KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
|
|
|
- Beverley Beasley
- 6 years ago
- Views:
Transcription
1 Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy inspection and servicing without disconnecting piping. Available with optional female NPT inlet or flanged inlet and outlet connections. Beveled seats lapped for optimum performance. Stainless steel spring for optimum corrosion resistance. Spherical pivot between disc and spring corrects misalignment and compensates for spring side thrust. Tested and inspected for pressure setting and leakage. GENERAL APPLICATION A range of valves suitable for overpressure relief and protection of pumps, tanks, lines and hydraulic systems; pressure regulation and continuous by-pass relief. TECHNICAL DATA Connections: Threaded NPT or flanged Temperature range: -60 to 406 F (-51 to 208 C) Pressure range [1] : 1 to 500 psig (.07 to 20.7 barg) NOTE 1. See page 5 for specifications table Pentair plc. All Rights Reserved. VCTDS EN 16/04
2 MODELS OVERVIEW Model 19: all bronze, equipped with handwheel for easy adjustment within spring ranges. Model 19M: as model 19 except SS trim (seat and disc). Available in 2½ and 3" only. For higher pressure settings or severe applications. Model 20: all bronze, with pressure-tight cap. Suitable for maximum back pressure of 50 psig (3.45 barg). [1] Model 20M: as model 20 except SS trim (seat and disc). Available in 2½ and 3" only. For higher pressure settings or severe applications. Maximum back pressure of 50 psig (3.45 barg). [1] Model 20P: as model 20 except with packed lift lever. Suitable for maximum back pressure of 50 psig (3.45 barg). [1] OPTIONS Available with optional female NPT inlet or flanged inlet and outlet connections. Model 19 Variation 10: 5 to 75 psig (.34 to 5.17 barg) adjustable spring range. Variation 11: 75 to 150 psig (5.17 to barg) adjustable spring range. Variation 12: 150 to 300 psig (10.34 to 20.7 barg) adjustable spring range. Models 19-D and 20-D Variation 05: 50 to 150 psig (3.45 to barg) spring range. Variation 06: 100 to 300 psig (6.9 to 20.7 barg) spring range. NOTE 1. Back pressure increases set pressure on a one to one basis and reduces capacity. Back pressure in excess of 10% of set pressure is not recommended. Model 20MP: as model 20M except with packed lift lever. Maximum back pressure of 50 psig (3.45 barg). [1] Model 200A: special non-chattering design. Recommended for light oils and continuous by-pass or pressure regulation. UL842 listed for light oil service. Available in ¾ to 1½ sizes. Female NPT connections only. Model 200H: as model 20. UL842 listed for use with fuel oils. Available in ¾ to 2" sizes. 2
