Hardened & Ground Linear Shafts
|
|
|
- Osborn Dixon
- 6 years ago
- Views:
Transcription
1 56 Hardened & Ground Linear Shafts Hardness: Carbon Steel Rockwell C Corrosion Resistant Steel Rockwell C Tolerance: h6 standard, special tolerances upon request Finish: Ground and polished to 8-12 cla Straightness: standard Modifications: Drilled and tapped holes, retainer grooves etc. available (send drawing) Carbon Steel Stainless Steel Diameter Tolerance Depth of L BS 070M55 A1S1 440C D h6 hardness (maximum) CSS 6M SSS 6M mm -8 CSS 8M SSS 8M mm -9 CSS 10M SSS 10M mm -10 CSS 12M SSS 12M mm -11 CSS 14M SSS 14M mm -11 CSS 16M SSS 16M mm -11 CSS 20M SSS 20M mm -13 CSS 25M SSS 25M mm mm standard (enquire for longer length if required) CSS 30M SSS 30M mm -13 CSS 40M SSS 40M mm -16 CSS 50M SSS 50M mm -16 CSS 60M SSS 60M mm -19 CSS 70M SSS 70M mm -19 CSS 80M SSS 80M mm Diameter Tolerance :0.001mm Order by Part number and length (ie.: SSSÐ12MÐ500mm)
2 Shaft Support Rails 57 Medium Height Series - WUM Part No D h6 B H ±0.02 V N1 N2 d1 d2 M ( ) E T1 T2 Weight WUM WUM WUM WUM WUM WUM WUM WUM Ñ Ñ Ñ 3.16 WUM Ñ Ñ Ñ 4.86 Tall Height Series - WUH Part No D h6 H ±0.02 V B A ±0.02 M E ±0.15 N S T1 T2 Weight WUH M WUH M WUH M WUH M WUH M WUH M
3 58 Linear Bearing Carriages Quadruple open self aligning linear ball bearing, two integral seals, lubrication hole M8 x 1 Load (N) Part No d D1 A H H 1 H3 R N E S S1 C (Dyn.) Co (Stat.) Weight Length QAG-08-S M QAG-12-S M QAG-16-S M QAG-20-S M QAG-25-S M QAG-30-S M QAG-40-S M The bearing will be fixed in the housing by means of retaining rings per DIN 472 Load ratings indicated apply only for hardened and ground shafts. Load (N) Part No d D1 A H H1 W R N E S S1 C (Dyn.) Co (Stat.) Weight Length QAG-OP-12-S M QAG-OP-16-S M QAG-OP-20-S M QAG-OP-25-S M QAG-OP-30-S M QAG-OP-40-S M The bearing will be fixed in the housing by means of a retainsion screw. Load ratings indicated apply only for hardened and ground shafts.
4 End Blocks 59 Clearance Hole Fixing Part No d A B H H2 ±0.015 R ØS E Weight TAA TAA TAA TAA TAA TAA TAA Tapped Hole Fixing Part No d A B H1 H3 ±0.015 R M E Weight TAB M TAB M TAB M TAB M TAB M TAB M TAB M
5 Ø F Ø G Ø H 60 Precision Leadscrews Hole K C B D E A/2 L A 5mm E L Hole K Materials: Screw: Stainless Steel (400 Series) Nut: Delrin Lead Error: ± 0.10mm/100mm Repeatability: 0.08mm Straightness: 0.05mm/100mm Backlash: 0.08mm Temp Range: -18 C to +93 C Rectangular nut Round nut Dia. Lead A B C D E ØF ØG ØH K L TTM4KS1 300 TTM4LS TTM6KS2 300 TTM6LS TTM8KS4 300 TT8MLS TTM10KS2 500 TTM10LS TTM10KS TTM10LS One hole per side TTM12KS5 500 TTM12LS TTM12KS TTM12LS TTM16KS TTM16LS TTM16KS TTM16LS TTM20KS TTM20LS TTM20KS TTM20LS TTM20KS TTM20LS TTM25KS TTM25LS TTM25KS TTM25LS TTM25KS TTM25LS
6 Antibacklash Leadscrew 61 Slimline Series A Dia. D C E L H T Hole F on B P.C.D. Materials: Screw: Stainless Steel (400 Series) Nut: Delrin Lead Error: ± 0.10mm/100mm Repeatability: 0.08mm Straightness: 0.05mm/100mm Backlash: Zero Temp Range: -18 C to +93 C Part Number Dia. Lead ØA ØB ØC ØD E (max.) H T Hole F L TTMS4ABS TTMS6ABS TTMS8ABS TTMS10ABS TTMS10ABS TTMS12ABS TTMS12ABS TTMS16ABS TTMS16ABS TTMS20ABS TTMS20ABS TTMS20ABS TTMS25ABS TTMS25ABS TTMS25ABS
7 62 Antibacklash Leadscrew Full Nut Series A Dia. D C H Hole F E L T Materials: Screw: Stainless Steel (400 Series) Nut: Delrin Lead Error: ± 0.10mm/100mm Repeatability: 0.08mm Straightness: 0.05mm/100mm Backlash: Zero Temp Range: -18 C to +93 C Part Number Dia. Lead ØA ØB ØC ØD E (max.) H T Hole F L TTM4ABS TTM6ABS TTM8ABS TTM10ABS TTM10ABS TTM12ABS TTM12ABS TTM16ABS TTM16ABS TTM20ABS TTM20ABS TTM20ABS TTM25ABS TTM25ABS TTM25ABS
