How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 1 of 10

Size: px

Start display at page:

Download "How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 1 of 10"

Veronica Dennis
5 years ago
Views:

1 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 1 of 10 e30tech.com Forums> Technical> Appearance How To Guide: Replace airbag steering wheel with non-airbag wheel User Name User Name Password Remember Me? Log in Register FAQ Members List Sponsors Advertise Shop Today's Posts Search Page 1 of > Last» Thread Tools Display Modes , 06:00 PM #1 ciz28 Member E30: is Location: Redmond, WA Join Date: Dec 2007 Posts: 77 How To Guide: Replace airbag steering wheel with non-airbag wheel I never found a comprehensive step-by-step guide on how to replace an airbag steering wheel with a non-airbag steering wheel, so I wrote up the process I went through. Hope this can be helpful for some of you. Tools Needed: M-Tech I steering wheel Steering wheel spacer (Part # ) 22mm or 7/8" socket Ratchet wrench Slotted screwdriver Phillips screwdriver Torx T30 screwdriver 8mm or 5/16" screwdriver Pliers The steering wheel spacer can be found here at Real OEM: You should be able to purchase one from your local BMW dealer, or online at Tischer BMW for $5.43:

There are two screws on the back of the steering wheel at 3 o'clock and 9 o'clock. Disconnect the orange plug from the airbag and set aside.

2 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 2 of 10 Use a Torx T30 screwdriver to remove the airbag from the steering wheel. There are two screws on the back of the steering wheel at 3 o'clock and 9 o'clock. Disconnect the orange plug from the airbag and set aside. Make sure the key is removed and engage the steering lock. Use a 22mm socket and ratchet wrench to remove the nut holding the steering wheel onto the spindle. Insert the key to disengage the steering lock. Remove the steering wheel and set aside.

This is only needed for an airbag steering wheel and will cause a non-airbag steering wheel

3 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 3 of 10 Use pliers to remove the white pin at the 11 o'clock position. This is only needed for an airbag steering wheel and will cause a non-airbag steering wheel to bind up. Use a small slotted screwdriver to pry the BMW emblem out of the center of the new steering wheel.

This should make sure the steering wheel turns freely without squeaking.

4 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 4 of 10 Apply some grease to the bottom of the steering wheel as shown in the picture. This should make sure the steering wheel turns freely without squeaking. Make sure the key is in the ignition and the steering lock is disengaged. Slide new steering wheel onto the spindle. Then place the additional spacer, washer, and nut onto the spindle

Optional Step: Removing the airbag will cause the indicator light in the check panel to flash. This step will disable the SRS system.

5 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 5 of 10 Remove the key and engage the steering lock. Tighten the nut on the spindle. Optional Step: Removing the airbag will cause the indicator light in the check panel to flash. This step will disable the SRS system. Remove the lower knee bolster using an 8mm screwdriver. Make sure the two plugs are removed from the door ringer. Remove the upper knee bolster using a Phillips screwdriver. Unplug the connectors going to the orange SRS control module.

One solution is to carefully bend the stalks back into a more comfortable position.

6 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 6 of 10 Optional Step: A non-airbag wheel will be much closer to the wiper/signal stalks. One solution is to carefully bend the stalks back into a more comfortable position. Mine broke when trying this, so I replaced them with stalks from a non-airbag car instead. To replace the stalks, remove the lower and upper knee bolster as described above. Remove the lower steering column casing with a Phillips screwdriver. Remove both stalks with a Phillips screwdriver and disconnect the plugs from under the dash. Reinstall new stalks. Guest Message Remove Advertisements , 06:08 PM #2

7 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 7 of 10 Low Level Senior Member E30: M3 Location: East Coast Join Date: Jan 2006 Posts: 1,365 Very nice!!! Well-written guide! So the stalks are specific to airbag and non-airbag cars, huh? Does the MTech1 installed on an airbag car sit the same distance from the dashboard as when it's installed in a non-airbag car? , 06:15 PM #3 ciz28 Member E30: is Location: Redmond, WA Join Date: Dec 2007 Posts: 77 Quote: Originally Posted by Low Level Very nice!!! Well-written guide! So the stalks are specific to airbag and non-airbag cars, huh? Does the MTech1 installed on an airbag car sit the same distance from the dashboard as when it's installed in a non-airbag car? Yes, the stalks are different for airbag and non-airbag cars. There is also a different turn signal stalk for full 13-button OBC cars. You can see the different variations at Real OEM. Swapping in the nonairbag stalks will make the gap behind the new non-airbag wheel more appropriate. I'm not sure if the distance from the dash is the same on an airbag car versus a non-airbag car. I do know that the distance from the dash is now shorter comparing my new M-Tech I wheel to my old airbag wheel. Maybe someone that has both an airbag car and a non-airbag car can chime in on this one , 08:09 PM #4 Real Classic Coming Soon sticky? E30: SOLD Location: Pottstown, Pa Join Date: Oct 2007 Posts: , 08:21 PM #5 winfred Contributing Member i actually like the airbag stalks with the regular wheel, you pretty much don't need to change your grip on the wheel to hit the wipers or sig's, it doesn't take long to get use to the closeness Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. E30: is m20b28 with a hair drier and some other goodies Location: baton rouge loserana Join Date: Jan 2006 Posts: 3, , 08:58 PM #6 jpod999 Senior Member E30: i 4dr Location: SF bay area Good write up. This will probably help a lot of people in the future.

$Posted by justin_l_ I vote sticky... E30: 1990 2dr alpine 1988 4dr cirrusblau Location: N.E. Phila Join Date: Sep 2007 Posts: 3,404 yep ye[\p my e30 trailer build thread http://www.$

8 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 8 of 10 Join Date: Dec 2006 Posts: 2, , 09:05 PM #7 justin_l_ DSM BUILDER I vote sticky... Do an M50 swap yourself- E30: DSM Location: Sanford Maine Join Date: Mar 2008 Posts: 5, , 09:51 PM #8 e30_from_philly Contributing Member Quote: Originally Posted by justin_l_ I vote sticky... E30: dr alpine dr cirrusblau Location: N.E. Phila Join Date: Sep 2007 Posts: 3,404 yep ye[\p my e30 trailer build thread TRAILER PROJECT COMPLETE GMW next? , 01:40 AM #9 asheridan07 Senior Member E30: is Location: Oklahoma Join Date: Sep 2007 Posts: 259 Does this swap disengage the horn? I didn't read anything about unplugging the horn from the airbag wheel and plugging it back up to the M-Tech 1? Just wondering... thanks

9 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Foru... Page 9 of 10 Guest Message Remove Advertisements , 12:21 PM #10 winfred Contributing Member horn works fine with my spacer method Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. E30: is m20b28 with a hair drier and some other goodies Location: baton rouge loserana Join Date: Jan 2006 Posts: 3,587 Page 1 of > Last» «Previous Thread Next Thread» Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts vb code is On Smilies are On [IMG] code is On HTML code is Off Forum Jump Appearance Go All times are GMT -4. The time now is 08:33 AM. Contact Us - e30tech.com Forums - Archive - Privacy Statement - Top

10 How To Guide: Replace airbag steering wheel with non-airbag wheel - e30tech.com Fo... Page 10 of 10 Powered by vbulletin Version Copyright , Jelsoft Enterprises Ltd.

E28/30 Homelink Install by Brad Denton

E28/30 Homelink Install by Brad Denton Page 1 of 7 e30tech.com Forums> Technical> Electronics & Lighting DIY Homelink Install User Name User Name Password Remember Me? Log in Register FAQ Members List Sponsors Advertise Shop Today's Posts Search