H50 SERIES GAS FRYERS Exploded Parts Views

Transcription

1 Exploded Parts Views INDEX ACCESSORIES... AIR PRESSURE SWITCH... ANCHOR STRAPS... BASKET HANGERS... BASKET LIFT ASSEMBLIES AND ASSOCIATED COMPONENTS... BASKET LIFT ROLLER BRACKETS AND ASSOCIATED COMPONENTS... BLOWER ASSEMBLIES AND ASSOCIATED COMPONENTS..., BURNER ASSEMBLIES..., BURNER IGNITION SYSTEM COMPONENTS AND ASSOCIATED HARDWARE... BURNER ORIFICES... BURNER RAILS..., CABINET ASSEMBLIES AND COMPONENT PARTS... FPH0 Cabinet... FPH0 Battery Cabinets... 0 FMH0 and MJH0 Cabinets... FMH0 and MJH0 Battery Cabinets... Filter Magic Cabinets... CABLE, IGNITION..., CASTERS AND ASSOCIATED HARDWARE..., CHAIN RESTRAINTS... COMPONENT BOX ASSEMBLIES AND ASSOCIATED PARTS... CONNECTORS, ELECTRONIC WIRING... CONTROL PANEL ASSEMBLIES... CONTROLLER ASSEMBLIES... CONVERSION KITS, GAS... CORDS, POWER... DOOR ASSEMBLIES... 0 DRAIN SAFETY SWITCHES... THRU,, DRAIN SYSTEM COMPONENTS... Filter Magic Square Drain Components..., FootPrint III Square Drain Components... THRU DRAIN VALVE ASSEMBLIES... THRU MJH0 Drain Valves... FMH0 Drain Valves... FPH0 Drain Valves... 0 FILTER WIRING BOXES..., FILTER PANS... FILTER MOTORS AND WIRING..., FILTER PUMPS AND WIRING..., FILTRATION COMPONENTS (OTHER THAN DRAIN COMPONENTS)... THRU

2 Exploded Parts Views FOOTPRINT III FILTER BASES... FLUE ASSEMBLIES..., FLUE CAPS... FRYPOT ASSEMBLIES AND ASSOCIATED PARTS... THRU GAS CONVERSION KITS... GAS MANIFOLD ASSEMBLIES AND COMPONENT PARTS... THRU GAS SUPPLY COMPONENTS..., GAS VALVES AND ASSOCIATED PARTS...0 THRU HIGH LIMIT THERMOSTAT... IGNITION CABLE..., IGNITION MODULES..., IGNITORS... INSULATION, FRYPOT...,, LEGS... MANIFOLDS, GAS... THRU MANIFOLDS, OIL RETURN... 0 MODULES, IGNITION..., MICROSWITCH, DRAIN SAFETY... THRU, ORIFICES, BURNER... O-RINGS (FOR FILTER PANS)..., O-RINGS (FOR DRAIN VALVES)... THRU, 0 THRU O-RINGS (FOR POWER SHOWER)... OIL RETURN HANDLE ASSEMBLIES AND ASSOCIATED PARTS... THRU OIL RETURN HOSES AND FLEXLINES... THRU POWER CORDS... POWER SHOWER ASSEMBLIES AND ASSOCIATED PARTS... PROBE, TEMPERATURE... RELAYS... SOLENOID VALVES (FOR FILTRATION SYSTEMS)..., SOUND DEVICE... TEMPERATURE PROBE... THERMAL SWITCHES (FOR PUMP MOTORS)..., THERMOSTAT, HIGH LIMIT... TERMINAL BLOCKS... TOP CAPS... TRANSFORMERS/TRANSFORMER WIRING BOXES... THRU TUBING, VENT (FOR FILTRATION SYSTEMS)... VALVES, DRAIN... THRU VALVES, GAS...0 THRU WIRING HARNESSES, WIRING ASSEMBLIES, AND PLUG ASSEMBLIES...

3 Exploded Parts Views Accessories 0-0 Basket Support Rack, Dual Vat * 0-0 Basket Support Rack, Full Vat 0-0 Basket Support Screen, Full Vat * 0-00 Basket, Full (cannot be used with basket lifts) * 0-00 Basket, Twin - Connecting Strip w/back plate (Burger King only) 0-0 Connecting Strip (sharp point, ½ sides,. long) 0- Connecting Strip (sharp point, sides,. long) 0-SP Connecting Strip (sharp point, sides,. long) 0- Connecting Strip (sharp point, sides,. long) 0- Connecting Strip (blunt point, ½ sides, 0.0 long) 0- Connecting Strip (blunt point, sides, 0.0 long) * 0- Cover, Frypot, Dual Vat * 0- Cover, Frypot, Full Vat 0- Gas Line, Dormont, w/quick disconnect fitting, 0- Gas Line, Dormont, w/quick disconnect fitting, 0-00 Sediment Tray, Full Vat 0-00 Sediment Tray, Split Vat, Left * 0-00 Sediment Tray, Split Vat, Right * Not illustrated.

4 Basket Lift Assemblies and Component Parts Bell Crank Basket Lifts 0 0 VIEW LOOKING FROM FRONT OF FRYER DETAIL OF LEVELING SCREW ASSEMBLY VIEW LOOKING FROM REAR OF FRYER -0 Basket Lift Arm, Left -0 Basket Lift Arm, Right 0-0 Rod, Basket Lift 0-00 Ring, Truarc Retaining -00 Bushing, Bronze 0-00 Pin, Connecting 0-0 Link, Basket Lift 0-00 Gear Motor, 0V Basket Lift 0-00 Gear Motor, 0V Basket Lift 0-00 Bellcrank and Cam Leveling Screw 0-0 Bushing, Plastic 0-00 Microswitch 0-0 Washer, Steel, / - Washer, Nylon 0-00 Spacer, Tubular * 00- Panel, Access, CRS * 0- Panel, Access, SS * 0-0 Wiring Harness, Basket Lift Motor, Unitary * 0-0 Wiring Harness, Non-Modular Basket Lift * 0-0 Screw, Gear Motor Mounting, Slot Head, - x ½ * 0-00 Screw, Gear Motor Mounting, Hex Head, - x ½ * Not illustrated.

5 Modular Basket Lifts (Illustrations on following pages) Common Components -00 Bushing, Bronze,.0 ID 0- Chassis, Modular Basket Lift, Left 0- Chassis, Modular Basket Lift, Right 0-0 Connector, -Pin Female, Panel Mount 00- Gusset, Modular Basket Lift Motor -0 Insulation, Microswitch 0- Microswitch 0- Motor Assembly, Modular Basket Lift 00- Mount, Modular Basket Lift Ring, Truarc Retaining 0-0 Rod, Modular Basket Lift * µfarad, 0VAC (used in some versions prior to January ) 0-. µfarad, 0VAC Resistors 0-0 Resistor Assembly, 0V Modular Basket Lift (used in 0-SP) 0- Resistor, watt, ohm (0-SP) 0- Resistor, 0 watt, 00 ohm (used in 0-SP) Wire Assemblies WIR00 For 0-SP 0- For 0-SP Complete Assemblies 0-SP 00/0V w/o Relay 0-SP 0/0/0V w/o Relay * Not illustrated.

6 0 00/0V Modular Basket Lift Assembly P/N 0-SP

7 0 0/0/0V Modular Basket Lift Assembly P/N 0-SP

8 Blower Assemblies and Associated Components Related Views C FROM XFMR BOX C FROM PLUG C FROM XFMR BOX C FROM PLUG 0

9 Blower Assembly, Left - 0V 0 Hz,. housing, Non-CE units -0 0V 0 Hz,. housing, CE units Blower Assembly, Right - 0V 0 Hz,. housing, Non-CE units -0 0V 0 Hz,. housing, CE units 0-0 Connector, -Pin, Female (included with Items and ) 0-0 Connector, -Pin, Male (included with Items and ) - Terminal, Split Pin, Male (included with Items and ) * 00- Shield, Blower Motor 00- Shield, Lower Blower - Blower Box, CE units (use w/. wide blower housings only) 0- Shield, Blower, Left, CE units (use w/. wide blower housings only) 0- Shield, Blower, Right, CE units (use w/. wide blower housings only) Shutter, Blower Shield, CE units (use w/0- & 0-) - Blower Box, CE units (use w/. wide blower housings only) 0- Shield, Blower, Left, CE units (use w/. wide blower housings only) 0- Shield, Blower, Right, CE units (use w/. wide blower housings only) 0-0 Shutter, Blower Shield, CE units (use w/0- & 0-) * Not illustrated. Notes: For Full Vat units, use Blower Assembly - (Non-CE) or -0 (CE). Orders for - and - may be filled with either FASCO (black) or KOOL- TRONICS (silver) blowers. Some earlier CE units were built with blowers having housings. inches (. cm) wide. Current production CE-units are built with blowers having housings. inches (. cm) wide. When ordering replacements for CE units, the width of the blower housing must be verified to ensure the correct blower is provided. Blowers and shield components are not interchangeable between the. inch (. cm) and. inch (. cm) housings.

