PolySwitch Resettable Devices Automotive Devices

Transcription

1 PolySwitch Resettable evices utomotive evices We have provided PPT resettable devices for the automotive industry for over 25 years. With the advent of TS16949 and our continued involvement in the automotive industry, we developed automotive specific versions of our PolySwitch PPT devices (nanosm, microsm, minism, HS, SM, HR, H, GR and ). These products are qualified and sold under PS400 specification which is derived from - Q200, the standard for electronic components used in the automotive industry. The key difference between these product families and other protection devices in our circuit protection product portfolio is the qualification process followed according to a series of rigorous tests related to the automotive environment. s a result, they are characterized by specific additional values determined post automotive related testing. PolySwitch Resettable evices utomotive evices enefits xpertise from the world s leading resettable overcurrent protection manufacturer High quality products from the world s largest passive component manufacturer Worldwide team dedicated to support automotive applications Wide range of dedicated automotive surface-mount and radial-leaded resettable overcurrent devices High performance transient voltage protection devices eatures RoHS compliant Overcurrent and overvoltage circuit protection devices Resettable and single-use overcurrent devices Wide range of form factor and termination methods Products meet applicable automotive industry standards evices compatible with high-volume electronics assembly pplications Motor and motor circuit protection including power door-locks, mirrors, lumbar pumps, seats, sunroofs and windows lectronic ontrol Unit (U) I/O protection Heating Ventilation and ooling (HV) motor and I/O protection Telematics, infotainment and navigations systems Liquid rystal isplay (L) back-light heaters Power and cigarette lighter outlets, plugs and adapter/chargers Powered networks and busses ir-flow detection and overcurrent protection in HV and cooling fan systems Stall detection in express window and sunroof circuits Power distribution, electrical centers and junction box resettable overcurrent protection Wire downsizing Motor lectromagnetic Interference (MI) suppression lectrostatic ischarge (S) damage protection Load dump and other transient voltage protection 173

2 Table 1 Product Series - urrent Rating, Voltage Rating / Typical Resistance for utomotive evices Voltage Rating Hold urrent () GR 16V HR 16V HR 30V H 32V Ω Ω Ω 0.90Ω Ω Ω Ω Ω Ω Ω 0.30Ω Ω Ω Ω Ω Ω 0.07Ω 0.090Ω Ω Ω Ω 0.05Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω 0.06Ω Ω 0.00Ω Ω Ω Ω Ω 0.0Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω Ω HS 16V SM 16V SM 30V SM 60V 14V Voltage Rating Hold urrent () nanosm 48V nanosm 24V nanosm 16V microsm 30V minism 60V minism 30V minism 24V Ω Ω 6.70Ω Ω Ω Ω Ω 1.950Ω Ω Ω Ω Ω minism 16V Ω 0.00Ω Ω Ω Ω Ω 174 RoHS ompliant, LV ompliant

3 Table 2 Maximum mbienttemperature Part Number GR 16V Radial-leaded GR GR GR GR GR GR GR GR GR GR HR (HighTemperature) 30V Radial-leaded HR HR HR HR (HighTemperature) 16V Radial-leaded HR HR HR HR HR HR HR HR HR HR HR HR HR HR HR HR H (HighTemperature) 32V Radial-leaded H H H H H H H HS (HighTemperature) 16V Surface-mount Thermal erating for utomotive evices [Hold urrent () at mbient Temperature ( )] HS HS HS HS PolySwitch Resettable evices utomotive evices RoHS ompliant, LV ompliant 175

4 Table 2 Thermal erating for utomotive evices [Hold urrent () at mbient Temperature ( )] Maximum mbienttemperature Part Number SM 16-60V Surface-mount SM SM SM SM SM SM SM SM SM nanosm 16-48V Surface-mount nanosm nanosm nanosm nanosm microsm 30V Surface-mount microsm microsm minism 16-60V Surface-mount minism minism minism minism minism minism075/ minism110/ minism110/ minism5/ minism150/ minism150/ minism260/ V laded evice / / / /16-W /16-W RoHS ompliant, LV ompliant

5 igure 1-4 Thermal erating urves for utomotive evices = GR = HR H igure 1 % of Rated Hold andtrip urrent igure mbienttemperature ( ) PolySwitch Resettable evices utomotive evices % of Rated Hold andtrip urrent mbienttemperature ( ) = SM, nanosm, microsm, minism = HS igure % of Rated Hold andtrip urrent mbienttemperature ( ) RoHS ompliant, LV ompliant 177

6 igure 1-4 Thermal erating urves for utomotive evices igure % of Rated Hold andtrip urrent mbienttemperature ( ) Table 3 lectrical haracteristics for utomotive evices Part Number GR 16V Radial-leaded I H ()@ R 1MX GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 GR , 8, 9 HR (HighTemperature) 30V Radial-leaded HR , 9, 10 HR , 8, 9 HR , 9, 10 HR (HighTemperature) 16V Radial-leaded I H ()@ R amx I T () V MX (V ) I MX () P Typ (W) Max.Time-to-trip () (s) HR , 9, 10 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 HR , 8, 9 R MIN (Ω) R 1MX (Ω) R amx (Ω) igure for imensions 178 RoHS ompliant, LV ompliant

