ConvertaMAX 28 BA 750 / BA 850

Transcription

1 ConvertaMAX 8 I-MAX 8HD BA 70 / BA 80 PARTS LIST Advance MODELS 63960, Nilfisk MODELS , ConvertaMAX 8 after SN930 / I-MAX 8HD after SN93 BA 70 after SN9387 / BA 80 after SN939 3/0 revised 0/03 SECTION.3.

2 TABLE OF CONTENTS E.3. DESCRIPTION PLAN CONVERTAMAX 8 / BA 70 CHASSIS SYSTEM... E BA 80 CHASSIS SYSTEM... E-.3.- I-MAX 8HD CHASSIS SYSTEM... E CONTROL HANDLE SYSTEM... E HANDLE PADDLE ASSEMBLY... E-.3.- C-MAX 8 / I-MAX 8HD / BA 70 SCRUB SYSTEM... E BA 80 SCRUB SYSTEM... E-.3.- SKIRT ASSEMBLIES (CONVERTAMAX 8 / BA 70)... E SKIRT ASSEMBLIES (BA 80 / I-MAX 8HD)... E SOLUTION SYSTEM... E-.3.- RECOVERY SYSTEM... E SQUEEGEE SYS (C-MAX 8, I-MAX 8HD & BA 70)... E-.3.- SQUEEGEE SYSTEM (BA 80)... E SQUEEGEE ASSY (C-MAX 8 / I-MAX 8HD / BA 70)... E SQUEEGEE ASSY (BA 80)... E DECAL SYSTEM... E ELECTRICAL DIAGRAM... E PARKING BRAKE KIT...E HIGH TOWER ROLLER BUMPER KIT...E BRUSH / DISC SELECTOR GUIDE... E WHEN ORDERING PARTS * Use the 8 digit numbers from the Ref. No. columns in this parts list. * Specify the model and serial number of the machine. * Use the space below to record the model and serial number for future reference. Model Serial No.

3 CONVERTAMAX 8 / BA 70 CHASSIS SYSTEM 0-3 E FRONT

4 CONVERTAMAX 8 / BA 70 CHASSIS SYSTEM E.3. 3 Item Ref. No. Qty Description Scr, Hex Hd Loc /6-8 x Scr, Soc Set Loc /6-8 x Scr, Hex Hd 3/8-6 x Wsh, Flt SAE / Wsh, Flt SAE 3/ Scr, Pan Phil /-0 x Scr, Soc Hd 3/8-6 x Scr, Soc Hd /6-8 x Scr, Soc Hd 3/8-6 x Nut, Hex Nyl Loc / Nut, Hex Nyl Loc Scr, Pan Phil /6-8 x Scr, Pan Phil SS 0- x Scr, Hex Thd To Hd SS /-0 x Scr, Hex Thd To Hd M8-. x 0mm Nut, Hex Nyl Loc M Wsh, Flt.66 x.906 x Scr, Pan Phil Thd Form 0- x Nut, Hex Jam / Clamp, Hose SAE # Caster, Swivel ** 60 Caster, Swivel Neoprene ** 6393 Castor, Spring Load Bearing, Ball Nut, U Multi-Thread / Term. Block, Term. 0 Amp Box, Battery Molded Clip, Conduit Sprocket Chain, Roller Sprocket, H0B Clamp, Axle Bushing Panel, Front Panel, Left Panel, Right Bracket, Vac Exhaust Hose Asm. Motor and Gear Unit, V Chassis Weldment Bracket, Tension-Traction Drive Wheel 0.00 x Axle 6397 Shroud, Motor Plate, Jumper Clip, Conduit Scr, Hex Hd /6-8 x Wsh, Flt..06 x.70 x.090 ** High Tower Roller Bumper Kit ** Parking Brake Kit ** = Optional