10 Burner Ignition System Components and Associated Hardware Honeywell 0- Air Pressure Switch (use 0- in fryers using 00VAC power supply) 0-00 Ignition Module, Honeywell, V (closed box design) * 0- Ignition Module, Honeywell, V (open board design) 0- Ignition Cable, (. cm) 0-00 Ignition Cable, (. cm) Ignitor Assembly -0 Natural Gas (G0, G) -0 Propane Gas (G) -00 Gasket Orifice, Natural Gas (G0, G) mm (0- FT, 0- M) mm (000- FT, - M) -. mm (000- FT, - M) -.0 mm (000-0, FT, - M) -.0 mm (,000-,000 FT, - M) Orifice, Propane Gas (G) mm (0- FT, 0- M, CE units) mm (0- FT, 0- M, Non-CE units) -. mm (000- FT, - M) -. mm (000- FT, - M) -0.0 mm (000-0, FT, - M) -. mm (,000-,000 FT, - M) Orifice, Other Gases -. mm, Butane (0- FT, 0- M) 0-. mm, Propane/Natural Gas Mixture (0- FT, 0- M) -.0 mm, Manufactured Gas (0- FT, 0- M) 0-00 ½ Nut and Sleeve Assembly for use w/ Ferrule for use w/- * - Conversion Kit, Natural Gas (G0, G) to Propane Gas (G) Contains Ignitor -0, Orifice 0-0, and Valve Spring 0- * - Conversion Kit, Propane Gas (G) to Natural Gas (G0, G) Contains Ignitor -0, Orifice 0-00, and Valve Spring 0- * KIT-0SP High Altitude Blower Kit (use w/fasco blowers at >000 FT, M) * Not illustrated. 0

11 Cabinet Assemblies and Component Parts FPH0 0 CABINET ASSEMBLY SINGLE FPH0 (0- C/R and 0- S/S) 00- Back, Cabinet 0- Base Assembly 00- Brace, Cabinet, Front 00- Brace, Cabinet, Top 0-0 Gusset, Left 0-0 Gusset, Right * 0-0 Leg, Adjustable 00- Motor Mount 00- Plate, Rail Mount 0- Rail Assembly 0 0- Side, Cabinet, CR, with access holes, Left 0 0- Side, Cabinet, CR with access holes, Right - Side, Cabinet, SS, with access holes, Left - Side, Cabinet, SS, with access holes, Right 00- Support, Cantilever * 0- Rear Extension, Left Side * 0- Rear Extension, Right Side * 00- Bracket, Transformer Mounting * 00- Cover, Rear Extension * Not illustrated.

12 FPH0 Batteries TOP VIEW A SECTION A-A NOTE: CABINET SIDE AND GUSSET NOT SHOWN FOR CLARITY. A FRONT VIEW NOTE: CE CABINETS ARE SAME AS NON-CE CABINETS EXCEPT THAT CENTER BRACE (ITEM ) IS NOT USED. 0 CABINET ASSEMBLY FPH0 (TYPICAL)

13 * 0- Back, Lower Cabinet, FPH0 0- Back, Lower Cabinet, FPH0 * 0- Back, Lower Cabinet, FPH0 * 0- Back, Upper Cabinet, FPH0 0- Back, Upper Cabinet, FPH0 * 0- Back, Upper Cabinet, FPH0 * 0- Base Assembly, FPH0 0- Base Assembly, FPH0 * 0-0 Base Assembly, FPH0 * 00- Brace, Cabinet Top, Rear, FPH0 00- Brace, Cabinet Top, Rear, FPH0 * 00- Brace, Cabinet Top, Rear, FPH0 * 00-0 Brace, Cabinet Top, Unitary, FPH Brace, Cabinet Top, Unitary, FPH0 * 00- Brace, Cabinet Top, Unitary, FPH0 00- Brace, Center, Double (Not used on CE units) 00- Bracket, Mounting 0- Channel, Side Support, Left * 0-0 Cover, Access Opening, Small * 0-00 Cover, Access Opening, Large 00- Divider, Cabinet Gusset, Cabinet, Left * 0-0 Gusset, Cabinet, Right (FPH0 only) 00- Lock, Filter 00- Post, Door, Long 00- Post, Door, Short -0 Rail, Filter, Top, Left -0 Rail, Filter, Top, Right 0- Rail, Filter, Unitary 00- Side, Cabinet, w/no openings * - Side, Cabinet, Unitary w/access openings 0-0 Spacer, Door Post 00- Support, Cabinet Rear * Not illustrated.

14 FMH0 and MJH0 CABINET ASSEMBLY SINGLE FMH0/MJH0 (0- C/R and 0- S/S) and SPREADER CABINET ASSEMBLY (0- C/R and 0- S/S) 00-0 Back, Cabinet, CR, w/access Hole 00- Back, Cabinet, CR, w/o Access Hole 0-0 Back, Cabinet, SS, w/access Hole 0- Back, Cabinet, SS, w/o Access Hole * 00- Back, Spreader Cabinet, CR, w/access Hole * 00- Back, Spreader Cabinet, CR, w/o Access Hole * 0- Back, Spreader Cabinet, SS, w/access Hole * 0- Back, Spreader Cabinet, SS, w/o Access Hole 00- Base, Cabinet, One-Piece 00- Brace, Cabinet, Top 0- Side, Cabinet, CR, w/access Holes, Left 0- Side, Cabinet, CR, w/o Access Holes, Left - Side, Cabinet, SS, w/access Holes, Left - Side, Cabinet, SS, w/o Access Holes, Left 0- Side, Cabinet, CR, w/access Holes, Right 0- Side, Cabinet, CR, w/o Access Holes, Right - Side, Cabinet, SS, w/access Holes, Right - Side, Cabinet, SS, w/o Access Holes, Right * Not illustrated.

15 FMH0 and MJH0 Batteries 0 0 TOP VIEW FRONT VIEW CABINET ASSEMBLY FMH0/MJH0 (TYPICAL) * 0- Base Assembly, Cabinet, FMH0/MJH0 0- Base Assembly, Cabinet, FMH0/MJH0 * 00-0 Brace, Cabinet, Top, FMH0/MJH Brace, Cabinet, Top, FMH0/MJH0 * 00- Brace, Cabinet, Top, Rear, FMH0/MJH0 00- Brace, Cabinet, Top, Rear, FMH0/MJH0 00- Divider, Cabinet 00- Post, Door, Long - Side, Cabinet, SS, w/access Holes, Left 0- Side, Cabinet, CR, w/access Holes, Left 0- Side, Cabinet, SS, w/o Access Holes, Unitary 00- Side, Cabinet, CR, w/o Access Holes, Unitary 0-0 Spacer, Door Post and Rear Cabinet Support 00-0 Support, Contactor Box Support, Rear Cabinet * Not illustrated.

16 Filter Magic II 0 CABINET ASSEMBLY FILTER MAGIC II (0- S/S and 0- C/R) CABINET ASSEMBLY UNDERCOUNTER FILTER MAGIC II (0- S/S and 0- C/R)

17 00- Back, Cabinet, Undercounter, CR 0- Back, Cabinet, Undercounter, SS 00- Back, Cabinet, Unitary, CR 0- Back, Cabinet, Unitary, SS 00- Brace, Cabinet, Front 00- Brace, Cabinet, Top 00- Brace, Cabinet, Top and Center, Undercounter * 0-0 Channel, Left * -0 Channel, Left, SS, Undercounter 00- Channel, Rear Channel, Rear, Undercounter 0-0 Channel, Right -0 Channel, Right, SS, Undercounter Leg, Adjustable Leg, Filter Cabinet 0-0 Pad Assembly, Leg * 00- Plate, Rail Mount 0- Rail Assembly, Filter Pan * 0- Retainer, Leg Insert, Full Height 0- Side, Cabinet, CR, Undercounter, w/access Holes, Left - Side, Cabinet, SS, Undercounter, w/access Holes, Left 0- Side, Cabinet, CR, Undercounter, w/access Holes, Right - Side, Cabinet, SS, Undercounter, w/access Holes, Right 0- Side, Cabinet, CR, w/access Holes, Left - Side, Cabinet, SS, w/access Holes, Left 0- Side, Cabinet, CR, w/access Holes, Right - Side, Cabinet, SS, w/access Holes, Right 00-0 Sleeve, Filter Cabinet Leg, Undercounter 00- Stiffener, Cabinet Side * Not illustrated.

