CDMA RF SAW Filters SF14 Series
|
|
|
- Jesse Gerard Hoover
- 6 years ago
- Views:
Transcription
1 CDMA RF SAW Filters Features Small size Low insertion loss High selectivity Hermetic seal Applications CDMA How to Order SF M 5 UB B Type of Product (SAW Filter) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application SF14881M5UBB1 Balanced CELL Rx SF14881M5UUA1 Unbalance CELL Rx SF14836M5UUA2 Unbalance CELL Tx SF14196M5UBC1 Balanced PCS Rx SF14196M5UUA1 Unbalance PCS Rx SF14833M5UUA1 SF14878M5UBA1 Unbalance Balanced BC1+ Cell (BC) Tx BC1+ Cell (BC) Rx Frequency 869MHz 894MHz 869MHz 894MHz 824MHz 849MHz 193MHz 199MHz 193MHz 199MHz 817MHz 849MHz 862MHz 894MHz Insertion Loss (db) Variation (db) VSWR 2.2 max. 1.5 max. 2.5 max. 2.5 max. 1.5 max. 2.5 max. 2.5 max. 1.5 max. 2.1 max. 3.3 max. 2.5 max. 2.5 max. 3. max. 2. max. 2.5 max. 2. max. 1.5 max. 2.5 max. 2.5 max. 1.5 max. 2. max. 1MHz 824MHz 824MHz 849MHz Absolute Rejection (db) 915MHz 96MHz 96MHz 3MHz 4 min. 45 min. 23 min. 4 min. 1MHz 824MHz 915MHz 96MHz 824MHz 849MHz 96MHz 3MHz 2 min. 46 min. 2 min. 2 min. 1MHz 869MHz 894MHz 15MHz 121MHz 158MHz 8MHz 894MHz 15MHz 121MHz 158MHz 2MHz 3 min. 4 min. 35 min. 32 min. 3 min. 27 min. 1MHz 185MHz 185MHz 191MHz 24MHz 22MHz 22MHz 34MHz 34MHz 6MHz 4 min. 24 min. 3 min. 4 min. 4 min. 1MHz 185MHz 24MHz 22MHz 34MHz 185MHz 191MHz 22MHz 34MHz 6MHz 2 min. 2 min. 2 min. 2 min. 2 min. 862MHz 894MHz 157MHz 158MHz 13 min. 3 min. 1MHz 817MHz 1724MHz 185MHz 192MHz 817MHz 849MHz 1788MHz 191MHz 6MHz 4 min. 46 min. 4 min. 46 min. 4 min. Operating Storage Temperature Temperature 3 to +85 C 4 to +85 C Dimensions Recommended Land Pattern 5.25 (Bottom View) 1.4± / ±.5 K * * *. 1.1± ± ±.5 (.1) (.75).5±.5.5± ±.5 Test Circuit <Balance Output Type> Unit : mm <Unbalance Output Type> Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) Balance Output INPUT OUTPUT OUTPUT Unbalance Output INPUT OUTPUT Port 1 Rs Condition: Port 2 Balanced Lp* RL Port 1 Port 3 Rs Rs=5ohm Condition: Rs=5ohm RL=1ohm RL=5ohm Port 2 RL *SF14878M5UBA1 Lp : 47nH
2 CDMA RF SAW Filters Characteristics <CELL Rx> Part No.: SF14881M5UBB1 <CELL Rx> Part No.: SF14881M5UUA <CELL Tx> Part No.: SF14836M5UUA2 <PCS Rx> Part No.: SF14196M5UBC <PCS Rx> Part No.: SF14196M5UUA1 <BC1+Cell (BC) Tx> Part No.: SF14833M5UUA <BC1+Cell (BC) Rx> Part No.: SF14878M5UBA Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
3 UMTS RF SAW Filters Features Small size Low insertion loss High selectivity Hermetic seal Applications UMTS How to Order SF M 5 UB A Type of Product (SAW Filter) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application SF14214M5UBA1 Balanced Band1 Rx SF14195M5UUA1 Unbalance Band1 Tx Frequency 211MHz 217MHz 192MHz 198MHz Insertion Loss (db) Variation (db) VSWR 2.5 max. 2. max. 2.5 max. 3. max. 2. max. 2.3 max. 1MHz 192MHz 192MHz 198MHz Absolute Rejection (db) 198MHz 225MHz 225MHz 25MHz 223MHz 2255MHz 2255MHz 6MHz 3 min. 35 min. 25 min. 2 min. 2 min. 2 min. 1MHz 157MHz 157MHz 188MHz 211MHz 217MHz 23MHz 25MHz 25MHz 3MHz 383MHz 397MHz 28 min. 3 min. 35 min. 32 min. 32 min. 28 min. Operating Storage Temperature Temperature 3 to +85 C 4 to +85 C Dimensions Recommended Land Pattern 5.25 (Bottom View) 1.4± / ±.5 K * * *. 1.1± ± ±.5 (.1) (.75).5±.5.5± ±.5 Test Circuit <Balance Output Type> Unit : mm <Unbalance Output Type> Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) Balance Output INPUT OUTPUT OUTPUT Unbalance Output INPUT OUTPUT Port 1 Rs Condition: Lp Rs=5ohm RL=1ohm Lp=18nH Port 2 Balanced RL Port 3 Port 1 Rs Condition: Rs=5ohm RL=5ohm Port 2 RL
4 UMTS RF SAW Filters Characteristics <Band1 Rx> Part No.: SF14214M5UBA1 <Band1 Rx> Part No.: SF14214M5UBA <Band1 Tx> Part No.: SF14195M5UUA1 <Band1 Tx> Part No.: SF14195M5UUA Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
5 SAW Filters RF SAW Filters for UMTS/LTE SF15 Series (Diplex Type Dual Filter) Features Small size Low insertion loss High selectivity Applications UMTS(WCDMA) LTE How to Order SF E A SU A Type of Product (SAW Filters) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application SF15876EASUA1 Unbalance (Filter1) BAND26 (Filter2) BAND8 Frequency 859MHz 894MHz 925MHz 96MHz Insertion Loss (db) Variation (db) VSWR 3. max. 2. max. 2.2 max. 3. max. 2. max. 2.2 max. Absolute Rejection (db) Operating Storage Temperature Temperature DC 814MHz 914MHz 96MHz 2MHz 814MHz 849MHz 96MHz 2MHz 6MHz 42 min. 4 min. 2 min. 35 min. 25 min. 3~+85 C 4~+85 C DCMHz 88.16MHz 98MHz 125MHz 288MHz 88MHz MHz 125MHz 288MHz 6MHz 38 min. 4 min. 2 min. 3 min. 25 min. Dimensions Recommended Land Pattern 1.5±.1 #9 #8 #7 #6 K ** xxxx 1.1±.1.55 max (.75) (.75) (Bottom View) (C.9) #6 #7.39 #8 # Test Circuit #9 #8 #7 # Unit : mm Unit: mm K: Kyocera logo **: Identification no. : Index mark of pin 1 xxxx:production code PIN No..39 Function Ant.49 PIN No. #6 #7 #8 #9 Function Tx/Rx (Filter2) Tx/Rx (Filter1) 5 ohm Input L 1 #9 #8 #7 #6 L2 Output (Filter1) Output (Filter2) 5 ohm 5 ohm L1[nH] 7.5 L2[nH] 33.