7 Table 3 lectrical haracteristics for utomotive evices Part Number H (HighTemperature) 32V Radial-leaded H , 9, 10 H , 9, 11 H , 9, 10 H , 9, H , 9, H , 9, H , 9, HS (HighTemperature) 16V Surface-mount HS HS HS HS SM 16-60V Surface-mount SM SM SM SM SM SM SM SM SM nanosm 16-48V Surface-mount nanosm nanosm nanosm nanosm microsm 30V Surface-mount I H ()@ R 1MX microsm microsm minism 16-60V Surface-mount I H ()@ R amx I T () V MX (V ) I MX () minism minism minism minism minism minism075/ minism110/ minism110/ minism5/ minism150/ minism150/ minism260/ P Typ (W) Max.Time-to-trip () (s) R MIN (Ω) R 1MX (Ω) R amx (Ω) igure for imensions PolySwitch Resettable evices utomotive evices RoHS ompliant, LV ompliant 179

8 Table 3 lectrical haracteristics for utomotive evices Part Number 14V laded evice I H ()@ R 1MX I H ()@ R amx I T () V MX (V ) I MX () P Typ (W) Max.Time-to-trip () (s) / / / /16-W /16-W R MIN (Ω) R 1MX (Ω) R amx (Ω) igure for imensions Notes: I H : Hold current: maximum current device will pass without interruption in 25, unless otherwise specified (20 for SM). I T : Trip current: minimum current that will switch the device from low resistance to high resistance in 25 still air, unless otherwise specified. V MX : Maximum voltage device can withstand without damage at rated current. I MX : Maximum fault current device can withstand without damage at rated voltage. P : Power dissipated from device when in the tripped state in 25 still air, unless otherwise specified. R MIN : Minimum resistance of device as supplied at 25, unless otherwise specified. R 1MX : Maximum resistance of device when measured one hour post reflow (surface-mount device) or one hour post trip (radial-leaded device) at 25 unless otherwise specified. R amx : Maximum functional resistance of device after being subjected to the stresses described in PS400 at 25, unless otherwise specified. R amin : Minimum functional resistance of device after being subjected to the stresses described in PS400 at 25, unless otherwise specified. igure 5-15 imension igures for utomotive evices igure 5 igure 6 igure 7 H G G L L L L igure 8 igure 9 igure 10 J J H L L L L igure 11 igure igure 13 I (x2) G H L to L L L L to L L L 180 RoHS ompliant, LV ompliant

9 igure 5-15 imension igures for utomotive evices igure 14 G H (x2) Part Number I igure 15 Table 4 imensions for utomotive evices in Millimeters (Inches) GR 16V Radial-leaded GR , 8, (0.35) (0.56) (0.) (0.3) (0.17) (0.20) (0.15) (0.0) (0.049) (0.06) 9 GR , 8, (0.41) (0.61) (0.) (0.3) (0.17) (0.20) (0.05) (0.155) (0.049) (0.06) 9 GR , 8, (0.42) (0.73) (0.) (0.3) (0.17) (0.20) (0.05) (0.160) (0.049) (0.06) 9 GR , 8, (0.44) (0.73) (0.) (0.3) (0.17) (0.20) (0.05) (0.177) (0.049) (0.07) 9 GR , 8, (0.50) (0.88) (0.) (0.3) (0.17) (0.20) (0.05) (0.200) (0.049) (0.07) 9 GR , 8, (0.55) (0.91) (0.) (0.3) (0.17) (0.20) (0.05) (0.224) (0.049) (0.08) 9 GR , 8, (0.65) (1.01) (0.) (0.3) (0.17) (0.20) (0.05) (0.274) (0.049) (0.08) 9 GR , 8, (0.69) (1.04) (0.) (0.3) (0.17) (0.20) (0.05) (0.294) (0.049) (0.09) 9 GR , 8, (0.69) (1.14) (0.14) (0.3) (0.37) (0.43) (0.06) (0.190) (0.057) (0.06) 9 GR , 8, (0.925) (1.13) (0.14) (0.3) (0.37) (0.43) (0.06) (0.308) (0.057) (0.07) 9 HR (HighTemperature) 30V Radial-leaded HR , 9, (0.29) (0.50) (0.13) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 10 HR , 8, (0.27) (0.43) (0.13) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 9 HR , 9, (0.38) (0.54) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 10 G H Typ. J Max. igure PolySwitch Resettable evices utomotive evices RoHS ompliant, LV ompliant 181

