DISTRIBUTION DESIGN CATALOGUE
|
|
|
- Rudolf Griffith
- 5 years ago
- Views:
Transcription
1 DISTRIBUTION DESIGN CATALOGUE Section 06 ST Stays HPC-1DC For application to Horizon Power Electricity Distribution Networks
2 Document Control Author Name: Paul Savig Position: Senior Standards Engineer Document Owner (May also be the Process Owner) Name: Position: Paul Savig Senior Standards Engineer Approved By * Name: Jose Duarte Position: Engineering Services Manager Date Created/Last Updated July 2018 Review Frequency ** Annually Next Review Date ** July 2019 * Shall be the Process Owner and is the person assigned authority and responsibility for managing the whole process, end-to-end, which may extend across more than one division and/or functions, in order to deliver agreed business results. ** Frequency period is dependent upon circumstances maximum is 5 years from last issue, review, or revision whichever is the latest. If left blank, the default shall be 1 year unless otherwise specified. Revision Control Revision Date Description 1 015/03/2011 Original Horizon Power issue 2 09/06/2014 Original Horizon Power issue 3 12/07/2018 Eyebolt changed STAKEHOLDERS The following positions shall be consulted if an update or review is required: District Managers Manager Asset Management Services NOTIFICATION LIST The following positions shall be notified of any authorised change: Project Director, Major Projects Project Director, Engineering & Project Services All Other Key Groups outside of Operations Document Title: Distribution Design Catalogue Page 2 of 15 Issue Date: 03/08/2018
3 STAYS LIST ST1_19/200 ST1_19/200_C ST1_19/275 ST1_19/275_C ST2_19/200 ST2_19/200_C ST4 ST4_C ST5 ST5_C Ground stay 19/2.00 Pole bolted (11, 12.5m Poles) Ground stay 19/2.00 Pole clamped (11, 12.5m Poles) Ground stay 19/2.75 Pole bolted (11, 12.5m Poles) Ground stay 19/2.75 Pole clamped (11, 12.5m Poles) Aerial stay 19/2.00 Pole bolted (11, 12.5m Poles) Aerial stay 19/2.00 Pole clamped (11, 12.5m Poles) Outrigger stay LV or HV 19/2.00 Pole bolted (11, 12.5m Poles) Outrigger stay LV or HV 19/2.00 Pole clamped (11, 12.5m Poles) Outrigger stay LV/HV tee off 19/2.75 Pole bolted (11, 12.5m Poles) Outrigger stay LV/HV tee off 19/2.75 Pole clamped (11, 12.5m Poles) Document Title: Distribution Design Catalogue Page 3 of 15 Issue Date: 03/08/2018
4 Document Title: Distribution Design Catalogue Page 4 of 15 Issue Date: 03/08/2018
5 Document Title: Distribution Design Catalogue Page 5 of 15 Issue Date: 03/08/2018
6 ST1_19/200 Ground stay 19/2.00 Pole bolted (11, 12.5m Poles) 1 AB6035 eyebolt 20 dia x 300 mm lg with nut and washers 1 ea 2 OT0064 rope thimble 20 mm 2 ea 3 CF0664 Helical termination steel 19/ ea 4 ES0062 stay wire 19/2.00, 15 m coil 1 coil 5 IA0053 stay insulator 1 ea 6 OG mm saddle clamp wire rope 1 ea 7 CG0005 UPVC stay protector 1 ea 8 CA0150 rod anchor 1 ea 2.1 m 9 CA0026 screw anchor 200 mm 1 ea 10 CA9050 thimble eye nut 1 ea ST1_19/200_C Ground stay 19/2.00 Pole clamped (11, 12.5m Poles) 1 CB3041 stay clamp with 4 x M20 bolts 65 mm lg, nuts and 1 ea washers 2 OT0064 rope thimble 20 mm 2 ea 3 CF0664 Helical termination steel 19/ ea 4 ES0062 stay wire 19/2.00, 15 m coil 1 coil 5 IA0053 stay insulator 1 ea 6 OG mm saddle clamp wire rope 1 ea 7 CG0005 UPVC stay protector 1 ea 8 CA0150 rod anchor 1 ea 2.1 m 9 CA0026 screw anchor 200 mm 1 ea 10 CA9050 thimble eye nut 1 ea Document Title: Distribution Design Catalogue Page 6 of 15 Issue Date: 03/08/2018
7 ST1_19/275 Ground stay 19/2.75 Pole bolted (11, 12.5m Poles) 1 AB6035 eyebolt 20 dia x 300 mm lg with nut and washers 1 ea 2 OT0064 rope thimble 20 mm 2 ea 3 CF0662 Helical termination steel 19/ ea 4 ES0061 stay wire 19/2.75, 15 m coil 1 coil 5 IA0053 stay insulator 1 ea 6 OG mm saddle clamp wire rope 1 ea 7 CG0005 UPVC stay protector 1 ea 8 CA0150 rod anchor 1 ea 2.1 m 9 CA0028 screw anchor 300 mm 1 ea 10 CA9050 thimble eye nut 1 ea ST1_19/275_C Ground stay 19/2.75 Pole clamped (11, 12.5m Poles) 1 CB3041 stay clamp with 4 x M20 bolts 65 mm lg, nuts and 1 ea washers 2 OT0064 rope thimble 20 mm 2 ea 3 CF0662 Helical termination steel 19/ ea 4 ES0061 stay wire 19/2.75, 15 m coil 1 coil 5 IA0053 stay insulator 1 ea 6 OG mm saddle clamp wire rope 1 ea 7 CG0005 UPVC stay protector 1 ea 8 CA0150 rod anchor 1 ea 2.1 m 9 CA0028 screw anchor 300 mm 1 ea 10 CA9050 thimble eye nut 1 ea Document Title: Distribution Design Catalogue Page 7 of 15 Issue Date: 03/08/2018