6 SAW Filters RF SAW Filters for UMTS/ LTE SF15 Series (Diplex Type Dual Filter) Characteristics Part No.: SF15876EASUA1 <BAND26> <BAND8> Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
7 SAW Filters RF SAW Filters for TDLTE Features Small size Wide bandwiths Applications TDLTE How to Order SF M 5 UU A Type of Product (SAW Filter) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application SF14235M5UUA1 Unbalance SF14265M5UUA1 Unbalance BAND4 BAND41 Frequency 23MHz 24MHz 2555MHz 2655MHz Insertion Loss (db) Variation (db) VSWR 3.2 max. 2. max. 3.1 max. 2. max. 88MHz 915MHz 925MHz 96MHz Absolute Rejection (db) 171MHz 1785MHz 185MHz 188MHz 2422MHz 2442MHz Operating Storage Temperature Temperature 2442MHz 2482MHz 3 to +85 C 4 to +85 C 32 min. 27 min. 3 min. 25 min. 4 min. 35 min. 88MHz 925MHz 171MHz 185MHz 241MHz 2442MHz 915MHz 96MHz 1785MHz 188MHz 244MHz 2482MHz 2 to +85 C 4 to +85 C 32 min. 27 min. 3 min. 25 min. 4 min. 4 min. Dimensions Recommended Land Pattern ±.1 K ** * ±.1.7max..2875± ±.5 (.1) (Bottom View) 5.25±.5 (.75).5±.5.5± ±.5 Test Circuit Unit : mm Unit: mm K : Kyocera logo ***: Identification no. : Index mark of pin 1 (SF14235M5UUA1) * : Monthly Code : Index mark of ten days ( 1st1th, :11th2th, 21st31st) Tx/ Rx Ant 5 ohm L1 L2 5 ohm 品名 SF14265M5UUA1 SF14235M5UUA1 L1[nH] L2[nH]
8 SAW Filters RF SAW Filters for TDLTE Characteristics Part No.: SF14265M5UUA1 Part No.: SF14265M5UUA Part No.: SF14235M5UUA Part No.: SF14235M5UUA Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
9 SAW Filters RF SAW Filters for TDLTE SF15 Series/ SF18 Series (Diplex Type Dual Filter) Features Small size Low insertion loss High selectivity Applications TDLTE How to Order SF A A SU A Type of Product (SAW Filters) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification Specifications Part No. Output Application SF15265AASUA1 Unbalance SF1819BASUA1 Unbalance Dimensions SF15 series (Filter1) BAND41 (Filter2) BAND39 (Filter1) BAND39 (Filter2) BAND41 RoHS Compliant Frequency Insertion Loss (db) Variation (db) VSWR 2555MHz 3.1 max. 2. max. 2655MHz 188MHz 2.5 max. 2. max. 192MHz 188MHz 2.2 max. 2. max. 192MHz 2555MHz 3.1 max. 2. max. 2655MHz (Bottom View) 88MHz 915MHz 188MHz 192MHz Absolute Rejection (db) 21MHz 225MHz 211MHz 217MHz 23MHz 24MHz 24MHz 2482MHz 752MHz 768MHz 4 min. 3 min. 3 min. 3 min. 35 min. 35 min. 2 min. 88MHz 88MHz 21MHz 23MHz 24MHz 255MHz 752MHz 915MHz 915MHz 225MHz 24MHz 2482MHz 2655MHz 768MHz 4 min. 2 min. 3 min. 3 min. 3 min. 3 min. 3 min. 88MHz 915MHz 185MHz 185MHz 21MHz 225MHz 23MHz 24MHz 24MHz 2482MHz 255MHz 2655MHz 752MHz 768MHz 4 min. 2 min. 3 min. 3 min. 3 min. 3 min. 25 min. 88MHz 188MHz 21MHz 211MHz 23MHz 24MHz 752MHz 915MHz 192MHz 225MHz 217MHz 24MHz 2482MHz 768MHz 4 min. 3 min. 3 min. 3 min. 35 min. 35 min. 5 min. SF18 series (Bottom View) Operating Temperature Storage Temperature 2 to +85 C 4 to +85 C 2 to +85 C 4 to +85 C 1.5±.1 #9 #8 #7 #6 K ** xxxx 1.1±.1.7 max (.75) Unit:mm K:Kyocera logo **:Identification no. :Index mark of pin 1 xxxx:production code (.75) PIN No #6 # (C.9) #8 # Function Ant.49 PIN No. #6 #7 #8 # Function Tx/Rx (Filter2) Tx/Rx (Filter1) 1.8±.1 #9 #8 #7 #6 K ** xxxx 1.4±.1.7 max (.95) Unit:mm K:Kyocera logo **:Identification no. :Index mark of pin 1 xxxx:production code (.775) PIN No #6 # Function Ant (C.125) #8 #9 2.6 PIN No. #6 #7 #8 # Function Tx/Rx (Filter2) Tx/Rx (Filter1) Recommended Land Pattern SF15 series #9 #8 #7 # SF18 series #9 #8 #7 # Test Circuit Unit : mm Unit : mm 5 ohm Input L1 #9 #8 L2 Output (Filter1) 5 ohm #7 #6 L3 Outpu (Filter2) 5 ohm 品名 SF15265AASUA1 SF1819BASUA1 L1[nH] L2[nH] L3[nH]
10 SAW Filters RF SAW Filters for TDLTE SF15 Series/ SF18 Series (Diplex Type Dual Filter) Characteristics Part No.: SF15265AASUA1 <BAND41> <BAND39> Part No.: SF1819BASUA1 <BAND39> <BAND41> Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18± C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