10 Table 4 imensions for utomotive evices in Millimeters (Inches) Part Number G HR (HighTemperature) 16V Radial-leaded HR , 9, (0.37) (0.57) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 10 HR , 8, (0.35) (0.55) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 9 HR , 8, (0.39) (0.59) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 9 HR , 8, (0.41) (0.61) (0.) (0.30) (0.17) (0.23) (0.05) (0.155) (0.049) (0.06) 9 HR , 8, (0.44) (0.74) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 9 HR , 8, (0.44) (0.73) (0.) (0.30) (0.17) (0.23) (0.05) (0.177) (0.049) (0.07) 9 HR , 8, (0.50) (0.88) (0.) (0.30) (0.17) (0.23) (0.05) (0.200) (0.049) (0.07) 9 HR , 8, (0.55) (0.86) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 9 HR , 8, (0.55) (0.93) (0.) (0.30) (0.17) (0.23) (0.05) (0.224) (0.049) (0.08) 9 HR , 8, (0.65) (0.88) (0.) (0.30) (0.17) (0.23) (0.05) (0.049) (0.06) 9 HR900 16, , 8, (0.65) (1.01) (0.) (0.30) (0.17) (0.23) (0.05) 9 HR , 8, (0.69) (1.04) (0.) (0.30) (0.37) (0.43) (0.05) (0.294) (0.049) (0.06) 9 HR , 8, (0.83) (1.03) (0.) (0.30) (0.37) (0.43) (0.05) (0.049) (0.06) 9 HR , 8, (0.925) (1.13) (0.14) (0.30) (0.37) (0.43) (0.06) (0.308) (0.057) (0.08) 9 HR , 8, (0.93) (1.13) (0.14) (0.30) (0.37) (0.43) (0.06) (0.049) (0.06) 9 HR , 8, (0.93) (1.13) (0.14) (0.30) (0.37) (0.43) (0.06) (0.308) 9 H (HighTemperature) 32V Radial-leaded H , 9, (0.29) (0.50) (0.17) (0.23) (0.30) (0.13) 10 H , 9, (0.27) (0.43) (0.17) (0.23) (0.30) (0.) 11 H , 9, (0.38) (0.54) (0.17) (0.23) (0.30) (0.) 10 H , 9, (0.40) (0.61) (0.17) (0.23) (0.30) (0.15) H , 9, (0.55) (0.95) (0.17) (0.23) (0.45) (0.15) H , 9, (0.83) (0.98) (0.37) (0.43) (0.30) (0.15) H , 9, (0.93) (1.10) (0.37) (0.43) (0.30) (0.16) H Typ. J Max. igure 182 RoHS ompliant, LV ompliant

11 Table 4 imensions for utomotive evices in Millimeters (Inches) Part Number G H igure HS (HighTemperature) 16V Surface-mount HS (0.186) (0.214) (0.060) (0.166) (0.194) (0.010) (0.014) (0.010) (0.014) (0.0) (0.018) HS (0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) HS (0.315) (0.370) (0.118) (0.240) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) HS (0.315) (0.370) (0.118) (0.240) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM 16-60V Surface-mount SM (0.265) (0.314) (0.5) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM (0.265) (0.314) (0.5) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM (0.265) (0.314) (0.5) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM (0.265) (0.314) (0.118) (0.19) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017) SM (0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM (0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM (0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) SM (0.315) (0.370) (0.118) (0.24) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017) PolySwitch Resettable evices utomotive evices Part Number igure nanosm 30V Surface-mount nanosm (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) nanosm (0.118) (0.134) (0.023) (0.032) (0.054) (0.071) (0.010) (0.030) (0.003) microsm 30V Surface-mount microsm (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) microsm (0.118) (0.135) (0.019) (0.034) (0.092) (0.110) (0.010) (0.030) (0.003) RoHS ompliant, LV ompliant 183