3 PARTS AND MATERIALS No. Part name 19, 19M 20, 20M, 20P, 20MP, 200A, 200H 1 Body [1] Bronze B62 Bronze B62 2 Stem retainer Brass B16 Brass B16 3 Disc Bronze B584 Alloy [2,3] Bronze B584 Alloy [2,3] 4 Spring step Brass B16 Brass B16 5 O-ring PTFE PTFE 6 Spring SS 316 or 17-7 SS 316 or Stem Brass B16 Brass B16 8 Bonnet Bronze B584 Alloy Bronze B584 Alloy Jam nut Steel A108 zinc plated Brass B16 10 Compression screw Brass B16 Brass B16 11 Cap N/A Brass B16 12 O-ring N/A NBR 13 Drive screw [6] SS commercial SS commercial 14 Handwheel Iron A126 zinc plated [5] N/A NOTES 1. Flanged connections optional. 2. Models 19, 20, 20P, 200H are brass, B283, Alloy 485, for ½, ¾, and Models 19M, 20M, and 20MP are SS A743-CF8. 4. Model 200A is brass B Bronze B584 Alloy for ½, ¾, 1¼. 6. Not used on bonnet for 2½ and 3. MODELS 20, 200H WITH PRESSURE TIGHT CAP MODEL 19, 19M MODEL 200A 3 3
4 PARTS AND MATERIALS No. Part name Material 15 Retainer washer SS PH15-7MO 16 Stem end SS A Ball SS A Insert SS A743 GR CF8 19 O-ring PTFE 20 Lift cam SS A Cotter pin Steel 22 Lever Steel A108 zinc plated 23 Drive screw SS Commercial 24 Retainer cam Brass B16 25 O-ring NBR 26 Cap Bronze B584 Alloy Lift nut Steel A108 MODELS 19M, 20M AND 20MP 2½ SEAT CONFIGURATION MODELS 19M, 20M AND 20MP 3 SEAT CONFIGURATION MODELS 20MP AND 20P WITH LEVER
5 SPECIFICATIONS Size inlet/outlet NPT, (in) Min/max set pressure, (psig) [1] Min/max temperature Approximate weight 19, 20, 20P 200A, 200H 19M, 20M, 20MP ( F) (lb) ½ [2] 1/300-60/406 2¼ ¾ 1/300 1/200-60/406 2¼ 1 1/300 1/200-60/406 3½ 1¼ 1/300 1/200-60/ ½ 1/300 1/200-60/406 6¼ 2 1/300 1/200-60/ ½ 1/300 1/500-60/ /300 1/500-60/ MODELS 19, 19M C F A D DIMENSIONS (inches) Threaded 150/300 flange Valve model A B C D E F ½ Size ⅝ 6⅛ 3 5 / /16 7⅜ ⅝ 5⅞ 3 5 / /16 7¼ 20P 2 1⅝ 7⅜ ¾ Size ⅝ 6⅛ 3 5 / /16 7⅜ ⅝ 5⅞ 3 5 / /16 7¼ 20P 2 1⅝ 7⅜ 3 5 / /16 8¾ 200A 2 1⅝ 5⅞ 200H 1 15 /16 1⅝ 5⅞ 3 5 / /16 7⅜ 1 Size 19 2¼ 1⅞ 7⅛ 3 7 / /16 8¼ 20 2¼ 1⅞ 6¾ 3 7 / /16 7⅞ 20P 2¼ 1⅞ 8¾ 3 7 / /16 9½ 200A 2¼ 1⅞ 6¾ 200H 2¼ 1⅞ 6 11 / / /16 8 Dimensions are for reference only NOTES 1. All flanges rated per ANSI B Standard with ¾ outlet - ½ outlet optional. B E MODELS 20, 20M, 200A, 200H B E MODELS 20P, 20MP A C F D C F A D B E 5
6 DIMENSIONS (inches) Threaded 150/300 flange Valve model A B C D E F 1¼ Size 19 2⅝ 2 1 /16 8⅛ 3 11 / /16 9⅛ 20 2⅝ 2 1 /16 8⅛ 3 11 / /16 8⅜ 20P 2⅝ 2 1 / / / A 2⅝ 2 1 /16 7⅜ 200H 2⅝ 2 1 /16 7⅜ 3 11 / /16 8⅝ 1½ Size /16 2⅛ 8⅝ 4⅛ 4⅛ 10⅛ /16 2⅛ 8⅝ 4⅛ 4⅛ 9¼ 20P 2 11 /16 2⅛ 9¼ 4⅛ 4⅛ 10¾ 200A 2 11 /16 2⅛ 7⅞ 200H 2 11 /16 2⅛ 7⅞ 4⅛ 4⅛ 9½ 2 Size 19 3½ 2 11 /16 10⅝ 4¼ 4¼ 11¼ 20 3½ 2 11 /16 10⅝ 4¼ 4¼ 10⅝ 20P 3½ 2 11 /16 12½ 4¼ 4¼ 13⅛ 200H 3½ 2 11 / /16 4½ 4¼ /16 2½ Size 19 3⅞ 3 11⅛ 4¾ 4¾ 12 19M 3⅞ 3 11⅛ 4¾ 4¾ 12¼ 20 3⅞ ¾ 4¾ 13 5 /16 20M 3⅞ ¾ 4¾ 13 9 /16 20P 3⅞ 3 12½ 4¾ 4¾ 15¾ 20MP 3⅞ 3 12½ 54¾ 4¾ 16 1 /16 3 Size 19 4⅝ 3⅞ 12¼ ⅝ 19M 4⅝ 3⅞ 12¼ ⅛ 20 4⅝ 3⅞ 12¼ ¾ 20M 4⅝ 3⅞ 12¼ ⅛ 20P 4⅝ 3⅞ 14⅜ ⅞ 20MP 4⅝ 3⅞ 14⅜ ¼ Dimensions are for reference only MODELS 19, 19M B E MODELS 20, 20M, 200A, 200H B E A C A F D C F D MODELS 20P, 20MP C F A D B E 6