11 SAW Filters RF SAW Filters for TDSCDMA SF15 Series (Diplex Type Dual Filter) Features Small size Low insertion loss High selectivity Hermetic seal Applications TDSCDMA How to Order SF T A SB A Type of Product (SAW Filters) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application Insertion Frequency Loss (db) Variation (db) VSWR Absolute Rejection (db) Operating Storage Temperature Temperature SF1519TASBA1 SF15217TASBA1 Balanced (Filter1) BAND39 (Filter2) BAND34 Filter1 BAND34 Filter2 BAND39 188MHz 2. max. 1. max. 2. max. 192MHz 21MHz 2.5 max. 1. max. 2. max. 225MHz 21MHz 2.5 max. 1. max. 2. max. 225MHz 188MHz 2. max. 1. max. 2. max. 192MHz 1MHz 1MHz 1MHz 15MHz 15MHz 1795MHz 1795MHz 182MHz 182MHz 184MHz 198MHz 25MHz 25MHz 211MHz 211MHz 25MHz 25MHz 3MHz 3MHz 45MHz 45MHz 6MHz 5min. 38min. 3min. 2min. 1min. 15min. 25min. 29min. 32min. 45min. 4min. 1MHz 113MHz 113MHz 1925MHz 1925MHz 195MHz 195MHz 199MHz 245MHz 275MHz 275MHz 211MHz 211MHz 217MHz 217MHz 25MHz 25MHz 4MHz 4MHz 6MHz 5min. 32min. 14min. 3.5min. 2min. 17min. 32min. 32min. 41min. 38min. 1MHz 113MHz 113MHz 1925MHz 1925MHz 195MHz 195MHz 199MHz 245MHz 275MHz 275MHz 211MHz 211MHz 217MHz 217MHz 25MHz 25MHz 4MHz 4MHz 6MHz 5min. 32min. 14min. 3.5min. 2min. 17min. 32min. 32min. 41min. 38min. 1MHz 1MHz 1MHz 15MHz 15MHz 1795MHz 1795MHz 182MHz 182MHz 184MHz 198MHz 25MHz 25MHz 211MHz 211MHz 25MHz 25MHz 3MHz 3MHz 45MHz 45MHz 6MHz 5min. 38min. 3min. 2min. 1min. 15min. 26min. 29min. 32min. 4min. 35min. 3 to +85 C 4 to +85 C Dimensions Recommended Land Pattern #9 (6.21) #8 #7 #6 (4.24) 1.5±.1 #9 #8 #7 #6 K ** * 1.1±.1.55 max. (Bottom View) 8.18± ± ±.1 (.75) # ±.1 (C.15) #7.39 ±.1 #8.39 ±.1 #9 (6.21) (4.25) (.75) ± ±.1 Test Circuit Unit : mm Input #9 Output (Filter1) 5 ohm Li 2 ohm #8 Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) PIN No. Function Input PIN No. #6 #7 #8 #9 Function Output (Filter2) Output (Filter2) Output (Filter1) Output (Filter1) #7 #6 Output (Filter2) 2 ohm Li*: 4.7nH
12 SAW Filters RF SAW Filters for TDSCDMA SF15 Series (Diplex Type Dual Filter) Characteristics Part No.: SF1519TASBA1 <BAND39> <BAND34> Part No.: SF15217TASBA1 <BAND34> <BAND39> Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
13 Wireless LAN/ Bluetooth SAW Filters Features Small size Low insertion loss High power durability Hermetic seal Applications Wireless LAN/ Bluetooth * Bluetooth Trademarks are owned by Bluetooth SIG Inc. How to Order SF M 5 UU A Type of Product (SAW Filter) 2 Package Type 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application SF142446M5UUA3 Unbalance WLAN/ Bluetooth Frequency 24MHz 2493MHz Insertion Loss (db) Variation (db) VSWR 2.3 max. 1.4 max. 2.1 max. 869MHz 894MHz 925MHz 96MHz Absolute Rejection (db) 1574MHz 1576MHz 185MHz 188MHz 211MHz 217MHz 5 min. 5 min. 38 min. 3 min. 28 min. 3 min. Operating Storage Temperature Temperature 2595MHz 2625MHz 3 to +85 C 4 to +85 C Rating Part No. Max Input Power (dbm) Condition SF142446M5UUA3 +24 max. 1,hours/ +65 C Dimensions Recommended Land Pattern 5.25 (Bottom View) K * * * 1.4± / ± ± ±.5 (.1) (.75) 5.25±.5.5±.5.5± ±.5 Test Circuit Unit : mm Port 2 Port 1 Lo RL Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) Tx/ Rx Ant Rs Li Condition: Rs=5ohm RL=5ohm LI=2.7nH Lo=2.7nH
14 Wireless LAN/ Bluetooth SAW Filters Characteristics Part No.: SF142446M5UUA3 Part No.: SF142446M5UUA Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
