ZERO CROSS DETECTION OUTPUT AC CONTROL 3Q TRIAC & BACK TO BACK SCR
|
|
- Briana Phelps
- 5 years ago
- Views:
Transcription
1 I/P.LED EXAMPLES 45mm 27.9mm 25.4mm Z : Zero Cross Over ISO 91:215 & ISO 141:215 CETIFIED by InterConformity GmbH MODEL S ZEO COSS DETECTION OUTPUT AC CONTOL Q TIAC & ACK TO ACK SC Mounting Hole 47.5mm 61mm DC Input 22.5mm Slim 22.5mm with 5mm Aluminium Plate ODEING FOMAT AC Output 5mm AL PLATE Only Al plate take 14 Amp Load Current at 4 C. withstand 15 C. 5mm AL Plate Output oltage 2448 AC 246 AC 1mm Slim with C56 Inbuilt Heat Sink Output Current ating 16,25,4 5,,9,15,2 C56 HEAT SINK Only C56 Heat Sink take 2 Amp Load Current at 4 C. 19.5mm withstand 15 C. C56 HEAT SINK Slim 19.5mm with 2mm Copper plate Plate Control Input 42 DC with snubber Plate Specifications AL5: 5mm AL Plate CU2: 2mm Cu Plate C56: C56 Aluminium Heat Sink Product withstand 15 C & 22.5 MM SLIM Height Design. 1 MM Height Inbuilt C56 Heat sink Design. With easy open & lock IP 2 protection Flaps on I/P & O/P Terminals. 2mm Zero oltage TurnOn. CU PLATE ating from 16 Amp to 2 C 246 AC. Short Circuit Protected up to 115 Amp per phase current by help of suitable curve MC. No need to use semiconductor Fuse due to short circuit protected. withstand Fire etardant Plastic as per UL94 O GADE. 155 C. New improved SEMS Screw Washers input & Output terminals. Improved Direct onded Copper (DC) for higher Amp MODULEs. 2mm High resistance to aggressive chemicals CU Plate and dust due to special Potting. Logic compatibility, Fast switching, Low coupling capacitance. Inbuilt transient voltage suppressor.. mm copper.6 mm 96%. mm AL2O Ceramic copper İLTEC S DC MODULE O/P. COPPE TEMINAL STIP ONDING COPPE PLATE CHIP NOTE 1 : 48: 2448 AC available for 16Amp to 4Amp. 6: 246 AC available for 5Amp to 2Amp. ADANTAGES OF OE CONTACTO / MECHANICAL Zero voltage turnon High resistance to shock, vibration and abrasion High resistance to aggressive chemicals and dust No electromechanical or acoustical noise Logic compatibility Low coupling capacitance Long life cycle. Up to 1 11 cycles Increased system temperature accuracy Improved system reliability because s have no moving parts or contacts to degrade NOTE 2 : AL5 Plate available for 16Amp to 5Amp CU2 Plate available for Amp to 2Amp C56 Heat sink available for 16Amp to 5Amp No contact arcing, low electromagnetic interference, high surge capability Solid state MODULEs offer a very fast response time with absolutely NO contact bounce s are typically smaller than EMs, conserving valuable real estate in printedcircuit board applications s can be provided as surfacemount technology (SMT)parts, which means lower cost and easier SMT printedcircuit board manufacture Do not generate electrical noise Tel: , Fax: Direct Copper onded (DC) or Direct onded Copper (DC) improves the conduction of heat from semiconductor chip to external heat sink as well as reduces mechanical stress in connection to major load changes. Here two layers of. mm copper is bonded to ceramic at temperature above 12 C. Coefficient of thermal expansion of copper is higher than ceramic (96% AL2) so a joint layer is generated between them at high temperature which will not cause thermal stress or fatigue on power output semiconductors. PAGE 1 OF 6
