VAREC 5910B AND 5920B SERIES RELIEF VALVE WITH FLAME ARRESTER
|
|
|
- Clifford Brooks
- 5 years ago
- Views:
Transcription
1 These units combine the high flow capacity of a pressure and vacuum relief valve with an easy-to-maintain flame arrester for maximum protection and reliable operation FEATURES 5920B Oversized pressure and vacuum ports. Oversized flame arrester bank assembly for minimum pressure drop. Replaceable and interchangeable pressure and vacuum seat rings. All-weather coating option available for valve seats and guides. Vent to atmosphere or pipe-away models. Large flow capacity allows use of smaller size. Easy maintenance. Application flexibility for either weather or emissions considerations. Reduced number of spare parts required. 5910B GENERAL APPLICATION The 5910B and 5920B Series are for vertical installations and are installed on above ground storage tanks containing potentially flammable liquids and vapors. TECHNICAL DATA Materials: Aluminum, carbon steel, stainless steel Sizes 5910B: 2 to 12 (50 to 300 mm) 5920B: 2 x 3 to 12 x 14 (50 x 75 mm to 300 x 350 mm) Connections: Drilled flange Pressure/vacuum settings: To 1 psig (.07 barg) Temperature (min.): -25 F [-32 C] Emerson.com/FinalControl 2017 Emerson. All Rights Reserved. VCTDS EN 17/07
2 SPECIFICATIONS MODELS OVERVIEW The 5910B/5920B Series relief valves protect tanks from excessive pressure and vacuum, maintaining system operating pressure so vapor is not vented to the atmosphere routinely. The flame arrester protects the tank from accidental ignition of vapor within the tank. It is designed to stop the propagation of flame from external sources. For further information on these devices, see the product data sheets for Varec 2010B/2020B and 5400A. A variety of materials is available to suit climate conditions. The standard aluminium construction is suitable for moderate climates. In extreme hot, humid or freezing weather, the all-weather 5911B Series is recommended. This design incorporates added features that reduce potential malfunctions from these extreme conditions. The 5920B Series provides for further protection from cold climates and a means to route vented vapor instead of venting to atmosphere. This unit incorporates an enclosed pressure port on the relief valve and is especially suited for field installation of insulation jackets or insulated shelters. The 5921B Series includes the pipe-away outlet and all-weather features for maximum cold weather protection. If H 2 S corrosion is a concern, supplying the relief valve with 316 SS trim is an option. The flame arrester bank is also available in 316 SS. OPERATION Whenever the tank pressure or vacuum exceeds the setting, the pallet lifts. Only excess pressure is vented to the atmosphere. Air is drawn into the tank only to relieve an excess vacuum condition. The valve remains closed when the vapor space remains within normal operating pressure. The valve pallets are deadweight loaded with a field adjustable pressure setting range. Side and center pallet guides are incorporated for stability. Air cushion PTFE seat inserts ensure a tighter seal and can be replaced easily. The case outlet adapter on the pipe-away model is one pipe size larger than the valve inlet flange to optimize flow capacities. The all-weather models feature a special non-frosting and icing-resistant coating which is applied to the pallet perimeter and stem, guide posts and seat ring tip to provide additional protection against pallets freezing closed. The flame