Materiali impiegati. 1 CORPO VALVOLA: Alluminio. 2 SPOLA: Alluminio 3 GUARNIZIONE SPOLA: NBR. 4 MOLLA: Acciaio. 6 PISTONE: Tecnopolimero
|
|
|
- Corey Simon
- 5 years ago
- Views:
Transcription
1 Caratteristiche Genarali Funzionamento: a spola Tipo valvola: interfaccia ISO 5599/1 Connessione: su sottobase ISO Materiale corpo: alluminio Uso Singolo: Si Uso in batteria: Si Funzioni disponibili: 5/2; 5/3 Note: connettori e bobine forniti separatamente General Features Construction: spool type Valve type: ISO 5599/1 interface Ports: on manifold Body material: alluminium Single use: Yes Use on battery: Yes Available functions: 5/2; 5/3 Note: connectors and coils are supplied separately Guida alle referenze Guide to references EV ISO1 5 SL ML OO M Prodotto Product EV = Elettrovalvola Materiale Material M = Metallo Metal Tipo Type ISO1 = ISO 5599/1 Funzione Function 5 = 5/2 6 = 5/3 Opzione Option CC = Centri chiusi Closed centres CA = Centri aperti Opened centres CP = Centri di pressione Pressure centre OO = 5/2 Azionamento Operation SL = Elettropneumatico Solenoid Ritorno Return ML = Molla Sping BS = Bistabile Bistable RC = Ritorno al centro Return to centre 1 CORPO VALVOLA: Alluminio 2 SPOLA: Alluminio 3 GUARNIZIONE SPOLA: NBR 4 MOLLA: Acciaio 5 FONDELLO: Tecnopolimero 6 PISTONE: Tecnopolimero 7 OPERATORE: Alluminio 1 VALVE BODY: Aluminium 2 SPOOL: Aluminium 3 SPOOL GASKET: NBR 4 SPRING: Steel 5 END COVER: Technopolymer 6 PISTON: Technopolymer 7 HOUSING: Aluminium generali - General technical data COSTRUZIONE - CONSTRUCTION a spola - spool valve FLUIDO - FLUID aria filtrata con o senza lubrificazione - filtered air with or without lubrication FISSAGGIO - INSTALLATION singolo e battetia ISO 5599/1 - single and battery ISO 5599/1 CONNESSIONI - CONNECTIONS 1/4" su sottobase - 1/4 in manifold RANGE DI TEMPERATURA - TEMPERATURE RANGE -5 / +50 C (23 / 122 F) PORTATA DI RIFERIMENTO - REFERENCE FLOW RATE P1= 6 bar; P= 1 bar; 1.300i/min 2. 99
2 Pressione di lavoro: 2 7 Bar (0,20 0,70 MPa) Working pressure: 2 7 Bar (0,20 0,70 MPa) Valvole elettro-pneumatiche 5/2 monostabile 5/2 Single solenoid valves EV ISO1 5 SL PM OO M Pressione di lavoro: 2 7 Bar (0,20 0,70 MPa) Working pressure: 2 7 Bar (0,20 0,70 MPa) Valvole elettro-pneumatiche 5/2 bistabili 5/2 Double solenoid valves EV ISO1 5 SL BS OO M
3 Pressione di lavoro: 3 7 Bar (0,30 0,70 MPa) Working pressure: 3 7 Bar (0,30 0,70 MPa) Valvole elettro-pneumatiche 5/3 5/ EV ISO1 6 SL RC CC M EV ISO1 6 SL RC CA M EV ISO1 6 SL RC CP M ACCESSORI - ACCESSORIES Bobina 22mm 22mm Coil 1355A00003 GUARNIZIONE - SEAL 130 A BOBINA (COIL) DC12V A BOBINA (COIL) DC24V A BOBINA (COIL) AC24V 50/60HZ A BOBINA (COIL) AC110V 50/60HZ A BOBINA (COIL) AC220V 50/60HZ Bobina 22mm con certificazione UL 22mm Coil with UL certification A BOBINA UL (COIL) DC24V (DC12V) A BOBINA UL (COIL) AC24V (DC12V) A BOBINA UL (COIL) AC110V A BOBINA UL (COIL) AC220V Conettore Connectors A CONNECTOR SP 22mm
4 Accessori Accessories 1355A00001 STB ISO singola uscite laterali posteriori single ISO 1 STB side/rear ports Sottobase singola Single sub-base 1355A00002 STB ISO singola modulare uscite posteriori Modular ISO 1 STB rear ports Sottobase modulare Modular sub-base
5 1355A00005 STB ISO singola uscite frontali single ISO 1 manifold front ports Line Accessori Accessories Sottobase singola Single sub-base 1355A00006 STB ISO singola modulare uscite frontali Modular ISO 1 manifold front ports Sottobase modulare Modular sub-base