18 Casters, Legs, and Associated Hardware 0-0 Caster,, w/brake 0-0 Caster, Rigid,, w/o Brake 0-0 Caster, Swivel,, w/brake 0-0 Caster, Swivel,, w/o Brake 0-0 Leg Assembly, Nickel Plated 0-0 Leg Assembly, SS * 0- Leg Assembly, Set of, Nickel Plated -0 Anchor Strap Kit (for use on single fryers w/legs) -000 Chain Restraint Kit (for use on fryers w/casters) * Not illustrated.

19 Component Box Assemblies and Associated Component Parts 0 Common Components, Component Boxes 00-0 Box Component Cable, Ignition 0- -inch (. cm) inch (. cm) 0- Interface Board 0-00 Module, Ignition 0- Mount, Tie-Wrap (used on CE units only) -0 Paper, Insulating, Terminal Block 0-0 Relay, Basket Lift (for IFBs w/removable relays only) 0-0 Relay, Heat (for IFBs w/removable relays only) * 0-0 Sound Device * - Spacer, Ignition Module (behind module) * 0- Spacer, Interface Board, ⅝ (behind board) 0- Terminal Block, -piece, Screwless Wire Assembly, Ignition Module 0-0 Wire Assembly, Ignitor 0-SP Component Box Assembly, Full Vat, Non-CE 0- Component Box Assembly, Full Vat, CE 0-SP Component Box Assembly, Dual Vat, Non-CE 0-0 Component Box Assembly, Dual Vat, CE * Not illustrated.

20 Control Panel Assemblies, Flue Caps, Top Caps, and Related Components Basket Hanger, Universal - Basket Hanger, Burger King * 0-0 Basket Hanger, Wire Form 0-SP Control Panel Assembly, Single Fryer (use 0-SP on KFC fryers) 0-SP Control Panel Assembly, -Fryer Battery (use 0-SP on KFC fryers) * 0-SP Control Panel Assembly, -Fryer Battery (use 0-SP on KFC fryers) * 0-0SP Control Panel Assembly, -Fryer Battery (use 0-SP for KFC fryers) * 0- Control Panel Assembly, H0/FB Battery 0-0 Flue Cap, Single Fryer, w/lip 0- Flue Cap, Single Fryer, w/o lip 0-0 Flue Cap, Single Fryer, Burger King * -0 Flue Cap, Two-Fryer Battery * - Flue Cap, Two-Fryer Battery, Burger King * - Flue Cap, Three-Fryer Battery * - Flue Cap, Three-Fryer Battery, Burger King * - Flue Cap, Four-Fryer Battery, Universal 00- Flue Cap Support 00- Flue Cap Retaining Strip, Burger King * Not illustrated. 0

21 C F H0 SERIES GAS FRYERS Control Panel Assemblies, Flue Caps (Continued) * -00 Top Cap, Single Fryer 0-00 Top Cap, Two-Fryer Battery * -00 Top Cap, Three-Fryer Battery * -00 Top Cap, Four-Fryer Battery * -00 Top Cap, H0/GFB Battery 0-0 Mount, Three-Piece Roller Guide Bracket -00 Bracket, Roller Guide, Left -00 Bracket, Roller Guide, Right - Screw, ¼ 0 x ¼ 0-0 Spacer 0-0 Roller, Basket Lift Guide 0-00 Nut, ¼ 0 Cap 0- Mount, One-Piece Roller Guide Bracket (complete assembly 0-SP) * - Nut, Cage (receives Basket Hanger Screw) * 0-0 Screw, Basket Hanger * Not illustrated. Controller Assemblies C Y C L ON OFF ON OFF C Y C L? Frym as ter COMPUTER MAGIC Fry m a s t e r SOLID STATE L 0 R. Fry m a s t e r Computer Magic III 0-E Dual Vat (CE) 0-E Dual Vat (Non-CE) 0-E Full Vat (CE) 0-0E Full Vat (Non-CE) Basket Lift Timer 0- Dual Vat (CE) 0-E Dual Vat (Non-CE) 0- Full Vat (CE) 0-E Full Vat (Non-CE)

22 Controller Assemblies (Continued) Analog Controller 0-E Dual Vat (CE) 0-00E Dual Vat (Non-CE) 0-E Full Vat (CE) 0-00E Full Vat (Non-CE) Digital Controller 0-E Dual Vat (CE) 0-E Dual Vat (Non-CE) 0-E Full Vat (CE) 0-E Full Vat (Non-CE) * 0- KFC Computer (requires special control panel assembly see Page -) * Not illustrated. Door Assemblies Common Components (used in both door assemblies) 0- Door Pin Assembly 0- Handle, Door, Wireform, SS (must be ordered separately) 0-0 Hinge, Door, Universal (must be ordered separately) See specific door assembly -0 Panel, Door, Outer - Screw, #0 x ½ Phillips Head, Zinc Plated - Spring, Door Pin 0-SP Door Assembly, Universal (for use on units not equipped with FP III) * 0-00 Magnet, Door 00- Liner, Door 0-0SP Door Assembly, Universal, FPF (for use on FP III-equipped units) * 0-0 Magnet, Door 00-0 Liner, Door * Not illustrated.

23 Drain System Components Filter Magic II Square Drain Components, Standard Configuration Clamp Section (requires per connection) 0-00 Nut, ¼ 0 - Screw, 0 x ¾ -00 Seal (Connection Gasket) * -0 Kit, Clamp Assembly 00-0 Cover, Cleanout -00 Gasket, Cleanout * - Wing Nut, Cleanout Cover Retaining 00-0 Cover, Drain End Drain Sections -0 Dual Vat,. Long -0 Full Vat,. Long 0-0 End, Dual Vat,. Long -0 End, Full Vat,. Long -0 Extension, Spreader Cabinet,. Long -0 Drain Outlet, Fixed 0-0 Drain Outlet Assembly, Swivel, Complete -0 Drain Tube, Swivel 0-0 Knob, Clamping -0 Collar, Drain 0-0 Screw, 0-00 O-Ring,. ID -00 Grommet, Drain Tube 0 - Washer, Drain Tube Retaining 0-0 Nut, Drain Tube Retaining * Not illustrated.

24 Filter Magic II Square Drain Components, Foodmaker Configuration 0 KIT-0SP Clamp Assembly and Boot Kit * 0- Clamp Assembly Only (without Boot) -00 Boot (Connection Seal) 00-0 Cover, Cleanout -00 Gasket, Cleanout - Wing Nut, Cleanout Cover Retaining Drain Sections - Swivel Receiver, Left - Swivel Receiver, Right - Section, Open Both Ends,. Long -0 Section, Open Both Ends, Long -0 Section, Left End Closed,. Long 0 KIT-0 End Cap Kit (closes right end of -0 in filter left/middle units) -0 Drain Outlet, Swivel -00 O-Ring,. ID 0-0 Knob, Clamping 0-0 Screw, 0-00 Grommet, Drain Tube - Washer, Drain Tube Retaining 0-0 Nut, Drain Tube Retaining * Not illustrated.

25 FootPrint III Square Drain Components, Standard Configuration SQUARE DRAIN ASSEMBLY, FPH0 SQUARE DRAIN ASSEMBLY, FPH0-R 0 SQUARE DRAIN ASSEMBLY, FPH0-L SQUARE DRAIN ASSEMBLY, FPH0-R TYPICAL FP III STANDARD DRAIN CONFIGURATIONS KIT-0SP Clamp Assembly and Seal Kit -00 Boot (Connection Seal) - Left End Section, Dual Vat,.0 Long - Left End Section, Full Vat,. Long - Drain Outlet Section, Closed,. Long - Drain Outlet Section, Open, Dual Vat,. Long - Drain Outlet Section, Open, Full Vat,. Long - Drain Section, Dual Vat,. Long -0 Drain Section, Full Vat,. Long 0 - Drain Section, Left End, Dual Vat,. Long (stud left of center) - Drain Section, Right End, Dual Vat,. Long (stud right of center) - Right End Section, Dual Vat,.0 Long - Right End Section, Full Vat,. Long -0 O-Ring * - Wingnut * -0 Vent Tube, Teflon, ⅜ OD (FP III units manufactured after Sep ) * 0- Fitting, 0, Vent Tube (for use with Teflon vent tube -0) * Not illustrated.