2 Digital Oscilloscope General Specification Max arrier Layer (T ) max Ambient ange (T ) amb Storage ange (T ) st Input Terminal Screw Torque ange Output Terminal Screw Torque ange Power Factor Max. 48 AC Housing Material ase Plate Weight Control Input Electrical Wire Size ( Max. ) Power Output Electrical Wire Size ( Max. ) Test Standards: Pending Approvals: < 125 C 85 C 4 C to 8 C T = 1.6 N.m (Max.) T = 2.5 N.m (Max.) >.55 UL94 Grade 5mm Aluminium, 2mm Copper, C56 Heat Sink 12 grams Up to 2.1 sq mm(14 AWG) Up to.6 sq mm(2 AWG) OHS,IP2 UL 58,DE,TU,CSA 222 IEC 6941:216 IEC 6214:26 SC Parameter Tester TM Tester H.. Insulation reak Down Tester dv/dt Tester Tester Output Technical 25 C Unless Specified I/P CUENT (ma) Input Technical Specifications Parameters Unit S Type Selection Control oltage ange Input Frequency ange Hz 42 DC everse Polarity Protection Control Supply Current Consumption Input Impedance (Current egulator Circuit Impedance) Minimum Turn ON oltage Turn OFF oltage Control Input Status Indication Maximum Turn ON Time Maximum Turn OFF Time ma Ù DC DC ms ms ES 416 ma 1 kù 2 kù.5 DC <.25 DC GEEN LED Indication 1/2 Cycle (1 ms) 1/2 Cycle (1 ms) S TPE I/P OLTAGE (DC) Parameters Symbol Unit 16 Amp 25 Amp 4 Amp 5 Amp Amp 9 Amp 15 Amp 2 Amp Operating oltage ange AC MS 2448 AC Q TIAC 246 AC ACK TO ACK SC Operating Frequency ange f Hz 476 Hz Peak Inverse oltage PI PK Max. Surge oltage With Stand (<1 Second) surge MS 27 MS (8 PK ) ated Operational Current 2 C (esistive Load) I T Amp Maximum Load Short Circuit Protection 55 C I SC Amp "" Curve D.P. MC ating for Short Circuit Protection Amp I TSM NON epetitive Surge Peak ONState ated 5 Hz A P applied for 1/2 Cycle t=1 ms / t=8. ms (5 Hz/6 Hz) I 6 Hz A P Max. I²t for t=1 ms (5Hz) I²t A²s Max. I²t for t=8. ms (6Hz) I²t A²s Max. Peak ONstate voltage Drop at Full Control TM MS Minimum Isolation esistance between Input Terminals (+,4) to Output Terminals ( ~ 1, ~ 5 DC Ù GÙ Isolation oltage Input Terminals (+,4) to Output Terminals ( ~ 1, ~ 2) for 1 Minute (ZDA Type) ISO k Isolation oltage Input & Output Terminal (+,4, ~ 1, ~ 2) to ody Isolation for 1 Minute ISO k Max. ate of ise OFFState oltage d/dt /ìs Max. ate of ise OFFState Current di/dt A/ìS Max. Peak epetitive Forward OFFState oltage DM Max. Peak epetitive Forward OFFState current I DM ma Max. Peak repetitive reverse offstate oltage M Max. Peak repetitive reverse offstate current I M ma Max. DC Gate Trigger oltage GT Max. DC Gate Trigger Current I GT ma Turn OFF Time t q ìs Maximum Latching Current I L ma Maximum Holding Current I H ma è (Junction to case ) è (jc) C/W OFF State Leakage ated oltage & Frequency I (Snubber Leakage) leak ma For 2 AC < 1 ma For 2 AC < 1.5 ma For 44 AC < 2 ma For 44 AC < ma SCC Current ating (less than 1 µs) I SCC ka 1 ka 1 ka 1 ka 1 ka 1 ka Weight W gm Tel: , Fax: PAGE 2 OF 6
