FilterQuick FQGLA-T Gas Fryer

Size: px

Start display at page:

Download "FilterQuick FQGLA-T Gas Fryer"

Esmond Morton
5 years ago
Views:

FilterQuick FQGLA-T Gas Fryer Parts Manual

1 FilterQuick FQGLA-T Gas Fryer Parts Manual This manual is updated as new information and models are released. Visit our website for the latest manual. FOR YOUR SAFETY Do Not Store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. * * Part Number: FRY_P_ /2017 Original Instructions

2 NOTICE IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS FRYMASTER EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS FACTORY AUTHORIZED SERVICERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICER.

3 Table of Contents CHAPTER 1: Parts List 1.1 Accessories Doors, Sides, Flue Caps, Top Caps and Casters Drain System Components Electronics and Electrical Components Component Boxes and Associated Components Power Distribution Boxes ATO (Automatic Top Off)/FIB (Filter Interface Board) /Filter Box Components VIB (Valve Interface Board) Components Power Reset Switch and USB Connector Wiring Main Wiring Harnesses SIB J1 to Components Ignition Wiring Harnesses SIB J2 to Components Frypots and Associated Components Full-Vat Frypot Components Dual-Vat Frypot Components Frypot Assemblies and Associated Parts Oil Return Manifolds Gas Supply and Combustion System Components Gas Valves and Associated Components Filtration System Components Filter Pan, Pump, Motor, etc Oil Quality Sensor (OQS) and Associated Parts ATO (Auto Top Off) Components JIB Cradle, JIB Cap and Pick-Up Assembly and JIB (ATO) Reset Switch ATO Pump Assembly Non-Bulk ATO Pump Assembly Bulk Bulk System Components Bulk Dispose Waste Valve Bulk Manifold and Accessories Datalink System Components Part Number: Part Number: FRY_P_ i

4 FQGLA30-T FILTERQUICK GAS FRYERS CHAPTER 1: PARTS LIST 1.1 Accessories Brush, Frypot Fryers Friend Low Oil Volume Frypot Hanger, Basket Hanger, Basket 2-Battery Hanger, Basket 3-Battery Nut, Cap ¼-20 Hi Profile SS Cover, Frypot, Dual Vat Cover, Frypot, Full Vat * SP Handle Kit, Frypot Cover (includes handle and screws) Basket Support Rack, Dual Vat Basket Support Rack, Full Vat * Basket Support Screen, Full Vat (screen w/handle used in place of Item 8) Connecting Strip, Frypot Gas Line, 1-Inch Dormont Flexible SP 36-Inch (for gas line only (w/o Items 11 and 12), use ) Inch (for gas line only (w/o Items 11 and 12), use ) Quick-Disconnect Fitting, 1-Inch Male Quick-Disconnect Fitting, 1-Inch Female Quick Disconnect Fittings, ¾-inch set (includes male and female connectors) Kit, Chain Restraint * Kit, Anchor Strap * Bracket, Locking Cabinet (used to lock into hoods) Bushing, Flexible Gas Line ( ) * Not illustrated. 1-1

5 1.2 Doors, Sides, Flue Caps, Top Caps, Flue Deflector and Casters Side, Cabinet Left Side, Cabinet Right Magnet, Door Door, Right (shown) * Door, Left Handle, Snap-In-Plastic Pin Assembly, Door * Spring, Door Pin * Retaining Ring * Hinge, Door Lower * Holder, Manual Caster without Brake Caster with Brake 9 Flue Cap-Stainless Steel Two Station Fryer (requires , and ) Three Station Fryer (requires , and ) Four Station Fryer (requires , and ) Five Station Fryer (requires , and ) Plate W/A, Basket Hanger w/ studs (used to mount basket hanger - one required per frypot) Pushnut, ¼ Retainer O-Ring,.139 x.250 Viton (used as a spacer between plate and flue cap) 10 Top Cap (Cap for 5-station fryer shown) Two Station Fryer Three Station Fryer Four Station Fryer Five Station Fryer * Not illustrated. 1-2

