MINIATURE CIRCUIT BREAKER

Size: px

Start display at page:

Download "MINIATURE CIRCUIT BREAKER"

Elijah Hines
5 years ago
Views:

Technical Article MINIATURE CIRCUIT BREAKER T 146 PURCHASE he Spaceage MCB protects wires and cables automatically against overload and short-circuits in domestic, commercial and industrial

In systems where proper earthing is provided the MCB provides additional protection by instantaneous interruption of the fault current, in case of faults, thereby eliminating the possibility of

1 Technical Article MINIATURE CIRCUIT BREAKER T 146 PURCHASE he Spaceage MCB protects wires and cables automatically against overload and short-circuits in domestic, commercial and industrial installations. In systems where proper earthing is provided the MCB provides additional protection by instantaneous interruption of the fault current, in case of faults, thereby eliminating the possibility of excessive touch voltages. Range: The Spaceage 6KA MCB is available in a comprehensive range from 0.5 to 100A in 1, 2, 3 & 4 pole versions. Standards: This range of MCB's conforms to the latest National and International standards - IEC Modular Design: The MCBs are most compact with mounting depths up to 55mm and widths in multiples of 17.5mm and are part of the modular N system. Spaceage MCBs have contact tips made of special silver alloys ensuring higher life and

Causes of Short circuit and overloads maximum safely against contact welding.

Short Circuit Breaking Capacity: 6 ka & 10 ka Type Classification: B & C Rated Voltage: 240 / 415 V: 50 HZ Ref.

We have maintained standard thickness of 17.5mm, similar to lower rating of MCB (0.5 A to 63 A) to facilitate easy mounting in any Distribution Box.

Tested as per IEC Pub 60898 (1995) & IEC60898-1, 2002 protection against electric shock.

2 Causes of Short circuit and overloads maximum safely against contact welding. These contacts have low contact resistance resulting in reduced voltage drop and a very low watt loss leading to energy savings. Short Circuit Breaking Capacity: 6 ka & 10 ka Type Classification: B & C Rated Voltage: 240 / 415 V: 50 HZ Ref. Ambient Temperature: 50ºC 100 AMP MCB & 125 AMP ISOLATOR 100 Amp MCB & 125 Amp ISOLATOR has been designed keeping in mind the customer needs. The features are as under Conforms to IEC We have maintained standard thickness of 17.5mm, similar to lower rating of MCB (0.5 A to 63 A) to facilitate easy mounting in any Distribution Box. can be mounted on standard 35mm DIN Rail by snap action. No time wastage in installing and replacing the MCB. SHOCK PROOF: Finger and hand touch safe. Tested as per IEC Pub (1995) & IEC , 2002 protection against electric shock. HOUSING: The housing of SPACEAGE MCB is injection moulded from special grade PBT as per international specifications. The housing and other moulded components are fire retardant, anti-tracking and non hygroscopic. The housing can with stand high temperature and is impact resistant. CONTACTS: Contacts are made of special silver inlaid into copper strip, ensuring higher life and maximum safety against contact welding and erosion. These contacts have low contact resistance resulting in reduced watt loss. The contacts are designed to have zero Bounce during closing operation. CURRENT LIMITING ACTION: The high speed current limiting action ensures that the MCB operate before the full prospective fault current is allowed to develop. Under fault conditions, damage can be sustained to the installation and associated equipment due to Box type terminal has been designed for easy termination of cable up to 50 mm2. Heavy duty screws have been provided for better tightening of contacts. Heavy duty ETP copper terminals and extra thick silver inlaid contacts ensure low temperature rise and low watt loss. SALIENT FEATURES CONFORMS TO LATEST STANDARD SPACEAGE MCB conform to the latest standard IEC Pub (1995) in selected ratings. CE MARKING fulfills the requirement of global standards. ENERGY SAVING: The low power loss as stipulated in the IEC 60898/95 has been taken care of in designing the SPACEAGE MCB. Low power loss figures of SPACEAGE MCB contributes significantly to the energy saving. DIN RAIL MOUNTING: SPACEAGE MCB's the amount of energy that passes before the current is completely interrupted. The total PURCHASE 147

energy Let through depends on the value of current and the time for which it flows, and is denoted by the symbol I2t.

This reduced LET THROUGH ENERGY (Class 3 as per BS EN 60898) assists greatly with both back-up and discrimination considerations.

In the even t of an over current or short circuit the MCB automatically interrupts all poles even if the MCB toggle is held in ON position, the handle always indicates the correct contact position.

The Bimetal Relay moves against the trip bar releasing the trip mechanism.

