Common Rail Injection for CAT MaK Engines
|
|
- Cora Gregory
- 5 years ago
- Views:
Transcription
1 Stefan Haas Engineering Supervisor Fuel Systems / Control & Monitoring Caterpillar Motoren GmbH & Co. KG Off-Highway Engines Conference Frankfurt/Main, Germany 28 June
2 Content Introduction Systems Overview (Generation 1) Technical Data Mechanical System Electronical System Performance Results Operational Experience Examples Further Improvements Future Developments (Generation 2) 2
3 Introduction Development of Caterpillar Common Rail - Why? Development of a fully flexible fuel injection system Part of a technology tool box for future products Enabling key objectives of upcoming products Maintain or improve current engine performance at more stringent emission levels (i.e. acceleration, fuel consumption, smoke reduction) Enable future power density increase Easy fuel system adaptation to different engine types, applications, emission technology, special customer needs 3
4 Introduction NOx Emissions Legislation 16 IMO I N O x E m is s io n (g /k W h ) Incentives IMO II IMO III, Open Sea? Incentives? ECA s Time (Year) 4
5 Introduction SOx Emissions Legislation 5 Sulphur Content in Fuel (%) Average Today ECA s Open Sea Time (Years) 5
6 Content Introduction Systems Overview (Generation 1) Technical Data Mechanical System Electronical System Performance Results Operational Experience Examples Further Improvements Future Developments (Generation 2) 6
7 Technical Data Joint development of L Orange GmbH and Caterpillar Motoren GmbH & Co. KG for engine types M 32 and M 43 Rated rail pressure: bar Injection quantity per stroke at rated condition: / mm³ Multi-shot capability (pre, main, post) All fuels acc. ISO8217 F-DMA up to ISO8217 F-RMK55 Fuel temperature at pump inlet: C Typical fuel viscosity operating range: 2,5 16 cst Maximum cold start viscosity: 145 cst (F-RMK55 HFO at 80 C) 7
8 Mechanical System Leak Detection Unit Combination Valve Safety Valve High Press. Line Rail - Rail Flow Limiter Connection to High Pressure Pumps 8
9 Electronical System Core System Injector booster High pressure closed loop control Speed Timing Measurement Performance System Intake manifold pressure (Charge air) Intake manifold temperature Exhaust temperature Turbine inlet temperature Engine coolant temperature Fuel rail pressure Atmospheric pressure 9
10 Content Introduction Systems Overview (Generation 1) Technical Data Mechanical System Electronical System Performance Results Operational Experience Examples Further Improvements Future Developments (Generation 2) 10
11 Performance Results Fuel Consumption 11
12 Performance Results Engine Behaviour Improved torque at lower speed and part load compared to standard combinator curve 12
13 Performance Results Soot Emissions 13
14 Content Introduction Systems Overview (Generation 1) Technical Data Mechanical System Electronical System Performance Results Operational Experience Examples Further Improvements Future Developments (Generation 2) 14
15 Operational Experience Installation Parallel running on power grid Preheating and start ability on HFO Fuel system reliability Mechanical parts (fuel types, operation regime) Electrics & Electronics (vibrations, fault identification) Fuel filtration Cleanliness 15
16 Operational Experience - Examples Engine start ability in HFO mode Extended customer requirement 20 sec from engine start to rated speed (Standard: 30 sec) Modifications made on Fuel injection system preheating Software Improvements achieved on Engine start ability from initially 28.5 sec to less than 20 sec 16