12 Table 4 imensions for utomotive evices in Millimeters (Inches) Part Number igure minism 16-60V Surface-mount minism (0.172) (0.186) (0.025) (0.035) (0.1) (0.134) (0.010) (0.040) (0.008) minism (0.172) (0.186) (0.025) (0.035) (0.1) (0.134) (0.010) (0.040) (0.008) minism (0.172) (0.186) (0.025) (0.035) (0.1) (0.134) (0.010) (0.040) (0.008) minism (0.172) (0.186) (0.025) (0.035) (0.1) (0.134) (0.010) (0.040) (0.008) minism (0.172) (0.186) (0.015) (0.025) (0.1) (0.134) (0.010) (0.040) (0.008) minism075/ (0.172) (0.190) (0.032) (0.057) (0.1) (0.134) (0.010) (0.040) (0.008) minism110/ (0.172) (0.190) (0.011) (0.019) (0.1) (0.134) (0.010) (0.040) (0.008) minism110/ (0.172) (0.190) (0.032) (0.057) (0.1) (0.134) (0.010) (0.040) (0.008) minism5/ (0.172) (0.190) (0.011) (0.019) (0.1) (0.134) (0.010) (0.040) (0.008) minism150/ (0.172) (0.190) (0.011) (0.019) (0.1) (0.134) (0.010) (0.040) (0.008) minism150/ (0.172) (0.190) (0.040) (0.077) (0.1) (0.134) (0.010) (0.040) (0.008) minism260/ (0.172) (0.190) (0.042) (0.060) (0.1) (0.134) (0.010) (0.040) (0.008) Part Number 14V laded evice (x2) G H I igure / (1.173) (1.185) (0.343) (0.366) (0.423) (0.443) (0.238) (0.262) (0.) (0.0) (0.130) (0.154) (0.134) (0.157) (0.067) (0.091) (0.429) (0.453) / (1.173) (1.185) (0.343) (0.366) (0.423) (0.443) (0.238) (0.262) (0.) (0.0) (0.130) (0.154) (0.134) (0.157) (0.067) (0.091) (0.429) (0.453) / (1.173) (1.185) (0.343) (0.366) (0.423) (0.443) (0.238) (0.262) (0.) (0.0) (0.130) (0.154) (0.134) (0.157) (0.067) (0.091) (0.429) (0.453) /16-W (1.049) (1.077) (0.339) (0.362) (0.423) (0.443) (0.238) (0.262) (0.) (0.0) (0.071) (0.087) (0.138) (0.154) (0.067) (0.091) (0.748) (0.764) /16-W (1.049) (1.077) (0.339) (0.362) (0.423) (0.443) (0.238) (0.262) (0.) (0.0) (0.071) (0.087) (0.138) (0.154) (0.067) (0.091) (0.748) (0.764) 184 RoHS ompliant, LV ompliant

13 igure Typical Time-to-trip at 25 for utomotive evices GR = GR400 = GR500 = GR600 = GR700 = GR800 = GR900 G = GR0 H = GR1 I = GR00 J = GR1400 HR = HR050 = HR070 = HR = HR200 = HR300 = HR400 G = HR450 H = HR550 I = HR600 J = HR650 K = HR700 L = HR750 M= HR800 N = HR900 O = HR0 P = HR1 Q = HR1300 R = HR1400 S = HR1500 igure 16 Time-to-trip (s) igure 17 Time-to-trip (s) G H I JKLM N OP QRS G H I J ault urrent () J I H G S R Q O P N M K L J I H PolySwitch Resettable evices utomotive evices G ault urrent () H = H050 = H070 = H = H300 = H500 = H750 G = H0 igure 18 Time-to-trip (s) G G ault urrent () RoHS ompliant, LV ompliant 185

14 igure Typical Time-to-trip at 25 for utomotive evices HS = HS = HS160 = HS200 = HS300 igure Time-to-trip (s) ault urrent () SM = SM030 = SM050 = SM075 = SM = SM5 = SM150 G = SM185 H = SM200 I = SM250 igure 20 Time-to-trip (s) 10 1 H G I 0.10 G H I ault urrent () nanosm = nanosm0 = nanosm016 = nanosm020 = nanosm035 igure Time-to-trip (s) ault urrent () 186 RoHS ompliant, LV ompliant

15 igure Typical Time-to-trip at 25 for utomotive evices microsm = microsm005 = microsm010 minism = minism010, minism014 = minism020 = minism030 = minism050 = minism075/24 = minism110/16 G = minism110/24 H = minism5/16 I = minism150/16 J = minism150/24 K = minism260/16 igure 22 Time-to-trip (s) Time-to-trip (s) igure ault urrent () GH J I K K G H I J PolySwitch Resettable evices utomotive evices ault urrent () = 30 = 25 = 20 = 15 = 10 igure 24 0 Time-to-trip (s) ault urrent () RoHS ompliant, LV ompliant 187

