VEHICLE DETAILS ADDITIONAL INFORMATION / SERVICE HISTORY
|
|
- Leon Gregory
- 5 years ago
- Views:
Transcription
1 Vintage & Prestige Classic Cars LTD Prestige House 9 Globe Industrial Estate Grays Essex, RM17 6ST Richard@vandp.net /1978 BUGATTI TYPE 59 GRAND PRIX REPLICA BUGATTI TYPE 59 GRAND PRIX REPLICA BUGATTI TYPE 59 GRAND PRIX REPLICA Year: 1933 Chassis no: Registration: CRM60T Price: SOLD VEHICLE DETAILS ADDITIONAL INFORMATION / SERVICE HISTORY 1933/1978 Bugatti Type 59 Grand Prix Replica Registration Number: CRM60T This Grand Prix Bugatti replica is based on a 4.2 litre Jaguar engine built to the highest standard and supercharged with a highly efficient helical blower. The blower is low pressure to ensure a smooth running engine with excellent low rpm torque characteristics but without the stress and issues associated with higher boost pressures. Overall this car is engineered to the very highest standards with many hundreds of bespoke components and absolutely no compromise to quality, reliability and detail. The gear change has been positioned on the right hand side through a similar style cross shaft to the original car. The central hand brake is cable operated per original. Many of the other controls are also closely based on the original. Cooling is by a correct honeycomb core radiator and a prototypical oil cooler mounted on the chassis.
2 Road equipped with mudguards and lights based on a style of a similarly equipped type 54. So from this point of view the replica is a type 59 with strong type 54 influence. This car is believed to be the best modern based Grand Prix Bugatti replica in existence and in sight, sound and feel, the nearest experience to a genuine pre war racing car. Technical Information: Cold Starting:- When starting from cold the engine and in particular the inlet manifold need to come up to operating temperature. There is a need to warm the engine at a steady and constant throttle opening to avoid pulling too much liquid fuel into the manifold before it is warm, this causes rough running and is not kind to both supercharger and engine. Blipping the throttle is to be avoided until the engine temperature gauge has risen off the stop pin. Ensure the car is in neutral with the hand brake applied. Push the choke lever down. Long lever beside the instrument binnacle. Switch on the Battery Isolater switch located under the drivers seat. Turn the main switch under the instrument binnacle to the first position. Place a foot on the throttle and cause the throttle to be open approximately 1/8 of full travel. Press the starter button under the instrument binnacle until the engine starts. Immediately on starting regulate the throttle to give an engine speed of 1,000 to 1,200 rpm. Maintain this speed until the temperature gauge needle lifts off the stop pin. After a short period of around 30 seconds after starting the engine note will change slightly to indicate a rich mixture and the choke can be fully closed. Once the temperature has started to rise the throttle pedal can be released gently to allow the engine to settle into idle speed. Now that the engine is sufficiently warm the car can be driven in the normal way. Warm Starting:- There is now no need to warm the engine at a steady and constant throttle opening as long as there is sufficient heat in the engine and manifold. Ensure the car is in neutral with the hand brake applied. The choke lever is not required for a warm start. Switch on the Battery isolator switch located under the drivers seat. Turn the main switch under the instrument binnacle to the first
3 position. Place a foot on the throttle and cause the throttle to be open approximately 1/8 of full travel. Press the starter button under the instrument binnacle until the engine starts. Immediately on starting release the throttle gently to allow the engine to settle into idle speed. The car can be driven in the normal way. Supercharger:- The car utilises a Sprintex S102 supercharger. This unit requires 50wt hypoid type gear oil. The oil tank for the supercharger is located low on the bulkhead on the passenger side of the car. This is filled from the cap on the top of the bulkhead and the oil level should be at least half way up the sight glass on the tank side and no higher than the top of the sight glass. Take care to ensure the oil lines to the supercharger front gear casing do not get kinked. Oil can be pulled artificially into the gear case by drawing a vacuum for a short time on the supercharger breather pipe, this is the small pipe located inside the oil tank filler. The rear bearings of the supercharger are lubricated by grease as recommended by Sprintex. This is done at higher mileage intervals according to the Sprintex maintenance guidelines. Rear bearing lubrication does require removal of the supercharger. However at these mileages it would be wise to remove the blower for a visual inspection of the rotors. The supercharger is removed by firstly removing the bolts retaining the input shaft extension then by releasing the four bolts holding the supercharger to the rear mounting / manifold base. Do not remove this steel bracket as it forms the rear water space cover of the cylinder block. The exhaust manifold must be removed to gain access to the supercharger. The supercharger drive shaft from the engine runs on sealed for life bearings. These are in pairs and lightly preloaded on assembly and do not require routine maintenance or lubrication. Drive is by two toothed belts and normal tooth belt tension should be applied to these, again maintenance is not normally required. The inlet manifold is heated by engine cooling water and forms the thermostat bypass. This take off is what would normally provide hot water to a car for its passenger compartment heating. This heating is required to prevent carburettor icing and to reduce fuel condensation in the inlet manifold. Radiator and Cooling System:- The main radiator is a traditional hexagonal vintage core mounted in an external shell. If required the radiator can be removed from this shell. The full radiator assembly is