8 Commercial Leadscrews 63 Stainless Steel Leadscrews, R H and L H Threads Manufactured to ISO Standard, DIN 103 Features Single start Rolled High tensile strength Accurate Tooth profile Trapezoidal thread form High resistance to abrasion Press finished thread flank Tolerance Zone: 7e Standard Accuracy: ± 0.15mm/300mm Material: Radial Deviation: 10 to 24 = 0.8mm/Metre 28 to 50 = 1.2mm/Metre Length (mm) Diameter x Lead (mm) Hand x 3 RH 641Ð Ð Ð Ð310 LH 641Ð Ð Ð Ð810 12x 3 RH 641Ð Ð Ð Ð312 LH 641Ð Ð Ð Ð x 4 RH 641Ð Ð Ð Ð314 LH 641Ð Ð Ð Ð x 4 RH 641Ð Ð Ð Ð316 LH 641Ð Ð Ð Ð x 4 RH 641Ð Ð Ð Ð320 LH 641Ð Ð Ð Ð x 5 RH 641Ð Ð Ð Ð324 LH 641Ð Ð Ð Ð x 6 RH 641Ð Ð Ð Ð330 LH 641Ð Ð Ð Ð x 6 RH 641Ð Ð Ð Ð336 LH 641Ð Ð Ð Ð x 7 RH 641Ð Ð Ð Ð340 LH 641Ð Ð Ð Ð x 8 RH 641Ð Ð Ð Ð350 LH 641Ð Ð Ð Ð850
9 64 Commercial Leadscrew Nuts Round Nut Design Single-thread right Single-thread left Trapezoidal Steel Red Bronze Nylatron Steel Red Bronze Nylatron Threads Ø Part No. Part No. Part No. Part No. Part No. Part No. L ØD 10 x x x x x Materials: Steel: C35 Bronze: RG7 Nylatron: GSM Tolerance Zone: 7H 24 x x x x x x x x x Hexagonal Nut Design Single-thread Trapezoidal Left Right Threads d Ø L A/F Part No. Part No. 10 x x x x x Materials: Steel: C35 Tolerance Zone: 7H 24 x x x x x x x x x Flanged Nut Design Single-thread right Single-thread left DIN 7168 Trapezoidal Grey cast Iron Red Bronze Grey cast Iron Red Bronze Øh11 Threads Ø Part No. Part No. Part No. Part No. a b d1 d2 10 x x x x x x x x x x x x x x Materials: Steel: C35 Bronze: RG7 Tolerance Zone: 7H
Linear Motion Flanged Trapezoidal Nuts
Linear Motion Flanged apezoidal Nuts Material Cast Iron GG25 DIN 103 Round, Flanged without holes, Quality 8 H d x p L I da dn 1-5 List Price 6-19 -10% 20-39 -20% 40-59 -30% 60-99 -35% 100-499 -40% 500-999
1) Retractable nipple with centering 2) Retractable nipple with equalizer 3) Retractable nipple without centering
The critical contrasts between "stable clamping" and the required "flexibility for heat expansion" have been ideally solved with the Stark zero point mounting system. There are 3 different retraction nipples:
Safety Chuck CSB25P, CSB25F, CSB50P, CSB50F, CSB75P, CSB75F, CSB125P, CSB125F CSB150P, CSB150F, CSB175P, CSB175F
Web Control s Technical Data Sheet Safety Chuck CSB5P, CSB5F, CSB50P, CSB50F, CSB75P, CSB75F, CSB15P, CSB15F CSB150P, CSB150F, CSB175P, CSB175F Nexen's line of rugged safety chucks provide roll shaft support
Linear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
Bearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
LINEAR COMPONENTS. Table of Contents
LINEAR COMPONENTS Table of Contents ACME LEAD SCREWS, NUTS & FLANGES ME 2 - E 5 Technical Data............................. ME 2 Lead Screw, Nuts & Flanges............ME 3 - ME 4 Lubricating Spray...........................ME
Technical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
Leadscrews and Leadscrew Assemblies
Leadscrews and Leadscrew Assemblies Section Contents Leadscrew and Assemblies Product Overview...Page 7 2 Selection Guide...Page 7 6 Leadscrew Sizes...Page 7 7 Leadscrew s...page 7 12 Modified and Custom
Linear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
Cam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.
