V LIGHTING & UTILITY OUTLETS Up to 1000 watts $124.00 $185.00 Up to 2000 watts $154.00 $229.00 208V 1o MOTOR AND

More information

Washer-Extractor Pocket Hardmount

Washer-Extractor Pocket Hardmount WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT Washer-Extractor Pocket Hardmount Refer to Page 5 for Model Numbers Parts Models UW80PV and

More information

Roof and Wall Specialties and Accessories

Roof and Wall Specialties and Accessories CSI CODE REFERENCE All contents copyright 2014, The Construction Specifications Institute and Construction Specifications Canada. All rights reserved. MasterFormat Numbers & Titles 05 00 00 Metals 05 52

More information

MODEL CMA-44 PARTS MANUAL Rev 2.13

MODEL CMA-44 PARTS MANUAL Rev 2.13 MODEL CMA-44 PARTS MANUAL Rev 2.13 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com Table of Contents CMA-44 1. PARTS MANUAL... 4

More information

Washer-Extractor Pocket Hardmount

Washer-Extractor Pocket Hardmount WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT Washer-Extractor Pocket Hardmount Refer to Page 5 for Model Numbers Parts Models UW80PV and

More information

Surface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features

Surface drilling rig. Explorac R50 on truck. Atlas Copco Exploration Products. Features Atlas Copco Exploration Products Surface drilling rig Explorac R50 on truck It is a robust and reliable drill unit, making it ideal for remote areas. It is designed to perform an outstanding base platform

More information

Small vents make a big difference

Small vents make a big difference Small vents make a big difference Mouthpiece Vented Triangular Liners NEW Revolutionary milking solution Introducing the air into the system at the mouthpiece of the liner reduces the damaging effects

More information

Shades Technics. 2050RS Toilet Cubicle. Manual

Shades Technics. 2050RS Toilet Cubicle. Manual Shades Technics 2050RS Toilet Cubicle Manual CONTENTS CUBICLE OPERATING INSTRUCTIONS CLEANING & HYGENE CUBICLE MAINTENANCE WARRANTY CLAIMS SPARE PARTS CATALOGUE Door Sink Vanity Vanity Door Bin Lid Upper

More information

ILR 20,25,30 PARTS MANUAL. ECN-M0XXX Rev. 2.2, Date Part #

ILR 20,25,30 PARTS MANUAL. ECN-M0XXX Rev. 2.2, Date Part # ILR 0,,0 PARTS MANUAL ECN-M0XXX Rev.., Date 04--04 Part #90-04-000 99 Piuma Ave., Cerritos, CA 900 Tel ()-4-44 Fax (6)-94- Whitehead Road, Trenton, NJ 069 Tel (609)--400 Fax (609)--40 Visit our website

More information

Parts List Book CPE CPVS

Parts List Book CPE CPVS Code 2205 6010 04 Edition 08/2013 Oil-injected Rotary Screw Compressors Parts List Book CPE125-1 CPVS125-1 People.Passion.Performance. CONTENTS WARRANTY AND LIABILITY LIMITATION... 2 ORDERING SPARE PARTS...

More information

HILLS MATERIALS COMPANY UNIT COST TOTAL COST UNIT COST TOTAL COST UNIT COST $294, $294, $74, $74, $35, $35,000.

HILLS MATERIALS COMPANY UNIT COST TOTAL COST UNIT COST TOTAL COST UNIT COST $294, $294, $74, $74, $35, $35,000. PROJECT NAME: Anamosa Street Reconstruction - Midway Street to Miiwuakee Street PROJECT NUMBER: PROJECT NO. 07-1473 / CIP NO. 50559 LET DATE: April 11, 2017 LOW BID AMOUNT: $3,941,397.20 ENGINEER'S ESTIMATE

More information

Partnering with you in the dairy industry

Partnering with you in the dairy industry Customer Service e is Our Goal Partnering with you in the dairy industry 2016 TAKEOFF T CATALOG ~NEW ~ USED ~ REBUILT ~ PARTS 3910 E. NEWPORT ROAD GORDONVILLE, PA 17529 PHONE: 800-768-6166 FAX: 717-768-7586

More information

A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less.

A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. SECTION 221513 - COMPRESSED-AIR PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes piping and related specialties for general-service compressed-air systems operating at 150 psig or less. 1.2

More information

Washer-Extractor Cabinet Freestanding

Washer-Extractor Cabinet Freestanding Washer-Extractor Cabinet Freestanding Refer to Page 3 for Model Numbers Parts CFD8C_9001008 www.comlaundry.com Part No. 9001008R15 December 2011 Table of Contents Title Page Parts Ordering Information...

