KNIPEX Quality Made in Germany. KNIPEX Tool Cases and Tool Kits

Transcription

1 KNIPEX Quality Made in Germany KNIPEX Tool Cases and Tool Kits

2 Tool Case Robust34 Electric 26 parts For the touhest operatin conditions: dust-tiht, waterproof and temperature resistant Filled with 26 branded tools for professional electricians > Fit to fly case, made from impact-resistant poly propylene > Clear, tried and tested layout > Padlock eyelets > Air pressure compensation valve > Document compartment; tool panels made of Con-Pearl with pouches that can be filled with tools > Base tray with aluminium separators, 50 x 49 x 25 > 34 litre capacity > Maximum load of 25 k 2 36 LE Case supplied without tools Con-Pearl is a reistered trademark of friedola TECH GmbH

3 With pressure valve for ventin and name plate With document compartment With shoulder strap and convenient multi-component handle With lockin mechanism by means of a padlock (padlock not included with delivery) Aluminium separators for individually dividin up the base tray Contents SB Quantity Tool Case Robust 34 Electric, 26 parts 0 KNIPEX TwinKey, for all standard cabinets and shut-off systems Knipex Nominal size Needle-Nose Combination Pliers Knipex Self-Adjustin Insulation Strippers Knipex Pliers for Electrical Installation Knipex SB KNIPEX EroStrip, Universal Dismantlin Tool Knipex Diaonal Cutter Knipex KNIPEX Cobra, Hihtech Water Pump Pliers Knipex Self-Adjustin Crimpin Pliers for End Sleeves (ferrules), with lateral access Knipex Cable Knife Knipex VDE Kraftform Kompakt 60iS/65iS/67iS/6 (Slim) Content each: holdin handle 87 VDE; blade lenth 54 : slot 0.4 x 2.5 / 0.6 x 3.5 / 0.8 x 4.0 /.0 x 5.5; cross PH / PH 2 / PZ / PZ 2; PlusMinus PZ/S # / PZ/S # 2; TORX TX 0 / TX 5 / TX 20 / TX 25; voltae tester 0.5 x 30 x 70 Wera 635 Model 70 Electric spirit level Stabila LE Case supplied without tools 7 3

4 Tool Case Robust 45 Electric 63 parts For the touhest operatin conditions: dust-tiht, waterproof and temperature resistant Extensively filled with 63 branded tools for professional electricians Gas pressure absorber in the hine: convenient openin of the lid of the case, with no risk of injury from the case closin inadvertently > Fit to fly case, made from impact-resistant polypropylene > Clear, tried and tested layout > Can be used as trolley: with telescopic handle and wheels > Padlock eyelets > Air pressure compensation valve > Gas pressure absorber in the hine > Document compartment; tool panels made of Con-Pearl with pouches that can be filled with tools > Pneumatically cushioned lid > Base tray with aluminium separators, 609 x 428 x 263 > 45 litre capacity > Maximum load of 35 k 2 37 LE Case supplied without tools 2 37 With lare easy-roll wheels and telescopic handle for convenient transportation also on uneven round 4

5 With pressure valve for ventin and name plate With document compartment With lockin mechanism by means of a padlock Aluminium separators for individually dividin (padlock not included with delivery) up the base tray Product Hihlihts SB Quantity Tool Case Robust 45 Electric, 63 parts 50 0 KNIPEX TwinKey, for all standard cabinets and shut-off systems Knipex Needle-Nose Combination Pliers Knipex KNIPEX MultiStrip 0, Automatic Insulation Stripper Knipex 95 Nominal size Pliers for Electrical Installation Knipex KNIPEX EroStrip, Universal Dismantlin Tool Knipex Snipe Nose Side Cuttin Pliers (Stork Beak Pliers) Knipex Diaonal Cutter Knipex Hih Leverae Diaonal Cutter Knipex Pliers Wrench, pliers and a wrench in a sinle tool Knipex KNIPEX Cobra, Hihtech Water Pump Pliers Knipex Self-Adjustin Crimpin Pliers for End Sleeves (ferrules), with lateral access Knipex Cable Knife Knipex SL Screwdriver (Slim) for cross-recessed screws, Pozidriv Knipex SL Screwdriver (Slim) for slotted screws Knipex Locksmith s haer, 3 Picard SA 8 Zyklop set of metal ratchets; content each: metal ratchet Zyklop, Zyklop sockets 5-3, Zyklop extension bars with Flexible-Lock-System, Wobble-Extension, connection part with quick-chane chuck, bits in 50 lenth: PH; PZ; TORX ; hexaonal socket Wera /4" 3760 Joker open-end wrench Wera 0x VDE Kraftform Kompakt 60iS/65iS/67iS/6 (Slim) Content each: holdin handle 87 VDE; blade lenth 54 : slot 0.4 x 2.5 / 0.6 x 3.5 / 0.8 x 4.0 /.0 x 5.5; cross PH / PH 2 / PZ / PZ 2; PlusMinus PZ/S # / PZ/S # 2; TORX TX 0 / TX 5 / TX 20 / TX 25; voltae tester 0.5 x 30 x 70 Wera 85 Pocket Electric mini spirit level Stabila Model 70 Electric spirit level Stabila Electrician s Chisel Rennstei 250x LE Case supplied without tools 08 Con-Pearl is a reistered trademark of friedola TECH GmbH 5