3 energy Let through depends on the value of current and the time for which it flows, and is denoted by the symbol I2t. The high speed current limiting action of SPACEAGE MCB ensures that the energy let through and any subsequent damage is minimized. This reduced LET THROUGH ENERGY (Class 3 as per BS EN 60898) assists greatly with both back-up and discrimination considerations. OPERATING MECHANISM: SPACEAGE MCB have a quick make & break Trip Free Mechanism. In the even t of an over current or short circuit the MCB automatically interrupts all poles even if the MCB toggle is held in ON position, the handle always indicates the correct contact position. MODERATE OVERLOAD CONDITION: Detection of moderate over load conditions is achieved by the use of a Bimetal Overload Relay, which deflects in response to the current passing through it. The Bimetal Relay moves against the trip bar releasing the trip mechanism. SHORT CIRCUIT CONDITIONS: When the current flowing through the MCB reaches a predetermined level, the solenoid in Magnetic Coil directly pulls in the plunger, which releases the trip mechanism. PERFECT CONNECTIONS: The design of terminals makes the wiring easier. Combination box type terminals with combination head screws on both sides with deep serrations ensure sparkless and firm connections. The bi-connection facility simplifies connection in various application areas. LOW WATT LOSS: SPACEAGE MCBs have been designed to minimize energy loss through unique contact configuration & reduction of hot spots. Watt loss per pole in SPACEAGE MCB is far lower than that 148 PURCHASE specified in, IEC: POTENTIAL FREE DIN CLIP: The all insulated DIN clip ensures electrical safety and high mechanical strength. WORKING PRINCIPLE: SPACEAGE MCB is a high fault capacity, thermal-magnetic type of breaker. It protects against overload and short circuit. Over load protection is achieved with a thermal bi-metal strip which gets heated in case of overload and in turn pushes the trip latch which releases the contacts and the operating knob is switched to Mid Trip Position clearly indicating the fault. In case of short circuit the high fault current energizes the magnetic coil resulting in plunger striking the trip lever which ensures immediate release of tripping mechanism and the operating knob is switched to Mid Trip Position. TRIPPING CHARACTERISTICS: RECOMMENDED APPLICATIONS: B TYPE: for protection of Resistive load such as bulb, heater etc. C TYPE: for protection of Inductive load such as motor, air conditioner etc. MCB - TPN 100 AMP AUXILIARY SWITCH SPACEAGE MCB with Auxiliary Switch Auxiliary switch can be supplied factory

WIRING DIAGRAM fitted with any MCB (SP, SPN, DP, TP, TPN, and FP) to give indication of 'ON' or 'OFF' position of MCB FUNCTION: The auxiliary switch is used for remote indication of the

The auxiliary switch is connected to the tripping mechanism of MCB and operates along with MCB. That it is switched ON and OFF together with the MCB through the connector.

ISOLATOR Mounting Position: Any position Mounting: Quick snap to mounting rails, 35 mm Connecting Terminals: Combination box terminals on incoming and outgoing sides.

30,000 make/break operations Ambient Temperature: T max. : +55º C, T min.

AC23A Rated Voltage: 240 / 415 V AC Rated Currents: 16 to 125 Amps.

4 WIRING DIAGRAM fitted with any MCB (SP, SPN, DP, TP, TPN, and FP) to give indication of 'ON' or 'OFF' position of MCB FUNCTION: The auxiliary switch is used for remote indication of the circuit condition (ON/OFF) of the MCB. All the connecting terminals are easily accessible from the top position. The auxiliary switch is connected to the tripping mechanism of MCB and operates along with MCB. That it is switched ON and OFF together with the MCB through the connector. It is available in factory fitted module. This can be used in following outgoing combination modes depending upon user requirement. ISOLATOR Mounting Position: Any position Mounting: Quick snap to mounting rails, 35 mm Connecting Terminals: Combination box terminals on incoming and outgoing sides. Suitable for single-core, stranded and flexible conductors up to 25 sq mm, Combination crosshead screw, max. Tightening torque 2 Nm Electrical Service Life: Min. 30,000 make/break operations Ambient Temperature: T max. : +55º C, T min.: -25º C Impact Resistance: 3g, At least 2 impacts duration 13 ms TRIPPING CHARACTERISTICS CURVES Specifications: IEC , 1999 Number of Poles: SP, DP, TP & FP Utilization Category: AC23A Rated Voltage: 240 / 415 V AC Rated Currents: 16 to 125 Amps. TECHNICAL DATA Specifications: IEC Pub Number of Poles: 1, 1+N, 2, 3, 3+N & 4 Tripping Characteristic & Rated: B characteristics- 0.5A to 100 A Currents (In): C characteristics - 0.5A to 100A Rated breaking capacity (Icn): 10,000 A Energy Limiting Class: Class 3 as per BS EN Rated Voltages (Ue) Single Pole: 240 / 415 VAC Multi Pole: 415 VAC Insulation Voltage (Ui): 500V Rated Frequencies: 50/60 Hz Impulse withstands voltage (Uimp): 4 KV (1.2 μ) Impulse power frequency voltage: 2 KV (50 Hz) Housing material: Polybutylene Terephthalate in Grey colour Degree of Protection: IP 20 as per IEC PURCHASE 149

5 From: - Suresh Duggal (General Manager) SPACEAGE SWITCHGEARS LTD 68, IDC, Mehrauli Road Gurgaon PURCHASE

Miniature Circuit Breaker

Introduction - Miniature Circuit Breaker (MCB) SALIENT FEATURES SALIENT FEATURES Standards MCBs conform to the latest standard IS 8828: 1996/IEC: 898 1995 Mid-Trip Position The Mid trip position of the