5 BA 80 CHASSIS SYSTEM 0-3 E FRONT

6 BA 80 CHASSIS SYSTEM E.3. Item Ref. No. Qty Description Scr, Hex Hd Loc /6-8 x Scr, Soc Set Loc /6-8 x Scr, Hex Hd 3/8-6 x Wsh, Flt SAE / Wsh, Flt SAE 3/ Scr, Pan Phil /-0 x Scr, Soc Hd 3/8-6 x Scr, Soc Hd /6-8 x Scr, Soc Hd 3/8-6 x Nut, Hex Nyl Loc / Nut, Hex Nyl Loc Scr, Pan Phil /6-8 x Scr, Pan Phil SS 0- x Scr, Hex Thd To Hd SS /-0 x Scr, Hex Thd To Hd M8-. x 0mm Nut, Hex Nyl Loc M Wsh, Flt.66 x.906 x Scr, Pan Phil Thd Form 0- x Nut, Hex Jam / Clamp, Hose SAE # Bearing, Ball Nut, U Multi-Thread / Term. Block, Term. 0 Amp 600 Caster, Swivel ** 60 Caster, Swivel Neoprene ** 6393 Castor, Spring Load Box, Battery Molded Clip, Conduit Sprocket Chain, Roller Sprocket, H0B Clamp, Axle Bushing Panel, Front Panel, Left Panel, Right Bracket, Vac Exhaust Hose Asm, Motor and Gear Unit, V Chassis Weldment Bracket, Tension-Traction Drive Wheel 0.00 x Axle 6397 Shroud, Motor Plate, Jumper Clip, Conduit Scr, Hex Hd /6-8 x Wsh, Flt..06 x.70 x.090 ** High Tower Roller Bumper Kit ** Parking Brake Kit ** = Optional

7 I-MAX 8HD CHASSIS SYSTEM 0-3 E FRONT

8 I-MAX 8HD CHASSIS SYSTEM E.3. 7 Item Ref. No. Qty Description Scr, Hex Hd Loc /6-8 x Scr, Soc Set Loc /6-8 x Scr, Hex Hd 3/8-6 x Wsh, Flt SAE / Scr, Pan Phil /-0 x Nut, Hex Nyl Loc / Nut, Hex Nyl Loc Scr, Pan Phil /6-8 x Scr, Pan Phil SS 0- x Scr, Pan Phil /6-8 x Scr, Hex Thd To Hd SS /-0 x Scr, Hex Thd To Hd M8-. x 0mm Nut, Hex Nyl Loc M Wsh, Flt.66 x.906 x Scr, Pan Phil Thd Form 0- x Nut, Hex Jam / Clamp, Hose SAE # Caster, Swivel ** 60 Caster, Swivel Neoprene ** 6393 Castor, Spring Load Bearing, Ball Scr, Soc Hd 3/8-6 x Nut, U Multi-Thread / Term. Block, Term. 0 Amp Box, Battery Molded Clip, Conduit Sprocket Chain, Roller Sprocket, H0B Clamp, Axle Bushing Assembly, Bumper Industrial * Ring, Ret Ext Type E.0 Dia. * Nut, Push Cap / * Roller * Rod * Weldment, Bumper Industrial Bracket, Vac Exhaust Hose Asm. Motor and Gear Unit, V Chassis Weldment Bracket, Tension-Traction Drive Spacer, AL Panel, Right Panel, Left Wheel 0.00 x Axle Shroud, Motor Plate, Jumper Clip, Conduit Scr, Hex Hd /6-8 x Wsh, Flt..06 x.70 x.090 ** Industrial Side Panel Kit ** Parking Brake Kit * = Not Shown ** = Optional

9 E.3. 8 CONTROL HANDLE SYSTEM

10 CONTROL HANDLE SYSTEM E.3. 9 Item Ref. No. Qty Description Scr, Flt Phil /-0 x Scr, Hex Hd /-0 x Wsh, Flt SAE # Scr, Hex Hd /-0 x Scr, Hex Hd /6-8 x Scr, Pan Phil 0- x Scr, Pan Phil /-0 x Scr, Pan Phil Thd Form 6-3 x Nut, Hex W/SHPRF / Nut, Hex Nyl Loc / Nut, Hex Nyl Loc Scr, Pan Phil /-0 x Scr, Pan Phil Blk 0- x Nut, Hex Nyl Loc-Thin / Wsh, Flt SAE SS / Scr, Pan Phil Plastite 6-8 x Wsh, Flt.66 x.906 x Stud Scr, Pan Phil Loc /-0 x Wsh, Flt.3 x.93 x Scr, Pan Phil Plastite 0- x Stud, / Grommet Plug, Cap Plug, Cap Circuit Breaker 0 Amp (Control Circuit) Rectifier Fuse, 0 Amp Contactor, VDC (Vac Motor) Spacer Grommet Circuit Breaker 0 Amp (Wheel Drive) Barb, 90 Elbow /6 x 3/ NPT Boot, Reset Button Boot, Reset Button Electrical Mount Tie, Cable Tie, Cable Scr, Pan Phil Thd Form 8-3 x Knob Control Box Assy Relay, SPST, V (Brush Remove) Grommet 6396 Gasket 6396 Weldment, Electrical Cover TSBUS Item Ref. No. Qty Description Display Panel Assembly Contactor, V, SPDT (Brush Motor) Cable Assembly, Thermistor (Not Shown) Controller, V Bracket, Panel Switch, Key * A/R Replacement Key Paddle, Handle Assy (see associated pages) Back Panel Weldment Potentiometer, 00K Clamp, Plastic Cover, Rear Spring Clip Hose, PVC / x 3/8 x Connector Assembly TSBUS003-8 (Connect to Batteries) Connector Assembly (Connected to Machine) * Harness, Main * = Not Shown