8 Document Title: Distribution Design Catalogue Page 8 of 15 Issue Date: 03/08/2018
9 ST2_19/200 Aerial stay 19/2.00 Pole bolted (11, 12.5m Poles) 1 AB6035 eyebolt 20 dia x 300 mm lg with nut and washers 2 ea 2 OT0064 rope thimble 20 mm 2 ea 3 CF0664 Helical termination steel 19/ ea 4 ES0062 stay wire 19/2.00, 15 m coil 1 coil 5 IA0053 stay insulator 1 ea ST2_19/200_C Aerial stay 19/2.00 Pole clamped (11, 12.5m Poles) 1 CB3041 stay clamp with 4 x M20 bolts 65 mm lg, nuts and 2 ea washers 2 OT0064 rope thimble 20 mm 2 ea 3 CF0664 Helical termination steel 19/ ea 4 ES0062 stay wire 19/2.00, 15 m coil 1 coil 5 IA0053 stay insulator 1 ea Document Title: Distribution Design Catalogue Page 9 of 15 Issue Date: 03/08/2018
10 Document Title: Distribution Design Catalogue Page 10 of 15 Issue Date: 03/08/2018
11 ST4 Outrigger stay LV or HV 19/2.00 Pole bolted (11, 12.5m Poles) 1 CA0026 screw anchor 200 mm 1 ea 2 CA0150 rod anchor 1 ea 2.1 m 3 CA9050 thimble eye nut 1 ea 4 OT0064 rope thimble 20 mm 4 ea 5 CF0664 Helical termination steel 19/ ea 6 ES0062 stay wire 19/2.00, 15 m coil 1 coil 7 IA0053 stay insulator 1 ea 8 CB0476 outrigger bracket 1 ea 9 FM0900 clamp loop steel saddle mount 270 mm 2 ea 10 CG0003 UPVC stay protector helical split style 1 ea 11 AB6035 eyebolt 20 dia x 300 mm lg with nut and washers 1 ea 12 OG mm saddle clamp wire rope 1 ea ST4_C Outrigger stay LV or HV 19/2.00 Pole clamped (11, 12.5m Poles) 1 CA0026 screw anchor 200 mm 1 ea 2 CA0150 rod anchor 1 ea 2.1 m 3 CA9050 thimble eye nut 1 ea 4 OT0064 rope thimble 20 mm 4 ea 5 CF0664 Helical termination steel 19/ ea 6 ES0062 stay wire 19/2.00, 15 m coil 1 coil 7 IA0053 stay insulator 1 ea 8 CB0476 outrigger bracket 1 ea 9 FM0900 clamp loop steel saddle mount 270 mm 2 ea 10 CG0003 UPVC stay protector helical split style 1 ea 11 CB3041 stay clamp with 4 x M20 bolts 65 mm lg, nuts and 1 ea washers 12 OG mm saddle clamp wire rope 1 ea Document Title: Distribution Design Catalogue Page 11 of 15 Issue Date: 03/08/2018
12 Document Title: Distribution Design Catalogue Page 12 of 15 Issue Date: 03/08/2018
13 ST5 Outrigger stay LV/HV tee off 19/2.75 Pole bolted (11, 12.5m Poles) 1 CA0028 screw anchor 300 mm 1 ea 2 CA0150 rod anchor 1 ea 2.1 m 3 CA9050 thimble eye nut 1 ea 4 OT0064 rope thimble 20 mm 4 ea 5 CF0662 Helical termination steel 19/ ea 6 ES0061 stay wire 19/2.75, 15 m coil 1 coil 7 IA0053 stay insulator 1 ea 8 CB0476 outrigger bracket 1 ea 9 FM0900 clamp loop steel saddle mount 270 mm 2 ea 10 CG0003 UPVC stay protector helical split style 1 ea 11 AB6035 eyebolt 20 dia x 300 mm lg with nut and washers 1 ea 12 OG mm saddle clamp wire rope 1 ea ST5_C Outrigger stay LV/HV tee off 19/2.75 Pole clamped (11, 12.5m Poles) 1 CA0028 screw anchor 300 mm 1 ea 2 CA0150 rod anchor 1 ea 2.1 m 3 CA9050 thimble eye nut 1 ea 4 OT0064 rope thimble 20 mm 4 ea 5 CF0662 Helical termination steel 19/ ea 6 ES0061 stay wire 19/2.75, 15 m coil 1 coil 7 IA0053 stay insulator 1 ea 8 CB0476 outrigger bracket 1 ea 9 FM0900 clamp loop steel saddle mount 270 mm 2 ea 10 CG0003 UPVC stay protector helical split style 1 ea 11 CB3041 stay clamp with 4 x M20 bolts 65 mm lg, nuts and 1 ea washers 12 OG mm saddle clamp wire rope 1 ea Document Title: Distribution Design Catalogue Page 13 of 15 Issue Date: 03/08/2018
14 APPENDIX A REVISION INFORMATION (Informative) Horizon Power has endeavoured to provide standards of the highest quality and would appreciate notification if any errors are found or even queries raised. Each Standard makes use of its own comment sheet which is maintained throughout the life of the standard, which lists all comments made by stakeholders regarding the standard. The document HPC-1DC COM CS# can be used to record any errors or queries found in or pertaining to this standard, which can then be addressed whenever the standard gets reviewed. Date Rev No. Notes 12/07/ Index List Description (11, 12.5m Pole) added (11, 12.5m Pole) added to all Lists AB6035 replace AB6037 in lists ST1_19/200, ST1_19/275, ST2_19/200, ST4 & ST5 Pole Bolted 21/01/ Index List Description Pole Bolted added to ST1_19/200, ST1_19/275, ST2_19/200, ST4 & ST5 Concrete pole changed to Pole Clamped on ST1_19/200_C, ST1_19/275_C, ST2_19/200_C, ST4_C & ST5_C ST Index Drawing ST5 changed to reflect drawing ST5 ST1 Drawing Steel changed to Pole Bolted Concrete changed to Pole Clamped Item (3) added above stay insulator Item (2) added above thimble eye nut Ground line added Comment (installed over 3) removed ST1 List Pole Bolted added to ST1_19/200, ST1_19/275 Concrete pole changed to Pole Clamped on ST1_19/200_C, ST1_19/275_C ST2 Drawing Steel changed to Pole Bolted Concrete changed to Pole Clamped 3000 dimension removed Poles now dashed ST2 List Pole Bolted added to ST2_19/200 Concrete pole changed to Pole Clamped on ST2_19/200_C ST4 Drawing Steel changed to Pole Bolted Concrete changed to Pole Clamped Item (4) added above thimble eye nut Comment (installed over 5) removed All dimensions removed Document Title: Distribution Design Catalogue Page 14 of 15 Issue Date: 03/08/2018
15 Date Rev No. Notes Notes added (1-Bandit straps to be used) Poles now dashed Item (7) stay insulator moved to below outrigger ST4 &ST4_C Lists Pole Bolted added to ST4 Concrete pole changed to Pole Clamped on ST4_C ST5 Drawing Steel changed to Pole Bolted Concrete changed to Pole Clamped Item (4) added above thimble eye nut Item (12) and (6) added above and below conduit Comment (installed over 5) removed All dimensions removed Notes added (1-Bandit straps to be used) Poles now dashed ST5 & ST5_C Lists Pole Bolted added to ST5 Concrete pole changed to Pole Clamped on ST5_C Item (12) OG mm saddle clamp wire rope added to both lists 01/07/ Original Horizon Power issue 0 Western Power Supplied Document Title: Distribution Design Catalogue Page 15 of 15 Issue Date: 03/08/2018
DISTRIBUTION DESIGN CATALOGUE
DISTRIBUTION DESIGN CATALOGUE Section 02 PO Poles HPC-1DC-07-0002-2014 For application to Horizon Power Electricity Distribution Networks Document Control Author Name: Paul Savig Position: Senior Standards
DISTRIBUTION DESIGN CATALOGUE
DISTRIBUTION DESIGN CATALOGUE Section 16 UM Unmetered Supply HPC-1DC-07-0016-2014 For application to Horizon Power Electricity Distribution Networks Document Control Author Name: Paul Savig Position: Senior
DISTRIBUTION DESIGN CATALOGUE
DISTRIBUTION DESIGN CATALOGUE Section 12 SL Street Lighting HPC-1DC-07-0012-2014 For application to Horizon Power Electricity Distribution Networks Document Control Author Name: Paul Savig Position: Senior
Distribution Design Catalogue
Distribution Design Catalogue Running Earth and Street Light Feed Section 03 (RE) Copyright of Western Power ABN 18540492861 RE Drawings Revision List CU DATE REVISION OF REVISION Sept 2002 Dec 2005 May
Distribution Design Catalogue
Distribution Design Catalogue Running Earth and Street Light Feed Section 03 (RE) Copyright of Western Power ABN 18540492861 RE Drawings Revision List CU DATE REVISION OF REVISION Sept 2002 Original Issue
Locating Ground Mounted Equipment
Network Asset Technical Document Locating Ground Mounted Equipment Original issue: April 2008 Prepared by: Lee Chan & Robert Rogerson This revision: Original Issue Date for next review: April 2013 Copyright
Flowline Fuse Mounting and Service Termination
Part 2 Reference Drawing Register Number R1 Description Pole Bolt Details R2-1 Bonding, Intermediate R2-2 Running disc angle 11, 22 and 33 kv 3 Phase Superposition R3-1 Insulators R3-2 Insulator Ties R3-3
GENERAL INFORMATION POLE MOUNT TRANSFORMER SINGLE PHASE PAD MOUNT TRANSFORMER SINGLE PHASE POLE MOUNT TRANSFORMER THREE PHASE 17
GENERAL INFORMATION SECTION GUIDE SECTION 10 PAGE 1 DESCRIPTION SECTION NUMBER GENERAL INFORMATION... 10 POLE MOUNT TRANSFORMER SINGLE PHASE... 15 PAD MOUNT TRANSFORMER SINGLE PHASE..... 16 POLE MOUNT
EL DORADO COUNTY REGIONAL FIRE PROTECTION STANDARD
EL DORADO COUNTY REGIONAL FIRE PROTECTION STANDARD STANDARD #B-004 EFFECTIVE 06-30-2009 REVISED 7-20-2017 1. PURPOSE 1.1. During an emergency event, it is essential that emergency vehicles are provided
AC* Series Ceiling Mount Air Handlers. The last letter of the model number represents the revision level; example: AC18-00C A is AC18-00C rev. A.
