Gear Clamps and Accessories
|
|
- Penelope Mason
- 5 years ago
- Views:
Transcription
1 Gear Clamps and Accessories
2
3
4 Section Contents Shafts Ground Stock...Page 11 2 Shaft Retaining Collars...Page 11 3 Gear Clamps...Page 11 4 Gear Clamps ow Inertia...Page 11 5 Gear and Dial Hubs Pin Type...Page 11 6 Gear and Dial Hubs Clamp Type...Page 11 7 Gear Clamps and Accessories 11
5 Shafts Ground Stock All dimensions in mm General tolerances ±0.13 mm Material: Stainless steel 303 series Straightness: mm/mm Surface finish: 0.25 µm Associated Products Shaft collars: page 11 3 Bearings: page 12 2 Couplings: page 8 1 Cut to ength Machined to ength number selection table Cut to length ength Basic Basic SM1 3 SM1 3A SM1 4 SM1 4A SM1 5A SM1 6 SM1 6A SM1 8 SM1 8A SM1 10 SM1 10A SM1 12 SM1 12A To complete the part number add length details to part number eg SM ength 600 1,000 Gear Clamps & Accessories number selection table Machined to length Basic Available engths ength ength Code ength ength Code SM2 3 SM2 4 SM2 6 SM2 8 SM2 10 SM To complete the part number add length details to part number eg SM Product options ength ength Code Standard shaft end modifications, similar to those on leadscrews, are available see page 7 27 Imperial sizes available 11 2 Contact us for product information, design support and custom solutions sales@reliance.co.uk +44 (0)
6 Shaft Retaining Collars Associated Products Hubless gears: page 4 52 Hubless brass gears: page 4 78 Shafts: page 11 2 Bearings: page 12 2 All dimensions in mm General tolerances ±0.13 mm Material: Stainless steel 303S31 or 303S21 number selection table CSM 2 CSM 3 CSM 4 CSM 5 CSM 6 CSM 8 CSM 10 CSM 12 Bore ength Outer Dia ØA Shoulder Dia ØC Sub drill Set Screw Supplied SS M1.6 2 SS M2 2 SS M2 2 SS M3 3 SS M3 3 SS M4 4 SS M5 4 SS M6 6 Product options Imperial sizes available Gear Clamps & Accessories Contact us for product information, design support and custom solutions sales@reliance.co.uk +44 (0)
7 Gear Clamps All dimensions in mm General tolerances ±0.13 mm Material: Stainless steel, 303S21 Associated Products Clamp hub gears: from page 4 36 Anti backlash gears: from page 4 22 number selection table Gear Clamps & Accessories To Suit Gear of Bore Dia Bore CGM CGM CGM CGM CGM CGM Outer Dia ØA Width W Head Dia ØE (max) Clearance Radius C Screw Supplied T Screw Offset M Subdrill * 8.7 M M3 7.5 CGM M4 9.5 CGM * Socket head on these components is narrower than the clamp 4.0 Product options Imperial sizes available 11 4 Contact us for product information, design support and custom solutions sales@reliance.co.uk +44 (0)
8 Gear Clamps ow Inertia Associated Products Clamp hub gears: from page 4 36 Anti backlash gears: from page 4 22 Anti backlash pinions: page 4 7 All dimensions in mm General tolerances ±0.13 mm Material: Aluminium alloy, EN AW 2014 T6511 or 168 Finish: Chromic acid anodise to DEF STAN number selection table To Suit Gear of Bore Dia Bore Outer Dia ØA Width W Clearance Radius C Screw Supplied T Screw Offset M CGAM 2A M2 CGAM 3A CGAM 4A CGAM 5A M3 5.5 CGAM 6A CGAM 8A CGAM 10A M4 8.5 CGAM 12A Gear Clamps & Accessories Product options Imperial sizes available Contact us for product information, design support and custom solutions sales@reliance.co.uk +44 (0)
