12CS/50CS Series. Coreless Medium Pressure Filters

Transcription

1 1CS/CS Series Coreless Medium Pressure Filters 77

2 1CS/CS Series Applications Together we can Preserve the environment. Minimize waste and promote energy efficiency. Achieve worldwide filtration solutions. Build global confidence. Redefine new limits. Forge ahead with advanced technology. Keep contamination under control. Reduce maintenance costs. Enhance total system reliability. Focus on customer satisfaction. Reach optimum potential. Drill to greater depths. engineer your success. Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency, long life Ecoglass III filtration, without the environmental impact. The new environmentally-friendly 1CS and CS hydraulic filters feature a reusable bowl and a patented filter element constructed of reinforced polymer end caps, microglass media, and polymer pleat support. The element core is permanently attached as part of the filter bowl. When replaced, the element reduces costs, eliminates hot drain requirements, can be easily incinerated, and is bettersuited for most landfills. The psi filters are rated up to gpm, with premium Ecoglass III elements as standard offerings. The patented element design also prevents filter operation if the proper element is not in place. Typical Applications Mobile Ag Mobile Construction Material Handlers Aerial Lifts Pilot Lines Charge Pump Hydrostatic Drives Industrial Power Units Machine Tools Joy Stick Controls 78

3 1CS/CS Series Features Zero leakage bypass valve Drip edge to avoid moisture collection Flow diverting overmolded top endcap provides head/bowl seal Spin-on assembly with reusable bowl Patented coreless non-metallic Ecoglass element Permanent core as part of bowl assembly Analog or switch indicator option for predictive maintenance Indicators sense delta P with no external oil-ways Rugged design for mobile applications Upgrade for spin-on can applications Low cost manifold mount option available 79

4 1CS/CS Series The Smart Alternative to Spin-on Cans! Patented Filter Element Provides head-to-bowl seal Cannot operate without an element installed Coreless Ecoglass Elements Reduces disposal costs and environmental impact Ease-of-Service, environmentally friendly Spin-on Assembly with Reusable Bowl Improved, cost effective design Easy to maintain PSI Operating Pressure Withstands pressure surges Application versatility Option for Differential Pressure Sensing including an Analog -V Output For predictive maintenance No external oil-ways 8

5 1CS Series Performance Efficiency Capacity Beta Rating Efficiency % 1 1 Q 1Q 99.9 Q 1Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO 1 gpm to psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS(cSt) 1. 1SUS Empty Housing Q 1Q / Nominal Port Size

6 CS Series Performance Beta Rating Efficiency Efficiency % Capacity 1 1 Q 1Q 99.9 Q 1Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO gpm to psid terminal - 1 mg/l BUGL. Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS ( cst) SUS Empty Housing Q 1Q " Nominal Port Size 1 1/" Nominal Port Size 1 1/" Nominal Port Size

7 1CS Series Specifi cations Pressure Ratings: Maximum Allowable Operating Pressure (MAOP): psi (. bar) Fatigue: psi (7.6 bar) 1,,+ cycles: - psi Design Safety Factor:.:1 Operating Temperatures: Nitrile: -ºF to ºF (-ºC to 17ºC) Fluorocarbon: -1ºF to ºF (-6ºC to 17ºC) Element Collapse Rating: 1 psid (1. bar) Weights (approximate): 1CS-... lbs. (1. kg) 1.8 [.9 mm].69 [ 17. mm] 1.8 [.9 mm] OUTLET INLET.69 [ 17. mm] MOUNTING HOLES SEE CHART Materials: Head: cast aluminum Bypass valve: nylon with steel spring Filter element: reinforced polymer end caps, microglass media, and polymer pleat support Bowl: wrought aluminum Permanent core: steel.7 [9.7 mm] 1.87 [ 7. mm] LEFT SIDE INDICATOR LOCATION (IF USED).9 [.6 mm] PORT OPTIONS: SEE CHART BOTH PORTS IDENTICAL RIGHT SIDE INDICATOR LOCATION (IF USED) PARKER LABEL OUTLET INLET INLET OUTLET PARKER LABEL [ mm] BOWL TORQUE: - FT-LBS [ - 7 Nm] 1. [. mm] MINIMUM ELEMENT REMOVAL CLEARANCE Drawings are for reference only. Contact factory for current version. 1.6 [6.9 mm] NOMINAL Port Option Port Thread Mounting Thread Configuration S1 1-1/16-1 UN-B /8 x 16 x /8 N1 / -1 NPTF-1 /8 x 16 x /8 G1 G/ BSPP /8 x 16 x /8 8

8 CS Series Specifi cations Pressure Ratings: Maximum Allowable Operating Pressure (MAOP): psi (. bar) Fatigue: psi (7.6 bar) 1,, cycles: - psi Design Safety Factor:.:1 Operating Temperatures: Nitrile: -ºF to ºF (-ºC to 17ºC) Fluorocarbon: -1ºF to ºF (-6ºC to 17ºC) Element Collapse Rating: 1 psid (1. bar) Weights (approximate): CS lbs. (.7 kg) 1.88 [7.8 mm].9 [ mm] OUTLET MOUNTING HOLES SEE CHART Materials: Head: cast aluminum Bypass valve: nylon with steel spring Filter element: reinforced polymer end caps, microglass media, and polymer pleat support Bowl: cast aluminum Permanent core: steel 1.88 [7.8 mm].9 [.9 mm] INLET. [11. mm]. [ 7. mm] LEFT SIDE INDICATOR LOCATION (IF USED) 1. [9.1 mm] PORT OPTIONS: SEE CHART BOTH PORTS IDENTICAL.6 [11. mm] O.D. OUTLET INLET RIGHT SIDE INDICATOR LOCATION (IF USED) INLET OUTLET PARKER LABEL [.7 1. mm] BOWL TORQUE: - FT-LBS [ Nm].8.6 [ mm] Port Option Port Thread Mounting Thread Configuration S16 1-/16-1 UN-B /8 x 16 x /8 S 1-/8-1 UN-B /8 x 16 x /8 S 1-7/8-1 UN-B /8 x 16 x /8 N NPT -1 /8 x 16 x /8 N 1-1/ -11. NPTF-1 /8 x 16 x /8 N 1-1/ -11. NPTF-1 /8 x 16 x /8 G G1-1/ BSPP M1 x 1. x [8.1 mm] MINIMUM ELEMENT REMOVAL CLEARANCE 1.6 [7. mm] NOMINAL HEX OPTIONAL DRAIN PLUG SAE- IAW SAE J1 TORQUE 1-1 FT-LBS. [ Nm] Drawings are for reference only. Contact factory for current version. 8