26 FootPrint III Square Drain Components, Rear Flush Configuration SQUARE DRAIN ASSEMBLY, FPH0 SQUARE DRAIN ASSEMBLY, FPH0-R a a 0 SQUARE DRAIN ASSEMBLY, FPH0-L SQUARE DRAIN ASSEMBLY, FPH0-R TYPICAL FP III REAR FLUSH DRAIN CONFIGURATIONS KIT-0SP Clamp Assembly and Seal Kit -00 Boot (Connection Seal) - Left End Section, Dual Vat,.0 Long - Left End Section, Full Vat,. Long -0 Drain Outlet Section, Closed, Full Vat,.0 Long (one bracket) a -0 Drain Outlet Section, Closed, Dual Vat,. Long (two brackets) -0 Drain Outlet Section, Open, Dual Vat,. Long (one bracket a - Drain Outlet Section, Open, Dual Vat,. Long (two brackets) -00 Drain Outlet Section, Open, Full Vat,. Long (two brackets) -0 Drain Outlet Section, Open, Full Vat,. Long (three brackets) -0 Drain Section, Dual Vat,. Long (two brackets) 0 - Drain Section, Full Vat,. Long (one bracket) - Drain Section, Left End, Dual Vat,. Long (stud left of center) - Drain Section, Right End, Dual Vat,. Long (stud right of center) - Right End Section, Dual Vat,.0 Long - Right End Section, Full Vat,. Long - Handle and Microswitch Kit, rotation left - Handle and Microswitch Kit, rotation right -0 O-Ring * - Wingnut * Not illustrated.

27 FootPrint III Square Drain Components, Foodmaker Configuration KIT-0SP Clamp Assembly and Seal Kit -00 Boot (Connection Seal) - Left End Section,. Long - Drain Outlet Section, Open. Long -0 Drain Section,. Long - Right End Section,. Long -0 O-Ring * - Wingnut * Not illustrated.

28 Drain Valve Assemblies MJH0 Dual Vat Valve Assemblies,, Domestic and Export Models 0-0- DUAL VAT DRAIN VALVE ASSEMBLIES, " MJH0 DOMESTIC & EXPORT 0- Complete Assembly, Left 0- Complete Assembly, Right Components 0- Drain Valve, Universal, 0-0 Handle, Drain Valve, w/lock Pin, Left 0-0 Handle, Drain Valve, w/lock Pin, Right 0-0 Nut, -way Lock, ½ MJH0 Full Vat Valve Assemblies, ¼, Domestic and Export Models or 0- (W/Lock Pin) or 0- (W/O Lock Pin) FULL VAT DRAIN VALVE ASSEMBLIES, /" MJH0 DOMESTIC & EXPORT 0-SP Complete Assembly, Domestic Units 0-SP Complete Assembly, Export Units (Including CE) Components 0-0 Drain Valve, Gemini, ¼ 0-00 Handle, Drain Valve, w/o Lock Pin (used on domestic units) 0-0 Handle, Drain Valve, w/lock Pin (used on export units) 0-00 Nut, ½ w/flexloc stem -0 Sleeve, Valve Handle

29 FMH0 (CE) Dual Vat Valve Assemblies, Next View 0 0 COMPRESSION WASHERS FLAT WASHER COMPRESSION WASHERS FLAT WASHER NOTE: COMPRESSION WASHERS MUST BE TURNED FACE TO FACE AND LOCK NUT (0) MUST BE TORQUED TO 0 ± 0 IN LB. DUAL VAT DRAIN VALVE ASSEMBLIES, " FMH0 CE 0-0 Complete Assembly, Left 0-0 Complete Assembly, Right Components 0- Bracket, Drain Valve Microswitch, Left 0- Bracket, Drain Valve Microswitch, Right 0- Cover, Drain Safety Switch 0- Drain Valve, Gemini, -00 Grip, Plastic Handle 00-0 Handle, Drain Valve, Left 00-0 Handle, Drain Valve, Right -00 Insulation, RF Switch 0-0 Microswitch, w/roller cam Nut, -way Lock, ⅜- - Nut, Keps, 0, w/external teeth 0- Washer, Teflon

30 FMH0 Domestic and Non-CE Export Dual Vat Valve, Next View DUAL VAT DRAIN VALVE, " FMH0 DOMESTIC AND NON-CE EXPORT 0- Drain Valve, Gemini, 0-0 Handle, Drain Valve, Left 0-0 Handle, Drain Valve, Right FMH0 (CE) Full Vat Valve Assembly, ¼ COMPRESSION WASHERS PLASTIC WASHER NOTE: COMPRESSION WASHERS MUST BE TURNED FACE TO FACE AND LOCK NUT () MUST BE TORQUED TO 0 ± 0 IN LB. FULL VAT DRAIN VALVE, /" FMH0 CE 0-0SP Complete Assembly 0- Bracket, Drain Valve Microswitch 00- Cover, Drain Safety Switch 0-00 Drain Valve, Gemini, ¼ -00 Grip, Plastic Handle 00- Handle, Drain Valve -00 Insulation, RF Switch 0-0 Microswitch 0-00 Nut, -Way Lock, ½ - Nut, Keps, 0, w/external teeth 0

31 FMH0 Domestic and Non-CE Export Full Vat Valve Assembly, ¼ Next View COMPRESSION WASHERS PLASTIC WASHER NOTE: COMPRESSION WASHERS MUST BE TURNED FACE TO FACE AND LOCK NUT () MUST BE TORQUED TO 0 ± 0 IN LB. FULL VAT DRAIN VALVE, /" FMH0 DOMESTIC AND NON-CE EXPORT 0- Complete Assembly 0- Bracket, Drain Valve Microswitch 0- Cover, Drain Safety Switch 0-00 Drain Valve, Gemini, ¼ -00 Grip, Plastic Handle 00- Handle, Drain Valve -00 Insulation, RF Switch 0-0 Microswitch 0-00 Nut, -way Lock, ½ - Nut, Keps, 0, w/external teeth

32 FPH0 (CE) Dual Vat Valve Assemblies, Next View COMPRESSION WASHERS 0 0 COMPRESSION WASHERS FLAT WASHER FLAT WASHER PLASTIC WASHER PLASTIC WASHER NOTE: COMPRESSION WASHERS MUST BE TURNED FACE TO FACE AND LOCK NUT () MUST BE TORQUED TO 0 ± 0 IN LB. DUAL VAT DRAIN VALVE ASSEMBLIES, " FPH0 CE 0-0 Complete Assembly, Left 0-0 Complete Assembly, Right Components 0- Bracket, Drain Valve, Microswitch, Left 0- Bracket, Drain Valve, Microswitch, Right 00- Bracket, Drain Valve, 0- Cover, Drain Safety Switch 0- Drain Valve, Gemini, -00 Grip, Plastic Handle 00-0 Handle, Drain Valve, Left 00-0 Handle, Drain Valve, Right -00 Insulation, RF Switch Microswitch, w/roller cam 0-0 Nut, -way Lock, ⅜ - Nut, Keps, 0, w/external teeth -0 O-Ring, Drain Valve, 0- Washer, Teflon

33 FPH0 Domestic and Non-CE Export Dual Vat Valve Assemblies, Next View COMPRESSION WASHERS 0 0 COMPRESSION WASHERS FLAT WASHER FLAT WASHER PLASTIC WASHER PLASTIC WASHER NOTE: COMPRESSION WASHERS MUST BE TURNED FACE TO FACE AND LOCK NUT () MUST BE TORQUED TO 0 ± 0 IN LB. DUAL VAT DRAIN VALVE ASSEMBLIES, " FPH0 NON-CE 0-00 Complete Assembly, Left 0-0 Complete Assembly, Right Components 0- Bracket, Drain Valve, Microswitch, Left 0- Bracket, Drain Valve, Microswitch, Right 00- Bracket, Drain Valve, 0- Cover, Drain Safety Switch 0- Drain Valve, Gemini, 0-0 Grip, Plastic Handle -0 Handle, Drain Valve, Left - Handle, Drain Valve, Right -00 Insulation, RF Switch Microswitch, w/roller cam 0-0 Nut, -way Lock, ⅜ - Nut, Keps, 0, w/external teeth -0 O-Ring, Drain Valve, 0- Washer, Teflon

34 FPH0 Domestic and Export Full Vat Valve Assemblies, ¼ COMPRESSION WASHERS 0 COMPRESSION WASHERS PLASTIC WASHER PLASTIC WASHER NOTE: COMPRESSION WASHERS MUST BE TURNED FACE TO FACE AND LOCK NUT () MUST BE TORQUED TO 0 ± 0 IN LB. FULL VAT DRAIN VALVE ASSEMBLIES, /" FPH0 0- Complete Assembly, Domestic and Non-CE Export 0-0 Complete Assembly, CE Components 00- Bracket, Drain Valve, ¼ 0- Bracket, Drain Valve, Microswitch 00- Cover, Drain Safety Switch 0-0 Drain Valve, Gemini, ¼ 0-0 Grip, Plastic Handle (used w/0-) -00 Grip, Plastic Handle (used w/0-0) - Handle, Drain Valve (used w/0-) 00- Handle, Drain Valve (used w/0-0) -00 Insulation, RF Switch Microswitch (used w/0-) 0-0 Microswitch (used w/0-0) 0-00 Nut, -way Lock, ½ - Nut, Keps, 0, w/external teeth -0 O-Ring, Drain Valve, Table of Contents