6 KNIPEX L-BOXX Electric 65 part 2 Stron box made of impact- and shockproof ABS plastic With 4 KNIPEX tools and other brand name tools For mobile use > Equipped with 65 brand name quality tools, some VDE-tested accordin to DIN EN 609 > Several boxes can be securely joined toether > Flexible inner partitions > With two-part tool holder made of hard-wearin polyester fabric > Tool holders are connected to each other usin Velcro > Handle can be lowered into the lid to save space > Eronomically shaped handles with additional moulded recess on the side for flexible, convenient handlin > Stron box made of impact- and shock-proof ABS plastic > Dimension exterior (interior) width 442 (375) Dimension exterior (interior) heiht 5 (07) Dimension exterior (interior) depth 357 (3) Model 2 9 LB Case supplied without tools 2 9 LB E Quantity Nominal size 2 9 LB E KNIPEX L-BOXX Electric, 65 part 2 9 LB E 78 0 KNIPEX TwinKey Needle-Nose Combination Pliers MultiStrip Pliers for Electrical Installation SB KNIPEX EroStrip Snipe Nose Side Cuttin Pliers (Stork Beak Pliers) Diaonal Cutter 60 Knipex Hih Leverae Diaonal Cutter Pliers Wrench KNIPEX Cobra Hihtech Water Pump Pliers Self-Adjustin Crimpin Pliers for End Sleeves (ferrules) Cable Knife SL Screwdriver (Slim) for cross-recessed screws, Pozidriv PZ x SL Screwdriver (Slim) for slotted screws 0,6 x 3.5 x part set of VDE interchaneable blades, slim; Content each: holdin handle 87 VDE; blade lenth 54 : slot 0,4 x 2,5 / 0,6 x 3,5 / 0,8 x 4,0 /,0 x 5,5; cross PH / PH 2 / PZ / PZ 2; PlusMinus PZ/S # / PZ/S # 2; TORX TX 0 / TX 5 / TX 20 / TX 25; voltae tester 0,5 x 30 x 70 8 SA 8 Zyklop set of metal ratchets; content Wera 408 each: metal ratchet Zyklop, Zyklop sockets 5-3, Zyklop extension bars with Flexible-Lock-System, Wobble-Extension, connection part with quickchane /4" chuck, bits in 50 lenth: PH; PZ; TORX ; hexaonal socket 3760 Joker open-end wrench 0 x Locksmith s haer Picard Electrician s Chisel Rennstei 250 x Model 70 Electric spirit level 430 Stabila 7775 Pocket Electric mini spirit level LB 0866 KNIPEX L-BOXX, empty, with tool card LB WK Two-part tool holder for KNIPEX L-BOXX LB LE KNIPEX L-BOXX, empty, without tool card 22 6

7 KNIPEX L-BOXX Plumbin 52 parts 2 Stron box made of impact- and shockproof ABS plastic With 3 KNIPEX tools and other brand name tools For mobile use > Equipped with 52 brand name quality tools, some VDE tested accordin to DIN EN 609 > Several boxes can be securely joined toether > Flexible inner partitions > With two-part tool holder made of hard-wearin polyester fabric > Tool holders are connected to each other usin Velcro > Handle can be lowered into the lid to save space > Eronomically shaped handles with additional moulded recess on the side for flexible, convenient handlin > Stron box made of impact- and shock-proof ABS plastic > Dimension exterior (interior) width 442 (375) Dimension exterior (interior) heiht 5 (07) Dimension exterior (interior) depth 357 (3) 2 9 LB Case supplied without tools, with tool card 2 9 LB S Quantity Nominal size 2 9 LB S KNIPEX L-BOXX Plumbin, 52 parts 94 0 KNIPEX TwinKey Snipe Nose Side Cuttin Pliers (Stork Beak Pliers) Hih Leverae Diaonal Cutter Pliers Wrench Knipex KNIPEX Cobra Hihtech Water Pump Pliers KNIPEX Cobra XL Hihtech Water Pump Pliers Screwdrivers for slotted screws 0,6 x 3.5 x Screwdrivers for slotted screws,0 x 5.5 x Screwdriver for Torx screws TX5 x Screwdriver for Torx screws TX20 x Screwdriver for Torx screws TX25 x Screwdriver for cross recessed screws Phillips PH x Screwdriver for cross recessed screws Phillips PH2 x Electrician s Chisel Rennstei 250 x Voltae detector, sinle-pole, x 3.0 x 70 8 SA 8 Zyklop set of metal ratchets; content each: metal ratchet Zyklop, Zyklop sockets , Zyklop extension bars with Flexible-Lock-System, Wera Wobble-Extension, connection part with quickchane /4" chuck, bits in 50 lenth: PH; PZ; TORX ; hexaonal socket 3760 Joker open-end wrench 0 x Set of hex key wrenches Express key 7 x 9 Heyco M Safety cutter knife Locksmith s haer Picard Mason s Chisels Rennstei Spirit level type 70 Stabila 30 cm Metre ruler (yardstick) Picard 2 m Pipe cutter Zenten 3-35 / /8 - /2" 2 9 LB 0866 KNIPEX L-BOXX, empty, with tool card LB WK Two-part tool holder for KNIPEX L-BOXX LB LE KNIPEX L-BOXX, empty, without tool card 22 7

