MAGNETIC WORKHOLDING for GRINDING. Electro-Permanent magnetic chucks
|
|
- Gregory French
- 5 years ago
- Views:
Transcription
1 MGNETI WORKHOLDING for GRINDING Electro-Permanent magnetic chucks
2 ELETRO-PERMNENT MGNETI HUKS RILLON MGNETIS, inventor of Electro-Permanent technology, provides a range of powerful, reliable and waterproof Electro-Permanent magnetic chucks for all surface grinding applications. The Electro-Permanent technology consists in changing the magnetic state of the chuck by means of short electric pulses. Once the pulses completed the magnetic chuck keeps its new state, magnetized or demagnetized, even in case of power supply failure. The advantages of Electro-Permanent technology are unquestionable : - SFETY : The holding force is maintained even in case of power supply failure. - PREISION : Without heating, the magnetic chuck keeps its geometry. - EOLOGIL : No continuous energy consumption. WORKPIEE MGNET OILS EPEGRIP Electro-Permanent magnetic chuck for clamping of medium thick to thick elements. Workpiece type Minimum thickness 8 mm * Pole pitch 15mm + 6mm onstruction Steel+resin, without top plate Surface wear 5 mm ccessories End stops in both directions Options rass separators, through-going holes 1. Non magnetized The magnets are not polarized 2. Magnetization Energizing the coils creates the magnetic field 3. Magnetized The magnetic field is maintained by the magnets UNIPERM FULL DEMGNETIZTION ll RILLON MGNETIS Electro-Permanent chucks integrate the full demagnetization concept. During demagnetization cycle, the lnico magnets are completely demagnetized due to a series of decreasing electric impluses according to the know how of RILLON MGNETIS. The full demagnetization permits to reach the lowest possible residual magnetism level in the workpiece, including the workpieces made of high-alloy steel. Universal Electro-Permanent magnetic chuck for clamping of thin elements. Workpiece type Minimum thickness 4 mm * Pole pitch mm onstruction Steel and brass, with top plate Surface wear 6 mm ccessories End stops in both directions PPLITIONS The choice of magnetic chuck is determined by the size of the workpiece as well as the type of grinding to be realized. Rough Finishing High quality finishing Operations EPEFINE² UNIPERM EPEGRIP EPEFINE² Universal Electro-Permanent magnetic chuck with extra thin pole pitch, can be used for EDM applications. Ideal for clamping of very thin elements. Workpiece type Minimum thickness 2 mm * Pole pitch 4 mm + 1 mm onstruction Steel and brass, with top plate Surface wear 6 mm ccessories End stops in both directions Options Through-going holes Small / Thin Large / thick Workpiece size * The indicated thickness permits to reach the optimal utilization conditions. Nevertheless thinner workpieces can also be machined.
3 FETURES ND SIZES = 91 ontrol unit V UR10 UR20 UR30 UR40 Weight of magnetic chucks (Kg) = 95 ontrol unit V Weight of magnetic chucks (Kg) UR10 UR = 68 ontrol unit V UR UR UR UR40 Weight of magnetic chucks (Kg)
4 ONTROL UNITS RILLON MGNETIS control units permit to control all Electro-Permanent magnetic chucks. Resulting from many years of research and experience, they permit to exploit the advantages of Electro-Permanent technology with recognized reliability. DJUSTLE MGNETIZTION Equiped with the newest, microprocessor based remote control T10, the control unit permits to adjust the holding force of the magnetic chuck with a 20 steps resolution. FULL DEMGNETIZTION The demagnetization cycles are optimized for each type of chuck. It is also possible to customize the cycle on request by means of Machine s PL Power supply D9-RS232 connector. MULTIPLE HUKS RILLON MGNETIS control units can control several Electro-Permanent magnetic chucks at the same time. For instance, one control unit UR-80 can control up to 8 magnetic chucks. SPEIFITIONS Power supply voltages On request voltages Mains frequencies Remote control cable Housing material Protection index V 460 V 50 / 60 Hz 3m Steel