11 E.3. 0 HANDLE PADDLE ASSEMBLY

12 0-3 HANDLE PADDLE ASSEMBLY E.3. Item Ref. No. Qty Description Paddle, Handle Assembly (#-6) Wsh, Flt SAE # Wsh, Flt SAE # Scr, Pan Phil -0 x Nut, Hex Nyl Loc Scr, Pan Phil Plastite 6-8 x Scr, Pan Phil Plastite 8- x Scr, Pan Phil M x Scr, Pan Phil Plastite /-0 x Scr, Pan Phil Thd Form 0- x Wsh, Flt.93 x.87 x Clamp, P 636 Spring, Compression Tie, Cable Clamp, P Scr, Pan Phil Type B 8 x Switch, Snap SPDT (Squeegee Reverse) Harness Assembly Cam Controller Potentiometer, K Paddle, Front Molded Paddle, Back Molded Weldment, Handle Sleeve Washer, Plastic Clamp Potentiometer Fork

13 E.3. C-MAX 8 / I-MAX 8HD / BA 70 SCRUB SYSTEM FRONT

14 C-MAX 8 / I-MAX 8HD / BA 70 SCRUB SYSTEM E.3. 3 Item Ref. No. Qty Description Item Ref. No. Qty Description Scr, Hex Hd 3/8-6 x Wsh, Flt SAE / Scr, Hex Hd 3/8-6 x Nut, Hex Nyl Loc Nut, Hex Nyl Loc-Thin 3/ Wsh, Flt SAE SS / Scr, Pan Phil SS 8-3 x Key, Sq.. x Nut, Hex Nyl Loc M Scr, Hex Loc SS /6-8 x Scr, Hex Loc SS 3/8-6 x Scr, Hex M-.7 x 3mm Scr, Hex Loc SS M8- x mm Wsh, Flt SS.378 x.00 x Wsh, Flt.06 x.0 x Clamp, P Clamp, P Clamp, Hose SAE # Bearing, Sleeve Pin, Cotter Hair.09 x Motor and Gear Unit, V (ConvertaMAX 8 / BA 70) Motor and Gear Unit, V (I-MAX 8HD) Weldment, Brush Head Shaft, Steel Hose, PVC Clear Arm Lift Actuator Assembly (#37-) Yoke, Actuator Lug, Counter-Clockwise (#6-3) Lug Clockwise (#6-3) Hose, PVC Bushing 3 Intentionally Omitted 33 Intentionally Omitted Hub, Drive Shroud, Motor Tee, Barb Scr, Hex Thd Form /-0 x Scr, Pan Phil Thd Form /-0 x Actuator, Motor * Carbon Brush Set * Limit Switch * Plastic Drive Nut Compression Spring 66 Housing, Spring 6008 Compression Spring Nut Retainer 6000 Nut Retainer Spring Housing Guide Nut, Hex Nyl Loc SS M8 x Scr, Hex Hd SS M8-. x mm Scr, Pan Phil Thd Form 0- x Wsh, Flt.93 x.87 x Thermoid Disk Spring Retainer Brush Holder Wsh, Flt SAE SS /6 ** Pad Holder ** 6077 MagnaGrit Brush ** 6077 DynaGrit Brush ** AgLite Grit Brush ** 6077 Prolene Brush ** 6077 ProLite Brush ** Union Mix Brush ** MidGrit Brush ** MidLite Brush ** 6808 Lock Collar, Snap ** Lock Collar, Thrd * = Not Shown ** = Not Included (optional)

