Section 3A Lighting. Bulbs... 5, 12. Fender Lights Head Lights Indicator Lamps License Plate Frames

Transcription

1 Section 3A Lighting Bulbs... 5, 12 Fender Lights Head Lights Indicator Lamps... 7 License Plate Frames Marker Lights... 25, 26 Seal Beams... 5, 10 Spotlamps Tail Lights Turn Signals Visor For a More Complete Selection of Lighting See EVO/TC Catalogue Section 3. PRESTON CYCLE PRODUCTS INC. 3A-1

2 Headlights A B FLH Aluminum Head Lamp Housing & Parts Replaces left and right, on all FL s (A) Chrome housing set ( T) (A) Polished housing set (B) Light unit w/halogen beam ( A) (B) Light unit w/seal beam (60/55W) Complete FLH Head Lamp Cowl Assembly Item includes chrome or polished cowl set, top handlebar clamp cover, complete headlamp assembly with chrome rim and spot lamp, and signal lamp set. Includes installation hardware Chrome kit Polished kit FLH Head Lamp Cowl Kit Kit available in polished or chrome finish complete with rim and matching top handlebar clamp. As shown Chrome kit with bulb Polished kit with bulb Black kit with H-4 bulb 7 Headlight Replacement Parts Fits FL with aluminum housing. # 1 N/A Screw, headlight mount (2662W) (10 pk) Rear bucket fits between housing and outer bulb retainer bucket ( ) Chrome rim ( A) Gasket ( A) (each) Lense body (with halogen bulb) ( A) prong socket only for h/lights ( ) Retaining ring for seal beam ( ) Seal beam rear bucket ( ) Adjuster screw ( ) (pair) Top spring FL, FLT ( ) (3 pk) Side springs, lamp door ( ) (5 pc kit) Bottom spring ( ) (10 pk) Chrome adapter ring, adjustable fork ( ) As above, polished Handlebar Clamp Cover Replaces original type on FLH wide glide forks. Chrome Polished Black Year Type Smooth Damper hole Smooth ( ) #3806 Uses #40701 damper kit 3A-2 PRESTON CYCLE PRODUCTS INC. Chrome 7 Headlight Cowl Kit Kit includes chrome ABS headlight housing, 7 H-4 lamp assembly with rim, upper fork covers and chrome fork air baffle. Fork covers can be installed without disassembly of forks. Fits FLT and FLHT

3 Headlights Headlight for Early Springer Models A replica of the OEM headlamp used on most models from Just like the original. Available in all black painted finish with chrome bezel, or chrome plated. Restoration use or custom but will not fit Springer Softail models from late 1988-on. 832 Chrome 12-volt assembly ( C) 3558 Black 12-volt assembly ( B) Replacement Parts 3552 Headlight lens door (trim ring) with screw ( , ) Glass lense ( ) volt replacement bulb volt replacement bulb 7 Headlight Assemblies Beautifully chrome-plated and fitted with either a bright 12-volt quartz halogen sealed beam, or standard 12-volt sealed beam lamp. The higher output and low voltage drain of the quartz lamp guarantees better visibility. Chrome mounting bracket included with light With 6V standard sealed beam ( ) With 6V, FLH replica (stamped shell) 6149 With 12V standard sealed beam As above, black with chrome rim ( ) V w/std beam and beam indicator 7 Headlight Components BT Chrome 7 headlight shell ( ) Halogen seal beam (12V 65/35w) ( ) Std. seal beam (6V 50/40w) ( B) Std. seal beam (12V 60/50w) ( ) headlight inner ring ( ) headlight outer ring ( ) Lamp wiring connector, cloth ( ) Lamp wiring connector ( ) Headlight bracket ( ) 6 Volt Chrome 7 Headlamp Lamp unit features oil and generator lamps, sockets, light rim and beam. Fits K and XL models Replaces FL Head Light Bracket Mounting Kit Complete kit includes mounting hardware, as required to mount head light bracket on PRESTON CYCLE PRODUCTS INC. 3A-3

4 Headlights FX-XL 5-3/4 Stock Black Headlight Headlight includes 12V sealed beam. Early style has 2 connections on back of shell. Late type replaces and has a rectangular hole in shell for wiring XL & FX /4 Billet Lowered Spring Fork Headlight 12 Volt lamp is primarily for FXSTS models but can be used wherever 5-3/4 yoke mount lamps are used. Mounts 2-1/2 lower than typical bottom mount lamps XL 5 3/4 Chrome Headlight Assembly Replaces the black housing on stock XL models. Includes centre stud, rubber grommet, chrome rim and a 60/55 watt H-4 unit. PCP Application XL Chrome Stock FX-XL Head Lamp Shells Late type shell has square hole in back of shell for wiring. Early type has wire connections on back side of shell Early Shell models. ( ) 1338 Late Shell models ( ) Wagner 12 volt 30/30w 5-3/4 Sealed Beam included Early, complete ( ) As above, black 6676 Late, complete ( ) As above, black Chrome outer/inner door rim ( ) (pair) 5442 Rubber ring ( ) A-4 PRESTON CYCLE PRODUCTS INC.