15 SAW Filters RF SAW Filters for Short Range Communication Device / SF16 Series Features Small size Low insertion loss High selectivity Hermetic seal Applications Short range device How to Order SF M 4 UU Type of Product (SAW Filter) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification Specifications Part No. Output Application SF14915M5UUA1 SF16868M4UU1 SF1698M4UU1 SF16923M4UUA2 Dimensions Unbalance Short range device Short range device Short range device Short range device 1.4± /.1 K * * *. 1.1±.1 RoHS Compliant Frequency Loss Insertion VSWR (db) Variation (db) 92MHz 3. max. 1.8 max. 2. max. 928MHz MHz 4. max. 2. max. 2.5 max MHz MHz 4. max. 2. max. 2.5 max MHz 919MHz 4. max. 3. max. 2.2 max. 928MHz.2875± ±.5 (.1) (.75) (Bottom View) 5.25±.5.5±.5.5±.5.3MHz 8MHz 8MHz 845MHz 845MHz 88MHz Absolute Rejection (db) 947MHz 992MHz 992MHz 12MHz 12MHz 12MHz 5 min. 45 min. 33 min. 13 min. 35 min. 45 min..1mhz MHz 93.92MHz MHz 12MHz MHz MHz MHz 12MHz 2MHz 35 min. 2 min. 2 min. 35 min. 2 min. MHz MHz MHz MHz 12MHz MHz MHz MHz 12MHz 2MHz 35 min. 2 min. 2 min. 35 min. 2 min. MHz 88MHz 9MHz 91MHz 94MHz 95MHz 1MHz 88MHz 99MHz 91MHz 915MHz 95MHz 1MHz 245MHz 245MHz 3MHz 3 min. 2 min. 15 min. 3 min. 1 min. 27 min. 27 min. 23 min ±.5 SF16 Series 1.6±.1 K * * * 1.4± /.1.4±.5.4±.5 3.4±.1.5±.5 Operating Storage Temperature Temperature 3 to +85 C 4 to +85 C.6±.1.5±.5 4.4±.1 Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) Balance Output INPUT OUTPUT OUTPUT Unbalance Output INPUT OUTPUT Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) INPUT OUTPUT Recommended Land Pattern 5.25 SF16 Series Unit : mm ±.5.5± Unit : mm Test Circuit SF16 Series Port 1 Rs Port 2 RL Input 5 ohms 5 ohms Condition: Rs=5ohm RL=5ohm Output : Input : Output, : Ground
16 SAW Filters RF SAW Filters for Short Range Communication Device / SF16 Series Characteristics Part No.: SF14915M5UUA1 Part No.: SF16868M4UU Part No.: SF1698M4UU1 Part No.: SF16923M4UUA Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
17 GNSS RF SAW Filters Features Small size Low insertion loss High selectivity Hermetic seal Applications GNSS How to Order SF M 5 UB A Type of Product (SAW Filter) 2 Package Size 3 Nominal Center Frequency 4 Spec. 5 Number of Terminals 6 Input/ Output 7 Custom Specification RoHS Compliant Specifications Part No. Output Application SF141575M5UBA1 SF141575M5UBB1 SF141575F5UUA1 SF141575F5UUC1 SF141582M5UUD2 Balanced Unbalanced GPS Rx GPS Rx GPS Rx GPS Rx GPS GLONASS COMPASS Frequency MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Insertion Loss (db) Variation (db) 1.6 max. 1. max. 2. max. 1. max. 1.2 max..6 max..8 max..6 max. 1.5 max. 2. max. 2.3 max. 2.2 max. VSWR (In/ Out) 1.6 max. / 1.6 max. 1.8 max. / 1.8 max. 1.7 max. / 1.7 max. 1.8 max. / 1.8 max. 2. max. / 2. max. 2. max. / 2. max. 2.2 max. / 2.3 max. 81MHz 96MHz 1429MHz 1453MHz Absolute Rejection (db) 151MHz 1525MHz 192MHz 198MHz 198MHz 24MHz 24MHz 25MHz 5 min. 35 min. 27 min. 41 min. 29 min. 46 min. 81MHz 1429MHz 1453MHz 1625MHz 192MHz 198MHz 96MHz 1453MHz 1525MHz 192MHz 198MHz 5MHz 5 min. 35 min. 3 min. 23 min. 5 min. 35 min. 843MHz 1429MHz 151MHz 192MHz 198MHz 25MHz 925MHz 151MHz 1525MHz 198MHz 25MHz 3MHz 4 min. 38 min. 3 min. 4 min. 4 min. 35 min. 824MHz 96MHz 15MHz 1525MHz 1625MHz 165MHz 171MHz 217MHz 2 min. 2 min. 2 min. 2 min. 1MHz 925MHz 925MHz 96MHz 1427MHz 1463MHz 185MHz 191MHz 192MHz 198MHz 241MHz 2483MHz 2. max. / 2. max. 4 min. 4 min. 4 min. 37 min. 39 min. 38 min. Operating Storage Temperature Temperature 3 to +85 C 4 to +85 C Dimensions Recommended Land Pattern 5.25 (Bottom View) 1.4± / ±.5 K * * *. 1.1± ± ±.5 (.1) (.75).5±.5.5± ±.5 Test Circuit <Balance Output Type> Unit : mm <Unbalance Output Type> Unit: mm K: Kyocera logo **: Identification no. * : Monthly Code : Index mark of ten days ( 1st1th, 11th2th, 21st31st) Balance Output INPUT OUTPUT OUTPUT Unbalance Output INPUT OUTPUT Port 1 Rs Condition: Rs=5ohm RL=1ohm Port 2 Balanced RL Port 3 Port 1 Rs Condition: Rs=5ohm RL=5ohm Port 2 RL
18 GNSS RF SAW Filters Characteristics Part No.: SF141575M5UBA1 Part No.: SF141575M5UBB Part No.: SF141575F5UUA1 Part No.: SF141575F5UUC Part No.: SF141582M5UUD Recommended Reflow Profile Temperature ( C) C max. 22 C min. 18±5 C 14±1 C 8 sec. max ±1 sec. 9±1 sec. 35±5 sec. Time (sec.)
