NUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
|
|
- Randell Moore
- 6 years ago
- Views:
Transcription
1 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig Washers C-Washers Captive C-Washers & STUDS Spherical Seating Washers High Tensile Studs Springs Threaded Bar Socket Capscrews Countersunk Socket Screws Dome Head Socket Screws Socket Set Screws Carbide Grippers Heavy Duty Thread Repair Equipment Swivel Clamping Pads Socket Shoulder Screws Wire Thread Repair Kits Steel Zinc Plated Cast Iron Stainless Steel Chemical Blacked Finished Steel sales@wdsltd.co.uk 8-a
2 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 775 Zinc Plated Full Nut Zinc Plated Steel ZP Related Products: Washers see Page 8-8 D S B M M4-ZP M M5-ZP M M6-ZP M M8-ZP M M10-ZP D S B M M12-ZP M M14-ZP M M16-ZP M M18-ZP M M20-ZP Stainless Steel Full Nut 303 Grade Stainless Steel (A2) 303 Related Products: Washers see Page 8-9 D S B M M4-303 M M5-303 M M6-303 M M8-303 M M D S B M M M M M M M M M M Stainless Steel Full Nut 316 Grade Stainless Steel (A4) 303 Related Products: Washers see Page 8-9 D S B M M4-316 M M5-316 M M6-316 M M8-316 M M M M M M M M M M M M sales@wdsltd.co.uk
3 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 404 Collar Nut High Tensile Steel BS.970.Gr.606M36T See 805 Series for this part in Stainless Steel Related Products: Studs see Pages 8-19 to 8-23 D D1 H H1 S M M M M M M M M M M M M M Inch D D1 H H1 B A BSF BSW S UNC (g) BA BSF BSW UNC 2BA " UNC " " 0.437" " 0.500" " 0.562" " 0.750" " 0.937" " 1.125" " " 1.500" sales@wdsltd.co.uk 8-2
4 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 805 Collar Nut Stainless Steel BS 970 Gr 316S See 404 Series for this part in Steel Related Products: Studs see Page 8-21 D D1 H H1 S M M M M M M Collar Nut Stainless Steel BS 970 Gr 303S See 404 Series for this part in Steel Related Products: Studs see Page 8-22 D D1 H H1 S M M M M M M sales@wdsltd.co.uk
5 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 806 Spherical Seating Nut - Stainless Stainless Steel BS 970 Gr 316S See 407 Series for this part in Steel Related Products: Spherical Washer (female) see Page 8-15 D D1 H H1 R S M M M M Spherical Seating Nut High Tensile Steel BS.970.Gr.606M36T See 806 Series for this part in Stainless Steel Related Products Spherical Washer (female) see Page 8-14 Type A - with Flanged Base D D1 H H1 R S M M M M M M M M Type A - Inch (UNC) with Flanged Base D D1 H H1 R S UNC " " " sales@wdsltd.co.uk 8-4
6 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 407 Spherical Seating Nut High Tensile Steel BS.970.Gr.606M36T See 806 Series for this part in Stainless Steel Related Products Spherical Washer (female) see Page 8-15 Type B - No Flange Base D H R S M M M M M M Coupling Nut Steel BS970 Gr.230M07 See 832 Series for this part in Stainless Steel D H S D H S M M M M M M Inch D H BSW S UNC (g) BSW UNC " 0.562" " 0.750" " 0.937" " 1.125" sales@wdsltd.co.uk
7 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 832 Coupling Nut - Stainless Stainless Steel BS 970 Gr 316S11 See 635 Series for this part in Steel 316 D H S M M M Acorn Nut Steel BS.970 Gr.230M07 See 815 Series for this part in Stainless Steel Related Products: Studs see Pages 8-19 to 8-23 D H S T D H S T M M M M M M M M Inch D H BSF/BSW S UNC T BSF BSW UNC " " 0.750" " sales@wdsltd.co.uk 8-6
8 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 815/8915 Acorn Nut - Stainless Stainless Steel BS 970 Gr 316S11/303S See 617 Series for this part in Steel Related Products: Studs see Pages 8-21 to 8-22 D D1 H H1 S T Material 316S11 Material 303S31 M M M M M M M Swivel Nut High Tensile Steel BS.970.Gr.606M36T BS.970.Gr 220M07 Related Products: Studs see Pages 8-19 to 8-23 D D1 H S M M M M M M Inch D D1 H BSW S UNC (g) BSW UNC " 0.562" " 0.750" " 0.937" " 1.125" sales@wdsltd.co.uk
9 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 413 Slide On Quick Action Nut Zinc Plated HT Steel ZP Related Products: Threaded Bar see Page 8-26 M A/F A B M M M M M M Zinc Plated Form A Washers Zinc Plated Steel ZP Related Products: Nuts see Page 8-1 D D1 H M M4-ZP M M5-ZP M M6-ZP M M8-ZP M M10-ZP M M12-ZP M M14-ZP M M16-ZP M M18-ZP M M20-ZP sales@wdsltd.co.uk 8-8
