ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
|
|
- Allan Sharp
- 5 years ago
- Views:
Transcription
1 ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas, fi ltered, lubricated or not Operating pressure 0 bar max. Ambient temperature - 0 C to + 70 C Standards ISO CTOP RP 43 P - RP 02 P - RP 03 P Minimum pressure to compress the spring: 2 bar The return of the piston rod must be without load CONSTRUCTION arrel Rod Front and rear covers Piston Piston seals Rod nut Dismounting Cushioning Hard anodized aluminium alloy Hard chrome steel Light alloy POM (polyacetal), steel, aluminium equipped with permanent magnet PUR (polyurethane) Galvanized steel Cannot be dismounted lastic SPCIFICATIONS stroke catalogue number reference (kg) CIS 32 NA 25 SR-DM 0, CIS 32 NA 50 SR-DM 0, CIS 40 NA 25 SR-DM 0, CIS 40 NA 50 SR-DM 0, CIS 50 NA 25 SR-DM, CIS 50 NA 50 SR-DM, CIS 63 NA 25 SR-DM, CIS 63 NA 50 SR-DM,930 connection The magnetic position detectors must be ordered separately: UNI model, reed switch or magneto-resistive type (see page P295) or COMPACT model, reed switch or magneto-resistive type (see page P293) G /8 G /4 G /4 G 3/8 MOUNTINGS catalogue number Rear Front trunnion trunnion Rectangular () Female Spherical mounting mounting front or rear Feet (2) Rear male Complete rod clevis bearing rod end Neck nut (not ISO- (not ISO- fl ange trunnion trunnion ISO RP02P ISO RP03P standar- dised) dised) standar- MF - MF2 MS MP4 MP2 + (MP4) AP2 AP6 MR intégré au vérin standard () Flange delivered with a neck nut. (2) Feet delivered in batches of two with 2 neck nuts. MP 4 fi xing being integral with the cylinder rear cover, only MP 2 mouting needs to be ordered. OPTIONS Mountings performed with front or rear complete trunnions not standardised mountings (see next pages). For a single acting cylinder with rod out at rest ref. SS, (please consult us). Piston rod in 36L stainless steel, catalogue number: in 303 stainless steel, catalogue number: Overlength piston rod in hard chrome steel, cat. n : in 36L stainless steel, cat. n : in 303 stainless steel, cat. n : Front through rod in hard chrome steel, cat. n : in 36L stainless steel, cat. n : in 303 stainless steel, cat. n : rear through rod in hard chrome steel, cat. n : in 36L stainless steel, cat. n : in 303 stainless steel, cat. n : P G-2007/R0
2 ISOCLAIR ROUND CYLINDRS 32 to 63 mm - double acting ISO CTOP with elastic/pneumatic cushioning GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas, fi ltered, lubricated or not Operating pressure 0 bar max. Ambient temperature - 0 C to + 70 C Standards ISO CTOP RP 43 P - RP 02 P - RP 03 P CONSTRUCTION arrel Hard anodized aluminium alloy Rod Hard chrome steel Front and rear covers Light alloy Piston POM (polyacetal), steel, aluminium equipped with permanent magnet Piston seals PUR (polyurethane) Rod nut Galvanized steel Dismounting With elastic cushioning: Cannot be dismounted With adjustable pneumatic cushioning: 32-40: cannot be dismounted 50-63: dismounted Cushioning See "specifi cations" SPCIFICATIONS stroke Cylinder with elastic cushioning Cylinder with adjustable pneumatic cushioning catalogue number reference catalogue number reference CIS 32 NA 25 - DM CIS 32 NA 50 - DM CIS 32 A 50 - DM CIS 32 NA 00 - DM CIS 32 A 00 - DM CIS 32 NA 60 - DM CIS 32 A 60 - DM CIS 32 NA DM CIS 32 A DM CIS 32 NA DM CIS 32 A DM CIS 40 NA 25 - DM CIS 40 NA 50 - DM CIS 40 A 50 - DM CIS 40 NA 00 - DM CIS 40 A 00 - DM CIS 40 NA 60 - DM CIS 40 A 60 - DM CIS 40 NA DM CIS 40 A DM CIS 40 