6 1.3 Drain System Components Drain Tube, Full-Vat Left Closed/Right End Open or Left Open/Right End Closed (Short) Drain Tube, Dual-Vat Left Closed/Right End Open or Left Open/Right End Closed (Short) Drain Tube, Downspout (3+ Battery) Drain Tube, Downspout Full-Vat (2 Battery) Drain Tube, Downspout Dual-Vat (2 Battery) Drain Tube, Full-Vat Left and Right Open (Short) Drain Tube, Dual-Vat Left and Right Open (Short) Drain Tube, Full-Vat Left and Right Open (Long) Drain Tube, Dual-Vat Left and Right Open (Long) Drain Tube, Full-Vat Left Open/Right End Closed (Long) Drain Tube, Dual-Vat Left Open/Right End Closed (Long) Valve, 1¼-inch NPT Rotary Actuator Sleeve Clamp 3.25 x 3.00 Double T-Bolt Clamp 3.25 x.75 Single T-Bolt * Vinyl Cap.218 x 500 * Not illustrated. 1-3

7 1.4 Electronics and Electrical Components Component Boxes and Associated Components Board, Interface SIB (Smart Interface Board) General Market/ Burger King Board, Interface SIB (Smart Interface Board) Taco Bell * Harness, Ignition Module Fenwal DV * Harness, Ignition Module Fenwal FV Module, Ignition Single Spark Fenwal Bracket, Ignition Module Fenwal Cover, Ignition Module Fenwal Cable, 12-inch Ignition * Connector, Rajah Transformer, 24VAC 80VA 100V-240V Fuse Holder Fuse 3.5A 250V Speaker 4ohm Relay, 7-sec. Time Delay 120V (U.S., Canadian & Mexico units) (only units w/ OIB sensor) Relay, 7-sec. Time Delay 220V, 230V, 240V & 250V (International units) (only units w/ OIB sensor) Relay, 24VDC SPDT OIB (Oil Is Back) Sensor (only on units with OIB sensor) Relay, Blower 12VDC Receptacle, C14 IEC Cord Inlet Receptacle, C14 IEC Cord Outlet Bushing,.875 Split Controller, FQ4000 General Market/Burger King Controller, FQ4000 Taco Bell * Lanyard, Controller Restraint See Wiring Diagrams in FQGLA30-T Service Manual for cable locations * Cable, P-Bus Left SIB to Right SIB * Cable, P-Bus w/ power Right SIB to VIB (Valve Interface Board) * Cable, C-Bus Right SIB to FIB (Filtration Interface Board) * Cable, C-Bus Right SIB to Right SIB (Connects component boxes together) * Cable, C-Bus w/ power 85 (Connects SIB to FIB) * Terminator, CAN End Communication RJ11 * Harness, Wire Right SIB J1 to Components * Harness, Wire Left SIB J1 to Components * Not illustrated. Recommended parts. 1-4

8 1.4.1 Component Boxes and Associated Components cont. * Harness, Wire SIB J2 to Components Full Vat * Harness, Wire SIB J2 to Components Dual Vat * Harness Assy, Power Blower * Cord, Power Distribution Box to Left Component Box * Cord, Power Component Box to Component Box * Adapter, RJ11 CAN to Legacy 6-pin CAN (Micro Mate & Lock) (connects OQS sensor to SIB bd) 5 * Not illustrated. Recommended parts Power Distribution Boxes Box Assembly, Power Distribution Relay, 30A DPDT 120VAC Coil (Master Power Reset) Strain Relief Receptacle, C14 IEC Cord Outlet Terminal, Post Cord set with ring terminals 68 (used on units without hood relay) Clamp, 3/8 Connector Bracket, Power Out Cord Tie Down See Wiring Diagram in FQGLA30-T Service Manual for cable locations * Cord, Power Distribution Box to Left Component Box * Cord, Power Distribution Box to FIB Box * Not illustrated. Recommended parts. 1-5