5 Sealed Beams Halogen Sealbeams Designed to outperform the standard, OEM quartz lamp used since 1982, this quartz-halogen sealed beam fits all 12-volt Harley models using 5-3/4 headlamps from 1965-on. Manufactured to provide OEM specifications for brightness and vibration resistance /4 50/35 Watt ( A) /35Watt ( ) Candlepower Halogen Headlights to Fit Harley These headlight units are special heavy duty units made for motorcycle use and made with (1) tab to fit the Harley with no problem. These are not standard automotive type units. Both units feature a 12-Volt 60/55 Watt replacement Bulb /4 Halogen unit /4 Halogen unit (heavy duty) Halogen unit Halogen unit (heavy duty) Cycle Ray Head Lamp Lens Replacement lens for 6.5 BT Springer headlight (#832) Lens only ( ) Tri-Bar Halogen Unit Features early styling with a replaceable H-4 bulb, designed to fit into any existing 7 or 5-3/4 light assembly /4 beam with 60/55 bulb Bulb only for above 60/55 watt /2 spot lamp beam Bulb only for 7 beam 60/55 watt XENON Boosted H-4 Bulb H-4 bulbs offer superior night visibilty. Xenon gas cools the filament and allows the halogen process to produce a higher light output. Special blue coating increases the whiteness of the light with only a trace of blue /55W /55W Caution: Do not touch any halogen bulb with bare hands during installation or replacement. The manufacturer advises that the light unit not be washed with a water hose as it is not a sealed beam unit. Round Seal Beams Use on stock Sportster headlights, FX models, our custom K.D. highlights and others using 7 seal beams. Sold each /4 6 V (30/30w) ( ) /4 12V (30/30w) ( ) V (50/40w) ( ) V (60/50w) ( ) PRESTON CYCLE PRODUCTS INC. 3A-5

6 Headlight Brackets Chrome FXWG Headlight Bracket Mounts bottom mount head lights on fork, also covers rough casting on lower tree. PCP Years 1357 Top 1980-E85 FXWG 4-Speeds ( ) Chrome Headlight Brackets PCP C/C Fitment /2 3/ FL /4 3/16 FX and XL extended front ends, lowers headlight for easier adjustment /4 3/16 Adapts to bottom clamp pinch bolts of most front ends /2 Stock FL and for converting to late model wide glide look Bracket to mount headlights #6148 or #6149 to late model FXWG Chrome Side Mount Headlight Bracket Fits on 35mm fork tubes (not FL Glide tubes). 826 Set Chrome Headlight and Taillight Rims /4 Custom head lights /2 Spot lamp ( ) Light rim XL , FX inner 71-on ( )(pr) 5442* Rubber ring (for rims above) ( ) Headlight ring all FL s ( ) H/light ring & spring all FL s 1960-on ( A) Headlight rim FLT ( ) Inner headlight ring FL ( ) Inner headlight ring FL ( ) Taillight rim ( ) Tombstone taillight ( ) *NOTE: Fits between two halves of # Spring Fork Headlamp and Horn Mount Bracket Black bracket for use with shock absorber and horn. Fits EL, WL, G, UL and FL. Replaces Spring Fork Headlamp Mount Bracket Parkerized. Fits G, WL; 1936 VL; EL; UL and FL. Replaces A-6 PRESTON CYCLE PRODUCTS INC.