arrester helps stop the propagation of a flame by absorbing and dissipating heat through the surface area of the bank. Heat is absorbed as ignited gas attempts to pass through the small passages within the bank assembly. This action lowers the temperature of the gas below its ignition point and quenches the flame. The net free area through the flame arrester bank is three to four times the unit pipe size. This design provides increased flow capacity with minimal pressure drop. The bank assembly can be inspected easily and cleaned to remove any dirt or residue build-up. 2
3 SPECIFICATIONS Sizes 5910B: 2", 3", 4", 6", 8", 10" and 12" 5920B: 2" x 3", 3" x 4", 4" x 6", 6" x 8", 8" x 10", 10" x 12" and 12" x 14" Connections Aluminum - drilled to ANSI 150 flat faced flange connection. Steel - drilled to ANSI 150 raised face flange connection. Special drilling requirements to DIN, JPI or JIS standards are available upon request. Consult your sales representative for further details. Flow data Consult your sales representative for flow data information. Valve sizing programs are available upon request. Settings Pressure and vacuum settings: available up to 1 psig. Flame arrester standard specification Model 5400A flame arrester UL (Underwriters Laboratories) listed in all aluminum construction in 2", 3" and 4" (50, 75 and 100 mm) sizes. FM approved all sizes and all materials. APPLICATIONS The arresters are designed to stop the propagation of flame (Group D gases) from external sources. They can be mounted up to 15 feet (4.6 m) upstream of the ignition source in accordance with UL approval, or 10 pipe diameters in accordance with FM approval requirements. 3
4 R R VAREC 5910B AND 5920B SERIES RELIEF VALVE WITH FLAME ARRESTER DIMENSIONS 5910B SERIES 5920B SERIES B Thick gasket (by others) D B 2010B Series Pressure and vacuum relief valve 2010B Series Pressure and vacuum relief valve Standard outlet flange 125/150 ANSI Flange drilling [1] Thick gasket (included) A Thick gasket included Mounting hardware included (Zinc plated steel) 5400A Series flame arrester A C ± 1 /4 [6] Mounting hardware included (Zinc plated steel) 5400A Series Flame arrester Standard inlet flange 125/150 ANSI Flange drilling [1] Standard inlet flange 125/150 ANSI Flange drilling [1] Thick gasket (by others) Thick gasket (by others) NOTE 1. Aluminum bodies flat face only. Stainless and carbon steel raised face only. 5910B DIMENSIONS, inches (mm) Size A B 2 25 (635) 9⅞ (251) 3 28⅞ (733) 12¼ (311) 4 34⅞ (886) 12 7 /16 (316) 6 40 (1016) 15½ (394) /16 (1205) 19 9 /16 (497) (1473) /16 (633) 12 66½ (1689) 29⅜ (746) 5920B DIMENSIONS, inches (mm) Size Inlet Outlet A B C D ⅝ (600) 9⅞ (251) /16 (503) 4 15 /16 (125) /16 (694) 12¼ (311) 22 7 /16 (570) 6⅜ (162) ⅛ (841) 12 7 /16 (316) 27 3 /16 (691) 8 (203) /16 (1030) 15½ (394) /16 (808) 8¾ (222) /16 (1218) 19 9 /16 (497) /16 (964) 11 3 /16 (284) ⅛ (1476) /16 (633) /16 (1186) 13⅝ (346) ⅝ (1692) 29⅜ (746) 53⅜ (1356) 15⅜ (391) 4
5 ORDERING INFORMATION SELECTION GUIDE Example: B 8 2 Model 59 Relief valve and flame arrester Configuration 1 Vent to atmosphere 2 Pipe-away Model 0B Air cushion type 1B 'All weather' type Size (Pipe-away option) 2 2" (x 3") 3 3" (x 4") 4 4" (x 6") 6 6" (x 8") 8 8" (x 10") 0 10" (x 12") 1 12" (x 14") Relief valve and flame arrester material (must specify one) 1 All-aluminum construction Aluminum body and trim on valve, aluminum housing, flame bank, FF flange connections drilled to ANSI Aluminum/stainless steel construction Aluminum body and