17 Operational Experience - Examples Engine start ability Engine start after 8.5 hrs standstill on HFO RPM in approx sec Blue: actual speed Green: desired speed 17
18 Operational Experience - Examples High Pressure Pump Seized pump elements due to formation of deposits Composition of fuels in use suspected Modifications on pump element introduced No further pump failures 18
19 Operational Experience - Examples Injector Stable injector behavior over the entire lifetime 19
20 Further Improvements Fuel filtration (to prevent sudden injector failures) Mesh size Specific filter load, especially under HFO conditions Cleanliness during assembly / maintenance High requirements on procedures Maintainability / servicability Fault finding, cable and pipe routing and fastening 20
21 Content Introduction Systems Overview (Generation 1) Technical Data Mechanical System Electronical System Performance Results Operational Experience Examples Further Improvements Future Developments (Generation 2) 21
22 Future Developments (Generation 2) Further rail pressure increase For EGR technology to prevent smoke To improve full load fuel consumption Rail volume close to injector to enable higher pressures maintaining multi-shot capability Further fine tuning to improve NOx-fuel consumption tradeoff To allow higher power densities Low-sulphur-fuel capability increase 22
23 Thank you for your attention! 23
Wärtsilä NO X Reducer. Environmental Efficiency
Wärtsilä NO X Reducer Environmental Efficiency Environmental efficiency Stringent legislations concerning NO X. Retroactive legislations are introduced. Regulations in the shape of fees, taxes or incentive
More informationMIXTURE FORMATION IN SPARK IGNITION ENGINES. Chapter 5
MIXTURE FORMATION IN SPARK IGNITION ENGINES Chapter 5 Mixture formation in SI engine Engine induction and fuel system must prepare a fuel-air mixture that satisfiesthe requirements of the engine over its
More informationENVIRONMENT. The Diesel Engine and the Environment
ENVIRONMENT The Diesel Engine and the Environment David Steffens Wartsila North America, Inc. Session Chair Wayne Cole, Cole Engineering September 16-17, 2003 Houston, Texas Introduction The diesel engine
More informationCIMAC Position Paper
06 2015 CIMAC Position Paper New 0.10% sulphur marine (ECA) fuels Introduced to the market to meet the SO x ECA fuel sulphur specification of maximum 0.10% By CIMAC WG7 Fuels This publication is only for
More informationKBB Service Information S44 and S45
Service Information No. 08 / 04 Date: 27-AUG-2004 KBB Turbocharger KBB Service Information S44 and S45 M20 / M25 1. KBB Service Information S44 Maintenance interval for MDO / HFO Valid for TC type: R2-2
More informationPRODUCT INFORMATION SHEET. Exhaust Gas Recirculation 3 and High Pressure 3 - Tank treatments
Page 1 of 11 23379 / 12193 WYNN'S EXHAUST GAS RECIRCULATION 3 & HIGH PRESSURE 3 Date of Issue October 2008 PRODUCT INFORMATION SHEET WYNN'S EXHAUST GAS RECIRCULATION 3 AEROSOL & HIGH PRESSURE 3 Product
More informationGlobal Greenship, September 2009 Low Sulfur Fuel and Emissions Advances
Global Greenship, September 2009 Low Sulfur Fuel and Emissions Advances ECA and SECA Trends Top Container Ports : 1. Singapore 2. China, Shanghai 3. China, Hong Kong 4. China, Shenzhen 5. South Korea,
More informationThis information covers the design and function of the intake and exhaust systems for the Volvo D16F engine.