IP66 E D ØF PENDULR ONTROL UNIT It is also possible to control the magnetic chucks in a pendular way by magnetizing or demagnetizing two groups of chucks. separately. For instance, one control unit UR-40P will permit to separately control 2 groups of 4 magnetic chucks each. Type Nbre of chucks WITH STEEL HOUSING ON RKET D E ØF Weight D E ØF Weight (mm) (mm) (mm) (mm) (mm) (mm) (Kg) (mm) (mm) (mm) (mm) (mm) (mm) (Kg) UR UR UR UR UR MHINE INTERFE ll RILLON MGNETIS control units include an interface permitting to pilot and to control the magnetic chucks from the machine s PL. The safety information contact is available to control the correct operation of magnetic system. UR UR UR UR10P UR20P UR30P UR40P ZI LPESPE P MONTMELIN edex - FRNE info@braillon.com Phone Fax
5 RILLON MGNETIS provide s a wide range of ontrol Units for both Electro-Permanent (EP) and Electro-Magnetic (EM) chucks. SFETY INTERLOKING n interlock ouput is available for machine's PL. This signal means that a good magnetization level has been reached. In the other way, machine's PL can enable or disable the control unit through a dedicated input. VRILE MGNETI FORE Thanks to an analog input, RILLON MGNETIS ontrol Units are able to set magnetic force from null to full power with an infinite number of steps. REMNENE REMOVING true demagnetization cycle is available in order to reach an extra low level of magnetism within the workpiece. This feature is available for both Full Demagnetization Electro-Permanent (EP) and Electro-Magnetic (EM) chucks. Magnetic huck 1 Remote pendant ontrol Unit Mains input Interlocking MULTI-HUKS MONITORING One RILLON MGNETIS ontrol Unit can magnetize and demagnetize several magnetic chucks. Different operating modes are available on request : pendulum, "all in a row" or multi zones chuck control. Magnetic huck 2 Example with a two channels control unit * Other Voltages on request
6 PENDULR ONTROL This option let the operator control two chucks independently. SPEIL VOLTGES On request, from 200 to 480 V. EMEDDED MP-METER and VOLT-METER This equipments show in real time the amperage and voltage supplied to the magnetic chuck. oth are located on the front side of the control unit. RDIO REMOTE ONTROL This option makes the remote pendant wireless. FOOTSWITH REMOTE ONTROL This makes the control unit hands free. QM EUROMP INTERFE This provides standardized signals for Quick Mould hange pplications. OOLING SYSTEM vailable for warm environments. TROPILIZTION vailable for extremely wet environments. * Note : "P" means Pendular
MAGNETIC WORKHOLDING WORKHOLDING WITH PRECISION AND PERFORMANCE. AMTC BV (+31)
MGNETIC WORKHOLDING WORKHOLDING WITH PRECISION ND PERFORMNCE PERM CHPTER OVERVIEW CHPTER 1 Page 17-32 SV-RT.-No. POLE PITCH COMMENTS MCHINING OPERTION* PGE Permanent Magnetic Chucks 220.30 1,9 mm magnet
More informationCarbon Content Flats Magnet Strength Carbon Content Surface Condition (Air Gap) Rounds Magnet Strength Users Guide
M-2310 Lift Magnet onsiderations Eriez SafeHold Permanent Lift Magnets are ideal for carrying semi-finished products such as machined parts, castings, press molds, steel plates, bars, tubes and more. These
More informationMAGNETIC WORKHOLDING. Grinding Pallet Milling EDM Turning Lifting BRC-06-EN
MAGNETIC WORKHOLDING Grinding Pallet Milling EDM Turning Lifting Permanent Electro Electro-permanent BRC-0-EN Magnetic Workholding Applications Table of contents Grinding EMA ---------------------------------------------------
More informationTransport with Magnets
Wagner Magnete GmbH & Co. KG Obere Straße 15 D-87751 Heimertingen Phone: +49 (0) 8335 980-0 Fax: +49 (0) 8335 980-270 www.wagner-magnete.de e-mail: info@wagner-magnete.de Technology Full of Attraction
More informationFigure 1 Linear Output Hall Effect Transducer (LOHET TM )
PDFINFO p a g e - 0 8 4 INTRODUCTION The SS9 Series Linear Output Hall Effect Transducer (LOHET TM ) provides mechanical and electrical designers with significant position and current sensing capabilities.