stainless steel trim on valve; aluminum housing with Stainless steel flame bank, FF flange connections drilled to ANSI Carbon steel/stainless steel construction Carbon steel body and stainless steel trim on valve; carbon steel housing with stainless steel flame bank, RF flange connections drilled to ANSI All-stainless steel construction 316 SS body and trim on valve, stainless steel housing with stainless steel flame bank, RF flange connections drilled to ANSI 150 Example: pressure/vacuum relief valve with flame arrester, vent to atmosphere, air-cushion type, 8" size, aluminum body and stainless steel trim on valve; aluminum housing and extensible bank, rectangular stainless steel sheets on flame arrester. Specify pressure and vacuum settings. 5
6 SHIPPING WEIGHTS 5910B SHIPPING WEIGHTS, lbs. (kg) Material code Size (24) 72 (33) 107 (49) 107 (49) 3 78 (35) 108 (49) 158 (72) 158 (72) (51) 157 (71) 247 (112) 247 (112) (80) 232 (105) 367 (166) 367 (166) (110) 327 (148) 602 (273) 602 (273) (190) 553 (251) 933 (423) 933 (423) (289) 837 (380) 1227 (557) 1227 (557) 5920B SHIPPING WEIGHTS, lbs. (kg) Material code Size (28) 82 (37) 136 (62) 136 (62) 3 93 (42) 123 (56) 202 (92) 202 (92) (60) 177 (80) 305 (138) 305 (138) (94) 262 (119) 455 (206) 455 (206) (128) 367 (166) 719 (326) 719 (326) (226) 633 (287) 1166 (529) 1166 (529) (337) 942 (427) 1533 (695) 1533 (695) 6
7 7
8 8
VAREC 5810B AND 5820B SERIES RELIEF VALVE WITH FLAME ARRESTER
These units combine the high flow capacity of a pressure and vacuum relief valve with an extensible bank flame arrester to provide maximum protection and reliable operation FEATURES 5820B Oversized pressure
VAREC 5810B/5820B Series. Relief Valve and Flame Arrester
VAREC 0B/0B Series The 0B/0B Series is a combination of the 00B/00B Series and Relief Valve and the 000 Series Flame Arrester. INTRODUCTION The VAREC 0B/0B Series Relief Valve and Flame Arrester is a combination
For high temperature and chemical applications, Varec recommends the extended service option which features Teflon or Viton O-ring and gasket.
GAS CONTROL VAREC 7100B Series PRESSURE RELIEF VALVES The 7100B Series is designed to protect low pressure storage tanks and systems from being over pressured. Introduction The Varec 7100B Series is a
The 7100B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction
VALVES & CONTROLS VAREC 00B SERIES The 00B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction The Varec 00B Series is a pressure relief valve designed
ANDERSON GREENWOOD TYPE 4410 SIDE ENTRY ATMOSPHERIC VACUUM RELIEF VALVES
Weight or spring loaded valves with a side inlet capable of high capacity vacuum relief. Designed to work closer to a tank's MAWV, increasing productivity, reducing emissions and product evaporation FEATURES
COVER EQUIPMENT. VAREC BIOGAS 400W Series EMERGENCY RELIEF MANHOLE COVERS
COVER EQUIPMENT VAREC BIOGAS 400W Series EMERGENCY RELIEF MANHOLE COVERS The 400W Series is designed to provide emergency pressure and/or vacuum relief in storage tanks and vessels. Introduction The Varec
2010B. Available Materials Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
OVER EQUIPMENT VRE 0 / 00 Series PRESSURE N VUUM RELIEF VLVE The 0/00 protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation.
94407 Horizontal Inline Deflagration Flame Arrester
94407 The Shand & Jurs 94407 Horizontal Inline Deflagration Flame Arrester is designed to provide a positive flame stop in horizontal gas piping systems containing flammable vapors having a low flash point.