4 first removed from the car (The top suspension wish bones and coil spring dampers should be undone and pulled back to allow the radiator to lift upwards). The core is then removed by unscrewing the filler pipe and removing the bottom studs. An additional return bend cooler is fitted underneath the car on the passenger s side, this provides additional cooling and water volume. A fixed fan is fitted to the engine, there is a temperature gauge in the cockpit, plus a functioning calorimeter on the radiator cap. When filling the radiator use water plus a Non-OATS antifreeze, fill to just above the visible radiator matrix and no further. The radiator is non-pressurised with an overflow pipe, an overfilled radiator will cause water to be ejected from this pipe. There is an anti-surge pot fitted inside the radiator filler neck, this must be in place to prevent turbulence in the top tank causing an excess of water to be ejected from the overflow. The surge pot is lifted out to allow the water level to be checked and topped up. Oil Cooling system:- Two oil coolers are fitted in the oil circuit of the car with a take-off located behind the engines cartridge oil filter. The replica Bugatti oil cooler is located on the left hand side of the chassis and a conventional oil cooler is located centrally and horizontally on the chassis bottom rails between the front wheels. Air is ducted from above and exhausted below. Suspension:- A conventional coil spring and damper arrangement is utilised. The dampers are adjustable for spring tension and damping. The spring tension adjusting rings will not need to be altered, however the small knurled knobs at the bottom of each damper can be altered to adjust the cars handling. At the rear a set of imitation leaf springs are fitted to replicate the appearance of the prototype car. These are resilient mounted to the axle and are free to rotate on pre-loaded ball races at their root. They are not load bearing on the rear axle. Braking system and Clutch:- The braking system is servo assisted hydraulic brakes. The break servo is located on the bulkhead behind the driver s seat and is accessible from underneath the car. The break hydraulic reservoirs are located in front of the driver s foot well under the bonnet. The clutch cylinder is also located here. The foot brake has two cylinders linked by a brake balance bar located in the foot brake pedal. Brake front to rear balance can be adjusted by this balance bar should the need arise. The hand brake is cable operated from the centrally mounted lever on a ratchet. The hand brake cable is not a prestretched cable and as such the hand brake will run full travel on the ratchet in operation. A pre-stretched cable could be fitted should this be required. The prototype car was fully cable braked and imitation cables are fitted to the car to ensure that the correct look is achieved. These cables are non-functional and are lightly tensioned with a spring device on the rear axle to compensate for any suspension movement.
5 Exhaust system:- The exhaust system has a removable muffler insert which pushes into the end of the tail pipe. This muffler is required for any vehicle test inspections and reduces the exhaust noise sufficiently. Overdrive:- An overdrive unit is fitted and operated by a toggle switch on the right hand side of the bulkhead. The overdrive is NOT wired into the lockout switch on the gearbox. This lockout could be incorporated if required and would be wired in series with the overdrive solenoid. The overdrive should only be used in 3rd and top gears only. Battery and Electrical:- The Battery is located under the passenger seat and is accessible by removing the seat squab, two twist tabs under the front edge of the seat. A cover plate is then removed by means of a set of posidrive screws. The battery can be charged through a banana plug located under the passenger seat without the need to remove the seat squab or battery cover. A battery isolator switch is fitted under the driver s seat. There are two rotary switches located under the instrument binnacle, the first one controls the ignition and lights. Position 1, ignition. Position 2 Side Lights. Position 3 Headlights. A separate dip switch is fitted to the bulkhead next to the overdrive switch. A second forward facing rotary switch located under the instrument binnacle controls the indicators, the indicators are not selfcancelling. The final switch under the instrument binnacle is the push button to activate the starter motor. On the right hand side of the instrument binnacle is a push button to operate the horn. The location of the electrical switches is intended to give a clean visual look to the cockpit more in keeping with the prototype vehicle. The ignition coil is fitted on a vertical plate between the front and rear engine bay bulkhead. The fuse board is also located in this area. A Luminition electronic ignition system is fitted. In addition a supercharger ignition retard is fitted, due to the low pressures developed in the supercharger this is not really needed but is fitted as a matter of course. A mechanical speedometer is fitted. This is a new unit and replaces an electronic unit fitted when the car was built. The electronic unit failed at around 2,500 miles. The failed electronic unit is included for mileage verification of the point of change over. Not for the faint of heart or shy retiring types; the car may be viewed by prior appointment at our showrooms. A gallery of large high resolution pictures may be viewed by clicking the "More Pictures" button.