9 1CS/CS Series Element Condition Indicators 1. Electrical Switch - Connector: 1 wire leads, 18 Gauge - Yellow (NC), black (NO), Red (C) - Maximum switching voltage: V (DC/AC) - Maximum switching current.a - Maximum carry current:.a - Approvals: CE, IP68. Analog Sensor - Supply voltage:. to. VDC - Main output current: 1 ma - Output voltage: Ratiometric (see graph) - Approvals: CE, IP68 - Connector: 1 wire leads, 18 Gauge Yellow (analog out) Black (OV) Red (supply + V) Electrical Switch or Analog Sensor VOLTS. V Visual Indicator. V. Visual Indicator - Push to test - Battery operated - Visual LED 6.8 MIN. FINISH REQUIRED ON MANIFOLD SEALING FACE Suggested Manifold Mounting Arrangement (Consult Factory for Application Specifics) Ø.766 ±. OUTLET Manifold Block by Customer Ø.69 ±. INLET (S) ANY PLACE ON B.C. CENTERED BETWEEN BOLT LOCATIONS 1CS Adaptor Mounting Arrangement 1/- UNC - B.6 MIN FULL THD. DEPTH PLCS EQUALLY SPACED ON Ø 1.8 B.C. Drawings are for reference only. Contact factory for current version. 6.7 MIN FINISH REQUIRED ON MANIFOLD SEALING FACE 1.7. OUTLET. ID INLET CONSTRUCTION ZONE.6 OD INLET CONSTRUCTION ZONE CS Adaptor Mounting Arrangement /8- UNF - B.7 X 8.6 MIN. THD. DEPTH PLACES ON Ø. B.C. Ø.68 ±. INLET(S) ANY PLACE IN CONSTRUCTION ZONE CENTERED BETWEEN BOLT LOCATIONS Manifold Adaptor Kits* Media E QE 1QE E 1CS CS * Kit includes O-rings, adaptor, mounting screws, element and bowl. 8

10 1CS/CS Series Service Instructions Filter element should be replaced as indicated by filter indicator or at specified service intervals recommended by the OEM. Replacement element procedure A. Shut down system and release pressure in the filter line. B. Loosen bowl and remove rotating counter clockwise. C. Remove dirty element from filter head and discard. D. Lubricate element seals on clean element and install on filter head element locator. E. Install reuseable bowl onto element and filter head. Tighten to specified torque. 1 Parts List Index Description 1CS CS 1 Head Assembly ( PSI electrical switch indicator ready) SAE-1 99 / NPT 9 G/ BSPP 91 SAE SAE- 96 SAE NPT / NPT / NPT 96 G1 1/ BSPP 96 Indicator Electrical Analog Mounting Screws Element (see chart on next page) Bowl Assembly Single - no drain 911 Single - w/ drain 91 Double - no drain 9 Drain Plug SAE- Nitrile 9188 Fluorocarbon Bypass (not shown) psid Manifold Adaptor Kit (see drawing on previous page) O-Ring (I.D.) V9 V71 O-Ring (O.D.) V98 V71 Manifold Adaptor Mounting Screws Element see chart on page 8 Bowl Assembly see # above 86

11 1CS/CS Series How to Order Select the desired symbol (in the correct position) to construct a model code. Example: BOX 1 BOX BOX BOX BOX BOX 6 BOX 7 BOX 8 1CS 1QE B N K S1 1 BOX 1: Filter Series Symbol Description 1CS nominal CS nominal BOX : Element Length Symbol Description 1 Single (CS model only) Double (1CS model only) BOX : Media Code Symbol Description E Ecoglass III, micron QE Ecoglass III, micron 1QE Ecoglass III, 1 micron E Ecoglass III, micron BOX : Seals Symbol Description B Nitrile (NBR) V Fluorocarbon (FKM) BOX : Indicator Symbol Description N None M 1 Visual indicator w/push to test, right ML E 1 EL A 1 AL Visual indicator w/push to test, left Electrical w/1 flying leads, right Electrical w/1 flying leads, left Analog w/1 flying leads, right Analog w/1 flying leads, left BOX 6: Bypass Symbol Pressure Setting K PSI (. bar) BOX 7: Ports Symbol Description 1CS S1 SAE-1 integral threads N1 ¾ NPT integral threads G1 G¾ BSPP (ISO 8) CS S16 SAE-16 S SAE- S SAE- N16 1 NPT N 1¼ NPT N 1½ NPT G G1¼ BSPP (ISO 8) BOX 8: Options Symbol Description 1 None Drain port on bowl (CS only) Please note the bolded options reflect standard options with a reduced lead-time. Consult factory on all other lead-time options. Notes: 1. Consult factory. Global products as identified are offered worldwide through all Parker locations and utilize a common ordering code. Replacement Elements (Ecoglass) Filter Model (Nitrile Seals) Filter Model (Fluorocarbon Seals) Media 1CS- CS-1 1CS- CS-1 E 976Q 9816Q 97619Q 9881Q QE 976Q 9817Q 97618Q 988 1QE 976Q 9818Q 97617Q 988Q E Q Q 87

12 IL8 Series Medium Pressure Filters 88

13 IL8 Series Applications Applications for IL8 series filters Lube oil systems Power generation plants Test stands Primary metal equipment Pulp & paper equipment Offshore drilling and oil patch Flushing skids IL8 series filters are excellent choices for your demanding applications whether you require simplex, duplex or quadplex assemblies. Wherever high flow or high capacity filters are required, the IL8 series can be applied with confidence. Filter housings have a simple yet critical job... securely contain the filter element with positive internal sealing. The IL8 series filter housings are the result of careful engineering. High grade materials are used to provide strength at critical stress points. The cover and base are annodized aluminum, the handle is nickel plated ductile iron and the bowl is rugged carbon steel. The result is a reliable high performance filter for an array of applications. Cover Handle protects indicators from damage Easy on, easy off, for fast service Indicators You can tell element condition at a glance Both visual and electrical available Drain Port (not visible) Clean and easy servicing Lets you drain bowl of fluidbefore element changes Air Bleed Helps protect bearings and other sensitive components from trapped air Fill Port Prefilter the fluid, before it gets into the machine s system Purge air while filling Bowl Rugged cold drawn steel excellent fatigue resistance Three sizes for any application: Single (8 ), Double (16 ), and Triple (9 ) Ports SAE straight thread or flange face Bypass Valve (not visible) Soft seat design for zero internal leakage Located in cover assembly 89