NA DM CIS 40 A DM CIS 40 NA DM CIS 40 A DM CIS 40 NA DM CIS 40 A DM CIS 50 NA 25 - DM CIS 50 NA 50 - DM CIS 50 A 50 - DM CIS 50 NA 00 - DM CIS 50 A 00 - DM CIS 50 NA 60 - DM CIS 50 A 60 - DM CIS 50 NA DM CIS 50 A DM CIS 50 NA DM CIS 50 A DM CIS 50 NA DM CIS 50 A DM CIS 50 NA DM CIS 50 A DM CIS 63 NA 25 - DM CIS 63 NA 50 - DM CIS 63 A 50 - DM CIS 63 NA 00 - DM CIS 63 A 00 - DM CIS 63 NA 60 - DM CIS 63 A 60 - DM CIS 63 NA DM CIS 63 A DM CIS 63 NA DM CIS 63 A DM CIS 63 NA DM CIS 63 A DM CIS 63 NA DM CIS 63 A DM CIS 63 NA DM CIS 63 A DM NS Series 438 Types CIS-NA/DM CIS-A/DM connection The magnetic position detectors must be ordered separately: UNI model, reed switch or magneto-resistive type (see page P295) or COMPACT model, reed switch or magneto-resistive type (see page P293) MOUNTINGS (see page ) OPTIONS Other strokes on request Mountings with front or rear complete trunnions not standardised mountings (see next pages) Stainless steel rod nut: specify catalogue number Custom rod end (please consult us) Piston rod in 36L stainless steel, catalogue number: in 303 stainless steel, catalogue number: Overlength piston rod in hard chrome steel, cat. n : in 36L stainless steel, cat. n : in 303 stainless steel, cat. n : Front through rod in hard chrome steel, cat. n : in 36L stainless steel, cat. n : in 303 stainless steel, cat. n : rear through rod in hard chrome steel, cat. n : in 36L stainless steel, cat. n : in 303 stainless steel, cat. n : P225-2 Cushioning length : 32 mm = 4 mm 40 mm = 8 mm 50 mm = 8 mm 63 mm = 2 mm G /8 G /4 G /4 G 3/ G-2006/R0
3 DIMNSIONS DIMNSIONS, WIGHT (kg) are cylinder (delivered without neck nut) XD + Z + D S M WH F H L + H F MR max SINGL ROD CYLINDR G W h2 MM SW 3 CD H9/e8 F KK F T 3 V P W ZM + 2 P W h2 WH L + WH + PK + THROUGH ROD TYP CYLINDR Stroke 2 2 x stroke 3 Dimensions across fl ats F CD D W G H KK L L M MM MR P PK S M30 x, G/ ,5 M0 x, M36 x, G/ ,5 M2 x, M45 x,5 (6) 2 60 G/ M6 x, , M45 x, G3/ ,5 7 M6 x, SW T V WH XD Z ZM (4) (5) , ,280 0, , ,600 0, , ,950 0, , ,400 0,700 Single and double acting cylinders, 25 mm stroke, have the same dimensions mm for single-acting cylinders with 50 mm strokes. (4) Cylinder with 0 mm stroke. (5) Weight to be added per additional 00 mm length. (6) F front cover: 23,5 - F rear cover: 8,5 Note: The mountings are always delivered separately. P G-2007/R0
4 MOUNTING OPTIONS DIMNSIONS, WIGHT (kg) Rectangular front or rear mounting flange - MF-MF2 Note : Flange delivered with a neck nut. ZF + Z + W UF TF R 4F C Y Foot mounting - MS Note : Feet mounting are supplied in batch of two with 2 neck nuts.. C AT AH AT H TR 2A = L + = SA + XA + AO Stroke AO C A F H L AH AT R SA TF TR UF W XA Y Z ZF , mm for single acting cylinders with 50 mm stroke. Front or rear flange 2 feet Front or rear flange 2 feet 32 0,090 0, ,290 0, ,30 0, ,330 0,640 P G-2006/R0
5 MOUNTING OPTIONS DIMNSIONS, WIGHT (kg) Rear male trunnion mounting - MP4 Note : MP 4 mounting is built into the cylinder rear cover MR max CD H9/e8 W h2 XD + Stroke Complete trunnion mounting - MP2 + MP4 Note : MP 4 fi xing being integral with the cyliner rear cover, only MP 2 mounting needs to be ordered. TG 4F TG TG Y XD + CD H9/e8 A D Stroke A CD D W F MR TG XD Y max mm for single-acting cylinders with 50 mm strokes. Complete trunnion Complete trunnion 32 0, , , ,55 P G-2006/R0