16 Table 5 Physical haracteristics and nvironmental Specifications for utomotive evices GR Physical haracteristics Lead material GR400 to GR1 : Tin Plated opper, 0.52mm 2 (20WG) ø 0.8 mm/0.032in GR00 to GR1400 : Tin Plated opper, 0.82mm 2 (18WG) ø 1.0mm/0.040in Soldering characteristics Solderability per NSI/J-ST-002 ategory 3 Solder heat withstand GR400: per I Test Tb, Method 1, ondition : can withstand 5 seconds at 260 ± 5 GR500-GR1400: per I Test Tb, Method 1, ondition : can withstand 10 seconds at 260 ± 5 Insulating material ured, flame-retardant epoxy polymer; meets UL 94V-0 Operation temperature -40 ~85 Note: See PS400 for other physical characteristics. evices are not designed to be placed through a reflow process. nvironmental Specifications Test onditions Resistance hange Passive aging 70, 0 hours ±5% 85, 0 hours ±5% Humidity aging 85, 85% RH, 0 hours ±5% Thermal shock 85, -40 (10 times) ±5% Solvent resistance MIL-ST-202, Method 215 No change Note: See PS400 for other environmental specifications. HR Physical haracteristics Lead material HR050 to HR200 : Tin-plated opper lad Steel, 0.205mm 2 (24 WG), ø 0.51mm/0.020in HR300 to HR1 : Tin-plated copper 0.52mm 2 (20 WG), ø 0.81mm/0.032 in HR1300 to HR1500 : Tin-plated copper 0.82mm 2 (18 WG), ø 1.0mm/0.04 in Soldering characteristics Solderability per NSI/J-ST 002 ategory 3 Solder heat withstand per I , Test Tb, Method 1, ondition ; can withstand 10 seconds at 260 ± 5 Insulating material Operation temperature ured, flame-retardant epoxy polymer; meets UL 94V-0 requirements -40 ~5 Note: See PS400 for other physical characteristics. evices are not designed to be placed through a reflow process. nvironmental Specifications Test onditions Resistance hange Passive aging 70, 0 hours ±5% 85, 0 hours ±5% Humidity aging 85, 85% RH, 0 hours ±5% Thermal shock 5, -40 (10 times) ±5% Solvent resistance MIL-ST-202, Method 215 No change Note: See PS400 for other environmental specifications. H Physical haracteristics Lead material H050 to H : Tin-plated opper lad Steel, 0.205mm 2 (24 WG), ø 0.51mm/0.020in. H300 to H750 : Tin-plated opper 0.52mm 2 (20 WG), ø 0.81mm/0.032in H0 Soldering characteristics Solderability per NSI/J-ST 002 ategory 3 : Tin-plated copper 0.82mm 2 (18 WG), ø 1.0mm/0.04 in Solder heat withstand per I , Test Tb, Method 1, ondition ; can withstand 10 seconds at 260 ± 5 Insulating material Operation temperature ured, flame-retardant epoxy polymer; meets UL 94V-0 requirements -40 ~5 Note: See PS400 for other physical characteristics. evices are not designed to be placed through a reflow process. 188 RoHS ompliant, LV ompliant

17 Table 5 Physical haracteristics and nvironmental Specifications for utomotive evices H nvironmental Specifications Test onditions Resistance hange Passive aging 70, 0 hours ±5% HS Physical haracteristics Lead material Tin-plated brass to MIL-T Soldering characteristics Solderability per NSI-J-ST-002 ategory 1 Solder heat withstand lammability Operation temperature Note: See PS400 for other physical characteristics. nvironmental Specifications 85, 0 hours ±5% Humidity aging 85, 85% RH, 0 hours ±5% Thermal shock 5, -40 (10 times) ±5% Solvent resistance MIL-ST-202, Method 215 No change Note: See PS400 for other environmental specifications. per I-ST , Test Tb, Section 5, Method 1 per I Needle flame test for 20 seconds -40 ~5 Test onditions Resistance hange Passive aging 70, 0 hours ±3% Typical 85, 0 hours ±5% Typical Humidity aging 85, 85% RH, 0 hours ±1.2% Typical Thermal shock 5, -40 (20 times) -33% Typical Solvent resistance reon No change Trichloroethane Hydrocarbons No change No change PolySwitch Resettable evices utomotive evices Note: See PS400 for other environmental specifications. SM Physical haracteristics Terminal pad material 98%+ Tin-plated rass Soldering characteristics Solderability per NSI-J-ST-002 ategory 1 Solder heat withstand per I-ST , Test Tb, Section 5, Method 1 lammability resistance per I Needle flame test for 20 seconds Recommended storage conditions 40 max, 70% RH max; devices may not meet specified ratings if storage conditions are exceeded Operation temperature -40 ~85 Note: See PS400 for other physical characteristics. nvironmental Specifications Test onditions Resistance hange Passive aging 60, 0 hours ±3% typical 85, 0 hours ±5% typical Humidity aging 85, 85% RH, hours ±1.2% typical Thermal shock 85, -40 (20 times) -33% typical 5, -55 (10 times) -33% typical Solvent resistance reon No change Trichloroethane No change Hydrocarbons No change Note: See PS400 for other environmental specifications. RoHS ompliant, LV ompliant 189

18 Table 5 Physical haracteristics and nvironmental Specifications for utomotive evices nanosm/microsm/minism Physical haracteristics Terminal pad material % matte tin with nickel underplate Soldering characteristics Solderability per NSI-J-ST-002 ategory 3 Solder heat withstand per I-ST , Test Tb, Section 5, Method 1 lammability resistance per I Needle flame test for 20 seconds Recommended storage conditions 40 max, 70% RH max; devices may not meet specified ratings if storage conditions are exceeded Operation temperature -40 ~85 Note: See PS400 for other physical characteristics. nvironmental Specifications Test onditions Resistance hange Passive aging 60, 0 hours ±3% typical 85, 0 hours ±5% typical Humidity aging 85, 85% RH, hours ±1.2% typical Thermal shock 85, -40 (20 times) -33% typical 5, -55 (10 times) -33% typical Solvent resistance reon No change Trichloroethane No change Hydrocarbons No change Note: See PS400 for other environmental specifications. Physical haracteristics Lead material rass H65, thickness: 0.8mm, tin plating thickness: 5µm Soldering characteristics N Solder heat withstand N Insulating material olored PT, meets UL94V-0 requirements Operation temperature -40 ~5 Note: See PS400 for other physical characteristics. nvironmental Specifications Test onditions Resistance hange Passive aging 85, 0 hours ±5% Humidity aging 85, 85% RH,0 hours ±5% 85, 85% RH (with 10% I HOL ), 500 hours ±5% Thermal shock 85 to -40 (5 times) meet S Solvent resistance MIL-ST-202, Method 215 No change Note: See PS400 for other environmental specifications. 190 RoHS ompliant, LV ompliant