14 IL8 Series Element Features Ecoglass III Replacement Elements Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements feature 1% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (6% less weight) for easier servicing. The Ecoglass III elements utilize the same proprietary media design as our Microglass III line of replacement elements. Reusable core Non-metallic Ecoglass III element assembly With Ecoglass III, a reusable core is installed into the filter housing and remains in service throughout the life of the assembly. Microglass III Replacement Elements Microglass III represents a leap forward in the performance obtainable in hydraulic and lube filter elements. The unique multi-layer design combines high efficiencies with exceptional dirt holding capacities for performance that is unequalled in the industry today. This performance is further enhanced in the IL8 series with the introduction of the deep pleat design. The deep pleat element design increases the amount of media in the element and therefore capacity. With Microglass III you do not have to make a compromise between efficiency and capacity, you can have both. 9

15 IL8 Series IL8-1 Element Performance Beta Rating 1 Efficiency Efficiency % 1 Capacity 1 1 Q 1Q Q 1Q Micron Size (c) Capacity grams 1 Results typical from Multi-pass tests run per test standard ISO gpm to 6 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS Empty Housing SAE Q 1Q SAE- SAE- Flange Face SAE-½ Flange Face

16 IL8 Series IL8- Element Performance Beta Rating 1 Efficiency Efficiency % 6 Capacity 1 Q 1Q 99.9 Q 1Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO gpm to 6 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS Q 1Q SUS Empty Housing SAE- SAE- SAE- Flange Face SAE-½ Flange Face

17 IL8 Series IL8- Element Performance Beta Rating 1 Efficiency Q Efficiency % 6 Q 1Q Capacity 1 1Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO gpm to 6 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS Q 1Q SUS Empty Housing SAE- SAE- SAE- Flange Face SAE-½ Flange Face

18 IL8 Series Specifi cations: IL8/LL8 Pressure Ratings: Maximum Allowable Operating Pressure (MAOP): psi (. bar) Rated Fatigue Pressure: psi (.8 bar) Design Safety Factor: :1 Element Removal Clearance Single 6. Double Triple Operating Temperatures: Buna: - o F (- o C) to o F (17 o C) Fluorocarbon: -1 o F (-6 o C) to 7 o F (1 o C) Element Collapse Rating: 1 psid (1. bar) Element Condition Indicators: Visual (optional) Electrical -heavy duty (optional) SPDT. amps (resistive) MAX watts 1 to 8 VDC & 11 to 17 VAC Note: Product of switching voltage and current must not exceed wattage rating Single Double 6± ±. 6±7.71±. Color Coding: White (common) Black (normally open) Blue (normally closed) Triple 19±7 7.61±. Materials: Bowl: low carbon steel Cover: anodized aluminum Handle: nickel plated ductile iron Base: anodized aluminum Inlet IL8 Outlet Shipping Weights (approximate): Single: lbs. (18.1 kg) Double: lbs. (.7 kg) Triple: 7 lbs. ( kg). 1.1 LL8 Outlet Drawings are for reference only. Contact factory for current version M H1 H H * Linear Measure: millimeter inch 6± 9.8± UNC- B x.7 Deep Min. Mounting Holes, Total *

19 IL8 Series Specifi cations: HDIL8/HQIL8 Pressure Ratings: Maximum Allowable Operating Pressure (MAOP): psi (7.6 bar) Rated Fatigue Pressure: psi (.8 bar) Design Safety Factor:.:1 Operating Temperatures: -1 o F (-6 o C) to o F (9 o C) Element Collapse Rating: 1 psid (1. bar) Materials: Changeover valve: steel Bowl: low carbon steel Cover: anodized aluminum Cover handle: nickel plated ductile iron Base: steel Element Condition Indicators: Visual (optional) Electrical-heavy duty (optional) SPDT. amps (resistive) MAX watts 1 to 8 VDC & 11 to 17 VAC Note: Product of switching voltage and current must not exceed wattage rating Color Coding: White (common) Black (normally open) Blue (normally closed) Shipping Weights (approximate): HDIL8- lbs. (1 kg) HDIL8-7 lbs. (17 kg) HQIL8- lbs. (8 kg) HQIL8-6 lbs. (9 kg) Ansi Flange Adapter End, Side View Linear Measure: millimeter inch Changeover Valve Flow vs. Pressure Loss Pressure Drop PSI Flow SUS Valve SUS Valve Valve SUS SUS Valve Valve SUS Valve....1 Pressure Drop Bar Flow 9

20 IL8 Series Specifi cations: HDIL8/HQIL8 Linear Measure: millimeter inch 17.. HDIL8 Top View MOUNTING HOLES.66 DIA THRU 16 TOTAL EQUALIZING VALVE ½ SAE-8 STR THD FILL PORT. TORQUE - FT-LBS ¼ SAE- STR THD VENT PORT. TORQUE 1-1 FT-LBS. OPTIONAL ANSI FLANGE ADAPTER (-) (-) MINIMUM ELEMENT RE- MOVAL CLEARANCE COVER HANDLE TORQUE: HAND TIGHT H STYLE SHOWN TORQUE - FT-LBS 18 HANDLE ROTATION FOR CHANGE OVER M STYLE SHOWN TORQUE - FT-LBS HDIL8/HQIL8 Side View (-) (-) (-) (-) 1 SAE-16 STR THD DRAIN PORT TORQUE: 8-1 FT-LBS STANDARD SAE PORTING ¼ SAE- STR THD VENT PORT TORQUE 1-1 FT.-LBS EQUALIZING VALVE HQIL8 Top View ½ SAE-8 STR THD FILL PORT TORQUE - FT.-LBS Drawings are for reference only. Contact factory for current version. OPTIONAL ANSI FLANGE ADAPTER MOUNTING HOLES.66 DIA THRU 16 TOTAL 96