9 1.4.3 ATO (Automatic Top Off)/FIB (Filter Interface Board) /Filter Box Components Box Assembly, ATO/FIB Filter Board, FIB w/ Software General Market/ Burger King Board, FIB w/ Software Taco Bell Power Supply, 24VDC 130W ATO Actuators, Filter Pump, Top Off Pump Transformer,24VAC 80VA 100V-240V Relay, Filter Pump DPDT 24VDC Fuse, 250VAC 3.5A Fast Acting Holder, Fuse Receptacle, C14 IEC Cord Outlet * Bracket, Power Out Cord Tie Down Receptacle, C14 IEC Cord Inlet * Bracket, Power In Cord Tie Down Harness, Bulk Oil/Top off FIB Wire Assembly, Solid Shortening Heater Switch Harness, FIB Power Supply/Heat tapes Bushing,.875 Split Power Supply, 24VDC, 15W for KCCM SUI board PCB, Assy, CAN Bridge (Converts OQS CAN from 125K to 500K) Need PN of PCB w/ SW * Cable, Can Bridge Power/Communication 12 (Connects FIB to CAN Bridge board) * Adapter, RJ11 CAN to Legacy 6-pin CAN (Micro Mate & Lock)(connects OQS sensor/sib bd 5 ) Used w/out CAN Bridge Board. * Cover, ATO/Filter Box See Wiring Diagram in FQGLA30-T Service Manual for cable locations * Cord, Power Distribution Box to FIB Box, Filter Pump * Terminator, CAN End Communication RJ11 * Cable, C-Bus Right SIB to FIB (Filtration Interface Board) * Cable, C-Bus w/ power 85 (Connects SIB to FIB) * Cable, FIB to VIB Actuator Power * Not illustrated. Recommended parts. 1-6

10 1.4.4 VIB (Valve Interface Board) Components VIB Board Assembly Cover, VIB Board Housing Gasket, Actuator Power VIB Gasket, 20 pin VIB Connector Gasket, P-Bus VIB Connector Board, VIB with SW General Market/Burger King Board, VIB with SW Taco Bell Seal, Linear Actuator Board Panel, Assy VIB Box Bottom Stud Recommended parts Power Reset Switch and USB Connector Bracket Assy, USB Mounting Gas Switch Bezel, USB Port Plate, Backing USB Bezel Cable, USB 1-7

11 1.5 Wiring Main Wiring Harnesses SIB J1 to Components Full Vat Dual Vat Harness, Modular Wiring Gas Full Vat Harness, Modular Wiring Gas Dual Vat See and in the FQGLA30-T Service Manual for wiring diagrams. 1-8

12 1.5.2 Ignition Wiring Harnesses SIB J2 to Components Full Vat Dual Vat Harness, Ignition Wiring Gas Full Vat Harness, Ignition Wiring Gas Dual Vat (one per side of dual vat) See and in the FQGLA30-T Service Manual for wiring diagrams. 1-9

13 1.6 Frypots and Associated Components Full-Vat Frypot Components NOTE: All insulation and gaskets can be ordered in a single kit, P/N Kit contains the insulation and gaskets required burners. when replacing 1-10

14 1.6.1 Full-Vat Frypot Components cont SP Frypot Assembly Full-Vat M5G30U (NAT/PRO) Insulation Kit, Complete Full-Vat Insulation Kit, Burner Full-Vat Flue Assembly, Full-Vat Back, Lower Full-Vat Combustion Chamber Cover, Full-Vat Upper Insulation Cover, Outer Blanket Plate, FV Collector Mounting Brace, FV Rear Insulation Brace, Foam Deck Insulation Burner, Universal Replacement Low Oil Volume Insulation, Burner Sight Glass Insulation, Burner Insulation, Upper Burner Rail Insulation, Combustion Chamber Side SP Glass, Burner Sight Insulation, FV Rear Lower Insulation, FV LH/RH Front Seal Insulation, FV Lower Inner Front Insulation, FV Front Upper Insulation, FV Outer Front Insulation, Foam Deck Frypot, FV M5G30U Retainer, FV LH Upper Burner Retainer, FV RH Upper Burner Cover, FV Front Combustion Cover, FV Lower Front Insulation Front Upper Seal Weldment, FV LH Front Upper Seal Weldment, FV RH Retainer, Burner Sight Glass Bracket, Flue to Pot Strip, Pot/Fluecap Retainer, Plenum Gasket Gasket, Plenum Plenum, Full-Vat Domestic Plenum, Full-Vat Export (Non-CE, Non-Japan) Plenum, Full-Vat Export (Japan, CE) * Gasket, Ignitor Solaronics * Pot-to-Pot Gap Clip * Not illustrated. Recommended parts. 1-11