7 Visor and Mounting Brackets Chrome Headlight Visor Covers Fits XL models 1960-on, FX and FXR models 1971-on with diecast headlight visors. Available with or without cutaway for indicator lights. With Cutaway 899 Plain ( T) 4635 Louvered ( T) Without Cutaway 900 Plain for models with indicator lights in speedo bracket (not for FXDWG) ( T) Chrome Diecast Headlight Mounting Brackets These heavy duty chrome diecast headlight brackets are available for most XL, FX, and FXR models through Two indicator holes (1/2 diam.). Fits FX, FXR, and XL models using 1/2 indicators. ( ) Note: When fitted to pre-1974 models indicator holes must be enlarged to 5/8 870 No indicator holes. Fits XL, FX, and FXR models without indicators. ( and ) Large indicator hole ( ) 9783 Headlight Visor Plugs Fits diecast headlight mounting visors Sold in 5 packs ( ) Indicator Decal (Each) Hole, neutral-oil pressure XL-FX 1973-on ( ) Headlight Visor Mount Bolts Use on all FX, XL, FXR narrow front ends 1959-on Acorn 5308 Cap 9783 Allen Red Indicator Lamps PCP Type Hi-Beam ( ) Red lense for above ( A) Gen ( ) Indicator Lamps Fit visors and dash for high beam, neutral and generator. PCP Type Application Colour Neutral FX-XL ( ) Green Oil FX-XL ( ) Red 1342 Hi beam FXS ( B) Red PRESTON CYCLE PRODUCTS INC. 3A-7

8 Spot Lamps Spotlamp Kits for Spring Fork Kit includes chrome mounting brackets, two early spotlamps with 6V bulbs and integral switches to fit Spring Fork models with shocks. Hardware required to mount lamps to bracket and assembly to fork is also included. Kit features on/off switch with leads that clamps on to handlebar and a one piece chrome spotlamp bar. Does not include turn signals Fits BT and 45 Spring Fork cycles Spotlamp Kits for FLH Glides Kits includes chrome mounting bracket(s), two spotlamps with genuine Wagner single filament clear seal beams and the hardware required to mount lamps to bracket and assembly to fork. Does not include turn signals Fits and has two-piece brackets which mount to right and left sides Switch 4-½ Replica 12V Spotlamp Kit Kit includes two 12V 4-½ replica spotlamps with clamps, toggle switch and hardware. Mounts to front engine bar Chrome Spotlamp Set Spotlamps include clear single beam bulbs and mount spacer. Fits FL and 1979-on FLT A-8 PRESTON CYCLE PRODUCTS INC.

9 Spot Lamps Chrome Spot Lamps with Halogen For FL models /2 spot with 35W H /2 spot with 55W H3 6V Early Spotlamp Fits Spring Fork and BT Glide. Complete with clamps and togle switch Springer Spotlight Replaces for all Springer forks, 12 volt bulb type, Glides Spotlight 4359 Replacement bulb 12-v Volt bulb ( ) Chrome 12 V Spot Lamp Assemblies Stock replacement spot lamp assemblies for OEM Fits FL, FLST and custom applications 1949-on. Sold each Clear, fluted, sealed beam Clear, non-fluted, sealed beam Black Spotlamp Assembly Black 12 volt spotlamp set with clear single beam. Fits FL & FLT 79-on. Set of Replica Chrome Spotlamp Set Replica of the early Guide RH-5 spotlamp including swivel, hardware and factory markings V Spotlamp assembly ( ) Swivel set with hardware ( ) PRESTON CYCLE PRODUCTS INC. 3A-9

10 Spot Lamps 6549 Clear Fluted Chrome 12 volt late style Spotlight assembly. Fits FL (Seal beam not included) ( ) Fluted sealed beam ( ) Clear sealed beam ( ) 5499 Late spotlight rim ( ) Spot Lamp Bulbs Single filament seal beam type. Replace , in clear for stock OEM Spot lights 1964-up type. PCP Type Lense Volt Clear Volt Clear Volt Clear amber Volt Fluted amber Volt Clear fluted Volt Clear fluted ( ) Custom Driving Light Chromed 4-1/2 driving light with heavy duty bottom mount. Shell only with a high beam indicator light Replica Spotlamp Parts Switch set for EL, FL (pair) Swivel set for EL, FL (for 2 lamps) Toggle Switch This switch will handle 6 or 12-volts, up to 35 amps. Uses spade terminals and comes with an on/off face plate. It is most commonly used for spotlights on FL models from AMP ( , ) On/Off toggle switch without leads ( ) On/Off toggle switch with leads Spotlamp Bracket & Nuts Black spot lamp bracket ( ) Nuts (pair) A-10 PRESTON CYCLE PRODUCTS INC.