7 NON-CODE LIQUID CAPACITY - 25% ACCUMULATION (GPM) Set pressure Valve inlet and outlet size (psig) ½ ¾ 1 1¼ 1½ 2 2½ NOTE 1. Liquid overpressure factors To determine capacities at other than 25% overpressure/accumulation, multiply capacity shown by: 10% acc. = % acc. = % acc. = 0.9 7
8 NON-CODE LIQUID CAPACITY - 25% ACCUMULATION (GPM) Set pressure Valve inlet and outlet size (psig) ½ ¾ 1 1¼ 1½ 2 2½ NOTE 1. Liquid overpressure factors To determine capacities at other than 25% overpressure/accumulation, multiply capacity shown by: 10% acc. = % acc. = % acc. = 0.9 8
9 MODEL 200A 'D' - ¾ Overpressure psi 25% 50% 75% 100% MODEL 200A 'E' - 1 Overpressure psi 25% 50% 75% 100%
10 MODEL 200A 'F' - 1¼ Overpressure psi 25% 50% 75% 100% MODEL 200A 'G' - 1½ Overpressure psi 25% 50% 75% 100%
11 SELECTION GUIDE Example: F 01 - G 0075 Model M M 020P 20MP 200A 200H Inlet size C ½ G 1½ D ¾ H 2 E 1 J 2½ F 1¼ K 3 Variation See chart page 12 Design revision Indicates non-interchangeable revision. Dash (-) if original design. Spring material G 316 SS H 304 SS (only for Model 19M-K 300 psig or greater) Set pressure psig psig psig 11
12 Variation ½ Male x ¾ female ½ Male x ½ female ½ Female x ¾ female Male x female with gag ½ Female x ½ female ½ 150 Flg x ½ 150 Flg ½ 300 Flg x ½ 150 Flg Male x female Female x female (200A) Female x female 150 Flg x 150 Flg 300 Flg x 150 Flg (200H) 300 Flg x 150 Flg 150 Flg x 150 Flg (200H) ¾ 300 Flg x ¾ 150 Flg (020P-D) Male x female (19-D, 20-D) 50 to 150 psig Male x female (19-D, 20-D) 100 to 300 psig Model - inlet size Inlet x outlet [1] C, 20-C, 20P-C ½ x ½ (¾ ) X X X X X X 19-D, 20-D ¾ x ¾ X X X X X X 200A-D ¾ x ¾ X 200H-D ¾ x ¾ X X X X 19-E, 20-E, 20P-E2 1 x 1 X X X X 200A-E 1 x 1 X X 200H-E 1 x 1 X X X X 19-F, 20-F, 20P-F2 1¼ x 1¼ X X X X 200A-F 1¼ x 1¼ X 200H-F 1¼ x 1¼ X X X X 19-G, 20-G, 20P-G2 1½ x 1½ X X X X 200A-G 1½ x 1½ X 200H-G 1½ x 1½ X X X X 19-H, 20-H, 20P-H2 2 x 2 X X X X 200H-H 2 x 2 X X X X 19-J, 19M-J, 20J, 20P-J, 20M-J, 20MP-J 2½ x 2½ X X X X 19-K, 19M-K, 20-K, 20P-K, 20M-K, 20MP-K 3 x 3 X X X X 20P-D ¾ x ¾ X X X X X NOTES 1. Not available for 20P-C. 2. Variation 04 not available for 20P-E, 20P-F, 20P-G, and 20P-H. PENTAIR VALVES & CONTROLS All Pentair trademarks and logos are owned by Pentair plc. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change product designs and specifications without notice. Pentair is an equal opportunity employer Pentair plc. All rights reserved. 12
Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]
![Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]](/thumbs/76/73640006.jpg "Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]")
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified.