21 IL8 Series Element Servicing Instructions: IL8 When servicing the IL8/LL8 filter, use the following procedure: Top View 1. Stop the system s power unit.. Relieve pressure in the filter line. Drain fluid from housing if desired.. Rotate cover handle counter-clock wise. Carefully lift and remove the cover.. Remove element from the housing. Discard all disposable elements as they are not cleanable. With Ecoglass III elements the permanent core will remain in the housing.. Place new element in housing, centering it on the element locator in the bottom of bowl. 6. Inspect cover o-ring and replace if necessary. 7. Install cover, rotate clockwise and hand tighten. IL8 Outlet 7 Torque FT LBS Torque 1 1 FT LBS Optional indicator (Visual or Blank Only) Location IL8, LL8 Torque 7 FT LBS Parts List Index Description Nitrile P/N Fluorocarbon P/N Handle Torque Hand Tight 1 Cover Assembly psi bypass w/indicator port psi bypass w/indicator port No bypass w/indicator port Cover o-ring N77 V77 Indicators P option-indicator port plug M PSI M PSI H PSI H PSI H PSI H PSI H PSI H PSI not shown Elements (See chart on model code page) Bleed (vent) Plug, SAE Fill Plug, SAE not shown Drain Port Plug, SAE Base O-ring N76 V76 Flange Kits (optional) 1 ½ NPTF (w/ flange face only) NPTF (w/ flange face only) SAE- (w/ flange face only) ½ socket weld (w/½ flange face only) SAE- (w/½ flange face only) ½ NPTF (w/½ flange face only) Indicator location LL8 only LL8 outlet IL8/LL8 inlet NOTE: The ½ Flange Face Kits include the minimum width SAE J18 Code 61 Flanges. Drawings are for reference only. Contact factory for current version. 97

22 IL8 Series Element Servicing Instructions: HDIL8/HQIL8 The system does not need to be shut down to service the elements. 1. Red arrow on operating handle points to on-duty chamber(s).. Open off-duty vent plug(s). Do not thread out completely.. Open the pressure equalizing (fill line) valve slowly to admit fluid to the off-duty chamber(s).. When fluid is discharged from the off-duty vent plug(s), close and tighten.. Turn the T handle, on the center valve section, counter-clockwise turns. 6. Depress the operating handle to unseat the seal shoes, then rotate 18 and return handle upward into the opposite slot. Index Description 1 Cover Assembly psi bypass w/indicator port psi bypass w/indicator port No bypass w/indicator port Parts List HDIL8 HQIL8 Nitrile Fluorocarbon Nitrile Fluorocarbon Turn the T handle fully clockwise and hand tighten only. This will seat the shoes. 8. Close the pressure equalizing valve. 9. Red arrow now points to the new on-duty chamber(s). 1. Open the new off-duty vent plug(s). 11. Remove the new off-duty chamber cover(s) by rotating counter-clockwise. 1. Remove the new off-duty drain plugs and drain chambers to desired level. 1. Follow steps - 7 on opposite page. 1. Close and tighten the vent plug(s). Warning: You should not rotate the handle until you equalize the pressure Cover O-ring N77 V77 N77 V77 Indicators P option-indicator port plug M psi M psi H psi H psi H psi H psi H psi H psi Elements (see chart on model code page) Bleed (vent) Plug SAE Fill Plug SAE Drain Plug SAE Transfer Valve SAE SAE 9 Housing Assembly Double length Triple length /8-11 x SHCS /8 Lock Washer Adapter Block Kit (block, o-rings, 1 bolts) 98 1 Flange Adapter Kit (flange, o-ring, bolts) SAE lb. flange SAE lb. flange Seal Kit Transfer Valve Consult factory Consult factory 1 Seal Kit Housing Assembly Consult factory Consult factory 16 Equalizing Valve Consult factory Consult factory

23 IL8 Series How to Order BOX 1 BOX BOX BOX BOX BOX 6 BOX 7 BOX 8 BOX 9 HDIL8 R E HM QQ 1 BOX 1: SEALS Symbols None F BOX : Basic Assembly Symbols IL8 LL8 HDIL8 HQIL8 BOX : Basic Assembly Symbols Description Nitrile Fluorocarbon Please note the bolded options reflect standard options with a reduced lead-time. Consult factory on all other lead-time options. Global products as identified are offered worldwide through all Parker locations and utilize a common ordering code. Description In-line 9 o angle porting Duplex Quadplex Description 1 Single length Double length Triple length BOX : Core Symbols None* R *Single length only Description Disposable core Reusable core Microglass III (Fluorocarbon) BOX : Element Media Symbols E 1QE QE E 1Q Q BOX 6: Indicators Symbol Description Description Ecoglass III Ecoglass III Ecoglass III Ecoglass III Microglass III Microglass III Microglass III Microglass III Note: Microglass III elements only available in single length, and must utilize. P Port plugged M Visual auto reset H Electrical w/ conduit connection H Electrical w/ DIN 6 connector H Electrical w/ -pin ANSI/B 9.M connector E Electrical/Visual (w/ ½ NPT conduit connection and wire leads) Note: Two symbols required, first is for housing, the second is for the cover(s). Electrical indicators only available on the housing Replacement Elements BOX 7: Bypass & Indicator Setting Symbols Description psid psid XX No indicator and blocked bypass BOX 8: Ports Symbols Description Ecoglass III (Fluorocarbon) Media Single Double Triple Media Single Double Triple 9999Q 97Q 987Q E 987Q 976Q 1Q 97661Q 96Q 987Q 1QE 986Q 97Q Q 97861Q 9Q 987Q QE 98Q Q 9Q 987 E 98Q 97Q WR Reuseable Core PP RR YY ZZ* WW QQ BOX 9: Option Symbols IL8/LL8 SAE- straight thread SAE- straight thread SAE flange face SAE -½ flange face * Note: IL8 outlet port requires minimum width SAE J18 code 61 flange. HDIL8/HQIL8 SAE flange face (code 61) SAE flange face(code 61 Description 1 None 11 Blocked bypass 99

24 1//8CN Series Coreless Medium Pressure Filters 1

25 1//8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment Pilot Lines For Servo Controls Oil Patch Drilling Equipment Injection Molding This partial list of applications for Parker CN series filters has a common factor, the need for an economical, medium pressure range filter with excellent fatigue pressure ratings. Prior to the availability of the CN filter, applications such as those listed were restricted by limitations of a spin-on can, or forced into the higher cost range of high pressure filters. The CN series fills this gap, and now with the newly increased fatigue rating from to 8 psi, the applications are expanded. Ecoglass III Replacement Elements Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements feature 1% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (6% less weight) for easier servicing. The Ecoglass III elements utilize the same proprietary media design as our Microglass III line of replacement elements. With Ecoglass III, a reusable core is installed into the filter housing and remains in service throughout the life of the assembly. Features Advantages Benefits 8 psi fatigue rating Ability to provide reliable service Reduced downtime due to premature (eight times that of a spin-on) under tough cyclic operating conditions filter failures Can be utilized in applications where high Reduced costs, better fit pressure filters may have been only option for the application Diametral (side) seal between Proven reliability in cyclic applications No downtime, no leaks head and bowl Reduced importance of bowl torque Performs with real world service Dust Seal Prevents contamination from building Easier service, no galling up on bowl / head threads Cast aluminum head Low profile, lightweight and durable Less weight, smaller envelop and cleaner appearance Standard Ecoglass III elements Multi-layered design produced high Great performance value capacity and efficiency Reliable performance throughout Reduces pleat bunching, element life keeps performance consistent Reduces downtime, maximizes element life Complete performance data disclosure All pertinent information is provided in No hidden deficiencies an easy-to-compare format Easy selection of proper filtration Visual, electrical or electrical/visual Check element condition at a glance Optimize element life, prevent bypassing indicators available Right style for the application Matches your system electrical connections 11