8 Tool Case BIG Twin Electric 65 parts 2 Hard-wearin ABS hard-shell construction with aluminium frame and circular buffer protection With 4 KNIPEX tools and other brand name tools > Equipped with 65 brand name quality tools, some VDE-tested accordin to DIN EN 609 > Hard-wearin ABS hard-shell construction with aluminium frame and circular buffer protection > Comfortable handle and mountin device for a Trolley embedded in the bottom (available orderin ref T) > Can be opened on one or both sides; bottom tray and cover can be opened independently > Stands stable in any openin position due to lid-holders and hine mechanisms on both sides, that reister in a position of 45 and 90 > 3-diit lock and two flip-locks for fixation of the cover > Removable document compartment and removable tool board, with 3 push-in compartments on one side > Base tray, heiht 58, can be subdivided by flexible inserts; cover plate with six lare push-in compartments, can be fixed by popper > Dimensions, exterior (W x H x D): 490 x 255 x 40 Dimensions, interior (W x H x D): 445 x ( ) x LE Case supplied without tools Quantity Nominal size Tool Case BIG Twin Electric, 65 part 4 0 KNIPEX TwinKey Needle-Nose Combination Pliers MultiStrip Pliers for Electrical Installation SB KNIPEX EroStrip Snipe Nose Side Cuttin Pliers (Stork Beak Pliers) Diaonal Cutter 60 Knipex Hih Leverae Diaonal Cutter Pliers Wrench KNIPEX Cobra Hihtech Water Pump Pliers Self-Adjustin Crimpin Pliers for End Sleeves (ferrules) Cable Knife SL Screwdriver (Slim) for cross-recessed screws, Pozidriv PZ x SL Screwdriver (Slim) for slotted screws 0,6 x 3.5 x part set of VDE interchaneable blades, slim* SA 8 Zyklop set of metal ratchets, 28 parts* Wera /4" 3760 Joker open-end wrench 0 x Locksmith s haer Picard Electrician s Chisel Rennstei 250 x Model 70 Electric spirit level 430 Stabila 7775 Pocket Electric mini spirit level LE Tool Case BIG Twin, empty T Trolley for rollin case transport 2 8

9 Tool Case BIG Twin Move Electric 65 parts 2 With interated rollers and telescopic handle With 4 KNIPEX tools and other brand name tools > Equipped with 65 brand name quality tools, some VDE-tested accordin to DIN EN 609 > Hard-wearin ABS hard-shell construction with aluminium frame and circular buffer protection > Pull-out handle embedded in the base and two interated smooth in-line skater runners > Can be opened on one or both sides; bottom tray and cover can be opened independently > Stands stable in any openin position due to lid-holders and hine mechanisms on both sides, that reister in a position of 45 and 90 > 3-diit lock and two flip-locks for fixation of the cover > Removable document compartment and removable tool panel with 3 tool pouches > Base tray, heiht 60, can be subdivided by flexible inserts; tool panel as cover plate with 3 tool pouches > Dimensions, external (W x H x D): 50 x 270 x 40, dimensions, interior (W x H x D): 480/445 x ( ) x 370/ LE Case supplied without tools Quantity Nominal size Tool Case BIG Twin Move Electric, 65 part KNIPEX TwinKey Needle-Nose Combination Pliers MultiStrip Pliers for Electrical Installation SB KNIPEX EroStrip Snipe Nose Side Cuttin Pliers (Stork Beak Pliers) Diaonal Cutter 60 Knipex Hih Leverae Diaonal Cutter Pliers Wrench KNIPEX Cobra Hihtech Water Pump Pliers Self-Adjustin Crimpin Pliers for End Sleeves (ferrules) Cable Knife SL Screwdriver (Slim) for cross-recessed screws, Pozidriv PZ x SL Screwdriver (Slim) for slotted screws 0,6 x 3.5 x part set of VDE interchaneable blades, slim* SA 8 Zyklop set of metal ratchets, 28 parts* Wera /4" 3760 Joker open-end wrench 0 x Locksmith s haer Picard Electrician s Chisel Rennstei 250 x Model 70 Electric spirit level 430 Stabila 7775 Pocket Electric mini spirit level LE Tool Case BIG Twin Move, empty 86 * The detailed content can be found in the table on pae 6 ( 2 9 LB E) 9

10 Tool Ba Electric 23 parts 2 > Liht desin made of hard-wearin, reinforced polyester fabric > Front additionally reinforced with aluminium brackets > Semi-fold-out front with adjustable loops and exterior document compartment > With alvanized steel base tray > With carryin handle and adjustable shoulder strap > Dimensions, interior (W x H x D): 420 x 250 x LE Case supplied without tools 2 02 EL Quantity Nominal size 2 02 EL 0895 Tool Ba Electric, 23 parts Combination Pliers Insulation Stripper Snipe Nose Side Cuttin Pliers, Radio Pliers Knipex Diaonal Cutter Cable Knife SB KNIPEX EroStrip PUK Junior Hacksaw Haunstätter 50 x Painter s spatula, wood, hih quality Maurerfreund Chippin haer Locksmith s haer Metre ruler (yardstick) Picard 2 m Flat brush Plaster bowl 27 x Mason s Chisels 3 x 29 Rennstei Electrician s Chisel 250 x Screwdrivers for slotted screws SL SL Screwdriver (Slim) for slotted screws Knipex SL 0.4 x 2.5 x x 3.5 x.0 x 5.5 x 5.2 x 6.5 x SL Screwdriver (Slim) for cross-recessed screws, PH x SL Phillips PH2 x Voltae detector, sinle-pole Wera 0.5 x 3.0 x Dismantlin Tool Knipex LE Tool Case New Classic Basic, empty