KUNKLE Safety and Relief ValVe PRoductS overview
KUNKLE Safety and Relief ValVe PRoductS overview april 2015 KUNKLE Safety and Relief ValVe PRoductS overview Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP, 200A and
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW
KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW ISSUED NOVEMBER 2012 KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW Contents Models 1 and 2 Brass Safety Valves... 4 Models 19, 19M, 20, 20M, 20P, 20MP,
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
Kunkle Safety and Relief Products Models 6252 and 6254
ASME Section I Steam and ASME Section VIII, Air, Steam and Gas UV National Board Certified. Model 6254 ASME Section IV HV, National Board Certified. PED Certified for Non-Hazardous Gas. Features Heavy
Safety and Relief Valves Product Overview
Safety and Relief Valves Product Overview Kunkle Valve is a leading supplier of Safety and Relief Valve Products for industrial and commercial applications, such as steam boilers, air, or non-hazardous
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
Anderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
1541/1543 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 11/2014 Consolidated * Valves 1541/1543 Series Safety Valve Designed for steam and other compressible fluids, these valves are most commonly used in pharmaceutical,
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
High Pressure 2-way 2 1/2-6 Globe Valves
Overview Datasheet High Pressure 2-way 2 1/2-6 Globe Valves Designed to work with either an electronic actuator with a 3/4-inch (20 mm) or 1-1/2-inch (40 mm) stroke, the two-way globe valves are available
CASH VALVE K SERIES BACK PRESSURE VALVES
High capacity angle bypass regulators or back pressure control valves with models for pressures to 1500 psig (103.4 barg) and capacities to 200 gallons per minute (757 l/min.) FEATURES GENERAL APPLICATION
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
CASH VALVE SERIES FR BACK PRESSURE VALVES
Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
Kunkle Safety and Relief Products
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
SAFETY relief VALVE SERIES # 006 DESIGN FEATURES HARSHAD ENGINEERING WORKS HARSHAD ENGINEERING WORKS TECHNICAL DATA : ISO 9001 CERTIFIED COMPANY
PROVIDES HIGH QUALITY OVERPRESSURE PROTECTION FOR AIR, GAS, LIQUID & STEAM IN SINGLE STANDARDIZED DESIGN SAFETY relief VALVE DESIGN FEATURES SAFETY VALVE MANUFACTURED IN ACCORDANCE WITH REQUIREMENT OF
The PL Series Pressure Air Release Valves. Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger. Crispin.
The PL Series Sizes 1 thru 6 Available Compound Lever System Adjustable Buna-N Rubber Plunger Crispin Since 1905 PL SERIES Functio n Allows air and/or gas to be released from a pressurized liquid system
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
Model descriptions. Applications
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified. Models 920, 921 and 927 ASME Section I Special use
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Kunkle Safety and Relief Products. Series 6000
ASME Section I and VIII, Steam, V and UV, ASME Section VIII, Air/Gas UV National Board Certified. Models 6933, 6934, and 6935 are ASME Section IV, Steam, HV National Board Certified. PED Certified for
Crispin. The UL Series Universal Air Release Valves. Compound Lever System NPT Screwed or ANSI Class Flanges Available.