Volvo Trucks North America Greensboro, NC USA Intake and Exhaust System DService Bulletin Trucks Date Group No. Page 2.2007 250 35 1(6) Intake and Exhaust System Design and Function D16F W2005773 This
More informationInternationaler Congress für Schiffstechnik
Internationaler Congress für Schiffstechnik Technologien zur Reduzierung der Betriebskosten bei Einhaltung aktueller und zukünftiger Emissionen, Peter Balle, Hamburg, 10.09.2015 CourtesyMAN of Nordic Diesel
More informationFUEL SYSTEM FUEL INJECTION SYSTEM. Electronic Control of Fuel System
07 5 FUEL INJECTION SYSTEM Electronic Control of Fuel System IMV valve Low and high pressure pump Fuel temperature sensor High pressure pump Water separator Water detection sensor Fuel filter System composition
More informationEGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power
GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 4 TH 2004 EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power TEAM OF WORK: G. GIAFFREDA, C. VENEZIA RESEARCH CENTRE ENGINE ENGINEERING
More informationAdditions, Revisions, or Updates
1 12 02-12 SUBJECT DATE Test E - Three-Filter Fuel System December 2012 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0084 DD Platform Test E - Three-Filter
More informationIntake and Exhaust System, Design and Function
Volvo Trucks North America Greensboro, NC USA DService Bulletin Trucks Date Group No. Page 12.2006 250 34 1(6) Intake and Exhaust System Design and Function D13F Intake and Exhaust System, Design and Function
More informationTechnical Specification
Technical Specification including performance data Project 3 x 9CM25 rev 2. consisting of 3 Caterpillar Diesel Generator sets Type 9CM25 with site output of: 2475 bkw at each engine flywheel rated 750
More informationTechnical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance
Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D7.3L DI LD / D7.3L D-Tronic (Mercury MerCruiser D7.3L LD D-Tronic and D7.3L
More informationWärtsilä 46F PRODUCT GUIDE
Wärtsilä 46F PRODUCT GUIDE Copyright by WÄRTSILÄ FINLAND Oy All rights reserved. No part of this booklet may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying,
More informationInternal Combustion Engines
Emissions & Air Pollution Lecture 3 1 Outline In this lecture we will discuss emission control strategies: Fuel modifications Engine technology Exhaust gas aftertreatment We will become particularly familiar
More informationCopyright by WÄRTSILÄ FINLAND Oy
Copyright by WÄRTSILÄ FINLAND Oy All rights reserved. No part of this booklet may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying, recording, taping or
More informationDiagnostic Trouble Codes (continued) SAE Defined Codes
78 SAE Defined Codes P01XX Fuel and Air Metering P0100 Mass or Volume Airflow Circuit Problem P0101 Mass or Volume Airflow Circuit Range or Performance Problem P0102 Mass or Volume Airflow Circuit Low
More informationTanker Operator Hamburg Conference Cases of increased wear due to Cat Fines avoidable by on-board fuel condition
Tanker Operator Hamburg Conference 2015 Cases of increased wear due to Cat Fines avoidable by on-board fuel condition monitoring Dr. Frank Bernier Director Sales and Marketing Background Information Cat
More information1,9 ltr-tdi-industrial Engine
1,9 ltr-tdi-industrial Engine Technical Status: 4/1999 Contents Combustion process................3 Injectors.........................4 Needle Lift Sender.................5 Air-mass Flow Meter...............6
More informationCERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY - MARINE ENGINEER OFFICER
CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY - MARINE ENGINEER OFFICER EXAMINATIONS ADMINISTERED BY THE SCOTTISH QUALIFICATIONS AUTHORITY ON BEHALF OF MARITIME AND COASTGUARD AGENCY CHIEF ENGINEER (UNLIMITED)
More informationGeneral In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel
Important This Technical Data Sheet and the corresponding Installation Instructions provide important information to ensure the installed engine will operate according to the design specification in the
More information1200 Series 1206F-E70TTA Industrial Open Power Unit EU Stage IV, EPA Tier 4 Final kw / hp
The addition of the 1206F IOPU to our 1200 Series ensures our customers have a complete power solution ready and available when they need to change over to the next stage of emissions legislation EU Stage
More informationReducing Exhaust Emissions from Wärtsilä Marine Engines Moottoritekniikan seminaari Teknologiateollisuus ry 18 May 2010 Göran Hellén
Reducing Exhaust Emissions from Wärtsilä Marine Engines Moottoritekniikan seminaari Teknologiateollisuus ry 18 May 2010 Göran Hellén 1 Reducing exhaust emissions from Wärtsilä marine engines 18 May 2010
More informationPowertrain Efficiency Technologies. Turbochargers
Powertrain Efficiency Technologies Turbochargers Turbochargers increasingly are being used by automakers to make it possible to use downsized gasoline engines that consume less fuel but still deliver the
More informationTechnical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance
Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L 230 (4.2 MS 230 and 4.2 MI 230 Model) IMPORTANT: To comply with regulations
More informationTier III considerations
Tier III considerations IMO Tier III Regulations NECA IMO Tier III Regulation for NOx From 2016 in the North American Emission Control Areas or the US Caribbean Sea Emission Control Areas It is a fact!