More informationFXE Electro-Permanent Lifting Magnets. FXE-300/50 FXE-500/50 Electro-Permanent Lifting Magnets
Magnetic Magnetisches LiftingHeben FXE Electro-Permanent Lifting Magnets FXE Lifting magnets are the professional solution for the frequent turning of workpieces. They are very robustly built and designed
More informationMotor Control. Contactors C 25 D N A 2 15 A A CATALOG SELECTION. Definite Purpose Contactors Catalog Numbering System. Contactors
Selection ompact Definite Purpose Motor ontrol TLOG SELETION Definite Purpose ing System 2 D N 2 Model = ontactor = Three-Phase Starter = Single-Phase Starter Type 2 = Non-Reversing 27 = Non-Reversing
More informationSMART-B SERIES Microprocessor Controlled Chuck Control
OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS WITH INSTALLATION, TROUBLESHOOTING, INSPECTION AND MAINTENANCE INSTRUCTIONS SMART-B SERIES Microprocessor Controlled Chuck Control O.S. WALKER Rockdale Street,
More informationMODEL FR20 & OLV-20 MAGNETIC FLOAT LEVEL SENSOR
MODEL FR20 & OL-20 MGNETI FLOT LEEL ENOR Operational Description These level sensors contain hermetically sealed reed switches in the stem and a permanent magnet in the float. s a float rises or falls
More informationSOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
More informationDC2-Wire Cylindrical Long-Distance No-Polarity Proximity Switches
D-Wire ylindrical Long-Distance No-Polarity Proximity Switches FL7M Series Rigid structure reduces damage from collision with workpiece. Long sensing distance (M: mm, M: mm, M: 5 mm) D -wire switch with
More information4.2. Definite Purpose Contactors and Starters. Contents A, Two-, Three- and Four-Pole C25. Contactors
.2 Definite Purpose and Starters 5 360, Two-, Three- and Four-Pole 25 5 360, Two-, Three- and Four-Pole 25 Product Description Eaton offers the most comprehensive line of definite purpose contactors in
More informationJune 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]
7-2 Lighting ontactors Open ontrol June 2005 N5 lectrically Held Vol. 2, Ref. No. [09] ontents eatures Instructional Leaflets 7 escription Page lectrically Held Product escription....... 7-2 pplication
More informationF-Series General Specifications
arling F-Series General Specifications F-Series breakers are available up to 700, and are also available with a 25 millivolt metering shunt construction. This optional construction provides a safe method
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationlifting magnets complete line
lifting magnets complete line Lift, move or position regardless of size, weight or shape in fewer man hours reliably and economically. Lifting magnets make quick work of difficult, time-consuming steel
More informationContent. Page 4 7. Technical Information Electrical. Models and Applications Technical Information Potentials for energy savings
Content Technical Information Electrical Page 4 7 Models and pplications Technical Information Potentials for energy savings 8 0 High Pressure Pumps BFS, FFS / 50 Hz BFS2, FFS2 / 50 Hz High Pressure Pumps
More informationSelection Information Molded Case Circuit Breakers
Selection Information Molded ase ircuit reakers lass 500, 600, 800 100 rame 100 -rame IRUIT RKRS 3 ircuit reaker Type (240 V) H Hb H I Y Number of 1, 2, 3 1 2, 3 1 1 2, 3 2, 3 1 urrent Range 15 100 15
More informationStandard Products Catalog
Standard Products atalog Induction Permanent Magnet D rushless D Parallel Gearmotors Motors ontrols Upgraded 3-Phase Models! pages 8 bodine-electric.com S-17a D 4 3 4 14.0/11.0 2.378 SQ MX 3 5.522 MX.554
More informationcontrol systems Made in Italy Integrated systems for the web tension regulation
control systems Integrated systems for the web tension regulation We know that producing quality laminates require very high web tension control. For this reason we provide a very wide range of integrated