3 Zero Cross Switching (S ) ZEO COSSOE Waveform 2 THEMAL DEATING CUE WITH HEAT SINK 2 Line oltage (AC) Control Input (DC) Load oltage (AC) When control input is given to the, irrespective of line voltage condition, output will be ON after zero crossing of sine wave. Zero cross switching s are recommended when LOAD voltage gradually start to increase after zero crossing. It reduces chances of instant high voltage spike applied to the LOAD. Due to this characteristic, it reduces the surge current pass through LOAD during first conduction cycle. Load will be ON in less than 1mS duration for 5Hz line voltage & 8.mS duration for 6Hz line voltage. These MODULEs are most suitable for industrial applications of heater loads, inductive loads, capacitor bank switching etc. When control input is removed, output of the will be OFF after load current decreases to minimum holding current of the thyristor. This is due to the characteristic of thyristor. Above graph indicates functionality of zero switching. Tek 42DC Stop M Pos:.s CH1 1. CH2 1 M 5.ms CH <1Hz CUSO Type TIME Source CH 2?t 7.ms 1/?t Hz?. Cursor ms 16. Cursor 2 2.2ms 16. Amp ATING LOCK DIAGAM S ZEO COSS OE DC TO AC 25 PHASE + ~2 42 LED DC 4 CONNECTION DIAGAM S P N Double Pole MC Type 4 ~1 + ~2 ZEO COSS OE Load CUENT EGULATO ~ 1 LOAD NEUTAL 9 Amp Amp 5 Amp 4 Amp 25 Amp 16 Amp 15 Amp 2 Amp TEMPEATUE C I²t Amp =1 2 Amp =225 =11 1 =8 Amp =12 =26 Amp Amp= Amp Amp =42 4 Amp Amp ATING 25AMPMODEL Max. Time Duration can withstand(minutes) ON/OFF TPE Connection Diagram For OFF State Current > 4 ma For OFF State Current < 4 ma can withstand continuous Minute Duration OFF State Applied oltage (rms) 16/25/4 Amp (OFF State Current < 4 ma) 5 to 2 Amp (OFF State Current < 4 ma) 16 to 2 Amp ( OFF State Current > 4 ma) Star Connection without neutral pole MC 1 2 Iph Iph ph 1.5KW 1.5KW 1.5KW 1.5KW 1.5KW 1.5KW 9kW PHASE STA WITH OUT NEUTAL W= X L X Iph cosø 9W=1.7x44rms X Iph X.99 9 = 1.7X44X.99 = Iph = 9 1.7X44X X44X.99 = = Iph = 11.94Amp Star Connection with neutral N DP M.C.. DP M.C.. DP M.C.. Iph 1 2 Iph KW 1KW 1KW 1KW 1KW 1KW 6kW PHASE STA WITH NEUTAL L = 6kW Heater Load in three Phase with neutral so, 6 Watt = = 2W in each W = L X Iph cosø = 8.69Amp/ 2 = 2 X Iph x 1 Iph = 2 2 = 8.69Amp = 8.69Amp/ Iph = 8.69Amp/ Closed Delta Connection pole MC kW Phase Closed Delta W= X L X Iph cosø IL1 1 12W=1.7x44rms X Iph X = 1.7X44X = 1.7X44x Iph = 1.7X44X.99 IL2 2 Iph 5 4 IL 6 Iph IL = IL1 = IL2 = IL IL = IL = 9.2Amp Tel: , Fax: PAGE OF 6
4 Height 77mm(L) 68mm(L) 56mm(L) AIFLOW FO EFFICIENT HEAT TANSFE THEMAL CALCULATION Electrical Panel Air Out Heat Sink Fins should be in ertical Position So that Hot Air? T=Tj TA = P(èJC+èCS+èSA) Length flow from ottom to Top Self Cooling. Tj = Junction ( C) 125 C Our heat sinks are designed in such manner that horizontal TA = Ambient ( C) & vertical convection both occurs properly. = Power Dissipation (Watts) Keep 2mm Gap at Top and ottom of Heat Sink. Pd oltage Drop X Load Current MC Apply Heat Sink Compound between and Heat Sink. Air = Junction to The Screw should be tightened properly so that total Exposed èjc Heat Sink Aluminum is Sufficient to Dissipated One Watt of Heat Case C/W + Generated. = of Heat Sink ècs Advantages of using DC Technology : Compound (.2 C/W Type) PLC Copper has higher thermal conductivity So more = of External heat dissipation of junction to case & case to sink. èsa Heat Sink ( C/W) it depend upon Due to this thermal resistance èjc is very less. eduction in thermal resistance increases thermal Length, Width, Expose Aluminum efficiency of whole system. (.5 to 5) NOTE : If Current is high and it is mounted on lower capacity heat sink than maximum load current