The UL Series Universal Air Release s Compound Lever System NPT Screwed or ANSI Class Flanges Available Crispin Since 105 sales@crispinvalve.com Universal Air Release s Universal Air Release UL SERIES
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
The 7100B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction
VALVES & CONTROLS VAREC 00B SERIES The 00B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction The Varec 00B Series is a pressure relief valve designed
Safety and Relief Valves for Industrial and Commercial Applications.
Safety and Relief Valves for Industrial and Commercial Applications. Kunkle Safety and Relief Valve Products Overview Kunkle Safety and Relief Valve Products Overview Contents Models 1 and 2 Brass Safety
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
3-way 1/2-2 Globe Valves
Datasheet Overview Designed to work with either an electronic actuator with a 3/4-inch (20 mm) stroke, the three-way globe valves are available in ANSI Class 250 for normally closed or normally open action.
Anderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
CASH VALVES TYPE G-60 HIGH CAPACITY PRESSURE REGULATOR
The Type G-60 is a high capacity all purpose regulator designed to operate within close operating limits. Application Type G-60 regulators are designed for use with steam, water, air, oil, gases, chemicals
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
P99 Pressure Reducing Regulator
P99 Pressure Reducing Regulator Applications City / District gate operation Commercial buildings Boilers, furnace, oven Plant air service Features 5 Pilot choices for low to extra high pressure Up to 1,000
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-05-NPT Stainless Steel Back Pressure Regulator Valve
Kunkle Series 900 safety relief valves safety and relief products
Bronze, steel and stainless steel safety relief valves for air, gas, steam, liquid and vacuum service that meet ASME Section VIII, UV ; Section I, V, are National Board certified and PED certified for
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS
Bronze safety valves to ASM section I and VIII, steam, V and UV ; section VIII, air/gas, UV National Board certified including models to ASM section IV, steam V. P certified for non-hazardous gas ATURS
Product overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
SV80H Safety and Relief Valves
Page 1 of 18 BR Rev.02 U SH Safety and Relief alves Description The SH is a full nozzle safety and relief valve with orifices D to T, comply with the API STD 526, beyond others with super capacity. Suitable
Keystone Butterfly Valve Figure 9
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
Type 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
Installed on the pump suction, CRISPIN Foot Valves prevent the
Foot Valves Crispin Foot Valves SERIES Valve Function Maintains pump prime upon pump outage Features Resilient seat provides positive shut off Full flow area Stainless steel inlet screen Rugged construction
Series Low Pressure Steam Boiler Safety Valves
14-200 Series Low Pressure Steam Boiler Safety Valves ASME Section IV Set pressures from 5 to 15. Sizes 2", 2-1/2" and 3". Section IV Heating Boilers Applications: The 14 Series is an ASME Section IV high
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES
KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES KENNEDY VALVE AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 UL-262/FM-1120/1130 ULC-Underwriters of Canada 2 1/2
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
Consolidated* Valves 1511 Series Safety Valve
Technical Specifications Rev. B - 10/2018 Consolidated* Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well as
MCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
CROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
US SERIES. Universal Sewer Valves. Universal Sewer Valves. Valve Function. Features Include
Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Allows accumulating air to escape while line is in operation Features Include Standard and short body series available
Screwed Bonnet Needle Valves. Needle Valves
89 Design & Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.172 to.438 in. Flow Coefficients (Cv) from.37 to 2.7 Straight or angle flow patterns Optional panel mount Handle options available
STC Manual & Actuated Process Valves
STC Manual & Actuated Process Valves Fine Quality Precision Engineered Excellent Prices Advanced Design connects fluid power to industrial automation Table of Contents STC Valve Numbering System.......2
INTRODUCTION BODY SUB-ASSEMBLY (FIGURE 1) 2 G X L GLOBE CONTROL VALVE VALTEK SULAMERICANA. Top entry assembly: quick and easy maintenance
globe control valve INTRODUCTION The GXL globe control valve was developed as a simple, lightweight and more economical alternative to the renowned and advanced design of the Valtek Sulamericana GLS globe
TECHNICAL INSTRUCTIONS Heavy Duty Bronze Series
HEAVY DUTY BRONZE CONTROL S TECHNICAL INSTRUCTIONS Heavy Duty Bronze Series Form TI593UBS HEAVY DUTY BRONZE SERIES DESCRIPTION The Flowrite II Heavy Duty Bronze Series are designed for low cost modulating
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
Yarway Hy-Drop Throttling valve
YARWAY Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation Features Dual range throttling - primary range plus a super capacity blast range. Rapid energy
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation.
