SELWOOD SELTORQUE S150

Transcription

1 SELWOOD SELTORQUE S150 With solids handling capabilities of up to 100mm and indefinite dry running ability, the Selwood Seltorque range of vortex pumps form the foundation upon which the company s international reputation has been built. One of Selwood s original pump designs, its simplicity offers easy operation and unparalleled reliability coupled with inherent safety. The environmentally friendly Seltorque range has the unique Selprime automatic self priming system together with an oil immersed mechanical seal enabling them to operate in the most arduous of circumstances encountered in the construction, mining and municipal industries. These pumps offer completely automatic priming from depths of 9.1 metres (30 feet) and unequalled performance in effluent disposal and slurry handling. Selprime The unique original Selwood self priming system utilising a water tolerant diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated with other priming systems. S100 updated 11/02 Seltorque S rpm m ft m 3 /h 1/25

2 NOTES: Linear seal assembly 1. Complete assembly available as Part No D U P A G R O. C O M 2. Linear Bearing and Seal Assembly (A25) Part Nos , and available as sub-assembly Part No Ensure that seal components are positioned as shown above, and are retained by the internal circlip. Great care must be exercised when fitting the circlip to ensure that the lip of the wiper seal is not damaged by the hand tools used. Refer to Section 5.3 Impeller, Mechanical Seal and Delivery Valve Maintenance. 4. To safeguard the sealing lips, lubricate the bearing and seals with light oil and use seal installation tool when fitting assembled housing unit to pump assembly. Refer to Section 5.4 Maintenance of Flushing Chamber, Air 2/25

3 SELWOOD S150 Air Pump Parts (Single Prime) Item Part Number Description QTY A Air Hose (A ) 1 A Hose Clip (A ) 2 A Suction Valve Box (A ) 1 A Exhaust Valve Cover (A ) 1 A Hex. Nut M6 (A ) 8 A Spring Washer M6 (A ) 8 A Suction and Delivery Valve (A ) 2 A Valve Stud (A ) 2 A Valve Washer (A ) 2 A Stud M8 (A ) 8 A Full Nut M10 (A11/A ) 8 A Spring Washer M10 (A ) 8 D A U P Washer A M10 (A ) G R O BV 8 A Hex. Head Bolt M10 x 35 (S150:A ) 8 A Outer Pump Body (A ) 1 A Actuator Valve (A ) 1 A Actuator Screw (A ) 1 A Actuator Seal (A ) 1 A Inner Pump Body (A ) 1 A Actuator (A ) 1 A Conn. Rod Seal (A ) 1 A Cap Screw M12 x 50 (A ) 2 A Cap Screw Washer (A ) 2 A Bearing and Seal Housing (A ) 1 A Drive Rod Seal Assembly (A ) 1 A Internal Circlip (A26 94D130050A) 1 A Housing Gasket (A ) 1 A Drive Rod Bearing (A ) 1 A Drain Tap (A ) 2 A Suction Valve Box Gasket (A ) 1 A Stud M8 (A ) 4 A Blanking Plate Gasket (A ) 1 A Blanking Plate (A ) 1 A Hex. Head Screw M12 x 20 (A ) 4 B Spring Washer M10 (B ) 4 A Drive Rod Seal Carrier (A ) 1 A Internal Distributor Seal (A ) 1 A Wiper Seal (A ) 1 3/25

4 4/25

5 SELWOOD S150 Air Pump Parts (Twin Prime) Item Part Number Description QTY A Hose Clip (A ) 8 A Suction Valve Box (A ) 2 A Exhaust Valve Cover (A ) 2 A Hex. Nut M6 (A ) 16 A Spring Washer M6 (A ) 16 A Suction and Delivery Valve (A ) 4 A Valve Stud (A ) 4 A Valve Washer (A ) 4 A Stud M8 (A ) 8 A Full Nut M10 (A11/A ) 16 A Spring Washer M10 (A ) 16 A Washer M10 (A ) 16 A Hex. Head Bolt M10 x 35 (S150:A ) 16 A Outer Pump Body (A ) 2 A Actuator Valve (A ) 2 A Actuator Screw (A ) 2 A Actuator Seal (A ) 2 A Inner Pump Body (A ) 2 A Actuator (A ) 2 A Conn. Rod Seal (A ) 2 A Cap Screw M12 x 50 (A ) 8 A Cap Screw Washer (A ) 8 A Bearing and Seal Housing (A ) 2 A Drive Rod Seal Assembly (A ) 2 A Internal Circlip (A26 94D130050A) 2 A Housing Gasket (A ) 2 A Drive Rod Bearing (A ) 2 A Drain Tap (A ) 4 A Suction Valve Box Gasket (A ) 2 A Stud M8 (A ) 8 A Air Hose (A ) 1 A Air Hose (A ) 1 A Air Hose (A ) 1 A Hose Tee (A ) 1 A Hose Bend (A ) 1 5/25