11 Spot Lamps Spot Lamp and Signal Light Kit FL Clear Early Spot Lamp Bulbs Single filament bulb. PCP Application V ( ) V ( ) V Spot Lamp Support Bars Chrome replacement spotlamp mounting bars (A) Fits FL 4 speed models ( ) (A) Hole plugs for above ( A) (pair) (B) Custom, FLST style spots to fit FLH width cowling (B) FXWG includes brackets which mount to lower pinch bolts Spotlamp clamps only Early Spot Light Brackets Chrome plated reproductions of the FL style (used without a fairing). Replaces OEM & Pair Chr. Spot Light Bracket Set Fits all XL and FX-FXE Spot Light Mounting Brackets Chrome plated brackets mount spotlamps to the front forks. Fit FL models from and BT , (pairs) PRESTON CYCLE PRODUCTS INC. 3A-11

12 Bulbs H-4 Quartz Bulb Halogen type fits 5-3/4 plus 7 units sold each. PCP Wattage (L-H) / / /55 (Heavy Duty) Caution: Do not touch any halogen bulb with bare hands during installation or replacement. The manufacturer advises that the light unit not be washed with a water hose as it is not a sealed beam unit. XENON Boosted H-4 Bulb H-4 bulbs offer superior night visibilty. Produces a higher light output. Special blue coating increases the whiteness of the light with only a trace of blue /55W /55W Caution: Do not touch any halogen bulb with bare hands during installation or replacement. The manufacturer advises that the light unit not be washed with a water hose as it is not a sealed beam unit. Replacement Bulbs PCP Volt Application (10 packs except where noted) Brake & taillight (1154) ( ) Brake & taillight (1157) ( ) clear As above but halogen (each) Directional (single) ( B) Directional (dual) ( ) Bullet lite (single) Bullet (dual filament) Speedo, FX, 1980-on FXWG, hi-beam ind on XL s 1965-on FL, speedo-tach 1965-on XL s, Speedo All FX s ( ) Hi-Beam ind XL s, 1983-on FLH, 1980-on FXWG, 1973-on All FX s ( A) Speedo-tach 1983-on XL s, 1984-on FXR, 1983-on FX s Hi-Beam ind on XL ( ) Turn signal ind on FXWG, FX, 1965-on FL ( ) Tachometer 1974-on all FX high-beam indicator Bates style headlamp ( ) Mini-guage Vosla Xenon H4 Headlamp Bulbs Double the light output of a standard OE halogen H4 bulb without increasing wattage or amperage drawn. Use will not require wiring upgrade Lazer LED Bulbs Features coloured LEDs with clear band for license plate. PCP Application on Tail-brake on Signal Red Brake 12 Volt LED Bulbs Bulbs are not affected by vibration for long lift. Available in 1157 (brake and taillight). Rotating type features LED s that rotate and reverse direction every two seconds and when brake light is activated the LED s pulse 2 times per second rotator Rainbow Strobe Insert Allows lamp to radiate a soft, coloured light to alert drivers. For H-4 halogen bulbs (not included) Each 3A-12 PRESTON CYCLE PRODUCTS INC.

13 Fender Lights Front Fender Rail Light Kit Increase your visibility using our 12 volt amber running lights that mount to the front fender rail on FL and FLT 1973-on. Installation is quick and easy, just wire the kit to the stock fender tip light. Sold in pairs Lighted Fender Tips Replaces OEM items on 1979-on FLT in chrome plastic with lights installed Front fender light ( ) Front lens only ( ) Rear fender light ( ) Rear lense only ( ) Front fender tip grill FL Front amber lense with blue dot Indian Face Front Fender Lamps, 12V White lens Universal Front Fender Light Die-cast, chrome and complete with mounting gasket, concealed mounting hardware and extra long wire leads Volt ( T) Early Fender Lights for Harley Front fender ( ) and Sidecar fender ( ) Volt, white lens Side Car Mud Flap Light Chrome with large clear lens and red small lens. Replaces Volt, BT Side Car Glass Lenses For show use only on antique applications, not D.O.T. approved. PCP OEM Description Rear, clear Rear, clear Rear, red Rear, red Rear, clear Rear, red Taillamp, frosted Head lamp, clear (imported) Spot lamp, clear Front Fender Lamp with Clear Lens 1949-on PRESTON CYCLE PRODUCTS INC. 3A-13

14 Taillights Tombstone 12V Taillight A diecast reproduction offered with plastic red lense, and universal mounting for most applications. Note: Not DOT approved and not recommended for use on motorcycles newer than Chrome 12 volt assembly ( C) As above, black ( B) 1290 Red plastic lens with gasket ( ) Red glass lens with gasket ( ) Clear top lens, glass ( ) Clear top lens, plastic ( ) Chrome lense rim ( ) Chrome Tombstone Taillight Includes skull rim lens grill, diecast chrome taillamp license plate bracket and chrome plated steel adapter plate which will mount to all BT and XL stock rear fenders. PCP Item Application Taillamp w/rim Custom Kit Chrome Complete Tombstone LED Taillight Complete assembly includes a license plate mount bracket Skull Face Tombstone Lamp Features diecast construction with LED board. PCP Colour Clear Tombstone Taillight Kit for 1973-on Stock Fender New classy look for 1973-on FL style fenders. This kit includes our #798 chrome diecast taillight and a new custom mount base (with gasket & hardware) to place on the raised stamping of 1973-on rear taillights. Fits 1973-on style Big Twin rear fenders for FL,FLT,FLHT,FLHS models and XL Complete kit Mount base only A-14 PRESTON CYCLE PRODUCTS INC.