11 Tool Case Electric 20 parts 2 > Heavy duty ABS material, black > With circumferential double aluminium frame > Reister hines workin as lid holder > Stron, eronomic handle > Two flip-locks, lockable > One removable tool board in the lid with 5 push-in compartments on the bottom side and six bi push-in compartments and a clamp compartment (4 width) on the lid side, fixed by push-button > Base tray, heiht 58, can be subdivided by flexible inserts; cover plate with six lare push-in compartments, can be fixed by press button > Cover and tool plate made of Con-Pearl material > 20 k maximum load > Dimensions, exterior (W x H x D): 480 x 80 x 365 dimensions, interior (W x H x D): 45 x 60 x LE Case supplied without tools Quantity Nominal size Tool Case Electric, 20 parts Combination Pliers Self-Adjustin Insulation Stripper SB KNIPEX EroStrip Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Diaonal Cutter Hih Leverae Diaonal Cutter Pliers Wrench, pliers and a wrench in a sinle tool KNIPEX Cobra, Hihtech Water Pump Pliers Cable Shears, with twin cuttin ede 2 Knipex 0.6 x 3.5 x Screwdrivers for slotted screws SL SL Screwdriver (Slim) for slotted screws SL.2 x 6.5 x 50.0 x 5.5 x x 3.5 x SL PH x 80 Screwdriver (Slim), cross-recessed screws, Phillips SL PH2 x SL PZ x 80 Screwdriver (Slim), cross-recessed screws, Pozidriv SL PZ2 x Cable Knife Voltae detector, sinle-pole, 247 Wera 0.5 x 3.0 x LE Tool Case Standard, empty 4485 Con-Pearl is a reistered trademark of friedola TECH GmbH

12 Tool Case Electric 23 parts 2 > Contains 23 brand name quality tools, partly VDE tested accordin to DIN EN/IEC 609 > Hard-wearin ABS hard-shell construction with aluminium frame and circular buffer protection > Document compartment and pen holdin straps > One removable tool plate, with elastic loops on both sides > One cover plate with elastic loops and tool protection cloth > Lare base tray with variable separations (e.. for measurin and testin devices). Interior dimensions: 420 x 320 x 85 > Sturdy metal locks and 3-diit-lock > Stron, eronomic handle > Feet on both sides > Colour: silver / aluminium look 2 30 LE Case supplied without tools Quantity Nominal size Tool Case Electric, 23 parts KNIPEX TwinKey, for all standard cabinets and shut-off systems Combination Pliers Self-Adjustin Insulation Stripper SB KNIPEX EroStrip Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Knipex Diaonal Cutter Pliers Wrench, pliers and a wrench in a sinle tool KNIPEX Cobra, Hihtech Water Pump Pliers Precision Tweezers, insulated Screwdrivers for slotted screws 0.4 x 2.5 x SL 0.6 x 3.5 x SL 0.8 x 4.0 x Screwdriver (Slim) for slotted screws SL.0 x 5.5 x SL.2 x 6.5 x Screwdrivers for slotted screws.2 x 8.0 x Screwdriver for cross recessed screws, Phillips PH0 x SL Screwdriver (Slim) for cross-recessed screws, PH x SL Phillips PH2 x SL Screwdriver (Slim) for cross-recessed screws, PZ x SL Pozidriv PZ2 x 2 30 LE Tool Case, empty

13 Plumber s Tool Case 52 parts 2 > Stron tool case for professional use > For extensive plumbin and installation work > Equipped with 52 branded tools > Flexible options due to the individual partitionin of the inserts in the 60 deep base tray and its cover plate with six lare tool compartments > Touh ratchet hines hold the lid open where necessary despite the deadweiht of the tools > Two lockable steel flip locks protect the case contents from theft > Touh and lihtweiht, rued and distortion resistant > Dimensions, interior (W x H x D): 460 x 30 x 90 > 20 k maximum load > Rued desin made of ABS material, black > Cover and tool plates made of Con-Pearl material Con-Pearl is a reistered trademark of friedola TECH GmbH 2 2 HK S Quantity Nominal size 2 2 HK S Plumber s tool case, 52 parts Pliers Wrench, pliers and a wrench in a sinle tool KNIPEX Cobra Hihtech Water Pump Pliers KNIPEX Cobra XL Hihtech Water Pump Pliers 4 Knipex Hih Leverae Diaonal Cutter 80 Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) 2 0 KNIPEX TwinKey 60 Screwdrivers for slotted screws, 60i 0.6 x 3.5 x 620 Screwdrivers for slotted screws, 60i.0 x 5.5 x Screwdriver for Torx screws, 67i TX5 x Screwdriver for Torx screws, 67i TX20 x Screwdriver for Torx screws, 67i TX25 x Screwdriver, cross recessed, Phillips, 62i PH PH x Screwdriver, cross recessed, Phillips, 62i PH PH2 x Wera.2 x 7.0 x Slotted chisel, 932 A Slotted chisel, 932 A.6 x 9.0 x Voltae detector, sinle-pole, x 3.0 x SA 8 Zyklop set of metal ratchets, 28 parts* /4" 3760 Joker open-end wrench 0 x Set of hex key wrenches Express key 7 x 9 Heyco M Safety cutter knife Locksmith s haer Picard Mason s Chisels Rennstei Spirit level type 70 Stabila 30 cm * The detailed content can be found in the table on pae 6 ( 2 9 LB E) 3