9 Gear and Dial Hubs Pin Type All dimensions in mm General tolerances ±0.13 mm Material: Stainless steel Associated Products Hubless gears: page 4 52 Hubless brass gears: page 4 78 number selection table Dial hubs PHMD 1 PHMD 3 PHMD 5 Bore 4.0 Face F 1.57 ength Outer Mount ØC Sub drill ØP Distance E 2.8 Set Screw Supplied T SS M2 2 SS M2 2 SS M3 3 Gear Clamps & Accessories number selection table Gear hubs Bore Face ength Outer PHM1 1 PHM1 2 PHM1 3 PHM1 4 PHM1 5 PHM1 6 PHM1 7 PHM1 8 PHM1 9 PHM1 10 PHM F Mount ØC Sub drill ØP Distance E Set Screw Supplied T 0.75 SS M SS M SS M SS M SS M5 5 Features and options Gears, sprockets or dials assembled on request Imperial bores available Special hubs for Delrin gears Technical support Recommended assembly procedure: Notch and stake in 4 equi spaced positions and/or use adhesive (octite grade 326) 11 6 Contact us for product information, design support and custom solutions sales@reliance.co.uk +44 (0)
10 Gear and Dial Hubs Clamp Type Associated Products Hubless gears: page 4 52 Hubless brass gears: page 4 78 All dimensions in mm General tolerances ±0.13 mm Material: Stainless steel number selection table Dial hubs Bore Face ength CHMD 1 CHMD 3 CHMD F Outer 20.0 Mount ØC 9.52 Hub ØH Shoulder S 1.0 To Suit Clamp CGM1 3 CGM1 4 CGM1 6 number selection table Gear hubs Bore Face ength Outer CHM1 1 CHM1 2 CHM1 3 CHM1 4 CHM1 5 CHM1 6 CHM1 7 CHM1 8 CHM1 9 CHM1 10 CHM F Mount ØC Hub ØH Shoulder S To Suit Clamp CGM CGM CGM CGM CGM1 10 Gear Clamps & Accessories Features and options Gears, sprockets or dials assembled on request Imperial bores available Special hubs for Delrin gears Technical support Recommended assembly procedure: Notch and stake in 4 equi spaced positions and/or use adhesive (octite grade 326) Contact us for product information, design support and custom solutions sales@reliance.co.uk +44 (0)
11
12 RG36 Issue A2
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS Table of Contents HUBS Gear, Dial and Sprocket Assembies - Tech Info.....MI 2 Phase Adjustable Hub........................MI 3 Quick-2-Lock Hub..........................MI
More informationCOUPLINGS AND CLUTCHES
COUPLINGS AND CLUTCHES COUPLINGS Six Beam Flexible.... MG 2 - MG 7 Three Beam Flexible.... MG 8 - MG 11 Single Beam Flexible.... MG 12 - MG 13 Reli-A-Flex.... MG 14 - MG 17 Flex-Thane Couplings.... MG
More informationhttps://amironic.co.il/ COUPLINGS Oldham Lateral Offset Coupling Set Screw Fixing : Blind Hub : Nm : 2-20mm Bores
BG COUPINGS Oldham ateral Coupling Set Screw Fixing : Blind : 0.7-57 : - 0 Bores ØA BG BG9 BG3 BG9 BG5 BG33 BG33S BG BG BG9 BG3 BG9 BG5 BG33 BG33S BG 0 0 0 0.00 Deg/ 5.700.900 0.0 0.0 0.0 /rad 0 30 5 5
More informationHardened & Ground Linear Shafts
56 Hardened & Ground Linear Shafts Hardness: Carbon Steel 61-66 Rockwell C Corrosion Resistant Steel 54-56 Rockwell C Tolerance: h6 standard, special tolerances upon request Finish: Ground and polished
More informationBearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
More informationCouplings and Collars
Couplings and Collars Selection Guide The couplings featured in this catalogue have been carefully selected to accoodate varying degrees of shaft misalignment whilst offering minimum distortion of rotation.