35 Filtration Systems and Component Parts (Other Than Drain Components) Filter Magic II/Single FootPrint III Filter Pan Assembly 0 0 Fitting on outside bottom of inner pan. A B A 0-SP One-Piece Filter Pan Assembly, Complete -SP One-Piece Pan Only B 0-0SP Two-Piece Pan Assembly, Complete (Unique components are listed below.) -0SP Outer Pan Assembly -SP Inner Pan Assembly - Base, Filter Pan Assembly -0 Cover, Suction Tube 0-0 Clamp, Suction Tube -0 O-Ring,.0 OD * 0- Heater Strip Assembly * -0 Insulation, Foam # * -0 Tape, Aluminum (0-yard (m) roll) Components Used on Both Designs Caster, Rigid Caster, Swivel -0 Cover, Drain Pan 0-0 Crumb Screen 0-0 Hold Down Ring Assembly 00- SanaGrid Filter Screen 0-00 Handle, Filter Pan * 0-00 Paper, Filter (00 sheets) * Powder, Filter (00 -cup applications) * Not illustrated

36 FootPrint III Filter Pan Assembly 0 0- Pan Assembly, Complete (less Crumb Screen) -0 Cover 0-0 Hold Down Ring 0- SanaGrid Filter Screen - Pan 0- Retainer, Check Valve 00- Strain Plate, Check Valve 0-0 Spring, Check Valve 0-0 Ball, Check Valve 0- Tube, Check Valve 0-0 O-Ring, Check Valve 0-0 Screw, Shoulder * -00 Crumb Screen * 0-00 Paper, Filter (00 sheets) * Powder, Filter (00 -cup applications) * Not illustrated

37 FootPrint III Filter Base Assemblies Base Assembly 0-SP Used on Units Manufactured Before August Base Assemblies 0-SP & 0-SP Used on Units Manufactured August and Later 00- Cover, Suction Tube 00- Cover, Motor (August and later) * -0 Cover, Motor (Prior to August ) 00- Standoff, Filter Wiring Box - Support, Filter Pan 0-0 Frame, Left Side 0-0 Frame, Right Side 00- Bracket, Filter Pan Lock 00- Support, Filter Motor Rear 00-0 Support, Filter Motor Front Support, Filter Motor 0- Frame, Left Side (without built-in handles, used on 0-SP) 0- Frame, Right Side (without built-in handles, used on 0-SP) 0- Frame, Left Side (with built-in handles, used on 0-SP) 0- Frame, Right Side (with built-in handles, used on 0-SP) 0-00 Handle, Plated Diecast Metal Caster, Swivel * 00- Cover, Rear Plumbing (used on units built after August ) * Not illustrated. NOTE: Base assemblies 0-SP, 0-SP, and 0-SP do not include Suction Tube Cover, Motor Cover, or Plumbing Cover. These components must be ordered separately.

38 Filter Magic Oil Return Plumbing Components (Including Pump & Motors) 0 Filter Magic Oil Return Plumbing Typical Configurations Detail of Disconnect Components O-Rings fit into grooves of disconnect fitting.

39 NOTE: If the filter is to the left of a split vat unit, use the.-inch nipple (-0) in place of the -inch nipple (Item ). 0 Typical Split Vat Configuration Pump Motor - 00 VAC (with gasket -00) - VAC (with gasket -00) - 0VAC (with gasket -00) - 0 VAC (with gasket -00) -0 0 VAC (with gasket -00) * 0- Pump Wiring Assembly (this component is furnished with above motors) - Pump, GPM ( LPM) (with gasket -00) -0 Nipple, ½-inch x ½-inch -00 Elbow, ½-inch x 0º -0 Nipple, ½-inch x -inch -0 Pipe Plug, ½-inch -000 Tee, ½-inch 0-0 Flexline, ½-inch (. cm) Oil Return -0 Nipple, ½-inch x -inch Valve, ½-inch Ball 0-0 Handle, Right Valve -0 Elbow, ½-inch x 0º Street -00 Nipple, ½-inch Close - Disconnect Fitting -00 O-Ring ( required) 0-0 Handle, Left Valve 0- Flexline, -inch (. cm) Oil Return 0- Adapter, ½-inch, Female to Female (used with item only) 0-0 Flexline, ½-inch ( cm) Oil Return * -0 Nipple, ½-inch x ½-inch * 0-00 Thermal Switch, Baldor Motors * 0- Thermal Switch, Magnatek Motors * 0-0 Wiring Harness, Controller to Filter * 0-0 Heater Strip, 0 VAC * 0- Heater Strip, 0-0 VAC * -0 Tape, Aluminum (0-yard (m) roll) * Not illustrated

40 FootPrint III Filter Motors and Pump Plumbing Components 0 FPH0 Configuration Standard FP III Configuration (Prior to August ) 0 Standard FP III Configuration (August and Later) 0

41 Motor and Gasket Kits - 00VAC - VAC - 0VAC - 0VAC -0 0VAC - Pump, GPM (LPM) (includes gasket -00) 0- Valve, Solenoid Vent 0-0 Flexline, ½-inch (cm) Oil Return -00 Elbow, ½-inch x 0º -00 Nipple, ½-inch x close 0-0 Flexline, Oil Return (pump to rear manifold) 0-0 Flexline, ½-inch (.cm) Oil Return 0- Flexline, Pump Bypass 0-0 Elbow, ½-inch x 0º Street -0 Nipple, ½-inch x ½-inch -0 Nipple, ¼-inch x -inch -0 Elbow, ¼-inch x 0º Street -00 Nipple, ½-inch x -inch -0 Elbow, ½-inch -way -00 Bushing, ½-inch to ¼-inch Reducer - Flexline, ½-inch (cm) Oil Return Hose, Heated Oil Return 0-0 0VAC VAC 00- Support, Oil Return * -00 Gasket, Pump Motor * 0-00 Thermal Switch, Baldor Motors * 0- Thermal Switch, Magnatek Motors * 0- Pump Wiring Assembly, FPH0 * 0-0 Wiring Harness, Controller to Filter * Not illustrated

42 FPH0 with Split Pot on Left FPH0 with Split Pot on Right 0 TYPICAL FOOTPRINT III OIL RETURN PLUMBING CONFIGURATIONS Alternate Configuration for Split Pot on Left NOTE: Fryers manufactured between August and April had a one-piece welded oil return manifold. These manifolds have been discontinued and are no longer available. The fittings and flexlines listed in the accompanying table must be used to replace failed manifolds. Detail of Connection to Frypot 0 Frypot FootPrint III with Power Shower Oil Return Plumbing Components H0 SERIES GAS FRYERS

43 0- Manifold, Rear Oil Return 0-0 Hose, FP III Oil Return, -inch (. cm) 0- Fitting, ¼-inch NPT x 0º 0- Valve, Solenoid Vent -00 Nipple, ¼-inch NPT x Close -00 Tee, ½-inch x ¼-inch x ½-inch NPT Reducing 0-0 Flexline, Oil Return,.-inch ( cm) -000 Tee, ½-inch NPT -0 Nipple, ½-inch NPT x.-inch (. cm) Flexline, Oil Return, -inch (. cm) 0-0 Valve, ½-inch NPT Ball 0-0 Handle, Oil Return Valve (Right) -0 Plug, ½-inch NPT 0-0 Handle, Oil Return Valve (Left) -00 Reducer Bushing, ½-inch to ¼-inch NPT -0 Nipple, ¼-inch NPT x -inch -0 Reducer, ½-inch to ¼-inch NPT -0 Nipple, ½-inch NPT x.-inch 0-0 Flexline, Oil Return,.-inch (. cm) 0 0- Flexline, Oil Return, -inch (. cm) 0- Adapter, ½-inch NPT Male (converts female to male) -00 Nipple, ½-inch NPT x Close -00 Nipple, ½-inch NPT x.-inch * -0 Vent Tube, Teflon, ⅜-inch O.D. (sold by the foot (0. cm) length * -0 Insulation, Rubber NOTE: The following Oil Return Flexlines may also be used in some specially configured units. When ordering a flexline, it is recommended that the line be measured to ensure the correct item is ordered. * 0- Flexline, Oil Return, -inch (. cm) (male end fittings) * 0- Flexline, Oil Return,.-inch ( cm) (male and female end fittings) * 0-0 Flexline, Oil Return,.-inch (. cm) (female end fittings) * 0-0 Flexline, Oil Return, -inch (0. cm) (male and female end fittings) * 0- Flexline, Oil Return,.-inch ( cm) (male and female end fittings) * 0-0 Flexline, Oil Return, -inch (0. cm) (male end fittings) * 0-0 Flexline, Oil Return, -inch (. cm) (male end fittings) * 0-0 Flexline, Oil Return, -inch (. cm) (male end fittings) * 0- Adapter, ½-inch NPT Female (converts male to female) * Not illustrated