15 Taillights Beehive Taillight (12V) A classy reproduction of the early Harley taillight. Universal fender mounting for most applications. Includes chrome license mount, black rubber mounting gasket and 12 volt bulb. Chrome or black finish housing. Not DOT approved. 799 Chrome complete taillight As above, black ( ) Red plastic lens Clear glass lens ( ) Red glass lens ( ) FX-FL-XL 1973-on Taillight PCP OEM Item Mount nuts (10 pack) A Complete light Lens gasket (5 pack) Lens screws BT 1973-on, XL (10 pack) Lens only Beaded rubber base gasket (each) Base gasket to fender (10 pack) Clear bulb, 12 volt dual (10 pack) Light and Bracket Kit Chrome 3 piece license plate bracket and the early chrome taillight assembly Beaded Edge Taillight Gaskets Molded from black rubber, these form fit taillight shell to fender for a vibration and water proof seal. USA made (each). PCP Application on FX-XL FL Taillight ( ) FX-FX FL Taillight ( BE) Front fender lamp ( ) Tombstone ( ) Front fender and side car lamp ( ) Beehive ( ) Stock Type Taillight PCP Item 1278 Chrome light, complete ( B) Fender light gasket ( ) Molded fender gasket ( BE) Rear lens gasket ( ) (10 pack) 801 Red plastic lens ( ) 4944 Blue dot red plastic lens ( ) 2210 Clear top lens ( A) 3856 Lens-rim-screws (kit) Top lens gasket ( ) (10 pack) Rear lens chrome rim ( ) Red glass lens ( ) Lense screws ( ) (10 pk) PRESTON CYCLE PRODUCTS INC. 3A-15

16 Taillights Cateye Taillight Mount Kit FXWG 1980-on Replica Sparto Taillight Lamps feature a red lens with a clear license plate window Polished Chrome Round Stop Taillamp Round style taillamp like the one s used on early bobbers Taillamp Fender mounted bracket for above taillamp Cateye Chrome Taillight -Universal Heavy-duty, almost vibration proof. 884 Classic 12-volt Cateye taillight with red lens Complete LED assembly 4946 Cateye red lens with jewelled blue-dot lens 1265 Replacement standard red lens 1266 Replacement license plate white lens Chrome stamped grill Chrome stamped grill Gasket (10 pack) Bates Style Round LED Taillight Sold each. Chrome Black Lens Red Stylish Chrome Taillight Grills Eagle design Slotted cateye grill Lens Screws PCP Application (10 packs) All Twins taillight 1973-on ( ) 3A-16 PRESTON CYCLE PRODUCTS INC.

17 Taillights Custom Taillight and License Mount Side mounts are universal fits right or left side. Heavy-duty steel, beautifully chromed Side mount taillight 4591 Fender mount taillight 2236 Taillight only 4358 Lense only 2032 WideBob1 & 2 Custom Taillight Bracket We offer the WideBob1 or WideBob2 under fender taillight and license plate mounting brackets for custom applications. Extra wide slotted mounting holes allow many custom taillights to be installed. The WideBob1 bracket works best for FX/XL width rear fenders, such as #6025 while the wider WideBob2 custom bracket works best for FL/FXWG width rear fenders such as #6006. Lights not included WideBob1 bracket (6.5 wide, 3 hole) FX&XL 1231 WideBob2 bracket FXWG (7 wide, 2 hole) Chrome Rear Stop Light Switches Chromed mechanical stop light switches feature steel construction, support plates and chrome plating. Ideal for replacing wornout stock parts or when building a ground-up project. PCP Fits 4860 FX, FXE, FXS push-off style ( A) XL models pull-on style ( ) 2177 BT models pull-on style ( T) 2176 Sportster push-off style ( T) Sportster and K models push-off style ( ) XLCH push type kit Pull Springs for Above Switches (sold in 5 packs) XLH-XLCH ( ) XLH-XLCH ( ) Taillight Brackets for Fat Bob Fenders These taillight brackets are reproductions of the OEM brackets fitting FXWG from 1980-on Black taillight bracket ( A) Chrome taillight bracket ( TA) Red Reflector (each) ( ) Chrome Brake Light Switch Kit Mechanical, pull-type brake light switch kit fits Knucklehead and FL. Replaces OEM# Order mounting kit separately PRESTON CYCLE PRODUCTS INC. 3A-17