1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,
HepcoMotion MHD Heavy Duty Track Roller Guidance System
Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly
ASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
Gear Clamps and Accessories
Gear Clamps and Accessories Section Contents Shafts Ground Stock...Page 11 2 Shaft Retaining Collars...Page 11 3 Gear Clamps...Page 11 4 Gear Clamps ow Inertia...Page 11 5 Gear and Dial Hubs Pin Type...Page
flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
Performances. Standard range dedicated to servo-applications requiring precision, robustness and economy. Up to 290 Nm rated 6
RATIO GROUP A: 1 stage, i = 4-5 - 7-10 2 stages, i = 16-20 - 25-28 - 35-40 - 49-50 - 70-100 RATIO GROUP B: 1 stage, i = 3-4 - 5-7 - 10 2 stages, i = 12-15 - 16-20 - 21-25 - 28-35 - 40-49 - 50-70 - 100
Standard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
Performance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS Table of Contents HUBS Gear, Dial and Sprocket Assembies - Tech Info.....MI 2 Phase Adjustable Hub........................MI 3 Quick-2-Lock Hub..........................MI
HEAVY DUTY WORM GEARBOX MODEL SBWG
FEATURES AND BENEFITS The SBWG model is suitable for use with Butterfly, Plug and any other type requiring quarter turn motion for thrust and torque applications High Tensile Aluminium bronze material
E-Series Screw Jacks. Metric Machine Screw Jack. Stainless Steel Machine Screw Jack. Metric Ball Screw Jack
E-Series Screw Jacks Metric Machine Screw Jack Stainless Steel Machine Screw Jack Metric Ball Screw Jack E-Series 1 BEST ENGINEERED SOLUTION FOR PRECISION LINEAR ACTUATION, POWER TRANSMISSION & MECHANICAL
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
www.motiontech.com.au Copyright SERVOMECH This catalogue contents are under publisher copyright and may not be reproduced unless permission is agreed. Every care has been taken to ensure the accuracy of
Roller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
Ball Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
Vane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
Ballscrews. Rotating Nut ballscrews. Ballscrew X-Y retrofits for mills. Precision ground accuracy to mm/300mm. High load drive 50 to 350T
Ballscrews An ideal drive mechanism where constant motion or high frequency cycling is required. Ballscrews provide highly efficient transmission with low starting torque, smooth running and quiet operation.
Avseal II Blind Sealing Plug
Avseal II Blind Sealing lug Since 1922 Since 1936 2010 Avseal II The new range of Avseal II blind sealing plugs is unique in the efficient sealing performance provided in low- and high-pressure hole sealing
Highest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
Precision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
4 Bevel gear boxes Structural configurations K...13 range NORMA range KA and KV range 119
Contents Bevel gear boxes 117-133.1 Structural configurations 118-119.1.1 K...13 range 119.1.2 NORMA range 119.1.3 KA and KV range 119.2 Project planning 120-123.2.1 Technical information 120.2.2 Dimensioning
PROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
Flow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
Precision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
NUTS, WASHERS, SCREWS & STUDS WDS SECTION 8 - NUTS, WASHERS, SCREWS & STUDS
SECTION 8 - NUTS, WASHERS, SCREWS & STUDS NUTS, WASHERS, SCREWS Hexagon (Standard) Nuts M4-M2 Collar Nuts Spherical Seating Nuts Acorn Nuts Coupling Nuts Quick Action Nuts Standard Washers Heavy Duty Jig
XFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
MTF. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V, 60Hz and 200-240V, 50Hz ( types are supplied without capacitor); suitable for use with an inverter from 20Hz
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Runner block FNS R Flanged, normal, standard height
38 Bosch Rexroth Corporation Roller Rail Systems R310A 30 (007.06) Standard Runner Blocks, Steel version Runner block FS R1851... 10 Flanged, normal, standard height Further runner block versions with
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
ARITA. ARITA Scotch Yoke Pneumatic Rotary Actuator. Position Indicator. NAMUR Drive Shaft (Hexagon or Double flat)
ARITA Position Indicator - The Top Direction - A. Position Indicator B. Limit Switch Box C. Proximity Sensor D. E/P Positioner E. Position Transmitter F. Manual Lever -Flat -Dome NAMUR Drive Shaft (Hexagon
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
Servomechkaramoottorit
Solutions for power transmission Servomechkaramoottorit www.konaflex.fi INDEX 1 Servomech 1. THE PRODUCT 1.1 SERVOMECH Linear Actuators......................... Page 2 1.2 SERVOMECH Linear Actuators range............................