15 E.3. BA 80 SCRUB SYSTEM FRONT

16 BA 80 SCRUB SYSTEM E.3. Item Ref. No. Qty Description Item Ref. No. Qty Description Scr, Hex Hd 3/8-6 x Wsh, Flt SAE / Scr, Hex Hd 3/8-6 x Nut, Hex Nyl Loc Nut, Hex Nyl Loc-Thin 3/ Wsh, Flt SAE SS / Scr, Pan Phil SS 8-3 x Key, Sq.. x Scr, Hex M-.7 x 60mm Nut, Hex Nyl Loc M Scr, Hex Loc SS /6-8 x Scr, Hex Loc SS 3/8-6 x Scr, Hex M-.7 x 3mm Scr, Hex Loc SS M8- x mm Wsh, Flt SS.378 x.00 x Wsh, Flt.06 x.0 x Clamp, P Clamp, P Clamp, Hose SAE # Bearing, Sleeve Pin, Cotter Hair.09 x Motor and Gear Unit, V Weldment, Brush Head 6067 Shaft, Steel Hose, PVC Clear Arm Lift Actuator Assembly (#38-6) Yoke, Actuator Lug, Counter-Clockwise (#7-) Lug Clockwise (#7-) Bushing Bushing Hub, Drive Shroud, Motor Tee, Barb Hose, PVC 37 Intentionally Omitted Spring Housing Guide Scr, Hex Thd Form /-0 x Scr, Pan Phil Thd Form /-0 x Actuator, Motor * Carbon Brush Set * Limit Switch * Plastic Drive Nut 607 Compression Spring 3 66 Housing, Spring 6008 Compression Spring 6009 Nut Retainer Nut Retainer Wsh, Flt SAE SS / Nut, Hex Nyl Loc SS M8 x Scr, Hex Hd SS M8-. x mm Scr, Pan Phil Thd Form 0- x Wsh, Flt.93 x.87 x Thermoid Disk Spring Retainer Brush Holder ** Pad Holder ** 6078 MagnaGrit Brush ** 6078 DynaGrit Brush ** AgLite Grit Brush ** 6078 Prolene Brush ** 6078 ProLite Brush ** Union Mix Brush ** MidGrit Brush ** MidLite Brush ** 6808 Lock Collar, Snap ** Lock Collar, Thrd * = Not Shown ** = Not Included (optional)

17 SKIRT ASSEMBLIES (ConvertaMAX 8 / BA 70) E FRONT

18 0-3 SKIRT ASSEMBLIES (ConvertaMAX 8 / BA 70) E.3. 7 Item Ref. No. Qty Description Assembly, Brush Cover, Left (#-8) Scr, Flt Phil 6-3 x Nut, Hex Nyl Loc SS Nut, Hex Nyl Loc SS M Scr, Hex Hd SS M6-.00 x 6mm Latch, Assembly Skirt, Bristle, Left Weldment, Brush Cover, Left Assembly, Brush Cover, Right (#0-6) Wsh, Flt SAE / Scr, Soc Shd.38 x.0 x Nut, Hex Nyl Loc / Nut, Hex Nyl Loc SS M6 x Scr, Hex Hd SS M6-.00 x 6mm 680 Wheel Skirt, Bristle, Right Weldment, Brush Cover, Right ** Rubber Blade Kit ** = Optional

19 E.3. 8 SKIRT ASSEMBLIES (BA 80 / I-MAX 8HD) FRONT

20 0-3 SKIRT ASSEMBLIES (BA 80 / I-MAX 8HD) E.3. 9 Item Ref. No. Qty Description Assembly, Brush Cover, Left (#-8 / BA 80) Scr, Flt Phil 6-3 x Nut, Hex Nyl Loc SS Nut, Hex Nyl Loc SS M Scr, Hex Hd SS M6-.00 x 6mm Latch, Assembly Skirt, Bristle, Left Weldment, Brush Cover, Left Assembly, Brush Cover, Right (#0-6 / BA 80) Scr, Soc Shd.38 x.0 x / Nut, Hex Nyl Loc / Nut, Hex Nyl Loc SS M6 x Scr, Hex Hd SS M6-.00 x 6mm 680 Wheel Skirt, Bristle, Right Weldment, Brush Cover, Right 7 Intentionally Omitted 8 Intentionally Omitted Assembly, Brush Cover, Left (#0-3 / I-MAX 8HD) Scr, Pan Phil 0- x Scr, Soc Hd 3/8-6 x Nut, Hex Nyl Loc Nut, Hex Nyl Loc SS M Scr, Hex Hd SS M6-.00 x 6mm Scr, Pan Phil Thd Form-Blk 0- x Clamp, Toggle Latch Wheel, Black Spacer, Steel Skirt, Bristle, Left Weldment, Brush Cover, Left Strap Bumper Assembly, Brush Cover, Right (#3-3 / I-MAX 8HD) Scr, Soc Hd 3/8-6 x Nut, Hex Nyl Loc SS M Scr, Hex Hd SS M6-.00 x 6mm Scr, Pan Phil Thd Form-Blk 0- x Wheel, Black Spacer, Steel Skirt, Bristle, Right Weldment, Brush Cover, Right Strap Bumper ** Rubber Blade Kit (I-MAX 8HD) ** Rubber Blade Kit (BA 80) ** = Optional