26 1//8CN Series Features Ports SAE, NPT or flange face (8CN) provides mounting flexibility. Element Condition Indicators Available in visual or electrical, with a choice of several power connections (E shown). Head Cast aluminum is rugged with small profile for easy mounting. Diametral (side) Seal Dust Seal Protects head and bowl threads from external contamination buildup. Bypass Cartridge style bypass has good sealing characteristics and low hysteresis. Choice of two settings to match application needs. Element Assembly High efficiency (Bx>), high capacity Ecoglass III media with it s multi-layered design is unequalled in performance. Bowl Aluminum is lightweight and corrosion resistant. Drain Port (optional) Optional drain port allows for easy element servicing. 1

27 1CN Series 1CN-1 Element Performance Beta Rating 1 Efficiency Efficiency % 1 Capacity 1 Q 1Q Q 1Q Micron Size (c) Capacity (grams) 1 Results typical from Multi-pass tests run per test standard ISO 1 gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1. 1SUS EMPTY HOUSING 1. Q 1 1Q ¾ Nominal Port Size 1 Nominal Port Size

28 1CN Series 1CN- Element Performance Beta Rating 1 Efficiency Efficiency % 1 Capacity 1 1 Q 1Q Q 1Q Micron Size (c) Capacity (grams) Results typical from Multi-pass tests run per test standard ISO 1 gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1. 1 SUS EMPTY HOUSING Q Q ¾ Nominal Port Size 1 Nominal Port Size

29 CN Series CN-1 Element Performance Beta Rating 1 Efficiency Efficiency % 1 Capacity Q Q Q 1Q Micron Size (c) 1 Capacity grams 1 Results typical from Multi-pass tests run per test standard ISO 1 gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1. 1 SUS EMPTY HOUSING Q 1Q Nominal Port Size 1½ Nominal Port Size

30 CN Series CN- Element Performance Beta Rating 1 Efficiency Efficiency % 1 Capacity 1 1 Q 1Q Q 1Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1 SUS 1. EMPTY HOUSING Q 1Q Nominal Port Size 1½ Nominal Port Size

31 CN Series CN- Element Performance Beta Rating 1 Efficiency Efficiency % 1 Capacity 1 1 Q 1Q Q 1Q Micron Size (c) Capacity (grams) 1 Results typical from Multi-pass tests run per test standard ISO gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss 1 1 1SUS SUS Empty Housing Q 1Q " Nominal Nominal Port Port Size Size 1½" Nominal Port Port Size Size

32 8CN Series 8CN-1 Element Performance Beta Rating 1 1 Efficiency Q 1Q Efficiency % Capacity Q 1Q Micron Size (c) Capacity grams 1 Results typical from Multi-pass tests run per test standard ISO gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO Flow vs. Pressure Loss SUS SUS Empty Housing Q 1Q ½ Nominal Port Size Nominal Port Size

33 8CN Series 8CN- Element Performance Beta Rating 1 1 Efficiency Q 1Q Efficiency % Capacity Q 1Q Micron Size (c) Capacity grams 1 Results typical from Multi-pass tests run per test standard ISO 7 gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1. 1 SUS Empty Housing Q 1Q ½ Nominal Port Size Nominal Port Size

34 1//8CN Series Specifi cations Maximum Allowable Operating Pressure (MAOP): 1 psi (69 bar) Rated Fatigue Pressure: 8 psi (. bar) Design Safety Factor:.:1 Operating Temperatures: Nitrile: - F (- C) to F (17 C) Fluorocarbon: -1 F (-6 C) to F (11 C) Element Collapse Rating: Standard: 1 psi (1. bar) Drawings are for reference only. Contact factory for current version. Materials: Head and Bowl: Aluminum Indicators: Alum. body, plastic connectors Bypass: Nylon Weights (approximate): Model Single length Double length 1CN. lb. (1.1 kg). lb. (1.6 kg) CN. lb. (. kg). lb. (.9 kg) 8CN 1. lb. (.6 kg) 1. lb. (6.89 kg) Element Condition Indicators: Visual 6 green/red auto reset Electrical/Visual VAC, 8VDC E NO NC C E Electrical-Heavy Duty.A(resistive) MAX watts 1 to 8 VDC & 11 to 17 VAC Color code: White (common) Black (normally open) Blue (normally closed) NC C NO Dimensions are in (mm) A B C D E F G H I J K L M 1CN CN 8CN 6.17 (16.6) 6.7 (17.8) 11.6 (8.9) 9.87 (.7) 1. (6.) 1.81 (1.6) 1.8 (6.). (6.).6 (77.7) 1.9 (.) 1.8 (.6) 1.9 (9.).8 (71.1). (17.).91 (1.8).8 (8.9). (17.) 6. (18.7).88 (7.).7 (111.). (8.6). (8.6).8 (11.9).96 (11.) 1. (88.1). (6.). (11.6).9 (.9) 1. (1.8) 1.6 (1.1) 1.69 (.9). (8.8).1 (79.) 1. (6.6).7 (6.) 1.6 (1.) NA 1.7 (8.8) NA 1CN H I Mounting Holes 1/ - UNC x.8 (7.1) CN H J Mounting Holes /16-18 UNC x. (1.7) 8CN H J Mounting holes /16-18 UNC X 6 (16.) F L F L L F G K G K G K J Torque - ft. lbs. I I Torque - ft. lbs. M, E, E-.8 (6.) H-.1(8.1) H1-.8 (6.) D M, E, E-.8 (6.) H-.1(8.1) H1-.8 (6.) D M, E, E-.6 (77.7) H-.9 (99.8) H1-. (81.) D C C C Single Length A Double Length B Torque 1 - ft. lbs. Single Length A Double Length B Triple Length M Torque - ft. lbs. Single Length A Double Length B Torque 6-7 ft. lbs. Element Removal Clearance. (6.) 1. (.) Nominal Hex E SAE - Drain Plug Element Removal Clearance. (6.) 1. (.) Nominal Hex E SAE - Drain Plug Element Removal Clearance. (1.) 1. (.) Nominal Hex E SAE- Drain Plug 11