More informationGeneral Purpose Motion Control Couplings
General Purpose Motion Control s Sliding Disc (Oldham) Universal ateral (Uni-at) Backlash-free up to 10 8 turns Can tolerate large misalignments Slight damping characteristics Flex-free mechanical action
More informationDF 15. DIFFERENTIAL 1GR-FE FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD) REMOVAL
DIFFERENTIAL 1GR-FE FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD) 15 REMOVAL 1. REMOVE FRONT WHEELS 2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY (a) Remove the 6 bolts and engine under cover assembly. 3.
More informationDear Colleague, Please give us a call and let us know how we can assist you. We look forward to talking to you soon. Thank you.
Dear Colleague, Thank you for visiting our website and downloading a product catalog from the R.. Hoffman Company. We hope this information will be useful to you in solving the application you are working
More informationRigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
More informationBREADBOARD COMPONENTS
BREADBOARD COMPONENTS DIALS Drum Dials.... MD 2 - MD 3 Flat Dials.... MD 4 Engraved Flat Disks............................. MD 5 Flat Dial Index.... MD 6 Drum Dial Index.... MD 6 Engraved Index.... MD
More informationLeadscrews and Leadscrew Assemblies
Leadscrews and Leadscrew Assemblies Section Contents Leadscrew and Assemblies Product Overview...Page 7 2 Selection Guide...Page 7 6 Leadscrew Sizes...Page 7 7 Leadscrew s...page 7 12 Modified and Custom
More informationPOWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS
Section 4 POWERGRIP 5MGT & POLY CHAIN 5MGT SPROCKETS Use with 5mm PowerGrip GT or Poly Chain GT belts. 2MGT and 3MGT pulleys available on request, please contact Gates customer service. Identification
More informationSHAFT FIXINGS SHAFT FIXINGS
Shaft Fixings Design Data Required Shaft dimensions diameter and tolerance length Keyway details if present Torque to be transmitted Product hub details diameter length material (strength) Special considerations
More informationCHM and CHMR gear gearboxes CHM
CHM and CHMR gear gearboes CHM Technical information CHMR.Maimum output. When used with a double output shaft, the total of the combined s should not eceed the values given in the table below Loads are
More informationASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
More informationTROUBLESHOOTING SPECIAL TOOL ASSEMBLY AND ADJUSTMENT
1 INDEX Models FD, FE, FF and SG REAR AXLE 10-1 10-108E-07 CHAPTER 10 REAR AXLE Models FD, FE, FF and SG TROUBLESHOOTING...10-2 10 SPECIAL TOOL...10-3 WHEEL HUB AND RELATED PARTS DISASSEMBLY...10-7 INSPECTION...10-9
More informationDouble Edge Ring Slides & Segments
Double Edge Ring Slides & Segments www. HepcoMotion.com 9 HepcoMotion double edge ring slides are manufactured from high quality steel, zone hardened on the V edges and precision ground all over with datum
More informationOVERLOAD CLUTCHES FOR INDEX DRIVES
The Driving Force in Automation OVERLOAD CLUTCHES FOR INDEX DRIVES WARNING WARNING This is a controlled document. It is your responsibility to deliver this information to the end user of the CAMCO indexer.
More informationDrive pinion and ring gear, adjusting
Page 1 of 8 39-33 Drive pinion and ring gear, adjusting Note: Careful adjustment of the drive pinion and ring gear is important for the service life and smooth running of the final drive. For this reason,
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationMAXITORQ ELECTRICALLY ACTUATED CLUTCHES AND BRAKES
MAXITORQ ELECTRICALLY ACTUATED CLUTCHES AND BRAKES HOW TO SELECT THE CORRECT CLUTCH OR BRAKE The easiest way is to ask our application engineers. For clutch application, we need to know: Torque or H.P.