19 SAW Devices Precautions 1. Operating Environment 1) Use products within the rated operating temperature, otherwise it may not satisfy electrical characteristics specifications. It might work initially, but there is a high possibility that it will cause degradation, breakdown and lower reliability. 2) This product is designed and manufactured with intention to be used in electronic devices for standard applications, but not in the following environment which may affect performance of the product. Be sure not to use products in the following conditions which may cause electrical characteristics and reliability degradation. Under corrosive gas (Cl 2, H 2 S, NH 3, SOx, NOx, etc.) Under volatile and inflammability gas Dusty environment Direct exposure to water, or high humidity environment Direct sunlight High static electricity, or high electric intensity. Please consult with us if you intend to use products in the above environment. 3) This product can not be used in liquid such as water, oil, chemical and organic solvent. 4) Operate under rated voltage, otherwise it may not satisfy electrical characteristics specifications. It might work initially, but there is high possibility that it will cause degradation, breakdown and lower the reliability. 5) Avoid contact with other components on the board, since outer resin is not intended for the insulation with other components. 6) There might be a strong electrical charge when rapid thermal change is applied to this product. This charge may damage the product and the peripheral circuit. Therefore, insert load discharge path between input/output and ground. 7) Do not apply larger load greater than the one loaded in the environmental test. It might work initially, but there is a high possibility that it will cause degradation, breakdown and lower the reliability. 8) Do not use transfer mold for this product. It may break hermetic seal and cause abnormal operation. Please consult us when molding by resin.
20 SAW Devices Precautions 2. Storage instructions 1) Do not store products in the following environment which may deteriorate solderability. Under corrosive gas (Cl 2, H 2 S, NH 3, SOx, NOx, etc.) Under volatile and inflammability gas Dusty environment Direct exposure to water, or high humidity environment Direct sunlight High static electricity, or high electric intensity Please consult with us if you intend to use products in the above environment. 2) Store products under normal temperature and humidity in the sealed or unopened package. Storage of products for over 12months after shipment may deteriorate solderability, and it is advised to perform solderability test before use. Also, be cautioned that color of electrode might change after a long term storage. 3) Open the sealed pack just before use. Practice assembly within 168 hours after opening the pack, and in the condition of 53deg.C and below 6%RH. 4) Stacking the box too high may cause fall over. It is advised to stack the box at the maximum of 5 boxes. 3. Handling instructions 1) Do not apply larger vibration or shock greater than specified, since it may cause degradation, breakdown and lower reliability. 2) Do not apply larger shock or load greater than specified, while carrying the board with products mounted. 3) Take appropriate measure to avoid static electricity and high voltage when handling products, since it may cause degradation or damage to the products. 4) Do not handle this product with bear hands. 4. Assembly instructions 1) Place products in the place to avoid stress from bending and camber of the board. There may be a large stress or shock when the product is placed near the connection parts with other outer parts. 2) Please do not apply larger stress greater than the one loaded in the environmental test when mounting on the board. 3) Make sure to solder all electrodes to the board, otherwise it may cause lower electrode strength.
21 Tape & Reel Specifications Tape & Reel Specifications SAW Duplexers/ SAW Filters SAW Duplexers SAW Filters (Unit: mm) T A P E SD18 SD2 SF14 SF15 SF16 SF18 SF2 A 2.±.5 2.±.5 2.±.5 2.±.5 2.±.5 2.±.5 2.±.5 B 4.±.1 4.±.1 4.±.1 4.±.1 4.±.1 4.±.1 4.±.1 C φ1.5+.1/ 1.5±.1 φ1.5±.1 1.5±.1 1.5±.1 φ1.5+.1/ 1.5±.1 D 4.±.1 4.±.1 4.±.1 4.±.1 4.±.1 4.±.1 4.±.1 E 3.5±.5 3.5±.5 3.5±.5 3.5±.5 3.5±.5 3.5±.5 3.5±.5 F 1.75± ± ± ± ± ± ±.1 G 8.±.1 8.±.2 8.±.2 8.±.2 8.±.2 8.±.1 8.±.2 H φ.8±.5 1.1±.1 φ.5±.5.5±.1 1.1±.1 φ.8±.5 1.1±.1 J 2.5± ±.1 1.7±.1 1.8±.1 1.9±.1 2.5± ±.1 L 1.7±.1 1.8±.1 1.4±.1 1.4± ±.1 1.7±.1 1.8±.1 N.85+/.5.7±.1.8±.1.7±.1.95±.2.85+/.5.7±.1 O.2±.5.2±.5.2±.5.2±.5.25±.5.2±.5.2±.5 P φ178±2 φ178±2 φ178±2 φ178±2 φ178±2 φ178±2 φ178±2 Q φ6±2 φ6±2 φ6±2 φ6±2 φ6±2 φ6±2 φ6±2 R E R φ13±.2 φ13±.2 φ13±.2 φ13±.2 φ13±.2 φ13±.2 φ13±.2 E S φ21±.8 φ21±.8 φ21±.8 φ21±.8 φ21±.8 φ21±.8 φ21±.8 L U 2±.5 2±.5 2±.5 2±.5 2±.5 2±.5 2±.5 W 9.5±1 9.5±1 9.5±1 9.5±1 9.5±1 9.5±1 9.5±1 Qty E F Feed Direction C B A G J L O N D H W U S R Q P <Reel Dimensions>
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF
Nov 7, 2006 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 9 SPECIFICATION ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-19100328 4/14/06 Added recommended PCB layout and plots. 6/2/06 Added Tape and Reel
SPECIFICATION. Surface Acoustic Wave Filter SFX897WZ102 WISOL. hong, Sung-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. WISOL PART No. DOC. No. SMS-51-L-SFT D0-67 DATE July 8, 2013 REVISION 001 WISOL Kim, Jong-Hwan hong, Sung-Su Chun, Hun-Chul ISSUED BY CHECKED
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM
June 26, 2006 DIELECTRIC CERAMIC DUPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION ITEM: DIELECTRIC CERAMIC DUPLEX FILTER PART NUMBER: CFDM-0902094710 Application: GSM 900 Duplexer ISSUED CHECKED CHECKED
SPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-66 DATE June 30, 2014 WISOL. Byun, Kyung-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE June 30, 2014 REVISION Preliminary WISOL Kim, Kyung-Sik Byun, Kyung-Su Choi. Jae hyeong ISSUED BY APPROVED BY
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF ROHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER CF-14871365 ROHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-13501505 RoHS ISSUED CHECKED CHECKED CHECKED APPROVED 12/14/09 kn 10/25/12 DS 11/15/12
SPECIFICATION FOR APPROVAL
FEB 25, 2004 CERAMIC DIPLEX FILTER SPECIFICATION 1 OF 6 SPECIFICATION FOR APPROVAL ITEM: CERAMIC DIPLEX FILTER PART NUMBER: CFD-122715756 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS Inc FEB 25,
SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-22505105 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 7/6/07**
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS PART NUMBER:CF-10300024 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 6/04/04 ** 5/13/2010 SRJ 5/13/2010
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE. CERAMIC FILTER PART NUMBER: CF RoHS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-10000064 RoHS ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN 1/31/11 DS
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC NOTCH FILTER PART NUMBER: CFN-13503 Revision Made: ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN
Applications. Car audio. Robo
Rotary Position Sensor High Rotational Life Type Features High Durability: 1M cycles Pb Free Soldering: 260 C Operating Temperature: -40 C to +85 C Terminal Shape: SMD Type and Lead Type Rotational Rotor:
SPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-14 DATE March 19, 2013 REVISION 000 WISOL. Hong, Seong-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. WISOL PART No. DOC. No. SMS-51-L-SFT FX-14 DATE March 19, 2013 REVISION 000 WISOL Hong, Byung-Chul Hong, Seong-Su Jeon. Hyeon Cheol ISSUED
Approval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
Multilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE
Oct 25, 2007 DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE ITEM: DIELECTRIC CERAMIC FILTER PART NUMBER: CF-14200604 ISSUED CHECKED CHECKED CHECKED APPROVED FILTRONETICS
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015
![MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015](/thumbs/96/128290498.jpg "MLG1608 Type. Inductors for High Frequency Circuits. Caution. MLG Series (For automobiles) Multilayer Ceramic [0603 inch]* December 2015")
December 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLG Series (For automobiles) MLG1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] Caution Nov.4, 2015 Dec.29, 2016 Jan.30, 2017 (2/12)
SA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]
![July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]](/thumbs/80/81223702.jpg "July terminal Filters. For Large-current Power Line. YFF-HC Series [1206 inch]* Feed through filter. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s July 215 3-terminal Filters For Large-current Power Line YFF31HC 3216 [126 inch]* Feed through filter * Dimensions Code JIS[EIA] (1/4) 3-terminal Filters For Large-current Power
February Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]
![February Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]](/thumbs/75/71548206.jpg "February Inductors for High Frequency Circuits. Multilayer Ceramic. MLK Series. MLK0603 Type [0201 inch]* * Dimensions Code JIS[EIA]")
February 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series MLK0603 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before using these products,
Thin-Film Directional Couplers
6 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF LGA Coupler is based on thin-film multilayer technology. The technology provides a miniature part with
Reference Only. Inductance Frequency (μh) Tolerance Typ Max (MHz min.) 85 *
P.1/10 CHIP COIL (CHIP INDUCTORS) LQM2HPN G0L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2HPN_G0 series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 2H P N
SA Series Breaker (Surface Mount Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE S A 0 0 77SB0 X 2 4 6 L Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Surface mount n Overtemperature and overcurrent protection for lithium polymer
December Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]
![December Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]](/thumbs/79/79705780.jpg "December Inductors for high frequency circuits. Multilayer ceramic. MLG series (for automotive) MLG1005S type. * Dimensions Code JIS[EIA]")
I N D U C T O R S December 2017 Inductors for high frequency circuits Multilayer ceramic MLG series (for automotive) MLG1005S 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015
![MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015](/thumbs/72/66915847.jpg "MLK1005 Type. Inductors for High Frequency Circuits. MLK Series (For automobiles) Multilayer Ceramic [0402 inch]* January 2015")
January 2015 Inductors for High Frequency Circuits Multilayer Ceramic MLK Series (For automobiles) MLK1005 1005 [0402 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS Before
November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]
![November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]](/thumbs/75/72156386.jpg "November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series. MHQ1005P type. * Dimensions code: JIS[EIA]")
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS Before using
WLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]
![February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]](/thumbs/85/91739679.jpg "February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0402P Type. * Dimensions Code JIS[EIA]")
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0402P 0402 [01005 inch]* * Dimensions Code JIS[EIA] (2/16) REMINDERS FOR USING THESE PRODUCTS Before
November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]
![November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]](/thumbs/77/74658646.jpg "November Inductors for high frequency circuits. Multilayer ceramic. MHQ-P series (for automotive) MHQ1005P type. * Dimensions code: JIS[EIA]")
I N D U C T O R S November 2017 Inductors for high circuits Multilayer ceramic MHQ-P series (for automotive) MHQ1005P 1005 [0402 inch]* * Dimensions code: JIS[EIA] (2/20) REMINDERS FOR USING THESE PRODUCTS
Reference Only. 1. Scope This reference specification applies to LQM2MPN_G0L series, Chip Coil (Chip Inductors).
Spec No. JELF243B-22L-1 P1/9 CHIP COIL (CHIP INDUCTORS) LQM2MPN GL REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQM2MPN_GL series, Chip Coil (Chip Inductors). 2. Part Numbering
February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]
![February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]](/thumbs/79/79864618.jpg "February Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-P Series. MLG0603P Type. * Dimensions Code JIS[EIA]")
I N D U C T O R S February 2017 Inductors for High Frequency Circuits Multilayer Ceramic MLG-P Series MLG0603P 0603 [0201 inch]* * Dimensions Code JIS[EIA] (2/17) REMINDERS FOR USING THESE PRODUCTS Before
Reference Only. *B: Bulk packing also available. Inductance. Tolerance M:±20% N:±30% 0.150±25% 1.0 * * N:±30% 0.23±25% 0.8 *2 0.