35 1//8CN Series Element Service Instructions 6 9 A. Stop the system s power unit. B. Relieve any system pressure in the filter line. C. Drain the filter bowl if drain port option is provided. D. Loosen and remove bowl. E. Remove element by pulling downward with a slight twisting motion and discard. F. Check bowl o-ring for damage and replace if necessary. G. Lubricate element o-ring with system fluid and place on post in filter head. H. Install bowl and tighten to specified torque. 1CN - 1- ft. lbs CN - - ft. lbs 8CN ft. lbs I. Confirm there are no leaks after powering the system Parts List Index Description 1CN CN 8CN 1 Head / NPT bypass/ indicator ready 986 / NPT no bypass/ no indicator 9877 / NPT no bypass/ indicator ready 9869 / NPT no indicator/ bypass ready 987 SAE-1 bypass/ indicator ready 986 SAE-1 no bypass/ no indicator 987 SAE-1 no bypass/ indicator ready 9867 SAE-1 no indicator/ bypass ready NPT bypass/ indicator ready NPT no bypass/ no indicator NPT no bypass/ indicator ready NPT no indicator/ bypass ready SAE-16 bypass/ indicator ready SAE-16 no bypass/ no indicator SAE-16 no bypass/ indicator ready SAE-16 no indicator/ bypass ready / NPT bypass/ indicator ready / NPT no bypass/ no indicator / NPT no bypass/ indicator ready / NPT no indicator/ bypass ready SAE- bypass/ indicator ready SAE- no bypass/ no indicator SAE- no bypass/ indicator ready SAE- no indicator/ bypass ready NPT bypass/ indicator ready 9 NPT no bypass/ no indicator 96 NPT no bypass/ indicator ready 9 NPT no indicator/ bypass ready 9 SAE- bypass/ indicator ready 9 SAE- no bypass/ no indicator 9 SAE- no bypass/ indicator ready 9 SAE- no indicator/ bypass ready 97 Flange face, SAE bypass/indicator ready 91 Flange face, SAE no bypass/no indicator 919 Flange face, SAE no bypass/indicator ready 917 Flange face, SAE no indicator/bypass ready 91 Indicators M-Visual auto reset/ psi M-Visual auto reset/ psi H-Electrical/ psi w/ 1/ conduit connection H-Electrical/ psi w/ 1/ conduit connection H1-Electrical/ psi w/ wire leads H1-Electrical/ psi w/ wire leads Not Shown: E-Electrical/Visual psi w/ wire leads E-Electrical/Visual psi w/ wire leads E-Electrical/Visual psi w/ DIN connection E-Electrical/Visual psi w/ DIN connection E-Electrical/Visual psi w/ -pin connection E-Electrical/Visual psi w/ -pin connection Bypass Valve psid assembly psid assembly Not Shown: No bypass plug Element (see model code page) 8 Bowl Single length Double length Triple length Bowl and Dust Seal Buna N (Nitrile) N71 N79 N7 Fluorocarbon V71 V79 V7 1 Drain Plug - SAE- Buna N (Nitrile) Fluorocarbon

36 1//8 CN Series How to Order Select the desired symbol (in the correct position) to construct a model code. Example: BOX 1 BOX BOX BOX BOX BOX 6 BOX 7 BOX 8 CN 1 1QE B M K N BOX 1: Filter Series Symbol Description 1CN In line Filter CN In line Filter 8CN In line Filter BOX : Element Length Symbol Description 1 Single Double Triple (CN only) BOX : Media Code Symbol Description E Ecoglass III, micron QE Ecoglass III, micron 1QE Ecoglass III, 1 micron E Ecoglass III, micron BOX : Seals Symbol Description B Nitrile (NBR) E Ethylene propylene (EPR) V Fluorocarbon (FKM) BOX : Indicator Symbol Description M Visual Automatic Reset H Electrical indicator with ½ -1 NPT connection and 1 leads E Electrical/Visual with ½ NPT conduit connection and wire leads E Electrical/ Visual (DIN6 Hirschman style connection) E Electrical/Visual (ANSI B.9M -pin Brad Harrison style connection) P Plugged indicator port BOX 6: Bypass Symbol Pressure Setting G PSI (1.7 bar) K PSI (. bar) BOX 7: Ports Symbol Description 1CN N1 ¾ NPT N16 1 NPT S1 SAE-1 straight thread S16 SAE-16 straight thread N16 N S16 S N N S S Y CN 1 NPT 1½ NPT SAE-16 straight thread SAE- straight thread 8CN 1½ NPT NPT SAE- straight thread SAE- straight thread Flange face, SAE-, Code 61 BOX 8: Options Symbol Description Standard drain port on bowl 1 No bypass and drain port Please note the bolded options reflect standard options with a reduced lead-time. Consult factory on all other lead-time options. Replacement Elements (Ecoglass) MEDIA 1CN-1 1CN- CN-1 CN- CN- 8CN-1 8CN- E 9671Q 967Q 9679Q Q 9671Q 96719Q 1QE 967Q 967Q 9678Q 9661Q Q QE 96699Q 967Q 9677Q 96711Q 966Q 9671Q 96717Q E 96698Q Q 9671Q Q 96716Q Global products as identified are offered worldwide through all Parker locations and utilize a common ordering code. 11

37 MPD Series Medium Pressure Filters 11

38 MPD Series Applications - Circulating Lube Oil Systems - Power Generation Control Systems - Steel Mill Control Systems - Pulp & Paper Control Systems - Test Stands - Automotive Stamping Presses - Offshore & Land Based Oilfield Applications MPD series filters are an outstanding choice for today s demanding hydraulic control and circulating oil systems. The MPD s innovative modular design, rugged ductile iron construction and coreless element technology, combined with many other features, provide solutions across a broad range of industrial applications. The Modular design provides user flexibility for simplex or duplex applications. Incorporating side chambers as simplex filters along with duplex installations provide common elements across the circuit design. Construction features like full ported transfer valve with neutral center flow capability offer tremendous benefit in cold start conditions. Standard features like pressure sensing taps, vents, drains and internal pressure equalization make this product incomparable in industry. 11