10 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS Stainless Steel Form A Washers 303 Stainless Steel (A2) 303 Related Products: Nuts see Page 8-1 D D1 H M M4-303 M M5-303 M M6-303 M M8-303 M M M M M M M M M M M M Stainless Steel Form A Washers 316 Grade Stainless Steel (A4) 316 Related Products: Nuts see Page 8-1 D D1 H M M4-316 M M5-316 M M6-316 M M8-316 M M M M M M M M M M M M sales@wdsltd.co.uk
11 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 400 Jig Washer Steel, BS.970 Gr.230M07 Surface hardened D = Stud Size See 802 Series for this part in Stainless Steel Related Products: Studs see Pagea 8-19 to 8-23 D Inch D1 D2 H M M5 2BA M M M M M M M M M M Plain Washer - Stainless Stainless Steel BS 970 Gr 316S See 400 Series for this part in Steel D = Stud Size Related Products: Studs see Page 8-21 D D1 D2 H M M M M M sales@wdsltd.co.uk 8-10
12 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 8902 Plain Washer - Stainless Stainless Steel BS 970 Gr 316S See 400 Series for this part in Steel D = Stud Size Related Products: Studs see Page 8-22 D D1 D2 H M M M M M C-Washer - Stainless Stainless Steel BS 970 Gr 316S See 402 Series for this part in Steel Related Products: Studs see Page 8-21; Nuts see Page 8-3 D D1 B H M M M M D AND 3D CAD SERVICE Download 2D drawings and 3D CAD models in all popular formats (free of charge) at sales@wdsltd.co.uk
13 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 402 C-Washer Steel, BS.970 Gr. 220M07 Case hardened D = Stud Size See 804 Series for this part in Stainless Steel Related Products: Studs see Pages 8-19 to 8-23; Nuts see Page 8-2 D Inch D1 H D Inch D1 H M M5 2BA M M M M M M M M M M M M M M M M M M M M Captive C-Washer Steel, BS.970 Gr.070M20 Case hardened Related Products: Studs see Pages 8-19 to 8-23; Nuts see Page 8-2; Shoulder Screws see Page 8-37 Inch D A D1 H R R1 D A D1 H R R1 M M M M M M M " " " " " " " sales@wdsltd.co.uk 8-12
14 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 401 Spherical Seating Washer Male Steel, BS.970 Gr.230M07 Surface hardened See 803 Series for this part in Stainless Steel Related Products: Female Spherical Washer see Page 8-14 Male Washer D Inch D1 D2 H H1 R M4 2BA M M M M M M M M M M M M M M M M M M M M M M M M M M M M M On - a - roll with CASTORS To see the full range of Castors request your free copy of this Castors Leaflet at or to view our Castors online go to sales@wdsltd.co.uk
15 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 401 Spherical Seating Washer Female Steel, BS.970 Gr.230M07 Surface hardened See 803 Series for this part in Stainless Steel Related Products: Male Spherical Washer see Page 8-13 Female Washer D Inch D1 D2 H2 H3 R M4 2BA F M F M F M F M F M F M F M F M F M F M F M F M F M F M F BUY ONLINE TECHNICAL INFO & DATA TABLES SPECIAL OFFERS FREE 2D & 3D CAD DOWNLOADS Your favourite products all in one place sales@wdsltd.co.uk 8-14
16 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 803/8903 Spherical Seating Washer Male - Stainless Stainless Steel BS 970 Gr 316S11/303S See 401 Series for this part in Steel D = Stud Size Related Products: Studs see Pages 8-21 to 8-22; Nuts see Page 8-3 Male Washer D D1 D2 H H1 R Material 316S11 Material 303S31 M M M M M M M M M M M M M M M 803/8903 Spherical Seating Washer Female - Stainless Stainless Steel BS 970 Gr 316S11/303S See 401 Series for this part in Steel Related Products: Studs see Pages 8-21 to 8-22; Nuts see Page 8-3 D = Stud Size Female Washer D D1 D2 H2 H3 R Material 316S11 Material 303S31 M F F M F F M F F M F F M F F sales@wdsltd.co.uk
17 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 110 Ball Knob Handle Steel BS.970 Gr.230M07 Related Products: Handknob see Section 11; Ball Knobs see Section 11 D Inch L L1 L2 (g) BSW M M M M Hand Screw Hand knob - Cast iron BS.1452 Gr.250 Screw - Steel BS.970 Gr.230M07 CI Related Products: Swivel Pads see Section to D L D1 D2 H D L D1 D2 H M M M M M M M M M M Inch D L D1 D2 H UNC sales@wdsltd.co.uk 8-16
18 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 616 Latch Screw Steel BS.970 Gr.212A42 D D1 E H L M M M Stud - High tensile steel BS.970 Gr.606M36T *BS M40 Class of fit 4H 8G See 801 Series for this part in Stainless Steel Related Products: Nuts see Page 8-1 to 8-2; Washers see Page 8-8 D L L1 L2 D L L1 L2 M4* M4* M4* M4* M4* M5* M5* M5* M5* M5* M6* M6* M6* M6* M6* M6* M6* M6* M6* M6* M6* M6* M6* M M M M M M M M M M M sales@wdsltd.co.uk