will also decrease as heat dissipation area decreases. Example: 1) 5Amp used for 26Amp Load Current than G68 Type of Heat Sink. 2) 5Amp used for 2Amp Load Current than 48 Type of Heat Sink. Air In Depth Air Out TPE OF HEATSINKS / CUENT ATING / èsa / SUFACE AEA / MECHANICAL DIMENSIONS / WEIGHT HEAT SINK TPE 56 + DIN AIL 5mm Plastic Din ail to TPE "C56" Model 1k Isolation 1F1 Nos. Current upto with C Din ail 42mm, Thermal esistance èsa = 5mm Plastic Din ail to 1k Isolation HEAT SINK TPE 68 + DIN AIL TPE "G68" 5mm Plastic Din ail to Model 1F1 Nos. 1k Isolation Model 1F1 Nos. M Screw C with Din ail 22.5mm, èsa = 2.5 C/W èsa = 2.65 K/W 491mm²X68mm =88 mm 44mm(W) X 68mm(L) X 2mm(H) + Weight 95gms 2mm(H) HEAT SINK TPE 72 + DIN AIL 72mm(W) HEAT SINK SELECTION GUIDEHEAT SINK SELECTION GUIDE ( esistive LOAD ) 1F MODEL / HEATSINK HEATSINK ATING 16 AMP 25 AMP 4 AMP 5 AMP AMP 9 AMP 15 AMP 2 AMP AL C G A A19 Upto 115 A for 1 115* 115* Upto 12 A for 6 A x = 18 A 4 A x = 12 A 44 A x = 12 A A19 WITH FAN Upto 115 A for 1 115* 115* Upto 156 A for 4 A x = 12 A 45 A x = 15 A 52 A x = 156 A A285 Upto 21 A for 65 A x = 195 A 7 A x = 21 A A285 WITH FAN Upto 24 A for A x = 225 A 8 A x = 24 A * As per UL 58 2 AWG (.6 Sq. mm) wire can draw 115 Amp at 4 C. 1.5mm(H) 4 C/W èsa = K/W ÄT= C 5mm²x56mm =19768mm 4mm(W)x 56mm(L) x 1.5mm(H) + Inbuilt Heat Sink IN 91 MODELWeight 57gms No Separate Heat Sink available mm(w) 4mm(W) TPE "72" Model 1FUpto Nos. Model 1F1 Nos. C èsa =.85 C/W èsa = 274 K/W 26mm²X72mm =1896 mm 72mm(W) X X + Weight 5gms 44mm(W) 5mm Plastic Din ail to 1k Isolation HEAT SINK TPE 48 + DIN AIL 48mm (W) HEAT SINK TPE 1 + DIN AIL 5mm Plastic Din ail to 1k Isolation Joint Plate 1mm(W) 1mm(W) TPE "48" Model 1FUpto 2 Nos. Model 1F1 Nos. C èsa = 1.17 C/W èsa = K/W 26mm²X48mm =12624 mm 48mm(W) X X + Weight 1gms TPE "A1" Model 1FUpto 2 Nos. Model 1FUpto 1 Nos. C èsa =.65 C/W èsa = 27.8 K/W 26mm²X1mm =26 mm 1mm(W) X X + Weight 69gms Tel: , Fax: PAGE 4 OF 6
5 TPE OF HEATSINKS / CUENT ATING / èsa / SUFACE AEA / MECHANICAL DIMENSIONS / WEIGHT HEAT SINK TPE 19 WITH OUT FAN TPE "A19" WITH OUT FAN Model 1FUpto 1 Nos. 19mm(W) Plastic ush for 1k Isolation Two Heat Sink Jointing Plate C èsa =. C/W èsa = K/W 26mm²X19mm =4997 mm 19mm(W) X X + Weight 1gms 2AC FAN HEAT SINK TPE 19 WITH 2AC FAN TPE "A19" WITH 2AC FAN Model 1FUpto 1 Nos. 19mm(W) Heat sink + 25mm Plastic ush for 1k Isolation AI C èsa =.22 C/W èsa = 27.7 K/W 26mm²X19mm =4997 mm 19mm(W) X X + Weight 15gms HEAT SINK TPE 285 WITH OUT FAN TPE "A285" WITH OUT FAN Model 1FUpto 6 Nos. Model 1F Upto 2 Nos. Model 1FUpto 11 Nos. 285mm(W) Plastic ush for 1k Isolation C èsa =.9 C/W èsa = K/W 26mm²X285mm =74955 mm 285mm(W) X X + Weight 195gms 2AC FAN HEAT SINK TPE 285 WITH 2AC FAN TPE "A285" WITH 2AC FAN Model 1FUpto 6 Nos. Model 1FUpto 2 Nos. Model 1FUpto 11 Nos. 285mm(W) Heat sink + 25mm Plastic ush for 1k Isolation AI C èsa =.4 C/W èsa = K/W 26mm²X285mm =74955 mm 285mm(W) X X + Weight 21gms Tel: , Fax: PAGE 5 OF 6
M4 Screw. Suitable up to 1.5 Sqmm. Plug in type terminal. wire for Input. Mounting Hole 92mm. 47.5mm
25sqmm Lugs M4 Screw SH1 Monofaze SS DC& Model Max. 25Sqmm Lugs I/P. 47.5mm Mounting Hole 92mm Plug in type terminal Suitable up to 1.5 Sqmm wire for Input 57.4mm Aluminum /copper Plate 86mm H.S Mounting