More informationENGINE MANAGEMENT SYSTEM. System Sensors
ENGINE MANAGEMENT SYSTEM System Sensors Throttle position sensor - Used to relay throttle position information to the ECU. Throttle opening angle is used by the ECU to determine fuelling and ignition requirements
More informationModule7:Advanced Combustion Systems and Alternative Powerplants Lecture 32:Stratified Charge Engines
ADVANCED COMBUSTION SYSTEMS AND ALTERNATIVE POWERPLANTS The Lecture Contains: DIRECT INJECTION STRATIFIED CHARGE (DISC) ENGINES Historical Overview Potential Advantages of DISC Engines DISC Engine Combustion
More informationBFT CATERPILLAR TURBO INSTALLATION MANUAL
EXHAUST MANIFOLDS BFT CATERPILLAR TURBO INSTALLATION MANUAL CATERPILLAR 3406B, 3406C, 3406E, C15 & C16 (1989-2003) PART# 56250 i INTRODUCTION The BFT 1 for Caterpillar 3406B, 3406C, 3406E, C15 and C16
More informationSTARTER COMPONENTS FOR REMOVAL AND INSTALLATION
Removal STARTER COMPONENTS FOR REMOVAL AND INSTALLATION Starter Components For Removal And Installation REMOVAL OF STARTER 1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY CAUTION: Work must be started
More informationExhaust System - 2.2L Diesel
Page 1 of 9 Published: Mar 8, 2007 Exhaust System - 2.2L Diesel COMPONENT LOCATION - WITH DIESEL PARTICULATE FILTER Item Part Number Description 1 Exhaust manifold (ref only) 2 Pressure differential sensor
More informationPERFORMANCE AND EMISSION ANALYSIS OF DIESEL ENGINE BY INJECTING DIETHYL ETHER WITH AND WITHOUT EGR USING DPF
PERFORMANCE AND EMISSION ANALYSIS OF DIESEL ENGINE BY INJECTING DIETHYL ETHER WITH AND WITHOUT EGR USING DPF PROJECT REFERENCE NO. : 37S1036 COLLEGE BRANCH GUIDES : KS INSTITUTE OF TECHNOLOGY, BANGALORE
More informationMINIMUM DRIVE PULSE (MDP) LEARNING
23 MINIMUM DRIVE PULSE (MDP) LEARNING When the pulse value that the injector starts injection is measured, it is called mininum drive pulse (MDP). Through MDP controls, can correct pilot injections effectively.
More informationHighly transient gas engine operation from a turbocharging perspective
HERVÉ MARTIN, ABB TURBO SYSTEMS LTD Highly transient gas engine operation from a turbocharging perspective 10th CIMAC CASCADES, Kobe, 12 th October 2018 Overview Introduction Basics of load pick-up Modeling
More informationAlternative fuels and abatement technology for future shipping an overview
MARITIME Alternative fuels and abatement technology for future shipping an overview BMU-Conf. Blue Sky over the Sea, Berlin Torsten Mundt 17. November 2016 1 SAFER, SMARTER, GREENER Agenda DNV GL, the
More informationCONSEIL INTERNATIONAL DES MACHINES A COMBUSTION INTERNATIONAL COUNCIL ON COMBUSTION ENGINES
CONSEIL INTERNATIONAL DES MACHINES A COMBUSTION INTERNATIONAL COUNCIL ON COMBUSTION ENGINES PAPER NO.: 253 Experimental Experience Gained with a Long-Stroke Medium-Speed Diesel Research engine using Two
More informationWärtsilä Auxpac PRODUCT GUIDE
Wärtsilä Auxpac PRODUCT GUIDE Copyright by WÄRTSILÄ FINLAND OY All rights reserved. No part of this booklet may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying,
More informationNote: The engine may start, but you may still have high leakoff within the high-pressure fuel system. NOTICE
Introduction There have been isolated occurrences of excessive fuel leakage past the electronic unit injectors on some engines. Accelerated wear on the delivery valve results in an increased leak rate.