6 Be sure to view image in "Original" format if you wish for a close up view. Menu is to right of picture. Office Richard Biddulph Adi We accept Credit/Debit Cards. Part Exchange welcome. Weekend & evening viewings OK. Viewings by appointment : Prestige House. 9 Globe Industrial Estate, Grays, Essex, RM17 6ST TELEPHONE / ONLINE +44 (0) Richard@vandp.net vintagerollsroycecars.com ADDRESS Vintage & Prestige Prestige House 9 Globe Industrial Estate Grays Essex RM17 6ST Company reg. no: VINTAGE & PRESTIGE CLASSIC CARS LTD
Holley High Performance Intake System* For Port 13B Engines (Includes B 6-Port engines converted to 4-Port)
Holley High Performance Intake System* For 1974-1978 4-Port 13B Engines (Includes 1984-85 13B 6-Port engines converted to 4-Port) Installation Instructions I-18038 Note: These instructions assume: The
More informationINSTALLATION INSTRUCTIONS 97 FORD EXPEDITION
INSTALLATION INSTRUCTIONS 97 FORD EXPEDITION 1. Read the instructions completely and carefully before you begin. Check the kit for proper contents (refer to the part s list and the picture diagrams). Before
More informationSECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED
SECTION 6A1-2 - ENGINE MECHANICAL - V6 SUPERCHARGED CAUTION: This vehicle will be equipped with a Supplemental Restraint System (SRS). A SRS will consist of either seat belt pre-tensioners and a driver
More informationWEBER CARBURETOR TROUBLESHOOTING GUIDE
This guide is to help pinpoint problems by diagnosing engine symptoms associated with specific vehicle operating conditions. The chart will guide you step by step to help correct these problems. For successful
More informationVEHICLE DETAILS ADDITIONAL INFORMATION / SERVICE HISTORY
Vintage & Prestige Classic Cars LTD Prestige House 9 Globe Industrial Estate Grays Essex, RM17 6ST Richard@vandp.net 01375 379 719 2010 BENTLEY CONTINENTAL GTC MULLINER SPEED MODEL BENTLEY CONTINENTAL
More informationDrawing Page Drawing Page
Contents Drawing Page Drawing Page L4 Engine...1 L4 Engine - Exploded View...2 V6 Engine...3 V6 Engine - Exploded View... 4 Oil Filter...5 VTEC (Variable Timing Electronic Control) System... 6 Fuel and
More information1983 BMW 320i. 1.8L 4-CYL 1983 Engines - 1.8L 4-Cylinder Engines - 1.8L 4-Cylinder
ENGINE IDENTIFICATION 1.8L 4-CYL 1983 Engines - 1.8L 4-Cylinder For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES - GENERAL INFORMATION article in the GENERAL INFORMATION
More information26 - COOLING SYSTEM CONTENTS ENGINE COOLING - DESCRIPTION... 3 ENGINE COOLING - OPERATION... 9 COOLING SYSTEM FAULTS... 1
26 - COOLING SYSTEM CONTENTS Page LAND ROVER V8 DESCRIPTION AND OPERATION ENGINE COOLING - DESCRIPTION... 3 ENGINE COOLING - OPERATION... 9 FAULT DIAGNOSIS COOLING SYSTEM FAULTS... 1 REPAIR COOLANT - DRAIN
More informationXRT300 AND XRT350 BA XR6 TURBO UPGRADE KIT FITTING INSTRUCTIONS
XRT300 AND XRT350 BA XR6 TURBO UPGRADE KIT FITTING INSTRUCTIONS The use of NFU (No Further use) and REUSE (Re Use) relates to the individual parts storage when performing the upgrade. Also note that all
More informationDVX 300 Euro. Model Number A2012KSF2BEUK SHARE OUR PASSION.
ATV 2012ATV Illustrated Parts Manual DVX 300 Euro Model Number A2012KSF2BEUK TM SHARE OUR PASSION. TABLE OF CONTENTS 2012 ATV DVX 300 Euro (Model No. A2012KSF2BEUK) BODY PANEL AND HEADLIGHT ASSEMBLY...
More informationAutomobile section, showing different parts in detail. and miscellaneous devices.
SECTION VII Nos. 97 112 Automobile section, showing different parts in detail. and miscellaneous devices. Hydraulic jack MECHANICAL MODELS 43 Section VII 97. Automobile engine starter. This device known
More informationAlways wear safety glasses when working on your vehicle.
90-93 MAZDA MIATA SUPERCHARGER KIT The KraftWerks 90-93 Mazda Miata Supercharger Kit was designed for easy installation. Competent mechanics with the appropriate tools will find the process to be relatively
More informationEXPANSION TANK MUSTANG GT FORD FIESTA ST PARTS LIST AND INSTALLATION GUIDE PARTS LIST AND INSTALLATION GUIDE
PARTS LIST MMHOSE-MUS8-15L: 4 PC SILICONE HOSES 8 PC CLAMPS 1 PC STAINLESS STEEL ADAPTER MMHOSE-MUS8-15U: 1 PC SILICONE HOSE 1 PC QUICK-DISCONNECT FITTING 1 PC CLAMP MMHOSE-MUS8-15ANC: INSTALLATION INSTRUCTIONS
More informationTechnical data. Part Thread (mm) Nm ±10% Tolerance Sidestand
section 3 - Torque settings Frame torque settings Sidestand Stand sensor bolt 5 Pre-applied threadlocker Stand plate fixing screw M10x25 43 Pre-applied threadlocker Side stand fastening pin Side stand
More informationIllustrated Parts Manual. Model Number A2011KSF2BEUZ (Black-Cat Green) A2011KSF2BEOJ (White-Cat Green)
Illustrated Parts Manual 2 1 10 DVX 300 Euro Model Number A2011KSF2BEUZ (Black-Cat Green) A2011KSF2BEOJ (White-Cat Green) S H A R E O U R PAS S IO N. TM TABLE OF CONTENTS 2011 ATV DVX 300 Euro Black-Cat