19 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 405 Stud - High tensile steel BS.970 Gr.606M36T *BS M40 Class of fit 4H 8G See 801 Series for this part in Stainless Steel Related Products: Nuts see Page 8-1 to 8-2; Washers see Page 8-8 D L L1 L2 D L L1 L2 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M sales@wdsltd.co.uk 8-18
20 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 405 Stud - Imperial High Tensile Steel BS.970. Gr.606M36T *BS M40 Class of fit 4H 8G Related Products: Nuts see Page 8-2 Inch D L L1 L2 (g) BA/BSF BSW UNC 2 BA* BA* BA* UNC* UNC* UNC* * * * * * * * * sales@wdsltd.co.uk
21 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 405 Stud - Imperial High Tensile Steel BS.970. Gr.606M36T Class of fit 4H 8G Related Products: Nuts see Page 8-2 Inch D L L1 L2 (g) BA/BSF BSW UNC / sales@wdsltd.co.uk 8-20
22 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 801 Stud - Stainless Steel Stainless Steel BS 970 Gr. 316S11 Class of fit 4H 8G 316 See 405 Series for this part in Steel Related Products: Nuts see Page 8-3; Washers see Page 8-8 D L L1 L2 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M sales@wdsltd.co.uk
23 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 8901 Stud - Stainless Steel Stainless Steel BS 970 Gr. 303S31 Class of fit 4H 8G 303 See 405 Series for this part in Steel Related Products: Nuts see Page 8-3; Washers see Page 8-8 D L L1 L2 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M sales@wdsltd.co.uk 8-22
24 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 409 Stud Rolled Thread High tensile steel M6-M12 Tempered to class 10.9 M14-M30 Tempered to class 8.8 Thread Tolerance Class 6g Both Ends Related Products: Nuts see Pages 8-1 to 8-2; Washers see Page 8-8 D L L1 L2 D L L1 L2 M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M sales@wdsltd.co.uk
25 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 660 Spring Spring Steel BS 5216 B Range 3 D Inch D1 L P M M M M M M M M M M M Spring - Stainless Stainless Steel. BS 970 Gr 316S D D1 L P M M M M sales@wdsltd.co.uk 8-24
26 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 105 Screw Steel. BS.970 Gr.230M07 See 831 Series for this part in Stainless Steel D L D L M M M M M M M M M M M M M M M M M M Inch D L BSF BSW UNC Screw - Stainless Steel Stainless Steel Bs 970 Gr 316S See 105 Series for this part in Steel D L D L M M M M M M M M M M M M M M M sales@wdsltd.co.uk
27 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 416 Threaded Bar Grade 4.6 Mild Steel D L (kg) D L (kg) M M M M M M Threaded Bar Grade 8.8 High tensile steel See 839 Series for this part in Stainless Steel D L (kg) D L (kg) M M M M M M Threaded Bar Grade A4 Stainless steel BS 970 Gr 316S11 See 416 Series for Steel Range 316 D L (kg) D L (kg) M M M M M M M Threaded Bar Grade A2 Stainless steel BS 970 Gr 303S31 See 416 Series for Steel Range 303 D L (kg) D L (kg) M M M M M M sales@wdsltd.co.uk 8-26
28 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 420 Socket Capscrews Class: 12.9 Steel Thread (D) x Length (L) Pack Quantity M4 x M4-6 M4 x M4-10 M4 x M4-12 M4 x M4-16 M4 x M4-20 M4 x M4-25 M4 x M4-30 M5 x M5-8 M5 x M5-10 M5 x M5-12 M5 x M5-16 M5 x M5-20 M5 x M5-25 M5 x M5-30 M5 x M5-40 M6 x M6-10 M6 x M6-12 M6 x M6-16 M6 x M6-20 M6 x M6-25 M6 x M6-30 M6 x M6-35 M6 x M6-40 M6 x M6-50 M6 x M6-60 M6 x M6-70 M8 x M8-10 M8 x M8-12 M8 x M8-16 M8 x M8-20 M8 x M8-25 M8 x M8-30 M8 x M8-35 M8 x M8-40 M8 x M8-45 M8 x M8-50 M8 x M8-60 M8 x M8-70 M8 x M8-80 M8 x M8-100 Thread (D) x Length (L) Pack Quantity M10 x M10-12 M10 x M10-16 M10 x M10-20 M10 x M10-25 M10 x M10-30 M10 x M10-35 M10 x M10-40 M10 x M10-45 M10 x M10-50 M10 x M10-60 M10 x M10-70 M10 x M10-80 M10 x M10-90 M10 x M M10 x M M10 x M M12 x M12-25 M12 x M12-30 M12 x M12-35 M12 x M12-40 M12 x M12-45 M12 x M12-50 M12 x M12-60 M12 x M12-70 M12 x M12-80 M12 x M M12 x M M12 x M M16 x M16-25 M16 x M16-30 M16 x M16-35 M16 x M16-40 M16 x M16-45 M16 x M16-50 M16 x M16-60 M16 x M16-70 M16 x M16-80 M16 x M M16 x M M16 x M sales@wdsltd.co.uk
29 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 420 Socket Capscrews Class: 12.9 Steel Imperial Thread (D) x Length (L) Pack Quantity Thread (D) x Length (L) Pack Quantity BA UNC 2 BA x B-38 2 BA x B-12 2 BA x B-34 2 BA x B-1 4 BA x B-14 4 BA x B-38 4 BA x B-12 4 BA x B UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U UNC x U-114 BSW 1 2 UNC x U UNC x U BSW x W BSW x W BSW x W BSW x W BSWx W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x 3" W-3 FOR ALL OF OUR NEW PRODUCTS VISIT sales@wdsltd.co.uk 8-28