More informationEvaporative Emissions
Page 1 of 6 Published : Apr 8, 2005 Evaporative Emissions 4.4L V8 Evaporative Emissions Component Layout Item Part Number 1 - Fuel filler head 2 - DMTL pump filter (NAS only) 3 - Fuel tank vent hose to
More informationDependence of particle size distribution on injection pressure
FV/SLE Khatchikian 711/ 811-24923 711/ 811-1686 11.11.2 Blatt 1 von 5 Dependence of particle size distribution on injection pressure Summary The influence of the injection pressure on the particle size
More information1. ENGINE ECU AND OTHER COMPONENTS
09-3 EGINE CONTROL SYSTEM 1. ENGINE ECU AND OTHER COMPONENTS ECU/Barometric Sensor Camshaft Position Sensor HFM Sensor / Intake Air Temperature Sensor Fuel Filter (Water Sensor) Preheating Relay Accelerator
More informationUNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE Manufacturer: Engine Family: Certificate Number: AB VOLVO
More informationEmissions and Fuel Consumption Trade-offs of a Turbocharged Diesel Engine Equipped with Electrically Heated Catalyst
Emissions and Fuel Consumption Trade-offs of a Turbocharged Diesel Engine Equipped with Electrically Heated Catalyst 2012 CLEERS Wen Wang 1, Jon Brown 1, Dominik Artukovic 2, Enrico Pautasso 3, and Emanuele
More informationAlfa Laval Slide 4.
Marine & Diesel Joakim Thölin Segment manager Marine & Diesel Equipment Focus on customer segments Orders received January September 2011, Pro-forma PTD Parts & Service Industrial Equipment OEM Process
More informationTechnical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance
Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L IDI (Mercury MerCruiser D4.2L Model) IMPORTANT: To comply with regulations
More informationFoundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...
Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...
More informationCombustion process Emission cleaning Fuel distribution Glow plugs Injectors Low and high pressure pumps
Page 1 of 16 S60 (-09), 2004, D5244T, M56, L.H.D, YV1RS799242356771, 356771 22/1/2014 PRINT Combustion process Emission cleaning Fuel distribution Glow plugs Injectors Low and high pressure pumps Fuel
More informationNZQA Expiring unit standard 3400 version 4 Page 1 of 6. Check a four stroke petrol engine for condition using hand held test equipment
Page 1 of 6 Title Check a four stroke petrol engine for condition using hand held test equipment Level 3 Credits 4 Purpose This unit standard is for people in the automotive repair industry. People credited
More informationHighly efficient SCR Solution for Large Engine Application by modular System Set-up - universal and cost efficient
Highly efficient SCR Solution for Large Engine Application by modular System Set-up - universal and cost efficient Klaus Müller-Haas Rolf Brück Andreas Scheeder EMITEC Gesellschaft für Emissionstechnologie
More informationField experience with considerably reduced NOx and Smoke Emissions
Field experience with considerably reduced NOx and Smoke Emissions Author: Horst W. Koehler, MAN B&W Diesel More than 95 % of the world s trade goes by sea and there are approximately 86,000 ocean going
More informationTechnical File D3*GL*E3
Technical File D3*GL*E3 According to Revised MARPOL Annex VI and NOx Technical Code 2008 Manufacturer: Engine Family: GL family approval no. Engine Type: AB Volvo Penta D3 14252-10 HH D3-200I-D, D3-200A-D
More informationNine months experience with LSF in ECA/SECA Zones
page 1 Nine months experience with LSF in ECA/SECA Zones Niels Bjørn Mortensen 06.10.15 Maersk Maritime Technology page 2 Agenda 1. Why is Maersk interested in SOx emission regulations? 2. What are the
More informationENGINE GENERAL ENGINE GENERAL GENERAL OVERVIEW AND OPERATION PROCESS 1. STRUCTURE...