More informationModified Article Date of Application Date of Publication
2018 CAMS MANUAL OF MOTOR SPORT SPECIFICATIONS OF AUTOMOBILES 5th Category Historic Cars Vehicle Eligibility Historic Specials CONFEDERATION OF AUSTRALIAN MOTOR SPORT WWW.CAMS.COM.AU Modified Article Date
More informationCooling system components, removing and installing
Page 1 of 40 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate
More informationVS403 INSTRUCTIONS FOR: VACUUM AND PRESSURE TEST / BRAKE BLEEDING UNIT MODEL: SAFETY INSTRUCTIONS INTRODUCTION & CONTENTS. fig.1
INSTRUCTIONS FOR: VACUUM AND PRESSURE TEST / BRAKE BLEEDING UNIT MODEL: VS403 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
More informationQT INSTRUCTION MANUAL
QT INSTRUCTION MANUAL PLEASE READ BEFORE USE Distributed by Qpod Motor Company Tel: 01404 850545 Fax: 01404 851110 www.qpod.co.uk Contents Pg 3 Servicing and Warranty Pg 4 Serial Numbers / Vehicle Keys
More informationReplica Motor Company - Pricelist PRODUCT EACH PAIR
- Pricelist PRODUCT EACH PAIR STAGE 1 BODY CHASSIS UNIT s unique space frame chassis with body fitted. Doors boot and bonnet all hinged. $12,750.00 STAGE 2 ROLLING CHASSIS with 12 months warranty. 1. Reconditioned
More informationATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY
2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 1 of 56 AIR INTAKE ASSEMBLY 2011 ATV 300 DVX CAT GREEN (A2011KSF2BUSZ) Page 2 of 56 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-705
More informationCOOLING SYSTEM - V8. Cooling system component layout DESCRIPTION AND OPERATION
Cooling system component layout 26-2-2 DESCRIPTION AND OPERATION 1 Heater matrix 2 Heater return hose 3 Heater inlet hose 4 Heater inlet pipe 5 Throttle housing 6 Connecting hose 7 Throttle housing inlet
More information1983 Mazda RX-7 GSL TUNE-UP' 'Mazda Rotary
TESTING ENGINE COMPRESSION The manufacturer recommends using a special compression tester (49 0820 280K). Compression testers for piston engines will read only the highest pressure of the 3 combustion
More informationELECTRICAL COMPONENT LOCATOR
ELECTRICAL COMPONENT LOCATOR 1988 Toyota Celica 1988 TOYOTA Celica Electrical Components ---------------------------------------------------------------------- BUZZERS, RELAYS & TIMERS ----------------------------------------------------------------------
More informationU.S. COMMUNITIES DISCOUNT SCHEDULE EFFECTIVE THROUGH
BATTERIES BATTERIES BATTERY ACCESSORIES CHARGERS, TERMINALS, CABLES -33% BATTERIES AUTOMOTIVE BATTERIES PREMIUM (PLATINUM) -33% BATTERIES AUTOMOTIVE BATTERIES BEST (GOLD) -33% BATTERIES AUTOMOTIVE BATTERIES
More informationBMW 327 Price list. engine block, crankshaft, bearings, cylinder head
BMW 327 Price list Tafel 1 engine block, crankshaft, bearings, cylinder head engine block : 3 stud for center main bearing cap 9 4 bushing for oil pump drive 36 5 stud for rear main bearing cover 9 6 tab
More informationSUPERCHARGER. ON-VEHICLE INSPECTION 1. INSPECT SUPERCHARGER OIL LEVEL HINT: With the engine cold, check the oil level on the dipstick.
EG45 ONVEHICLE INSPECTION 1. INSPECT OIL LEVEL HINT: With the engine cold, check the oil level on the dipstick. (a) Park the vehicle on a level spot and turn the engine off. (b) 4WD: Remove the LH front
More informationGM LS3 Throttle Body and ECU Kit
OMEX PERFORMANCE ELECTRONICS GM LS3 Throttle Body and ECU Kit An easy to install kit to convert the GM LS3 engine to a cable operated throttle and premapped user programmable ECU suitable for both IVA
More informationTC Series Cooling Systems
TC Series Cooling Systems Table of Contents Table of Contents...1 List of Figures...1 Safety...2 Introduction...2 General Specifications...2 Types of Coolant...2 Routine Maintenance...2 Surge Tank Coolant
More informationMotorcycle parts compatibility on ebay.co.uk
Motorcycle parts compatibility on ebay.co.uk Review the full list of categories and subcategories in which you can list motorcycle and scooter parts. Last updated: 10 August 2016 Motorcycle Parts (10063)
More informationSLP Camaro ZL1 STAGE 3 (650 HP)
SLP - 2012 Camaro ZL1 STAGE 3 (650 HP) PART #26002 PACKING LIST Before installation, use this check list to make sure all necessary parts have been included. ITEM QTY CHECK PART NUMBER DESCRIPTION 1. 1
More informationPOST-REBUILD PREPARATIONS AND START-UP PROCEDURE FOR INDIAN WARRIOR
POST-REBUILD PREPARATIONS AND START-UP PROCEDURE FOR INDIAN WARRIOR This procedure assumes the engine and gearbox are assembled properly and with assembly lube, installed in the bike frame, the electrical
More informationThis information covers the proper procedure for replacing the Volvo D16F engine in a VT or VNL chassis.