19 Table 6 Packaging and Marking Information for utomotive evices Part Number GR Radial-leaded GR ,000 G4 * GR ,500,500 G4 * GR400-P 2,000 10,000 G4 * GR ,000 G5 * GR ,000 10,000 G5 * GR500-P 2,000 10,000 G5 * GR ,000 G6 * GR ,000 10,000 G6 * GR600-P 2,000 10,000 G6 * GR ,000 G7 * GR ,500 7,500 G7 * GR700-P 1,500 7,500 G7 * GR ,000 G8 * GR ,000 5,000 G8 * GR800-P 1,000 5,000 G8 * GR ,000 G9 * GR ,000 5,000 G9 * GR900-P 1,000 5,000 G9 * GR ,000 G10 * GR0-2 1,000 5,000 G10 * GR0-P 1,000 5,000 G10 * GR ,000 G11 * GR1-2 1,000 5,000 G11 * GR1-P 1,000 5,000 G11 * GR ,000 G * GR00-2 1,000 5,000 G * GR00-P 1,000 5,000 G * GR ,000 G14 * GR ,000 5,000 G14 * GR1400-P 1,000 5,000 G14 * HR (HighTemperature) Radial-leaded ag Quantity Tape & Reel Quantity mmo Pack Quantity HR ,000 H0.5 * HR ,500,500 H0.7 * HR050-P 2,500,500 H0.7 * HR ,000 H0.7 * HR ,500,500 H0.7 * HR070-P 2,500,500 H0.7 * HR ,000 H1.0 * HR-2 2,500,500 H1.0 * HR-P 2,500,500 H1.0 * HR ,000 H2 * HR ,500,500 H2 * HR200-P 2,500,500 H2 * HR ,000 H3 * HR ,000 10,000 H3 * HR300-P 2,000 10,000 H3 * HR ,000 H4 * HR ,500 7,500 H4 * HR400-P 1,500 7,500 H4 * * These devices have been designed for use in automotive applications. or commercial alternatives to these product series please see the radial-leaded devices section or surface-mount devices section. Standard Package Quantity Part Marking gency Recognition PolySwitch Resettable evices utomotive evices RoHS ompliant, LV ompliant 191

20 Table 6 Packaging and Marking Information for utomotive evices Part Number HR (HighTemperature) Radial-leaded HR ,000 H4.5 * HR ,500 7,500 H4.5 * HR450-P 1,500 7,500 H4.5 * HR ,000 H5.5 * HR ,000 10,000 H5.5 * HR550-P 2,000 10,000 H5.5 * HR ,000 H6 * HR ,000 10,000 H6 * HR600-P 2,000 10,000 H6 * HR ,000 H6.5 * HR ,500 7,500 H6.5 * HR650-P 1,500 7,500 H6.5 * HR ,000 H7 * HR ,500 7,500 H7 * HR700-P 1,500 7,500 H7 * HR ,000 H7.5 * HR ,000 5,000 H7.5 * HR750-P 1,000 5,000 H7.5 * HR ,000 H8 * HR ,000 5,000 H8 * HR800-P 1,000 5,000 H8 * HR ,000 H9 * HR ,000 5,000 H9 * HR900-P 1,000 5,000 H9 * HR ,000 H10 * HR0-2 1,000 5,000 H10 * HR0-P 1,000 5,000 H10 * HR ,000 H11 * HR1-2 1,000 5,000 H11 * HR1-P 1,000 5,000 H11 * HR ,000 H13 * HR ,000 5,000 H13 * HR1300-P 1,000 5,000 H13 * HR ,000 H14 * HR ,000 5,000 H14 * HR1400-P 1,000 5,000 H14 * HR ,000 H15 * HR ,000 5,000 H15 * HR1500-P 1,000 5,000 H15 * H (HighTemperature) Radial-leaded ag Quantity Tape & Reel Quantity mmo Pack Quantity H , * H , * H , * H ,000 3 * H ,000 5 * H , * H , * * These devices have been designed for use in automotive applications. or commercial alternatives to these product series please see the radial-leaded devices section or surface-mount devices section. Standard Package Quantity Part Marking gency Recognition 192 RoHS ompliant, LV ompliant