15 1.6.2 Dual-Vat Frypot Components NOTE: All insulation and gaskets can be ordered in a single kit, P/N Kit contains the insulation and gaskets required when replacing burners. 1-12

16 1.6.2 Dual-Vat Frypot Components cont. * SP Frypot Assembly Dual-Vat M5G30UD (NAT/PRO) * Insulation Kit, Complete Dual-Vat * Insulation Kit, Burner Dual-Vat Flue Assembly, Dual-Vat Plate Assembly, Dual-Vat Collector Cover, Dual-Vat Upper Insulation Cover, Dual-Vat Outer Blanket Back, Dual-Vat Lower Combustion Chamber Brace, Foam Deck Insulation Brace, Dual-Vat Rear Insulation Burner, Universal Replacement Insulation, Burner Sight Glass Insulation, Burner Insulation, Upper Burner Rail Insulation, Combustion Chamber Side SP Glass, Burner Sight Insulation, Dual-Vat Rear Lower Insulation, Dual-Vat LH/RH Front Seal Insulation, Dual-Vat Lower Inner Front Insulation, Dual-Vat Front Upper Insulation, Dual-Vat Outer Front Insulation, Foam Deck Insulation, Flue Collection Retainer, Dual-Vat RH Upper Burner Retainer, Dual-Vat LH Upper Burner Cover, Dual-Vat Front Combustion Cover, Dual-Vat Lower Insulation Riser W/A Dual-Vat Frypot Dual-Vat LH Upper W/A Seal Dual-Vat RH Upper W/A Seal Retainer, Sight Glass Bracket, Flue to Pot Strip, Pot/Fluecap Retainer, Plenum Gasket Gasket, Plenum * Gasket, Ignitor Solaronics Plenum, Dual-Vat Domestic Plenum, Dual-Vat Export (Non-CE, Non-Japan) Plenum, Dual-Vat Export (Japan, CE) Frypot, Dual-Vat M5G30UD * Pot-to-Pot Gap Clip * Not illustrated. Recommended parts. 1-13

17 1.6.3 Frypot Assemblies and Associated Parts Dual Vat Full Vat SP Frypot Assembly, Full-Vat M5G30U Natural/Propane SP Frypot Assembly, Dual-Vat M5G30UD Natural/Propane Actuator, Rotary 24VDC BLUE LH Actuator, Rotary 24VDC BLACK RH Valve, 1¼ NPT Drain Rotary Actuator M5G30U Valve, ½ NPT Return Rotary Actuator Adaptor, ½ NPT M/F Adaptor, Male ⅝ OD x ½ Flexline, ⅝ OD x Long Probe, ATO (Topoff) RTD Kit Probe, VIB (Auto Filtration) RTD Kit (only units with VIB probes) * Fitting, 3/16 CC x ¼ (Compression fitting used in probe kits) * Loctite 567, Tube 6 ML Probe, Temperature Cooking Kit Sensor Assy, Oil 100V (only units with OIB sensors) Sensor Assy, Oil 120V (only units with OIB sensors) Sensor Assy, Oil 220V International (only units with OIB sensors) Sensor Assy, Oil 230V International (only units with OIB sensors) Sensor Assy, Oil 240V and 250V International (only units with OIB sensors) Thermostat Assembly, HE FM High-Limit 425 F/218 C Kit Recommended parts. 1-14

18 1.7 Oil Return Manifolds Manifold, Two-Station Fryer Full Vat Manifold, Two-Station Fryer Dual or Mixed Vats Manifold, Three-Station Fryer Full Vat Manifold, Three-Station Fryer Dual or Mixed Vats Manifold, Four-Station Fryer Full Vat Manifold, Four-Station Fryer Dual or Mixed Vats Manifold, Five-Station Fryer Full, Dual or Mixed Vats * Cap, 15/16-inch Valve * Not illustrated 1-15