Volvo Trucks North America Greensboro, NC USA Engine, Replacement DService Bulletin Trucks Date Group No. Page 10.2007 210 139 1(47) Engine, Replacement Volvo D16F VNL, VT W2005773 This information covers
More informationAudi > B4 > Liter V6 2V Engine Mechanical, Engine Code(s): AAH, AFC 10 Engine Assembly
Audi > B4 > 1993 1995 2.8 Liter V6 2V Engine Mechanical, Engine Code(s): AAH, AFC 10 Engine Assembly Removing The engine is removed from above, after being separated from the transmission. Note: All tie
More informationTypical Install Instructions
Typical Install Instructions Read & understand all steps of these instructions before beginning this installation. WEBER Conversion Kit, VW T-1/2, up to 1835cc 32 / 36 DFEV Weber Carburetor These instructions
More informationVolkswagen New Beetle 1.8 Liter 4-Cyl. 5V Turbo OBD II Engine Mechanical 19 Engine-Cooling system (Page GR-19)
19 Engine-Cooling system (Page GR-19) Cooling system components, removing and installing Continued coolant circulation pump (V51), checking Coolant hose connection diagram Coolant pump, removing and installing
More informationSunbeam Alpine & Tiger Spares
Sunbeam Alpine & Tiger Spares Front Suspension Steering Brake System Cooling System Engine Fuel System Transmission Rear Suspension Chassis Brightwork & Badges Electrical Systems Fittings Interior & Trim
More informationSRT OPERATIONS MANUAL
MAINTENANCE SECTION PAGE # VEHICLE DAILY INSPECTION.......................................1 P.M. INSPECTION #1.................................................3 P.M. INSPECTION #2.................................................6
More informationTriumph Tiger 800. Torque settings. Torque (Nm) Camshaft cover to cylinder head 10 Camshaft drive chain tensioner to head 9
Triumph Tiger 800 Torque settings Cylinder Head Camshaft cover to cylinder head 10 Camshaft drive chain tensioner to head 9 Camshaft bearing ladder to head Camshaft sprocket to camshaft 10 Camshaft drive
More informationZZPerformance.com. Dual Pass Kit install AKA Option A upgrade
ZZPerformance.com ZZ-DUALPIC rev A Dual Pass Kit install AKA Option A upgrade Tools you will need: Flat head screw driver Trim removal tool (H.E. install only, not required) 10mm socket 6mm socket 5/8
More informationALARMS/KEYS/LOCKS A1 ALARM SYSTEM A2 ALARM SYSTEM CONTROL UNIT A3 ALARM SYSTEM REMOTE CONTROL A4 ALARM SYSTEM REMOTE CONTROL BATTERY A5 ALARM/
ALARMS/KEYS/LOCKS A1 ALARM SYSTEM A2 ALARM SYSTEM CONTROL UNIT A3 ALARM SYSTEM REMOTE CONTROL A4 ALARM SYSTEM REMOTE CONTROL BATTERY A5 ALARM/ IMMOBLISER ( AFTER MARKET FITTED) A6 BONNET/ BOOT RELEASE
More informationD-1: FAN COVER. DESCRIPTION 1 Asm., Shroud, Upper
D-: FAN COVER Asm., Shroud, Upper 9639-000 Screw, Tappinmg 9390-305068-00K 3 Clamp 9689-000 Plug, Rubber 96339-000 5 Elbow, Outlet 9650-000 6 Bolt 96000-06058-08C 3 7 Cover Set, Fly Wheel 9609-00 8 Cap
More informationPIERBURG. Carburetor: 2E3
PIERBURG Carburetor: 2E3 1 fast idle adjusting screw 2 throttle lever 3 fuel mixture adjusting screw 4 main body 5 idle cut off valve 6 stop screw 7 accelerator pump cover 8 diaphragm 9 spring 10 valve
More informationAN EXPLANATION OF CIRCUITS CARTER YH HORIZONTAL CLIMATIC CONTROL CARBURETER
AN EXPLANATION OF CIRCUITS CARTER YH HORIZONTAL CLIMATIC CONTROL CARBURETER The Carter Model YH carbureter may be compared with a Carter YF downdraft carbureter with the circuits rearranged to operate
More informationBUZZERS, RELAYS & TIMERS
BUZZERS, RELAYS & TIMERS 1997 MAZDA MX-5 Miata BUZZERS, RELAYS & TIMERS Location A/C Relay In right front of engine compartment, near radiator. See Fig. 1. Condenser Fan Relay In right front of engine
More informationTorque settings Torque settings. Frame torque settings. Note
3 - Torque settings Frame torque settings Part Thread (mm) Nm ±10% Tolerance Side stand Stand sensor screw M6x1 5 LOCK 2 Stand plate fixing screw M10x1.5 43 LOCK 2 Side stand fastening pin M8x1.25 Side
More informationXC 450 EFT Model Number A2013KCK4CETT SHARE OUR PASSION.