6 6/25

7 SELWOOD S150 Separator Parts (Single Prime) Item Part Number Description QTY A Full Nut M10 ( ) 4 A Spring Washer M10 ( ) 4 B Separator Cap ( ) 1 B Separator Cap Gasket ( ) 1 B Port Plate ( ) 1 B Hexagon Head Screw M10 x 20.S.S. ( ) 2 B Sealing Washer M10 ( ) 2 B Upper Diffuser Sub-Assembly ( ) 1 B Upper Diffuser Bush ( ) 1 B Upper Diffuser Bush Clip ( ) 1 B Hexagon Head Screw M10 x 30.S.S. ( ) 4 B Spring Washer M10 S.S. ( ) 4 B Float ( ) 1 D B U P Full Nut A 5/16" B.S.W. G S.S. ( ) R O BV 1 B Operating Rod ( ) 1 B Full Nut M8 S.S. ( ) 1 B Operating Plate ( ) 1 B Slotted Head Screws M4 x 20. S.S. ( ) 6 B Locking Nut M4 S.S. ( ) 6 B Washer M4 S.S. ( ) 6 B Clamp Bar ( ) 3 B Clamp Bar Seal ( ) 1 B Peel Valve Rubber ( ) 1 B Separator Body ( ) 1 B Plug ½" B.S.P.T. ( ) 1 B Lower Diffuser ( ) Lower Diffuser Sludge Version ( ) 1 B Separator Body Gasket ( ) 1 B Tie Rod ( ) 4 B Suction Tube ( ) 1 B Suction Tube Gasket ( ) 1 B Full Nut M12 ( ) 4 B Spring Washer M12 ( ) 6 B Full Nut M16 ( ) 8 B Stud M16 ( ) 8 B Selwood Label ( ) 1 B Seltorque Label ( ) 1 B Dome Nut M12 ( ) 2 B Washer - Nitrile ( ) 1 B Spring Washer M16 ( ) 8 B Separator Handle ( ) 2 B Socket Cap Screw M6 x 25 S.S. ( ) 4 B Plain Washer M6 ( ) 4 Sub-Assembly B06 includes B0, B08 and B35. Items B05, B07, B08, B16, B17, B18, B20 and B21 are available as spares kit /25

8 8/25

9 SELWOOD S150 Separator Parts (Twin Prime) Item Part Number Description QTY A Full Nut M10 ( ) 4 A Spring Washer M10 ( ) 4 B Separator Cap ( ) 1 B Separator Cap Gasket ( ) 1 B Port Plate ( ) 1 B Hexagon Head Screw M10x20.S.S.( ) 2 B Sealing Washer M10 ( ) 2 B Upper Diffuser Sub-Assembly ( ) 1 B Upper Diffuser Bush ( ) 1 B Upper Diffuser Bush Clip ( ) 1 B Hexagon Head Screw M10x30.S.S.( ) 4 B Spring Washer M10 S.S. ( ) 4 D B U P Float ( ) A G R O BV 1 B Full Nut 5/16" B.S.W. S.S. ( ) 1 B Operating Rod ( ) 1 B Full Nut M8 S.S. ( ) 1 B Operating Plate ( ) 1 B Slotted Head Screws M4 x 20. S.S. ( ) 6 B Locking Nut M4 S.S. ( ) 6 B Washer M4 S.S. ( ) 6 B Clamp Bar ( ) 3 B Clamp Bar Seal ( ) 1 B Peel Valve Rubber ( ) 1 B Separator Body ( ) 1 B Plug ½" B.S.P.T. ( ) 1 B Lower Diffuser ( ) Lower Diffuser Sludge Version ( ) 1 B Separator Body Gasket ( ) 1 B Tie Rod ( ) 4 B Suction Tube Gasket ( ) 1 B Full Nut M12 ( ) 4 B Spring Washer M12 ( ) 4 B Full Nut M16 ( ) 8 B Stud M16 ( ) 8 B Selwood Label ( ) 1 B Seltorque Label ( ) 1 B Separator Chamber (Well Pointing) - Optional ( ) 2 B Dome Nut M12 ( ) 2 B Washer - Nitrile ( ) 1 B Separator Screen ( ) 1 B Spring Washer M16 ( ) 8 B Separator Handle ( ) 2 B Socket Cap Screw M6 x 25 S.S. ( ) 4 B Plain Washer M6 ( ) 4 9/25