94406 Vertical Inline Deflagration Flame Arrester. Features
94406 The Shand & Jurs 94406 Vertical Inline Deflagration Flame Arresters are designed to provide a positive flame stop on low pressure tanks or piping systems containing flammable liquids or solvents
Biogas safety control equipment
Biogas safety control equipment As environmental concerns and energy efficiency are increasing, efficient economical and safe gas control systems become an increasingly important part of operating the
DETONATION FLAME ARRESTER MODEL 7658A
DETONATION FLAME ARRESTER MODEL 7658A Actual Video Frame USCG Approved Successfully Tested to Procedures Approved by USCG, IMO & CSA Multiple Flow Selections per Pipe Size In-line Maintenance Available
MODEL 1200A PRESSURE / VACUUM RELIEF VALVE. Sizes 2 through 12 Pressure settings 1. Vacuum settings 1
Sizes through Pressure settings oz/in to 5 PSIG Vacuum settings oz/in to PSIG Available in aluminum (type 356), carbon steel, stainless steel, fiberglass, and other materials Modular construction PRESSURE/VACUUM
PASSIVE OPERATION Completely self-contained with no reliance on power supplies, sensors, actuators or any external components.
GAS CONTROL VAREC 9 Series IN-LINE DETONATION FLAME ARRESTER The 9 Series In-Line Detonation Flame Arreresters are designed for installation in piping systems to provide explosion protection. Introduction
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Available in aluminum (type 356), carbon steel, stainless steel and other materials.
Sizes through 1 Pressure settings 1 oz/in to 15 PSIG Available in aluminum (type 56), carbon steel, stainless steel and other materials. PRESSURE RELIEF VALVE MODEL 00A EMERGENCY RELIEF VALVE Model 00A
Flame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 300. Product Description. (Vertical, in-line, deflagration)
ATEX approved Flame Arrester (Vertical, in-line, deflagration) Model Number 300 Product Description EGIL Storagetech Model Number 300 Flame Arrester is a safety device that has a flame barrier with a large
Tank Fittings, Flame Arresters, Valves, Gauges, & Accessories
Tank Fittings, Flame Arresters, Valves, Gauges, & Accessories Tank Fittings & Flame Arresters by Shand & Jurs Today s growing markets call for keeping an increasingly larger supply of your products close
Kunkle Models 189/363/389 safety valves Safety and relief products
Heavy duty ASME Section VIII, air/gas cryogenic, UV, National Board certified safety valves Model 189 Features Heavy duty construction provides long service life. Unique three-piece disc assembly with
SERIES 670E End-of-Line Deflagration Flame Arrester
SERIES 670E PROTECTOSEAL CAUTION: If any questions arise concerning the proper installation or maintenance of our products, please contact Protectoseal or one of our Authorized Representatives. When installing
KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS
Extra-heavy rugged construction non-code bronze liquid relief valves with a variety of model options to meet specific applications FEATURES Inlet and outlet connections cast integral with body for easy
SPRING LOADED VENTS. Set Points of 3 PSIG and Above PROTECTOSEAL
SPRING LOADED VENTS Set Points of 3 PSIG and Above PROTECTOSEAL SERIES STYLE 9540 End-of-Line Pressure/Vacuum Breather Vent 19540 Pipe-Away Pressure/Vacuum Breather Vent 9240 End-of-Line Vacuum Relief
Varec Series 5000/5010 Flame arresters Instruction, operation and maintenance manual
Varec Series 000/0 lame arresters efore installation these instructions must be fully read and understood 000 series - vertical isclaimer of warranties 0 series - horizontal The contract between the seller
CASH VALVES TYPE G-4 PRESSURE REGULATORS
A self-actuating pilot operated pressure reducing valve handling air, gas and steam and accurate to within ½% up to 3" and 1% for sizes to 6 FEATURES Extremely compact design enables use of a smaller regulator.