GENERAL 1. STRUCTURE... 3 OVERVIEW AND OPERATION PROCESS 1. ENGINE CONTROLS COMPONENTS... 2. INTAKE SYSTEM COMPONENTS... 3. EXHAUST SYSTEM COMPONENTS... 4. LUBRICATION SYSTEM COMPONENTS... 5. COOLING SYSTEM
More informationVACUUM MODULATOR COMPOSITION. Layout. EGR valve. Turbocharger actuator. Vacuum pump hose Vacuum pump. Turbocharger vacuum modulator
42 04 VACUUM MODULATOR COMPOSITION Layout Turbocharger actuator EGR valve Vacuum pump hose Vacuum pump Turbocharger vacuum modulator EGR vacuum modulator Vacuum Modulator for VGT Turbocharger Actuator
More information9 th Diesel Engine Emission Reduction Conference Newport, Rhode Island, August 2003
9 th Diesel Engine Emission Reduction Conference Newport, Rhode Island, 24. 28. August 2003 Recent Developments in BMW s Diesel Technology Fritz Steinparzer, BMW Motoren, Austria 1. Introduction The image
More informationPM/ECCM Course Description and Outline
PM/ECCM Course Description and Outline Preventive Maintenance/Essential Care and Condition Monitoring is one of the cornerstones in a world-class reliability process. Condition monitoring will provide
More informationMarine Fuels & Environment
Lloyd s Register: Marine Marine Fuels & Environment Fuel Management on Board Maria Kyratsoudi FOBAS Senior Specialist, Team Leader GEMA Fuel management is all about. Ensuring appropriate storage handling
More information1200 Series 1204F-E44TA Industrial Open Power Unit EU Stage IV, EPA Tier 4 Final kw / hp
Building on its already strong EU Stage IV and EPA Tier 4 industrial range, Perkins is pleased to announce the introduction of the 1204F Industrial Open Power Unit (IOPU). The Perkins four cylinder IOPU
More informationAutomatic Back-Flushing Filter AutoFilt RF9.
Automatic Back-Flushing Filter AutoFilt RF9. AutoFilt RF9 Clearing the Way. The Challenge: In response to the Tier III standard which will come into effect in 2016, the International Maritime Organization
More informationENGINE INTAKE SYSTEM GENERAL 1. ENGINE INTAKE SPECIFICATIONS. 1) Specifications
04-3 GENERAL 1. ENGINE INTAKE SPECIFICATIONS 1) Specifications Element Type Service Interval Dry-Element Type - Initial cleaning: 5,000 km, Clean or change every 10,000 km as required. However, change
More information2 OPERATION 2.1 DDEC BENEFITS FEATURES DDEC SYSTEM--HOW IT WORKS DDEC RELATED PUBLICATIONS...
2 OPERATION Section Page 2.1 DDEC BENEFITS... 2-3 2.2 FEATURES... 2-4 2.3 DDEC SYSTEM--HOW IT WORKS... 2-5 2.4 DDEC RELATED PUBLICATIONS... 2-23 (Rev. 2/03) All information subject to change without notice.
More informationL.A. Maritime describes the operation of Aquametro Fuel-Switching Devices
L.A. Maritime describes the operation of Aquametro Fuel-Switching Devices L.A. Maritime is pleased to announce a new cooperation with Aquametro AG of Switzerland. As of September 1, 2015, L.A. Maritime
More informationParticle Sensor Performance & Durability for OBD Applications & Beyond
Particle Sensor Performance & Durability for OBD Applications & Beyond Imad Khalek & Vinay Premnath, SwRI June 30, 2015 19 th ETH Conference on Combustion Generated Nanoparticles, Zurich, Switzerland Southwest
More informationD ISM Lubricant Performance Test. Report Packet Version No. Method. Conducted For:
D 7468 - ISM Lubricant Performance Test Report Packet Version No. Method Conducted For: V = I = N = Valid; The reference oil / non-reference oil was evaluated in accordance with the test procedure. Invalid;
More informationApplication Note Original Instructions Development of Gas Fuel Control Systems for Dry Low NOx (DLN) Aero-Derivative Gas Turbines
Application Note 83404 Original Instructions Development of Gas Fuel Control Systems for Dry Low NOx (DLN) Aero-Derivative Gas Turbines Woodward reserves the right to update any portion of this publication
More informationGasoline Direct Injection
INTRODUCTION In recent years, legislative and market requirements have driven the need to reduce fuel consumption while meeting increasingly stringent exhaust emissions. This trend has dictated increasing
More informationNatural Gas in High Horsepower Engine Applications
