C/SSC. FLUID COOLING Shell & Tube C & SSC Series. Features. Materials SSC Series. Ratings Standard. Materials C Series.
|
|
|
- Felix Terry
- 5 years ago
- Views:
Transcription
1 FLUID COOLING Shell & Tube Series COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel Construction Low Cost Type 316 Stainless Steel Construction Optional Custom Designs Available Competitively Priced Optional Material Construction on C-Series: Tubes, Tubesheets, End Bonnets NPT, SAE O-Ring, SAE Flange, or BSPP Shell Side Connections Available End Bonnets Removable for Servicing Mounting Feet Included (May be rotated in 90 increments) Ratings Standard Maximum Shell Pressure 300 psi Maximum Tube Side Pressure 150 psi Maximum Temperature 300 F Ratings ASME Code Maximum Shell Pressure 300 psi Maximum Tube Side Pressure 150 psi ASME Code SSC psi Maximum Temperature 300 F C/SSC Materials C Series Tubes Copper Headers Steel Shell Steel Shell Connections Steel Baff les Brass End Bonnets Cast Iron Mounting Brackets Steel Gaskets Nitrile Rubber/Cellulose Fiber Nameplate Aluminum Foil Materials SSC Series Tubes 316 Stainless Steel Tubesheets 316 L Stainless Steel Shell 316 L Stainless Steel Shell Connections 316 L Stainless Steel Baff les 316 Stainless Steel End Bonnets 316 Stainless Steel Mounting Brackets Mild Steel Gaskets Nitrile Rubber/Cellulose Fiber Nameplate Aluminum Foil
2 Dimensions One Pass All Models except C-600 Series C-600 Series Flange Size GG HH Z - CF Z - CFM /8-16 UNC M /2-13 UNC M /8-11 UNC M-16 NOTE: We reserve the right to make reasonable design changes without notice. Consult factory. All dimensions are inches. TTPSales@thermasys.com
3 Dimensions Two Pass C-600, C-1000, C-1700 Series C-800, C-1200 Series Flange Size GG HH Z - CF Z - CFM /8-16 UNC M /2-13 UNC M /8-11 UNC M-16 NOTE: We reserve the right to make reasonable design changes without notice. Consult factory. All dimensions are inches. 92 TTPSales@thermasys.com
4 Dimensions Four Pass All Models except C-1700 Series C-1700 Series Flange Size GG HH Z - CF Z - CFM /8-16 UNC M /2-13 UNC M /8-11 UNC M-16 NOTE: We reserve the right to make reasonable design changes without notice. Consult factory. All dimensions are inches. TTPSales@thermasys.com
5 Performance Curves Ship Wt. Model (lbs) 1. C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F C/SSC F 300 * Shipping Weights are approximate 94 TTPSales@thermasys.com
6 Selection Procedure Performance Curves are based on 100SSU oil leaving the cooler 40 F higher than the incoming water temperature (40 F approach temperature). Curves are based on a 2:1 oil to water ratio. Step 1 Step 2 Step 3 Step 4 Step 5 Determine the Heat Load. This will vary with different systems, but typically coolers are sized to remove 25 to 50% of the input nameplate horsepower. (Example: 100 HP Power Unit x.33 = 33 HP Heat load.) If BTU/Hr. is known: HP = BTU/Hr 2545 Determine Approach Temperature. Desired oil leaving cooler F Water Inlet temp. F = Actual Approach Determine Curve Horsepower Heat Load. Enter the information from above: HP heat load x 40 x Viscosity = Curve Actual Approach Correction A Horsepower Enter curves at oil flow through cooler and curve horsepower. Any curve above the intersecting point will work. Determine Oil Pressure Drop from Curves. Multiply pressure drop from curve by correction factor B found on oil viscosity correction curve. = 5 PSI; = 10 PSI; = 20 PSI; = 40 PSI. Oil Temperature Oil coolers can be selected by using entering or leaving oil tempertures. Typical operating temperature ranges are: Hydraulic Motor Oil 110 F F Hydrostatic Drive Oil 130 F F Lube Oil Circuits 110 F F Automatic Transmission Fluid 200 F F Desired Reservoir Temperature Return Line Cooling: Desired temperature is the oil temperature leaving the cooler. This will be the same temperature that will be found in the reservoir. Off-Line Recirculation Cooling Loop: Desired temperature is the temperature entering the cooler. In this case, the oil temperature change must be determined so that the actual oil leaving temperature can be found. Calculate the oil temperature change (Oil T) with this formula: Oil T=(BTU s/hr.)/gpm Oil Flow x 210). To calculate the oil leaving temperature from the cooler, use this formula: Oil Leaving Temperature = Oil Entering Temperature - Oil T. This formula may also be used in any application where the only temperature available is the entering oil temperature. Oil Pressure Drop: Most systems can tolerate a pressure drop through the heat exchanger of 20 to 30 PSI. Excessive pressure drop should be avoided. Care should be taken to limit pressure drop to 5 PSI or less for case drain applications where high back pressure may damage the pump shaft seals. Maximum Flow Rates Example Model No. C/SSC F Unit Baff le Shell Side Tube Side (GPM) Size Spacing (GPM) O T F , 3 19, , 4 32, , 5 41, , 6 60, , , Exceptions to Maximum Shell Side Flows C/SSC * 63 GPM Max. C/SSC * 33 GPM Max. C/SSC * 66 GPM Max. C/SSC * 105 GPM Max. C/SSC * 200 GPM Max. Caution: Incorrect installation can cause this product to fail prematurely, causing the shell side and tube side fluids to intermix. Piping Hook-up Specific applications may have different piping arrangements. Contact factory for assistance. C/SSC