39 MPD Series Features Cover /Bypass Valve Assembly Vents Dust Seal Permanent Core Transfer Valve Assembly Modular Housing Design Coreless Element Technology Pressure Taps Element Condition Indicators Drains Ports ( ANSI Shown) 11

40 MPD Series MPD-1 Element Performance Beta Rating 1 1 Efficiency Q 1Q Efficiency % Capacity Q 1Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1. 1SUS Q.. 1Q Empty Housing

41 MPD Series MPD- Element Performance Beta Rating 1 1 Efficiency Q 1Q Efficiency % Capacity Q 1Q Micron Size (c) 1 1 Capacity grams Results typical from Multi-pass tests run per test standard ISO 8 gpm to 1 psid terminal - 1 mg/l BUGL Refer to Appendix on pages 6-6 for relationship to test standard ISO 7. Flow vs. Pressure Loss SUS 1. 1 SUS Empty Housing Q 1Q Empty Housing

42 MPD Series Replacement Elements Ecoglass III represents the merging of high performance filtration technology with environmentally conscious engineering. The Ecoglass III line of replacement elements features 1% non-metallic construction. The design reduces solid waste and minimizes disposal costs for industry. The non-metallic construction means lightweight elements (6% less weight) for easier servicing. The Ecoglass III elements utilize the same proprietary media design as our Microglass III line of replacement elements. With Ecoglass III, a reuseable core is installed into the filter housing and remains in service throughout the life of the assembly. Reusable core Non-metallic Ecoglass III element assembly Microglass III Replacement Elements Microglass III represents a leap forward in the performance obtainable in hydraulic and lube filter elements. The unique multi-layer design combines high efficiencies with exceptional dirt holding capacities for performance that is unequalled in the industry today. This performance is further enhanced in the MPD series with the introduction of the deep pleat design. The deep pleat element design increases the amount of media in the element and therefore increases capacity. With Microglass III, you do not have to make a compromise between efficiency and capacity; you can have both. Feature Advantage Benefit Modular design filter Use a simplex or duplex Reduced installation due to common elements Application flexibility Top access cover Remove element from top No oil mess Lighter than removing entire bowl Visual and electrical indicators Know exactly when to service elements Keeps system clean Drain port Drain all oil from assembly prior Eliminates cross contamination to servicing Vent port Purges all trapped air in filter Get the maximum performance from elements Prevents a spongy system Multipass tested elements Element performance backed Elements selected will have (per ANSI/NFPA T R1-199) by recognized test standards consistent performance levels Option of Ecoglass III or Multi-layer media High capacity with high efficiency Microglass III elements Coreless as standard No performance loss from HF as option pleat bunching Equalizing valve & manifold No external plumbing Safety & reliability Upstream & downstream Add additional instrumentation Product flexibility sensing ports 118

43 MPD Series Specifi cations Specifications: MPD Series Pressure Ratings: Maximum Allowable Operating Pressure (MAOP): psi (6.9 bar) SAE port MPDH only 1 psi (81.6 bar) SAE port; psi ( bar) ANSI port Rated Fatigue Pressure: psi (6.9 bar) SAE port MPDH only 1 psi (81.6 bar) SAE port; psi ( bar) ANSI port Design Safety Factor: :1 *Consult factory for higher operating pressures Operating Temperatures: -1 o F (-6 o C) to 16 o F (71 o C) *Consult factory for temperatures outside specified range Element Collapse Rating: Standard: 1 psid (1. bar) High collapse Microglass only: 1 psid (81.6 bar) (SAE); psid ( bar) (ANSI) Materials: Transfer Valve: Ductile Iron Side Chamber: Ductile Iron Side Chamber Extension: Steel Cover: Ductile Iron (MPD), Carbon Steel (MPDH) Equalizing Valve and Manifolds: Steel Shipping Weights (approximate): MPD-1: 1 lbs. (98 kg) MPD-: 8 lbs. (19 kg) Element Condition Indicators: Type M Series: Visual, auto-resetting with a red indication at the designated differential pressure. In the clean condition, indication is green. Type E Series: Electrical/Visual, auto-resetting with a red indication at the designated differential pressure. In the clean condition, indication is green. Rated Amps at 1/ VAC; Amps resistive, amps inductive (sea level) at 8 VDC; SPDT. E SERIES ELECTRICAL INDICATOR CONNECTOR CHART CONNECTOR MODEL CODING WIRING / MALE CONNECTOR DIN 6 POLE + EARTH E DIN PLUG PIN CODE PIN ANSI/B9.M E (DIMENSIONS ONLY) NO NC NC C C NO Type H Series: Heavy duty electrical/no visual, rated. Amps resistive, 1 to 8 VDC and. Amps resistive, VAC; watts; SPDT. H SERIES ELECTRICAL INDICATOR CONNECTOR CHART CONNECTOR MODEL CODING WIRING / MALE CONNECTOR ½ -1 NPT CONDUIT ADAPTER H BLACK (NO), W/ WIRE LEADS (FOR ALL BLUE (NC), LIGHT TO HEAVY CONDUIT USES) AND WHITE (C) NONE: 1 WIRE LEADS ONLY H1 BLACK (NO), BLUE (NC) AND WHITE (C) No indicator P option: plugged indicator port. Contact factory for other available indicator options & types. Element Servicing Instructions: MPD The system does not need to be shut down to service elements; however, pressure must be equalized at both side chambers of the duplex filter before performing transfer valve changeover. 1. Black flow arrow on top of the transfer valve points to the on-duty chamber.. Open the equalizing valve (counter-clockwise) to balance pressure at the side chambers.. Shift directional lever on the ratchet handle to switch the ratchet direction.. Pull detent ring up to disengage the locking pin and allow handle to rotate.. Rotate ratchet handle back and forth over the inlet port until the transfer valve is fully shifted and the detent locking pin engages. 6. Slack flow arrow now points to the new on-duty side chamber. 7. Close equalizing valve (clockwise) to isolate the side chambers. 8. Loosen new off-duty vent plug (counter-clockwise) approximately turns. Do not thread out complete. 9. Remove drain plug (counter-clockwise) tram new off-duty chamber to lower oil level. 1. Remove new off-duty chamber cover by rotating (counter-clockwise) until unthreaded then lift from chamber. 11. Pull element out from chamber. Discard used disposable elements as they are not cleanable. With Ecoglass elements the permanent core will remain in the chamber. 1. Install new element by centering it on the element locator in the bottom of the chamber and pushing down into place. For Ecoglass elements slide all the way down onto the permanent core. 1. Inspect cover o-rings and replace if necessary. 1. Install cover onto the chamber by rotating clockwise) and tighting to 9-1 ft.-lbs. 1. Install and tighten drain plug (clockwise) to 6-7 ft.-lbs. 16. Open equalizing valve (counter-clockwise) to purge air from the new off-duty chamber. 17. When oil flows from the vent close the equalizing valve (clockwise). 18. Tighten new off-duty vent plug (clockwise) to 1- ft.-lbs. 119