REPAIR PARTS Models covered in this manual AC18-00C AC18-00C A AC18-05C AC18-05C A AC18-05C B AC18-06C AC18-06C A AC18-06C B AC18-08C AC18-08C A AC18-08C B AC24-00C AC24-00C A AC24-05C AC24-05C A AC24-05C
ECS CONNECTION OF LARGE LV SERVICES TO SECONDARY DISTRIBUTION SUBSTATIONS
Network(s): Summary: ENGINEERING CONSTRUCTION STANDARD ECS 03-0054 CONNECTION OF LARGE LV SERVICES TO SECONDARY DISTRIBUTION SUBSTATIONS EPN, LPN, SPN This standard details the procedures to be undertaken
C10 Transmission Assembly Service Parts List
Document Number C10 Transmission Assembly Service Parts List Index: Issue Date 04/20/06 Rev. Date 02/02/12 Components See Page See Page See Page CM & CS Pump Models CG & CX Pump Models CMH & CSH Pump Models
PARTS LIST FOR VIPER VIPER
P-336 P-336 PARTS LIST FOR P-336-A P-336-A ILLUSTRATION OF SUB-ASSEMBLIES 6 3 1 5 2 4 P-336-A.1 P-336-A.1 For Codes: 10597 to 10635 Do Not use this Parts List for a machine if its code number is not listed.
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide)
Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide) 13536-A Figure 1. ACE-200DS Enclosure With OCM-HD Panels Content Page INTRODUCTION... 2 1 PRODUCT DESCRIPTION...
EDS FUSE RATINGS AT DISTRIBUTION SUBSTATIONS
Document Number: EDS 05-4001 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 05-4001 FUSE RATINGS AT DISTRIBUTION SUBSTATIONS EPN, LPN, SPN This design standard details the HV and LV fuse ratings
Precision TIG 225 PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-536 RETURN TO MAIN INDEX PARTS LIST FOR Precision TIG 225 P-536 P-536-A P-536-A
PARAVION TECHNOLOGY, INC AIRWAY AVENUE FT. COLLINS, COLORADO 80524
Rev. 2, 01/31/00 PARAVION TECHNOLOGY, INC. 2001 AIRWAY AVENUE FT. COLLINS, COLORADO 80524 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS 206ER-100 ENGINE RELIGHT SYSTEM INSTALLATION BELL MODEL 206A/B AND 206L
Instructions for Continued Airworthiness
Forced Aeromotive Technologies Instructions for Continued Airworthiness Supercharged IO-550-N Engines Installed On NOTICE This document must be referenced on Block 8 of FAA form 337 and added to the aircraft
Procedure PR D Electrical Permits. Engineering Procedure Electrical Distribution Unit. Version 1.0. Date in Force: 4 November 2015
Engineering Procedure Electrical Distribution Unit PR D 78500 Electrical s Version 1.0 Date in Force: 4 November 2015 Procedure UNCONTROLLED COPY WHEN PRINTED Approved by: Sean Budge Manager Electrical
SERVICE REPORT ELECTRICAL ENGINEERING FOUNDERS HILL REMAINDER ERF 13
SERVICE REPORT ELECTRICAL ENGINEERING SERVICES FOR FOR PROPOSED ELECTRICAL REZONING ENGINEERING SERVICES FOR PROPOSED TOWNSHIPS FOUNDERS HILL REMAINDER ERF IRENE 13 EXTENSION 193 SUPPLY AUTHORITY DEVELOPER
Vehicle Technical Specifications
Vehicle Manufacturer: Year and Model: Dodge (2003-2007) Viper Competition Coupe This specifications form was developed by SCCA Pro Racing and will be used by the TECHNICAL MANAGER to establish technical
KROFTMAN CONTAINER SHELTER TC812
KROFTMAN CONTAINER SHELTER CONTENT FRAME P82-FR 82-0 82-02 82-03 82-0 82-05 82-06 82-07 parts list frame part numbers main frame base plan, frame plan available hight inside detail 0 detail 02, 03 Roof
FLAGPOLE TRUCKS & ACCESSORIES
ST-1 SERIES Cast aluminum construction with a 1 outside diameter nylon pulley on a 3/16 stainless 20NC stainless steel set screw. The top is designed to accept an ornament with a spindle screw. Maximum
Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan Ford Customer Service Division
Michael A. Berardi Ford Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford Customer Service Division TO: All U.S. Ford and Lincoln Dealers March 16, 2015
PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
Company Directive STANDARD TECHNIQUE : TP4B/2. Relating to 11kV and 6.6kV Transformer Protection
Company Directive STANDARD TECHNIQUE : TP4B/2 Relating to 11kV and 6.6kV Protection Policy Summary This document describes the detailed requirements for 11kV/415V and 6.6kV/415V distribution transformer
UNITED STATES OF AMERICA BEFORE THE FEDERAL ENERGY REGULATORY COMMISSION
UNITED STATES OF AMERICA BEFORE THE FEDERAL ENERGY REGULATORY COMMISSION WESTERN ELECTRICITY ) Docket Nos. RM09-9-000 COORDINATING COUNCIL ) RM09-14-000 ) COMPLIANCE FILING OF THE WESTERN ELECTRICITY COORDINATING
DISTRIBUTOR PRODUCT RECALL NOTICE 3M Model SWSW Series Mobile SkyWalk Horizontal Lifeline Systems and Components
3M Personal Safety Division 3M Center, Building 235-02-W-70 St. Paul, MN 55144-1000 651 733 1110 DISTRIBUTOR PRODUCT RECALL NOTICE 3M Model SWSW Series Mobile SkyWalk Horizontal Lifeline Systems and Components
Airworthiness Directive
Airworthiness Directive AD No.: 2016-0142R1 Issued: 12 April 2018 EASA AD No.: 2016-0142R1 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008
Water Specialist EE Control Valve Programming and Cover Drawing Manual
Water Specialist EE Control Valve Programming and Cover Drawing Manual Page 2 EE Man u al EE Man u al Page 3 Table of Contents EE Front Cover and Drive Assembly... 4 Regeneration and Error Screens, Button
Plan Check Policies and Guidelines
VIII. TRAFFIC SIGNING AND STRIPING PLANS A. INTRODUCTION Traffic signing and striping plans are required for all General Plan Roads and any roadway that is 56-foot wide curb-to-curb (78 R/W) or wider.