OR STAINLESS STEEL CONSTRUCTION
FLUID COOLING Shell & Tube Series 92 COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
FLUID COOLING Shell & Tube B Series
FLUID COOLING Shell & Tube Series WATER COOLED COPPER & STEEL CONSTRUCTION Features Young Touchstone Interchange Optional Non-Ferrous Construction Competitively Priced 1/4 or 3/8 Tubes Standard Water to
FLUID COOLING Shell & Tube EK Series
FLUID COOLING Shell & Tube Series COPPER & STEEL CONSTRUCTION Features Compact Size High Efficiency Finned Bundle Design Low Cost Optional Patented Built-in Surge-Cushion Relief Bypass 3/16 Tube Size Heat
Fluid Cooling Shell & Tube B / SB Series
Fluid ooling Shell & Tube / S Series 0916 erformance Notes Young Touchstone thermal interchange ompetitively priced 1/4" or 3/8" tubes available Water to water applications Sea water applications, O-Ring,
Fluid Cooling Mobile AOHM / AOVHM Series
Fluid Cooling Mobile Series 0916 Performance Notes AO/AOVH Series with hydraulic motor Adjustable louvers (manual) High heat removal Heavy duty construction Wide flow range Heat removal up to 210,000 BTU/HR
Fluid Cooling Brazed Plate BPSW Series
Fluid Cooling Brazed Plate BPSW Series 0916 STAINLESS STEEL CONSTRUCTION Performance Notes Short lead time Stacked plate Stainless steel Copper brazed (nickel option) Oil to water applications High performance
Fluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
A global leader in manufacturing highly engineered heat transfer technologies
OCA SERIES A global leader in manufacturing highly engineered heat transfer technologies Brazed Aluminum Oil Coolers Thermal Transfer Products introduces a new line of high performance oil coolers featuring
AOHM. Fluid Cooling Mobile AOHM & AOVHM Series. How to Order. Features. Materials. Ratings
Fluid Coolig Mobile & AOVHM Series Features AO/AOVH Series with Hydraulic Motor Adjustable Louvers High Heat Removal Heavy Duty Costructio Wide Flow Rage Heat Removal up to 210,000 BTU/Hr. Log Life Hydraulic
Oil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance
DC/DCS Oil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance All DC/DCS and Dual Fan models available with internal pressure bypass DC Motor Driven Cooling Fans Are A Low Cost Solution
FLUID COOLING Shell & Tube A Series
FUID OOING Shell & Tube Series opper & Steel ostructio Features itt Iterchage or Series is Recommeded for New pplicatios ompetitively riced Optioal No-Ferrous ostructio (Water-to-Water Service) Optioal
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
P-BarSeries BOL AOL. We COOL what you POWER. Plate & Bar Aluminum. Standard. Air-Oil Coolers. Standard. Models. Now featuring Brushless DC Fans
2014 Plate & Bar Aluminum Standard Air-Oil Coolers P-BarSeries We COOL what you POWER thermaltransfer.com Standard Models MA Now featuring Brushless DC Fans BOL Now featuring two relief bypass options
Fluid Cooling Shell & Tube B Series
Fluid oolig Shell & Tube Series WTE OOED opper & Steel ostructio Features Youg Touchstoe Iterchage (Thermal) optioal No-Ferrous ostructio ompetitively Priced 1/4 or 3/8 Tubes Stadard Water to Water pplicatios
M S (both ends) DIA x (3) .62 x.88
FUI COOIG hell & ube C & C eries WAE COOE C & C Copper/teel or stailess steel Costructio Features AI/ACO Iterchage AE Code Optio preferred for ew Oil-Water Applicatios C-eries / C eries rugged teel Costructio
Fluid Cooling Industrial & Mobile OCA Series
Fluid Cooling Industrial & Mobile OCA Series 0916 Performance Notes Young Radiator OCS interchange (approximate) American Industrial AOCS interchange (approximate) High efficiency, light weight, low fouling
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer
Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
D/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
BASCO TYPE OP (AEW) HEAT EXCHANGERS
BASCO TYPE OP (AEW) HEAT EXCHANGERS...world leaders in heat transfer technology Standard Heat Exchanger Designs Deliver Cost Effective Performance First introduced in 1962, the Basco OP design has proven