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
13900 Series. Consolidated * Valves. Pilot-Operated Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 13900 Series Pilot-Operated Safety Relief Valve Designed specifically for high capacity steam applications, this series of valves contributes
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves
Y610A, Y611A, and Y612A Series Vacuum Service Equipment and Relief Valves July 2013 W1094_1 Figure 1. Type Y610A or Y610AP Vacuum Breaker Introduction The Y610A, Y611A, and Y612A Series devices (Figures
Anderson Greenwood Low Pressure POPRV Catalog Series 90 and 9000 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 90 and 9000 valves offer a high performance alternative to spring and weight-loaded relief devices for low pressure systems. Features and Benefits Tight Up to Set Pressure: Pilot
WB produces >>> 1. TANK FITTING PRODUCTS 2. ALUMINUM DOME COVERS 3. INTERNAL FLOATING ROOF SYSTEMS 4. EXTERNAL FLOATING ROOF SEAL SYSTEMS
WB produces >>> 1. 2. ALUMINUM 3. 4. SEAL 5. 3+1 WB, World Best Products, World Best Service, World Best Technology INDEX >>> 1. Pressure & Vacuum Relief Valves Products 03 2. Flame Arrestor Products 05
Special Kv available. Classification according pressure equipment Directive, 2014/68/UE
SELF-OPERATED PRESSURE REGULATORS PRESSURE REDUCING VALVE MODEL PRV45 PRODUCT FEATURES Self-actuating pressure reducing valve balancing by diaphragm used to provide a constant downstream still there being
Kunkle Bailey 756 safety relief valve
The 756 safety valve combines a top piston guided valve and an unobstructed seat bore with a full lift capability, giving maximum discharge capacity Features Design incorporates an adjustable blowdown
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
FRP VENTS. Fiberglass Reinforced Plastic Vents... No Exposed Metal Components. Distributed by Relevant Solutions relevantsolutions.
FRP VENTS Fiberglass Reinforced Plastic Vents...... No Exposed Metal Components PROTECTOSEAL SERIES STYLE SIZES1 P8540 H End-of-Line Pressure / Vacuum 12" - 12" P18540 H Pipe-Away Pressure / Vacuum 12"
ANDERSON GREENWOOD LOW PRESSURE POPRV CATALOG SERIES 90 AND 9000 PILOT OPERATED PRESSURE RELIEF VALVES. Product overview
VALVES & CONTROLS ANDERSON GREENWOOD LOW PRESSURE POPRV CATALOG Series 90 and 9000 valves offer a high performance alternative to spring and weight-loaded relief devices for low pressure systems. Product
Table of Contents. Introduction. Description. Greater Total System Efficiency. Improved Design. Easy Installation and Maintenance
Features & Benefits Table of Contents Features & Benefits................................................................ 13900.1 Scope of Design...................................................................
Specifications. Cover Equipment. Shand & Jurs Cover Position Indicator and MCG 2000MAX 4-20 Transmitter
Cover Equipment Shand & Jurs 92021 Cover Position Indicator and MCG 2000MAX 4-20 Transmitter The cover position indicator is designed to provide a continuous indication of the Digester Cover position and/or
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
ORIFICE PLATE flow meters
ORIFICE PLATE flow meters 1 Differential pressure and pressure loss When a throttle element is interposed in a closed passage of fluid in piping, a difference is produced between the pressure upstream
Flame arresters 4301A/4319A ATEX Approved
Flame arresters 4301A/4319A ATEX Approved The Whessoe Vapour Control range of flame arresters are designed and certified for use in conjunction with Whessoe pressure and vacuum valves, as well as for use
Propane Conversion Systems. Installation Instructions: 2S-LIFAN200TM 2S-LIFAN200FM 2S-LIFAN390TM 2S-LIFAN390FM
Propane Conversion Systems Installation Instructions: 2S-LIFAN200TM 2S-LIFAN200FM 2S-LIFAN390TM 2S-LIFAN390FM SAFETY FIRST PLEASE READ THE ENTIRE INSTRUCTION PROCEDURE AND SAFETY INFOR- MATION BEFORE ATTEMPTING
Pressure Relief Valves Series. Consolidated Safety Valve
Pressure Relief Valves 1511 Series Consolidated Safety Valve Consolidated Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications.