Start-up and Operation
Start-up and Operation NEVER FORGET THAT ANY MACHINE CAN BE VERY DANGEROUS WHEN NOT OPERATED CORRECTLY AND SAFELY. ALWAYS VISUALLY CHECK TO MAKE SURE THAT ALL PERSONS ARE CLEAR BEFORE TURNING ON ANY CONTROLS.
EDS ELECTRIC VEHICLE CONNECTIONS
Document Number: EDS 08-5050 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 08-5050 ELECTRIC VEHICLE CONNECTIONS EPN, LPN, SPN This standard outlines the design requirements for the connection of
Gen 1 CNG Frame Mount FSM Parts Manual
Gen 1 CNG Frame Mount FSM Parts Manual Printed September 2, 2015 Rev D Preface FSM Parts Manual To reduce the chance of personal injury and/or property damage, the following instructions must be carefully
FHP MANUFACTURING PARTS PRICE LIST
FHP MANUFACTURING PARTS PRICE LIST All models in this price sheet reflect our current vintage. For discontinued models please contact the factory. To ensure you receive the correct part please have the
Guideline for Parallel Grid Exit Point Connection 28/10/2010
Guideline for Parallel Grid Exit Point Connection 28/10/2010 Guideline for Parallel Grid Exit Point Connection Page 2 of 11 TABLE OF CONTENTS 1 PURPOSE... 3 1.1 Pupose of the document... 3 2 BACKGROUND
U.S. Census Bureau News Joint Release U.S. Department of Housing and Urban Development
Raemeka Mayo or Stephen Cooper Economic Indicators Division (01) 76-5160 FOR IMMEDIATE RELEASE TUESDAY, MARCH 17, 015 AT 8:0 A.M. EDT NEW RESIDENTIAL CONSTRUCTION IN FEBRUARY 015 The U.S. Census Bureau
SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED
SAFETY DIRECTIVE Title: Ladders Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This procedure has
ADDENDUM No. 1 Prospective Bidders
Page 1 of 1 Attachment to Addendum # 1 Revised Itemized Bid ADDENDUM No. 1 TO: Prospective Bidders FROM: Gregory Tate, Construction Contracts Administrator DATE: January 24, 2019 PROJECT: Traffic Signal
CNG Frame Mount FSM Parts Manual
CNG Frame Mount FSM Parts Manual Printed December 16, 2016 Rev C Preface Proper installation, service, and repair are important to the safety of the service technician and the safe, reliable operation
Faster. Count on availability when you need it most H1B Bent Axis Motors Rapid Delivery Center. time to market. powersolutions.danfoss.
Count on availability when you need it most H1B Bent Axis Motors Rapid Delivery Center Faster time to market Danfoss RDCs ensure you have the product you want, when you want it powersolutions.danfoss.com
Parts Manual EM and EMTC 2500 lb. and 3300 lb. Capacity Flipaway Liftgates
www.waltco.com Phone: 800.4.5685 parts@waltco.com Fax: 800.4.5684 Parts Manual EM and EMTC 2500 lb. and 3300 lb. Capacity Flipaway Liftgates This manual identifies parts for Liftgates manufactured: /200
MINUTE MISER. Service Parts Manual ELECTRIC THREE WHEELED VEHICLE
MINUTE MISER ELECTRIC THREE WHEELED VEHICLE 630940 ISSUED: JANUARY 2013 REVISED: OCTOBER 2013 SERVICE PARTS MANUAL ELECTRIC POWERED THREE WHEEL SERVICE VEHICLE MINUTE MISER STARTING MODEL YEAR 2013 DISCLAIMER:
PARTS MANUAL. ECN-M0XXX Rev. 2.0, Date Part #
ILM plus,0,,0 PARTS MANUAL ECN-M0XXX Rev..0, Date 0--0 Part #90-07-000 99 Piuma Ave., Cerritos, CA 9070 Tel (888)-77-8 Fax ()-9-88 7 Whitehead Road, Trenton, NJ 089 Tel (09)-87-00 Fax (09)-87-0 Visit our
Control, Safe Use and Operation of Road-Rail Plant
Control, Safe Use and Operation of Page 1 of 13 Part A Synopsis A Standard detailing the requirements for the control, safe use and operation of road-rail plant in the railway environment. Approval and
Switch Disconnectors. SENTRON 3NP5 Fuse Switch Disconnectors up to 630 A. Introduction. 7/106 Siemens LV
Switch Disconnectors Introduction Siemens AG 2010 Overview 3NP5 0 3NP5 2 3NP5 fuse disconnector range 3NP5 4 SENTRON 3NP5 fuse disconnectors are controls for the occasional manual ing/isolating of loads
Water Specialist EI Control Valve Programming and Cover Drawing Manual