19 1.8 Gas Supply and Combustion System Components See pages 1-10 through 1-13 for burners and burner insulation part numbers. See Page 1-16 through 1-17 for details of gas valves and related components. 1 Ignitor Natural Gas (G20, G25) (includes gasket , which may be ordered separately and enrichment tubes) Natural Gas (G20, G25) (includes gasket , which may be ordered separately) Propane (G30, G31) (includes gasket , which may be ordered separately and enrichment tubes) Propane (G30, G31) (includes gasket , which may be ordered separately) 2 Blower Assembly, Combustion Air (includes harness and Item 3) SP 100V 50/60 Hz CE (Right) CE (Wide Body) Dual Vat 7 slots open SP 100V 50/60 Hz CE (Right) CE (Wide Body) Full Vat 8 slots open SP 100V 50/60 Hz CE (Right) 60Hz Specfic SP 115V-120V 50/60 Hz (Right) SP 220V 60 Hz (Right) SP V 50/60 Hz (Right) Non-CE International SP 230V 50/60 Hz CE (Right) CE (Wide Body) Cover, Blower Motor (component of all blowers listed above) * Harness Assembly, Blower Motor DV (component of blowers listed above) Harness Assembly, Blower Motor FV/DV (component of blowers listed above) Switch, Air Pressure Assembly FV ( switch alone) CE and Export Switch, Air Pressure Assembly DV ( switch alone) CE and Export * Not illustrated. Recommended parts. 1-16

20 1.9 Gas Valves and Associated Components 1-17

21 1.9 Gas Valves and Associated Components cont. Gas Conversion Kits Natural to Propane (LP) Full Vat Natural to Propane (LP) Dual Vat Propane(LP) to Natural Full Vat Propane(LP) to Natural Dual Vat 1 Valve, Non-CE Gas Natural Gas (G20, G25) 3.2WC Propane Gas (G30, G31) Kit Natural Gas Full Vat w/ flexlines and hardware Kit Natural Gas Dual Vat w/ flexlines and hardware Propane Gas (G30, G31) Kit, Propane Gas Full Vat w/ flexlines and hardware Kit, Propane Gas Dual Vat w/ flexlines and hardware Valve, CE Gas (G20, G25, G30, G31) Accessory Kit (contains parts to adapt Item 2 to specific fryer configuration) Tube, ⅛-inch Vent Bushing, ¾-inch OD x ½ -inch ID NPT Flush Gas Line, ⅜-inch OD X 15-inch SS Flexible Gas Line, ⅜-inch OD X 12-inch SS Flexible Gas Line, ⅜-inch OD X 9-inch SS Flexible (Used on some split pots) Tee, ¼ -inch NPT Brass Tee, ¼-inch Male NPT to ⅜-inch Tube Elbow, ¼-inch Male NPT to ⅜-inch Tube 90 (used on DV valve) Bushing, ½-inch NPT to ¼-inch NPT Flush Reducing 12 Orifice, Burner mm 75% Butane/25% Butane (Standard Elevation) mm Propane/Butane (G30, G31) mm Propane/Butane (G30, G31) ( Ft, M) mm Propane/Butane (G30, G31) ( Ft, M) mm Natural Gas (G20, G25) Australia Only DV mm Natural Gas (G20, G25) Australia Only FV mm Natural Gas (G20, G25) ( Ft, M) CE mm Natural Gas (G20, G25) ( Ft, M) mm Natural Gas (G20, G25) ( Ft, M) Fitting, ⅛-inch NPT Cross Adapter, ⅛-inch NPT to ⅛-inch Tube Tube, ⅛-inch OD X 5.40-inch Enrichment FV Tube, ⅛-inch OD X 4.80-inch Enrichment DV Tap, ⅛-inch NPT Pressure Tee, ⅛-inch NPT Female Elbow, ⅛-inch NPT X ⅛-inch Tube Compression Nipple, ⅛-inch NPT X Close Bushing, ¼-inch NPT to ⅛-inch NPT Reducing Tee, ¼-inch Male NPT to Female NPT Connector, ¼-inch Male NPT to ⅜-inch Tube Tee, ¼-inch Male NPT to Female NPT Street Nipple, ¼-inch NPT x 3-inch Recommended parts. 1-18