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -
Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/vinyl Grip 10. Stem Bearing
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
CASH VALVE SERIES FR BACK PRESSURE VALVES
Diaphragm actuated valves designed for either continuous or intermittent operation which provide accurate, repetitive pressure control FEATURES GENERAL APPLICATION For use on practically all fluids and
Installation, Operation and Maintenance Manual for Pressure/Vacuum Relief Valves
Installation, Operation and Maintenance Manual for Pressure/Vacuum Relief Valves Models 1200A, 1220A, 1260A, 1300A, 1360A, 2300A 2009 Groth Corporation IOM-1200A Rev. C 12793 Ref. ID: 95729 Page 2 of 18
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
SELKIRK CORP INSTALLATION INSTRUCTION SUPPLEMENT MODEL G - CHIMNEY LINER
SELKIRK CORP MODEL G - CHIMNEY LINER These instructions are supplemental to the General Installation Instructions for Selkirk Model G, PS, IPS and ZC Single Wall, Double Wall Air & Fiber Insulated Positive
Model ES-660-HF High Flow Spring-Loaded Hatch
Instruction Manual Model ES-660-HF February 2015 Model ES-660-HF High Flow Spring-Loaded Hatch Table of Contents Introduction...1 Specifications...2 Principle of Operation...2 Tagging Information...2 Installation
SECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION
SECTION J CONTENTS OPTIONAL CONFIGURATIONS DESCRIPTION PAGE Options Identification & Description J-1 Options Identification & Description J-2 Options Identification & Description J-3 Options Identification
KTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
Model 5000 Level Controller
Features Multiple Configurations The 5000 level controller is easily configured for either reverse or direct actions for both pneumatic and electric pilot options. The pneumatic pilot is available in snap
Y690A Series Pressure Reducing Regulators
Instruction Manual Form 5463 Y690A Series April 1999 Y690A Series Pressure Reducing Regulators Introduction Scope of Manual This manual provides instructions for installation, startup, maintenance, and
87A-200 Series. Stainless Steel ANSI Class 150 Flanged Full Port Ball Valve - 1/2 through 1 STANDARD FEATURES STANDARDS COMPLIANCE
Description (1/2 & 3/4 Valves) 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316 8. Stem Nut 300 Series Stainless Steel 9. Lever 300 Series Stainless Steel w/ Vinyl Grip 10. Stem Bearing RPTFE
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
Installation, Operation and Maintenance Manual for Spring Loaded Pressure/Vacuum Relief Valves
Installation, Operation and Maintenance Manual for Spring Loaded Pressure/Vacuum Relief Valves Models 1721B, 1722B, 1723A, 1761A 2010 Groth Corporation IOM-1721B REV. A 12541 Ref. ID: 95729 Page 2 of 18
MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
Installation, Operation and Maintenance Manual for Pressure/Vacuum Relief Valves (Spring Loaded)
Installation, Operation and Maintenance Manual for Pressure/Vacuum Relief Valves (Spring Loaded) Models L1201B, L1202B L1203A, L1221B, L1222B, L1223A, L1261A, L1301A, L1361A, L2301A 2010 Groth Corporation
North American Y-Type Strainers for Gas, Oil, Oxygen, Steam
Combustion North American Y-Type s for Gas, Oil, Oxygen, Steam The new 8555Y line provides many unique features: High pressure and temperature designs for rugged industrial applications Body and screen
7. Evaporative Emission Control System
W1860BE.book Page 10 Tuesday, January 28, 2003 11:01 PM 7. Evaporative Emission Control System A: GENERAL The evaporative emission control system prevents fuel vapors from escaping into atmosphere. This
Baumann Series Flexsleev Control Valve Instructions
Instruction Baumann 86000 Series Instructions Baumann 86000 Series Flexsleev Control Valve Instructions Contents Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Installation...3 Air Piping...3
Table of Contents. 1900/P3 Series Exposed spring design - The spring in this design is exposed for atmospheric cooling. D through T orifice sizes.