14 Universal Tool Case 48 parts with insulated tools for works on electrical installations IEC 609 DIN EN > Hard-wearin case made of ABS material, red; equipped with a rane of KNIPEX tools for work on electrical installations, tested accordin to DIN EN/IEC 609, as well as additional protective covers, clamps and loves > Sturdy aluminium frame with D-shape rins for belt and fix, sturdy centre board with multi-purpose push-in facilities by elastic loops and twelve small pockets > Comfortable handle and mountin device for a Trolley embedded in the bottom (available orderin ref T) > Metal hines > 30 k maximum load > Can be opened on one or both sides; bottom tray and cover can be opened independently > Stands stable in any openin position due to lid-holders and hine mechanisms on both sides, that reister in a position of 45 and 90 > 3-diit lock and two flip-locks for fixation of the cover > Removable document compartment and removable tool board, with 3 push-in compartments on one side > Two flip-locks to fix the bottom > Base tray, heiht 58, can be subdivided by flexible inserts; cover plate with six lare push-in compartments, can be fixed by press button > Dimensions, exterior (W x H x D): 490 x 255 x 40 dimensions, interior (W x H x D): 445 x ( ) x T > Telescopic handle for rollin transport of tool case > Applicable for cases: 2 40 LE Tool Case BIG Twin, Universal Tool Case > Heiht adjustable handle with catch > Interated mechanism for fixation to the case, for rapid assembly and removal > With two smooth castors > Dimensions: 60 x 245 x 4 (,0) (extended) Product Hihlihts

15 2 40 T Quantity Universal Tool Case, 48 parts Combination Pliers Insulation Stripper Diaonal Cutter KNIPEX Cobra Hihtech Water Pump Pliers Cable Shears, with twin cuttin ede Open-end wrench Box Wrench Insulatin Mat, from rubber 3, x 2.5 x x 4.0 x Screwdrivers for slotted screws x 5.5 x x 6.5 x PH x 80 Screwdrivers for slotted screws, Phillips PH2 x T-Handle Drive, with drivin square /2" Reversible Ratchet, with drivin square /2" /2" /2" Extension Bar, with internal/external square /2" /2" /2" / /2" / /2" / /2" / 3 Hexaon Socket for hexaonal screws, /2" / 4 with internal square /2" /2" / /2" / /2" / /2" / Cable Knife Dismantlin Knife for round cables Insulatin Clamp, of plastic Electricians Gloves LE Universal Tool Case, empty T Trolley for rollin case transport 2 Nominal size 5

16 Tool Case Robust23 empty 2 > Fit to fly case, made from impact-resistant polypropylene > Dustproof and watertiht > Air pressure compensation valve > Temperatures ranin from 30 C to + 80 C > Padlock eyelets > Document compartment; tool panels with 35 pouches which can be filled with tools > 2 aluminium dividers to customise the bottom tray > 30 k maximum load 2 35 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (437) 90 (72) 370 (307) 48 Tool Case Robust34 empty 2 For the touhest operatin conditions: dust-tiht, waterproof and temperature resistant > Fit to fly case, made from impact-resistant polypropylene > Dustproof and watertiht > Air pressure compensation valve > Temperatures ranin from 30 C to + 80 C > Padlock eyelets > Document compartment; tool boards with 42 tool pockets and 67 straps > Lockable base tray can be individually divided usin aluminium separator system > Eronomic dual-component handle > Volume: 34 l > Load-bearin capacity up to 25 k 2 36 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (480) 25 (99) 49 (356) 7 6 Con-Pearl is a reistered trademark of friedola TECH GmbH