More informationGTZ 25 / 40 / 55. TECHNICAL DATA General features. Category of use: AC51, AC53a
GTZ 25 / 40 / 55 THEE-PHASE SOLID STATE ELAYS WITH LOGIC CONTOL Vdc / Vac Main applications Thermoforming Plastic extrusion lines Industrial ovens and furnaces Heat treatments Control applications with
More informationGTZ 25 / 40 / 55. THREE-PHASE SOLID STATE RELAYS WITH LOGIC CONTROL Vdc / Vac PROFILE. TECHNICAL DATA General features
GTZ 25 / 40 / 55 THEE-PHASE SOLID STATE ELAYS WITH LOGIC CONTOL Vdc / Vac Main applications Thermoforming Plastic extrusion lines Industrial ovens and furnaces Heat treatments Control applications with
More informationMAC12D, MAC12M, MAC12N. Triacs. Silicon Bidirectional Thyristors. TRIACS 12 AMPERES RMS 400 thru 800 VOLTS
MAC2D, MAC2M, MAC2N Triacs Silicon Bidirectional Thyristors Designed for high performance fullwave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking
More informationEUROTHERM ONTROLS. Two phase thyristor power switches. Product data
TC2000 TC2001 EUROTHERM ONTROLS Two phase thyristor power switches Product data TC2000 TC2001 Thyristor power switches Compact, two phase thyristor power switches for electrical heating applications from
More informationTemperature controller. Side. Vac 3. Typically. Temperature controller. Side. Vac Driving SSR. Temperature controller. Resistor. Vac.
Solid State Relays Vdc Input/ Output, Input/ Output High Reliability Shown smaller than actual size ac Controlled used with Controller with dc Voltage Driver Output L Typically ac Controlled used with
More informationThe Z Series. SCR Power controllers for resistance heating applications. Zero-Fired SCR Power Controllers AMPS VAC
The Z Series Zero-Fired SCR Power Controllers 60-1200 AMPS 120-600 VAC SCR Power controllers for resistance heating applications. ROBICON 1996 Rev. 7/96 Applications Robicon s Z series power controls are
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationSolid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More information1SVC F SVC F 0607 R100.20/30 R100.45
SIGMASWITCH Content Solid state relays Description, certificates, approvals... 163 Ordering details... 164 Technical data R111, R12x... 167 Technical data R100... 168 Technical data HDS R2... 169 Selection
More informationDPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
More informationAC4DLM. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 AMPERES RMS 600 VOLTS
Sensitive ate Triacs Silicon Bidirectional Thyristors Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control.
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationSolid State Relays contactor with Integrated Fuse Type RGC1F
Solid State Relays contactor with Integrated Fuse Type RGC1F Solid State Contactor with integrated fuse Zero Cross Switching Operational voltage: 230 VAC and 600 VAC 35mm width Control voltage: 4-32 VDC
More informationInsulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
More informationRelays. Industrial Automation Catalog Section - U906. Selection Guides. Solid State Relays RSS Series
Industrial Automation Catalog Section - U906 Relays Selection Guides Solid State Relays For up-to-date information, or to request a full copy of this catalog, contact us at www.idec.com or 800-262-IDC..