Scope of Design Table of Contents Scope of Design...............................................................1900P.1 Materials 1900/P1 (Conventional)......................................................1900P.3
High CATALOG. Efficiency. Pilot Operated Safety Valves Series 810 Pop Action Series 820 Modulate Action. The-Safety-Valve.com
High Efficiency Pilot Operated Safety Valves Series 10 Pop Action Series 20 Modulate Action CATALOG The-Safety-Valve.com Valve finder How to find the right product group High operating to set pressure
Engineered Solutions For Your Tank Equipment Needs
Engineered Solutions For Your Tank Equipment Needs Product Brochure World Leader in Tank Protection Flame & Deflagration Arresters Detonation Arresters Level Gauges Emissions Monitoring Conservation Vents
North American 1599 Electro-Hydraulic Gas Shutoff Valve Bulletin 1599
Combustion North American 1599 Electro-Hydraulic Gas Shutoff Valve 1599 valves are normally closed safety shutoff valves which are controlled by an electro-hydraulic actuator. 1599 s can be ordered as
megaflo BSP Pressure Relief Vent
Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the
Type 289P Pilot-Operated Relief Valve
Instruction Manual D102680X012 Type 289P July 2017 Type 289P Pilot-Operated Relief Valve Figure 1. 1 NPT Type 289P Pilot-Operated Relief Valve Figure 2. 2 NPT Type 289P Pilot-Operated Relief Valve Introduction
Flow Computer Installation
Flow Computer Installation WARNING: Only personnel who are experienced with field wiring should perform these procedures. All field wiring must conform to the National Electrical Code, NFPA 70, Article
860 and 960 Series Spring-Loaded Pressure/ Vacuum Relief Valve (ATEX Approved)
Instruction Manual D103813X012 860 and 960 Series October 2017 860 and 960 Series Spring-Loaded Pressure/ Vacuum Relief Valve (ATEX Approved) Table of Contents Introduction...1 Specifications...2 Product
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
Features Enclosed Burner. Enclosed Burner. No visible flame. Controlled Combustion environment with natural draft design
97311 The S&J 97311 Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Protection & Safety Equipments For Storage Tanks. Pressure / Vacuum Relief Valves, Flame Arresters, Free Vent, Gauge Hatch.
www.abspv.com Protection & Safety Equipments For Storage Tanks Pressure / Vacuum Relief Valves, Flame Arresters, Free Vent, Gauge Hatch ABS PV End. Valf San. ve Tic. A.S. Aydınlı Mah. Esenlik Sk. No :
Flame Arrester. ergil. ATEX approved. Storage Tank Protection Equipment. Model Number 320. Product Description. (Vertical, in-line, detonation )
ATEX approved Flame Arrester (Vertical, in-line, detonation ) Model Number Product Description EGIL Storagetech Model In-line Detonation Flame Arrester is designed for installation in gas pipelines. Detonation
97311T. Features T Enclosed Burner with Touch Screen Control Panel. No visible flame. Touch Screen Control Panel
97311T Designed for complete automatic operation of the entire Burner System, the S&J 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic
ES-660 Series Spring-Loaded Hatch
Instruction Manual ES-660 Series March 2015 ES-660 Series Spring-Loaded Hatch Table of Contents Introduction...2 Specifications...2 Principle of Operation...2 Tagging Information...2 Installation...3 Maintenance...4
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
Eco-Saf System. Type ECR Reverse Buckling Compression Loaded Disk
Catalog # 77-4012 Catalog # 77-4012 Eco-Saf System Type ECR Reverse Buckling Compression Loaded Disk ECR reverse buckling disk EC-7RS safety head BSBsystems.com BSB.ie Visit our website for the most complete,
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