30 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 421 Countersunk Socket Screws Class: 10.9 Steel Thread (D) x Length (L) Pack Quantity M4 x M4-8 M4 x M4-10 M4 x M4-12 M4 x M4-16 M4 x M4-20 M4 x M4-25 M5 x M5-8 M5 x M5-10 M5 x M5-12 M5 x M5-16 M5 x M5-20 M5 x M5-25 M5 x M5-30 M5 x M5-40 M6 x M6-10 M6 x M6-12 M6 x M6-16 M6 x M6-20 M6 x M6-25 M6 x M6-30 M6 x M6-40 M6 x M6-50 M8 x M8-16 M8 x M8-20 M8 x M8-25 M8 x M8-30 M8 x M8-40 M8 x M8-50 M10 x M10-20 M10 x M10-25 M10 x M10-30 M10 x M10-40 M10 x M10-50 M10 x M10-60 M12 x M12-25 M12 x M12-30 M12 x M12-40 M12 x M12-50 M12 x M12-60 M12 x M12-70 BA BSW Imperial Thread (D) x Length (L) Pack Quantity 2 BA x B-38 2 BA x B-12 2 BA x B-34 2 BA x B-1 4 BA x B BA x B BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W sales@wdsltd.co.uk
31 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 422 Socket Dome Screws Class: 10.9 Steel Thread (D) x Length (L) Pack Quantity M4 x M4-6 M4 x M4-10 M4 x M4-16 M5 x M5-8 M5 x M5-12 M5 x M5-16 M5 x M5-20 M6 x M6-10 M6 x M6-16 M6 x M6-20 Thread (D) x Length (L) Pack Quantity M6 x M6-25 M8 x M8-12 M8 x M8-16 M8 x M8-20 M8 x M8-25 M8 x M8-30 M10 x M10-20 M10 x M10-25 M10 x M sales@wdsltd.co.uk 8-30
32 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 423 Socket Set Screws Knurled Cup Point Class: 45H Steel Thread (D) x Length (L) Pack Quantity M4 x M4-5 M4 x M4-8 M4 x M4-10 M4 x M4-12 M5 x M5-6 M5 x M5-8 M5 x M5-10 M5 x M5-12 M5 x M5-16 M6 x M6-6 M6 x M6-8 M6 x M6-10 M6 x M6-12 M6 x M6-16 M6 x M6-20 M8 x M8-8 M8 x M8-12 M8 x M8-16 M8 x M8-20 M8 x M8-25 M10 x M10-10 M10 x M10-16 M10 x M10-20 M10 x M10-25 M10 x M10-30 M12 x M12-12 M12 x M12-16 M12 x M12-20 M12 x M12-25 M12 x M12-30 M16 x M16-16 M16 x M16-20 M16 x M16-25 M16 x M16-30 M16 x M16-40 BA BSW Imperial Thread (D) x Length (L) Pack Quantity 2 BA x B-14 2 BAx B-12 4 BA x B-14 6 BAx B BSW x W BSW x W BSW x W BSWx W BSW x W BSW x W BSW x W BSW x W BSW x W BSW x W sales@wdsltd.co.uk
33 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 697 Round Adjustable Carbide Tipped Gripper Body Steel Insert Carbide D D1 L H (g) Tooth Pattern M EX-FINE M EX-FINE M POINT M EX-FINE M POINT M EX-FINE M POINT M FINE M POINT M FINE M POINT M FINE M POINT M FINE Round Adjustable Hardened Steel Gripper Tool Steel hardened D L H (g) Tooth Pattern M EX-FINE M FINE M FINE M FINE M FINE sales@wdsltd.co.uk 8-32
34 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 652 Clamping Pad Steel Pad Hardened Chemical Black Finish P = Max load in kg These clamping pads are available with either a plain clamping face, or with a serrated clamping face. D D1 L S P Plain Serrated M M M M M M M M M M M M M M M M M M M M M M M M M Improve machine performance with ANTI-VIBRATION MOUNTS Available from Order yours TODAY! sales@wdsltd.co.uk
35 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 652 Clamping Screw Pad - Restricted Swivel Ball P = Max load in kg Steel, Pad Hardened Chemical Black Finish Pattern D D1 L S P Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Plain M Serrated M Serrated M Serrated M Serrated M Serrated M Serrated M Serrated M Serrated M Serrated M Serrated M Serrated M GRIPPERS Section sales@wdsltd.co.uk 8-34
36 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 652 Headed Clamping Pad - Restricted Swivel Ball Steel Pad Hardened Chemical Black Finish P = Max load in kg These clamping pads are available with either a plain clamping face, or with a serrated clamping face. Pattern D D1 D2 L L1 L2 S P Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Plain Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M Serrated Ball M sales@wdsltd.co.uk
37 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 615 Socket Shoulder Screw Class 12.9 Steel D D1 F9 D2 L L1 H S M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M sales@wdsltd.co.uk 8-36
38 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 615 Shoulder Screw - Steel BS.970 Gr. 230M07 Related Products: Captive C-Washer see Pages 8-11 to 8-12 D D1 L D2 H L1 M M M M M M M M M Shoulder Screw - Inch Steel BS.970 Gr.230M07 Inch D D1 L D2 H L1 BA/BSF UNC 2 BA 0.250" 0.188" BA 0.250" 0.250" UNC 0.250" 0.188" UNC 0.250" 0.250" " 0.250" " 0.313" " 0.375" " 0.250" " 0.313" " 0.375" " 0.500" " 0.375" " 0.500" " 0.625" " 0.750" sales@wdsltd.co.uk