18 License Plate Chrome License Plate Frames These chrome diecast license plate frame features embossed eagle with Live to Ride (with black background). Mounting holes measure 5-7/8 x 2-3/4 centre-to-centre. The rear of the frame is recessed to accept a license plate of up to approximately 7 x 5. Fits all models (except FXWG and FXST). 7-1/4 x 4-1/4 standard size. PCP Finish Chrome Eagle-Spirit Gold Inlay Eagle-Spirit Chrome Live to Ride Gold Inlay Live to Ride Deluxe chrome Deluxe gold inlay Standard chrome Chrome backing plate 7-9/16 W x 4-1/2 H mounting holes 6-7/8 C/C 2-3/4 C/C License Plate Frame With Marker Lights Chrome frame features built-in vertical amber marker lights. Single filament bulbs can be wired as marker lights or turn signals. Measures 8-7/8 OAW x 4-1/4 H. Holes are 5-3/4 c/c and 2-3/4 c/c. Frame is recessed for 7-1/4 wide plates Chrome Dresser Light Bar Chrome lamp bar with four, bulb type, red bullet lights and backing plate for 4 x 7 license plates. Mounts to stock plate bracket FL Chrome Eagle Spirit Lighted License Frame Chrome license plate frame includes a built-in red light for an extra measure of safety. Made from chrome plated heavy diecast metal. The central red light may be wired as an additional brake light or running lamp Chrome Chrome with gold plating License Plate Mounting Kit 1813 Acorn style 9871 Custom flat allens 9872 Button allen Reflectors Adhesive Backed OEM type, DOT approved PCP Colour Description Red Rear tail light bracket ( ) (each) Rocket License Plate Mini LED Mounting Bolts Surface mount diode type 12 volt, 18 watt, LED lights with M6x1.0 threads. Set of two A-18 PRESTON CYCLE PRODUCTS INC.

19 License Plate Chrome License Plate Mounting Bracket Kit One-piece chromed diecast license plate mount replacing the stamped sheet metal license plate mount and bracket on the rear fender. Rubber spacers cushion the license plate from vibration, and allows the mount to follow the profile of the fender, for a cleaner look. Mounts directly to the stock hole pattern on all HD rear fenders 1955-on (except FXWG) Complete with hardware License Plate Bracket Chrome license plate bracket (mounting above taillight) as used on all Harley Sportster and Big Twin models 1955-up (except FXWG and FXST) Early 2 hole ( A) As above, black finish 703 Late 3 hole ( ) Red reflector (each) ( ) Taillight bracket pad, prevents scratching of rear fender ( ) (5 pack) Skull-Head Krometts - 5 Packs Chrome kromett Chrome w/red eyes License Plate Reflectors Reflectors measure 3/4 across the face and a 5/8 long stud with a tension spring and wing nut holds the plate firmly. Classic 50 s styling Amber (4 pack) Skull Krommets PCP Eye Colour Amber Krommett-Light Studs 12 volt mini lamps with Krommett base to attach license plates and accessories. Sold in set of Amber Red Blue Chrome Skull Bolts ¼ -20 x ¾ Studs with nuts. Replaces Pack Chrome Maltese License Plate Mount Bolt Set Features 1/4 x 20 Nyloc nuts. 4 Pack PRESTON CYCLE PRODUCTS INC. 3A-19

20 Visors Chrome Light Visors Smartly designed and easy-to-install chrome visors 439 Fits 7 FLH headlight (each) ( T) 1420 Fits 5-3/4 headlight, XL-FX Bates (ea) ( T) FLH spotlight (pair) ( T) 438 1¾ Bullet light (10 pack) ( T) FL, XL rear taillight (each) ( T) FL turn signal (pair) ( T) Chrome Frenched Trim Rings Trim rings gives the headlight a recessed look and will not work with headlamp visors. Headlight Rings XL ( ) Spot Lamp & Turn Signal Rings Spotlight 1962-on ( B) (pair) 7 Headlight Visor This custom chrome plated visor is just the right finishing touch for our Glide ( ) headlight unit. FORMED AS PICTURED! Light sold separately headlight (each) (shown) /2 for early fork head lamps Taillight Covers / Visors 1973-on Chrome taillight covers feature a cut-out license plate illumination. Covers fit over the taillight on 1973-on models FX, XL, Smooth ( T) 4949 FXWG w/inverted light, smooth ( T) Chrome Deco Spot Lamp Visor Visors have a beaded edge and are sold in pairs Installed 3A-20 PRESTON CYCLE PRODUCTS INC.