More informationShaft Couplings & Universal Joints. Lenze. ideas in motion
Shaft Couplings & Universal Joints Lenze ideas in motion Shaft couplings & universal joints the extensive range from Lenze Ltd Universal joints Shaft sizes 10 to 50mm page 7-11 Suitable for angles up to
More informationGauging Systems Inc. REBUILDING THE GSI 2570 PLANE JANE GAUGE
Gauging Systems Inc. REBUILDING THE GSI 2570 PLANE JANE GAUGE TABLE OF CONTENTS Disassembling The Gauge...1 Replacing The Brass Bushings In The Gland...1 Installing The Inch Dial Shaft and Counter Assembly...3
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
More informationTel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump
More informationPulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
More informationHighest Precision: Dyna Series
GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested modifications to give you
More informationTri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
More informationTITAN STEERING RACK ASSEMBLIES
TITAN STEERING RACK ASSEMBLIES NOTE: All prices are SUBJECT TO CHANGE and freight is NOT INCLUDED. All Titan rack and pinion assemblies are available with one of two different tooth forms. These are identified
More informationLOCKING BUSHES & SHAFT COLLARS
LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)
More informationSolutions In Motion SM. Power Transmission Group. Universal Driveshaft Technology for Heavy Duty Industrial Applications
Solutions In Motion SM Power Transmission Group Universal Driveshaft Technology for Heavy Duty Industrial Applications Universal Driveshaft Technology for Heavy Duty Industrial Applications Our Experience
More informationD9 & D9G Crawler S/n 66A1 to 66A3265
Caterpillar Service Manual D9 & D9G Crawler S/n 66A to 66A65 Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF CATERPILLAR OR IT S SUCCESSORS. CATERPILLAR AND IT S
More informationHigh performance metal disk coupling SERVOFLEX SFF (N)
High performance metal disk coupling SERVOFLEX SFF (N) Best design for the latest servo motor SERVOFLEX for feed shaft which introduce the high precision clamp method Coupling outer diameter, lineup for
More informationPSI Series Features: Trouble-free design for long life. Simple mechanical actuation
CROSSOVER DRIVES Wrap Spring Clutches Ideal for Overrunning, Start- Stop, and Single Revolution Applications The Crossover Drives clutches are the basic form of wrap spring clutch design. For start-stop
More informationIN-VEHICLE REPAIR. Differential Bearings. Rear Drive Axle/Differential Ford 7.5-Inch Ring Gear. Special Tool(s)
205-02A-1 IN-VEHICLE REPAIR Differential Bearings Special Tool(s) Protector, Drive Pinion Thread 205-460 Special Tool(s) Installer, Differential Shim 205-220 (T85L-4067-AH) 205-02A-1 2-Jaw Puller 205-D072
More informationCOMPONENTS REAR DIFFERENTIAL COMPONENTS
COMPONENTS REAR DIFFERENTIAL COMPONENTS REMOVAL 1. Drain the differential gear oil. 2. Remove the rear disk brake. 3. Remove the parking brake and cable. 4. Remove the stabilizer bar. 5. Pull out the
More informationHBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationFUNCTION OF A BEARING
Bearing FUNCTION OF A BEARING The main function of a rotating shaft is to transmit power from one end of the line to the other. It needs a good support to ensure stability and frictionless rotation. The
More informationPOLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded
More informationLength: L. Outer Dia. : D. Bore 2: d2. Bore 1: d1. BF Series
Page 1 BF Jaw Coupling Surface Finish Available Body Sleeve Body Sleeve Aluminium Alloy Polyurethane Anodic oxidation None Clamp Screw Coupling assembled by pressing a polyurethane sleeve into hubs on
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationA Resource for Semiconductor Manufacturers Illustrated Parts Guide for Axcelis GSD 200E² 160V
Illustrated Parts Guide for Axcelis GSD 00E² 0V GSD Water Cooled & Non-Water Cooled Bushing and Liner Flange Upgrades Pgs. - Source Body Components Non-Vaporizer / Vaporizer Pgs. -0 Extraction Electrode
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More informationPneu-Turn Rotary Actuators
Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationData Sheet. Rotary actuators. RS stock numbers to Actual torque. Data Pack G. Actuator 10mm bore. Technical specification
Data Pack G Issued March 1997 3-3939 Data Sheet s RS stock numbers 76-36 to 76-93 ctual torque ctuator 10mm bore ctual torque kgf-cm 1.5 1 0.5 Technical specification 10mm 0mm 30mm ctuator dia. dia. dia.