More informationThe hand controlled. years warranty. N 1 in the world. magnetic lifter. Safety Through Power
The hand controlled magnetic lifter N 1 in the world International Patent years warranty Safety Through Power Hand controlled magnetic lifters A wide Choice of Quality MaxX 125 MaxX 250 MaxX 500 MaxX 1000
More informationMachine Tool Tank Units
www.gusher.com Quality Under Pressure Machine Tool Tank Units For General, High Pressure and ustom Industrial oolant Solutions Ruthman...nother Word for Innovation Gusher Tank Units Economy T-VV SERIES
More informationLECTURE 27 SERVO VALVES FREQUENTLY ASKED QUESTIONS
LECTURE 27 SERVO VALVES FREQUENTLY ASKED QUESTIONS 1. Define a servo valve Servo valve is a programmable orifice. Servo valve is an automatic device for controlling large amount of power by means of very
More informationContents. Valve Assembly Series: Multi-Valve Manifolds. Diesel Priming Systems FP-301: DC Fuel Priming System Diesel Hand Priming Pump
Diesel Fuel leaning Diesel Fuel Transfer Oil hange Systems ontents Pumps GP-201: D Gear Pump GP-201: D Gear Pump with Smart Sensor GP-311: D Gear Pump GP-312: D Gear Pump GP-301: Gear Pump GP-602: Gear
More informationAir Valve AIR-PILOTED VALVES
K-UV002 Ver.1.0 ir Valve I-ILOTED VLVES INSTUCTI MNUL Ver.1.0 ir-piloted Valves Features Since the unit requires air piping only, with no need for electrical wiring, it can be handled by a person without
More informationSc h rader Bellows. CS Series Air Control Valves. 2 & 3-Way, Inline, Manifold & Stacking Direct Acting Solenoid Valves
Sc h rader Bellows 2 & 3-Way, Inline, Manifold & Stacking Direct cting Solenoid Valves INDEX PGE Features Inline Valves... 3 Stacking Valves... 4 Manifold Valves... 5 Valve Model Number System... 6 Solenoid
More informationGTEC Transfer switch Open transition
GTE Transfer switch Open transition 40-2000 amp Description GTE transfer switches combine reliability and flexibility in a small, economical package for transferring loads between a utility and a generator
More informationConnecting Brushless DC Motors to Electronic Controllers
onnecting rushless D Motors to Electronic ontrollers uthored y: Mike Tetmeyer and Engineering Team Members Pittman Motors www.pittman-motors.com onnecting rushless D Motors to Electronic ontrollers onnecting
More informationDRILL CHUCKS-KEY TYPE
HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all
More informationM7410E SMALL MODULATING LINEAR VALVE ACTUATOR
100%..0% 0%..100% 0..10V 2..10V M7410E SMLL MODULTING LINER VLVE TUTOR PRODUT DT PPLITION The Honeywell M7410E actuator is specifically designed to provide modulating control together with the V5822/23,
More informationQO and QOU Miniature Circuit Breakers QO Circuit Breaker Accessories
QO and Miniature ircuit reakers QO ircuit reaker ccessories lass 1130 / Refer to atalog 0730T9801 IRUIT RKRS ccessories for Use with QO and QO Miniature ircuit reakers Handle ttachments escription at.
More informationSELECTION. Easily Selectable Easily Serviceable. Interchangeability as easy as 1-2-3
SELETION Terminal Unit Zone Valve 1 Select your valve body Female Thread Solder ouble Union 2 Select your cartridge type hoice of V Hot and hilled Water 50% Glycol Low Pressure Steam Pressure alanced Male
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More informationWORKHOLDING. Collet Blocks TURNING MILLING GRINDING WORKHOLDING ROTARY.
WORKHOLDING ollet Blocks TURNING MILLING GRINDING WORKHOLDING ROTRY www.hardinge.com Part Setup Reduction Hardinge has several options for holding single or multiple parts on your machine table, in trunnions
More informationVariable speed drives
5 192 Variable speed drives SED2 Variable speed drives for speed control of three-phase a.c. motors actuating fans or pumps. Range: 0.75 kw to 90 kw for IP20/21 version, 1.1 kw to 90 kw for IP54 version.
