Pole Fuse Switch Disconnectors

Size: px

Start display at page:

Download "Pole Fuse Switch Disconnectors"

Felicity Reynolds
6 years ago
Views:

Pole fuse switches are easy to use as they can be operated from the round by usin a rod.

1 34 Pole Fuse Switch Disconnectors Pole fuse switch disconnectors are used for protectin low-voltae networks. They combine the functions of a fuse, a switch and a disconnector. Pole fuse switches are easy to use as they can be operated from the round by usin a rod. They are also reliable and work for decades even in the most severe conditions. Their reliability and safety has been proved in numerous tests in accordance with IEC and national standards. We manufacture 160 A and 400 A pole fuse switches.

35 4x50 mm 2 4x95 mm 2 300 m 500m 4x95 mm 2 4x95 mm 2 500 m 500m Protection of an outoin

Sectionalisin, decreased cross-section Sectionalisin, short circuit protection Rin main 4x95

temporary consumer Protection between bare conductors and insulated overhead cables or

switches is AC 22B 160 A 415 V accordin to IEC 60947-3/EN 60947-3 and the size of the fuse

Pole fuse switches SZ 151 and SZ 152 These pole fuse switches include separate terminal

Poles mm 2 included pcs SZ 151 6418677405884 3 Al 2x(16-120) or Cu 2 x(10-95) 6 x KG 71 4200

01 6418677405907 3 + PEN Al 2x(16-120) 6 x KG 41 + 1 x KG 71 4200 1 connector SZ 152.

SZ 156 These pole fuse switches include separate terminal N-pole is permanently connected.

2 35 4x50 mm 2 4x95 mm m 500m 4x95 mm 2 4x95 mm m 500m Protection of an outoin feeder in a transformer substation. Sectionalisin, decreased cross-section Sectionalisin, short circuit protection Rin main 4x95 mm 2 Cu 4x25 mm 2 4x25 mm 2 4x25 mm 2 Protection of a consumer feeder Connection of a temporary consumer Protection between bare conductors and insulated overhead cables or underround cable Pole fuse switch disconnectors 160 A 415 V The ratin of the pole fuse switches is AC 22B 160 A 415 V accordin to IEC /EN and the size of the fuse link is 00 (IEC A). The fuse switches can be supplied with a choice of connectors. Also available without connectors. Pole switches can be operated from the round level by usin operatin rod ST 33. Pole fuse switches SZ 151 and SZ 152 These pole fuse switches include separate terminal covers for in-comin and out-oin conductors, thus makin installation safer. Poles mm 2 included pcs SZ Al 2x(16-120) or Cu 2 x(10-95) 6 x KG SZ Al 2x(16-120) 6 x KG SZ PEN Al 2x(16-120) 6 x KG x KG connector SZ Al (16-120) and Cu (6-35) 6 x KG Pole fuse switches SZ 157 and SZ 156 These pole fuse switches include separate terminal covers for in-comin and out-oin conductors, thus makin installation safer. N-pole is permanently connected. Poles mm 2 included pcs SZ N Al 2x(16-120) or Cu 2 x(10-95) 8 x KG SZ N Al 2x(16-120) 8 x KG SZ N Al (16-120) and Cu (6-35) 8x KG

36 Pole fuse switch SZ 51 The plastic covers separate different phases from each other, thus in-comin and out-oin terminals are under same cover.

1 The plastic covers separate different phases from each other, thus in-comin and out-oin terminals are under same cover. N-pole is permanently connected.

1 6418677406065 4 Al 2x(16-120) 8 x KG 41 5200 1 Pole fuse switch SZ 50.1 For protectin stranded overhead cables and underround cables in LV networks.

1 6418677406027 1 Al 2x(16-120) 2 x KG 41 1600 1 Connectors for 160 A pole fuse switches: KG 41, KG 44 and KG 71 Pole fuse switches can be supplied with or without

EAn conductors weiht Packae mm 2 pcs KG 41 6418677400230 Al 2x(16-120) 160 50 KG 44 6418677400261 Al (16-120) / Cu (6-35) 175 50 KG 71 6418677400322 Al 2x(16-120) or Cu

outoin conductors, thus makin installation safer. The plastic covers of SZ 51 and SZ 56 can be replaced by terminal cover sets SP 42.