39 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 615 Retaining Screw Suitable For Drill Bushes Steel BS.970 Gr.230M07 D D1 D2 L L1 H M M M M M M M M Inch D D1 D2 L L1 H BA/BSF UNC " " " " GAS STRUTS & END FITTINGS Available in Carbon Steel & Stainless Steel with DIN Standard End Fittings Call and order yours TODAY! sales@wdsltd.co.uk 8-38
40 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS FITTING INSTRUCTIONS FOR THREAD REPAIR KIT 1. Drill hole to remove damaged thread using drill bit provided. 2. Tap hole through using tap provided. 3. Screw in thread insert using insert tool provided. Start 4. Break tang off threaded insert using tool provided. Finish - flush with surface Set depth stop to support threaded insert sales@wdsltd.co.uk
41 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 417 Wire Thread Insert Mixed Kit Threaded Inserts: 204 Stainless Steel Kit Includes: M5 x 0.8 (25 of each) M6 x 1.0 (25 of each) M8 x 1.25 (25 of each) M10 x 1.5 (25 of each) M12 x 1.75 (10 of each) Drill Bit Tap Inserting Tool Punch Allen Key Related Products: Spare Inserts, Drills & Taps see Pages 8-41 to 8-42 D (Thread Size) Insert Length From M5 to M12 1.5D Wire Thread Insert Single Size Kit Threaded Inserts: 204 Stainless Steel Kit Includes: Drill Bit Tap Thread Inserts Inserting Tool Punch Allen Key Related Products: Spare Inserts, Drills & Taps see Pages 8-41 to 8-42 D (Thread Size) Insert Length Pack Quantity M3 x D M4 x D M5 x D M6 x D M8 x D M10 x D M12 x D M14 x D M16 x D sales@wdsltd.co.uk 8-40
42 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 417 Wire Thread Insert 204 Stainless Steel PLEASE NOTE: M14 x 1.25 Fine Pitch (Common Spark Plug Thread) Related Products: Drills & Taps see Page 8-42 D (Thread Size) Insert Length Pack Quantity M3 x x D M4 x x D M5 x x D M6 x x D M8 x x D M10 x x D M12 x x D M14 x x D M16 x x D M3 x x D M4 x x D M5 x x D M6 x x D M8 x x D M10 x x D M12 x x D M14 x x D M16 x x D M3 x x D M4 x x D M5 x x D M6 x x D M8 x x D M10 x x D M12 x x D M14 x x D M16 x x D sales@wdsltd.co.uk
43 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 418 Wire Thread Insert Tapping Tool PLEASE NOTE: M14 x 1.25 Fine Pitch (Common Spark Plug Thread) Tap For Threaded Insert M3 x M4 x M5 x M6 x M8 x M10 x M12 x M14 x M16 x Wire Thread Insert Drill Bit PLEASE NOTE: M14 x 1.25 Fine Pitch (Common Spark Plug Thread) Drill For Threaded Insert M3 x M4 x M5 x M6 x M8 x M10 x M12 x M14 x M16 x sales@wdsltd.co.uk 8-42
44 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 830 Thread Insert - Stainless Heavy Duty Stainless steel BS S See 415 Series for this part in Carbon Steel and for Fitting Tool Related Products: Inserting Tool see Page 8-44 D D1 L D2 D3 L1 M5 x 0.8 M8 x M6 x 1.0 M10 x M8 x 1.25 M12 x M8 x 1.0 M12 x M10 x 1.5 M14 x M10 x 1.25 M14 x M12 x 1.75 M16 x M12 x 1.25 M16 x Thread Insert Heavy Duty Carbon steel See 830 Series for this part in Stainless Steel Related Products: Inserting Tool see Page 8-44 D D1 L D2 D3 L1 M5 x 0.8 M8 x M6 x 1.0 M10 x M8 x 1.25 M12 x M8 x 1.0 M12 x M10 x 1.5 M14 x M10 x 1.25 M14 x M12 x 1.75 M16 x M12 x 1.25 M16 x sales@wdsltd.co.uk
45 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS 415 Fitting Tool Heavy Duty Steel D D1 L L1 M M M M M Thread Repair Kit Heavy Duty Related Products: Spare Inserts see Page 8-43 Description Thread Repair Kit Contains: Qty Thread Repair Kit M5 x 0.8 Threaded Insert M6 x 1.0 Threaded Insert M8 x 1.25 Threaded Insert M8 x 1.0 Threaded Insert M10 x 1.5 Threaded Insert M10 x 1.25 Threaded Insert M12 x 1.5 Threaded Insert M16 x 1.5 Threaded Insert sales@wdsltd.co.uk 8-44
46 SECTION 8 - NUTS, WASHERS, SCREWS & STUDS THREAD MEASURING PARALLELS The thread measuring parallels represent what is probably the simplest and most flexible method of checking the EFFECTIVE DIAMETER of external screw threads. They are manufactured to the highest degree of accuracy and to a specification certified by the National Physical Laboratory. Each pair covers a range of pitches irrespective of diameter or direction of thread. For More Information Please See Pages to sales@wdsltd.co.uk
CASTORS & WHEELS WDS SECTION 20 - CASTORS & WHEELS. Levelling Castors. Furniture Castors. Stainless Steel & Zinc Plated Brackets.