6 Line 130 NAMUR Caratteristiche Genarali Funzionamento: a spola Tipo valvola: interfaccia NAMUR Connessione: 1/4 Materiale corpo: alluminio Uso Singolo: Si Uso modulare: No Funzioni disponibili: 5/2 monostabile/bistabile Note: connettori e bobine forniti separatamente General Features Construction: spool type Valve type: NAMUR interface Ports: 1/4 Body material: alluminium Single use: Yes Modular Manifold use: No Available functions: 5/2 monostable/bistable Note: connectors and coils are supplied separately Guida alle referenze Guide to references EV NM 5 SL ML Prodotto Product EV = Elettrovalvola Tipo Type NM = NAMUR Funzione Function 5 = 5/2 Azionamento Operation SL = Elettropneumatico Solenoid OO M Materiale Material M = Metallo Metal Opzione Option OO = 5/2 Ritorno Return ML = Molla Sping BS = Bistabile Bistable CORPO VALVOLA: Alluminio SPOLA: Alluminio GUARNIZIONE SPOLA: NBR MOLLA: Acciaio FONDELLO: Tecnopolimero PISTONE: Tecnopolimero OPERATORE: Alluminio MANUALE: Tecnopolimero BOSSOLA: Tecnopolimero VALVE BODY: Aluminium SPOOL: Aluminium SPOOL GASKET: NBR SPRING: Steel END COVER: Technopolymer PISTON: Technopolymer HOUSING: Aluminium MANUAL OVERRIDE: Technopolymer BUSH: Technopolymer generali - General technical data COSTRUZIONE - CONSTRUCTION a spola - spool valve FLUIDO - FLUID aria filtrata con o senza lubrificazione - filtered air with or without lubrication FISSAGGIO - INSTALLATION su attuatore interfaccia Namur - on actuator Namur interface CONNESSIONI - CONNECTIONS 1/4" RANGE DI TEMPERATURA - TEMPERATURE RANGE -5 / +50 C (23 / 122 F) PORTATA DI RIFERIMENTO - REFERENCE FLOW RATE P1= 6 bar; P= 1 bar; lt/min
7 130 NAMUR Pressione di esercizio: 2 8 Bar (0,20 0,80 MPa) Working pressure: 2 8 Bar (0,20 0,80 MPa) Valvole elettro-pneumatico 5/2 monostabile 5/2 Single solenoid valves EV NM 5 SL ML OO M Pressione di esercizio: 2 8 Bar (0,20 0,80 MPa) Working pressure: 2 8 Bar (0,20 0,80 MPa) Valvole elettro-pneumatico 5/2 bistabile 5/2 Double solenoid valves EV NM 5 SL BS OO M
valvole VDMA 18 mm azionamento pneumatico
valvole VDMA 18 mm azionamento pneumatico pneumatically piloted valves - VDMA 18 mm Valvole a spola 5/-5/3 5/-5/3 spool valves A norma VDMA 4563 - taglia 0 (18 mm) Compliant to norm VDMA 4563 - size 0
valvole ISO 5599/1 taglia 1
valvole ISO 5599/1 taglia 1 ISO 5599/1 valves - size 1 Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale
valvole ad azionamento pneumatico
Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,
valvole 16 mm ad azionamento pneumatico
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
MICROVALVOLE IN TECNOPOLIMERO TECHNOPOLYMER MICROVALVES
.0.00 serie 00 MV M5-AU4 00 MV M5-AU4 line Prodotto Product MV = Microvalvola Microvalve Taglia Body width 5 = 5 mm Guida alle referenze Guide to references Connessione Connection AU4= Raccordi automatici
110 1/8 - ø4. Elettropiloti Solenoid valves. Aria filtrata con o senza lubrificazione - Filtered air with or without lubrication C ( F)
Line 1 1/8 - ø4 Elettropiloti Solenoid valves Dati tecnici - Technical data Fluido - Fluid Temperatura d esercizio - Working temperature Pressione massima d esercizio - Max. working pressure Lubrificazione
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
VALVOLE AD AZIONAMENTO ELETTRICO E PNEUMATICO SERIE VB SOLENOID AND PNEUMATIC ACTUATED VALVES VB SERIES
Airwork presenta la nuova serie di valvole VB concepite per rispondere alle sempre maggiori esigenze di compattezza delle dimensioni, senza però rinunciare alla solidità e robustezza. Ecco allora la risposta,
R 159. Duty cycle. ED 100%; ED 60%(90 C) Direzione del fluido Unidirezionale Flow direction Unidirectional Diametro di passaggio DN 8 mm.