The STH is a mid-range speed and torque gear reducer that
-SERIES The is a mid-range speed and torque gear reducer that sets a new standard for rotary positioning performance at an exceptional price point. A SHIMPO ABLE planetary gearbox is the interface between
ZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
NIASA was born in 1984 as a result of the expansion of the German group NEFF.
2 The experience acquired throughout these 25 years sharing the concerns of our customers makes us rich in providing solutions, technical capacity and above all respect and prestige among the major actors
PNCE ELECTRIC CYLINDER
ELECTRIC CYLINDER INDEX Characteristics 1 Structural design 2 How to order 3 Technical data 4 Dimensions 11 Accessories 12 Lubrication position 2 Motor adapter with coupling 2 Motor side drive with timing
GEAR ACTUATORS For multi-turn valves
GEAR ACTUATORS For multi-turn valves VEAN GEAR ACTUATORS offer a superior combination of features for reliable and dependable service for multi-turn valves. Engineered to meet all applications and environmental
CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
Planetary and Right Angle Gearboxes
Planetary and Right Angle Section Contents Gearbox Range Overview...Page 32 Planetary Overview...Page 33 Section Views...Page 34 RGP40 Series...Page 3 RGP0 Series...Page 3 RGPN70 Series...Page 3 Bevel
3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
Main Catalogue. EichenbergerGewinde. 100 % Swiss made
EichenbergerGewinde 100 % Swiss made Main Catalogue Carry ball screws Carry Speed-line high-helix ball screws Speedy high-helix lead screws Rondo round thread lead screws The choice is yours Thread rolling
ZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
BREADBOARD COMPONENTS
BREADBOARD COMPONENTS DIALS Drum Dials.... MD 2 - MD 3 Flat Dials.... MD 4 Engraved Flat Disks............................. MD 5 Flat Dial Index.... MD 6 Drum Dial Index.... MD 6 Engraved Index.... MD
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
Trunnion Ball Valve Catalogue
Trunnion Ball Valve Catalogue Introduction "Fusion" is the registered trademark of Archmetal Industries, a member of the Fortune Group. * The Fortune Group is a world class producer of a full range of
124
124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High
ACCESSORIES. Page: 263
08 ACCESSORIES Page: 263 Page: 264 IF SOMEONE COPIED ME TODAY, TOMORROW HE WOULD BE OBSOLETE BECAUSE I WOULD HAVE ALREADY REINVENTED MYSELF. ANONYMOUS Page: 265 Page: 266 ACCESSORIES ÍNDICE Box fastening
PNCE ELECTRIC CYLINDERS
ELECTRIC CYLINDERS Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
Machine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
Adjustable Series Hydraulic Shock Absorbers OEM Series. Adjustable Series OEM XT. Overview. Features and Benefits
XT Hydraulic Shock Absorbers Series Overview Xtreme Mid-Bore Series Large Series Small Bore Platinum Series Enidine Adjustable Hydraulic Series shock absorbers offer the most flexible solutions to energy
ARI-FABA -Plus Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus - Straight through with flanges DIN DVGW-Type approval TA - Luft TÜV-Test-No. 973-10183778
Turcon Glyd Ring. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Turcon Glyd Ring Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 15 Turcon Glyd Ring 16 Turcon Glyd Ring Turcon Glyd Ring Description Successfully used for decades,
Tooth thickness Dedendum. Addendum. Centre distance Nominal
FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)
For new perspectives. WPLE - line WPLE
54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox
Precision ball screws
Precision ball screws Danaher Motion - Helping you build a better machine, faster The Danaher Corporation has brought together more than 30 market-leading brands (including Kollmorgen, Thomson, Dover,
Geared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
Precision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
Compact Modules CKK/CKR 9-70
Compact Modules CKK/CKR 9-70 (with Ball Rail System, Ball Screw Drive or Toothed Belt Drive) R310EN 2624 (2008.10) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball
ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat
ARI-STOBU PN16-40 Stuffing box valve Stop valve with gland seal metal seat Straight through with flanges TRB 801 Annex II No. 45 (except EN-JL1040) (optional) Straight through with flanges TRB 801 Annex
Main Catalogue. EichenbergerGewinde. 100 % Swiss made
