BGA Heat Sinks PCB Hole Patterns

Transcription

1 BGA eat Sinks PB ole Patterns Aavid Thermalloy s innovative BGA heat sinks include standard solutions to support the most demanding applications. Features: Flat base ight weight ong-term reliability Fig. 1 Fig Fig. 3 Fig. 4 Fig (35.56) (48.26) Ø (3.10) Ø 0.12 (3.10) Ø.038 (0.97) 1.05 (26.67) 2.10 (53.34).700 (17.78) 2x:.200 (5.08) Ø.038 (0.97).950 (24.13) 1.30 (33.02) 2.60 (66.04) 2x:.200 (5.08) 1.31 (33.38).657 (16.69) 1.28 (32.53) 1.83 (46.6).640 (16.46).822 (20.87) 2.32 (59.0) 1.64 (41.74).822 (20.87) 1.64 (41.74).788 (20.02).394 (10.01) Ø (3.10) 2.00 (50.80) 1.00 (25.40) Solder Anchor Attachment Method New unique wire clip design allows for complete reworkability after assembly without damage to the BGA package or P Board Minimal P Board real estate is required for mounting Solder Anchors provide the most rugged mounting in the industry Each eat Sink utilizes a phase change pad as the interface for optimal thermal performance Push Pin Attachment Method All eat Sinks utilize industry standard hole patterns Plastic push pins are standard. onsult Aavid Thermalloy for versions available with brass push pins for more rugged applications Minimal diameter holes are necessary for mounting to P Board Solder Anchors Sold Separately Therm. Therm. Digi-Key Price Each Aavid Fig. idth ength eight Res. Nat. Res. Forced Part No Part No S329-ND B60023G S330-ND B60023G S326-ND B60024G S331-ND B60024G S327-ND B60024G S328-ND B60024G S332-ND B60024G Solder Anchor... S400-ND D00000G Solder anchors must be soldered to the PB prior to attaching the heat sink clip. Natural convection thermal resistance based on a 75 heat sink temperature rise. Therm. Therm. Digi-Key Price Each Aavid Fig. idth ength eight Res. Nat. Res. Forced Part No Part No S306-ND REV B-G S308-ND M02000G S307-ND B-11G Natural convection thermal resistance based on a 75 heat sink temperature rise. Finish: Green Anodize lip Attachment Method A unique clip eliminates the need for mounting holes in the P Board Each eat Sink utilizes a Phase hange Pad as the interface for optimal thermal performance The clips unique design eliminates the need for thermal tape attachment Therm. Therm. Digi-Key Price Each Aavid idth ength eight Res. Nat. Res. Forced Part No Part No S309-ND B-EP11-BGS5G S310-ND B-EP04-BGS5G Natural convection thermal resistance based on a 75 heat sink temperature rise. RoS ompliant Tape Attachment Method Tape mounted versions eliminate the need for mounting holes in the P Board These eat Sinks can be used with either plastic or metal/ceramic BGA Packages These eat Sinks are compatible with Ther-a-grip Tapes Therm. Therm. Tape Res. Res. Digi-Key Price Each Aavid Surface idth ength eight Nat. Forced Part No Part No. Plastic S316-ND B00035G Plastic S317-ND B00035G Plastic S318-ND B00035G Plastic S319-ND B00035G Plastic S390-ND B00034G Metal S313-ND B00032 Metal S392-ND B00032G Plastic S393-ND B00034G Metal S320-ND B00032 Metal S395-ND B00032G Plastic S321-ND B00035G Metal S322-ND B00032 Metal S396-ND B00032G Plastic S323-ND B00035G Metal S315-ND M00032 Metal S394-ND M00032G Metal S397-ND B00032G Metal