CHIP COIL (CHIP INDUCTORS) LQM21PN GRD REFERENCE SPECIFICATION P.1/9 1. Scope This reference specification applies to LQM21PN_GR series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 21 P N 1R
Ratings 0402 inch size : Type ERBRD ERBRD R X 0R25 0R3 0R37 0R50 0R75 R00 R25 R50 2R00 2R50 3R00 Rated Current (A)
Micro Chip Fuse Type: ERBRD Features Small size Fast-acting and withstanding in-rush current characteristics RoHS compliant Approved Safety Standards UL248-4 : File No.E94052 c-ul C22.2 No.248-4 : File
High Frequency Winding Type LQW15A/LQW18A Series. Rated Current (ma)
Chip Coils High Frequency Winding Type LW15A/LW18A Series LW15A_00 Series The LW15A series consists of air core chip coil using a miniature alumina core. The tight inductance tolerance (+0.2nH, +%) is
Design number. RC filtering circuit for USB interface
hip R Networks hip R Networks Type: EZDLU n Features. Smallest SMD R/ filter for USB interface l Including 2 circuits of p type R/ filter in a chip (hip size:3.2 mm.6 mm ) l Space saving and low placing
July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]
![July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]](/thumbs/78/76817722.jpg "July Inductors for High Frequency. Multilayer Ceramic. MLG series. * Dimensions Code JIS[EIA]")
July 2013 Inductors for High Frequency Multilayer Ceramic MLG series MLG0603S MLG1005S MLG1608 0603 [0201 inch]* 1005 [0402 inch] 1608 [0603 inch] * Dimensions Code JIS[EIA] (1/23) REMINDERS FOR USING
September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]
![September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]](/thumbs/91/106105501.jpg "September Inductors for High Frequency Circuits. Multilayer Ceramic. MLG-Q, MLG-Pseries. * Dimensions Code JIS[EIA]")
September 2014 Inductors for High Frequency Circuits Multilayer Ceramic MLG-Q, MLG-Pseries MLG0402P MLG0402Q MLG0603P 0402 [01005 inch]* 0402 [01005 inch] 0603 [0201 inch] * Dimensions Code JIS[EIA] (2/38)
Chip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]
![Chip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]](/thumbs/80/80944122.jpg "Chip beads. For power line Large current/low DC resistance type. MPZ-H series. MPZ1005-H type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s September 27 Chip beads For power line Large current/low DC resistance type MPZ-H series MPZ5-H type MPZ5-H 5[42 inch]* * Dimensions code JIS[EIA] (2/) REMINDERS FOR USING THESE
Wire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
FC Type 2520 (1008) Dimensions in mm (not to scale) Marking Recommended Land Pattern in mm (not to scale) ± ± ± ±0.1
3. General Use FC, F, F Features General use wire wound, resin molded chip inductor. Capable of being Re-fl ow or fl ow soldered. ide line-up from 2520 to 4532 case sizes. Good for mounting. RoHS compliant
Chip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]
![Chip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]](/thumbs/75/72053251.jpg "Chip beads. For power line Soft termination. KPZ-HR series (for automobiles) KPZ1608-HR type. * Dimensions code JIS[EIA]")
E M C C o m p o n e n t s March 217 Chip beads For power line Soft termination KPZ-HR series (for automobiles) KPZ168-HR 168[63 inch]* * Dimensions code JIS[EIA] (2/1) REMINDERS FOR USING THESE PRODUCTS
Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz
NEW Subminiature Coaxial Switch 1.6 mm High, DC to 6 Hz MS-156NB Series Overview Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is
October Isolator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Isolator SMD CU4S0506 Series 5x5mm* * Dimensions Code JIS Isolator SMD Product compatible with RoHS directive Overview of CU4S0506 Series PART NUMBER CONSTRUCTION CU4S0506
RF Type 5 (04) Dimensions in mm (not to scale) Recommended Land Pattern in mm (not to scale) 0.2± ± ± ±0.05 Standard Packing uantit
Chip Inductors High Frequency Use (Non Magnetic Core) Type: ELJRF ELJRE Features High frequency capability due to its non magnetic core. Capable of being Re-fl ow or fl ow soldered. Unique Ceramic Core/Laser-cut
SMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
After 5 seconds at +260 C (with pre-conditioning) (±20% for 0402 & 0603 case sizes) After 500 hours at 60 C and 90 ~ 95% RH Humidity
FEATURES SIZES K(0402), J (0603), D (0805) AND C (1008) HIGH Q, HIGH CURRENT AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE* HIGH AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC TAPE PACKAGE
Data sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
Multilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
VLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
ArcTite. single path to optimal performance. Ultra-low profile bends
ArcTite brochure_8-pages_011918_r3.qxp_layout 1 1/20/18 12:13 PM Page 1 www.dynawave.com single path to optimal performance ArcTite assemblies maintain electrical performance even after bending...ensuring
SolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
Notice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2014. All of the contents specified herein
Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
DC-DC Converter Specification MYFSP3R303FMS
DC-DC Converter Specification MYFSP3R303FMS 1 1. Application This specification applies to DC-DC Converter for telecommunication / data-communication equipment, MYFSP3R303FMS. For any other application,
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528ZGS-AMT Green Features Industry standard PLCC-2 package. High reliability LED package. Wide viewing angle. Single color. Suitable for all SMT assembly
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
Power Splitter/Combiner
Ultra-Small Ceramic Power Splitter/Combiner 2 Way-90 50Ω 2500 to 4500 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 15W* max. *
October Circulator SMD. CU4S0506 Series. 5x5mm* * Dimensions Code JIS
R F C o m p o n e n t s October 2015 Circulator SMD 5x5mm* * Dimensions Code JIS Circulator SMD Product compatible with RoHS directive Overview of PART NUMBER CONSTRUCTION CU4S0506 C - - Series name A
Japan China. Recommended Applications AV equipment, Wireless communication equipment and various general electronic equipment.
4. High Power Type PF, PC, PA, PB Japan China Features Low DCR and large current, suitable for power circuit. Wire wound and resin molded chip inductor. (PC, PA, PB type) Non wound structure using unique
Multi-Layer Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) For DC/DC Converter Application ORDERING CODE IP R M P S 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA. x. mm. X.