22 1.10 Filtration System Components Filter Pan, Pump, Motor, and Associated Parts Bridge, Filter Pan Assembly Mount, Female Suction Gasket, Filter Ramp Assy, Left Filter Ramp Assy, Right Filter Slide, Filter Pan SP Pan, Filter 14 inch ATO Basket, Crumb Tray 14 inch Hold-Down Ring 14 inch Sana Grid Filter Screen, 14 inch Pan, Filter 14 inch O-Ring ( ) (Qty. of 6; used w/ Item 10) Plug, ⅛-inch NPT Socket Head Pipe (used with Item 10) Screen, Suction Line Filter * Wrench, Filter Screen * Lanyard, Filter Screen Wrench Magnet, Pull Ring Caster, 2-inch Rigid Assembly, Filter Pan Switch Sensor * SP Sensor Assembly, Magnet Position 17 Pump plumbing may differ somewhat from illustration depending on configuration and date of manufacture. * Not illustrated. Recommended parts Motor and Gasket Kit V 50/60 Hz V 50/60 Hz V 50/60 Hz 1-19

23 Filter Pan, Pump, Motor, etc V 50/60 Hz V 50/60 Hz * Cord, Filter Motor Power Pump and Gasket Kit, 4 GPM Gasket, Pump/Motor * Cap Screw, 5/16-inch NC Hex (Connects pump to motor.)( washer) Nipple, ½-inch x Close NPT BM Elbow, ½-inch BM Nipple, ½-inch x 1.50-inches NPT BM Check Valve ½-inch NPT 1 PSI Adapter, Check Valve Close NPT Adapter, Female ⅞-inch OD x ½-inch Flexline, ½-inch x 9.50-inch (to oil manifold) Flexline, ¾-inch x 14-inch Oil Return (from filter pan) Elbow, Street 45 x ½-inch NPT Elbow, Reducing ¾-inch x ½-inch * Adaptor, Male ⅝ OD x ½ - Connects between elbow on incoming side of pump and OQS sensor. * Heater Strip Assembly, V 25W 18 * Heater Strip Assembly, V 25W 18 * Not illustrated. Recommended parts Oil Quality Sensor (OQS) and Associated Parts 826xxxx Kit, OQS FQ-Touch Gas 2-Batt. (Kit to add to existing FQ-Touch Gas Fryers) Needs New # like xxxx Kit, OQS FQ-Touch Gas 3, 4 and 5 Batt. (Kit to add to existing FQ-Touch Gas Fryers) Needs New # like Sensor, FilterQuick OQS Replacement Bugzilla 6472/6471 With USB stick with OCD files and firmware files. Needs New # like ( ) Flexline, ⅝ OD x 13-inch Retainer, OQS Sensor FQ Brace, OQS Sensor Mount (on opposite side for 2-battery) Mount, OQS Sensor FQ Lanyard, In-Line Filter Wrench, Pre-Filter Cap 1-20

24 1.11 ATO (Auto Top-Off) Components JIB Cradle, JIB Cap / Pick-Up Assembly and JIB (ATO) Reset Switch Cradle, JIB Cap, JIB Assembly Cap, JIB Bushing, Heyco Hose, JIB Tip Assembly, JIB Suction Hose Switch, Momentary JIB Reset Recommended parts ATO Pump Assembly Non-Bulk INSTALL O RINGS HERE Connects to Oil Return Manifold Tray, Top Off Stud Assy Fitting, Quick Connect Shurflo Pump O-Ring, Viton # Pump, ATO 24VDC Elbow, ½-inch BM Adaptor, Male ⅝ OD x ½ Flexline, ⅝ OD x 6.50-inch Check valve, ½ NPT 1 PSI Adapter, Check Valve Close NPT Cap, JIB Assembly Recommended parts. 1-21