3 36 Pole fuse switch SZ 51 The plastic covers separate different phases from each other, thus in-comin and out-oin terminals are under same cover. Poles mm 2 included pcs SZ Al 2x(16-120) 6 x KG Pole fuse switches SZ 56 and SZ 56.1 The plastic covers separate different phases from each other, thus in-comin and out-oin terminals are under same cover. N-pole is permanently connected. The fourth pole is opened and closed toether with the other phase-poles. of poles mm 2 included pcs SZ N Al 2x(16-120) 8 x KG SZ Al 2x(16-120) 8 x KG Pole fuse switch SZ 50.1 For protectin stranded overhead cables and underround cables in LV networks. of poles mm 2 included pcs SZ Al 2x(16-120) 2 x KG Connectors for 160 A pole fuse switches: KG 41, KG 44 and KG 71 Pole fuse switches can be supplied with or without connectors: - KG 41 for Al conductors, - KG 71 insulation piercin connector - KG 44 for Al/Cu conductors, for both Al and Cu conductors Cat.No. EAn conductors weiht Packae mm 2 pcs KG Al 2x(16-120) KG Al (16-120) / Cu (6-35) KG Al 2x(16-120) or Cu 2x(10-95) Terminal cover sets SP 42 for 160 A pole fuse switches Pole fuse switches SZ 151, 152, 157 and 156 include separate terminal covers for in-comin and outoin conductors, thus makin installation safer. The plastic covers of SZ 51 and SZ 56 can be replaced by terminal cover sets SP 42. The set SP 42 consists of 2 terminal covers and 3 middle covers. Cat.No. ean weiht Packae pcs SP Pole fuse switch disconnectors 400 A 500 V SZ 41 The ratin of the pole fuse switches is AC 22B 400A 500V accordin to IEC /EN and the size of the fuse link is 2 (IEC A). The fuse switches can be supplied with a choice of connectors. Also available without connectors. of poles mm 2 included pcs SZ Al 2x(50-240) 6 x KG

37 Pole fuse switches SZ 46 and SZ 46.1 N-pole is permanently connected. The fourth pole is opened and closed toether with the other phase-poles. Cat.No.

1 6418677406010 4 Al 2x(50-240) 8 x KG 43 11800 1 Connectors for 400 A pole fuse switches: KG 43, KG 43.6, KG 36 and KG 20 Pole fuse switches SZ 41, SZ 46 and SZ 46.

EAn conductors weiht Packae mm 2 pcs KG 43 6418677400254 Al 2x(50-240) 320 25 KG 43.

consists of an aluminium fastenin bar and plastic number plates. The heiht of the numbers is 40 mm. We have a wide selection of numberplates, here are few exemples. Cat.No.

1 Number plate: 65x60x1.5 7 PEM 241.6 = No. 6 Tap-off Multi-bracket PEK 49 Used for the attachment of pole fuse switches to steel, concrete and wooden poles by screw or band fixin.

1 Used for the attachment of several 160 A and 400 A pole fuse switches to the same pole. PEK 43.1 can also be used for sure arresters. Cat.No.