21 E.3. 0 SOLUTION SYSTEM FRONT

22 SOLUTION SYSTEM E.3. Item Ref. No. Qty Description Wsh, Flt SAE SS / Scr, Pan Phil SS /-0 x Scr, Pan Phil SS Type B 0-6 x Wsh, Flt SS # Clamp, Hose SAE # Clamp, Hose SAE # Hose, Spiral Barb, 90 Elbow /6 x 3/NPT Tie, Cable Hook (Not Shown) 6069 Hinge 6078 Plug, Expansion Tank, Solution Hose,.7 Clear PVC Hose,.7 Clear PVC Assembly, Filter (# -9) TSBUS Assembly, Filter (#-9) TSBUS Assembly, Ball Valve (#30-0) Lid, Solution Strap, Retaining Scr, Hex Thd To Hd M6-.00 x 6mm Nut, Hex Nyl Loc M Clamp, Hose SAE # Clamp, Hose SAE # Strainer TSBUS Solution Filter TSBUS Filter Bracket Barb, Hose Female TSBUS Barb, Adapter / x /NPT TSBUS Solenoid Valve Assembly Hose, PVC Clear TSBUS Hose, PVC Clear TSBUS Scr, Pan Phil SS /-0 x Scr, Hex Thd To Hd M6-.00 x 6mm Nut, Hex Nyl Loc M Barb, 90 Elbow 3/ x /NPT Clamp, Hose SAE # 3 68 Barb, Adapter / x / NPT Street Elbow Valve, Ball Knob Flow Valve Weldment Bracket, Water Valve

23 E.3. RECOVERY SYSTEM FRONT

24 0-3 RECOVERY SYSTEM E.3. 3 Item Ref. No. Qty Description Nut, Hex Nyl Loc Wsh, Flt SAE SS / Scr, Pan Phil SS 0- x Scr, Pan Phil SS /-0 x Scr, Pan Phil SS /-0 x Scr, Pan Phil SS /-0 x Rivet, Pop A/S. x.38 / Wsh, Flt SS. x.0 x Wsh, Flt SS # Vac Motor Duct 6306 Gasket 6397 Cage, Float Ball, Float Foam, Acoustical 603 Clamp, Hose SAE # Clamp, Hose SAE # Tie, Cable Clamp, P Scr, Soc Shd. x.38 x Bar, Steel 630 Float Duct Drain Hose Bracket, Pivot 6396 Tank, Recovery (ConvertaMAX 8 / I-MAX 8HD) Tank, Recovery (BA 70 / BA 80) Vac Hose Assembly Hose, Vac Exhaust Vac Motor Assembly Carbon Brush Set Lid Clamp, Hose Spacer Bolt Gasket Strap, Retaining Spacer, Vac Motor Gasket, Vac

25 SQUEEGEE SYSTEM (ConvertaMAX 8, I-MAX 8HD & BA 70) E FRONT

26 0-3 SQUEEGEE SYSTEM (ConvertaMAX 8, I-MAX 8HD & BA 70) E.3. Item Ref. No. Qty Description Nut, Hex Nyl Loc / Nut, Hex Nyl Loc-Thin SS 3/ Nut, Hex Nyl Loc-Thin SS / Knob Scr, Hex Hd SS 3/8-6 x Actuator Assembly (items 0-8) Pin, Cotter Hair Bearing, Sleeve Squeegee Assembly (ConvertaMAX 8 / BA 70 / see associated pages) Squeegee Assembly (I-MAX 8HD / see associated pages) Eye Bolt / Spring, Ext Spring, Comp Shaft, Steel Weldment, Squeegee Mount Weldment, Squeegee Lift Squeegee Bar Weldment Squeegee Pivot Weldment Nut, Hex Nyl Loc-Thin 3/ Wsh, Flt SAE 3/ Actuator, Motor * Carbon Brush Set * Limit Switch 6088 Pin Ring, Ret Ext Type E.38 Dia Yoke, Actuator Pin Spacer Link Scr, Hex Hd SS M8-. x 60MM Nut, Hex Nyl Loc SS M8 x. * = Not Shown