S398-ND B00032G Metal S312-ND B00032 Metal S391-ND B00032G Natural convection thermal resistance based on a 75 heat sink temperature rise. Finish: Green Anodize RoS ompliant PGS is a thermal interface material which is very thin, synthetically made, has high thermal conductivity, and is made from a highly oriented graphite polymer film. It is ideal for providing thermal management/heat-sinking in limited spaces or to provide supplemental heat-sinking in addition to conventional means. This material is flexible and can be cut into customizable shapes. Features: Excellent Thermal onductivity (2 ~ 4 times as high as copper, 3 ~ 6 times as high as aluminum) ightweight: Specific Gravity: 0.85 ~ 2.1 g/cm3 (1/4 ~ 1/10 of copper, 1/1.3 ~ 1/3 of aluminum in density) Flexible and easy to be cut or trimmed (withstands repeated bending) ow Application Examples: Notebook Ps, DVDs, DVs, Mobile Phones Semiconductor Manufacturing Equipment (Sputtering, Dry Etching, Steppers) Optical ommunications Equipment PGS (Pyrolytic Graphite Sheet) eat Sink Sheets haracteristics Specification Thickness 0.1±0.03mm 0.07±0.015mm 0.025±0.01mm Density 0.85 g/cm3 1.1 g/cm3 2.1 g/cm3 Thermal onductivity (a-b plane) 600 ~ 800 /(m.k) 750 ~ 950 /(m.k) 1500 ~ 1700 /(m.k) Electrical onductivity S/cm S/cm S/cm Expansion oefficient (a-b plane) 9.3 x /K Expansion oefficient (c axis) 3.2 x /K eat Resistance 400 Bending (angle, R5) cycles Dimensions x Digi-Key Price Panasonic (mm) Part No. Each Part No. 125 x 180 P11438-ND EYG-S x 90 P11439-ND EYG-S x 180 P13689-ND NE! EYG-S x 180 P13691-ND NE! EYG-S x 115 P12726-ND EYG-S x 115 P13688-ND NE! EYG-S x 115 P13690-ND NE! EYG-S x 90 P11440-ND EYG-S x 90 P12727-ND EYG-M060910SS 57 x 90 P12728-ND EYG-A060910P 57 x 90 P12729-ND EYG-A060910B ith Silicon ith Tape eat Sink Grease For fast heat transfer from components. Features: Nonflammable Noncorrosive Silicon ill not dry out, harden or melt 5 oz. tube Meets MI Stable from: -40 F ~ 392 F (-40 ~ 200 ) IT Digi-Key Price Each hemtronics Part No Part No. T40-5-ND T (N081)

2 NE! eat Sinks Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Fig. 27 Fig. 28 Dimensions mm Mounting Digi-Key Price Each omair-rotron Fig. Description x x Type Part No Part No. 1 TO-220/TO-262; Aluminum; 1.2mm thick with Black Anodized Finish, Integrated Spring 19.0 x 12.8 x Solderable Tab R467-ND B D2PAK/TO-263; opper, 0.6mm thick with Tin Plated Finish 12.7 x 26.2 x 9.9 SMT R471-ND T00000 DPAK/TO-252; opper, 0.6mm thick with Tin Plate Finish 22.9 x 8.0 x 10.2 SMT R496-ND T TO-220; Aluminum, 1.0mm thick with Black Anodized Finish 36.8 x 44.5 x 9.4 Device eads R493-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 12.7 x 13.2 x 19.1 Device eads R472-ND B TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 9.5 x 13.2 x 19.1 Device eads R475-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 9.5 x 19.0 x 19.0 Device eads R482-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 6.4 x 13.2 x 19.1 Solderable Device eads R488-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 12.7 x 13.2 x Solderable Tab R473-ND B TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 12.7 x 25.4 x