Water Specialist EI Control Valve Programming and Cover Drawing Manual Page 2 EI Man u al EI Man u al Page 3 Table of Contents EI Front Cover and Drive Assembly... 4 Regeneration and Error Screens... 5
AN RPM to TACH Counts Conversion. 1 Preface. 2 Audience. 3 Overview. 4 References
AN 17.4 RPM to TACH Counts Conversion 1 Preface 2 Audience 3 Overview 4 References This application note provides look up tables for the calculation of RPM to TACH Counts for use with the EMC2103, EMC2104,
Certificate of Compliance
Certificate of Compliance Certificate: 70054084 Issued to: Emerson - Rosemount, Micro Motion Inc. 12001 Technology Dr. Eden Prairie, Minnesota 55344 USA Attention: Paul Schilke The products listed below
Guidance for Low Voltage Electrical Installations
Guidance for Low Voltage Electrical Synopsis This document provides information in support of GI/RT7007 Low Voltage Electrical. Signatures removed from electronic version Submitted by Anne E Blakeney Standards
Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan Ford Customer Service Division
Michael A. Berardi Ford Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford Customer Service Division TO: All U.S. Ford and Lincoln Dealers August 26, 2014
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL: contact@jamisondoor.com ECN
Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel
Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel DARAC LTD are a leading industrial supplier of architectural & rigging items under the brand name STEELGEAR. We stock a vast range
U.S. Census Bureau News Joint Release U.S. Department of Housing and Urban Development
Raemeka Mayo or Stephen Cooper Economic Indicators Division (01) 76-5160 FOR IMMEDIATE RELEASE FRIDAY, JUNE 17, 016 AT 8:0 A.M. EDT NEW RESIDENTIAL CONSTRUCTION IN MAY 016 The U.S. Census Bureau and the
Australian/New Zealand Standard
AS/NZS 3696.19:2009 AS/NZS 3696.19:2009 Australian/New Zealand Standard Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) AS/NZS 3696.19:2009 This
U.S. Census Bureau News Joint Release U.S. Department of Housing and Urban Development
Raemeka Mayo or Stephen Cooper Economic Indicators Division (01) 76-5160 FOR IMMEDIATE RELEASE WEDNESDAY, MARCH 16, 016 AT 8:0 A.M. EDT NEW RESIDENTIAL CONSTRUCTION IN FEBRUARY 016 The U.S. Census Bureau
PARAVION TECHNOLOGY, INC AIRWAY AVENUE FT. COLLINS, COLORADO 80524
PARAVION TECHNOLOGY, INC. 2001 AIRWAY AVENUE FT. COLLINS, COLORADO 80524 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS DZUS SNOW DEFLECTOR INSTALLATION BELL 206L-1/L-3/L-4 AND 407 MODELS Cover Rev. 3, 12/12/05
LF-72 PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-501 RETURN TO MAIN INDEX PARTS LIST FOR P-501 P-501-A P-501-A ILLUSTRATION
Item Code Description Unit Qty Total
UNDP ELECTRICITY SECTOR NORTHERN GOVERNORATES Phase XI Item Code Description Unit Qty Total 04-02-00001 Service Pole - 6m, 75mm dia GS Pipe 11250 04-02-00002 9m Tubular Steel Poles complete with all Accessories
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET NO. 1E12
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION TYPE CERTIFICATE DATA SHEET NO. 1E12 1E12 Revision 9 Lycoming Engines IO-320 -A1A-A2A-B1A, -B1B, B1C, -B1E, -B1D, -B2A, -C1A, -C1B, -D1A, -D1C,
Field Manual. Docket T5.32 AAR Field and Office Manual Changes Field Manual
Docket T5.32 AAR Field and Office Manual Changes Field Manual The T5.32 task force recommends the following changes to the Association of American Railroads, Field and Office Manuals of the AAR Interchange
Kit Drain Water Tempering Kit
Kit 90092 - Drain Water Tempering Kit for Models DH2000 and MD2000 Kit Parts: Refer to the parts list below to ensure all the parts necessary for the installation are in your kit. Item Part Description
Classic Instruments. Ultimate Speedometer & Speed-Tachular. Installation Manual
Classic Instruments Ultimate Speedometer & Speed-Tachular Installation Manual Table of Contents Welcome from the Team at Classic Instruments!... 3 Gauge Wiring... 4 Ultimate Speedometer Wiring Diagram...
CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO
CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC ML-136043 208/240 V. 8.5kW ML-136045 480 V. 8.5kW 3-PAN PRO ML-136037 208/240 V. 9.25kW ML-136044 480 V. 9.25kW ML-152030 3-PAN LWE 5-PAN BASIC
PARTS LIST CHAIN SAW G2000T
848C0593B0 (007) PARTS LIST CHAIN SAW G2000T NOTE : 1. Use genuine parts specified in the parts list for repair and/or replacement. 2. Does not warrant the machines, those which have been damaged by the
SERVICE INSTRUCTION. ISSUED REVISED PAGE NO. REVISION MO DAY YEAR MO DAY YEAR 1 of 8 BB
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
P68 SERIES SERVICE INSTRUCTION
vulcanair spa via g. pascoli, 7 80026 casoria (na) italia Tel +39 081 5918111 Fax +39 081 5918172 info@vulcanair.com www.vulcanair.com P68 SERIES SERVICE INSTRUCTION No. 61 Rev. 1 SUBJECT: NEW EGT INDICATOR
SAN JOAQUIN VALLEY UNIFIED AIR POLLUTION CONTROL DISTRICT DRAFT STAFF REPORT
DRAFT STAFF REPORT Draft Amendments to Rule 4621 (Gasoline Transfer into Stationary Storage Containers, Delivery Vessels, and Bulk Plants) and Rule 4622 (Gasoline Transfer into Motor Vehicle Fuel Tanks)
Division Project No. 10L2G
LINCOLN HILLS SCHOOL HVAC STUDY DEPARTMENT OF CORRECTIONS MERRILL, WISCONSIN Division Project No. 10L2G April 29, 2011 By RAASCH ASSOCIATES, INC. 400 AMS COURT GREEN BAY, WISCONSIN 54313 920-434-2128 Page
2.3.2 Hydrant Maintenance
2.3.2 Hydrant Maintenance YOUR ORGANIZATION STANDARD OPERATING PROCEDURES/GUIDELINES TITLE: Hydrant Maintenance NUMBER: 2.3.2 PREPARED BY: SECTION/TOPIC: Special Programs ISSUE DATE: REVISED DATE: APPROVED
ROPE THIMBLE P/N STP-40-SS P/N STP-50-SS PULL WIRE SHOULD BE STRAIGHT AND CLEAR OF OBSTRUCTIONS WIRE SUPPORT P/N STG-200, STG-200-SS
1 P/N: PS-P INSTALLATION & SETTING INSTRUCTIONS YELLOW INDICATION FLAG: P/N STP-F The Indication Flag should be fitted when there is more than one switch used on the conveyor as noted in AS1755-2000 Clause
Parts Manual HLF 2500, 3000, 4000 & 5000 lb. Capacity Flipaway Liftgates
www.waltco.com Phone: 800.4.5685 parts@waltco.com Fax: 800.4.5684 Parts Manual HLF 500, 3000, 4000 & 5000 lb. Capacity Flipaway Liftgates EO:7 Rev 7 This manual identifies parts for Liftgates manufactured:
Catalogue: Cable Haul
Catalogue: Cable Haul EXCESS POWER EQUIPMENT & ELECTRO POWER EQUIPMENT 27-29 Mandarin Rd., MADDINGTON WA 6109 PH: (61 8) 9493 3077 FAX: (61 8) 9493 2336 Email: info@epe.com.au Index A. Cable Haul B. Hydraulic
1VAL2401-SG Rev D. Spare parts list for Outdoor Products Reclosers, breakers, & padmount switches
1VAL2401-SG Rev D Spare parts list for Outdoor Products Reclosers, breakers, & padmount switches Reclosers GridShield recloser 12A00736H05 Actuator assist capacitor Single-phase upgrade 15 KV, 800 A, 12.5
PARTS LIST FOR RED-D-ARC DC-400 DC-400
P-355 P-355 PARTS LIST FOR RED-D-ARC P-355-A P-355-A ILLUSTRATION OF SUB-ASSEMBLIES 7 6 2 3 4 1 5 3-12-2001 P-355-A.1 P-355-A.1 RED-D-ARC For Codes: 9850MSST to 11128 Do Not use this Parts List for a machine
U.S. Census Bureau News Joint Release U.S. Department of Housing and Urban Development
Raemeka Mayo or Stephen Cooper Economic Indicators Division (301) 763-5160 FOR IMMEDIATE RELEASE TUESDAY, MAY 17, 2016 AT 8:30 A.M. EDT NEW RESIDENTIAL CONSTRUCTION IN APRIL 2016 The U.S. Census Bureau
TOOLING STANDARDS AND MACHINE SPECIFICATIONS DOCUMENT #END 001 REVISION LEVEL: A9
1 P.O. Box 447 160 E Pond, Romeo, MI. 48065 Phone (586) 752-4527 Fax (586) 752-0896 TOOLING STANDARDS AND MACHINE SPECIFICATIONS DOCUMENT #END 001 REVISION LEVEL: A9 DISTRIBUTION LIST OF TOOLING STANDARDS
Multi-Pak Group Control
Multi-Pak Grouping.1 Product....................................... Application.................................... Features Enclosures........................................... V-T-2 V-T-2 V-T-2 Feeder
CITY OF ELKO, NEVADA REQUIREMENTS, SPECIFICATIONS AND CONTRACT DOCUMENTS TO FURNISH
CITY OF ELKO, NEVADA REQUIREMENTS, SPECIFICATIONS AND CONTRACT DOCUMENTS TO FURNISH July 2016 CITY OF ELKO FACILITIES DEPARTMENT SET NO.. TABLE OF CONTENTS Invitation to Bid... 1 Bidding Information...
ILLUSTRATED PARTS CATALOG STC SR01616SE
ILLUSTRATED PARTS CATALOG STC SR066SE ENGINE INLET BARRIER FILTER SYSTEM Sikorsky S-76A+/A++/C/C+ This document provides information to assist with the identification of parts and assemblies for the 076T-
OPERATION AND MAINTENANCE MANUAL WASP, Inc. United Airlines Shock Mount Cargo Cart Model No. A03439D
OPERATION AND MAINTENANCE MANUAL WASP, Inc. United Airlines Shock Mount Cargo Cart Model No. A03439D WASP RECORD OF REVISIONS REV. ISSUE DATE BY REV. ISSUE DATE BY NO. DATE INSERTED NO. DATE INSERTED Original
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL 12K 2 POST S212SX 1-1-R/B/M (SYMMETRICAL) READ THIS INSTRUCTION MANUAL THOROUGHLY BEFORE INSTALLING, OPERATING, SERVICING OR MAINTAINING THE LIFT. SAVE THIS MANUAL. OCT
Bulletin 109 IEC Non-Reversing Starters. Product Overview/Product Selection. Table of Contents
Bulletin IEC Non-Reversing Starters Product Overview/Product Selection Cat. No. -CABAF--R-P IP (Type ) Metal Enclosure with Lift-off Cover Bulletin IEC Non-Reversing Starters Impact-resistant molded enclosures
FHP MANUFACTURING PARTS PRICE LIST
FHP MANUFACTURING PARTS PRICE LIST All models in this price sheet reflect our current vintage. For discontinued models please contact the factory. To ensure you receive the correct part please have the
Municipality Generator Interconnection Application Single Meter Application Part I
Municipality Generator Interconnection Application Single Meter Application Part I New Application Revised Application A single customer interconnecting to a single meter at a single premise makes a new
HAULMAAX 400/460 Rear Suspension
Rear Suspension LIT NO: SP-171 DATE: July 2015 REVISION: I CONTENTS DESCRIPTION PAGE HMX 400/460... 2 Inboard Frame Bracket.... 4 Outboard Frame Bracket.... 5 DESCRIPTION PAGE Aftermarket Service Kits...
