STANDARDISED MOUNTINGS
|
|
- Brent Park
- 6 years ago
- Views:
Transcription
1 STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO FNOR NF ISO DIN ISO STNDRDS B C pplications duty Construction low feet (2) MS1 i For cylinders PES serie 450 high foot (1) NFE MS3 rectangular front or rear flange MF1 - MF2 European patent n for PES 453 with profiled barrel supplied supplied loose fixed (3) (4) centre trunnion MT4 for PES 453 for PES with with profiled barrel tie rods supplied supplied supplied fixed/ (3) loose (4) fixed / (3) for PLS 452 with profiled barrel supplied supplied fixed / (3) fixed / (3) supports (2) for centre trunnion T4 standard duty heavy duty stamped sheet steel drawn steel steel steel steel + bush luminium for cylinder catalogue number * * * dimensions page 20 page 20 page 19 page 23 page 23 page 23 page 24 application duty construction i For cylinders PES serie 450 cap, detachable clevis MP2 (1) High foot sold individually (2) Corresponds to a set of 2 parts. (3) Trunnion supplied fixed to the barrel at dimension specified when ordered: The centre trunnion code fixed and the dimension along with orientation code of the trunnion with respect to the ports must be added to the cylinder code. (example: options / ) (4) Trunnion supplied loose on cylinder barrel for on-site adjustment to required dimension: The centre trunnion code loose and the dimension along with orientation code of the trunnion with respect to the ports must be added to the cylinder code NOTE: With the exception of the centre trunnion, mountings are delivered separately. cap, detachable eye (trunnion) MP4 angular clevis bracket B3 standard duty heavy duty aluminium + steel light alloy aluminium for cylinder catalogue number * * * dimensions page 21 page 21 page 21 P Centre trunnion orientation Trunnion axis is perpendicular to supply ports, code : (standard orientation) other position upon request, code : GB-2011/R03
2 ISO FNOR NF ISO DIN ISO STNDRDISED MOUNTINGS application duty cap clevis for spherical eye or clevis bracket B6 cap eye with spherical eye (5) MP6 angular clevis bracket spherical bearing (5) B5 femelle rod clevis (7) ISO RP102P P2 spherical rod end ISO8139-RP103P P6 alignement compensator (6) standard heavy Construction forged steel forged steel forged steel steel steel steel for cylinder catalogue number * * * dimensions page 22 page 22 page 22 page 23 page 23 page 24 B * For cylinders PES serie 450 (5) These accessories allows accurate angular compensation adjustment spherical of 4 (6) This accessorie allows accurate angular compensation adjustment spherical of 4 and radial of 0,7 mm (7) 125 to 200 mm: Clevis with axis locking pin NOTE: With the exception of the centre trunnion, mountings are delivered separetely. rectangular FRONT OR RER MOUNTING NGE - MF1 - MF2 PES-PLS type CYLINDER ZF + 1 W MF D H11 R 4 FB TF D E FB MF R TF UF W ZJ ZF UF , , , , , , , , ,330 P229-19
3 ISO FNOR NF ISO DIN ISO STNDRDISED MOUNTINGS LOW FEET MOUNTING - MS1 X + 1 PES-PLS type CYLINDER T 2 B H U L8 + 1 S + 1 U T O TR HIGH FOOT MOUNTING - ms3 (sold individually) X + 1 PES-PLS type CYLINDER T1 US H 2øB H UF U L8 + 1 S + 1 U O T1 TR B O H T T1 U E TR UF US L8 S X 2 x 1 x MS1 MS , ,150 0, ,190 0, , ,395 0, , ,445 0, ,790 1, , , , , , , ,900 - P229-20
4 ISO FNOR NF ISO DIN ISO STNDRDISED MOUNTINGS CP, DETCHBLE CLEVIS MOUNTING - MP2 Bore Light alloy 0,105 0,150 0,240 0,370 0,635 0, Cast iron+steel 0,205 0,305 0,430 0,685 1,375 2,100 3,570 6,660 9,890 CP, DETCHBLE EYE (trunnion) MOUNTING - MP4 Bore luminium Light alloy 0,085 0,092 0,170 0,250 0,445 0, Cast iron+steel 0,210 0,230 0,430 0,620 1,110 1,700 3,100 5,220 7,780 E CB H14 UB h14 Y EW MR CD H9/e8 MR CD H9 B S T R I G H T C O M P L E T E T RU N N I O N M O U N T I N G WITH OR WITHOUT BUSH - MP2 + MP4 To achieve the complete assembly, items MP2 and MP4 must be ordered separately. Bore Light alloy 0,190 0,240 0,410 0,620 1,080 1, Cast iron+steel 0,415 0,535 0,860 1,305 2,485 3,800 6,670 11,880 17,670 Y 4 D CD H9/e8 L4 COMPLETE TRUNNION MOUNTING WITH NGULR CLEVIS BRCKET - WITH OR WITHOUT BUSH - MP2 + B3 This set includes the cap, detachable clevis MP2 and the angular clevis bracket B3, with or without bush. These mountings must be ordered separately Bore Light alloy 0,160 0,230 0,390 0,570 0,950 1,500 -MN 60 PES-PLS CYLINDER XD + 1 Bore XD (PES-PLS cyl.) Y 20 CK H9/e8 EM 4 HB GL Js14 R UR BT CB CD D E EM EW GL HB L4 CK L5 MR PH R TE UB UL UR Y , ,6 5,5 1, , , ,6 5,5 1, ,5 1, , ,5 1, , , , , L5 BT TE PH Js15 UL P229-21