Solderable Tabs R474-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 9.5 x 13.2 x Solderable Tab R477-ND B04000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 6.4 x 13.3 x Solderable Tab R489-ND B TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 9.5 x 13.2 x Solderable Tab R476-ND B TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 25.4 x 12.7 x Solderable Tabs R478-ND B TO-220; Aluminum, 1.2mm thick with Black Anodized Finish, Integrated Spring 25.4 x 12.7 x Solderable Tabs R479-ND B03453 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish, Integrated Spring 25.4 x 12.7 x Board ocking Tabs R480-ND B TO-220; Aluminum, 1.0mm thick with Black Anodized Finish 5.4 x 22.5 x Solderable Tabs R481-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 24.1 x 48.3 x Solderable Tabs R483-ND B TO-220; Aluminum, 1.2mm thick with Black Anodized Finish, Integrated Spring 11.9 x 33.0 x Solderable Tabs R500-ND B05300 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 9.7 x 44.5 x Solderable Tabs R503-ND B05300 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 24.1 x 48.3 x Solderable Tabs R507-ND B05300 TO-220; Aluminum, 0.8mm thick with Black Anodized Finish, Integrated Spring 10.0 x 21.2 x Solderable Tabs R484-ND B TO-220; Aluminum, 0.8mm thick with Black Anodized Finish, Integrated Spring 10.0 x 21.2 x Solderable Step Tabs R486-ND B03700 TO-220; Aluminum, 0.8mm thick with Black Anodized Finish, Integrated Spring 10.0 x 21.2 x Solderable Tabs R487-ND B TO-220; Aluminum, 0.8mm thick with Black Anodized Finish, Integrated Spring 10.0 x 21.2 x 19.0 Device eads R485-ND B TO-220; Aluminum, 1.0mm thick with Black Anodized Finish, Integrated Spring 9.5 x 22.8 x 17.8 Solderable Device eads R490-ND B TO-220; opper, 0.6mm thick with Tin Plate Finish, Integrated Spring 13.1 x 13.2 x 24.0 Solderable Device eads R491-ND T TO-220; Aluminum, 1.0mm thick with Black Anodized Finish 21.6 x 19.8 x 36.8 Solderable Device eads R492-ND B00000 TO-220; Aluminum, 1.2mm thick with Black Anodized Finish 12.7 x 25.4 x Mechanical Tabs R494-ND B TO-220; opper, 1.2mm thick with Black Paint Finish 12.7 x 25.4 x Solderable Tabs R497-ND BPT00000 TO-220; opper, 1.2mm thick with Tin Plate Finish 12.7 x 25.4 x Solderable Tabs R498-ND T TO-220; Aluminum, 1.0mm thick with Black Anodized Finish 17.8 x 44.5 x 9.5 Device eads R499-ND B TO-220; Aluminum, 1.0mm thick with Black Anodized Finish 17.8 x 44.5 x 12.7 Device eads R502-ND B00000 TO-220/TO-262; Aluminum, 1.2mm thick with Black Anodized Finish, Integrated Spring 12.7 x 12.8 x Solderable Tab R465-ND B00000 TO-220/TO-262; Aluminum; 1.2mm thick with Black Anodized Finish, Integrated Spring 12.7 x 12.8 x 19.0 Device eads R466-ND B TO-220/TO-262; Aluminum, 1.2mm thick with Black Anodized Finish, Integrated Spring 12.7 x 12.8 x Solderable Tab R468-ND B03900 TO-220/TO-262; Aluminum, 1.2mm thick with Black Anodized Finish, Integrated Spring 12.7 x 12.8 x Solderable Step Tab R469-ND B03700 TO-220/TO-262; Aluminum, 0.8mm thick with Black Anodized Finish, Integrated Spring 12.7 x 12.7 x Solderable Spring Tab R501-ND B DPAK/TO-263/SO-10/MO-184; opper, 0.6mm thick with Tin Plate Finish 