Lever. Min-Max. Part# C /16-3/8 7-1, Standard. D3 DF71 5/16-3/8 7-1, Standard. C /8-1/2 A-1, Standard
Rev. 10-30-2002 Cargo Control Load Binders Ratchet Type L-140 Ratchet Part# Proof 1/8 CB 0140233 3/16 CB 0140323 Blu Krome Hi-Test 1/4 CB 0140423 CB 0181423 Lever Part# Anchor 1 Min-Max Type C7 1048128
SERVICE LETTER. Figure 1 Form 2629
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 (U.S. and Canada) Telephone +1 (570) 323-6181 (International) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
Model 8141-A 8141-B 8141-D. Self-Aspirated Radiation Shield. User s Manual 1165 NATIONAL DRIVE SACRAMENTO, CALIFORNIA WWW. ALLWEATHERINC.
Model 8141-A 8141-B 8141-D Self-Aspirated User s Manual 1165 NATIONAL DRIVE SACRAMENTO, CALIFORNIA 95834 WWW. ALLWEATHERINC. COM Self-Aspirated 8141 TABLE OF CONTENTS INTRODUCTION... 1 THEORY OF OPERATION...
M/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
MONTHLY NEW RESIDENTIAL SALES, APRIL 2017
FOR RELEASE AT 10:00 AM EDT, TUESDAY, MAY 23, MONTHLY NEW RESIDENTIAL SALES, APRIL Release Number: CB17-80 May 23, - The U.S. Census Bureau and the U.S. Department of Housing and Urban Development jointly
SYSTEM MANUAL. Automated Motorized Hydraulic Traffic Controller. Revision CS72-HTC
CS72-HTC SYSTEM MANUAL Automated Motorized Hydraulic Traffic Controller Revision 2002.01 Spike Systems 3623 S. Seventh Street Phoenix, Arizona 85040 Phone: (602) 243-0291 Fax: (602) 243-0294 Hydraulic
BAKERSFIELD, CALIFORNIA HARLEY OWNERS GROUP
BAKERSFIELD, CALIFORNIA HARLEY OWNERS GROUP CHAPTER 1580 ROAD CAPTAIN HAND BOOK UPDATED 2/25/2009 DIRECTOR: DAVE FISHER NEVER FORGET OUR HOG MOTTO: RIDE AND HAVE FUN!!! Preface Road Captains are discretionary
AGlobal SupplierofAutomotiveDieComponents
AGlobal SupplierofAutomotiveDieComponents Jolico/J-B Tool, Inc. CHRYSLER INDEX DESCRIPTION PAGE DESCRIPTION PAGE ARM ARM, ROTARY FLIPPER CI-3 COMPENSATOR COMPENSATOR, STOCK GUIDE CB-1 BASE BASES, TRUNNION
County of Los Angeles Department of Public Works Construction Division BID SUMMARY (sorted by Unit Price Total)
County of Los Angeles Department of Public Works Construction Division BID SUMMARY (sorted by Unit Price Total) 1 CONSTRUCTION SCHEDULE 1 $2,000.00 LS $2,000.00 $2,000.00 $2,000.00 $2,000.00 $2,000.00
THE AquaBlast & RocketRide FUNSLIDES
THE AquaBlast & RocketRide FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH AquaBlast TM & RocketRide TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL
E/ECE/324/Rev.1/Add.77/Rev.1/Amend.3 E/ECE/TRANS/505/Rev.1/Add.77/Rev.1/Amend.3
22 February 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
BACS APPROVED BUREAU SCHEME SUPPORT GUIDELINES
BACS APPROVED BUREAU SCHEME SUPPORT GUIDELINES VERSION 8.2 May 2017 CONTENTS 1 DOCUMENT INFORMATION 4 1.1 VERSION HISTORY 4 1.2 DOCUMENT REVIEWERS 4 1.3 COPYRIGHT STATEMENT 4 2 CONFIDENTIALITY 4 3 INTRODUCTION
MONTHLY NEW RESIDENTIAL SALES, SEPTEMBER 2018
FOR RELEASE AT 10:00 AM EDT, WEDNESDAY, OCTOBER 24, MONTHLY NEW RESIDENTIAL SALES, SEPTEMBER Release Number: CB18 160 October 24, The U.S. Census Bureau and the U.S. Department of Housing and Urban Development
Installation Manual. Rev
Installation Manual ChargePro 620 Charging Station is a trademark of SemaConnect, Inc. All other products or services mentioned are the trademarks, service marks, registered trademarks or registered service