27 SQUEEGEE SYSTEM (BA 80) E FRONT 3 6 6

28 SQUEEGEE SYSTEM (BA 80) E.3. 7 Item Ref. No. Qty Description Wsh, Flt SAE 3/ Nut, Hex Nyl Loc / Nut, Hex Nyl Loc-Thin 3/ Nut, Hex Nyl Loc-Thin SS 3/ Nut, Hex Nyl Loc-Thin SS / Scr, Hex Hd SS 3/8-6 x Ring, Ret Ext Type E 0.38 Dia Nut, Hex Nyl Loc SS M8 x Scr, Hex Hd SS M8-. x 60MM Bolt, Eye /-0 x Pin 6003 Pin, Cotter Hair. x diam..0/ Bearing, Sleeve 639 Yoke, Actuator 6088 Pin Assembly, Knob, Adjustment Spring, Ext Compression Spring Shaft Stl Weldment Squeegee Lift Squeegee Bar Weld t Squeegee Pivot Weld t Link Spacer Squeegee Assembly (see associated pages) Mounting Plate Weldment Actuator, Motor

29 SQUEEGEE ASSY (C-MAX 8 / I-MAX 8HD / BA 70) E FRONT

30 0-3 SQUEEGEE ASSY (C-MAX 8 / I-MAX 8HD / BA 70) E.3. 9 Item Ref. No. Qty Description Scr, Hex Hd SS /-0 x Nut, Hex Nyl Loc-Thin SS / Wsh, Flt SAE SS / Scr, Hex Hd SS /-0 x Scr, Pan Phil SS 6-3 x Nut, Hex Nyl Loc-Thin SS Nut, Wing Loc / Wheel Wheel Nut, Thumb Strap, Rear Right Strap, Rear Left Strap, Front 6399 Tool Weldment Bracket, Wheel Latch Bushing,. x.37 x Blade, Rear (ConvertaMAX 8 / BA 70) Blade, Rear (I-MAX 8HD) Blade, Front (ConvertaMAX 8 / BA 70) Blade, Front (I-MAX 8HD) ** Standard Blade Kit (Gum Rubber) ** 6393 Oil Resistant Blade Kit (Neoprene) ** Linatex Blade Kit ** Blade, Front-Tile Gum ** Blade, Front-Tile Linatex ** = Optional

31 SQUEEGEE ASSEMBLY (BA 80) E FRONT

32 0-3 SQUEEGEE ASSEMBLY (BA 80) E.3. 3 Item Ref. No. Qty Description Squeegee Assembly Scr, Hex Hd SS /-0 x Nut, Hex Nyl Loc-Thin SS / Wsh, Flt SAE SS / Scr, Hex Hd SS /-0 x Scr, Pan Phil SS 6-3 x Nut, Hex Nyl Loc-Thin SS Nut, Wing Loc / Wheel Wheel Nut, Thumb 679 Latch Assembly 670 Bushing. x.37 x Strap, Rear Strap, Front Strap, Rear Squeegee Tool Weldment Blade, Front Blade, Rear Bracket, Wheel ** Blade Kit Gum (contains one & ) ** Blade Kit Linatex (contains one & ) ** Blade, Front-Tile Gum ** Blade, Front-Tile Linatex ** Blade Kit Oil Resistant ** = Optional

33 E.3. 3 DECAL SYSTEM FRONT

34 0-3 DECAL SYSTEM E Item Ref. No. Qty Description 6060 Decal, Caution Decal, Battery Wiring Decal, Electrical Schematic Decal, ConvertaMAX 8 (ConvertaMAX 8) Decal, I-MAX 8HD (I-MAX 8HD) Decal, BA70 (BA70) 6069 Decal, BA80 (BA80) Decal, Circuit Breaker

35 E.3. 3 ELECTRICAL DIAGRAM 0-3 (+) RED F 6 30 BT 3 BLK (-) RED F GRN YEL/BRN RED/BRN S ORN/GRN RED/BRN ORN/GRN L ORN/WHT YEL/WHT M M YEL/BLU ORN/GRN YEL/GRN M M GRN/BRN YEL/BLU 3 YEL/WHT A3 7 6 RED/BRN RED/BRN WHT/BLU GRN/BLK VIO/BLK ORN/BLU BLK/WHT RED/BLK ORN/VIO ORN/RED ORN/BLK WHT/ORN ORN/GRN 3 6 A ORN/WHT YEL/BRN J BLK J BLK 7 J VIO RED/WHT J 7 BLK RED/WHT VIO WHT ORN GRA/RED VIO/BLK BRN/YEL BRN ORN GRA/RED VIO/BLK RED GRA K BLU M3 M ORN K GRA/RED WHT/BRN D WHT/BRN K VIO/BLK K3 D WHT/BRN BRN/YEL A 3 WHT/BRN S3 BRN BLK RED 0 K WHT K3 WHT M M M M WHT R THERMISTOR BLK BLK RED F3 WHT/YEL ORN/GRN VIO YEL/RED M6 M BRN/BLK A CURTIS PMC M M B- B GRA RED/WHT RED/WHT BRN/RED RED/GRN BLK/YEL VIO/BRN VIO/BRN BLK/YEL GRN/YEL R BLK R3 BRN/RED RED/GRN