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More information201 SW 20th Street Fort Lauderdale, Fl Ph: (954) Fax: (954)
Diesel Fuel leaning Diesel Fuel Transfer Oil hange Systems 201 SW 20th Street Ph: (954) 522-0882 Fax: (954) 522-0456 ontents Pumps GP-201: D Gear Pump GP-201: D Gear Pump with Smart Sensor GP-311: D Gear
More informationELECTRIC CYLINDER SERIES ELEKTRO ROUND DC
ELECTRIC CYLINDER SERIES ELEKTRO ROUND DC In the ELEKTRO ROUND DC cylinder, the forward movement of the piston rod is obtained via an acme screw and a self-lubricating technopolymer nut. This piston has
More informationSeamless Integration of PHD Grippers to Universal Robots
Seamless Integration of PH Grippers to Universal Robots PNEUON02 ENEFITS n Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots n Incorporated M valves n ouples
More informationKulka Military Class (A-A-59125) / (MIL-T-55164*)
(--59125) / (MIL-T-55164*) Military Class: Closed ack Supercedes MIL-T-59125 These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting
More informationand Refrigeration Institute). CNX Special Purpose Contactors
Series C7 Special Use Contactors Contactors designed and labeled for specific industrial applications Special Use Contactors Hydraulic elevator duty contactors HVC rated contactors Lighting contactors
More informationCUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, thyristor rated, partial
More informationSheet Steel Emergency Light Fitting Series 6018
> For an operating duration of 1.5 or 3 h > Operating modes Continuous operation Continuous operation with switchable emergency light blocking > Weekly functional test > Total discharge protection and
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationLevel Switches. Level Float Switch. Visual/Electrical Low Level. LEN Series RL Series. LV/E1 Series. S e c t i o n
Level Switches Level Float Switch LEN Series RL Series Visual/Electrical Low Level LV/E1 Series S e c t i o n 5 Level Float Switch - LEN Series The electromagnetic level indicator activates an electric
More informationCreating Linear Motion One Step at a Time
Creating Linear Motion One Step at a Time In classic mechanical engineering, linear systems are typically designed using conventional mechanical components to convert rotary into linear motion. Converting
More informationTECHNICAL GUIDE MODELS: MV MODULAR VARIABLE SPEED AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING & HEAT PUMP DESCRIPTION FEATURES
TEHNIL GUIDE MODELS: MV MODULR VRIBLE SPEED IR HNDLERS FOR USE WITH SPLIT SYSTEM OOLING & HET PUMP 1200-2000 FM BLOWERS 3-5 TON OILS OPTIONL 1 & 3 ELETRI HETERS Due to continuous product improvement, specifications
More informationDefinite Purpose Contactors
1 & 2 Pole - Series CDP2 One and Two Pole with C Coil (Open type only) ➍ mps Poles Locked Rotor mps mps ➋ Maximum H.P. 240V ➋ 480V 600V 120V 240V ➋ 30 ➊ 1 ➏ 150 75 50 40 1 2 CDP2-1P30- ➎ 69.54 50 30 ➊
More informationA200 NEMA Contactors and Starters A200
Starters Non-reversing and Reversing 11 Not to be used for construction purposes unless approved. Table 11. Open Reversing Starters Dimensions NEM of Poles Fig. Mounting Dimensions in Inches (mm) Screws
More informationGeneral + Definite Purpose Contactors
General + Definite Purpose General Information... 2 Horse Power Rating Charts... 4 Contact Life... 8 Contactor Number Structure... Series C8 Miniature and Starters... 3 ccessories... 2 Contactor Cross
More informationThermo Scientific Masterflex I/P
Thermo Scientific Masterflex I/P Standard Process Pump Masterflex I/P Series Standard Process Pump Brushless motor handles challenging applications with minimal maintenance Non-chip epoxy-coated, washdown
More informationProduct Name Model Application
ELECTRO CHUCK CONTROLLERS ELECTRO Product Name Model Application Electromagnetic holder KE-BED RKVM Used for automation of press machines and shearing robots. Permanent electromagnetic holder KEPKE-HA
More informationPERMADUR INDUSTRIES, INC.