CASTORS & WHEELS Furniture Castors Nylon Castors Rubber Castors High Temperature Phenlic Resin Castors Stainless Steel & Zinc Plated Brackets Heavy Duty Castors Light Duty Castors Levelling Castors Individual
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationSOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
More informationANTI-VIBRATION MOUNTS
SECTION 21 - ANTI-VIBRATION MOUNTS ANTI-VIBRATION MOUNTS Male/Male Thread Anti-Vibration Mount... 21-1 Male/Female Thread Anti-Vibration Mount... 21-2 Female/Female Thread Anti-Vibration Mount... 21-3
More informationPRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
More informationCUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
More informationSELWOOD SELTORQUE S150
SELWOOD SELTORQUE S150 With solids handling capabilities of up to 100mm and indefinite dry running ability, the Selwood Seltorque range of vortex pumps form the foundation upon which the company s international
More informationIllston & Robson Limited
Directions From M6/A38M Leave A38M at the middle ring road. At the 4th roundabout go left up the old Coventry Road towards the Blues Ground. Take the 2nd right onto Arthur Street. Turn left and then right
More informationINDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
More informationNUTS Melbourne Rectangular Stadium Project Konnect supplied a range of fasteners to this project
90 TILT-UP AND PRECAST PRODUCTS Inserts, Connectors, Anchors, Lift, Brace and Chemical Systems As a single-source provider for the Tilt-Up and Precast markets, Konnect by Dayton Superior offers professionally
More informationMetrics
Metrics www. E-Mail: orders@ 1-800-782-6342 8530 K Street Omaha, NE 68127 Phone: (402) 592-4988 Fax: (402) 592-9271 905 East Kansas Ave. Arkansas City, KS 67005 Phone: (620) 442-7526 Fax: (620) 442-7583
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 07 995 ECN 077 Parts Catalog SA S-Series Slicer Standard Automatic Frozen Option Model: SA 05/08/07 Rev. H IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationHARRISON SILVERDALE LTD
FASTENERS FOR SHEET METAL Harrison Silverdale Harrison Silverdale has been supplying Industrial Fasteners since 1982. Over the years we have gained an enviable reputation for quality and reliability serving
More informationHAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationIntroduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
More informationSAF-T-LINER MVP-ER PARTS MANUAL. Doors Section. Page 4-1. Doors 10/96
Doors Section Doors Page 4-1 Stepwell - Outward Opening Page 4-2 Doors Stepwell - Outward Opening Item Part Num. Number Qty. Description Notes 1 47001449 1 Trim - Step, Entrance, Diamond Plate 2 47001450
More information6. Parts & Assembly Table of contents
6. Parts & Assembly Table of contents General Assembly... 28 3m Complete Assembly... 28 3.5m Complete Assembly 30 4m Complete Assembly... 32 5m Complete Assembly... 34 Drawbar Assembly... 36 Lift axle
More informationParts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
More informationSTAINLESS STEEL PARTS - GENERAL STOCK LIST
STAINLESS STEEL PARTS - GENERAL STOCK LIST MOLNAR PRECISION LTD. PO BOX 1208, PRESTON, LANCASHIRE, PR2 0HG, ENGLAND PHONE 01772 700700 FAX 01772 705075 Web Site: www.manx.co.uk Email: sales@manx.co.uk
More informationINSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS WHEEL-TO- WHEEL APPLICATION: 2009-2017 Dodge Ram 1500 Crew Cab 5.5 Bed 2009-2017 Dodge Ram 1500 Quad Cab 6.5 Bed PART NUMBER: 21-534310, 21-534315 ITEM QUANTITY
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 07 99508 ECN 06 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA //07 Rev. L IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationParts Catalog. S-Series Slicer Automatic. Model:
, 07 99509 ECN 077 Parts Catalog S-Series Slicer Automatic Model: SGA SGA 05/08/07 Rev. J IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationATLAS TRANSFER CASES CABLE SHIFTER units built after 5/1/12
KIT CONSISTS OF: No. Qty Part No. Description P.O. Box 247, 4320 Aerotech Center Way PAGE 1 OF 6 Page Rev. Date: 08-01-17 1 1 302051 BASE- TWIN STICK MOUNT 2 1 302060 BOOT- TWIN STICK 3 1 302063 BOOT RING-
More informationServicing the Tool. Service Kit SERVICE KIT. For all servicing we recommend the use of the service kit (part number (S)).