5 CP, DETCHBLE CLEVIS MOUNTING - FOR SPHERICL EYE (STRIGHT) OR NGULR CLEVIS BRCKET - B6 ISO FNOR NF ISO DIN ISO STNDRDISED MOUNTINGS CG D10 FM Bore Forged steel 0,190 0,300 0,460 0'680 1,460 2,130 4, SR CP CF F7/h9 CP, DETCHBLE EYE MOUNTING WITH SPHERICL BERING - MP6 Bore Forged steel 0,180 0,290 0,420 0,650 1,210 1,870 3, E + EX - 0,1 DL MS CX H7 STRIGHT COMPLETE TRUNNION MOUNTING, SPHERICL BERING This set includes the cap B6, clevis for spherical eye and the cap, eye with spherical bearing MP6. These mountings must be ordered separately EP 4 D FM DL Bore Forged steel 0,370 0,590 0,880 1,330 2,670 4,000 7, COMPLETE TRUNNION MOUNTING WITH NGULR CLEVIS BRCKET - SPHERICL BERING This set includes the cap B6, detachable eye and the angular clevis bracket spherical eye B5. These mountings must be ordered separately Bore Forged steel 0,370 0,530 0,910 1,200 2,400 3,200 6, CF H7/h9 FM L65/1 G1 Js14 L65/2 CH Js15 PES-PLS CYLINDER XD / XN + 1 Bore XD/XN (PES-PLS cyl.) CF H7/h9 +0-0,1 EN 4 S5 G2 G3 CG CH CP CX DL CF FM E EN EX EP G1 G2 G3 K1 K2 L65/1 L65/2 MS SR S , ,5 8, ,5 11 6, ,5 8, , , , , , , , , P K1 K2
6 00578GB-2011/R02 CENTRE TRUNNION MOUNTING MT4 FOR PES 450 MT4 type C 2 2 TK1 TK2 Dimension is specified on order TD e9 E UW Dimension is specified on order CENTRE TRUNNION MOUNTING MT4 FOR PES 453-PLS 452 MT4 type B TK TD e9 (PES 453-PLS 452) MT4 type E UW TD e9 E TM h14 TL h14 TM h14 TL h14 ISO FNOR NF ISO DIN ISO15552 STNDRDISED MOUNTINGS TM h14 TL PES : Except when dimension is specified on order. the position of the trunnion may be adjusted along the unit. Consequently, the centre trunnion is not screwed on and must be adjusted after delivery. 3 : 8 locking screws 4 : Mounting of the centre trunnion by pin (option) FEMLE CLEVIS - P2 ISO RP 102 P CK H9/d10 B CM ER CL V LE CE KK mm mm without detectors MR type ILS type ➀ ➀ ,5 + ➀ ,5 + ➀ , ➀ ➀ ➀ ,5 35,5 + ➀ , ➀ 127, ➀ ,5 + ➀ ,5 102,5 + ➀ 138,5 57,5 + ➀ ➀ ,5 114,5 + ➀ 151,5 69,5 + ➀ ➀ ,5 + ➀ ,5 + ➀ , ➀ ,5 + ➀ ➀ ➀ , ➀ ➀ ➀ , ➀ ➀ ➀ 67 mm without detectors PES PLS 452 MR type ➀ ILS type ➀ 32 71,5 74,5 + ➀ ➀ ➀ , ➀ ➀ ➀ ➀ ➀ ➀ , ➀ ➀ ➀ , ➀ ➀ ➀ ➀ ➀ ➀ 48 without detectors SPHERICL BERING ROD END - P6 ISO RP 103 P EN h12 ER CN H9 PES 453 MR type LF CH X KK ILS type ➀ ➀ 32 71, ➀ 71, ➀ 50 71, ➀ ➀ ➀ ➀ , ➀ 89, ➀ 7 89, ➀ ,5 102,5 + ➀ 93,5 102,5 + ➀ 1 93,5 102,5 + ➀ ,5 114,5 + ➀ 106,5 114,5 + ➀ 2 106,5 114,5 + ➀ , ➀ 116, ➀ 0 116, ➀ 7 : spherical angular compensation 4 cylinders V-X B CE CH CK CL CM CN E EN ER KK LE LF P2 P M10x1, ,100 0, M12x1, ,150 0, M16x1, ,330 0, M16x1, ,330 0, M20x1, ,670 0, M20x1, ,670 0, M27x ,810 1, M36x ,850 1, M36x ,850 1,600 P B
7 ISO FNOR NF ISO DIN ISO15552 STNDRDISED MOUNTINGS Supports FOR CENTRE TRUNNION - T4 UL TH d4 H3 TM h14 L5 L6 CR H9 UL TH FK HB C NH FN TD C CR d4 FK FN HB H3 L5 L6 NH TH TK TK1 TK2 TL TM UL UW UW ZJ , ,6 6, , , , , , , , , , , ,5 17, , ,5 17, Centre trunnion Supports MT4 MT4 MT4 for monobloc with flanges PES 450 for for ,200 0,185 0,035 0, ,400 0,330 0,083 0, ,500 0,475 0,104 0, ,900 0,570 0,210 0, ,100 1,120 0,225 0,330 Centre trunnion Supports MT4 MT4 MT4 for monobloc with flanges PES 450 for for ,860 1,520 0,420 0, , , , , , ,030 alignment CompensatOR KW R 1 X økk P ( 2 ) økk T ( 2 ) 1 : stroke (2) : dimensions on flats W1 (2) W 2 ( 2 ) cylinders 1 P(2) KK KW R T(2) W1(2) W2(2) X radial compensation (mm) M10x1, ,7 0, M12x1, ,7 0, M16x1, , M16x1, , M20x1, , M20x1, , M27x2 13, ,700 Radial compensation: 0,5 to 1 mm (see table) Spherical angular: compensation : 4 Note: The compensator is preset with an axial clearance of 0,05 to 0,1 - Do not reset. P229-24
STANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on:
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 15552 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: 218 1 17 Voting terminates on: 218 3 14 Pneumatic fluid power Cylinders with detachable mountings, 1
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationPRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
More informationRM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationTie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationAir-Oil Systems, Inc.
Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have
More informationOur policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationPRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting
> ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationAIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
More informationISO Cylinders - P1D-B
Flange MF1/MF2 Intended for fixed mounting of cylinder. Flange can be fitted to front or rear end cover of cylinder. Materials Flange: Surface-treated steel Mounting screws acc. to DIN 6912: Zinc-plated
More informationGuide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More informationISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationP1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationLRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
More informationShort-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
More informationISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationRA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
More informationOur policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
More informationHydraulic cylinder Type CDL1
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RE 17 325/01.03 Replaces: 07.02 Hydraulic cylinder Type CDL1 Series
More informationStrokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
More informationStandard cylinders DNCB, ISO 15552
Standard cylinders DNCB, ISO 15552 Features At a glance Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E 49 003.1 and UNI 10290)
More informationSeries 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
More informationTube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationSHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationDescription. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333
CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationPRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
More informationVia Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P Pistoia Tel.0573/ Fax 0573/
TECHNICAL AND DIMENSIONAL CATALOGUE EDITION N 1-04 Via Montalbano 28 Loc.Ponte Stella, Serravalle Pistoiese C.A.P.51034 Pistoia Tel.0573/929163 Fax 0573/929190 E-mail: info@oleodinamicasabatini.it CAT-2004-I.doc
More informationCYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
More informationCartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
More informationV160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
More informationISO INTERNATIONAL STANDARD. Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 1: Medium series
INTERNATIONAL STANDARD ISO 6020-1 Third edition 2007-08-15 Hydraulic fluid power Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series Part 1: Medium series Transmissions hydrauliques Dimensions
More informationHEAVY DUTY PNEUMATIC CYLINDERS
HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationPRA/801000, PRA/803000, RA/801000, RA/ ISOLine cylinder, single acting
PR/80000, PR/80000, R/80000, R/80000 > ø 2... 00 mm > High performance adaptive cushioning system CS > High performance, stability and reliability Technical features Medium: Compressed air, filtered, lubricated
More informationISO 6020/2 industricylindre Industrial cylinders
According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,
More informationPVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
More informationHeavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH
3500/5000 psi rating Heavy Duty series XH hydraulic cylinders bulletin 0207XH www.royalcylinders.com 1 Contents Page Description 1 Contents 2 Features Description Mounting Dimensions 3 C Clevis Mount 3
More informationHYDRO-PNEUMATICS. 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series ) Hydro-Pneumatic Intensifiers for Machining Centers... 1.
HYDRO-PNEUMATICS 1) Hydro-Pneumatic Tool De-Clamp Cylinders PCS Series... 1.310 2) Hydro-Pneumatic Intensifiers for Machining Centers... 1.330 HYDRAULIC CYLINDERS 1) LH7 Series... 2.110/1 Std. Mounting
More informationISO 6022 INTERNATIONAL STANDARD. Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
INTERNATIONAL STANDARD ISO 6022 Second edition 2006-02-01 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Transmissions hydrauliques Dimensions d'interchangeabilité
More informationMulti-position cylinders/adapter kits
Multi-position cylinders/adapter kits Multi-position cylinders ADNM Product range overview Function Version Type Piston Max. stroke Piston rod With female thread With male thread Doubleacting ADNM Single-ended
More informationCYLINDERS WITH TIE RODS Ø 25 to 200 mm - double acting CNOMO AFNOR with pneumatic cushioning
CYLIDERS WITH TIE RODS 25 to 200 mm - double acting COO 06-07-02 - AFOR with pneumatic cushioning S Series 437 Type PC GEERAL Detection Equipped for magnetic position detectors Fluid Air or inert gas,
More informationStrokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More information