Elettrovalvola Serie R R 159 Rpe s.r.l. Via S. Ambrogio, 3 22070 Carbonate (CO) Italy Tel. +39 0331832515 Fax +39 0331832501 www.rpesrl.it CLASSIFICAZIONE CLASSIFICATION Tipologia Semplice Type Single
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
Catalogo Generale General Catalogue
General Catalogue - Price List 2017 Layout & Graphic Design: STUDIO'80 (BO) - Italy Printed by M.G. Tipografia Litografia (Funo) - Italy Catalogo Generale - Listino Prezzi Catalogo Generale General Catalogue
121 1/8 NPT. Line. Manual and mechanical valves size 0,86 in
121 1/8 NPT Manual and mechanical valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
Sez./Section B Valvole di sequenza Sequence Valves
Sez./Section B Valvole di sequenza Sequence Valves Valvole di sequenza ad azione diretta Queste valvole sono impiegate quando il funzionamento di un attuatore deve avvenire in modo automatico e sequenziale
Sez./Section B Valvole di sequenza Sequence Valves
Sez./Section B Valvole di sequenza Sequence Valves Valvole di sequenza ad azione diretta Queste valvole sono impiegate quando il funzionamento di un attuatore deve avvenire in modo automatico e sequenziale
5/2-5/3 LIGHT VALVES Series AE (SUBBASE) 5/2-5/3 ISO 5599/1 VALVES Series BE (SUBBASE)
/-/ LIGHT VLVS Series (SUBBS) /-/ ISO / VLVS Series B (SUBBS) Light series valves for ISO / sub-base mounting Light series: technopolymer valve body with metall cover Interchangeability: ISO / sub-base
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
SUMMARY PROCESS VALVES MULTIPLE FLUIDS
SUMMARY PROCESS VALVES MULTIPLE FLUIDS P MULTIPLE-FLUID PROCESS VALVES.2 P SOLENOID VALVES, SERIES EV-FLUID.4 P SOLENOID VALVES, SERIES EV-FLUID, DIRECT ACTING.5 P SOLENOID VALVES, SERIES EV-FLUID, SERVO-ASSISTED
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
Funzione, regolazione sicurezza. Function, regulation and safe
Funzione, regolazione e e sicurezza n an sa Function, regulation and safe Indice / Index / Function, regulation and safe / Flow regulators METAL series / Flow regulators EASY series / Flow regulators POLYMER
2 START PERKINS POMPE GRUPPO PUMPS GROUP ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP PRKS - G. Pompe ad ingranaggi Gear pumps
POMPE GRUPPO PUMPS GROUP Pompe ad ingranaggi 2 START A= ESEMPIO DI ORDINAZIONE IN CODICE /EXAMPLE OF ORDERING CODE 2SP A 14 D (H) - 1 G (VT) CILINDRATA cm³/giro DISPLACEMENT c m ³ /rev. Flangia e coperchio
VALVOLE A SFERA A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads)
A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads) Caratteristiche tecniche Technical features Corpo e sfera : Ottone CW617N UNI EN 12165 Asta
PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
Valvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
Modello: Tolleranza: Classe 1, sec. DIN IEC 584. Terminale: Esempio
Termocoppia ad isolamento minerale con testa a squadra leggera T-220 Termocoppia ad isolamento minerale con testa a squadra Din B sec DIN 43729 Materiale isolante: Guaina inox: MgO super compresso Acciaio
SOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.