More informationDIN-A-MITE C. SCR Power Controller Delivers Up To 80 Amperes in a Compact Package. TOTAL CUSTOMER SATISFACTION 3 Year Warranty. Features and Benefits
DIN-A-MITE C TOTAL CUSTOMER SATISFACTION 3 Year Warranty SCR Power Controller Delivers Up To 80 Amperes in a Compact Package The DIN-A-MITE C silicon controlled rectifier (SCR) power controller provides
More informationRated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase)
SRPH1 Series Single Phase, Analog Input Type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
More informationSOLITRON MIDI - With Integrated Heatsink Types RJ1A, RJ1B
Solid State Relays SOLITRON MIDI - With Integrated Heatsink Types RJ1A, RJ1B AC semiconductor contactor Zero switching (RJ1A) or instant-on switching (RJ1B) Direct copper bonding (DCB) technology LED-indication
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationGeneral Description and Quick Selection Guide...E2. Series SAS Panel Mount Hockey Puck Relays...E4. Series SAR DIN-Rail Mount Relays...
General Description and Quick Selection Guide...2 Series SAS Panel Mount Hockey Puck...4 Series SAR DIN-Rail Mount...6 Accessories...10 Application Notes...12 Technical Information... Wiring Diagrams...22
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationSolid State Relays, 3-phase
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relays, 3-phase Zero-Point switching, heatsink integrated Main Characteristics: Three-phase controlled Zero switching LED display Various connection
More informationFAMILY. 1-Phase 1 Up to 25A Up to 40A Up to 80A Up to 600VAC 3-Phase, 2 leg 1 No Up to 33A Up to 80A Gang 2 units
THE DIN-A-MITE FAMILY 1 Refer to curves on reverse side for specific ratings. ➁ angle fire is not CE approved for conducted or radiated emissions. ➂ Will fit within the width dimension of most comparable
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More informationRSS Series Panel Mount Solid State Relays. 4,000 RMS (minute)
RSS Series Panel Mount Solid State Relays Key features of the RSS series include: Photo isolation 1,200 volt blocking voltage 4,000 volt optical isolation Zero voltage turn-on 100% tested at rated current
More informationRE-PR3-E-86&105 3-Phase Panel Mount 86 and 105kW
Page 1 of 6 3-Phase Panel Mount 86 and 105kW Features: Benefits: 0-10Vdc, 0-5Vdc, 4-20mA or manual via potentiometer control input Over temperature protection with auto reset Enclosed panel mounting Efficient
More informationDH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More informationRE-PR1-F 1-Phase Din-Rail Mount 1.5, 3 & 6kW
Page 1 of 5 RE-PR1-F 1-Phase Din-Rail Mount 1.5, 3 & Features: Benefits: 0-10Vdc or 0-5Vdc control input Over temperature protection with auto reset Din-rail mounting Efficient electronic switching No
More informationMiniature Circuit Breaker
Introduction - Miniature Circuit Breaker (MCB) SALIENT FEATURES SALIENT FEATURES Standards MCBs conform to the latest standard IS 8828: 1996/IEC: 898 1995 Mid-Trip Position The Mid trip position of the
More informationPresentation Soft starters 0 Altistart 48 soft start - soft stop units
Presentation Soft starters 5 6 7 65_Ver.-EN.fm/ Presentation (continued) Soft starters Applications The Altistart 8 soft start - soft stop unit is a controller with 6 thyristors which is used for the torque-controlled
More informationSixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationDEVICES FOR BIPOLAR APPLICATIONS. For Bidirectional use C or CA suffix for types P4KE6.8 thru P4KE440
GPP TRANSIENT VOLTAGE SUPPRESSOR 4 WATT PEAK POWER 1. WATT STEADY STATE TVS P4KE SERIES FEATURES * Plastic package has underwriters laboratory * Glass passivated chip construction * 4 watt surage capability
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationPower Electronics. POWERSWITCH Semiconductor Relay / - Contactor With Load Circuit Monitoring PH 9270
Power Electronics POWERSWITCH Semiconductor Relay / - Contactor With Load Circuit Monitoring PH 9270 0255163 Semiconductor relay PH 9270.91 Semiconductor contactor PH 9270.91/000/02 AC semiconductor relay
More informationGTS 15/25/40/50/60/75/90/120A
GTS 15/25/40/50/60/75/90/120A POWER SOLID STATE RELAYS WITH LOGIC CONTROL Vdc / Vac Main applications Plastic extrusion lines and injection presses Packing and packaging machines Polymerization and production
More informationDIN EN UL 508 / CSA 3RF A A 0 2
PMA Prozeß- und Maschinen-Automation GmbH Solid State Relays Zero-Point Switching, heatsink integrated Main Characteristics: Zero switching LED display Various connection technologies Plug-in control terminal
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationDX 3 MCBs. Choice of DX 3 MCBs for capacitor banks. Technical data