PERMADUR INDUSTRIES, INC. MAGNETS WON T DROP LOAD IF POWER FAILS! MADE IN U.S.A. MAGNET SYSTEMS VACUUM SYSTEMS INDIVIDUAL MAGNETS A Family Owned Company with over 40 years of Material Handling experience
More informationElectronic Dynamo Regulator INSTRUCTION MANUAL. COPYRIGHT 2014 CLOVER SYSTEMS All Rights Reserved
DRM TM DRM-HP TM Electronic Dynamo Regulator INSTRUCTION MANUAL COPYRIGHT 2014 CLOVER SYSTEMS All Rights Reserved INTRODUCTION The Clover Systems DRM is a state-of-the art all-electronic voltage and current
More informationThe Complete System Solution! Highest Grade Electronic Components RoHS Compliant.
Advantages of the 72 Alternating Relay The Complete System Solution! Highest Grade Electronic Components RoHS Compliant. The Model 72 series Alternating Relay is designed for duplex pumping systems where
More informationQO and QOU Miniature Circuit Breakers QOU Miniature Circuit Breakers
QO and Miniature ircuit reakers Miniature ircuit reakers lass 720 / Refer to atalog 0730T9801 Low mpere Miniature ircuit reakers unit mount miniature circuit breakers (cable-in/cable-out) are ideal for
More informationSafety cartridge valves with poppet position monitoring
Table EY/E Safety cartridge valves with poppet position monitoring ISO standard, onoff, poppet type, conforming to Machine Directive //EC certified by LIFI*/NC 1 RNE OF VLVE S MODELS LID*/FV Inductive
More informationDC2-Wire Spatter-Guarded Cylindrical Proximity Sensors. Operation mode N.O. N.C. N.O. N.C. N.O. N.C. 10mm
D-Wire Spatter-Guarded ylindrical Proximity Sensors FL7MSeries variety of anti-spatter measures make these sensors the optimum for welding processes on the automotive production line. With Teflon coating
More informationTECHNICAL GUIDE MODELS: MA MODULAR AIR HANDLERS FOR USE WITH SPLIT SYSTEM COOLING & HEAT PUMP DESCRIPTION FEATURES
TEHNIL GUIDE MODELS: MODULR IR HNDLERS FOR USE WITH SPLIT SYSTEM OOLING & HET PUMP 600-2000 FM BLOWERS 2-5 TON OILS OPTIONL 1 & 3φ ELETRI HETERS ISO 9001 ertified Quality Management System Due to continuous
More informationSOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
More informationElectropneumatic Timing Relays Series 7000 Industrial
DESIGN FEATURES Available in On-Delay, True Off-Delay, and On/Off-Delay. Timing from 0.1 seconds to 60 minutes, fully calibrated in linear increments. Oversize time-calibrated adjustment knobs, serrated
More informationEnglish - Español - Français - Deutsch - Italiano
English - Español - Français - Deutsch - Italiano INTRODUCTION Thank you for purchasing Power Probe products. The Power Probe is the best professional electrical tester for reducing diagnostic time in
More informationA 601 A B C. 1. How it works
601 W4 DXN6P25 Variable flow-control 6-way valve, series DXN6_ For 4-pipes climate ceilings with change-over Pressure independent variable flow-control Integrated flow measurement Power supply U v : 24Volt
More informationTORQUE-MOTORS. as Actuators in Intake and Exhaust System. SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz.