ZAP * & KBA Reverse Acting Rupture Discs
ZAP * & KBA Reverse Acting Rupture Discs 3-2220-3 ZAP and KBA Rupture Discs The ZAP and KBA reverse acting rupture discs utilize knife blades to open the rupture discs as reversal occurs. The rupture discs
Cage type Single Seated Control Valves
No. SS-8-00 OVERVIEW Model HSC Cage Type Single Seated Control Valves are designed for high differential pressure heavy-duty service where flashing/cavitation may occur. Further, they are ideal for preventing
Design D4 Control Valve
Product Bulletin Design D4 Control Valve D4 Valve The Design D4 control valve is a compact, rugged globe valve designed primarily for high-pressure throttling applications. This valve is ideal for use
ANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
PRESSURE REGULATORS LIQUID BACK PRESSURE
LIQUID BACK PRESSURE APPLICATION: Control back pressure in liquid packed systems where an auxiliary source of supply gas pressure is available. SUPPLY PRESSURE: Equal to or not less than 60% of controlled
Anderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
Installation, Operation and Maintenance Manual for Flame Check
Installation, Operation and Maintenance Manual for Flame Check Model 7622B 2014 Groth Corporation IOM-7622B Rev. C 12444 Ref. ID: 98172 Page 2 of 9 Table of Contents SECTION PAGE I. Introduction 3 II.
OIL & WATER VALVES TREATER VALVE
TREATER VALVE APPLICATIONS: As oil or water valve for emulsion treaters, water knockouts and gunbarrels. Can be used for pressure, atmospheric, or vacuum operation. Ideal for discharging salt water to
OUNCES PRESSURE REGULATOR
OUNCES PRESSURE REGULATOR BACK PRESSURE TO VACUUM APPLICATIONS: To maintain ounces of positive pressure on systems flowing into a downstream vacuum, such as vapor recovery systems. PRESSURE RANGE: Upstream:
CROSBY STYLE JB PRESSURE RELIEF VALVE
A large orifice pressure relief valve engineered to provide high quality, dependable overpressure protection for air, gas, vapor and steam applications FEATURES Ten size product range is the broadest available.
Phone (toll-free): (888) Phone (local): (973) Fax: (973) Web:
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVC-05-FLG PRESSURE RELIEF VALVE FLANGED 150#, 300#,
Fuel Pump Module. Fuel Pump Module. Special Service tools. Remover/Installer, Fuel Pump Module/Fuel Transfer Pump Locking Ring A 1.
Fuel Pump Module Fuel Pump Module Special Service tools Remover/Installer, Fuel Pump Module/Fuel Transfer Pump Locking Ring 310-072A 1. WARNING: PLACE THE VEHICLE IN A QUARANTINED AREA AND ARRANGE NO SMOKING/PETROL
FLANGES PRODUCT: STANDARD FLANGE CLASSIFICATION: PRESSURE CLASS CLASIFICATION:
FLANGES Gestión de Compras manufactures and supplies flanges according to standards ANSI, BS, DIN, JIS and ISO as well as according to customer specifications. PRODUCT: Flanges are a pipe fitting which
PRESSURE REGULATORS LIQUID BACK PRESSURE
LIQUID BACK PRESSURE APPLICATION: Control back pressure in liquid packed systems where an auxiliary source of supply gas pressure is available. SUPPLY PRESSURE: Equal to or not less than 60% of controlled
Model 7A00 7A00 - TB TECHNICAL BULLETIN. Detonation Flame Arrestor
TECHNICAL BULLETIN 7A00 - TB 0-7 ISO Registered Company Model 7A00 Detonation Flame Arrestor OBJECTIVE The Model 7A00 detonation flame arrestor is a device that can be fitted to the opening of an enclosure
SR100 Series Service Regulators. Technical Bulletin
SR100 Series Service Regulators Technical Bulletin Model SR100 Series Regulator 02 Elster American Meter The compact, high capacity SR113 service regulator is designed for residential or light commercial/industrial
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,