25 ATO Pump Assembly Bulk Item 2 connects to a check valve before going into the oil return manifold Pump, Assy Top Off Bulk Pump, Shurflo 24VAC Flexline, ½ OD x 17-inch (Out to oil check valve and to return manifold) * Check valve, ½ NPT 1 PSI Flexline, ⅝ OD x inch (Inlet to Top Off Pump) Flexline, ⅝ OD x inch * Flexline, ⅝ OD x 36-inch * Flexline, ⅝ OD x 42-inch Solenoid Elbow, ¼ NPT x ⅜ Flare Fitting, Shurflo Connect Tee, Reducing ½ x ¼ x ½ Fitting Assy, Shurflo Connect O-Ring, Viton # Elbow, ½ BM Elbow, Street ½ x ½ NPT 90 BM Bushing, BM Flush Adaptor, Male ⅝ OD x ½ Nipple, ¼ NPT BM Close Tee, ½ x ½ x ½ BM Check Valve ½ NPT 4 PSI Adapter, Check Valve Close NPT Adapter, Female ⅞ OD x ½ Nipple, ½ x Close NPT BM Nipple, ¼ x 2.00 NPT Cap, JIB Assembly * Heater, Low Oil Volume ATO Pump Inlet 100V 40W 56 * Not illustrated. Recommended parts. 1-22

26 1.12 Bulk System Components Bulk Dispose Waste Valve Valve, Waste Dispose Low Oil Volume Stud Assy, Waste Valve Handle, Bulk Waste Valve Microswitch, Gold Sealed Valve, ½ Ball Retainer, Nut Return Valve Cover, DV Safety Switch Cover, DV Safety Switch Insulation, RF Switch 1-23

27 Bulk Manifold and Accessories 1-24

28 Bulk Manifold and Accessories cont Valve, Check ½ NPT 1 PSI Bulk Manifold Valve, Low Oil Volume Bulk Waste Assembly (see page 1-24 for parts) Bracket, W/A, Touch Bulk Connections Harness, Dispose/Pan Switch, Bulk Flexline, ⅝ OD x 8.50-inches long Flexline, ⅝ OD x 13-inches long Flexline, ⅝ OD x inches long Valve, 20 PSI Check Bulk Nipple, ½ x Close NPT BM Nipple, ½ x 4.50-inches NPT BM (used on 3, 4 and 5 battery units) Nipple, ½-inch x 2.50-inches NPT BM Adaptor, Male ⅝ OD x ½ Tee, ½ x ½ x ½ BM Adaptor, Check Valve Close Nipple Bushing, ½ x ¼ Adaptor, ½ NPT x 15/ Elbow, ½ BM Elbow, ¼ NPT x ⅜ Flare Elbow, W/Side Outlet ½ NPT Plug, Pipe ½ NPT SP Handle and Lock Assy, Gas Low Oil Volume Bulk Clip, Clevis Right Rod End Brace, Bulk Handle Cover, Bulk Handle Handle, Gas Low Oil Volume Bulk Waste Pull Lock, Bulk Waste Handle (includes keys) Recommended parts. * Not illustrated Datalink System Components Box Assy, FQ4000 KCCM Board PCB, Assy FQ4000 KCCM/SUI Cable, USB Receptacle Mount 1-25

29 1.13 Datalink System Components cont Cap, Dust Antenna Bracket, Remote Antenna Cable. Coax Cable, U. FL to RP-SMA Bulkhead Coupler, 8PBC to 8PBC Plate, Assy, Enclosure KCCM Board Seal, Enclosure KCCM Board Cover, Weldment, FQ4000 KCCM Board Cable, FQ4000 KCCM Communication/Power * Cable, RJ * Power Supply, 24VDC, 15W for KCCM SUI board (Located inside the FIB Filter/Topoff box) 1-26

30 FRYMASTER 8700 LINE AVENUE, SHREVEPORT, LA * * Welbilt provides the world s top chefs, and premier chain operators or growing independents with industry leading equipment and solutions. Our cutting edge designs and lean manufacturing tactics are powered by deep knowledge, operator insights, and culinary expertise. All of our products are backed by KitchenCare our aftermarket, repair, and parts service. CLEVELAND CONVOTHERM DELFIELD FITKITCHEN FRYMASTER GARLAND KOLPAK LINCOLN MANITOWOC MERCO MERRYCHEF MULTIPLEX 2017 Welbilt Inc. except where explicitly stated otherwise. All rights reserved. Continuing product improvement may necessitate change of specifications without notice. Part Number FRY_P_ /2017

FilterQuick FQGLA-T Gas Fryer

FilterQuick FQGLA-T Gas Fryer Parts Manual This manual is updated as new information and models are released. Visit our website for the latest manual. FOR YOUR SAFETY Do Not Store or use gasoline or other