Specifications IS/IEC 60898-1 2002 Number of poles SP, SPN, DP, TP, TPN, FP Characteristics C & D Curve Breaking capacity 10 ka 0.5 A to 63 A as per IS/IEC 60898-1 2002 16 ka for 0.5 A to 25 A as per IEC
More information2.1 Warnings & Agency Approvals Electrical Connections - Specifications Standard Wiring Configurations...2 4
CHAPTER ELECTRICAL 2 INSTALLATION Contents of this Chapter... 2.1 Warnings & Agency Approvals..................2 2 2.1.1 Isolation..............................................2 2 2.1.2 Electrical Power
More informationGTS-L 5 / 10 / 15 POWER SOLID STATE RELAYS WITH LOGIC CONTROL TECHNICAL DATA
GTS-L / 0 / POWER SOLID STATE RELAYS WITH LOGIC CONTROL Main applications Extrusion lines and injection presses for plastics Hot channels Thermoforming machines Packing and packaging machines Temperature
More informationThe High Power Stack Horizon
Voltage Supply 480-600-690V Current Rating from 150 to 2100A Designed to drive 1-2-3 Phase Loads Internal Fuse with Micro for Fuse Failure Stall Fan Protection for 1100 to 2100A Control Board with Plug
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More informationThyristor Power Controllers for Resistive and Inductive loads (Product Code 21.3)
Thyristor Power Controllers for Resistive and Inductive loads (Product Code 21.3) 1 Model Wise Descriptions: Sr. No Model Product Description 21.3.1 POW-1 Single Phase SCR Power Controller for single phase
More informationModel Number Structure
Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationSolid State Relays Datasheet WG 480 D...Z
Datasheet WG 4 D...Z Features Switching Zero cross Output Input Back to back SCR with internal snubber DC with constant current control Applications Resistive and inductive loads with cos > 0.85 Technical
More informationDX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
More informationAPPLICATIONS: AVAILABLE OPTIONS
PRODUCT OVERVIEW The HB series offers up to 350 watts of output power in standard Half-Brick package. This series features high efficiency up to 92%, high power density and 1500 Volts of DC isolation.
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationSolid State Relays Datasheet WG 480 D...Z
Datasheet WG 4 D...Z Features Switching Zero cross Output Input Back to back SCR with internal snubber DC with constant current control Applications Resistive and inductive loads with cos > 0.85 Technical
More informationJ TS 7090 Thyristor power switch
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationPower Switching Principles
Power Switching Principles What Is An SCR Power Controller? An SCR, or thyristor, is a semiconductor device which switches AC power ON and OFF. It is used to control the electrical power delivered to heating
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationSolid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More informationZero Cross Over Turn On Thyristor Switch Card for Capacitor Bank
Zero Cross Over Turn On Thyristor Switch Card for Capacitor Bank TSC-306-S/TSC-303-S TSC-306-D/TSC-303-D Description: Libratherm offers Thyristor Switch Card model TSC-306 which is specially designed for
More informationModel Number Structure
Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible
More information韩国 Autonics 进口固态继电器型号模拟固态继电器 SRPH1 SRPH1 Series SSR 比例控制继电器选型说明书 pdf Single phase, Analog input type SSR Features Power control/ Cycle control/phase c
Series Single phase, Analog input type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
More informationSolid-State Relays. Solid-State Relays. Features. Description. Overview
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationSCR Power Controllers
SCR Power Controllers Instruction Manual SCR POWER CONTROLLERS TABLE OF CONTENTS General Description and Specifications...1 Firing Modes....2 Installation and Wiring...4 Operation...9 Troubleshooting...15
More informationRVS-AX Instruction Manual
RVS-AX Analog Soft Starter 8-170A, 220-600V Instruction Manual Ver. 10/11/2009 2 Table of Content RVS-AX Instruction Manual 1. TABLE OF CONTENT 1. Table of Content...2 2. Safety & Warnings...3 2.1 Safety...3
More informationCI-TI Contactors and motor starters Types CI 61 - CI 98
Data sheet CI-TI Contactors and motor starters s CI 6 - CI 98 Contactors CI 6, CI 7, CI 86 and CI 98 switch powers of up to 0 kw, 7 kw, 45 kw and 55 kw respectively under 80 V - loads. Accessories include
More informationPDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
More informationvaristor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
More informationEuroload Changeover Switch
Euroload Features: Quick make & quick break mechanism. High electrical & mechanical endurance. Advance neutral. Enclosed housing to avoid dust ingress. Staggered terminals upto 800A. Load and Line reversibility.