15.0 x 25.9 x 9.5 SMT R504-ND T TO-220; opper, 0.6mm thick with Tin Plate Finish, Integrated Spring 9.5 x 22.0 x Solderable Tabs R506-ND T TO-220; Aluminum, 0.8mm thick with Black Anodized Finish, Integrated Spring 5.0 x 20.0 x 25.0 Device eads R508-ND B TO-218/TO-220/TO-247; Aluminum with Black Anodized Finish 12.7 x 34.9 x Solderable Pins R509-ND B02500 TO-218/TO-220/TO-247; Extruded Aluminum with Black Anodized Finish 25.0 x 41.6 x Solderable Pins R510-ND B TO-218/TO-220/TO-247; Extruded Aluminum with Black Anodized Finish 25.0 x 41.6 x Solderable Pins R511-ND B02500 TO-218/TO-220/TO-247; Extruded Aluminum with Black Anodized Finish 25.0 x 41.6 x Solderable Pins R512-ND B TO-202/TO-220; Extruded Aluminum with Black Anodized Finish 12.7 x 34.9 x Solderable Pins R513-ND B TO-202/TO-220; Extruded Aluminum with Black Anodized Finish 12.7 x 34.9 x Solderable Pins R514-ND B02500 TO-218/TO-220; Extruded Aluminum with Black Anodized Finish 16.0 x 16.5 x Solderable Pins R515-ND B TO-218/TO-220; Extruded Aluminum with Black Anodized Finish 16.0 x 16.5 x Solderable Pins R516-ND B02500 TO-218/TO-220; Extruded Aluminum with Black Anodized Finish 16.0 x 16.5 x Solderable Pins R517-ND B DPAK/TO-263; opper, 0.6mm thick with Tin Plate Finish 19.4 x 25.4 x 11.4 SMT R518-ND T00000 See data sheets for specifi c Board Mount See data sheets for specifi c omponent Mounting ole Patterns (N081) 1103

3 eat Sinks akefield Engineering is recognized as a worldwide leader in innovative thermal management solutions. Their products range from board level heat sinks for both surface mount and thru-hole, to fan mounted heat sinks for microprocessors and PUs. akefield Engineering offers a single source for all of your thermal requirements. DeltaPads are replacements to heat sink grease but without any mess. They are heat conducting, electrically isolating pads to go between the heat sink and your semiconductor device. TO-220 heatsinks will also fit TO-202 and TO-126 packages. Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig. 25 Fig. 26 Dimensions mm Digi-Key Price Each akefield Fig. Description x x Part No Part No. DeltaPad Thermal Pad TO-220 No Adhesive (.18mm) 18.0 x 12.7 x 3.6 dia ND P DeltaPad Thermal Pad TO-220, Adhesive (.18mm) 19.1 x 12.7 x 3.7 dia ND A DeltaPad Thermal Pad TO-220, No Adhesive (.23mm) 19.1 x 12.7 x 3.2 dia ND P 1 DeltaPad Thermal Pad TO-220, No Adhesive (.23mm) 19.1 x 12.7 x 3.7 dia ND P Kapton Thermal Pad, TO-220, No Adhesive (.15mm) 18.0 x 12.7 x 3.6 dia ND P Kapton Thermal Pad TO-220, No Adhesive (.15mm) 19.1 x 12.7 x 3.2 dia ND P Kapton Thermal Pad TO-220, No Adhesive (.15mm) 19.1 x 12.7 x 3.7 dia ND P Kapton Thermal Pad TO-220, No Adhesive (.15mm) 21.8 x 18.8 x 4.1 dia ND P Silicon Thermal Grease, 4 gram Plastic Pack ND SA Silicon Thermal Grease, 2 Oz. Jar ND Silicon Thermal Grease, 5 Oz. Tube ND Silicon Thermal Grease, 8 Oz. Jar ND Silicon Thermal Grease, 5 bs. an ND Synthetic Non-Silicon Thermal ompound 4 Oz Tube ND D-Pack/SOT-23 eat Sink, Pretinned, Autoinsertable x x ND T6 D-Pack/SOT-23 eat Sink, Pretinned, Autoinsertable x x ND TE6 4 TO-5 lip-on up Style ith 4-40 Thd Base 9.40 x 9.65 dia ND T5E 5 