EichenbergerGewinde 100 % Swiss made Main Catalogue Carry ball screws Carry Speed-line high-helix ball screws Speedy high-helix lead screws Rondo round thread lead screws The choice is yours Thread rolling
POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
COMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09
COMBIBOX clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... COMBIBOX 10 with an energised to engage single sided clutch without brake... COMBIBOX 09 with an
Tandler. Hypoid. Servo Gearheads
Tandler Hypoid Servo Gearheads ServoFoxx Hypoid Gearboxes The new Hypoid gearbox from Tandler offers the ultimate in performance and connection versatility for dynamic servo driven applications. Benefits:
Geared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
ANTI-VIBRATION Rotary Dampers - Continuous Rotation Bi-Directional : Ncm
FRTE Bi-Directional :.1 -. 2.1 2.5 2. 1 ±.5 2 ±.5 Ø Ø7.2 Ø2.5 ±.5 Ø2.1 (5.5 without gear) torque.7..5...2.1 FRTE2 (at 2 C) 2 Model 2 5 Rpm torque.5...2.1 FRTE2 (at 2 Rpm) 2 5 C Model 2 torque varies with
Main Catalogue. EichenbergerGewinde
EichenbergerGewinde Main Catalogue Carry ball screws Carry Speed-line high-helix ball screws Speedy high-helix lead screws Rondo round thread lead screws The choice is yours Thread rolling is the core
6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
The CSF-mini series now includes Ultra Flat models with High-Moment Stiffness
New Product News Vol. 22 Toll Free Speed Phone (877) SERVO98 Sensor Toll Reducer Free Fax (877) SERV99 Controller Motor Other System Elements Driver The CSF-mini series now includes Ultra Flat models with
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
L Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
Cam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
ISO2858 END SUCTION PUMPS TECHNICAL DATA
CENTRIFUGAL PUMP PUMP X F Ø OUTLET A L Ø INLET H2 Standard Flange Drilling to AS2129-1982 Table E. Other drilling options available on request. D T2 T1 H1 Dimensions in millimetres. Pump Size Inlet Outlet
Technical Features. 20 Thompson Rd East Windsor CT Fax
Technical Features 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com THE TSUDAKOMA DUAL LEAD GEARING SYSTEM THE TSUDAKOMA DUAL LEAD GEARING
Main Catalogue. EichenbergerGewinde. 100 % Swiss made
EichenbergerGewinde 100 % Swiss made Main Catalogue Carry ball screws Carry Speed-line high-helix ball screws Speedy high-helix lead screws Summary description ball screws Due to their premium quality
Performances. Heavy duty, planetary to bevel, right-angle, servo gearbox. Up to 350 Nm rated 9
Up to 350 Nm rated 9 Mra line Heavy duty, planetary to bevel, right-angle, servo gearbox Backlash: from 15 to 5 minutes* Hollow shaft, double shaft or quadri-shaft versions available Efficiency: from 91%
Applications for Linear-Roundrail- Technology-Products:
Linear-Technology Applications for Linear-Roundrail- Technology-Products: food industry printing machines packaging machines medical industry optical scanner robots textile industry semiconductor industry
V Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio
Load Cell Accessories
Force Pressure Temperature Switch Load Cell Accessories Force Introduction modules and mounting devices Description The mounting of load cells in an application requires high diligence if the force measuring
MHD heavy duty track roller guidance system
HepcoMotion MHD heavy duty track roller guidance system System Composition The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly suitable for moving
Tubular Screw Conveyor Capacity: Objectives:
T Tubular Screw Conveyor Capacity: Objectives: I Manufacturing: Helical blades welded onto the central tube Inlet/outlet opening: Maximum slope: Engine: Length: ATEX zone 20/22 Power: Transmission type:
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
drylin linear technology drylin shafts
linear technology ard anodised aluminium for optimum running performances Stainless steel for high corrosion resistance ardened steel and stainless steel Carbon fibre Round with and without support Advantages
Immersion Pumps PMS and PMS-T sealless
Immersion Pumps PMS and PMS-T sealless 1-6033-EN Centrifugal pumps of metal with high resistance to wear for diverse industrial fluids Technical data Delivery rate Q max = 400 l/min Delivery head H max
Low profile slides type RTS
Low profile slides type RTS TECHNISCHE DATEN ASSEMBLY The mounting holes of each type are drilled to a standard configuration in slide-top and -base and permit the user a quick attachment into the application.
The new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A