SOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.
|
|
- Lee Scott
- 5 years ago
- Views:
Transcription
1 With pleasure we introduce on the Italian market SYSTEM 8, produced NASS MAGNET of solenoid valve that thanks to their modularity give the possibility of a wide range of easy solutions. The solenoid valve can be from mm or mm (it depends on type of coil) and they are subdivided in four main modular members (to see following picture for the references): ) Armature Assembly ) Valve System ) Solenoid Coil ) Accessories With this modular system the range of applications it's possible to cover all kind of necessities: they can be used like valves / ( normally closed, but they are also realizable normally open, please contact our technical office for particular request) or / for compressed air or other inert gases; they can be used like pilots for solenoid valves with a nominal passage till /"to bars; SYSTEM 8 previews different levels of electrical absorption power for the various nominal diameters of passage of the solenoid valve on bases of the various working pressures; for greater values it is better to estimate with our technical office exact technical requirement demands in order to carry out the optimal choice. Different accessories are available for the combination of the valve with the requested coil. SYSTEM 8 is certify in compliance with the several international standards commonly request in the market. Please contact our technical office for particular requests. Internationals approvals CSA CDN (Canadian Standards Association) PTB D (Physikalisch Technische Bundesanstalt) UL FM USA (Underwriters Laboratories) USA Factory Mutual Research Corporation) NEPSI VRC (National Supervision and Inspection Center for explosion) Materials Plunger and core Armature tube Solenoid Coil Sealings Valve body Stainless steel (if required ) Thermoplastic / FKM (VITON) Polyamide or zinc diecasted. EXAMPLE Once that type of application has been settled down, find in the tables of the following pages the codes of the modular elements of system 8 on base of the orifice, of the pressure, and of the level of power and the type of tension. Made the choice, find the accessories and the coils for the completion of the solenoid valve. Technical features Body width Nominal orifice Working pressure Nominal flow mm / mm,,7 mm. bar Nl / min. D
2 ) Armature Assembly / and / way function normally closed (NC) standard materials Stainless steel M8x.7 M8x.7 M8x.7, 9, a) Armature Assembly / way (NC) Mx. Ø /UNA SUITABLE FOR WITH THREAD WITH FLANGE WITH THREAD Mx, (CON ORING) / UN A Pressure/orifice characteristics for / NC DC DC % % ondulazione residual ripple residua DC % ondulazione residual ripple residua AC Hz AC Hz LIVELLO POWER DI POTENZA LEVEL : LIVELLO POWER DI POTENZA LEVEL :,,,, orificio ORIFICE, ORIFICE orificio,,, LIVELLO POWER DI POTENZA LEVEL : LIVELLO POWER DI POTENZA LEVEL : a) Armature Assembly / way (NC), orificio, ORIFICE,,, ORIFICE orificio,,, ORiFICE SIZE PRESSURE WITH THREAD WITH FLANGE WITH THREAD SUITABLE FOR Mx, (CON ORING) / UN A, DC ,8 8 DC , , , ,, , knurled nut, Nm spring washer, Nm knurled nut. Nm. Nm fastening plate ORING,x, for version / UN A 7.8 NN 7... NN 9 D
3 ) / way function; solenoid valve; normally closed (NC) a) CNOMO Valve System height mm M8x valve body PA MANUAL bistabile WITH con MONOSTABLE attuatore MANUAL monostabile x Ø ORIFICE PRESSURE FLOW RATE WITHOUT MANUAL ( e ) SUITABLE FOR MANUAL, /,7 DC 9..,8 /, 8 DC 9. 9.,8 /, , /,.., /, 7.., /, 7.., /, ,7 /, *=qv nominal flow at a pressure of bar input (Δp = bar) and C MANUAL a) CNOMO Valve System height mm M8x valve body PA MANUAL bistabile WITH con MONOSTABLE attuatore MANUAL monostabile x Ø ORIFICE ( e ) PRESSURE FLOW RATE WITHOUT MANUAL SUITABLE FOR MANUAL MANUAL,8 /, 8 DC..., /, , /, , /, , /, *=qv nominal flow at a pressure of bar input (Δp = bar) and C knurled nut, Nm spring washer, Nm knurled nut. Nm. Nm screw Mx (included), Nm turn cap for bistable manual override push cap for monostable manual override COD 7.8 NN 7.. NN 7.. D
4 c)kr Valve System ( MM) Ø. M8x.7. valve body PA 7 MANUAL con attuatore bistabile MANUAL con attuatore monostabile x ORIFICE PRESSURE FLOW RATE WITHOUT MANUAL ( e ) SUITABLE FOR, /,8 DC.,8 /, 8 DC.,8 /, 8., /,., /, 7., /,7 8. *=qv nominal flow at a pressure of bar input (Δp = bar) and C MANUAL MANUAL d) FL Valve System ( MM) Ø 7 valve body PA senza WITHOUT MANUAL bistabile. 9 M8x.7 x ORIFICE ( e ) PRESSURE, /,, /,, /,7,7 /,7 FLOW RATE SUITABLE FOR WITHOUT MANUAL MANUAL.... *=qv nominal flow at a pressure of bar input (Δp = bar) and C screw Mx8 ORING,x, KNURLED NUT spring washer knurled nut for type KR for type KR COD. NN 7 COD. NN 9, Nm, Nm. Nm. Nm SCREW Mx for type FL ORING,x, for type FL ORING,x, for type KR COD 7.8 NN 7.. NN NN 9 NN 9 D