With pleasure we introduce on the Italian market SYSTEM 8, produced NASS MAGNET of solenoid valve that thanks to their modularity give the possibility of a wide range of easy solutions. The solenoid valve
210FR. Aluminum medium pressure filter regulator, suitable for compressed air FEATURES. Filter-Regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
Siata 3V-50 3V-50 3V-50 0,32 0,5 0,8 1,2 1,6 2. D "P" (bar) Servizio Deviazione
Siata V-50 V-50 PRESSIONE - Pressione di esercizio: da a 6 bar PORTATA (vedi diagramma sotto) - Portata di servizio (Delta P = bar):,5 mc/h - Portata di servizio (Delta P = bar): 69 mc/h - Portata in deviazione
SMT8B pump series. Applications / applicazioni. Flow media/fluidi
SMT8B pump series Settima designs and manufactures hydraulic 3 screw pumps and helical rotors pumps. Settima screw pumps, coupled together with external or immersed motors, run quietly and with no pulsations,
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
Valvole di regolazione. Control valves
pneumatiche Pneumatic control valves Serie VR2200 / 2200 Series DESCRIZIONE Valvola di regolazione per industrie alimentari, farmaceutiche, chimiche, cosmetiche. Valvola a squadra con attuatore pneumatico
Serbatoi ed accessori per centraline oleodinamiche Oil tanks and accessories for hydraulic power units. Accessori - Accessories 07
Serbatoi ed accessori per centraline oleodinamiche Oil tanks and accessories for hydraulic power units Accessori - Accessories 07 CP3GC - CP6GC Serbatoi completi Complete oil tanks 3-6 dm 3 Costruiti in
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
POMPE A PISTONI AD ASSE INCLINATO
POMPE A PISTONI AD ASSE INCLINATO BENT AXIS PISTON PUMPS Fluido idraulico Fluid Viscosità cinematica consigliata Kinematic viscosity suggested Minerale o sintetico compatibile con guarnizioni: Mineral
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
FOTO PRODOTTO. Cementifici, HVAC, Impianti a Biomassa, Power Plants, Pulp and Paper Industry, Chemical Industry,
FOTO PRODOTTO Applications Applicazioni - Gas Fluids - Fluidi gassosi - Cogeneration and Incineration Plants, Steel Industry, - Cogenerazione ed Impianti di Incenerimento, Industria Siderurgica, Concrete
YFC... II 2 GD Ex d IIC T6 Ex td A21 IP 66/67 T85 C. IECEx SIR /9/CE EN EN EN EN
Finecorsa ESECUZIONE ANTIEFLAGRANTE II 2 G Ex d IIC T6 Ex t A21 IP 66/67 T85 C Limit switches EX COE CERTIFICAZIONE SIRA 07 ATEX 1316 CERTIFICATE IECEx SIR 07.0104 IRETTIVA 94/9/CE IRECTIVE NORME INSTALLAZIONE
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
valvole unidirezionali one-way valves
La FOR rafforza la propria gamma prodotti con l introduzione delle valvole unidirezionali. Tali valvole permettono il libero passaggio in un solo senso (quello indicato dalla freccia) e lo impediscono
Fluido idraulico Fluid. Viscosità cinematica consigliata Kinematic viscosity suggested
POMPE AD INGRANAGGI FISSAGGIO 3 FORI-UNI 3 HOLES-UNI HYDRAULIC CODICE FAMIGLIA FAMILY CODE 05-0 NPH UNI Data: Lunedì 3 giugno 20 Codice fascicolo:997-400-050 Fluido idraulico Fluid Viscosità cinematica
PVV3 VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES. Caratteristiche tecniche. Technical data. Technische Merkmale
VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES 122 PVV3 Caratteristiche tecniche I Nominal size Max working pressure Rated fl o w Max fl ow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min
CILINDRI PNEUMATICI ISO 6431 PNEUMATIC CYLINDERS
ILII PUTII ISO 6431 PUTI YLIS ISO 15552 SIS X lesaggi 32-40-50-63-80-100-125 Light alloy end caps painted gray. lean profile aluminium body gauged inside and outside. isponibile con certificazione TX vailable
IEC Automatic Drain Eccellente stabilità e ripetibilità. Compressed air, inert gases, sweet and sour gases Port thread / Connessioni
AISI316 1/4 NPT Instrument Filter Regulator FR serie Filtro Regolatore da 1/4 NPT in AISI316 serie FR Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable
FILTRAZIONE DI PROCESSO PROCESS FILTRATION
FILTRAZIONE DI PROCESSO PROCESS FILTRATION Serie IFD-R4 Filtri duplex in linea Inline duplex filter CORPO FILTRO Descrizione: Portata massima: Pressione max di esercizio: Connessioni: Valvola by-pass:
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
Sez. R VILLA VALVOLE. TIPOLOGIE MODELS Pag. 2. Giunti AXILOCK AXILOCK type Pag. 3. Giunti AXIFLEX AXIFLEX type Pag. 5
VILLA VALVOLE Giunti di congiunzione couplings GIUNTI TEEKAY TEEKAY COUPLINGS TIPOLOGIE MODELS Pag. Giunti AXILOCK AXILOCK type Pag. 3 Giunti AXILOCK Fire proof AXILOCK Fire proof Pag. 4 Giunti AXIFLEX
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Avvolgitubo Hose reel 8400 SCOPRI IL NUOVO AVVOLGITUBO INOX DISCOVER THE NEW STAINLESS STEEL HOSE REEL
Avvolgitubo 8400 Hose reel 8400 SCOPRI IL NUOVO AVVOLGITUBO INOX DISCOVER THE NEW STAINLESS STEEL HOSE REEL SERIE 8400 ANCORA PIÙ FLUIDI SERIE 8400 EVEN MORE FLUID RULLI GUIDATUBO autolubrificati Auto-lubricated
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
UNIVERSAL srl Via Molino Franzini 13 - Loc. Trevozzo Alta Val Tidone - Piacenza Italy TEL FAX
SAFETY VALVES / VALVOLE DI SICUREZZA UNIVERSAL srl Via Molino Franzini 13 - Loc. Trevozzo 29031 Alta Val Tidone - Piacenza Italy TEL. 0523997677 FAX 0523997354 sales@universalvalves.it - www.universalvalves.it
FILTRAZIONE IDRAULICA HYDRAULIC FILTRATION
FILTRAZIONE IDRAULICA HYDRAULIC FILTRATION Serie FD-1 Filtri in linea per le alte pressioni In linea high pressure filters CORPO FILTRO Caratteristiche tecniche Descrizione: Filtri di linea per alte pressioni
Aluminum Alloy 1/4-3/8-1/2 NPT Filter F serie Filtro da 1/4-3/8-1/2 NPT in lega di alluminio serie F
Aluminum Alloy 1/4-3/8-1/2 NPT Filter F serie Filtro da 1/4-3/8-1/2 NPT in lega di alluminio serie F Suitable to automation equipment, to onshore, offshore, pharmaceutical, medical and food applications
SISTEMI MECCANICI DI FISSAGGIO MECHANICAL FASTENING DEVICES
SISTEMI MECCANICI DI FISSAGGIO MECHANICAL FASTENING DEVICES L ampia gamma di maniglie, disponibili in plastica, zama, acciaio zincato ed acciaio inossidabile, permette di coprire un vasto campo applicativo
UNIVERSAL srl Via Molino Franzini 13 - Loc. Trevozzo Alta Valtidone - Piacenza Italy TEL FAX
SAFETY VALVES / VALVOLE DI SICUREZZA UNIVERSAL srl Via Molino Franzini 13 - Loc. Trevozzo 29010 Alta Valtidone - Piacenza Italy TEL. 0523997677 FAX 0523997354 sales@universalvalves.it - www.universalvalves.it
Sez. R VILLA VALVOLE. TIPOLOGIE MODELS Pag. 2. Giunti AXILOCK AXILOCK type Pag. 3. Giunti AXIFLEX AXIFLEX type Pag. 5