Controls the destructive forces inherent in high pressure drop service through rapid energy dissipation. Features General application The throttling valve is designed for continuous blowdown, but also
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
Series Pressure Relief Valves 197C
Series 2700 Pressure Relief Valves 197C Table of Contents General Description...IFC Ordering Information & Numbering System...1 Bill of Materials-Conventional...2 Bill of Materials-Balanced Design...3
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends
BA-350 Series (Medical Gas Service) 3-Piece Bronze Ball Valve With Extended Copper-Tube Ends 3-Piece, Full-Port, Bronze Ball Valve Extended-Tube Ends Ideal for use in medical gas systems, pharmaceutical
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
MERCER VALVE 1400 SERIES THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 1400 SERIES MERCER VALVE THINK...MERCER FIRST 1400 Series Product Overview The 1400 Series is a safety relief valve designed for lower capacity systems. The
Series Low Pressure Steam Heating Boiler Safety Valves
12-200 Series Low Pressure Steam Heating Boiler Safety Valves Section IV Heating Boilers Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
VAREC 5910B AND 5920B SERIES RELIEF VALVE WITH FLAME ARRESTER
These units combine the high flow capacity of a pressure and vacuum relief valve with an easy-to-maintain flame arrester for maximum protection and reliable operation FEATURES 5920B Oversized pressure
120 SERIES ONE PIECE TYPE
120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight,
Self-Operating Temperature Regulators
Self-Operating Temperature Regulators Remote Bulb for Heating, Cooling, Mixing and By-Pass Applications Powers # Regulators With Powers # Self-Operating Temperature Regulators, you no longer need external
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
KOMBAT K1 Pneumatic Control Valve
Applications Bottle Washing Induction Furnaces Machinery Industrial Compressors Steam Tables Cold Storage Boxes Plating Tanks Cooling Ducts Heating Ducts Engine Jacket Cooling Fuel Oil Heaters Liquid Chillers
Keystone Figure 9 Butterfly Valve
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
Safety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
HD Series. Pilot-Operated Regulating Valves. HD Series features & benefits
Watson McDaniel reserves the right to change the designs and/or materials of its products out notice. 2004 Watson McDaniel Company features & benefits Ductile Iron body for higher pressures Full port strainer
AN ISO 9001:2008 CERTIFIED COMPANY. Safety Valve
AN ISO 9001:2008 CERTIFIED COMPANY Safety Valve SAFETY VALVE FEATURE : - The Cr-V spring & novel disc & seat design provide reliable bubble tight seal. - Excellent re-seating ability - It features heavy-duty
CASH VALVES TYPE G-60 PRESSURE REGULATORS
A self-contained, self-actuated high capacity all purpose regulator designed to operate within close limits FEATURES GENERAL APPLICATION The G-60 is designed for use with steam, water, air, oil, gases,
ELECTRICALLY ACTUATED DOUBLE SEATED IRON - 1 1/2-2
u APPLICATION: Control of Saturated Steam; Water; Water & Glycol Solutions. Seat Leakage Class ANSI III. u CONSTRUCTION: Body: Trim: Stem: Bonnet: Packing: ANSI B16.15 Iron 250lb.Threaded (NPT) EQ%, 300
Crosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
Yarway Narvik Model 37 and 47 Cryogenic injector
Cryogenic injector for LNG applications Features Fabricated construction High quality stuffing box with PTFE Chevron rings Variable nozzle type Wide range of K v (C v ) available Special nozzle combinations
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
Industrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product