17 Tool Case Robust45 empty 2 For the touhest operatin conditions: dust-tiht, waterproof and temperature resistant > Fit to fly case, made from impact-resistant polypropylene > Dustproof and watertiht > Air pressure compensation valve > Temperatures ranin from 30 C to + 80 C > Padlock eyelets > Document compartment; tool boards with 54 tool pockets and 94 straps > Lockable base tray can be individually divided usin aluminium separator system > Eronomic dual-component handle > With two smooth castors > With telescopic handle > Volume: 45 l > 35 k maximum load 2 37 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (540) 263 (229) 428 (364) 08 KNIPEX L-BOXX empty, with two-part tool holder 2 Stron box made of impact- and shock-proof ABS plastic For mobile use > Stron box made of impact- and shock-proof ABS plastic > Splash-proof > Several boxes can be securely joined toether > Flexible inner partitions > Handle can be lowered into the lid to save space > Eronomically shaped handles with additional moulded recess on the side for flexible, convenient handlin > With two-part tool holder made of hard-wearin polyester fabric > Tool holders are connected to each other usin hook-and-loop > Top section with 0 pockets and 0 elastic straps > Upper part of bottom section with 7 pockets and strap for hanin up the tool holder; can also be used to lift or lay the L-BOXX down > Underneath of bottom section with 7 pockets and 7 elastic straps > Load-bearin capacity up to 25 k 2 9 LB 2 9 LB LE 2 9 LB WK LB 0866 KNIPEX L-BOXX, empty, with tool card LB WK Two-part tool holder for KNIPEX L-BOXX LB LE KNIPEX L-BOXX, empty, without tool card 22 7

18 Tool Case BIG Twin-Move with interated rollers and telescopic handle, empty 2 > Heavy duty ABS material, black > All-round aluminium frame and firmly mounted sturdy centre board, each side offerin multi-purpose push-in facilities by elastic loops and 2 small pockets > Pull-out handle embedded in the base and two interated smooth in-line skater runners > 30 k maximum load > Can be opened on one or both sides (V form); base tray and cover can be partially or fully opened independently of each other; stands securely in all openin positions; the special runners are entle on the floor and ensure stability > Lockable > Removable document compartment and removable tool panel with 3 tool pouches > Base tray, heiht 60, can be subdivided by flexible inserts; tool panel as cover plate with 3 tool pouches 2 4 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (480/445) 270 (05) 40 (370/330) 86 8

19 Tool Case BIG Twin empty LE > Heavy duty ABS material, black > Sturdy aluminium frame with D-shape rins for belt and fix, sturdy centre board with multi-purpose push-in facilities by elastic loops and twelve small pockets > Comfortable handle and mountin device for a Trolley embedded in the bottom (available orderin ref T) > Metal hines > 30 k maximum load > Can be opened on one or both sides; bottom tray and cover can be opened independently > Stands stable in any openin position due to lid-holders and hine mechanisms on both sides, that reister in a position of 45 and 90 > 3-diit lock and two flip-locks for fixation of the cover > Removable document compartment and removable tool board, with 3 push-in compartments on one side > Two flip-locks to fix the bottom > Base tray, heiht 58, can be subdivided by flexible inserts; cover plate with six lare push-in compartments, can be fixed by press button > Dimensions, exterior (W x H x D): 490 x 255 x 40 dimensions, interior (W x H x D): 445 x ( ) x T > Telescopic handle for rollin transport of tool case > Applicable for cases: 2 40 LE Tool Case BIG Twin, Universal Tool Case > Heiht adjustable handle with catch > Interated mechanism for fixation to the case, for rapid assembly and removal > With two smooth castors > Dimensions: 60 x 245 x 4 (,0) (extended) 2 40 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (445) 255 ( ) 40 (350) T Trolley for rollin case transport 2 Tool Ba empty 2 Compact tool case for the service technician > Perfectly fits in the KNIPEX BIG Twin 2 40 LE / 2 4 LE and other standard tool cases > With 8 tool pouches and 7 tool straps > Slip-throuh back strap to attach to a trolley > Compact tool case for the service technician > Made from touh polyester fabric, with zip fastener 2 LE Width Heiht Depth LE

20 Tool Case Basic empty 2 > Heavy duty ABS material, black > Circumferential aluminium frame with D-shape rins for the shoulder strap (included) > 3-diit lock and two flip-locks for fixation of the cover > Stron, eronomic handle > Metal hines > Lid holder with hine-joint mechanism > Document compartment in the cover > Removable tool board in the lid with nine push-in compartments and an elastic loop on the lid side; with ten slim and one lare push in compartments on the bottom side > Base tray, heiht 55, can be subdivided by inserts; cover plate with 2 lare push-in compartments and a flat compartment, can be fixed by press button > Load capacity: 5 k 2 05 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (440) 2 (80) 40 (350) 5680 Tool Case Standard empty 2 > Heavy duty ABS material, black > With circumferential double aluminium frame > Reister hines workin as lid holder > Stron, eronomic handle > Two flip-locks, lockable > One removable tool board in the lid with 5 push-in compartments on the bottom side and six bi push-in compartments and a clamp compartment (4 width) on the lid side, fixed by push-button > Base tray, heiht 58, can be subdivided by flexible inserts; cover plate with six lare push-in compartments, can be fixed by press button > Cover and tool plate made of Con-Pearl material > 20 k maximum load 2 20 LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE (460) 75 (70) 370 (30) Con-Pearl is a reistered trademark of friedola TECH GmbH

21 Tool and notebook ba for service technicians empty 2 > Lined inside pouch for notebook and DIN A4 documents; also DIN A4 zipped compartment > 90 fold-out front pouch with 8 tool pouches and small inside pouch > Reverse side of the front pouch with 5 tool pouches and 3 pen pouches > removeable tool panel with 8 tool pouches on the front and 2 rows of elastic loops on the back > Splash-water-protected bottom > Adjustable shoulder belt with quick-release fastener > With two carry loops > Made of hard-wearin polyester fabric 2 0 LE Width Heiht Depth LE Tool Ba New Classic Basic empty 2 > Liht desin made of hard-wearin, reinforced polyester fabric > Front additionally reinforced with aluminium brackets > Semi-fold-out front with adjustable loops and exterior document compartment > With alvanized steel base tray > With carryin handle and adjustable shoulder strap 2 02 LE Width Heiht Depth LE