21 Lens-Trim 2932 Chrome Slotted Turn Signal Trim Rings These trim rings are made from chrome-plated stamped steel and fit both OEM and aftermarket turn signals. They look great on plain lenses but look really nice when combined with jewelled blue dot lenses and taillight trim rings. Trim rings are easy to install and are available for most XL, FX and FXR models from Solid in pairs Early-style. Fits all XL, FX and FXR models (except FXRT) front and rear turn signals Chrome Trim Rings and Taillight Grills 2932 Fits all models from 1973-on Blue Dot Grill Kits 3003 Fits all models from ot Trims Rings 3005 Fits all models from Chrome Slotted Turn Signal Trim Rings These trim rings are made from chrome-plated stamped steel. They fit all OEM and aftermarket turn signals and look really nice when combined with jewelled blue dot lenses and taillight trim rings. Two versions offered, the early and late model flat lenses fitted to the turn signal assemblies on most FL models Sold in pairs Early-style. Fits FLH and FLT/FLHTs Installed on #57300 Chrome Grill for Custom Tail Lights Chromed, stamped steel custom tail light grill comes ready to install custom taillight lens, with or without blue dot Chrome Turn Signal Trim Rings Chrome plated stamped steel and easy to fit on both the OEM and aftermarket turn signals. Pairs. (pairs) 3006 Early-style. Fits all XL, FX and FXR models (except FXRT) front and rear turn signals ( T) Blue Dots Blue dots with chrome rims 4500 Blue Dots (pair) 3479 Gold Dots (pair) Blue Dot Type Lens Lense with Blue Dot installed on Acrylic Cateye 4942 XL-FX Signal (amber) (each) 4991 XL-FX Signal (red) (each) 4943 FL-FLH Signal FLH red (each) FL-FLH Signal FLH amber (each) PRESTON CYCLE PRODUCTS INC. 3A-21

22 Turn Signals Custom 12V Accessory Lights 4972 Red (double contact) 4973 Amber (double contact) ( A) 4974 Replacement bulb (box of 10) 4975 Red replacement lens (each) ( ) 821 Amber replacement lens (each) ( ) 4943 Red lens with blue dot (each) Amber lens with blue dot (each) FLH Turn Lamp Mounting Kit Chrome light mounting kit for turn signal lights 1968-on, complete with chrome base, clamp and mounting bolt. Necessary for mounting turn signal below spot lamp unit Kit ( ) Pair of clamps only Stand-off only ( ) Bates Style Bullet Turn Signal Set Features a plastic amber lens. Sold in set of 2. Chrome Black Lens Amber Red FLH Turn Signal Complete assembly with lens and 12V bulb. Replaces OEM # Single contact, amber lens 4968 Replacement bulb ( B) (box of 10) Turn Signal Relocation Kit for FXWG Relocates the rear turn signals further back to allow for saddlebags. Fits FXWG models Replaces OEM A A-22 PRESTON CYCLE PRODUCTS INC.

23 Turn Signal 4993 Complete Turn Signal Kits Includes early model ( ) housings with amber lenses and single-filament bulbs, clamps and support hardware necessary to mount the turn signal housings to handlebars and fender struts 6541 Kit Early-Style Amber Turn Signal Replacement turn signal units for FX, FXR and Sportster models from 1973-E84, with single filament. Each Unit with threads & 1 wire ( ) 4993 Unit with threads & 2 wires 4954 Unit, no threads ( A) 802 Amber lens only ( ) 803 Red lens only 4991 Red lens with blue dot Amber lens with blue dot Turn Signal Relocation Kit for FXR & XL Models Allows relocation of the rear turn signals further back to put on saddlebags. Fits XL models and FXR models Replaces OEM A. Note: required for proper turn signal fit when using our #3544 and #3614 saddlebag support kits Turn Signal Mounting Hardware A selection of chrome turn signal mounting components to fit most Harley models from 1973-on Handlebar clamp with screws ( , A) Rear support with screw ( ) Bracket between turn signal lamp and handlebar clamp ( ) Stud with spacer ( A) Saddlebag Signals NOS stock FLT Sold each Turn Signal Parts, Available in 10 packs PCP Item Gasket ( ) 4968 Bulb, 12V single ( B) Screws ( ) Front Turn Signal Handlebar Mounting Bracket Replaces OEM and Fits all 1973-on FX s and XL s with turn signals mounted on handlebars PRESTON CYCLE PRODUCTS INC. 3A-23