2013 XC 450 EFT Model Number A2013KCK4CETT TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 XC 450 EFT Green (Model No. A2013KCK4CETT) FRONT BODY ASSEMBLY... 1 REAR BODY AND TAILLIGHT ASSEMBLY... 2 BUMPER,
More informationCHAIN SAWS G561AVS G621AVS
2626-93121 CHAIN SAWS G561AVS G621AVS APPLICABLE SERIAL NUMBERS: OCTOBER 1998 G561AVS 814608 and up G621AVS 820954 and up Fig.1 1 Fig.2 2 Fig.1 1 1 2616-12112 2618-12115 CYLINDER 1 K4 2 3356-12141 GROMMET
More information2006 Honda Civic SI Supercharger Kit Installation Instruction Kit #
2006 Honda Civic SI Supercharger Kit Installation Instruction Kit #350-091 3239 MONIER CIRCLE, STE.5 RANCHO CORDOVA, CA 95742 916.635.4550 FAX 916.635.4632 www.ct-engineering.com INS-157 VERSION: 3.25.2009
More informationSMF / DSF / DTF SMF / DSF / DTF 200
2006 SMF / DSF / DTF 200 1 The drawings in this parts book have been scaled so that parts can be easily recognized. 1 CYLINDER ASSY 2 CYLINDER ASSY Ref # Part # Description 1 410 0001A CYLINDER HEAD COVER
More information1991 TOYOTA Electrical Components MR2. evaporator. compartment. ARTICLE BEGINNING BUZZERS, RELAYS & TIMERS
ELECTRICAL COMPONENT LOCATOR Article Text ARTICLE BEGINNING 1991 TOYOTA Electrical Components MR2 BUZZERS, RELAYS & TIMERS A/C Compressor Clutch Relay Under right side of dash, on evaporator. Circuit Opening
More informationPage 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
More informationLEXUS EXTRA CARE GOLD. VEHICLE SERVICE AGREEMENT offered by LEXUS FINANCIAL SERVICES
LEXUS EXTRA CARE GOLD VEHICLE SERVICE AGREEMENT offered by LEXUS FINANCIAL SERVICES DRIVE WITH CONFIDENCE KNOWING YOU ARE PROTECTED BY LEXUS EXTRA CARE. Lexus Extra Care, designed with you in mind. Let
More informationVolvo S40 (-2004) V40
Catalog Contents Filters Air filter 8 Oil filter 9 Filter, Interior air 11 Fuel filter 12 Brakes Disc Brake Brake disc 14 Brake pad set 17 Splash panel, Brake disc 19 Handbrake Cable, Park brake 20 Brake
More informationCooling system components, removing and installing
19-1 Cooling system components, removing and installing Note: When the engine is warm the cooling system is under pressure. If necessary release pressure before starting repair work. Hoses are secured
More informationG5200. Fig.1 POWER UNIT
CHAIN SAW 5200 Fig.1 POWER UNIT Fig.1 POWER UNIT Key# PART NUMBER DESCRIPTION NOTE 1 2880-12111 Cylinder 1 ø45 2 2880-14111 Inlet Pipe 1 3 2880-14120 Spring 5 2880-14150 Inner Guide 1 6 2670-14311 Bracket
More informationSupercharged MK1 MR2 Part Diagrams
Supercharged MK1 MR2 Part Diagrams Created by: Charles K. (ckowalc) 1 Table of Contents PART DIAGRAM PAGE ACCELERATOR LINK 9 AIR CLEANER 10 AIR CLEANER 4AGZE 11 ALTERNATOR 4AGZE 12 ANTENNA 13 ARMREST &
More informationAudi A4 Current Flow Diagram No. 44 / 1 Edition
Page 1 of 16 Audi A4 Current Flow Diagram No. 44 / 1 Edition 05.2003 1.8 l - Fuel injection engine (110 kw - Motronic - 4 cylinder), engine code AVJ from model year 2002 1.8 l - Fuel injection engine (120
More informationMG RV8 Maintenance Schedule
Action required at 6, 12 & 24 months page 6 12 24 3 Check engine & transmission Check for oil leaks from engine, gearbox & rear axle 3 Engine oil & filter Check oil level & top up Every 12 months or 20,000km
More information5TH CATEGORY - HISTORIC RACING. GROUP Sb APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Sb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
More informationX4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
More informationMAINTENANCE SXV / RXV
MAINTENANCE SXV / RXV 450-550 3.1.12. HANDLEBAR AND CONTROLS Screw securing clutch control to handlebar M6 10 Throttle control screw M6 4 Ignition switch screw M8 24 FOOTRESTS Footrest support bracket
More informationSPARE PARTS SMC JUMBO 700. WBC d.o.o., Sticna 127, 1295 Ivancna Gorica, Slovenia-Europe WEB PAGE:
SPARE PARTS SMC JUMBO 700 WBC d.o.o., Sticna 127, 1295 Ivancna Gorica, Slovenia-Europe WEB PAGE: www.atv.si, www.atv-quad.si CYLINDER CYLINDER 1 11111-MAX-00 CYLINDER COMP 2 11121-MAX-00 HEAD COMP, CYLINDER
More informationSECTION A Engine Cooling
303-03A-i Engine Cooling 303-03A-i SECTION 303-03A Engine Cooling CONTENTS PAGE DESCRIPTION AND OPERATION Engine Cooling... 303-03A-2 Coolant Flow Diagram... 303-03A-3 303-03A-2 Engine Cooling 303-03A-2
More information2004 Volvo C70 L5-2.4L Turbo VIN 63 B5244T7 Cylinder Head Assembly Service and Repair, Removal and Replacement: Cylinder Head/Gasket, Replacing
1 of 25 8/18/2011 6:10 PM 2004 Volvo C70 L5-2.4L Turbo VIN 63 B5244T7 Cylinder Head Assembly Service and Repair, Removal and Replacement: Cylinder Head/Gasket, Replacing Cylinder head/gasket, replacement
More informationAcura Plus Comprehensive & Major Component Coverage
Acura Plus Comprehensive & Major Component Coverage ENGINE Cylinder block and all internal parts Cylinder heads and all internal parts Engine mounts Engine seals and gaskets Flywheel Intake and exhaust
More information1963 GEN IV SUREFIT VINTAGE AIR CONDITIONING INSTALLATION
by Randy Irwin 1963 GEN IV SUREFIT VINTAGE AIR CONDITIONING INSTALLATION Randy Irwin - Technical Writer Randy has been involved in the Chevy parts business for over 30 years. He is a wizard at creating,
More informationHillman Minx Maintenance Schedule
Hillman Minx Maintenance Schedule The maintenance schedule for most Series Minxes can be found as a large fold-out sheet, pasted inside the back cover of the Owner's Handbook. Series V and VI have a much
More informationHOFFMANN POWER PRODUCTS PARTS LIST 2014
HOFFMANN POWER PRODUCTS PARTS LIST 2014 HOFFMANN CHAINSAW PN7200 ALL PARTS ARE SUBJECT TO STANDARD HOFFMANN TERMS AND CONDITIONS OF SALE 2010 Replacement parts are not manufactured, sold or warranted by
More informationWARNING: the engine does not come with oil in it. Please fill the oil before starting. The 200cc hardknock requires 9/10 of a quart of oil.