44 FootPrint III with Rear Flush Oil Return Plumbing Components 0 Hanger shown cut away to reveal elbow. FPH0-L Rear Flush (Typical)

45 -0 Elbow, ½-inch x 0º Street -0 Nipple, ½-inch x ½-inch -0 Elbow, ½-inch x º Street -00 Nipple, ½-inch x ½-inch 0-0 Valve, ½-inch Ball 0-0 Flexline, -inch (cm) Oil Return -00 Elbow, ½-inch x 0º 00- Hanger, Rear Flush 0-0 Nut, ¼-0 Serrated Flange 0-00 Nipple, ½-inch x -inch -000 Tee, ½-inch -0 Nipple, ½-inch x -inch -00 Nipple, ½-inch x -inch 0-0 Shaft, Rear Flush Valve 0-00 Clip, Rod End Clevis 0- Handle, Left Rear Flush Valve * 0- Handle, Right Rear Flush Valve * 0-0 Flexline, -inch (cm) Oil Return * Strip, Heater VAC, -inch (cm) VAC, -inch (cm) 0-0VAC, -inch (cm) VAC, -inch (cm) VAC, -inch (cm) 0-0-0VAC, -inch (cm) * -0 Tape, Aluminum (0-yard (m) roll) * Not illustrated

46 FPH0 Oil Return Plumbing (Including Handle) Control Panel Assembly 0 0 FPH0- Configuration (Typical)

47 0-0 Nut, 0- Keps 00-0 Cover, Switch 0-00 Locknut, /-inch x Nylon 0- Switch, Actuator 0-0 Washer, / Spring ( each) 0-0 Screw, -0 x ¾-inch 0-0 Microswitch, Roller-activated -0 Insulation, Microswitch 00- Mount, Microswitch Nut, -0 Keps 0- Bracket, Oil Return Valve 0-0 Flexline, Oil Return,.-inch (. cm) 0-00 Valve, ½-inch NPT Ball -00 Nipple, ½-inch NPT x Close -00 Elbow, ½-inch x 0º -0 Elbow, Street, ½-inch x 0º 0-0 Flexline, Oil Return, -inch (0. cm) 0-0 Flexline, Oil Return, -inch (. cm) 0-0 Grip, Oil Return Handle 0 0- Handle (Rod), Oil Return 00- Bracket, Oil Return Handle 0- U-Joint

48 Oil Return Handle Assembly, Filter Magic & Standard FootPrint III Bottom of Component Box 0 NOTE: Spacer 0-00 fits over Item Microswitch 0-0 Bracket, Microswitch 0-0 Bracket, Valve Handle 0-0 Handle, Oil Return -00 Sleeve, Handle 0-0 Swivel Fitting, Oil Return Valve Linkage 0-0 Linkage, Oil Return Valve Washer, Flat - Washer, Nylatron Screw, / x ¾ Hex Head 0-00 Nut, /, Hex Head, Nylon Lock * 0-00 Spacer, Tubular,. OD - Screw, 0 x ¾ Slot Head - Nut, Keps, 0 * Not illustrated.

49 Oil Return Handle Assembly, Rear Flush Units NOTE: THIS END OF ROD ENGAGES THE OIL RETURN VALVE ARM ON THE THREE-WAY BALL VALVE (0-00) AT THE REAR OF THE FRYPOT. NOTE: CAM IS INSTALLED WITH ROUNDED PORTION FACE UP (IF INSTALLED IN "ON" POSITION AS SHOWN). - Handle, Rear Flush 0-0 Shaft, Rear Flush Linkage -00 Insulation, RF Switch 0-0 Microswitch 0- Cover, Microswitch, Right 0- Cover, Microswitch, Left - Nut, Keps 0 - Set Screw, 0 x ¼ 0- Cam, Microswitch - Cover, Rear Flush Handle

50 Power Shower Assemblies (All Systems) FRAME CUT AWAY TO SHOW CONNECTION DETAIL 0- Power Shower Assembly, Dual Vat, Complete 0- Power Shower Assembly, Full Vat, Complete 0-0 Screw, Cleanout -000 Grip, Handle -0 Seal (Gasket) - O-Ring 0

51 Oil Disposal Systems Plumbing 0 Side Connection Configuration Rear Connection Configuration 0

52 0- Ball Valve with Microswitch Assembly 0-0 Quick Disconnect, ½-inch Male * 0-0 Nut, ½-inch Conduit (mounts between Item and Item ) - Screw, #0 x ½-inch Hex Head (Pkg of ) 0-0 Bracket, Oil Disposal Mounting (rear connection configuration) 0-0 Clamp, Hose (limits movement of plumbing through mounting bracket) 0-0 Bracket, Oil Disposal Mounting (side connection configuration) -00 Sleeve, Valve Handle 00- Handle, Oil Disposal Valve 0-0 Nut, -0 Hex Head Keps Microswitch, Roller Activated 00-0 Bracket, Microswitch Mounting 0-0 Valve, Gemini (without handle) 0-0 Screw, -0 x ¾-inch Round Head 0-0 Flexline, -inch (.cm) Oil Return -000 Tee, ½-inch x ½-inch x ½-inch -0 Nipple, ½-inch x -inch -00 Nipple, ½-inch x -inch -0 Nipple, ½-inch x -inch -00 Elbow, ½-inch x 0º 0-0 Plug, ½-inch Pipe -00 Nipple, ½-inch x ½-inch -00 Nipple, ½-inch x -inch -0 Nipple, ½-inch x -inch -0 Nipple, ½-inch x ½-inch -0 Nipple, ½-inch x ½-inch * Not illustrated.

53 Frypot Assemblies and Component Parts Replacement Frypots and Frypot Insulation Kits Replacement Frypot Assemblies, Complete 0-SP Full Vat, Power Shower & Rear Flush Ready, Natural Gas 0-SP Full Vat, Power Shower & Rear Flush Ready, Propane Gas 0-SP Full Vat, Power Shower & Rear Flush Ready, Manufactured Gas 0-SP Full Vat, Power Shower Ready, Natural Gas 0-SP Full Vat, Power Shower Ready, w/four Holes, Natural Gas 0-SP Full Vat, Power Shower Ready, w/four Holes, Propane Gas 0-SP Dual Vat, Power Shower & Rear Flush Ready, Natural Gas 0-0SP Dual Vat, Power Shower & Rear Flush Ready, Propane Gas 0-SP Dual Vat, Power Shower & Rear Flush Ready, Manufactured Gas 0-SP Dual Vat, Power Shower Ready, Natural Gas 0-SP Dual Vat, Power Shower Ready, Natural Gas, European 0-SP Dual Vat, Power Shower Ready, Manufactured Gas, European Replacement Insulation Kits -0 Full Vat, Complete -0 Full Vat, Burner Only -00 Dual Vat, Complete -0 Dual Vat, Burner Only NOTE: See pages - and - for replacement burner kits and replacement burner rails.

54 NOTE: All insulation and gaskets can be ordered in a single kit, P/N a b a b c FRYPOT ASSEMBLY, FULL VAT (0-SP, 0-SP, 0-SP, 0-SP, 0-SP, 0-) 0 Full Vat Frypot Assembly, with Power Shower, Component Parts H0 SERIES GAS FRYERS

55 Full Vat Frypot with Power Shower Component Parts -0 Plenum, Full Vat (Non-CE units) -0 Plenum, Full Vat (CE units) -00 Gasket, Plenum Chamber 00-0 Retainer, Plenum Chamber Gasket Spacer, / x / Long - Combustion Chamber Outer Front, Left -0 Insulation, Combustion Chamber, Outer - Combustion Chamber Outer Front, Right 00-0 Retainer, Sight Glass, ¾ -0 Insulation, Sight Glass Gasket 0-00 Sight Glass -0 Spacer, / x / Long 00-0 Retainer, Lower Front Insulation, Left 00- Retainer, Lower Front Insulation, Right -0 Insulation, Lower Front 00- Retainer, Upper Front Insulation -0 Insulation, Upper Front * -0 Retainer, Left Front Seal Insulation -0 Retainer, Right Front Seal Insulation -00 Insulation, Front Seal (for left and right) 00- Brace, Upper Oil Zone Insulation 0-0 Insulation, Upper Oil Zone -0 Insulation, Combustion Chamber Side (for left and right) 00- Retainer, Combustion Chamber Side Insulation (for left and right) -00 Insulation, Upper Burner Rail (for left and right) * -SP Burner Rail, Left -SP Burner Rail, Right a -0 Burner, Natural or Propane Gas (for left or right) b -0 Burner, Manufactured Gas (for left or right) c -0 Insulation, Burner a Frypot Assembly, Full Vat, with three holes (see page -) b Frypot Assembly, Full Vat, with four holes (see page -) -0 Insulation, Lower Rear 00- Back, Combustion Chamber, Right 00- Back, Combustion Chamber, Left Retainer, Rear Insulation and Combustion Chamber Back 0-00 Spacer, / x. Long 0-0 Bracket, Flue to Frypot Connection 0-SP Flue Assembly, Full Vat * Not illustrated.