Servicing the Tool Service Kit For all servicing we recommend the use of the service kit (part number 07900-04750(S)). SERVICE KIT ITEM PART Nº DESCRIPTION Nº OFF ITEM PART Nº DESCRIPTION Nº OFF 07900-00002
More informationConversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
More informationParts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationATLAS TRANSFER CASES CABLE SHIFTER units built before 4/30/12
Paso Robles, CA 93447 PAGE 1 OF 5 Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-12-15 KIT CONSISTS OF: No. Qty Part No. Description 1. 1 302051 TWIN STICK BASE MOUNT 2. 1 302060 TWIN
More informationType 431, 433. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.01-E Conventional design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate
More informationParts Catalog. S-Series Slicer Standard Automatic Frozen Option S13A. Model:
, 08 995 ECN 0 Parts Catalog S3A S-Series Slicer Standard Automatic Frozen Option Model: S3A 0/09/08 Rev. W IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL
More informationRZ3016. Parts Manual. Zero Turn Mower /
Parts Manual RZ30 Zero Turn Mower / 966612302-04 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationKeystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
More informationKEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationFKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
More informationGrabTec. Farm Grapple OWNER S MANUAL. GF and GFD Models
Farm Grapple OWNER S MANUAL GF and GFD Models Grabtec Inc May 2014 Install Center/Shipping/Receiving: 1242 Arizona Ave Larchwood, IA 1241 (888) 87-892 (712) 477-267 PREFACE This manual describes the installation,
More informationLT Spare parts list. Rammer. Valid from serial number. LT mm, (9 in.) 2014 Construction Tools EOOD No a
LT 5005 Spare parts list Rammer LT 5005 150 mm, (6 in.) LT 5005 230 mm, (9 in.) Valid from serial number BGF000001 BGF000001 2014 Construction Tools EOOD No. 9800 1626 01a 2014-08-04 LT 5005 Spare parts
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationSection 9 Pins, Rings, Springs & Hooks
Section 9 Pins, Rings, Springs & Hooks Contents...Page # Springs...234 Ajax Wire...235 Tube Assortments...236 Springs...237-242 Retaining Rings...243 Basic External Retaining Rings...244 Retaining Rings...245
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationFITTINGS COUPLINGS BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE
BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 139 HOSES Bauer Type B Couplings
More informationParts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
More informationWJ AUTO TRANS. ATLAS SHIFTER
KIT CONSISTS OF: No. Qty Part No. Description 4320 Aerotech Center Way, Page 1 of 8 1 1 302051 BASE- ATLAS TWIN STICK MOUNT 2 1 302080 STUD BOLT 1/2-13 X 7 B7 3 1 303120 Serrated-Flange Hex Locknut 1/2-13
More informationReplacement Part Diagrams SG12 Series Surface Grinder
Replacement Part Diagrams SG Series Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn: xxx, PAGe: Frame Assembly SG/E Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn:
More informationBulb Number Part Number Description BLOCK, STOP
Bulb Number Part Number Description 1 11000-384 BLOCK, STOP 2 11040-301 CLAMP BLOCK INSERT 6 12000-307 PIN, PIVOT 7 12000-337 SHAFT, PIVOT, 12.75 11 12000-345 FOOT PAD, 4.00 x 7.00 19 12000-398 SPACER
More informationB436, B436E, B436SD WALK-BEHIND TROWEL
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-905-364-4200 Toll Free: 1-866-501-1683 Fax: 1-905-364-4201 B436, B436E, B436SD WALK-BEHIND TROWEL Doc. # Orig. Rel. 06/2016
More informationAuto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
More informationHardened & Ground Linear Shafts
56 Hardened & Ground Linear Shafts Hardness: Carbon Steel 61-66 Rockwell C Corrosion Resistant Steel 54-56 Rockwell C Tolerance: h6 standard, special tolerances upon request Finish: Ground and polished
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationSPIRIT - FRAME ASSEMBLY
Titel - 1 - Titel - 2 - Table Of Contents QUICKIE SPIRIT... 4 FRAME... 4 SPIRIT - FRAME ASSEMBLY... 4 SEATING... 6 SPIRIT - STD SEAT AND BACKREST... 6 SPIRIT - UNISUN BACKREST- DISCONTINUED... 8 HANGERS
More informationPARTS LIST CHARGER 2020 AB CHARGER 2020 DB
PARTS LIST CHARGER 2020 AB CHARGER 2020 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495511 CONTROL FRAME WELDMENT 1 102 9121390 11/32 I.D. X 11/16 O.D. X.051/.080 THICK SAE FLAT WASHER (5/16) 2 103 9121450
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS When this Jack leaves the factory, the air release plug is closed to prevent the oil being spilled when the Jack is in transit. To simplify the air-venting of the oil chamber, a
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationLubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationTT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
More informationAluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
More information5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
More informationQUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
More informationParts Catalog. S-Series Slicer Standard Automatic S13A. Model:
, 08 99508 ECN 0 Parts Catalog S-Series Slicer Standard Automatic Model: SA SA 0/5/8/08 Rev. Y IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationRexroth. Spare parts list. Bosch Group. Part No.: R Designation: A4VG28HW1/30R-PZC10N001E-S
: R909442713 : A4VG28HW1/30R-PZC10N001E-S *G* R909709194 1 R909434314 ROTARY GROUP L 2 R909600897 CONTROL, HYDRAULIC L 3 R909428735 PORT PLATE WITH VALVES L 6 R909600949 CONTROL MODULE L 8 R909426341 HOUSING
More informationType 441 DIN 442 DIN. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 462.02-E 462.01-D Conventional design 40 Cap H2 18 Adjusting screw 19 Lock nut 16 Upper spring plate
More informationSpare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
More informationSpare parts list ( ) Spare parts list Pivot EN
Spare parts list (5.971-060.0) Spare parts list Pivot 2011-06-17 EN Table of contents Spare parts list Pivot (5.971-060.0)... 3 10 Retaining bracket and switch (0.201-344.0)... 4 11 Retaining bracket (0.201-345.0)...