24 Turn Signals Chrome Rear Directional Signal Mount Bars Formed and welded steel mount bars resist vibration FL ( TB) As above, 4 shorter Black rear turn signal bracket FL Turn Signal Mounts These parts stick out the furthest and break first, so we made them stronger. Chrome unless noted polished. PCP OAL Application C/C FLH ( B) 5-7/ As above ( ) 5-7/ / FLH ( ) 5-7/ FXRD ( B) 3-3/ / FXRD, FXR 3-11/ /8 Polished FLH ( ) 5-1/ /8 FLH ( ) 5-1/8 Chrome Short Rear Turn Signal Mounts Mounts allow turn signals to be moved in by 1-1/2 on each side. Fits FX, XL models Pair Bullet Light Mounting Kit This kit allows quick and easy installation of our custom bullet marker lights on most rear fender struts and Big Twins/XLs to 1987 with 35mm Narrow Glides front forks. Includes 4 chrome plated mounting blocks and the necessary hardware to install the bullet lights piece mounting kit 3469 Shortie Chrome Rear Turn Signal Mount Brackets Aluminum brackets that bring the signals closer to the fender for a cleaner look. Fits BT 4 speeds Brackets with no hardware 3480 FLH Signal Brackets Front or rear use on FLH 1963-on, chrome plated, pairs ( B) 3480 Straight ( ) 3A-24 PRESTON CYCLE PRODUCTS INC.

25 Turn Signal Turn Signal and Hazard Flashers Stock replacement flasher units for turn signals and hazard lights on all models from 1965-on. PCP Use Volt OEM Type Turn signal A Round Turn signal A Rectangle 28007* Turn signal A Rectangle Turn signal A Round Hazard B Round *Plastic casing Related Parts 3999 Mounting clip w/rivet 1973-on(9952) (5 pack) Flasher connector and mount Rear Turn Signal Kit Fits FLST, FXST, FLH, FLT. Includes red/amber LED bulb lamps LED lamp kit Baby Bullet Light Chrome light with glass lense measures 1-1/8 diameter x 2-1/4 from tip to top with a 5/16-18 x 1 long mounting stud. Sold in pairs Amber Chrome Mini 12 Volt LED Bullet Lamp Sets Measures 1 W x 3 L x 1-1/2 H. Sold in pairs Amber 2 wire Blue 1 wire Red 2 wire Clear 1 wire Mini Speeder Bullet Lamp Set Includes red lenses Single Dual Chrome Mini Bullet Lamp Sets Lamps measure 1 W x 3 L x 1-1/2 H. PCP Colour Amber Blue, 1-wire Red Clear PRESTON CYCLE PRODUCTS INC. 3A-25

26 Marker Lights Note: These lights may be insufficient for good visibility. Recommended only for additional lighting to the OEM lights Custom Bullet Marker Lights (each) 815 Red light (single filament bulb) 3179 Amber light (single filament bulb) 4965 Bulbs (10 pack) 3222 Red light with visor (dual filament bulb) 3221 Amber light with visor (dual filament bulb) 4964 Bulb (10 pack) Bomber Light Diecast Bullet style light with 3 fins, and visor built-in. Truly deluxe amber lens. Order different coloured lenses separately. (single filament bulbs) 4951 Amber Replacement Bulb 4964 Dual filament (box of 10) 4965 Single filament (box of 10) Bullet Light Visors For 1-3/4 lights pack Bullet Light Plastic Lens Only Will fit either standard bullet light or super Marker light. PCP Colour 816 Amber (each) 817 Blue (each) 818 Red (each) Bullet Lite with Stem-12V Can be utilized as signal, or as brake-signal with dual filament. Red lens Single filament 4965 Bulb (10 pack) 4953 Double filament 4964 Bulb (10 pack) Bullet Lights with Mounting Brackets (1 Wire) Classic styling of the red bullet marker light with a built-in chrome mounting bracket. A single filament bulb, either a left or right side mount Red lights with R & L mounts ( ) (pair) Amber light with right side mount (ea) Amber light with left side mount (ea) 4965 Single filament bulbs 12V (box of 10) 816 Amber lens (ea) 817 Blue lens (ea) 818 Red lens (ea) Dual Auxiliary Light Mount A universal chrome mounting bar that mounts on all rear license plate brackets. Perfect for mounting any two auxiliary bullet lights, taillights, brake lights or running lights Chrome Bullet Lamp Visor Chrome bullet lamp ring features a built in visor and will fit standard lamps. Pair Bullet Light- Single Filament These chrome bullet lights feature a built-in 360 degree turnable visor with a clear and an extra lense. Pairs Grooved (blue) Smooth (yellow) Bulb set 3A-26 PRESTON CYCLE PRODUCTS INC.