WARNING: the engine does not come with oil in it. Please fill the oil before starting. The 200cc hardknock requires 9/10 of a quart of oil. Things needed for assembly. -2 tubes of blue loc-tite. I don
More informationPosition of Parts in Engine Compartment
ELECTRICAL WIRING ROUTING [5S FE] Position of Parts in Engine Compartment A 1 A/C Condenser Fan Motor E 4 Engine Coolant Temp. Sensor (EFI Water Temp. A 2 A/C Magnetic Clutch and Lock Sensor Sensor) A
More information16A. STARTING - CHARGING Starter: Removal - Refitting REFITTING 16A-11 K4M II - REMOVAL OPERATION III - FINAL OPERATION
STARTING - CHARGING Starter: Removal - Refitting 16A K4M II - REMOVAL OPERATION III - FINAL OPERATION JR5 a Clip: -the gearbox control cable sleeve stops on the gearbox, - the control cables onto the gearbox.
More informationSuper 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber
Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover
More informationReplacing the camshaft seals / variable valve timing (VVT) unit
"VCC097794 EN 20100918" 1(10) Replacing the camshaft seals / variable valve timing (VVT) unit Special tools: 951 2050, 999 5450, 999 5451, 999 5452, 999 5651, 999 5718, 999 5719, 999 5919 Note! As the
More informationINSTRUCTIONS FOR: VACUUM TESTER AND BRAKE BLEEDING KIT
INSTRUCTIONS FOR: VACUUM TESTER AND BRAKE BLEEDING KIT MODEL: VS402 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
More information400 2x4/4x4 EFT SHARE OUR PASSION ṬM
SHARE OUR PASSION ṬM 400 2x4/4x4 EFT Model Number A2009IDG2BETR (Red - 2x4) Model Number A2009IDG2BETZ (Cat Green - 2x4) Model Number A2009IDG4BETR (Red - 4x4) Model Number A2009IDG4BETG (Green - 4x4)
More informationEngine Removal/Installation
Engine Removal/Installation Make sure jacks and safety stands are placed properly and hoist brackets are attached to correct positions on the engine. (See Section 1). Apply parking brake and block rear
More informationParts Diagrams RR/RS Models
Parts Diagrams 2008-2009 RR/RS Models Table Of Contents Description Page # front fork 1 handlebar, clutch pump, meter (RR Models) 2 handlebar, clutch pump, meter (RS Models) 3 frame, subframe 4 rear shock,
More informationSTANDARD TORQUE VALUES ENGINE & FRAME TORQUE VALUES. P-, i 1-13 I GENERAL INFORMATION ENGINE
STANDARD VALUES GENERAL INFORMATION FASTENER TYPE mm bolt and nut mm bolt and nut mm bolt and nut 0 mm bolt and nut mm bolt and nut. (0.,.) 0 (.0, 7) (.,) (., ) (., ) FASTENER TYPE mm screw mm screw mm
More informationIllustrated Parts Manual
1 10 Illustrated Parts Manual 2 425 CR EFT Model Number A2011IRK4CETR (Red) S H A R E O U R PA S S IO N. TM TABLE OF CONTENTS 2011 ATV 425 CR EFT Red (A2011IRK4CETR) FRONT RACK, BODY PANEL, AND HEADLIGHT
More informationPARTS CATALOGUE. Rockford Motors inc.
PARTS CATALOGUE Rockford Motors inc. INSTRUCTIONS FOR USING THE PARTS CATALOGUE 1. This catalogue covers all the items of genuine parts and tools of BRIDGESTONE 350 GTR and 350 GTO motorcycles. 2. Please
More informationSECTION 4 - FUEL SYSTEMS AND CARBURETION
SECTION - FUEL SYSTEMS AND CARBURETION FUEL SYSTEMS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -62 FUEL PUMP - - - - - - -
More information13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor
13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 2 of 31 Carburetor TC-640330 1 S Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640035 1 Throttle Shaft & Lever Assembly
More informationFord Racing Performance Improvement Intake Manifold (96-04 GT) Time Necessary: Approximately 4 hours
Ford Racing Performance Improvement Intake Manifold (96-04 GT) Time Necessary: Approximately 4 hours Tools Required: Ratchet and socket set Torque wrench Large adjustable wrench Needle nose pliers A dozen
More informationReplacing the camshaft seals / variable valve timing (VVT) unit
"VCC097794 EN 20110521" 1(10) Replacing the camshaft seals / variable valve timing (VVT) unit Special tools: 951 2050, 999 5450, 999 5451, 999 5452, 999 5651, 999 5718, 999 5719, 999 5919 Note! As the
More information2019 TECHNICAL REGULATIONS FOR THE HISTORIC PRODUCTION CAR GROUP 1 SALOON CARS (161684/144)
2019 TECHNICAL REGULATIONS FOR THE HISTORIC PRODUCTION CAR GROUP 1 SALOON CARS (161684/144) Permissions: With the exception of the under mentioned allowance, no other additions or modifications whatsoever
More information2009 Yamaha FZ6R OWNER S MANUAL
2009 Yamaha FZ6R OWNER S MANUAL 2 Table of Contents Get to Know Your Motorcycle... 3 Front View... 3 Right Side View... 4 Left Side View... 5 Rear View... 6 Right Handlebar... 7 Left Handlebar... 8 Dashboard...