TO-220, Self-ocking, orizontal/vertical Mount, Black x x ND AB 6 TO-220, Self-ocking, orizontal/vertical Mount, Black x 6.86 x ND PAB TO-220, Vertical Mount ave-solderable, ith Tabs, Black x x ND AB TO-220, ow ost orizontal/vertical Mount, Black x x ND AB TO-220, Dual ow ost orizontal/vertical Mount, Black x x ND AB 7 TO-220, Dual Mount ow ost, Black x x ND AB TO-220, ow ost orizontal/vertical Mount, Black x 9.52 x ND AB TO-220, ow ost orizontal/vertical Mount, Black x 9.52 x ND AB TO-220, Vertical Mount, Black 25.4 x 12.7 x ND PAB TO-220, ave-solderable ow-ost eat Sinks 25.4 x 12.7 x ND AB 8 TO-220, Vertical Mount ave-solderable, ith Tabs x 5.46 x ND AB 9 TO-220 Self-ocking, Vertical Mount, Black x 9.14 x ND AB TO-220 Power Vertical Mount ith Pins/6-32Thds, Black x x ND ABP 10 TO-220 Power Vertical Mount ith Pins/6-32Thds, Black x x ND ABP TO-220 Power Vertical Mount ith Pins/6-32Thds, Black x x ND ABP TO-220 Power Vertical Mount ith Pins, Black x x ND ABP TO-220 Power Vertical Mount ith Pins, Black x x ND ABP TO-220 Power Vertical Mount ith Pins, Black x x ND ABP TO-220 Power Vertical Mount ith Pins, Black x x ND ABP 11 TO-220 Power Vertical Mount ith Pins, Black x x ND ABP TO-220 Power Vertical Mount ith Pins, Black x x ND ABP TO-220 Power Vertical Mount ith Pins, Black x x ND ABPN TO-220 Power Vertical Mount ith Pins, Black x x ND ABP TO-220 Pwr. Speedlip Mount ith Pins (Order clip below) x x ND ABPP Speedlip, Stainless Steel for 667 Series ND S 12 TO-220 Self-ocking orizontal/vertical Mount, Black x x ND AB TO-220 ow ost orizontal/vertical Mount, Black x 9.52 x ND AB 13 TO-220 Top Mount Booster for 270,272,280 Series, Black x x ND AB TO-220 Dual Mount orizontal, Black x 9.52 x ND AB 14 IGBT and SSRs Power Modules Black x x ND AB TO-3 Power orizontal Mount Double Fin, Black x x ND A 15 Power eat Sink orizontal, Double Fin, No oles x x ND K Power eat Sink, orizontal, Double Fin, No oles x x ND K Power eat Sink, orizontal, Double Fin, No oles x x ND K 16 TO-3 Power, orizontal Mount, Omnidirectional, Black x x ND A 17 TO-3 eavy Duty Power, orizontal Mount, Black x x ND A Power eat Sink, orizontal Mount, No oles, Black x x ND K Dip I eat Sink, Glue On, Black x x ND B 19 Surface Mount, Black 22.9 x 8.0 x ND T3 Surface Mount, Aluminum Natural 26.2 x 12.7 x ND T5 20 TO-220, orizontal and Vertical Mount, Black 14.5 x 12.7 x ND AB TO-220, ow-eight ave-solderable, Black 19.1 x 12.7 x ND AB 22 Stud-Mount, Black, ID=5.1mm x 33.8 x ND B alf Brick D/D onverter, Vertical, Black x x ND AB 23 alf Brick D/D onverter ith ardware/thermal Pad x x ND AB-MS4 alf Brick D/D onverter Vertical, Black x x ND AB RoS ompliant PU, PGA and BGA eat Sinks 609 Series: Fits PowerP 601, 604, 255BGA 628 Series: Fits IntelDX4, Intel 80486DX2, AM486DX2/DX4 658 Series: Fits IntelDX4, AM29240, PowerP 603 Dimensions mm Digi-Key Price Each akefield Fig. Description x x Part No Part No. PU ooler 18 35mm BGA Unidirectional Fin eat Sink x x ND AB mm BGA/PGA ith Thermal Tape, Black 16.5 x 16.5 x ND NE! TN20069-T mm QFP and 21mm BGA ith lips and Thermal Tape, Black x x ND ABS3 21mm BGA ith Thermal Double Sided Tape x x ND ABT4 21mm BGA ith Thermal Double