More informationON-THE-VEHICLE BRAKE LATHE
800 ON-THE-VEHICLE BRAKE LATHE Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease
More informationSTEERING AND SUSPENSION section 2
STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three
More informationColVic Tanker Fittings
Tanker Fittings tanker fittings for fuel tankers are designed and manufactured by to accepted industry standards. All the fittings have full product and installation support and are available at short
More informationRZCG... AP54... AP6452 AP6462 AP6472. Open cells foam for protection loudspeakers. Thickness from 5 to 20 mm. Protection grilles for Speaker
1 2 RZCG... Open cells foam for protection loudspeakers. Thickness from 5 to 20 mm material: Polyurethane weight: 75-300 gr/m² AP54... Protection grilles for Speaker material: Steel 12/10 weight: 80-960
More informationMAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
More informationNorden. A Lancashire Mill Engine. Scale: 1:12
Scale: 1:12 Neil M. Wyatt February 2009 Fig. 1: General Arrangement General Arrangement Sheet: 1 An Old Steam Engine DEAR SIR, In the ruins of an old mill at, near Rochdale, there is an old steam engine
More informationFORD TERRITORY TOWBAR FITTING INSTRUCTION Part # VEHICLE YEARS OF MANUFACTURE - From May
The installation kit contains sufficient components for fitment*. Do not substitute any components. A high degree of technical competence is necessary to correctly install this product. We recommend this
More informationCONVEYOR COMPONENTS & ACCESSORIES
STION 28 - ONVYOR OMPONNTS & SSORIS ONVYOR OMPONNTS & SSORIS ipod, Tripod & ross ases... 28-3 Side Guides... 28-9 Joints & Supports... 28-4 onveyor Tube... 28-10 lamps & Rods... 28-5 to 28-8 Mounting rackets...
More informationPARTS CATALOG ODYSSEY INCLUDES MOWER
PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL
More informationSPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
More informationReproduction. Not for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES. Parts Manual for RE210
Parts Manual for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES Model No. Description 7800952-00 RE210 Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, 30253 U.S.A. 800-935-2967
More informationPrecision Gear Capabilities. PIC Keeps You On Target
Precision Gear Capabilities PIC Keeps You On Target Unparalleled Technical Support. Documented Quality. From optical targeting systems, to surgical robots, to spectroscopy equipment, PIC Design provides
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 28V SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER 28VG100000 28VD100000 07 Sno-Way International 9710097F TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... 2 POWER PACK FRAME...
More informationHeavy-Duty Rod Ends - Male with integral spherical plain bearing
Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6
More informationRatcheting Pullers Reversible Puller Combination Pullers Slide Hammer Pullers Heavy Duty C-Clamps...
C L A M P I N G & P U L L I N G Ratcheting Pullers... 1137 Reversible Puller... 1139 Combination Pullers... 1139 Slide Hammer Pullers... 1139 Heavy Duty C-Clamps... 1141 General Service C-Clamps... 1142
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationCS8 RANDOM CRACK SAW FORM GOM , VERSION Replacement Parts Diagrams CS8 Series Crack Saw
FORM GOM590, VERSION. 5 Replacement Parts Diagrams FORM GOM590, VERSION. 5 Operator Handle Assembly CS/G Series Crack Saw FORM GOM590, VERSION. 55 Operator Handle Assembly CS/G Series Crack Saw Number
More informationSpare parts list Trowel STG244 F TP
Spare parts list Trowel STG244 F TP Valid from serial number Valid to serial number BGF111601- www.cp.com STG244 F TP Spare parts list General information This spare parts list applies to the following:
More informationPARTS LISTS AND DIAGRAMS
PARTS LISTS AND DIAGRAMS Duetz-Allis Gleaner Combine Crary Company 237 NW 12th St. PO Box 849 West Fargo, ND 58078-0849 (800)247-7335 FAX: (701)282-9522 www.crary.com Part #12088 Companion to Part #12071
More informationPARTS LISTING C WR
LR 0. PARTS LISTING 00C WR 0-- SCHEMATIC TRACTOR - - MODEL NUMBER LR (00C) RED BLACK BATTERY RED FUSE 0 AMP. RED M STARTER BLACK WHITE B G S M L CLUTCH / BRAKE (PEDAL UP) SOLENOID WHITE IGNITION SWITCH
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More informationSteel Conduits Conduit Fittings Flexible Conduits
Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;
More informationFirst, check and record the camber and caster readings, they will be adjusted later.
First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationRZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0
Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,
More information