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationSYSTEM COMPONENTS COUPLINGS & DRIVE SHAFTS
SYSTEM COMPONENTS COUPINS & DRIVE SHAFTS 2 Couplings & Drive Shafts FU RANE OF COUPIN AND DRIVE SHAFTS SO YOU CAN BUID COMPETE JACKIN SYSTEMS. C & E-Series Screw Jacks Company Overview Capability 1 3 OUR
More informationRFC SPECIALTY LOCKING DEVICES
RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142
More information1994 Mitsubishi Eclipse GS
APPLICATIONS CHRYSLER MOTORS MANUAL TRANS OVERHAUL - MITSUBISHI W5M & W6M SERIES MANUAL TRANSMISSIONS Mitsubishi W5M31, TRANSMISSION APPLICATIONS (CHRYSLER MOTORS) Vehicle Application Transmission Model
More informationAlignment Spec. Power Rack & Pinion: 5 degrees positive Camber 0 degrees Toe-In 1/32
333-TCIE237 1967-1969 Chevy Camaro Front Suspension 1968-1972 Chevy Nova Front Suspension 1967-1969 Pontiac Firebird Front Suspension 1-800-984-6259 www.totalcostinvolved.com 1967-1969 Chevy Camaro Front
More informationCHAPTER 7 FRONT AXLE
CHAPTER 7 FRONT AXLE 1. STRUCTURE FRONT AXLE 1.1 FRONT AXLE STRUCTURE 704W701A (1) Front Bracket (2) Rear Bracket (3) Center Pin (4) Front Axle Support (5) Bevel Gear Case (6) Front Axle Case (7) Front
More informationCompact 6-Speed and Reverse Gearbox
Compact 6-Speed and Reverse Gearbox By Alan Wenbourne Downloaded from the South East London Meccano Club Website www.selmec.org.uk The Gearbox During the construction of my demonstration Direct Shift Gearbox
More informationWEIGHT. Reduction ratio 2:1 3:1 4:1 5:1 6:1 7:1. Max Input Speed
OFFSET SPUR GEAR REDUCERS HPCFF10 ø15 HPCFF10 HPCFF10-2 2:1 93 2000 1000 1.55 125.88 HPCFF10-3 3:1 93 2000 666 1.49 125.88 HPCFF10-4 4:1 93 2000 500 1.33 125.88 HPCFF10-5 5:1 93 2000 400 1.27 125.88 HPCFF10-6
More informationKAM Ring and Pinion fitting instructions (Mechanical knowledge necessary, these instructions are intended as a guide)
KAM Ring and Pinion fitting instructions (Mechanical knowledge necessary, these instructions are intended as a guide) DISMANTLE It is essential that differential components are marked in their original
More informationRepairs after which the ring gear must be adjusted Page Drift VW 295
Page 1 of 15 39-52 Ring gear, adjusting (Adjusting differential) Repairs after which the ring gear must be adjusted Page 39-37. Special tools, testers and auxiliary items Drift VW 295 Dial gauge extension
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationDF 47 DIFFERENTIAL REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL
47 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE REAR WHEEL 3. DRAIN BRAKE FLUID Immediately wash off any brake fluid that comes into contact with any painted surfaces. 4. DRAIN
More informationCharacteristics. No. of Stages 1-stage 2-stages 3-stages Ratio (1) Dimensions [inch]
MEDIUM BACKLASH PLANETARY GEARHEADS MNA 017 No. of Stages 1-stage 2-stages 3-stages Ratio (1) 4 14 25 51 93 169 Rated speed / Max. speed Rpm 3 000 / 4000 Power in @ T1 & N1 rated W 72,3 66 37,7 40,8 22
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationAmarillo PUMP DRIVES (250 HP THROUGH 350 HP) INSTRUCTIONS FOR REPAIRING MODELS 250, 300, and 350
Amarillo PUMP DRIVES (250 HP THROUGH 350 HP) INSTRUCTIONS FOR REPAIRING MODELS 250, 300, and 350 Amarillo Right Angle Pump Drives, if properly installed and maintained, should provide years of service
More informationTaper Bore Sprockets. Sprockets. 06B 3/8" x 7/32" BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3
Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 06B 3/8" x 7/32" SPROCKET mm CHIN mm Tooth Radius 10.0 Pith 9.525 Chamfer 1.0 Width Between Inner Plates 5.720 Tooth Width b1 5.2 Roller Diameter 6.350
More informationBTS Accessories. Floor Spring Accessories
BTS Accessories Floor Spring Accessories Floor spring accessories Single action aluminium doors For single action aluminium doors Aluminium door straps 2 For flush-closing single action aluminium doors
More informationFLANGES FLANGES.