4 37 Pole fuse switches SZ 46 and SZ 46.1 N-pole is permanently connected. The fourth pole is opened and closed toether with the other phase-poles. Cat.No. EAn number of Conductors Connectors Weiht Packae of poles mm 2 included pcs SZ N Al 2x(50-240) 8 x KG SZ Al 2x(50-240) 8 x KG Connectors for 400 A pole fuse switches: KG 43, KG 43.6, KG 36 and KG 20 Pole fuse switches SZ 41, SZ 46 and SZ 46.1 are equipped with Al-connectors KG 43. The connectors can be replaced with Al/Cu-connectors KG 36 or tin-plated Al/Cu-connector KG 43.6 or Cu-connectors KG 20. Cat.No. EAn conductors weiht Packae mm 2 pcs KG Al 2x(50-240) KG Al /Cu 2 x (50 240) KG Al /Cu KG Cu Markin sets for pole fuse switches The markin set consists of an aluminium fastenin bar and plastic number plates. The heiht of the numbers is 40 mm. We have a wide selection of numberplates, here are few exemples. Cat.No. ean Description size weiht mm PEM Fastenin bar 250x30x3 120 PEM = 25 A Number plate: 145x60x PEM = 400 A Fuse size PEM = No. 1 Number plate: 65x60x1.5 7 PEM = No. 6 Tap-off Multi-bracket PEK 49 Used for the attachment of pole fuse switches to steel, concrete and wooden poles by screw or band fixin. Cat.No. ean for pole fuse weiht Packae switches pcs PEK A and 400 A Mountin racks PEK 43 and PEK 43.1 Used for the attachment of several 160 A and 400 A pole fuse switches to the same pole. PEK 43.1 can also be used for sure arresters. Cat.No. ean for pole fuse switches, weiht Packae examples pcs PEK x160 A pole fuse switch or x160 A switch + 2x400 A switch PEK x160 A switch + 2x400 A switch Mountin racks PEK 41 and PEK 42 Used for the attachment of two pole fuse switches on the same pole. Cat.No. ean for pole fuse switches, weiht Packae examples pcs PEK x160 A pole fuse switches PEK x400 A switches or X 400 A switch + 1x160 A switch

38 Operatin rod ST 33 for pole fuse Pole fuse switches can be operated from the round by usin operatin rods. Cat.No. ean Lenth weiht Packae m pcs ST 33 6418677405532 2 (transport lenth 1.

By usin operatin rod, the antenna of the voltae detector is pushed into the voltae measurin openin of the fuse switch. If the fuse holder is live, the small LED is lit.

EAN Description weiht Packae pcs ST 97 6418677408670 Voltae indicator 300 1 ST 97.1 6418677408687 Voltae indicator with carryin case 400 1 ST 97.2 6418677408694 Carryin case 100 1 ST 97.

conductor insulation. Safe for direct connections to live lines. Displays a missin phase, suitable for determinin phase difference. Watertiht construction. Carryin case included. Cat.No.

5 38 Operatin rod ST 33 for pole fuse Pole fuse switches can be operated from the round by usin operatin rods. Cat.No. ean Lenth weiht Packae m pcs ST (transport lenth 1.3 ) Voltae indicator ST 97 Used for checkin the fuses of pole fuse switches, without climbin the pole and openin the fuse switch. By usin operatin rod, the antenna of the voltae detector is pushed into the voltae measurin openin of the fuse switch. If the fuse holder is live, the small LED is lit. A live conductor can also be detected by touchin the insulation of a phase conductor with the voltae indicator. Cat.No. EAN Description weiht Packae pcs ST Voltae indicator ST Voltae indicator with carryin case ST Carryin case ST Voltae indicator with buzzer Direction of rotation indicator CT 1 for 400 V lines The direction of rotation of the three-phase system can be determined without peelin the conductor insulation. Safe for direct connections to live lines. Displays a missin phase, suitable for determinin phase difference. Watertiht construction. Carryin case included. Cat.No. ean weiht Packae pcs CT Earthin devices ST and Earthin devices ST and are used for temporary earthin of the low-voltae network durin installation work by attachin the earthin device to the pole fuse switch. Suitable for 160 A pole fuse switches. Conductor included. Cat.No. EAn number of poles For pole fuse weiht Packae pcs switches psc ST SZ 51, SZ ST SZ 56, SZ 56.1,SZ

6 39

Modula Plus. Technical documentation Ver 1.01

Modula Plus. Technical documentation Ver 1.01 Modula Plus Technical documentation Ver 1.01 Table of contents Introduction Overview 2 General characteristics Main characteristics 4 Functional sements of a column 6 Main components of a functional 8