5 SOLENOID COILS technical features Technical features voltage tolerance relative duty cycle working temperature insulation class degree of protection moulding material ± % % ED if power and ambient temperature are respected + C F ( max C) IP with connector DIN or The rated power level and the final temperature are vaild for standard voltages V DC and V AC; the power consumption may be higher at different nominal voltages. Function is warranted at max. ambient temperature, max. voltage tolerance and operating temperature. The data of the final temperature is vaild for valve bodies and encapsulated coils. The temperature will be approximataly C higher if the bodies are manifolded. This will cause a reduction of the magnetic force. For additional information see Specification for Electronic Devices DIN VDE 8 OVER: you have to add this value to the working temperature in order to obtain the definitive temperature of ELECTRIC COILS mm Mx DC Hz Hz POWER LEVEL (watt),,,,8, ( C) 8 7 (VA),9, 8, 9, ( C) 8 88 (VA),,9,9 9, ( C)) M with LED led (ONLY DC) with FLYING LEADS DIN form B ISO 9 (DIN) industry form thermoplasti ELECTRIC COILS mm Mx DC Hz Hz POWER LEVEL M WITH LED (only DC) with FLYING LEADS (watt) ( C) (VA) ( C) (VA) ( C)) (STANDARD),7, 8,, 9, 8,9, 7,7,9,7, 8, 7,,8 7, 8 7,7 EN 78 A ISO Polymer thermoind. D
APPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
More informationSystem 13. ü ( System 13
System ü www.nassmagnet.com ( +9 676-0 System The name System stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all
More informationSystem 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
More informationSystem 6. ü ( System 6
System 6 ü www.nassmagnet.com ( +9 511 676-0 System 6 The name System 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationSystem 6. Solenoid Coils Armature Assemblies Valve Systems
Solenoid Coils Armature Assemblies Valve Systems a Kft. i r á g n u H t e n nass mag Precision Controls Kft. since 0 Nass Controls LP Nass Magnet GmbH Introduction.........................................
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationValve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
More informationSolenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More informationEVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationSolenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
More information2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 6124 can be combined with...
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More information2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More information2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 612 can be combined with... DN
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More informationCompact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
More informationDIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
More informationEx m Solenoid Operator Type 0519
nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for
More informationData sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
More informationDirect-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
More informationK Series 3 Way Direct Acting Balanced Poppet Solenoid Valve
Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More informationVALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
More informationMounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationSPOOL VALVE. solenoid air operated 3/2 G 1/4. SPECIFICATIONS : air or neutral gas, filtered, lubricated or not PORTS : G 1/4 CONSTRUCTION
Series SPOOL VALV solenoid air operated / G /4 SPCIFICATIONS FLUI : air or neutral gas, filtered, lubricated or not PORTS : G /4 PRSSUR : to 0 bar TMPRATUR : - C, + 60 C FLOW (Qv at 6 bar) : 860 I/min
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More information2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
More informationInformation 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22
TABLE OF CONTENTS Connectors Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22 Function Fittings Information 26 Flow Controls 27 Pilot Operated Check Valves 28 Pressure
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationVALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More informationViking Xtreme Valves. High reliability Few moving parts result in high reliability, rapid changeover and very long life.