More informationIHM B modules with IGBT 4. (1200V and 1700V)
IHM B modules with IGBT 4 (1200V and 1700V) Table of content Key applications Technology Characteristics and features Usage and handling Product type range Quality and reliability Advantages versus competitor;
More information3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)
FEATURES Output Current of 3A Fast Transient Response 0.04% Line Regulation 0.2% Load Regulation Internal Thermal and Current Limiting Adjustable or Fixed Output oltage(1.5, 1.8, 2.5, 3.3, 5.0) Surface
More informationABB Softstarter Benefits Charnchanok Thongprad
ABB Softstarter Benefits Charnchanok Thongprad tomation Technology Products AB Control - 1 - - Why Softstarters? Benefits for the Electrical network Reduces voltage drops on networks Minimizes starting
More informationLecture 2. Power semiconductor devices (Power switches)
Lecture 2. Power semiconductor devices (Power switches) Power semiconductor switches are the work-horses of power electronics (PE). There are several power semiconductors devices currently involved in
More informationGQ 15 / 25 / 50 / 90 A SINGLE PHASE SOLID STATE RELAYS
GQ 15 / 25 / 50 / 90 A SINGLE PHASE SOLID STATE RELAYS Main features Main applications Packaging Machinery Thermoforming Plastic extrusion lines Industrial ovens and furnaces Control application with high
More information20 amps 220 amps, 60 Hz VDC VAC G3PA-420B-VD-2 DC amps 440 amps, 60 Hz G3PA-450B-VD-2 DC12-24
Solid State Relays (SSRs) G3PA/G3PB Long Service Life for Circuits that Cycle Frequently D D D D D Built-in heat sink increases life and reliability Voltage turn-on at zero crossing reduces initial inrush
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationS24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
More informationMotor Controllers Soft Starting/Soft Stopping Types RSC 4.../RSO 12.., RSC 60.../RSO 16..
otor Controllers Soft Starting/Soft Stopping Types RSC 4..../RSO 12.., RSC 60.../RSO 16.. Control and output modules for soft starting/stopping of 3-phase induction motors Rated operational current: 3
More informationLS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
More informationOutput Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
More informationGTS-L4 5 / 10 / 15 TECHNICAL DATA
GTS-L4 5 / 0 / 5 POWER SOLID STATE RELAYS WITH FOUR INDEPENDENT SOLID STATE RELAYS Main applications Extrusion lines and injection presses for plastics Hot channels Thermoforming machines Packing and packaging
More informationMINIATURE CIRCUIT BREAKER
Technical Article MINIATURE CIRCUIT BREAKER T 146 PURCHASE he Spaceage MCB protects wires and cables automatically against overload and short-circuits in domestic, commercial and industrial installations.
More informationEfficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
More informationThyristor power controller TE10A. Burst-firing Single-cycle Advanced Single-cycle
Thyristor power controller TE10A Burst-firing Single-cycle Advanced Single-cycle Control of short-wave infrared elements and loads of constant resistance up to 20kW User Manual Copyright Eurotherm Automation
More informationPower Switching Devices
Watlow has manufactured solid state power controllers for over forty years. Watlow s is a microprocessor-based product that features application flexibility unmatched by any other silicon controlled rectifier
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More information