21 HS (HighTemperature) Surface-mount HS ,000 20,000 H (0.18) 1.5 (0.06) 3.4 (0.134) * HS160 1,500 7, (0.18) 2.3 (0.09) 6.1 (0.240) * HS200 1,500 7,500 H (0.18) 2.3 (0.09) 6.1 (0.240) * HS300 1,500 7,500 H (0.18) 2.3 (0.09) 6.1 (0.240) * SM Surface-mount SM030 2,000 10, (0.) 2.3 (0.09) 5.1 (0.201) * SM050 2,000 10, (0.) 2.3 (0.09) 5.1 (0.201) * SM075 2,000 10, (0.) 2.3 (0.09) 5.1 (0.201) * SM 2,000 10, (0.) 2.3 (0.09) 5.1 (0.201) * SM5 2,000 10, (0.) 2.3 (0.09) 5.1 (0.201) * SM150 1,500 7, (0.18) 2.3 (0.09) 6.1 (0.240) * SM185 1,500 7, (0.18) 2.3 (0.09) 6.1 (0.240) * Table 6 Packaging and Marking Information for utomotive evices Part Number SM200 1,500 7, (0.18) 2.3 (0.09) 6.1 (0.240) * SM250 1,500 7, (0.18) 2.3 (0.09) 6.1 (0.240) * nanosm Surface-mount nanosm0 3,000 15,000 P 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) * nanosm016 3,000 15,000 N 1.60 (0.063) 1.00 (0.039) 2.00 (0.079) * nanosm020 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) * nanosm035 3,000 15, (0.063) 1.00 (0.039) 2.00 (0.079) * microsm Surface-mount microsm005 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) * microsm010 4,000 20, (0.098) 1.00 (0.039) 2.00 (0.079) * minism Surface-mount Tape & Reel Quantity Standard Package Quantity Part Marking Recommended Pad Layouts [mm(in) See igure 25] imension (Min.*/Nom.) imension (Nom.) minism010 2,000 10, (0.4) 1.68 (0.066) 3.10 (0.2) * minism014 2,000 10, (0.4) 1.68 (0.066) 3.10 (0.2) * minism020 2,000 10, (0.4) 1.68 (0.066) 3.10 (0.2) * minism030 2,000 10, (0.4) 1.68 (0.066) 3.10 (0.2) * minism050 2,000 10, (0.4) 1.68 (0.066) 3.10 (0.2) * minism075/24 1,500 7, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * minism110/16 2,000 10, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * minism110/24 1,500 7, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * minism5/16 2,000 10, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * minism150/16 2,000 10, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * minism150/24 1,000 5, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * minism260/16 1,500 7, V 3.15 (0.4) 1.68 (0.066) 3.10 (0.2) * * These devices have been designed for use in automotive applications. or commercial alternatives to these product series please see the radial-leaded devices section or surface-mount devices section. imension (Nom.) gency Recognition PolySwitch Resettable evices utomotive evices Part Number laded evice ag Quantity Standard Package Quantity Part Marking gency Recognition / * / * / * /16-W * /16-W * * These devices have been designed for use in automotive applications. or commercial alternatives to these product series please see the radial-leaded devices section or surface-mount devices section. RoHS ompliant, LV ompliant 193

22 igure 25 Recommended Pad Layout for utomotive evices Table 7 Tape and Reel Specifications for GR/HR/H utomotive evices GR, HR and H devices are available in tape and reel packaging per I468-/I286-2 and I standards. See igures 26 and 27 for details. escription I Mark imension (mm) Tolerance arrier tape width W /+1.0 Hold down tape width W Minimum Top distance between tape edges W Maximum Sprocket hole position W /+0.75 Sprocket hole diameter ±0.2 bscissa to plane H ±0.5 bscissa to top (GR400 to GR600, HR050 to HR450, H050 to H300) H Maximum bscissa to top (GR700 to GR1400, HR550 to HR1500*, H500 to H0) H Maximum Overall width with lead protrusion (GR400 to GR600 & HR050 to HR450, H050 to H300) Maximum Overall width with lead protrusion (GR700 to GR1400, HR550 to HR1500, H500 to H0) Maximum Overall width without lead protrusion Maximum (GR400 to GR600, HR050 to HR450, H050 to H300) Overall width without lead protrusion Maximum (GR700 to GR1400, HR550 to HR1500, H500 to H0) Lead protrusion L Maximum Protrusion of cut-out L 11.0 Maximum Protrusion beyond hold-down tape I 2 Not specified Sprocket hole pitch P 0.7 ± 0.3 evice pitch (GR400 to GR700, HR050 to HR600, H050 to H300).7 ± 0.3 evice pitch (GR800 to GR1400, HR650 to HR1500, H500 to H0) 25.4 ± 0.6 Pitch tolerance 20 consec. ± 0.1 Tape thickness t 0.9 Maximum Overall tape and lead thickness (GR400 to GR1, HR050 to HR1*, H050 to H750) t Maximum Overall tape and lead thickness (GR00 to GR1400, HR1300 to HR1500*, H0) t Maximum Splice sprocket hole alignment 0 ± 0.3 ody lateral deviation h 0 ± 1.0 ody tape plane deviation p 0 ± 1.3 Ordinate to adjacent component lead P ± 0.7 (GR400 to GR1, HR050 to HR900, H050 to H500) Ordinate to adjacent component lead P ± 0.7 (GR00 to GR1400, HR0 to HR1500, H750 to H0) Lead spacing (GR400 to GR1, HR050 to HR900*, H050 to H500) 5.05 ± 0.75 Lead spacing (GR00 to GR1400, HR0 to HR1500*, H750 to H0) ± 0.75 Reel width (GR400 to GR600 & HR050 to HR450, H050 to H300) w Maximum Reel width (GR700 to GR1400, HR550 to HR1500*, H500 to H0) w Maximum Reel diameter a Maximum Space between flanges* (H050 to H300) w Maximum Space between flanges* (H500 to H0) w Maximum rbor hold diameter c 26.0 ±.0 ore diameter* n 91.0 Maximum ox 64/372/362 Maximum onsecutive missing places None mpty places per reel 0.1% Maximum *iffers from I specification. 194 RoHS ompliant, LV ompliant