HYDRAULIC MOTOR FAN DRIVEN PRODUCTS
HYDRAULIC MOTOR FAN DRIVEN PRODUCTS HEAT EXCHANGERS K & KBV SERIES HEAT-EXCHANGERS HPV SERIES I HPV Series II www.emmegiinc.com EMMEGI Heat Exchanger Features HEAT-EXCHANGERS 2 Bar & Plate Technology www.emmegiinc.com
12 volt & 24 volt DC motor
www.aihti.com LP & LPR SERIES LP - LP - LP - MOILE IR COOLED LIQUID COOLERS 12 volt & 24 volt DC motor Mobile design. Operating temperature of F and pressure of PSI. Cools: Fluid power systems, lubrication
STOCK PRODUCTS CATALOGUE
STOCK PRODUCTS CATALOGUE DESIGN MANUFACTURE MAINTENANCE OF HEAT TRANSFER EQUIPMENT A Heat Exchangers - Oil Coolers - HEX HEX a heat exchanger for cooling oil with water. This section contains stock heat
HD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
D/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
AP50 MANUAL AND PARTS LIST VERSA-MATIC PUMP. Service / Maintenance Log SUBMERSIBLE CENTRIFUGAL PUMP. Contact Information. Date Details Completed
Service / Maintenance Log Date Details Completed MANUAL AND PARTS LIST AP50 SUBMERSIBLE CENTRIFUGAL PUMP Contact Contact Information Phone / Fax No. DISTRIBUTOR VERSA-MATIC PUMP A Unit of IDEX Corporation
Coolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
Temperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
High Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.
HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304
H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
Submerged Heating Coil
Submerged Heating Coil Cemline Submerged Heating Coils For use in: Domestic Water Heaters and Steam Generators STONESTEEL is a registered trademark of Cemline Corporation CEMLINE CORPORATION P.O. BOX 55
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
High Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
HIGH PRESSURE FILTERS
HIGH PRESSURE FILTERS Series DF & LF Pressures to 6 PSI Flows to 18 GPM APPLICATION HYDAC DF & LF In-line High Pressure Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors
High Pressure Gear Pumps & Motors Series PZG Pumps Series MZG Motors Bulletin 650-Z1 High Pressure Gear Pumps and Gear Motors for today s demanding mobile and industrial applications. The PZG and MZG Series
VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS
Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,
HMK05/25 DURAMAX Spin-Ons
100 gpm, 378 lpm /5 DURAMAX Spin-Ons Working Pressures to: Rated Static Burst to: 350 psi 413 kpa 4.1 bar 800 psi 550 kpa 55. bar Flow Range to: 50 gpm 100 gpm 189 lpm 378 lpm Features (single) and (double)
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified
Cash Valve B SERIES REGULATORS ISSUED - JANUARY 1999 CAVMC-09-US-0208 ISO 9001 Certified GENERAL INFORMATION / REGULATORS B SERIES VALVES DESCRIPTION The Cash Valve Series B pressure reducing and regulating
an ISO 9001 Company Bulletin BCPF 100 NEW Design 70 PLUG FANS CHICAGO BLOWER CORPORATION GLENDALE HEIGHTS, ILLINOIS USA
an ISO 9001 Company Bulletin BCPF 100 NEW Design 70 PLUG FANS New Energy Saving Wheel Mounted Motors to 125 HP Pre-Engineered Sizes to 60" Capacities to 156,000 CFM CHICAGO BLOWER CORPORATION GLENDALE
GLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 009 (changes and errors expected) Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG
SERIES. Dirty Environment Oil Coolers ACD
ACD Dirty Environment Oil Coolers SERIES Low Fouling Series with Non-Louvered Fin Design Standard s with Higher Speed Fans for Compact, Most Economical Selection Low Noise s with Slower Fan Speeds for
High Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
Temperature Regulator I-1285-B through G Series (Bronze Valve Body)
Sales Manual Section 35 PRODUCT SPECIFICATION I-285-B, C, D, E, F, G GENERAL DESCRIPTION GENERAL DESCRIPTION The I-285-B through G Series Temperature Regulators are compact, self-contained and self-powered,
Hydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2661-CD/US zp2 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference Only
BASCO PIPELINE AFTERCOOLERS. ...world leaders in heat transfer technology
BASCO PIPELINE AFTERCOOLERS...world leaders in heat transfer technology Basco Pipeline Aftercoolers (PLAC) The Basco PLAC and PLAC II aftercooler and companion separator provide an ideal combination to
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
3:1 MOBILE LUBE PACKAGES (55 gal)
3:1 MOBILE LUBE PACKAGES (55 gal) Dolly-mounted oil dispenser kits with digital metered valve and 3:1 pumps. Available with or without hose reel. The ideal combinations for dispensing oil in any workplace.