36 ELECTRICAL DIAGRAM E.3. 3 Item Ref. No. Qty Description A Controller, V A Control Assy A Display Panel Assembly BT N/A Battery (V system) D Diode D Diode F 6089 Fuse, 0 Amp F Circuit Breaker 0 Amp (Control Circuit) F3 693 Circuit Breaker 0 Amp (Wheel Drive) K 679 Contactor, VDC (Vac Motor) K Contactor, V, SPDT (Brush Motor) K Relay, SPST, V (Brush Remove) L Solenoid Valve M Actuator, Motor (Brush Lift) * Carbon Brush Set * Limit Switch * Plastic Drive Nut * Spring Housing Guide M 607 Actuator, Motor (Squeegee Lift) * Carbon Brush Set * Limit Switch M Vac Motor Assembly * Carbon Brush Set M 6073 Motor and Gear Unit, V (3/ HP) (ConvertaMAX 8 / BA 70 / BA 80) Motor and Gear Unit, V ( HP) (I-MAX 8HD) M 6073 Motor and Gear Unit, V (3/ HP) (ConvertaMAX 8 / BA 70 / BA 80) Motor and Gear Unit, V ( HP) (I-MAX 8HD) M Motor and Gear Unit, V (Wheel Drive) R Thermistor (part of Cable Assy 63968) R Potentiometer, 00K (Speed Control) R Potentiometer, K (Forward / Reverse) S Switch, Key S Switch, Snap SPDT (Squeegee Reverse) Cable Assembly AWG Cable Assembly AWG * Harness, Handle Wiring * Harness, Main Wiring * Boot, Battery Post * 66 3 Cable Assembly (Battery Cables) * Terminal Clamp Battery * Connector Assembly (Connected to Machine) Cable, BLK Cable, RED * 6006 Connector Housing * # Contact * 600 Terminal Ring * Connector Assembly TSBUS003-8 (Connect to Batteries) Cable, RED Cable, BLK * 6006 Connector Housing * # Contact * Terminal Ring * = Not Shown

37 E PARKING BRAKE KIT FRONT 8

38 0-3 PARKING BRAKE KIT E Item Ref. No. Qty Description Kit, Parking Brake 639 Grommet Scr, Hex Hd 0- x Scr, Hex M6-.00 x mm Nut, Hex Nyl Loc M Nut, Hex Nyl Loc Cable, Brake Assembly Brake, Mechanical Caliper Scr, Soc Set Loc /6-8 x Sprocket Weldment Plate, Brake Align Plate, Brake Mount * Instruction Sheet * = Not Shown

39 E HIGH TOWER ROLLER BUMPER KIT FRONT

40 HIGH TOWER ROLLER BUMPER KIT E Item Ref. No. Qty Description Kit, Industrial Bumper Scr, Soc Hd 3/8-6 x Assembly, Industrial Bumper (#3-7) Ring, Ret Ext Type E.0 dia Nut, Push Cap / Roller Rod Weldment, Bumper Industrial * Instruction Sheet * = Not Shown

41 E.3. 0 BRUSH / DISC SELECTOR GUIDE We manufacture brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications when used on the BA70 / BA80. Union Mix: ProLite: Prolene: Magna Grit: Dyna Grit: MidLite Grit: MidGrit: AgLite Grit: Short Trim Pad Holder: Medium grade natural fibers for polishing finished floors with standard-speed equipment. Recommended for use in place of white pads. Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from the floor. Recommended for use in place of red pads. Polypropylene material for medium-duty scrubbing on concrete, terrazzo and vinyl floor tile. Recommended for use in place of green or blue pads. For extreme heavy-duty scrubbing or stripping of floors. This brush has extra large diameter silicon carbide grit impregnated synthetic bristles. Recommended for use in place of black pads. For aggresive, heavy-duty scrubbing or stripping of floors. Recommended for use in place of brown pads. For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For general purpose scrubbing when you need a lighter action for sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient hard surface floors. Recommended for use in place of red or white pads. Made with a structural foam block and center ring for correct pad centering. It has a "shower feed" design for getting solution to the floor. Ref. No.: Ref. No.: BA70 BRUSHES Pad Holder Magna Grit Dyna Grit AgLite Grit Prolene ProLite Union Mix Mid Grit MidLite Grit BA80 BRUSHES Pad Holder Magna Grit Dyna Grit AgLite Grit Prolene ProLite Union Mix Mid Grit MidLite Grit