10 10/25

11 SELWOOD S150 Pump Body Parts Item Part Number Description QTY C Impeller Screw STEEL (C ) 1 C Impeller Screw S.S. (C ) 2 C Belleville Washer (C ) 1 C Impeller Washer (C ) 1 C04 see below Impeller 1 C Impeller Key (12 x 8 x 50) (C ) 1 C Shaft Sleeve (C ) 1 C Sleeve O-Ring (C ) 1 C Mechanical Seal C ) 1 C Pump Body (C ) 1 C Stud M12 (C ) 6 A Full Nut M12 (B29/A ) 8 D A U P Spring Washer A M12 G (B30/A ) R O BV 8 C Body Gasket (C ) 2 C Stud M12 (C ) 8 C Drain Tap 3/8" BSPT (C ) 1 ALTERNATIVE IMPELLERS: 0 C Standard S.G. Iron Impeller Diameter (C ) 1 C Non-Standard Iron Impeller 232 Diameter, Suffix B (C ) 1 C Non-Standard Iron Impeller 229 Diameter, Suffix C (C ) 1 C Non-Standard Iron Impeller 225 Diameter, Suffix D (C ) 1 C Non-Standard Iron Impeller 222 Diameter, Suffix E (C ) 1 C For Deutz & twin prime, Standard Iron Impeller 219 Diameter, Suffix F 1 (C ) 11/25

12 12/25

13 SELWOOD S150 Delivery Valve Parts Item Part Number Description QTY B Full Nut M16 (B ) 4 C Spring Washer M16 (A38/B39/C ) 4 C Delivery Valve Seat (C ) 1 C Delivery Branch Gasket (c ) 2 B Stud M16 (B ) 4 C Delivery Valve Chamber (c ) 1 C T-Bolt (C ) 1 C Hex. Head Bolt M16 x 65 (C ) 1 C Plain Washer M16 (C ) 1 C Locking Bar (C ) 1 C Drain Tap 3/8" BSPT (C ) 1 C Inspection Panel (C ) 1 C Inspection Panel Gasket (C ) 1 C Lower Valve Plate (C ) 1 C Delivery Valve Rubber (C ) 1 C Delivery Valve Clamping Bar (C ) 1 C Hexagon Head Screw M10 x 30 (c ) 2 A Washer M10 (A ) 2 C Upper Valve Plate (C ) 1 C Locking Nut M12 (C ) 1 C Check List Label (C ) 1 C Valve Spacer (as required) (C ) A/R 13/25

14 14/25

15 SELWOOD S150 Bearing Housing and Air Pump Drive Assembly Parts Item Part Number Description D Hex. Socket Capscrew M8 x 25 (D ) 3 3 A Spring Washer M8 (A12/A ) 3 3 D Lip Seal Carrier (D ) 1 1 D Lip Seal (D ) 3 3 D O-Ring (D ) 1 1 D Bearing Housing (D ) 1 1 D Bearing Housing Close Coupled (D ) 1 1 D Oil Filter/Level Check Plug (D ) 2 2 D Label - Direction of Rotation (D ) 2 2 D Hammer Drive Screw No. 2 x 1/4" (D ) 1 1 D10 D U Breather P Valve A 1/8 in BSPT G (D ) R O BV 2 2 D Label - Manufacturer (D ) 1 1 D Breather Valve 1/8 in BSPT (D ) 2 2 D Flanged Drain Plug ¾ - BSP (D ) 1 1 D Sealing Washer ¾ - BSP (D ) 1 1 D Roller Bearing (D J31130) 1 1 D Rect Parallel Key (Pump Coupling) 14x9x56 (D ) 1 1 D Drive Shaft (D ) 1 1 D Ball Bearing (D ) 1 1 D Spacer (D ) 1 1 D Bearing Carrier (D ) 1 1 D Plain Washer M12 (D ) 4 4 D Hex. Head Setscrew M12 x 90 (D ) 4 4 D Eccentric (D ) 1 1 D Circlip External (D ) 1 1 D Large End Bush (D ) 1 2 D Connecting Rod (D ) 1 2 D Hex. Socket Capscrew M8 x 35 (D ) 1 2 D Fulcrum Pin (D ) 1 2 C Body Gasket (C ) 2 2 D Circlip-External (D ) 1 1 D Hex. Socket Capscrew M10 x 60 (D ) 3 3 A Spring Washer M10 (A ) 3 3 D Flushing Chamber (D ) 1 1 D Drain Plug ½ - BSPT (D ) 1 1 D Small End Bush (D ) 2 4 D Actuator Screw (A ) 1 2 D Air Pump Drive Rod (D ) 1 2 D Self Locking Nut - M8 (D ) 1 2 C Impeller Key (12 x 8 x 50) (C ) 1 1 Items D27, D36, D37 and D38 can be supplied as Sub-Assembly Part No Items D25, D26 and D35 are supplied as Sub-Assembly Part No Single Prime QTY Twin Prime 15/25