23 igure 26 I Referenced Taped omponent imensions for GR/HR/H utomotive evices h h p p Reference plane H 1 P 1 H 1 2 H 1 L H 0 W 5 W 4 W I 2 L 1 P 0 0 irection of unreeling ross section - t igure 27 I Referenced Reel imensions for GR/HR/H utomotive evices Reel Upper side n Type PolySwitch Resettable evices utomotive evices a irection of unreeling c Lower side w 1 w 2 ross section Optional shape: ircular or polygonal Table 8 Tape and Reel Specifications for HS/SM/nanoSM/microSM/miniSM utomotive evices (in Millimeters) HS160~HS300 nanosm microsm minism HS SM030~SM5 SM150~SM250 escription I I I I I I W 8.0 ± ± ± ± ± ± 0.30 P ± ± ± ± ± ± 0.10 P ± ± ± ± ± ± 0.10 P ± ± ± ± ± ± ± ± 0.10 Table ± ± ± Table ± 0.10 Table ± ± ± max ± ± / / / / ± ± ± ± ± ± ± ± ± ± ± ± min T max T 1 max K 0 Table ± 0.1 Table ± ± ± 0.15 Leader min Trailer min RoHS ompliant, LV ompliant 195

24 Table 9 escription Tape and Reel Specifications for nanosm/minism utomotive evices (in Millimeters) nanosm020 nanosm035 nanosm0 nanosm016 minism010~050 minism110/16 minism5/16 minism150/16 minism075/24 minism110/24 minism260/16 minism150/ ± ± ± ± ± / ± ± ± ± 0.1 K ± ± ± ± ± 0.1 Table 10 Reel imensions for HS/SM/nanoSM/microSM/miniSM utomotive evices (in Millimeters) nanosm HS escription microsm minism SM max N min W / / /-.00 W 2 max igure 28 I Referenced Taped omponent imensions for HS/SM/nanoSM/microSM/miniSM utomotive evices P 0 mbossment T 0 P 2 over tape 1 0 W 2 1 K 0 0 T 1 enter lines of cavity P 1 igure 29 I Referenced Reel imensions for HS/SM/nanoSM/microSM/miniSM utomotive evices W 2 (measured at hub) over tape N (hub dia.) arrier tape W 1 (measured at hub) mbossed cavity 196 RoHS ompliant, LV ompliant

25 Part Numbering System for utomotive evices GR HS /16 Packaging option (lank) = ulk 2 = Tape and reel packaging P = mmo pack Hold urrent Indicator Product Series n at the end of the series indicates Pb-free version of product Packaging 2 = Tape and reel Hold urrent Indicator Product Series Rating urrent / Maximum Operating Voltage 10 = Rating current (hold current of device is 70%~80% of rating current) 16 = Max operating voltage is 16V (nominal operating voltage of device is 14V) Typical ap s Size PolySwitch Resettable evices utomotive evices Product Series Warning : Users should independently evaluate the suitability of and test each product selected for their own application. Operation beyond the maximum ratings or improper use may result in device damage and possible electrical arcing and flame. These devices are intended for protection against damage caused by occasional overcurrent or overtemperature fault conditions and should not be used when repeated fault conditions or prolonged trip events are anticipated. ontamination of the PPT material with certain silicone-based oils or some aggressive solvents can adversely impact the performance of the devices. evice performance can be impacted negatively if devices are handled in a manner inconsistent with recommended electronic, thermal, and mechanical procedures for electronic components. PPT devices are not recommended for installation in applications where the device is constrained such that its PT properties are inhibited, for example in rigid potting materials or in rigid housings, which lack adequate clearance to accommodate device expansion. Operation in circuits with a large inductance can generate a circuit voltage (Ldi/dt) above the rated voltage of the device. RoHS ompliant, LV ompliant 197

26 198