The global leader in natural gas engines. Our products work here to keep this clear. Natural Gas in High Horsepower Engine Applications Westport Innovations Dale Goudie, PEng Overview Introduction to Westport
More informationDieselBlend LPG. a Westport Fuel Systems company
a Westport Fuel Systems company DieselBlend LPG Prins Autogassystemen B.V., specialized in alternative fuel systems, developed a new dual-fuel system for heavy-duty applications: Prins Dieselblend LPG
More informationError codes Diagnostic plug Read-out Reset Signal Error codes
Error codes Diagnostic plug Diagnostic plug: 1 = Datalink LED tester (FEN) 3 = activation error codes (TEN) 4 = positive battery terminal (+B) 5 = ground Read-out -Connect LED tester to positive battery
More informationEMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) H4SO
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) H4SO SYSTEM OVERVIEW 1. System Overview There are three emission control systems, which are as follows: Crankcase emission control system Exhaust emission
More informationMercury Diesel 6.7 L. L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications
Mercury Diesel 6.7 L L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications General Specifications Mercury Diesel 6.7 L L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications
More informationEGR System, Design and Function. This information covers design and function of the Exhaust Gas Recirculation (EGR) system on a Volvo D16F engine.
Volvo Trucks North America Greensboro, NC USA DService Bulletin Trucks Date Group No. Page 12.2006 254 59 1(6) EGR System Design and Function D16F EGR System, Design and Function W2005836 This information
More informationCIMAC NMA Norway 27 January 2010
CIMAC NMA Norway 27 January 2010 Ole Skeltved Head of the Marine Installation Department Marine Low Speed, Engineering < 1 > System solutions for reduction of exhaust gas emissions Agenda : NOx limitations
More information产品技术规范. Product Name: Product Technical Specification SMARTSTONE. No.: CPFL0002 Version: A Issued date: Page 1 of 16
Product Name: TMAP Part Number: CPF00002 Drawing Number: CPFJ0002 Page 1 of 16 CONTENTS 1. General Data 1.1. Description 1.2. Installation Guide 1.3. Maximum ratings of pressure sensor 1.4. Operating characteristics
More informationWärtsilä 20 PRODUCT GUIDE
Wärtsilä PRODUCT GUIDE Copyright by WÄRTSILÄ FINLAND OY All rights reserved. No part of this booklet may be reproduced or copied in any form or by any means (electronic, mechanical, graphic, photocopying,
More informationCommon Rail Design and maturity
Bookmarks Common Rail Design and maturity TP_CommonRail.indd 1 24.08.2010 9:20:01 Uhr Introduction MAN Diesel & Turbo is the world s leading designer and manufacturer of low and medium speed engines engines
More informationEMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) H6DO
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) H6DO SYSTEM OVERVIEW 1. System Overview There are three emission control systems, which are as follows: Crankcase emission control system Exhaust emission
More informationCANDO Diagnostic List Cummins_v8.27
CANDO Diagnostic List Cummins_v8.27 Remark: 1. : means that the system has this function 2. - : means that the system does not have this function 3.compared with the last version, the new added function
More informationMAN Diesel & Turbo SE Exhaust gas emissions & solutions
MAN Diesel & Turbo SE Exhaust gas emissions & solutions Marcel Lodder Upgrade & Retrofit PrimeServ Augsburg MAN Diesel & Turbo SE Exhaust gas emissions & solutions MAN Diesel & Turbo 20.06.2011 < 1 > Agenda
More information1501 Industrial Way N., Toms River, NJ Fax: PACKING LIST
1/6/04 1501 Industrial Way N., Toms River, NJ 08755 732-349-2109 Fax:732-244-0867 MODERATE - Installation requires metric tools and possibly cutting and drilling. The ability to closely follow instructions
More informationECO optimization with NOx equipment
Greener Shipping Summit Athens Greece, 14 th November 2017 ECO optimization with NOx equipment Michael Jeppesen Promotion Manager Promotion & Sales, Two Stroke < 1 > Agenda 1 Influencers of emission compliance