Cable plugs and connectors are available in several variants. High electric protection class: IP65 or IP67. Smooth casing, suitable for food industry applications. High flow rate, long life. Terminal layout
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More informationMICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More information2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
More informationModular pneumatic valve island
Modular pneumatic valve island Compact design Modular configuration High flexibility Simple exchange of valves (with P shut off, also possible during operation an option) Type 8640 can be combined with
More informationSolenoid Operator 0513 / 1213
nass magnet GmbH Run Nr. 5 Eckenerstraße 4-6 24.10.2006 D-30179 Hannover Rev. 5 061024 Solenoid Operator 0513 / 1213 Operating Instructions NN 8220 112 and EC Declaration of Conformity Dear Customer! In
More information2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid. Low dead volume, low internal volume. High chemical resistance
2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid Low dead volume, low internal volume High chemical resistance Low power consumption Internal contours easily flushed Optional impulse
More informationValves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
More information3-Way Solenoid Valve - Direct Acting
3-Way Solenoid Valve - Direct Acting General application valves for dry or lubricated air, neutral gases and liquids Description: Applications: 3-Way Solenoid Valve - Direct Acting - Normally Closed. Coil
More informationMINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
More informationS40 Series. - 1/4" NPT - Stainless Steel Body - 2-Way Piloted Piston - Normally Open. Dimensions/Weight
S40 Series - " NT - Stainless Steel Body - 2-Way iloted iston - Materials Seals: Nitrile, Viton, Teflon, Ethylene ropylene Orifice: ilot Stainless Steel Main Stainless Steel Ø 3/8 Electrical Standard Housing:
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationHigh Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationElectrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationS21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
More informationFlow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
More informationSolenoid Operator 0516 / 1216
nass magnet GmbH Edition no. 2 Eckenerstraße 4-6 2007-01-10 D-30179 Hannover Rev.2 070110 Solenoid Operator 0516 / 1216 Operating Instructions NN 8220 126 and EC Declaration of Conformity Dear Customer!
More informationDirect mounting NAMUR solenoid valves for process valve actuators New Revolutionary Design- Worldwide Patents Pending
Direct mounting NAMUR solenoid valves for process valve actuators New Revolutionary Design- Worldwide Patents Pending The V-Solenoid II Standard Series ATEX EX Series Intrinsically Safe Series ExProof
More information2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design)
2/2-Way Pressure Relief Valve CX DBV (Right-Angle Design) CX DBV-E Model code (also example order) CX DBV 12 120 G1 F P 24V Type CX DBV = Pressure relief valve Nominal size 10 = DN 10 12 = 15 = 20 = CX
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationElectro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
More informationFor mounting on subbase or footprint in accordance with CNOMO recommendation E 06620N Part numbers (and voltages) Voltage max. power consumption U nom
Intrinsically Safe Miniature Solenoid Valves Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 5 For mounting on subbase or footprint in accordance with CNOMO recommendation
More informationIntrinsically Safe Miniature Solenoid Valves
Intrinsically Safe Miniature Solenoid Valves 5 Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 Intrinsically safe miniature solenoid valves EEx ia T6 approval no. 9
More informationS21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof
More information深圳市永旭伟业贸易有限公司 SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, 1/4.
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, / / Series FEATURES The monostable spool valves, series, have TÜV certifi ed IEC 60 Functional
More information02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationBM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationTechnical Principles of Valves
Technical Principles of Valves Symbols and Circuit Functions Symbol to DIN-ISO 1219 The circuit function illustrations are defined to the DIN-ISO 1219 Standard. These can be used to show other switching
More informationDirect-acting 2/2- or 3/2-way pivoted armature valve
0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationNugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More informationBM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationType Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits
2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting
More information97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationSolenoid valve VDHT standard BSP (British Standard Pipe)
Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More informationData Sheet. RS electro-pneumatic interface 3/2 and 4/2 manifold mounted solenoid valve
Data Pack G Issued March 1997 1502323412 Data Sheet RS electro-pneumatic interface 3/2 and 4/2 manifold mounted solenoid valve The RS electro-pneumatic interface is a modular solenoid valve, purpose made
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More informationDL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More informationNessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
More information