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
BSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
Low Profile J Series Power Unit with Vane Pump
Low Profile J Series Power Unit with Vane Pump READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING
Shell & Tube Heat Exchangers
Shell & Tube Heat Exchangers Pre-Engineered Series: BCF/SSCF/SX2000/B300 PrOdUC Shell & Tube Heat Exchangers As the recognized leader in heat exchanger products, systems and technology, Standard Xchange
Moduflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
BSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
Electronic Control Valves
MODEL 131 Series (Full Internal Port) 631 Series (Reduced Internal Port) Electronic Control Valves Model 131-01/631-01 Simple Proven Design Quality Solenoid Pilot Controls Ideal For SCADA Systems Multi-Function
AH / AV. Advanced Series Unit Heaters AH / AV. Ruffneck
The Ruffneck Advanced Series heaters are designed for rugged industrial applications and are available in 37 models from 6,000 to 1,,000 Btu/hr With a maximum operating pressure and temperature rating
THERMAL SYSTEMS, INC.
C Oil Coolers SERIES World Class Advanced Technology Design Rugged Bar and Plate Construction Protects Against Fin Damage Competitive Pricing, Deliveries From Stock Leak Free SAE O-Ring Oil Connections,
BGT Series. Low Pressure Filters
Low Pressure Filters 60 Applications - Flows to 640 GPM - 3 Micron Absolute to 120 Micron Absolute - Disposable or Recleanable Elements - Visual and Electrical Indicators - Microglass elements - Magnetic
SV418 Series Bronze Safety Valves ASME Section VIII - NB Certified for Air, Gas, Steam, and Liquid
Safety SV418 Series Bronze Safety Description Spirax Sarco's SV418 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety
12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
MagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
Application & Reference Data Typical Specifications. Section 914 Vertical Turbine Fire Pump
Section 914 Page 101 Supersedes Section 913 Page 101 Dated November 1, 199p Application & Reference Data Typical Specifications Section 914 Section 914 Page 102 Supersedes Section 913 Page 102 Dated November
AGS/MPN Series. Medium Pressure Filters. Global Filtration Technology
Medium Pressure Filters Global Filtration Technology 63 Features/Applications for Medium Pressure Inline Filters AGS Series Rated Working Pressure 1000 PSI Rated Static Pressure 1500 PSI Flows to 25 GPM
Catalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
VIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
SRH2. Steam Rig Heater. Industrial Grade Heat-Exchanger Unit Heaters. CRN: 0H C 150 psig (1034 KPa)
SRH2 EAC Ex models available. Contact factory! Steam Rig Heater CRN: 0H14931.2C 150 psig (1034 KPa) Industrial Grade Heat-Exchanger Unit Heaters www.hazlocheaters.com is a manufacturer of industrial-grade
Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
VISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
UNIVERSL PRODUCT LINE: SERIES 724, 4724 Section 1706 Page 1706.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Cutaway View & Pump Features...2 Model Number Key...3 Standard Materials of Construction...3
Catalog Power Unit Accessories
Catalog Power Unit Accessories Features Continental Hydraulics offers a wide range of accessories that can be either mounted on the power unit, or purchased seperately. Everything from filters and gauges
F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
Pressure Control Valves. General Description. Specifications. Ordering Information
Catalog HY14-3000/US Technical Information Control Valves Series RCP General escription Series RCP in-line pressure control valves are chiefly used as remote control valves. They limit system pressure
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
Catalog Power Unit Accessories
Catalog Power Unit Accessories Features Continental Hydraulics offers a wide range of accessories that can be either mounted on the power unit, or purchased seperately. Everything from filters and gauges
ER TRANSIT PARTS MANUAL. Cooling Section. Page 7-1. Cooling 05/97
Cooling Page 7-1 Plumbing Cummins 6BTA/6BG Page 7-2 Cooling Plumbing Cummins 6BTA/6BG 1 62190751 1 Tube - Coolant, Lower Radiator 2 61190162 3 Clamp - 2 1/16" - 3" 3 61190422 1 Hose - Rubber, Curved 2
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE
6SC SERIES MODELS 910F, 910FLW, 920F IRON SWING CHECK VALVE INSTALLATION OPERATION MAINTENANCE GUIDE DOCUMENT NO.: ES-1495 REVISION LEVEL: A ISSUED BY: Bill Hooks DATE: 09/25/13 APPROVED BY: DATE: APOLLO