56 NOTE: All insulation and gaskets can be ordered in a single kit, P/N a b a b c FRYPOT ASSEMBLY, DUAL VAT (0-SP, 0-SP, 0-0SP, 0-SP, 0-SP, 0-0, 0-SP) 0 Dual Vat Frypot Assembly, with Power Shower, Component Parts H0 SERIES GAS FRYERS

57 Dual Vat Frypot with Power Shower Component Parts -00 Plenum, Dual Vat (Non-CE units) - Plenum, Dual Vat (CE units) -00 Gasket, Plenum Chamber 00-0 Retainer, Plenum Chamber Gasket Spacer, / x / Long -0 Combustion Chamber Outer Front -0 Insulation, Combustion Chamber, Outer 00-0 Retainer, Sight Glass, ¾ -0 Insulation, Sight Glass Gasket -00 Sight Glass Spacer, / x / Long -0 Retainer, Lower Front Insulation -0 Insulation, Lower Front 0- Retainer, Upper Front Insulation -0 Insulation, Upper Front * -0 Retainer, Left Front Seal Insulation -00 Retainer, Right Front Seal Insulation -00 Insulation, Front Seal (for left and right) 00- Brace, Upper Oil Zone Insulation -0 Insulation, Upper Oil Zone -0 Insulation, Combustion Chamber Side (for left and right) Retainer, Combustion Chamber Side Insulation (for left and right) -00 Insulation, Upper Burner Rail (for left and right) * -SP Burner Rail, Left -SP Burner Rail, Right a -0 Burner, Natural or Propane Gas (for left or right) b -0 Burner, Manufactured Gas (for left or right) c -0 Insulation, Burner a Frypot Assembly, Dual Vat, with three holes (see page -) b Frypot Assembly, Dual Vat, with four holes (see page -) -0 Insulation, Lower Rear 0-0 Back, Combustion Chamber 00-0 Retainer, Rear Insulation and Combustion Chamber Back 0-00 Spacer, / x. Long 0-0 Bracket, Flue to Frypot Connection 0 0-0SP Flue Assembly, Dual Vat * Not illustrated.

58 Gas Manifold Assemblies and Component Parts CE Units a a a 0

59 Common Components, CE Units -0 Cap, Pipe, ½, BM -00 Elbow, x ¾, BM -0 Nipple, ¾ x ¾, BM -0 Nipple, ¾ x Close, BM -00 Adapter, NPT x BSPT Manifold Assemblies, Natural (G0, G), Complete 0-0 H0, Full Vat (H0) 0- H0, Dual Vat (H0-) 0- H0, Two Full Vats (H0) 0- H0, Two Dual Vats (H0-) 0 0- H0, Full Vat Left, Dual Vat Right (H0-R) 0- H0, Dual Vat Left, Full Vat Right (H0-L) 0- H0, Three Full Vats (H0) 0- H0, Two Full Vats, Dual Vat Right (H0-R) 0- H0, Full Vat, Two Dual Vats Right (H0-R) 0- H0, Three Dual Vats (H0-) 0-0 H0, Dual Vat Left, Two Full Vats Right (H0-L) 0- H0, Two Dual Vats Left, Full Vat Right (H0-L) Manifold Assemblies, Propane (G) 0- H0, Full Vat (H0) 0- H0, Dual Vat (H0-) 0- H0, Two Full Vats (H0) 0- H0, Two Dual Vats (H0-) H0, Full Vat Left, Dual Vat Right (H0-R) 0- H0, Dual Vat Left, Full Vat Right (H0-L) 0- H0, Three Full Vats (H0) 0- H0, Two Full Vats, Dual Vat Right (H0-R) 0- H0, Full Vat, Two Dual Vats Right (H0-R) 0- H0, Three Dual Vats (H0-) 0- H0, Dual Vat Left, Two Full Vats Right (H0-L) 0- H0, Two Dual Vats Left, Full Vat Right (H0-L) One-Piece Manifold (w/o valve or fittings) a 0-0 H0 a 0-0 H0 a 0-00 H0

60 Non-CE Units a a a 0 0

61 Common Components, Non-CE Units -0 Cap, Pipe, ½, BM -00 Elbow, x ¾, BM -0 Nipple, ¾ x ¾, BM -0 Nipple, ¾ x Close, BM Manifold Assemblies, Natural (G0, G), Complete 0-0 H0, Full Vat (H0) 0- H0, Dual Vat (H0-) 0- H0, Two Full Vats (H0) 0- H0, Two Dual Vats (H0-) 0- H0, Full Vat Left, Dual Vat Right (H0-R) 0 0- H0, Dual Vat Left, Full Vat Right (H0-L) 0- H0, Three Full Vats (H0) 0- H0, Two Full Vats, Dual Vat Right (H0-R) 0- H0, Full Vat, Two Dual Vats Right (H0-R) 0- H0, Three Dual Vats (H0-) 0- H0, Dual Vat Left, Two Full Vats Right (H0-L) 0- H0, Two Dual Vats Left, Full Vat Right (H0-L) Manifold Assemblies, Propane (G) 0- H0, Full Vat (H0) 0- H0, Dual Vat (H0-) 0- H0, Two Full Vats (H0) 0- H0, Two Dual Vats (H0-) 0-0 H0, Full Vat Left, Dual Vat Right (H0-R) 0 0- H0, Dual Vat Left, Full Vat Right (H0-L) 0- H0, Three Full Vats (H0) 0- H0, Two Full Vats, Dual Vat Right (H0-R) 0-00 H0, Full Vat, Two Dual Vats Right (H0-R) 0-0 H0, Three Dual Vats (H0-) 0-0 H0, Dual Vat Left, Two Full Vats Right (H0-L) 0-0 H0, Two Dual Vats Left, Full Vat Right (H0-L) One-Piece Manifold (w/o valve or fittings) a 0-0 H0 a 0-0 H0 a 0-00 H0

62 Gas Valve Assemblies and Associated Parts CE Gas Valve Assemblies A SCREW IS COMPONENT OF 0-0 C C 0 CAP ADJUSTMENT SCREW C C C C REMOVE THIS CAP AND THE ADJUSTMENT SCREW BELOW IT TO ACCESS VALVE SPRING 0 NOTE: GAS VALVE 0-0 SHIPS IN NATURAL GAS CONFIGURATION. THE UNPAINTED VALVE SPRING (ITEM ) MUST BE REPLACED WITH THE BLUE VALVE SPRING (ITEM ) TO CONFIGURE IT FOR PROPANE GAS. B & C SCREW IS COMPONENT OF 0-0 C C 0 CAP ADJUSTMENT SCREW C C C C REMOVE THIS CAP AND THE ADJUSTMENT SCREW BELOW IT TO ACCESS VALVE SPRING 0-/0- SHOWN. COMPONENT 0 FACES OPPOSITE DIRECTION FOR 0-/0-. NOTE: GAS VALVE 0-0 SHIPS IN NATURAL GAS CONFIGURATION. THE UNPAINTED VALVE SPRING (ITEM ) MUST BE REPLACED WITH THE BLUE VALVE SPRING (ITEM ) TO CONFIGURE IT FOR PROPANE GAS.