44 MPD Series Specifi cations ANSI Dimensional Drawing 8. ±.1 (. ±.) places. ±. (11.6 ±.8) places ø.7 ±. ( ø 19.1 ±.8) Mounting Holes 6 places. ±.1 (8.6 ±.1) places 1.6 Nominal cover hex places FILTER CHANGE OVER PROCEDURE DIRECTIONA 1. OPEN EQUALIZING VALVE TO BALANCE PRESSURE.. SHIFT DIRECTIONAL LEVER ON RATCHET HANDLE.. PULL DETENT RING TO ALLOW HANDLE ROTATION.. ROTATE RATCHET HANDLE BACK & FORTH OVER INLET UNIT FULLY SHIFTED/DETENT ENGAGES. ON-DUTY ON-DUTY PULL TO ROTATE PULL TO ROTATE ø6. ±.6 ( ø 16.6 ± 1.) places. ±. (17. ±.8) places.6 ±. (6. ±.8) places.91 ±.1 (1.7 ±.). ±. (6. ±.8) places 8.6 ±. (76.9 ± 6.) (MPD-) Cover Torque 6-7 FT-LBS ( Nm) R7. ±. (R177.8 ± 6.). ±. (69. ± 1.7) Linear Measure: inch [millimeter] ¼ SAE- SAE O-Ring Boss Pressure Ports Per SAE J196/1 - PLS Plugged Torque 1-1 FT - LBS ( Nm) Equalizing Valve Ratchet Handle /16 SAE - O-Ring Boss Vent Plug, Port Per SAE J196/1 Torque 1- FT - LBS ( Nm) - Places Handle Detent.8 ±.6 (7.1 ± 1.) 7. ±. (177.8 ±.8) IN OUT CHANGEOVER INLET FOR HANDLE OVER AND ROTATE LIFT RING. ±. (11.6 ±.8) ±.18 (87. ±.6) (MPD-1) IN Optional Chamber Mounted Differential Pressure Indicator (Type M Indicator shown Torque - FT-LBS (.9-.7 NM) 1 SAE-16 Drain Port Places Plugged Torque 6-7 FT - LBS ( Nm) OUT.69 ±.9 (17. ±.) Foot Mounting Surface Raised Face LB. InLet/Outlet Flange Per ANSI B ±. (6. ±.8) Places Drawings are for reference only. Contact factory for current version. 1

45 MPD Series Specifi cations SAE Dimensional Drawing 8. ±.1 (. ±.) places. ±. (11.6 ±.8) places. ±.1 (8.6 ±.) places ø.7 ±. (ø19.1 ±.8) Mounting Holes 6 places.91 ±.1 ø6. ±.6 (1.7 ±.) (ø16.6 ± 1.) places. ±. (17. ±.8) places ON-DUTY PULL TO ROTATE 1.6 Nominal cover hex places FILTER CHANGE OVER PROCEDURE FILTER CHANGE OVER PROCEDURE 1. OPEN EQUALIZING VALVE TO BALANCE PRESSURE.. SHIFT DIRECTIONAL LEVER ON RATCHET HANDLE. PULL DETENT RING TO ALLOW HANDLE ROTATION.. ROTATE RATCHET HANDLE BACK & FORTH OVER INLET UNTIL FULLY SHIFTED/DETENTEN GAGES. DIRECTIONAL ON-DUTY PULL TO ROTATE. ±. (6. ±.8) places. ±. (.8 ±.8) places 8.6 ±. (76.9 ± 6.) (MPD-) Cover Torque 6-7 FT-LBS ( Nm) R7. ±. (R177.8 ± 6.). ±. (69. ± 1.7) Linear Measure: inch [millimeter] ¼ SAE - SAE O-Ring Boss Pressure Ports Per SAE J196/1 - PLS Plugged Torque 1-1 FT - LBS ( Nm) Equalizing Valve Ratchet Handle /16 SAE - O-Ring Boss Vent Plug, Port Per SAE J196/1 Torque 1- FT - LBS [ Nm] - Places Handle Detent.8 ±.6 [7.1 ± 1.] 7. ±. (177.8 ±.8) OUT IN CHANGEO VER INLET FOR HANDLE OVER AND ROTATE LIFT RING. ±. (11.6 ±.8) ±.18 [87. ±.6] (MPD-1) IN Optional Chamber Mounted Differential Pressure Indicator (Type M Indicator shown) Torque - FT-LBS [.9-.7 Nm] 1 SAE-16 Drain Port Places Plugged Torque 6-7 FT-LBs ( Nm) OUT.69 ±.9 [17. ±.] Foot Mounting Surface SAE Code 61 Inlet/Outlet Flange Per SAE J18 1. ±. [6. ±.8] Places Drawings are for reference only. Contact factory for current version. 11

46 MPD Series Parts List Element Type Index Description Ecoglass Microglass 1 Cover Assembly w/ psi bypass w/ psi bypass w/ no bypass Cover (O-ring & Dust Seal) V77 V77 Cover Backup Ring Indicator P option-indicator port plug M psi M psi E psi E psi E psi E psi H psi 9 9 H psi H1 psi 9 9 H1 psi Element (see chart on model code page) * Consult factory for MPDH components Element Type Index Description Ecoglass Microglass 6 Vent Plug ** Vent Plug O-ring V99 V99 8 Drain Plug w/ O-ring Pressure Tap Plug w/ O-ring ** Equalizing Valve Transfer Valve Assembly ANSI w/ indicator port SAE w/ indicator port Housing Assembly right side w/ indicator port right side w/o Indicator port left side w/ indicator port left side w/o Indicator port Housing Extension (MPD-) /8-11x1¾ HHCS ** Seal Kit-Transfer Valve Consult Factory 16** Seal Kit-Housing Assembly Consult Factory ** Not Shown