FANGES FANGES 26 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200,
More informationAssortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
More information< INTRODUCE BONDED SEALS >
< INTRODUCE BONDED SEALS > ORIGINAL TYPE: The bonded seal was originally designed to replace copper type washers in higher pressure systems. Simple in construction the gasket comprises a metal annulus,
More informationAUTOFLEX DISC COUPLINGS
AUTOFLEX DISC COUPLINGS Contents & Coupling Application Configurations Coupling Type Typical Application Series Page No Introduction - Disc Configuration 2 Coupling Selection 3 & 4 Service Factors High
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationService Manual. 555 Motor Grader
Wabco Service Manual 555 Motor Grader Service Manual THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF WABCO OR IT S SUCCESSORS. WABCO AND IT S SUCCESSORS ARE NOT RESPONSIBLE FOR
More informationPNEUMATIC ACTUATOR FIG. PD - PE
FIG. PD - PE New design (El-O-Matic type F) Single acting type PE (+ PD up to 100) Available from size12 up to 600 Double acting type PD Available in size 150 up to 600 Old design (El-O-Matic type E) Single
More informationLotus Europa S1/S2 Parts Manual - Section CA - Suspension - Front - Page 1
Lotus Europa S1/S2 Parts Manual - Section CA - Suspension - Front - Page 1 Lotus Europa S1/S2 Parts Manual - Section CA - Suspension - Front - Page 2 Item Lotus # Description Change Point Notes Bulletin
More informationBALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
More information1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
More informationDF 43 DIFFERENTIAL REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL
DIFFERENTIAL REAR DIFFERENTIAL CARRIER ASSEMBLY 43 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE REAR WHEEL 3. DRAIN BRAKE FLUID 4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (See page
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationHIGH PERFORMANCE TRANSMISSION PARTS Instructions. Line Pressure Booster Kit. TCC Control Plunger Valve Kit. Line Pressure Modulator Plunger Valve Kit
Performance Pack Ford 4R100 Part No. HP-4R100-01 Line Pressure Booster Kit Line-to-Lube Pressure Regulator Valve Line Pressure Booster Kit Valve Sleeve O-Rings (2) TCC Control Plunger Valve Kit Front Lube/Drainback
More informationRINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 1 Ringfeder Corporation Catalog W-300-1 Shaft-Hub Locking Devices Ringfeder unique frictional, keyless
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationDifferential Bearings
SECTION 205-02A: Rear Drive Axle/Differential Ford 7.5-Inch Ring Gear 2009 Mustang Workshop Manual IN-VEHICLE REPAIR Procedure revision date: 04/02/2009 Differential Bearings Special Tool(s) 2 Jaw Puller
More informationDifferential Bearings
SECTION 205-02B: Rear Drive Axle/Differential Ford 8.8-Inch Ring Gear 2009 Mustang Workshop Manual IN-VEHICLE REPAIR Procedure revision date: 01/06/2010 Differential Bearings Special Tool(s) 2 Jaw Puller
More informationZoom and Print Options
1 of 63 8/26/2017, 7:04 AM Vehicle» Transmission and Drivetrain» Transfer Case» Service and Repair» Procedures» Isuzu T150» Overhaul (Unit Repair)» 1. Transfer Case Disassemble Transfer Case Disassemble
More informationREAR AXLE Click on the applicable bookmark to selected the required model year
REAR AXLE 27-2 REAR AXLE General Information GENERAL INFORMATION 27100010118 The rear axle is a banjo-type semi-floating type. The axle shaft bearings are: *Single taper bearings for vehicles without
More informationCHECK ALL PARTS INCLUDED IN THIS KIT TO THE PARTS LIST BEFORE INSTALLATION. IF ANY PIECES ARE MISSING, PLEASE CONTACT: TOTAL COST INVOLVED
333-TCIE237 1967-1969 Chevy Camaro Front End, 1968-1972 Chevy Nova Front End 1967-1969 Pontiac Firebird Front End Suspension Installation Instructions 1-855-693-1259 www.totalcostinvolved.com CHECK ALL
More informationForged Chains & Sprockets
GROUP Forged Chains & Sprockets for the toughest applications Forged Chain Links & Pins Bolt n Go Chain & Flight System Sprockets Trailers Accessories DROP FORGED CHAIN s drop forged chain is made of special
More informationCSG Series Fully Enclosed, Sealed Housing
New Product News Vol.19 Sensor Controller Other System Elements Speed Reducer Driver Motor CSG Series Fully Enclosed, Sealed Housing Harmonic Drive CSG high torque speed reducer is now available with a
More informationGEARBOXES (Including motor) (This list indicates ex-stock ratios) MOTORS WITH BRACKETS.