Sided Tape x x ND ABT4E 25mm BGA ith Thermal Double Sided Tape x x ND ABT4 17x17 PGA No Tape, Black x x ND AB 17x17 PGA No Tape, Black x x ND AB 28-38mm QFP No Tape, Black x x ND AB 28-38mm QFP ith Thermal Tape (homerics T-405), Black x x ND ABT mm QFP ith Thermal Tape (Arclad 8223) Black x x ND ABT mm QFP ith Thermal Tape (homerics T-412), Black x x ND ABT mm QFP No Tape, Black x x ND AB 28-38mm QFP ith Thermal Tape (homerics T-412), Black x x ND ABT mm QFP ith Thermal Tape (homerics T-410), Black x x ND ABT mm QFP ith Thermal Tape (homerics T-410), Black x x ND ABT4E 28-38mm QFP No Tape, Black x x ND AB 28-38mm QFP ith Thermal Tape (homerics T-412), Black x x ND ABT mm QFP ith Thermal Tape (homerics T-410), Black x x ND ABT mm QFP No Tape, Black x x ND AB 28-38mm QFP ith Thermal Tape (homerics T-405), Black x x ND ABT mm QFP ith Thermal Tape (homerics T-412), Black x x ND ABT3 21mm BGA ith Omnidirectional Pin Fin eat Sink, Black x x ND ABT3 25mm BGA ith Omnidirectional Pin Fin eat Sink, Black x x ND AB Pin Fin eat Sinks, Black 40.6 x 40.6 x ND AB Omnidirectional Pin Fin, Black 27.9 x 27.9 x ND ABT4 PU omposite ooler RoS ompliant 26 PU omposite ooler for QFP, 169BGA, No Tape, Black x x ND D PU omposite ooler for QFP, 313BGA, No Tape, Black x x ND D RoS ompliant 1104 (N081)

4 igh Performance eat Sinks ATS maxifo eat Sinks have a low profile, spread fin array to maximize surface area for more effective convection (air) cooling. Their extruded aluminum fabrication minimizes thermal resistance and weight. Testing at an air flow rate of just 100 lfm shows that device junction temperatures (Tj) can be reduced by more than 40 percent below the temperatures achieved using other heat sinks. The maxigrip eat Sink Attachment System features a plastic frame clip that snaps securely around a component s perimeter. A stainless steel spring clip runs through the heat sink s fin field, fastens securely to the plastic frame and applies steady, even pressure to the component. The system allows easy sink detachment and reattachment with no damage to the component. There is no over or under tightening of the sink to the processor. omponent/heat sink assemblies using maxigrip meet Telcordia GR-63-ore Office Vibration; ETSI Transportation Vibration; and MI- STD-810 Shock Testing and Unpackaged Drop Testing standards. BGA ooling Solutions maxigrip Assembly Attachment eat Sink for Standard eight omponents from 3 to 4.5mm, Blue Anodized, Phase hange Material FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1000-ND ATS1001-ND ATS1002-ND ATS1003-ND ATS1004-ND ATS1005-ND ATS1006-ND ATS1007-ND ATS1008-ND ATS1009-ND ATS1010-ND ATS1011-ND ATS1012-ND ATS1013-ND ATS1014-ND ATS1015-ND ATS1016-ND ATS1017-ND ATS1018-ND ATS1019-ND ATS1020-ND ATS1021-ND ATS1022-ND ATS1023-ND ATS1024-ND ATS1025-ND ATS1026-ND ATS1027-ND ATS1028-ND ATS1029-ND ATS1030-ND ATS1031-ND ATS1032-ND ATS1033-ND ATS1034-ND ATS1035-ND ATS1036-ND ATS1037-ND FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1038-ND ATS1039-ND ATS1040-ND ATS1041-ND ATS1042-ND ATS1043-ND ATS1044-ND ATS1045-ND ATS1046-ND ATS1047-ND omponent height is defined as the distance from the top