Giunti di congiunzione Pipe couplings GIUNTI TEEKAY TEEKAY COUPLINGS TIPOLOGIE MODELS Pag. 2 Giunti AXILOCK AXILOCK type Pag. 3 Giunti AXILOCK Fire proof AXILOCK Fire proof Pag. 4 Giunti AXIFLEX AXIFLEX
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
ACCESSORI ACCESSORIES
ACCESSORI ACCESSORIES A art. 556 ACCESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 C attacchi M F - - 1/2 - tipo C/FLANGIA - tipo C/FLANGIA E PREMISTOPPA
Controllers. Controllers Range. Description Descrizione/ Descripción. Page Pagine/ Página. Multizone Temperature Controller. Page Pagine/ Página
Controllers Range Multizone Temperature Controller Centraline di controllo della temperatura Unidad de control de temperatura multizonal Page Pagine/ Página 88 Valve Gate Sequence Controller Centraline
GROPPALLI. Accessori per Stufe a Pellet Flue Systems for Pellet Stoves
GROPPALLI Accessori per Stufe a Pellet Flue Systems for Pellet Stoves Numero commessa Commission number 001-15-CAB Emesso Issued 19/02/2015 QONCERT S.r.l. Organismo di Valutazione della Conformità QONCERT
Valvole rotative DT_ - Rotary valves DT_
Valvole rotative DT_ - Rotary valves DT_ A passaggio verticale bar - Drop-thru bar Minime perdite di trafilamento Minimum gas leakage Costruzione robusta Heavy duty construction Entrata angolata Sheared
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
ACCESSORI POMPE E MOTORI PUMPS AND MOTORS ACCESSORIES
SUPPORTS GROUP SUPPORTS GROUP SUPPORTS GROUP RACCORDI CONNECTORS 1 2 3 MANICOTTI DI TRASCINAMENTO MALES COUPLING Pag. Page D-2 D-3 D-5 D-6 D-8 D-1 -0.060 17.5 M12X1.5-0.060 M6 0-0.011 SUPPORTS GROUP 1
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
Section B RFS SOLENOID VALVES, PNEUMATIC VALVES AND COMPONENTS
Section B RFS SOLENOID VALVES, PNEUMATIC VALVES AND COMPONENTS SOLENOID VALVES 5 port - 1/8" port size 4V100 SERIES - 06 ( port sizes 1/8" ) - technical features - MODEL 4V110-06 4V10-06 4V130C-06 4V130E-06
YFC... II 2 GD Ex d IIC T6 Ex td A21 IP 66/67 T85 C. IECEx SIR /9/CE EN EN EN EN
Finecorsa ESECUZIONE ANTIEFLAGRANTE II 2 G Ex d IIC T6 Ex t A21 IP 66/67 T85 C Limit switches EX COE CERTIFICAZIONE SIRA 07 ATEX 1316 CERTIFICATE IECEx SIR 07.0104 IRETTIVA 94/9/CE IRECTIVE NORME EN 60079-0
PST4. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
81 PST4 FLAT FACE/SCREW VITE VALVOLA PIANA/ACCIAIO FLAT FACE SCREW COUPLINGS/STEEL FLACHDICHTENDE SCHRAUBKUPPLUNGEN/STAHL COUPLEURS FACE PLANE A VISSER/ACIER Nominal size Max working pressure Rated flow
Cartridge Valves Technical Information Directional Valves DCV 03
OVERVIEW DCV 03 directional control valves consist of: housing (1), control spool (5), with two centering springs (4), and cylindrical operating solenoids (2, 3). The three-position directional valves
PAO1-PAOC. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
127 PAO1-PAOC Caratteristiche tecniche ISO A PASSAGGIO LIBERO/ACCIAIO FREE FLOW/STEEL FREIER DURCHLAUF/STAHL PASSAGE LIBRE/ACIER I PAO1 Nominal size Max working pressure Rated flow Max flow rate Min burst
Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid
Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid FEATURES Relief valve for pressure up to 50 bar (725 psi). Inlet and outlet connections:
DLN DIF >112< PREZZI / PRICES. N. mm* A A A A A A A A
DIF DLN PREZZI / PRICES 90 Caratteristiche: Diffusori lineari a feritoie con deflettore a goccia. Costruzione: Alluminio anodizzato estruso, deflettore nero RAL 9005 in polipropilene (bianco RAL 900 su
WEIGHT Kg. S10N 10 Hex. ch ,185 0,84 4,5 40 0,4 30. S10P 10 3/8-1/2 Hex. ch ,235 0,84 4,5 40 0,4 30
N TYPE P TYPE A TYPE SAFETY VALVES WITH FREE DISCHARGE IN THE AIR TYPE d0 Ø DN "G. A B Ø H WEIGHT Kg. K LIFT PN SET PRESSURE ADJUSTMENT S10N 10 Hex. ch.22-84 0,185 0,84 4,5 40 0,4 30 S10P 10 3/8-1/2 Hex.
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
Sez./Section V Valvole varie Various valves
Sez./Section V Valvole varie Various valves Esclusori manometro Gli esclusori manometro vengono impiegati negli impianti idraulici per isolare il manometro dalla linea di pressione, proteggendola da eventuali
VILLA VALVOLE Sez. D
VIA VAVOE Sez. D Valvole a valves VAVOE A SFERA A MANICOTTI BA VAVES SCREWED ENDS in bronzo e in ottone bronze - brass Pag. 2 in acciaio inox stainless steel Pag. 3 in acciaio inox in tre pezzi Stanless
GNS. Attuatori pneumatici per taglierini GNS. Air nipper actuators (series GNS)
GN ttuatori pneumatici per taglierini GN Tre taglie disponibili. Ingombri ridotti. Compatibili con vari modelli di lame standard. Con o senza slitta integrata. La slitta è a doppio effetto con molla in
Serie 300 PISTOLE DI SOFFIAGGIO BLOW GUNS. Quick Couplings AGGIORNAMENTO: 11 APRILE 2012 UPDATED APRIL 11, 2012
Serie 300 PISTOE DI SOFFIAGGIO BOW GUNS AGGIORNAMENTO: 11 APRIE 2012 UPDATED APRI 11, 2012 13.59 Caratteristiche Tecniche / Technical Characteristics Scheda Materiali / Specifications 1 Attacco terminale
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
FR314ST-FR338ST-FR312ST-FR334ST
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com FR314ST-FR338ST-FR312ST-FR334ST Stainless steel AISI 316L filter regulator for air, gas
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
210FR. Aluminum medium pressure filter regulator, suitable for compressed air FEATURES. Filter-Regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 210FR Aluminum medium pressure filter regulator, suitable for compressed air FEATURES Filter-Regulator
R Stainless steel AISI 316L pressure regulator for laboratory use FEATURES. Pressure regulator for inlet pressure up to 20 bar (290 psi).
R32010 Stainless steel AISI 316L pressure regulator for laboratory use FEATURES Pressure regulator for inlet pressure up to 20 bar (290 psi). Inlet connection suitable for ID Insert Deal Presa Universale,
SP N_S. Ventilconvettori Fan Coil Units. Parti di ricambio / Spare parts
SP252-0411 Ventilconvettori Fan Coil Units Parti di ricambio / Spare parts Ventilconvettore modello da incasso con ventilatore centrifugo fan coil concealed unit with centrifugal fan 1 2 3 4 5 6 7 G E
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
Directional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
Incassi a terreno - Recessed floor fittings INGROUND180. arcluce.it. inground
Incassi a terreno - Recessed floor fittings INGROUND180 93 Predisposto per controllo via BLE, per dettagli contattare l azienda. Suitable for BLE control device, for details consult the factory. APPARECCHIO