ANT025020LCT1575MA1. Multilayer Antenna (Triple Band type) For MHz / MHz / MHz. 2.5x2.0mm [EIA 1008]* September 2016
![ANT025020LCT1575MA1. Multilayer Antenna (Triple Band type) For MHz / MHz / MHz. 2.5x2.0mm [EIA 1008]* September 2016](/thumbs/90/104344313.jpg "ANT025020LCT1575MA1. Multilayer Antenna (Triple Band type) For MHz / MHz / MHz. 2.5x2.0mm [EIA 1008]* September 2016")
R F C o m p o n e n t s September 216 Multilayer Antenna (Triple Band type) For 1574-1577MHz / 24-2484MHz / 515-585MHz ANT252LCT1575MA1 2.5x2.mm [EIA 18]* * Dimensions Code JIS[EIA] Multilayer Antenna
Automotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
Reference Only. Spec.No. JENF243H-0008M-01 P 1/ 14. Rated Current. Withstanding Voltage 20A 125V (DC) (DC) 250V (DC) 20A (DC) 20A 40V (DC) (DC) (DC)
Spec.No. JENF243H-0008M-01 P 1/ 14 SMD Block Type EMIFIL BNX02-01 Reference Specification 1.Scope This reference specification applies to SMD Block Type EMIFIL. 2.Part Numbering BN X 022-01 L Product ID
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Features Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Industry standard PLCC-4 package. High reliability LED
Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Features Industry standard PLCC-2 package. High reliability LED package. Wide viewing angle. Single color. Suitable for all SMT assembly and solder process. Available on
CPTC Thermistor:TPM-P Type
CPTC Thermistor:TPM-P Type Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition:
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
1mm Pitch Cable-to-Board Connectors supporting LVDS signal
NEW 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX Series Space saving, Equal length transmission lines Patent pending Fig.1 Termination side:.5 mm pitch, 1-row construction Mating side:
2.5X2.0mm SURFACE MOUNT LED LAMP. PRELIMINARY SPEC Part Number: KT-2520SE9ZS-RV Reddish-Orange. Typical Applications. Features. Package Dimensions
2.5X2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: KT-2520SE9ZS-RV Reddish-Orange Features Dimension: 2.5mmx 2.0mm x 0.8mm. Low thermal resistance. Ceramic package with silicone resin. Small
Cylinder Type Lithium Ion Capacitors LIC2540R3R8207
Powered by TCPDF (www.tcpdf.org) Spec Sheet Cylinder Type Lithium Ion Capacitors LIC2540R3R8207 ENERGY DEVICE (SUPER CAPACITORS) Features Item Summary 3.8(3.5)V, 2.2V, 200F±20%, Less than 0.05Ω Lifecycle
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC
Anti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
TOL-32EUG3W9-A. LED Lamp 2015/04/14 DL2EF3YG103-N J.F.FENG J.F.FENG Q.Y.HUANG
TOL-32EUG3W9-A LED Lamp 2015/04/14 DL2EF3YG103-N J.F.FENG J.F.FENG Q.Y.HUANG REV.: A-1 Prepared by J.F.FENG Released Date: 2015/4/15 Doc No : GL1412001 Page 1/7 TOL-32EUG3W9-A Lamp LED Part Number Material
LC Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 0 8 1 2 2 1 5 IX L C 7 7 AY 1 Features n Formerly a product n Miniature Thermal Cutoff (TCO) device n Low current type n Overtemperature and overcurrent protection for
Rotary Position Sensors
RE.pdf Rotary Position Sensors SMD/Lead Dust-proof Type 12mm Size SV01 Series Features 1. Dust-proof construction protects the interior from dust, which maintains stable characteristics. 2. Compliant to
COUPLING MAINLINE LOSS * (db) (db) Max. L M U U 1 L M U U 1 L. Max.
Surface Mount top hat Directional Coupler 75Ω, 20dB coupling, 5 to 1250 MHz Maximum Ratings Operating Temperature -40 C to 85 C Features very flat coupling Storage Temperature -55 C to 100 C very broadband,
Product Code Size Number of Type Characteristics Nominal Impedance Form Suffix Terminals. High Impedance Type. Low DCR Type
Type: /P N Features urst/radiation noise fi ltering for audio circuits The optimally magnetic-coupled ferrite beads allow for the fi ltering of both common and normal mode noises The strong multi-layer
Coil type EMI Filters
oil type MI Filters (Digital Noise Filters) Type: K 8 case size, 6 A rated current (KA) and A rated current (K) High SD suppression with varistor and included coils asily discernible part number written
FrelTec GmbH. Wire Wound Ceramic Chip Inductors SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Ceramic Chip Inductors SMD 8/2/2017 1/15 GmbH www.freltec.com SPECIFICATION Part Number 091 02 * 101 * J * S * T05 ** _ Type Size Value Toleranc
R Z18 Series : SMB CARLOCK
.. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY
NR Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE 6 7 5 1 1 2 1 5 C N R 7 7 C B 0 1 1 5 5 C N R 7 2 A B 0 Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type n Overtemperature and overcurrent
WW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
Metal Oxide Varistor:TVM-B Series
Features 1. RoHS compliant 2. High surge suppress capability 3. EIA size 0402 ~ 2220 4. Operating voltage: 5.5 ~ 85 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
MYPMA01218RCF-CAB Non-isolated type
FEATURES 120W DC-DC converter(216w peak) Output Voltage:12V Low ripple and Low surge output. Input Voltage:36V-75V Working Temperature -20 - +85 High Efficiency up to 95% Compact Size 86.5x122.4x35.4mm
Wire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
NTC Thermistor:TSM Series
Features 1. RoHS & HF compliant 2. EIA size: 0201, 0402, 0603, 0805 3. Highly reliable structure 4. Operating temperature range: -40 ~ +125 5. Wide resistance range 6. Cost effective 7. Agency recognition:
3535HP LEDs Color Type
3535HP LEDs Color Type Outline:3.5*3.5*2.0mm High efficiency Good thermal dissipation & optical uniformity Table of Contents: Features---------------------------------------------------- 1 Product Code----------------------------------------------
Typical Performance Data
Surface Mount Attenuator/Switch 75Ω Bi-Phase to Maximum Ratings Operating Temperature -4 C to 85 C Storage Temperature -55 C to C Control Current 3mA Permanent damage may occur if any of these limits are
Specification Status: Released
PAGE NO.: 1 of 9 Specification Status: Released BENEFITS ESD protection for high frequency applications (HDMI 1.3) Smaller form factor for board space savings Helps protect electronic circuits against
Ceramic PTC Thermistor: PPL Series
Features 1. RoHS compliant 2. Radial leaded devices 3. Wide resistance range in telecom area from 7 to 50Ω 4. Compliant with ITU-T standards 5. Operating temperature range: 0 ~ +60 C (V=Vmax) -25 ~+125
1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light