PRICE LIST STOCK MINIATURE LOW D.C. MOTORS & GEARBOX UNITS BATTERIES & CHARGERS. GEARBOXES (Including motor) (This list indicates ex-stock ratios) 917D 4.25 ea. 917D/A 5.95 ea. 918D151 8.47 ea. 918D151/1
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to
More informationSKF Flex Coupling Installation Instructions
SKF Flex Coupling Installation Instructions The performance of the coupling depends largely upon how you install and maintain. 1. Thoroughly clean all components, paying particular attention to the removal
More informationNew look for the Monaco Kart Range
New look for the Monaco Kart Range New adjustable Heel Support on CIK, KZ, DD2, Junior, Cadet / Rookie Self-Adjusting brakes, standard on CIK, KZ, DD2, & Cadet/Rookie. Optional on 28C Black Anodised 6
More informationBearing retention and clearances
Bearing retention and clearances Bearing retention 9 Radial retention 9 Axial retention 91 Positioning of single bearing assemblies 91 Positioning of two bearing assemblies 92 Axial retention processes
More informationMechanical components by mail order. innovations. & new products PDF. 0,15
Mechanical components by mail order innovations & new products 201 5 PDF 0,15 www.hpceurope.com Image index 1/3 Detector support assembly Thread blocking clamp Stainless steel Right angled support clamp
More informationDART. Small Block - Technical Notes. Deck Height Bore Main Bearing Size (2.45) 400 (2.65) Weight...
DART Small Block - Technical Notes Deck Height... 9.025 9.325 Bore... 4.000 4.125 Main Bearing Size... 350 (2.45) 400 (2.65) Weight... 210 lbs Largest Recommended Bore..... 4.185 Largest Recommended Crank
More informationTURBO DRIVE INSTALLATION MODEL 9808T KNEE FEED Kent, Kingston KTM 3V & Webb Mills
TURBO DRIVE INSTALLATION MODEL 9808T KNEE FEED Kent, Kingston KTM 3V & Webb Mills NOTE This Turbo Drive Knee Feed is configured for mounting the feed on the front of the knee with the keypad facing left.
More informationHIGH PERFORMANCE TRANSMISSION PARTS Instructions. Line Pressure Booster Kit. TCC Control Plunger Valve Kit. Line Pressure Modulator Plunger Valve Kit
Performance Pack Ford 4R100 Part No. HP-4R100-01 Line Pressure Booster Kit Line-to-Lube Pressure Regulator Valve Line Pressure Booster Kit Valve Sleeve O-Rings (2) TCC Control Plunger Valve Kit Front Lube/Drainback
More information4-50 BRAKES AND STEERING CLUTCHES
4-50 BRAKES AND STEERING CLUTCHES Disassembly of bevel gear crown WARNING Lift and handle all heavy items with a hoist of appropriate capacity. Make sure that all parts are held by appropriate slings and
More informationMECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
More information