More informationMARITIME GLOBAL SULPHUR CAP. Know the different choices and challenges for on-time compliance SAFER, SMARTER, GREENER
MARITIME GLOBAL SULPHUR CAP 2020 Know the different choices and challenges for on-time compliance SAFER, SMARTER, GREENER Global sulphur cap 2020 DNV GL 3 INTRODUCTION The global 0.5% sulphur cap will
More information1. MAJOR COMPONENTS IN ENGINE AND ENGINE COMPARTMENT
01-3 1. MAJOR COMPONENTS IN ENGINE AND ENGINE COMPARTMENT The electronically controlled advanced D20DT engine that has high pressure fuel system has been introduced to this vehicle. It satisfies the strict
More informationFlash Point Process Analyzer
Norms and standards ASTM D 56 ASTM D 93; DIN EN ISO 2719; IP 34 DIN EN ISO 13736; IP170 DIN 51755 Application The BARTEC BENKE Flash Point Process Analyzer (FPA-4) is a continuously measuring analyzer,
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationENGINE 3S GTE ENGINE DESCRIPTION ENGINE 3S GTE ENGINE
39 ENGINE 3S GTE ENGINE DESCRIPTION The new MR2 has the 2.0 liter, 16 valve, DOHC 3S GTE engine with turbocharger which is used in the Celica All Trac/4WD models and has been well received. The 3S GTE
More informationULSFO (0.10) and RM (VLSFO) Category Potential future trends
ULSFO (0.10) and RM (VLSFO) Category Potential future trends Douglas Raitt Regional Marine Consultancy Manager Working together for a safer world Revised MARPOL Annex VI - Methods for compliance SOx NOx
More informationMANN+HUMMEL ProVent. Oil separator for closed and open crankcase ventilation
MANN+HUMMEL ProVent Oil separator for closed and open crankcase ventilation ProVent high performance with distinct advantages The development of the whole MANN+HUMMEL ProVent product family was directed
More informationKAWASAKI Environment-friendly New engine technology
Norway-Japan Maritime Green Innovation Seminar 4th June, 2015 KAWASAKI Environment-friendly New engine technology 0 Yosuke NONAKA Diesel Engine Dep t. Machinery Div. Kawasaki Heavy Industries, Ltd. F4C-04-0035
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BQ BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationEMS & OBD Engine Testing and Instrumentation 1
EMS & OBD Engine Management System (EMS) It consists of ECU, various sensors and actuators in the engine. It uses the information acquired from sensors to control the fuel injection, ignition systems,
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS SERIE BV BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps.
More informationTechnical Data Series 1206E-E70TTA. Industrial Open Power Unit (IOPU) Performance. Basic technical data
Technical Data 1200 Series 1206E-E70TTA Industrial Open Power Unit (IOPU) 151 kw @ Basic technical data Number of cylinders.....................................................6 Cylinder arrangement...................................
More informationEmerging Environmental Rules & ECA Compliance
Emerging Environmental Rules & ECA Compliance JOC Container Trade Europe Conference Hamburg, 23-24 September 2015 Per Holmvang Program Director Environmental Technologies DNVGL Maritime Technology and
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES
BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationEurope's approach to tackling shipping emissions The Mediterranean and beyond
Europe's approach to tackling shipping emissions The Mediterranean and beyond Robin Meech Marine and Energy Consulting Limited Athens 11 May 2007 Athens 11 may 2007 1 Not if, but when will the Mediterranean
More informationEMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) H4DOTC
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) H4DOTC SYSTEM OVERVIEW 1. System Overview There are three emission control systems, which are as follows: Crankcase emission control system Exhaust emission
More informationHeater capacity 250W 13.5V Injector System pressure 1800 bar High pressure fuel pump. Normal operating temperature. Operating temperature
221001 033 1. SPECIFICATIONS Description Fuel Specification Diesel Fuel filter Type Fuel heater + priming pump + water separator integrated type Filter type Changeable filter element type Change interval
More information