of the PB to the top of the component maxigrip Assembly Attachment eat Sink for ow Profile omponents from 1.5 to 2.99mm, Black Anodized, Phase hange Material FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1048-ND ATS1049-ND ATS1050-ND ATS1051-ND ATS1052-ND ATS1053-ND ATS1054-ND ATS1055-ND ATS1056-ND ATS1057-ND ATS1058-ND ATS1059-ND ATS1060-ND ATS1061-ND ATS1062-ND ATS1063-ND ATS1064-ND ATS1065-ND ATS1066-ND ATS1067-ND ATS1068-ND ATS1069-ND ATS1070-ND ATS1071-ND ATS1072-ND ATS1073-ND ATS1074-ND ATS1075-ND ATS1076-ND ATS1077-ND ATS1078-ND ATS1079-ND ATS1080-ND ATS1081-ND ATS1082-ND ATS1083-ND ATS1084-ND ATS1085-ND ATS1086-ND ATS1087-ND ATS1088-ND ATS1089-ND ATS1090-ND ATS1091-ND ATS1092-ND ATS1093-ND ATS1094-ND ATS1095-ND omponent height is defined as the distance from the top of the PB to the top of the component (ontinued) (N081) 1105

5 igh Performance eat Sinks BGA ooling Solutions (ont.) maxigrip eat Sink Attachment Assembly with Straight-Fin eat Sink, Black Anodized, Thermal Tape BGA ooling Solutions maxifo eat Sink Using Thermal Tape Attachment, Blue Anodized FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1147-ND ATS1148-ND ATS1149-ND ATS1150-ND ATS1151-ND ATS1152-ND ATS1153-ND ATS1154-ND ATS1155-ND ATS1156-ND ATS1157-ND ATS1158-ND ATS1159-ND ATS1160-ND ATS1161-ND ATS1162-ND ATS1163-ND ATS1164-ND ATS1165-ND ATS1166-ND ATS1167-ND ATS1168-ND ATS1169-ND ATS1170-ND ATS1171-ND ATS1172-ND ATS1173-ND ATS1174-ND ATS1175-ND ATS1176-ND ATS1177-ND ATS1178-ND ATS1179-ND ATS1180-ND ATS1181-ND ATS1182-ND ATS1183-ND ATS1184-ND ATS1185-ND ATS1186-ND ATS1187-ND ATS1188-ND ATS1189-ND ATS1190-ND ATS1191-ND ATS1192-ND ATS1193-ND ATS1194-ND maxigrip Installation and Removal Tools eat Sink Size is referring to maxigrip eat Sink Attachment Assemblies compatible with tools eat Sink Size (mm) Digi-Key Price ATS Part No. Each Part No ATS1382-ND MGT ATS1383-ND MGT ATS1384-ND MGT ATS1385-ND MGT ATS1386-ND MGT ATS1387-ND MGT ATS1388-ND MGT ATS1389-ND MGT ATS1390-ND MGT ATS1391-ND MGT ATS1392-ND MGT ATS1393-ND MGT ATS1394-ND MGT ATS1395-ND MGT ATS1396-ND MGT FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1096-ND ATS1097-ND ATS1098-ND ATS1099-ND ATS1100-ND ATS1101-ND ATS1102-ND ATS1103-ND ATS1104-ND ATS1105-ND ATS1106-ND ATS1107-ND ATS1108-ND ATS1109-ND ATS1110-ND ATS1111-ND ATS1112-ND ATS1113-ND ATS1114-ND ATS1115-ND ATS1116-ND ATS1117-ND ATS1118-ND ATS1119-ND ATS1120-ND ATS1121-ND ATS1122-ND ATS1123-ND ATS1124-ND ATS1125-ND ATS1126-ND ATS1127-ND ATS1128-ND ATS1129-ND ATS1130-ND ATS1131-ND ATS1132-ND ATS1133-ND ATS1134-ND ATS1135-ND ATS1136-ND ATS1137-ND ATS1138-ND ATS1139-ND ATS1140-ND ATS1141-ND ATS1142-ND ATS1143-ND ATS1144-ND ATS1145-ND ATS1146-ND (ontinued) 1106 (N081)