More information1997 Volvo 850 GLT. Fig. 2: Removing Drive Shaft, Engine Mount Bolt & Torque Arm (5-Cylinder) Courtesy of VOLVO CARS OF NORTH AMERICA.
Fig. 2: Removing Drive Shaft, Engine Mount Bolt & Torque Arm (5-Cylinder) 4. Remove front exhaust pipe nuts and springs. Remove front exhaust pipe bolts. Disconnect speedometer. Remove engine mounting
More informationD-1:CYLINDER HEAD. DESCRIPTION C 4 2 Cover, Cylinder Head 3 Gasket 4 Breather, Crankcase, Lower A
CROSSLAND 300 D-1:CYLINDER HEAD 1 Bolt 96000-060258-08C 4 2 Cover, Cylinder Head 1230950A-000 1 3 Gasket 1230350A-000 1 4 Breather, Crankcase, Lower 1230250A-000 1 5 Screw 93903-1040088-00K 4 6 Gasket,
More informationGear change & shift cables Gearchange balljoints and bushes. Globes 12 and 24 volt Grilles
A Accessories Air Bags Air compressor assembly and components Air conditioner idler pulleys and condensers Air dryer assemblies and repair kits Air filter elements Air master assembly and repair kits Air
More informationEngine Does Not Start or Is Hard to Start Cause of Trouble. 1. Open the drain screw, and check Fuel not supplied (1) Fuel tank empty
20. Engine Does Not Start or Is Hard to Start 20-1 Engine Output Insufficient 20-2 Poor Performance at Low Speed and Idling 20-3 Poor Performance at High Speed 20-3 Unsatisfactory Operation 20-4 Fuel Gauge
More informationTorque Guidelines (Z 22 SE)
Page 1 of 14 Torque Guidelines (Z 22 SE) No. Designation Nm 1 Retaining bolts, coolant pump sprocket to coolant pump 2 Retaining bolts, balancer shaft timing chain guide rail to 3 Retaining bolts, balancer
More informationAPPRENTICE TECHNICIAN PROGRESS LOG
APPRENTICE TECHNICIAN PROGRESS LOG APPRENTICE INRUCTIONS: At the end of each day track your progress on the attached log by including work order number and date next to each new skill you perform. Have
More informationPARTIAL ENGINE ASSY COMPONENTS. Clip. Radiator Grille. Clip. Front Bumper Cover. Engine Under Cover LH. N m (kgf cm, ft lbf) : Specified torque
ENGINE MECHANICAL 1417 COMPONENTS 141FP01 Radiator Grille Front Bumper Cover Engine Under Cover RH Engine Under Cover LH A79361 962 1418 ENGINE MECHANICAL Heater Outlet Water Hose 7.0 (71, 62 in. lbf)
More informationrev 1_09/20/2017 PS-35C EA3500SR
C 1 Tank, Handle 5 7 6 8 17 9 1 2 10 11 12 13 18 19 20 3 21 4 22 23 14 16 2 1 Tank, Handle 1 1 168507-3 TANK CAP COMPLETE 1 1 INC. 2 1 2 213080-9 O RING 29.5 1 1 1 3 163447-0 GASOLINE FILTER 1 1 1 4 195757-7
More information5. FUEL SYSTEM 5-0 FUEL SYSTEM MXU 250R/300R
5 FUEL SYSTEM 5 SERVICE INFORMATION------------------------------------------------ 5-2 TROUBLESHOOTING----------------------------------------------------- 5-3 FUEL TANK -----------------------------------------------------------------
More informationSpecialist Components. SPi 5 Port EFI Kit
Specialist Components SPi 5 Port EFI Kit Version 1.1 Sept 2012 Congratulations on the purchase of your SPi 5 port EFI Kit! Kit Content:- Alloy inlet manifold gasflowed to suit 45/50mm throttle body Injector
More informationMGA Gearbox Conversion Kit. Fitting Instructions
MGA Gearbox Conversion Kit Fitting Instructions KIT CONTENTS Mazda MX-5 5 Speed Transmission: Vitesse Gearbox Case Vitesse Bellhousing Vitesse Machined Front Plate Modified rear case to accept Mazda mechanical
More informationJEEP WRANGLER (TJ), UNLIMITED (TJL), RUBICON MODELS BODY LIFT KIT INSTALLATION INSTRUCTIONS KIT# KIT# 973
JEEP WRANGLER (TJ), UNLIMITED (TJL), RUBICON MODELS BODY LIFT KIT INSTALLATION INSTRUCTIONS 1997-2006 2 KIT# 972 3 KIT# 973 WARNING Installation of a Performance Automotive Group body lift will change
More information