42 DANMARK Nilfisk-Advance Nordic A/S Sognevej - Box 3 DK-60 Broendby Fax 3 9 NORGE Nilfisk-Advance AS Enebakkvn, 9, 0680 Oslo, Postboks 96, Manglerud, 06 Oslo Fax Distriktsrepresentanter over hele landet SVERIGE Nilfisk-Advance AB Sjöbjörnsvägen, 7 67 Stockholm Fax FINLAND/ SUOMI BERNER Ltd. Facotek Department Etäleranta B, 0030 Helsinki AUSTRALIA Nilfisk-Advance Pty. Ltd. 8 Egerton Street Silverwater NSW 8 (0) Fax (0) Customer Responce Centre: BELGIQUE / BELGIË/ LUXEMBOURG Nilfisk-Advance s.a./n.v. Doornveld/ Sphere Business Park Industrie Asse 3, nr bus 73 Zellik-Asse (0) Fax (0) CANADA Nilfisk-Advance Ltd. 396 Watline Avenue Mississauga, Ontario LZ X (90) Fax (90) 7-3 DEUTSCHLAND Nilfisk-Advance AG Siemensstraße -7 6 Rellingen (0 0) 3990 Fax ( 00) 3999 Zentraler Kundenservice für die Industrie: Institutionen und Gebäudereiniger: FRANCE Nilfisk-Advance S.A. BP 6 99 Courtaboeuf Cedex (0) Télécopie (0) HONG KONG Nilfisk-Advance Ltd. 00, 0/F HK Worsted Mills Industrial Building 3-39 Wo Tong Tsui Street Kwai Chung, N.T. 7 9 Fax IRELAND Nilfisk-Advance Ltd. 8 Sandyford Office Park Dublin Fax JAPAN Nilfisk-Advance Inc Chigasaki Minami Tsuzuki-Ku Yokohama Fax MALAYSIA Nilfisk-Advance Sdn Bhd Lot, st. Floor Lorong 9/A 6300 Petaling Jaya Selangor Darul Ehsan / / Fax NEDERLAND Nilfisk-Advance B.V. Flevolaan 7, Postbus AH Weesp 09-6 Fax NEW ZEALAND Nilfisk-Advance Limited 77 Great South Road, Penrose Auckland (09) 009 Fax (09) 60 SCHWEIZ / SUISSE Nilfisk-Advance AG Ringstrasse 9, 933 Kirchberg/Wil Fax SINGAPORE Nilisk-Advance Pte. Ltd., Woodlands Industrial Park E Singapore 7770 (6) Fax (6) TAIWAN Nilfisk-Advance Ltd. F, No.3, Lane 3, Sec. Ta An Road, Taipei Fax UNITED KINGDOM Nilfisk-Advance Limited Newmarket Road Bury St. Edmunds Suffolk IP 33 3SR (08) Fax (08) 706 USA Nilfisk-Advance Inc. 600 st Avenue North Plymouth, MN Fax Nilfisk-Advance of America, Inc. 300 Technology Drive Malvern, PA 93 (60) ÖSTERREICH Nilfisk-Advance GmbH Vorarlberg Allee 6 30 Wien Fax ESPAÑA Nilfisk-Advance, S.A. Torre D Ara Passeig del Rengle, PI.9-0 E-0830 Mataró (Barcelona) Tel Fax: Central atención al cliente: nilfisk@nilfisk-advance.es Distribuidores y Servicio Técnico en toda España y Andorra ITALIA Nilfisk-Advance Italia Spa Località Novella Terza 686 Guardamiglio (LO) Italy Fax PORTUGAL Nilfisk-Advance Lda. Rua Cândido de Figueiredo, 9-i, LISBOA 0/778 Fax 0/77863 Porto 0/6766 Fax 0/0739 Açores 096/6809/3 Fax 096/689 Madeira 09/896 Fax 09/8796 GREECE Embiom S.A. ˆÊ. µôùïè ÁÌ ÓË 60 ÚÁùÚÔ appleôïë 6 õ Ó Fax Printed in USA

43 Material composition of the Nilfisk BA70/80 Plastic Triple Corrosion Protected Steel Plastic Polyethylene Polyethylene Triple Corrosion Protected Steel Plastic Triple Corrosion Protected Steel Rubber Nylon Triple Corrosion Protected Steel /00