6 igh Performance eat Sinks (ont.) igh Aspect Ratio Extrusion Straight Fin eat Sink with Thermal Tape Attachment, Black Anodized ross-ut eat Sink with Thermal Tape Attachment, Black Anodized FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1195-ND ATS1196-ND ATS1197-ND ATS1198-ND ATS1199-ND ATS1200-ND ATS1201-ND ATS1202-ND ATS1203-ND ATS1204-ND ATS1205-ND ATS1206-ND ATS1207-ND ATS1208-ND ATS1209-ND ATS1210-ND ATS1211-ND ATS1212-ND ATS1213-ND ATS1214-ND ATS1215-ND ATS1216-ND ATS1217-ND ATS1218-ND ATS1219-ND ATS1220-ND ATS1221-ND ATS1222-ND ATS1223-ND ATS1224-ND ATS1225-ND ATS1226-ND ATS1227-ND ATS1228-ND ATS1229-ND ATS1230-ND ATS1231-ND ATS1232-ND ATS1233-ND ATS1234-ND ATS1235-ND ATS1236-ND ATS1237-ND ATS1238-ND ATS1239-ND ATS1240-ND ATS1241-ND ATS1242-ND ATS1243-ND ATS1244-ND ATS1245-ND ATS1246-ND ATS1247-ND ATS1248-ND ATS1249-ND ATS1250-ND ATS1251-ND ATS1252-ND ATS1253-ND ATS1254-ND ATS1255-ND ATS1256-ND ATS1257-ND ATS1258-ND ATS1259-ND ATS1260-ND ATS1261-ND ATS1262-ND Dimensions Unducted Flow 200 FM Digi-Key Price Each (1m/sec.) Part No ATS1263-ND ATS1264-ND ATS1265-ND ATS1266-ND ATS1267-ND ATS1268-ND ATS1269-ND ATS1270-ND ATS1271-ND ATS1272-ND ATS1273-ND ATS1274-ND ATS1275-ND ATS1276-ND ATS1277-ND ATS1278-ND ATS1279-ND ATS1280-ND ATS1281-ND ATS1282-ND ATS1283-ND ATS1284-ND ATS1285-ND ATS1286-ND ATS1287-ND ATS1288-ND ATS1289-ND ATS1290-ND ATS1291-ND ATS1292-ND ATS1293-ND ATS1294-ND ATS1295-ND ATS1296-ND ATS1297-ND ATS1298-ND ATS1299-ND ATS1300-ND ATS1301-ND ATS1302-ND ATS1303-ND ATS1304-ND ATS1305-ND ATS1306-ND ATS1307-ND ATS1308-ND ATS1309-ND ATS1310-ND ATS1311-ND ATS1312-ND ATS1313-ND ATS1314-ND ATS1315-ND ATS1316-ND ATS1317-ND ATS1318-ND ATS1319-ND ATS1320-ND ATS1321-ND ATS1322-ND ATS1323-ND ATS1324-ND ATS1325-ND ATS1326-ND ATS1327-ND ATS1328-ND ATS1329-ND ATS1330-ND (ontinued) (N081) 1107

7 ASI ooling Solutions ustom maxifo eat Sinks, Black Anodized Fig. 1 Fig. 2 Fig. 3 igh Performance eat Sinks (ont.) ustom ooling Solutions Using maxigrip Attachment For Flip-hip Processors (such as Freescale MPs) Black Anodized, Phase hange Material Not to be used with maxigrip Installation and Removal Tools Fig. 1 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Top View Fig. 2 Side View Side View FM Digi-Key Price Each Fig. (1m/sec.) (1m/sec.) Part No ith Tape ATS1331-ND ATS1335-ND ATS1336-ND ATS1337-ND ATS1338-ND ATS1339-ND ATS1341-ND ATS1342-ND ATS1332-ND ATS1333-ND ATS1334-ND ATS1340-ND ATS1343-NDΔ ATS1344-NDΔ ithout Tape ATS1345-ND ATS1349-ND ATS1350-ND ATS1351-ND ATS1352-ND ATS1356-ND ATS1346-ND ATS1347-ND ATS1348-ND ATS1355-ND ATS1353-ND ATS1354-ND Red Anodized Δ Gold Anodized GA ooling Solutions (For Freescale MP 8641D) Black Anodized, Includes Mounting ardware Fig. 1 Fig. 2 Dimensions omponent Unducted Flow Ducted Flow (mm) FM Digi-Key Price Each Fig. (mm) (1m/sec.) (1m/sec.) Part No x ATS1365-ND x ATS1366-ND x ATS1367-ND x ATS1368-ND x ATS1369-ND x ATS1370-ND x ATS1371-ND x ATS1372-ND x ATS1373-ND x ATS1374-ND x ATS1375-ND igh onductivity Thermal Tape Blue Ice ow Profile ustom maxifo eat Sinks BGA ooling Solutions with Thermal Tape Blue Anodized FM Digi-Key Price Each (1m/sec.) (1m/sec.) Part No ATS1376-ND ATS1377-ND ATS1378-ND ATS1379-ND ATS1380-NDΔ Gold Anodized Δ Black Anodized ED eat Sinks For ED ighting Modules, Black Anodized Fig. 1 Fig. 2 Fig. 3 Fig. 4 Side View Top View Side View Top View FM Digi-Key Price Each Fig. (1m/sec.) (1m/sec.) Part No ATS1357-ND ATS1358-ND ATS1359-ND ATS1360-ND Dimensions Unducted Flow 200 FM Digi-Key Price Each Fig. (1m/sec.) Part No ATS1361-ND ATS1362-ND ATS1363-ND ATS1364-ND Thermal Tape 1108 (N081)