22 Traditional Tool Pouch empty 2 > Made of hard-wearin polyester fabric > For tools up to approx. 450 in lenth > With document compartment on the back > With carryin handle and adjustable shoulder strap > Closin strap made of leather > Dimensions, exterior (W x H x D): 520 x 2 x 230, dimensions, interior (W x H x D): 490 x 40 x LE Dimension exterior (interior) width Dimension exterior (interior) heiht Dimension exterior (interior) depth LE Tool Ba LihtPack empty 2 > Can be opened both sides > Made from touh polyester fabric, with zip fasteners and hook and loop fastener > Tool loops inside > Plastic base tray > Steel handle with softrip > Shoulder strap (can also be used as tool belt) with small pouch for the mobile > 20 k maximum load 2 08 LE Width Heiht Depth LE

23 Tool Roll 5 parts 9 With insulated tools for works on electrical installations > Tool roll made of hard-wearin polyester fabric > With practical, adjustable quick release fastener > Equipped with a rane of insulated KNIPEX tools for works on electrical installations Quantity Tool Roll, 5 parts Combination Pliers Insulation Stripper Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Diaonal Cutter Cable Shears, with twin cuttin ede Open-end wrench Screwdrivers for slotted screws Cable Knife LE Tool Roll, empty 325 Tool Roll parts 9 > For telecounications and electrical enineers > Tool roll made of hard-wearin polyester fabric > With practical, adjustable quick release fastener > Contains eiht pliers and three scewdrivers > Pliers with chrome plated heads and two-colour dual component handles > Screwdrivers VDE tested accordin to DIN EN/IEC 609 0V Quantity Tool Roll, parts Combination Pliers Insulation Stripper Snipe Nose Side Cuttin Pliers, (Radio Pliers) Lon Nose Pliers Flat Nose Pliers, (Needle-Nose Pliers) Hih Leverae End Cuttin Nipper Diaonal Cutter Screwdrivers for slotted screws Screwdrivers for slotted screws, Phillips 9 4 LE Tool Roll, empty

24 Set of Pliers Wrenches 5 parts 9 > Tool roll made of hard-wearin polyester fabric > With hook and loop fastener > Fitted with each of / 50 / 80 / 250 / S Quantity 9 55 S Set of Pliers Wrenches Pliers Wrench, pliers and a wrench in a sinle tool S4 LE Tool Roll for Pliers Wrench, empty 260 Cobra Set 5 parts 9 > Tool roll made of hard-wearin polyester fabric > With hook and loop fastener > Equipped with each of / 50 / 80 / 250 / S S5 LE Quantity 9 55 S Cobra -Set KNIPEX Cobra Hihtech Water Pump Pliers S5 LE Tool Roll for KNIPEX Cobra, empty

25 Mini pliers sets in belt tool pouch, 2 parts 20 > Tool ba made of touh polyester fabric, with velcro fastenin and belt loop > Attractive cardboard packain with Euro standard perforation > Dimensions (W x H x D): 70 x 70 x V V V V Quantity V Mini pliers sets in belt tool pouch, 2 parts KNIPEX Pliers Wrench, pliers and a wrench in a sinle tool KNIPEX Cobra, Hihtech Water Pump Pliers V Mini pliers sets in belt tool pouch, 2 parts Hih Leverae Diaonal Cutter KNIPEX Cobra, Hihtech Water Pump Pliers V Mini pliers sets in belt tool pouch, 2 parts KNIPEX Pliers Wrench, pliers and a wrench in a sinle tool KNIPEX Cobra, Hihtech Water Pump Pliers V Mini pliers sets in belt tool pouch, 2 parts Needle-Nose Combination Pliers KNIPEX Cobra, Hihtech Water Pump Pliers 9 72 LE 0709 Belt Pouch for two pliers Belt Pouch for two pliers 9 Belt Tool Pouch empty 9 > For two pliers up to 50 lenth > Made of hard-wearin polyester fabric > With hook and loop fastener > With elastic side holder for small flash lamp, pen or suchlike > With practical belt loop > Made of hard-wearin polyester fabric and leather > With pockets for up to 8 tools > Tool loops made of leather, riveted > With snap hook 9 72 LE 9 73 LE Width Heiht Depth LE Width Heiht Depth LE

26 Compact-Box 4 parts with VDE tools 20 > Hih quality, versatile, shock-resistant plastic case > Foam insert with honeycomb structure for variable equipment > Dimensions, exterior (W x H x D): 327 x 65 x All pliers VDE tested accordin to DIN EN/IEC 609 0V, pliers finish LE Without tools Quantity Compact-Box, 4 parts Combination Pliers Insulation Stripper Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Diaonal Cutter 2 5 LE Tool Box, empty 530 Tool Box 7 parts for electrical contractors 2 > Hih quality, versatile, shock-resistant plastic case > Foam insert with honeycomb structure for variable equipment > Dimensions, exterior (W x H x D): 327 x 65 x All pliers and screwdrivers except Water Pump Pliers VDE tested accordin to DIN EN/IEC LE Without tools Quantity Nominal size Tool Box, 7 parts Combination Pliers Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Knipex Diaonal Cutter KNIPEX Alliator, Water Pump Pliers 80 6 Screwdrivers for slotted screws, 60i Wera x 2.5 x x 4.0 x 652 Screwdrivers for cross recessed Phillips screws, 62i PH PH x LE Tool Box, empty