More information

FREEDOM FILL AUXILIARY SYSTEM Gauge & Switch Console

FREEDOM FILL AUXILIARY SYSTEM Gauge & Switch Console 2018 Aluminum Tank & Tank Accessories, Inc. 2702-B N. Nichols, Fort Worth, TX 76106 800-773-3047 * 817-378-8455 www.attatank.com attatank@gmail.com FREEDOM FILL AUXILIARY SYSTEM Gauge & Switch Console

More information

SPARE PARTS LIST. POWER CUTTERS K960 Chain,

SPARE PARTS LIST. POWER CUTTERS K960 Chain, SPARE PARTS LIST POWER CUTTERS K960 Chain, 2008-03 AIR FILTER K960 Chain, 2008-03 AIR FILTER K960 Chain, 2008-03 Ref Part No Description Remark QTY KIT 1 503 21 53-45 SCREW ITXSCM 2 2 544 87 46-01 LABEL

More information

40Z-Meter. Truck-Mounted Concrete Boom Pump

40Z-Meter. Truck-Mounted Concrete Boom Pump Truck-Mounted Concrete Boom Pump 1 128' 3" (39.09m) vertical reach Up to 210 yd 3 /hr (160m 3 /hr) maximum output Versatile 4-section Multi-Z boom design 4.6" (117mm) twin-wall delivery line 3-axle chassis

More information

Project Book Worksheet for Cost Estimation

Project Book Worksheet for Cost Estimation 001.01 MOBILIZATION LS $34,716.18 007 3/17/2039 001.02 INCIDENTAL LS $23,929.43 019 3/17/2039 001.03 CONSTRUCTION STAKING LS $10,504.39 201 5/9/2013 001.04 REESTABLISH PROPERTY CORNERS EA $496.08 201 5/9/2013

More information

Service Parts. John Deere 6068HFG08. Engine. Engine Models: Generator Models: 125/150REOZJ4 145/175REOZT4 TP /15

Service Parts. John Deere 6068HFG08. Engine. Engine Models: Generator Models: 125/150REOZJ4 145/175REOZT4 TP /15 Service s Engine Engine Models: John Deere 6068HFG08 Generator Models: 125/150REOZJ4 145/175REOZT4 Table of Contents Subject Page Subject Page Introduction... 3 Group 42: DEF Line... 27 Numbering System

More information

P673L For Models: M673L and NL673L PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators

P673L For Models: M673L and NL673L PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators P673L For Models: M673L and NL673L PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are

More information

SUBMITTAL COVER SHEET

SUBMITTAL COVER SHEET SUBMITTAL COVER SHEET PROJECT NAME LOCATION ARCHITECT ENGINEER CONTRACTOR SUBMITTED BY DATE UNIT SUMMARY Quantity Unit Designation Model No. Total Cooling Sensible Cooling Air Ent. Evaporator Air Lvg.

More information

DEMA 258BD-200C and 258BT-200C DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET

DEMA 258BD-200C and 258BT-200C DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET I-736 Pg. 1 of 10 Summary The 258BD-200C Drain Master is designed to feed chemicals into drains and grease traps to break up grease, detergent buildup and eliminate odors. The 258BT-200C Trash Master is

More information

NOTE: All dimensions shown are rounded up to the nearest inch to get even dimensions. TM.400NMTVP doc Page 1 of 5

NOTE: All dimensions shown are rounded up to the nearest inch to get even dimensions. TM.400NMTVP doc Page 1 of 5 NOTE: All dimensions shown are rounded up to the nearest inch to get even dimensions. TM.400NMTVP-2.04122017.doc4122017 Page 1 of 5 CAPACITY Dry Weight: 400-450 Lbs [181-204 kg] TOP-SIDE LOADER WASHER/EXTRACTOR

More information

VCSF136DSS01 : CABINET [1/13]

VCSF136DSS01 : CABINET [1/13] VCSFDSS0 : 00 - CABINET [/] Page of VCSFDSS0 : 00 - CABINET [/] Page of Ref # Part Number Qty. Description 5 7 8 9 0 5 7 8 9 0 5 7 8 9 0 NI NON-SERVICEABLE 059-000 057-000 07-000 0575-000 08-000 08-000

More information