63 D CE Valve 0- shown with Typical Connection Fittings as listed in Common Components A 0- Valve Assembly, Natural Gas (G0, G), Full Vat, Complete A 0- Valve Assembly, Propane Gas (G), Full Vat, Complete B 0- Valve Assembly, Natural Gas (G0, G), Dual Vat Left, Complete B 0- Valve Assembly, Propane Gas (G), Dual Vat Left, Complete C 0- Valve Assembly, Natural Gas (G0, G), Dual Vat Right, Complete C 0- Valve Assembly, Propane Gas (G), Dual Vat Right, Complete D 0- Valve, Natural (G0, G) or Propane Gas (G) Common Components, CE Units 0-0 Accessory Kit, Honeywell CE Valve 0-0 Bushing, BM, ⅜ Snap-in 0-00 Bushing, Brass, ¼ x ⅛ NPT -00 Bushing, Flush, BM ½ x ¼ NPT 0-0 Connector, ¼ NPT x δ Male - Cover, Gas Valve, CE -0 Cross, Brass, ⅛ NPT (used w/0- & ) -0 Elbow, Brass, ⅛ NPT x ⅛ Tubing -00 Elbow, Brass, ¼ NPT x ⅜ OD Tubing 0-00 Elbow, Brass, Street, ¼ NPT (used w/0-,,, & ) -0 Nipple, BM, ⅛ x ½ NPT (used w/0-,,, & ) -00 Nipple, Brass, ⅛ x ½ NPT (used w/0- & ) - Nut, Hex, 0 w/external Teeth 00- Plate, Conduit, H0 Gas Valve 0-0 Screw, Zinc Plated, 0 x ¼ Pan-Head 0- Spring, Valve, Natural Gas (G0, G), Unpainted 0- Spring, Valve, Propane Gas (G), Blue 0- Tap, Pressure Test, ⅛ NPT -0 Tee, Brass, ⅛ NPT (used w/0-,,, & ) 0-0 Tee, Male Branch, Brass, ¼ NPT 0-0 CE Gas Valve (Replaced by 0- (Item D) and 0- (Item )) WIR-00 Wire Assembly (C, C, C) 0- Harness, Gas Valve Wiring (Used with 0- only) * Not illustrated.

64 Non-CE Gas Valve Assemblies A B 0 A A B B VIEW A - A VIEW B - B HONEYWELL NATURAL AND PROPANE GAS VALVES ROBERTSHAW MANUFACTURED GAS VALVE Common Components, Non-CE Units - Valve, Natural Gas (G0, G), Honeywell, Non-CE - Valve, Propane Gas (G), Honeywell, Non-CE -00 Adapter, ⅛ NPT x ⅛ Tubing -00 Bushing, Flush, ½ x ¼ -0 Cross, Pipe, Brass, ⅛ NPT (used w/full vat units) -00 Elbow, Male Branch, Brass, ⅜ x ¼ (used w/dual vat units) -00 Nipple, BM, ⅛ x -0 Plug, Pipe, BM, ⅛ -00 Tee, Male Branch, Brass, ⅜ x ¼ (used w/full vat units) 0-0 Tee, Pipe, Brass, ⅛ NPT (used w/dual vat units) 0- Valve, Manufactured Gas, Robertshaw, Non-CE A Valve Assembly, Full Vat, Complete (for illustration only) B Valve Assembly, Dual Vat, Complete (for illustration only) * Not illustrated.

65 Gas Supply Lines and Enrichment Tubes Enrichment Tube, FPH0, ⅛-inch x.0-inch x.00-inch CRS 0- Enrichment Tube, Left, ⅛-inch x 0-inch CRS 0- Enrichment Tube, Right, ⅛-inch x 0-inch CRS * -0 Enrichment Tube Blank (straight), ⅛-inch x.-inch * -0 Enrichment Tube Blank (straight), ⅛-inch x.-inch * -000 Enrichment Tube Blank (straight), ⅛-inch x.-inch 0-00 Fitting, Enrichment Tube/Ignitor Connection, ⅛-inch 0- Gas Supply Flexline, ⅜-inch x.00-inch 0- Gas Supply Flexline, ⅜-inch x.00-inch 0- Gas Supply Flexline, ⅜-inch x.00-inch 0-0 Compression Fitting, ⅜-inch (required for 0-, -, and -) 00- Gas Supply Tube, Manufactured Gas, Full Vat, Left Gas Supply Tube, Manufactured Gas, Full Vat, Right -00 Compression Fitting and Adapter, ½-inch (required for 00- and -) 0-00 Ferrule Nut, ½-inch (required for 00- and -) 0-0 Vent Tube, Gas Valve * Not illustrated.

66

67 Thermostats, Temperature Probes, and Related Components - High Limit Thermostat ( F/ C) 0-0 Temperature Probe 0-0 Probe Guard Transformer Box and Filter Box Component Parts T T TRANSFORMER BOX (TYPICAL) LOOKING IN FROM REAR OF FRYER FP III FILTER BOX (TYPICAL) LOOKING DOWN FROM REAR OF FRYER NOTE: The most commonly used components are underlined in the accompanying table. Transformers 0-0 V, 0VA, used in 00/0V H0 units 0-0 V, 0VA, used in 0/0V Non-CE FPH0 units V, 0VA, used in German/Dutch export units 0- /V, 0/0VA, used in 00/0V units other than Non-CE H0 0- /V, 0/0VA, used in 0/0/0/0 units 0- V, 0VA, used in 00V H0 units V, 0VA, used in 0V H0 units 0-00 V, 0VA, used in 0/0V Non-CE H0 units 0-00 V, 0VA, used in German/Dutch export units Power Cords 0-00/0V A w/grounded plug 0-00/0/0V A, w/o plug 0-00/0/0V A, w/o plug, used in German/Dutch export units Note: Cords must be locally terminalized for units in which used..

68 Transformer Box and Filter Box Component Parts (Continued) Terminal Blocks, Transformer Box 0-0 Terminal Block, -Pole, Lug Screws per pole 0- Terminal Block, -Pole, Binding Post per pole 0-0 Terminal Block, -Pole, Binding Posts per pole 0-0 Terminal Block, -Pin, Male Spade Terminals 0- Terminal Block, -Pole, -Quick Connects and -Lug Screw per pole 0- Terminal Block, Screwless 0- Terminal Block, Filter Box Grounding Lug, Transformer Box Connectors 0-0 -Pin Female 0- -Pin Female 0-0 -Pin Female 0-0 -Pin Female 0-0 -Pin Male 0- -Pin Male 0-0 -Pin Male Pin Male - Pin, Contact (Disconnect), Female (Pin Terminal) 0- Plug, Mate-N-Lock (Dummy Pin) 0-00 Relay, Pump Motor, V Coil, Amp 0- Relay, Pump/Heater, V Coil, Amp (-Pin) 0- Heater Light, FM II/Single FPH0 0- Resistor, FM II/Single FPH0 Heater Light Transformer Box, Complete 0-SP H0, 00/0V 0- H0, 0/0/0V 0- H0, CE 0-0SP H0, 00/0V 0 H0, 0/0/0V 0- H0, CE 0-SP H0, 00/0V 0- H0, 0/0/0V 0- H0, CE 0- H0, 00/0V 0-SP H0, 0/0/0V 0- H0, CE 0-00 H0/H0/H0 German/Dutch (Two V and one V Xfmr)

69 Transformer Box and Filter Box Component Parts (Continued) FP III Filter Box, Complete 0-00/0V, Generic (with dual voltage transformer 0-) 0-0/0/0/0, Generic (with dual voltage transformer 0-) Wiring Harnesses, Wiring Assemblies, and Plug Assemblies Filter Box Wiring NOTE: Most commonly used components are underlined. 0-0SP Harness, Filter Box, 0V (-Pin Female, -Pin Male Connector) 0-SP Harness, Filter Box, 0-0V (-Pin Female, Pin Male Connector) 0-SP Plug Assembly, Filter Box (-Pin Male Connector) 0-SP Plug Assembly, Filter Box (-Pin Male Connector) 0-0SP Plug Assembly, Filter Magic (-Pin Female Connector) 0-0SP Plug Assembly, Filter Magic (-Pin Female Connector) 0-SP Plug Assembly, FP III Non-Reversing (-Pin Female Connector, no dummy pin) 0-SP Plug Assembly, Heater, FP III Non-Reversing (-Pin Female Connector, no dummy pin) 0-SP Plug Assembly, FP III Non-Reversing (-Pin Female Connector w/dummy pin) 0-0 Plug Assembly, Heater, FP III Non-Reversing (-Pin Female Connector w/dummy pin) Main Wiring Harnesses NOTE: Most commonly used components are underlined. 0-0SP Basket Lift Motor, Unitary ( Female -Pin Connector) 0-0 Component Box to Basket Lift ( Male -Pin, Male -Pin Connector) 0-0 Component Box to FootPrint III Filter Box 0-0SP Component Box to Non-Modular B/L ( Male & Female -Pin Connector) Fryer-Fryer Connecting, Basket Lift ( Female -Pin, Blank Male -Pin Connector) 0-00 Fryer-Fryer Connecting, Non-B/L ( Female -Pin, Blank Male -Pin Connector) 0-0SP Transformer to Component Box ( Male -Pin Connector) 0- Transformer to Component Box ( Male -Pin, Male -Pin, Female -Pin Connector) 0- Transformer to Component Box, CE ( Male -Pin, Male -Pin, Fem -Pin Connector)