27 Pliers Sets in a foam tray 20 > In a foam tray for workbenches and tool trolleys > Clearly oranised storae of tools > Precisely-sized recesses for holdin the pliers > Foam tray dimensions (W x H x D): 335 x 65 x 33 > Material: two colour, closed pore foam 20 0 V V V V V Quantity 20 0 V Circlip Pliers Set, six precision circlip pliers in a foam tray J 48 J2 Precision Circlip Pliers, for internal circlips in bore holes J2 49 A 49 A2 Precision Circlip Pliers, for external circlips on shafts A V Circlip Pliers Set SRZ II, four precision circlip pliers in a foam tray J2 Precision Circlip Pliers, for internal circlips in bore holes J2 49 A2 Precision Circlip Pliers, for external circlips on shafts A V Pliers Set Basic, four pliers in a foam tray Combination Pliers Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Hih Leverae Diaonal Cutter KNIPEX Cobra, Hihtech Water Pump Pliers 20 0 V Pliers Set Automotive, four pliers in a foam tray Needle-Nose Combination Pliers Hih Leverae Diaonal Cutter Lon Reach Needle Nose Pliers, with transverse profiles V Pliers Set Basic Chrom, four pliers in a foam tray Combination Pliers Snipe Nose Side Cuttin Pliers, (Stork Beak Pliers) Hih Leverae Diaonal Cutter KNIPEX Cobra, Hihtech Water Pump Pliers 27

28 Electronics Pliers Sets for workin on electronic components parts, contains 6 electronics pliers and one pair of precision tweezers; Case made of hard-wearin polyester fabric, pliers are held by elastic band, zippered 20 6 P 6 parts, contains 6 precision electronics pliers; Case made of hard-wearin polyester fabric, pliers are held by elastic band, zippered 20 6 P ESD 6 parts, contains 6 ESD precision electronics pliers, electrically discharin version; Case made of hard-wearin polyester fabric, pliers are held by elastic band, zippered P 20 6 P ESD Contents / / / / / / P / / / / / / P ESD ESD / ESD / ESD / ESD / ESD / ESD

29 Precision Circlip Pliers Set 8 parts 2 > Hih-quality, impact-resistant plastic case > Contains coon Precision Circlip Pliers for hihest requirements > Precisely-sized recesses for holdin the pliers > Clearly oranised storae of tools > Dimensions, exterior (W x H x D): 260 x 80 x Style Capacity Ø Tips Ø Quantity Precision Circlip Pliers Set, 8 parts J Precision Circlip Pliers, J2 for internal circlips in bore holes straiht A Precision Circlip Pliers, tips A2 for external circlips on shafts J Precision Circlip Pliers, J2 for internal circlips in bore holes bent tips 49 2 A Precision Circlip Pliers, A2 for external circlips on shafts

30 Set of Circlip Pliers 4 parts 9 > Tool roll made of hard-wearin polyester fabric > With practical, adjustable quick release fastener V V Style Capacity Ø Tips Ø Quantity Set of Circlip Pliers, 4 parts J2 Circlip Pliers, straiht tips J2 for internal circlips in bore holes bent tips A2 Circlip Pliers, straiht tips A2 for external circlips on shafts bent tips V J Circlip Pliers, J2 for internal circlips in bore holes straiht tips 46 A Circlip Pliers, A2 for external circlips on shafts Precision Circlip Pliers Set, 4 parts J Precision Circlip Pliers, J2 for internal circlips in bore holes straiht tips 49 A Precision Circlip Pliers, A2 for external circlips on shafts V J2 Precision Circlip Pliers, straiht tips J2 for internal circlips in bore holes bent tips A2 Precision Circlip Pliers, straiht tips A2 for external circlips on shafts bent tips LE Tool Roll, 4 parts, empty 7 30

31 Set of Circlip Pliers 8 parts 9 > Tool roll made of hard-wearin polyester fabric > With practical, adjustable quick release fastener 9 57 V V Style Capacity Ø Tips Ø Quantity 9 58 V Set of Circlip Pliers, 8 parts J straiht tips 44 J2 Circlip Pliers, J for internal circlips in bore holes bent tips J A straiht tips 46 A2 Circlip Pliers, A for external circlips on shafts bent tips A V Precision Circlip Pliers Set, 8 parts J straiht tips 48 J2 Precision Circlip Pliers, J for internal circlips in bore holes bent tips 48 2 J A straiht tips 49 A2 Precision Circlip Pliers, A for external circlips on shafts bent tips 49 2 A LE Tool Roll, 8 parts, empty 28 3

32 KNIPEX-Werk C. Gustav Putsch KG Wuppertal Germany Tel.: +49 (0) Fax: +49 (0) L EN/0/05.8/5.0