6 MOUNTING OPTIONS DIMNSIONS, WIGHT (kg) Female rod clevis - ISO RP 02 P - AP2 CK H9/d0 max. AV CM K max. L C R max. KK CL Spherical bearing rod end - ISO RP 03 P - AP6 N h2 ; KK CN H9 AX R max. LF CH Neck nut - MR3 KV KW AV-AX C CH CK CL CM CN N R K KK KV KW L LF max M30 x, ,5 +0, M0 x, M36 x, , M2 x, , M45 x, , M6 x, , M45 x, , M6 x, ,5 Rod clevis earing rod end Nut Rod clevis earing rod end Nut 32 0,00 0,070 0, ,330 0,220 0, ,50 0,20 0, ,330 0,220 0,40 P G-2006/R0
7 MOUNTING OPTIONS DIMNSIONS, WIGHT (kg) Rear trunnion mounting The rear trunnion mounting is delivered separately. J + ω L Q K G R Stroke M 4C F + T C F G J K L M Q R T ω Trunnion mounting , , , ,520 Front trunnion mounting The cylinder and front trunnion mounting are supplied assembled Y Z 2 X + S P C C D H N P Q S W X Y Z β (3) (4) ,5 64, ,5 0-0, ,540 0, , , ,5 + 0,5 77,5 9, ,030 0,400-0,5 0-0, ,5 + 90, ,600 0, , ,5 + 6,5 23, ,300 0, (3) Weight of cylinder + rings and trunnion mountings for a 0 mm stroke. (4) Weight to be added per 00 mm of additional stroke. Q 4D β N W H Stroke 2 Ring P G-2006/R0 ASCO/JOUCOMATIC reserves the right to alter the availability, design and specifi cations without notice.
8 P225-8
ISOCLAIR ROUND CYLINDERS Ø 32 to 63 mm - single acting ISO CETOP with elastic cushioning
ISOCLAIR ROUND CYLINDRS 32 to 63 mm - single acting ISO 643 - CTOP with elastic cushioning SR NS Series 438 Type CIS-NA/DM GNRAL Detection quipped for magnetic position detectors Fluid Air or neutral gas,
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) GENERAL Detection Equipped or not for magnetic position
More informationISOCLAIR ROUND CYLINDERS Ø 8 to 25 mm - single acting ISO 6432-CETOP-AFNOR
ISOCLAIR ROUND CYLINDERS to mm - single acting ISO 6432-CETOP-AFNOR FEATURES Good resistance to corrosive elements (barrel and stainless steel rod) SER SES Series 435 Type C-AS C-AS/DM GENERAL Detection
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationSHORT STROKE CYLINDERS Ø 8 to 100 mm - single acting with rod returned at rest NS
SHOT STOKE CYLINDES 8 to 0 mm single acting with rod returned at rest NS Series 1 Type K 00322G11/01 GENEAL Detection Fluid Operating pressure Ambient temperature CONSTUCTION ody Piston rod od end Internal
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationSHORT STROKE CYLINDERS, Ø 20 to 100 mm
SHORT STROKE CYLINDERS, 0 to mm SINGLE AND DOUBLE ACTING CONFORMING WITH AFNOR NF E 49-004 STANDARDS SERIES 44 - TYPE : KN PA16-GB-R Series 44 Type: KN Cylinders conforming with new NF E 49-004-1 standards
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationAIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationSTANDARDISED MOUNTINGS
for PS / PLS / PC cylinders conforming ISO 15552-FNOR-DIN (PS-PLS) ISO 21287 (PC) standards Series 434 MOUNTINGS CONFORMING WITH ISO 21287 - ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationCYLINDERS WITH TIE RODS Ø 25 to 200 mm - double acting CNOMO AFNOR with pneumatic cushioning
CYLIDERS WITH TIE RODS 25 to 200 mm - double acting COO 06-07-02 - AFOR with pneumatic cushioning S Series 437 Type PC GEERAL Detection Equipped for magnetic position detectors Fluid Air or inert gas,
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationStainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationStrokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
More informationSERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
More informationOur policy is one of continued research and development. We therefore reserve the right to amend,
Airmotor (Oscillator) with integrated switches Double acting Ø 50... 100 mm Complete functional unit for oscillating movement Conforms to ISO 6431 and VDMA 24562 Integrated 5/2 valve Frequency and speed
More informationSTANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More informationCYLINDERS. Moving more than air
CYLINDRS 1 Moving more than air Content 1-2 1-2 page 1.1 Round cylinders 1.1.1 RI(M) / RI(M) / RIB(M) / RID(M) Round cylinders according to ISO 6432 piston-ø 8 25 mm 3 1.1.2 Accessories for round cylinders
More informationTECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationDouble and single-acting, double-acting non-rotating, magnetic ø12, 16, 20, 25 mm ø 32, 40, 50, 63, 80, 100 mm UNITOP
CATALOGUE > Release 8.7 > Series 3 cylinders Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP» Compact design»
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationSeries 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
More informationOur policy is one of continued research and development. We therefore reserve the right 1/98 N
ISO Cylinders Magnetic Piston Single Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Nose mounting nut and piston rod locknut as standard Technical Data Medium:
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationExtruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
More information12/95 N Our policy is one of continued research and development. We therefore reserve the right
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Double Acting 32 to 125 mm Cylinders to VDMA Standard 24562, ISO 6431 and NFE 49-003-1 New polyurethane seals ensure
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationStandard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M PA/183000, PA/183000/M Profile barrel with concealed tie rods Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Single Acting 32 to 100 mm
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationMagnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm
CATALOGUE > Release 8.5 > Cylinders Series 27 Magnetic cylinders Series 27 Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm»» Reduced dimensions»» Different mounting options»» Perfect alignment, perfect
More informationISO CYLINDERS SERIES HCR (High Corrosion Resistance) ACTUATORS
ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) 1 ISO 15552 CYLINDERS SERIES HCR (High Corrosion Resistance) In some applications, the cylinders are exposed to aggressive environments (e.g.
More informationTie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More information-H- Note. -N- Diameters. -T- Stroke lengths. -W- Note. Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance Festo AG & Co.
Standard cylinders DNU/DNUL to ISO 6431 Key features at a glance ISO and standard cylinders DNU/DNUL -H- Note For new applications use type DNC ( -54). -N- Diameters 32... 125 mm -T- Stroke lengths 10...
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationPRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552 Non-magnetic and magnetic piston Double acting Ø 32 to 125 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
More informationTie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
More informationRA/8000, RA/8000/M. Pneumatic cylinders ISO 6431, VDMA and NFE Non-magnetic and magnetic piston Double acting Ø 32 to 320 mm
Pneumatic cylinders ISO 6431, VDMA 456 and NFE 49-003-1 Non-magnetic and magnetic piston Double acting Ø 3 to 30 mm Comprehensive range for the utmost versatility Conforms to DIN ISO 6431, VDMA 456 and
More informationPVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
More informationAir-Oil Systems, Inc.
Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have
More informationRM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
More informationAvailable: Cylinders till july 2000 Spares till july /98 N
Available: Cylinders till july 2000 RM/55400/M Roundline Cylinders Magnetic Piston Double Acting 32 to 100 mm bore Magnet piston as standard provides a wide range of control options Attractive clean- line
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationSeries QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
More informationOur policy is one of continued research and development. We therefore reserve the right 10/99 N
Stainless Steel ISO Cylinders Magnetic Piston Double Acting Ø 12 to 25 mm High corrosion and acid resistance Magnetic piston as standard Conforming to ISO 6432 Suitable for applications in the Food Industry
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationSHORT STROKE CYLINDERS Ø 8 to 100 mm - single and double acting with single/double rod, antirotation device
SHOT STOKE CYINES 8 to 100 mm - single and double acting with single/double rod, antirotation device Series 441 GENEA etection luid Operating pressure Ambient temperature CONSTUCTION Body Piston rod od
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationWST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement
WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F
More informationOur policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
More informationP1D-B Pneumatic Cylinders
P1D-B Pneumatic Cylinders According to ISO 15552 P1D-B series. This series features a profile design and is the basic ISO cylinder for simple applications where no special options are required. This series
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationLRM/55401/M, Roundline cylinder Magnetic piston, double acting
LRM/5540/M, Roundline cylinder > > 3... 00 mm > > Clean line design > > Low friction, long life seals > > Standard magnetic piston for full control system versatility > > Non-lube operation > > Shock and
More informationISO/TC 131/SC 3 Secretariat: DIN Voting begins on: Voting terminates on:
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 15552 ISO/TC 131/SC 3 Secretariat: DIN Voting begins on: 218 1 17 Voting terminates on: 218 3 14 Pneumatic fluid power Cylinders with detachable mountings, 1
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationStrokes (mm) N/en
IVC cleanline Cylinder double acting, magnetic piston 32... 100 mm Cylinders and mountings conform to ISO 15552 Complete functional unit with LED display Central electrical connector, polarity-safe Integrated
More informationXG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationTie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationStainless Steel Cylinders Acid and Corrosion Resistant
Stainless Steel Cylinders Acid and Corrosion Resistant Subject to change 133 Stainless Steel Cylinders Contents Stainless Steel Double-Acting Cylinders per ISO 6432 Bores 12 to 25 mm Type CRDSNU... 137
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More informationFlat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
More informationPRA/842000/M, PRA/ Clean Line cylinder Magnetic or non-magnetic piston, double acting
> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance
More informationDIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER
METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING
More informationCartridge cylinders EGZ
Peripherals overview and type codes 7 Installation without mounting attachments Minimal installation space required 4 3 2 1 Mounting attachments and accessories Description 1 Swivel mounting WBN 2 Flange
More informationRM/57200/M, RT/57200/M
Roundline Cylinders Magnetic Piston Double Acting Ø 8 to 63 mm Three different basic versions provide flexibility and wide range of application Magnetic piston as standard provides a wide range of control
More informationMedium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable
N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder
More informationStainless Steel Cylinders DIN ISO 6431 and VDMA Bores from 32 to 200 mm
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYP MAGNTIC STANDARD AMX STAINLSS STL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
More informationSeries C95 ø32, ø40, ø50, ø63, ø80, ø100
ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.
series Table for standard stroke Stroke (mm) ø20,25 5,10,15,20,25,30,40,50,60,80,100,200 ø32,40 5,10,15,20,25,30,40,50,60,80,100,200,300 ø50,63 10,15,20,25,30,40,50,60,80,100,200,300,400 ø80,100 15,20,25,30,40,50,60,80,100,200,300,400,500
More information