TORQUE-MOTORS as Actuators in Intake and Exhaust System SONCEBOZ Rue Rosselet-Challandes 5 CH-2605 Sonceboz Tel.: +41 / 32-488 11 11 Fax: +41 / 32-488 11 00 info@sonceboz.com www.sonceboz.com as Actuators
More information29 160/ Proportional Pressure Relief Valve Model DBE, (Series 5X) Ordering Code DBE 5X Y G24 1/ PSI (350 bar)
Size 10, 25 Proportional Pressure Relief Valve Model DE, (Series 5X)... 5100 PSI (350 bar)... 106 GPM (400 L/min) R 29 160/06.98 R 29 160/06.98 Replaces: 05.94 Operation by means of proportional solenoid
More informationSV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves
SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally
More informationMVSS. Technical features
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or 100-130V 60Hz and 200-240V, 50Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque
More informationCACTUS GRAB TMG. Terex Fuchs 5-tine cactus grab with a capacity of 0.4 to 0.8 m 3 for machines with an operating weight of 16 t to 50 t
TTCHMENTS CCTUS GR TMG Terex Fuchs 5-tine cactus grab with a capacity of 0.4 to 0.8 m 3 for machines with an operating weight of 16 t to 50 t The Terex Fuchs cactus grab was developed specifically for
More informationLinear Position Technology EZ-track
Rugged Rod Style Housings: Transducers designed to survive in harsh industrial environments to reduce downtime on the plant floor. The R10 housing, sensing rod and components are designed and constructed
More informationHeat Exchanger Accessories
TEMPERTURE CONTROL - SERIES 123W May be used directly to control small electric motors etc using SINGLE phase power supply to maximum of 6 amps. lso for low volt (12 or 24) DC power supplies to maximum
More informationEM Series Electro Module
Individual lutch or Brake Module ombine to omprise a lutch, Brake or lutch/brake ombination Electro Modules are individual clutch or brake units which are assembled together to comprise a clutch, brake,
More informationEM 101 EM EM EM GENERAL INFORMATION. SPECIFICATIONS MATERIALS Wetted Materials - FLOW RANGE
EM101 LOW FLOW MAGNETIC FLOW METER INSTRUCTIONS EM 101 LOW-FLOW MAGNETIC FLOW METER INSTRUCTIONS EM 101-025 EM 101-038 EM 101-050 GENERAL INFORMATION The EM101 is a small plastic-bodied electromagnetic
More informationPK Installation Instructions for the 2CPS Series Cable Pull Switch Without Broken Cable Detection ISSUE 3. Sensing and Control
ISSUE 3 Installation Instructions for the 2PS Series able Pull Switch Without roken able Detection PK 80169 WRNING IF USED IN PPLITIONS ONERNING HUMN SFETY Only use N direct opening ( positive opening
More informationChamp MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
More informationIdentifying and Using Stepper Motors
Identifying and Using tepper Motors This brief article is indented to help you to identify the various type of stepper motors and how to connect them to the various interface device that can be found in
More informationLow and High Voltage Power Supplies
Low and High Voltage Power Supplies We work according to ISO 9001: 2008 Since 1994 Fug works according to the quality assurance system ISO 9001. All shipped units are checked and documented in our testing
More informationCUSTOM DC MOTORS & GEARMOTORS
& GEARMOTORS Battery-powered, 24-volt motor with close coupled hydraulic pump mounting on one end and standard NEMA 56 C face and shaft on other end. Totally enclosed fan cooled, SCR rated, partial motor
More informationELD Series - DC Motor Drive
ELD Series - D Motor Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements and long life D electrical powered fans to give extended
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationContinental Hydraulics Installation Manual CEM-AA-A
Continental Hydraulics Installation Manual CEM-AA-A Description: This power amplifier drives either single or dual solenoid proportional valve coils up to 2.6A. It is suitable to control current to proportional
More informationProportional pressure reducing cartridges type LIRCZO normally closed, ISO 7368 sizes from 16 to 40
www.atos.com Table TF/E Proportional pressure reducing cartridges type LIRCZO normally closed, ISO 7 sizes from to connector MODEL CODE FOR COVERS Proportional pressure reducing cartridge valves A = without
More informationElectronic Dynamo Regulator INSTRUCTION MANUAL. COPYRIGHT 2014 CLOVER SYSTEMS All Rights Reserved
DRM TM DRM-HP TM Electronic Dynamo Regulator INSTRUCTION MANUAL COPYRIGHT 2014 CLOVER SYSTEMS All Rights Reserved INTRODUCTION The Clover Systems DRM is a state-of-the art all-electronic voltage and current
More informationDURATAPE TM RGBW IP66 OUTDOOR
Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors can be used together with 3000ºK White LED to create different tone of White or soften
More informationSOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc /4 N U NO / Series 4 FETURES ompact valve intended for single-acting actuator control Epoxy moulded coil for general service applications oils interchangeable without
More informationToyota Tacoma TB TG
INSTLLTION INSTRUTIONS FOR PRT 99-84 KIT FETURES PPLITIONS Toyota Tacoma 005-009 99-84T 99-84TG DIN Head Unit Provision With Pocket ISO DIN Head Unit Provision With Pocket Double DIN Head Unit Provision
More informationPin & Sleeve. Heavy Duty Industrial Wiring Devices for North American and European Markets
Pin & Sleeve Heavy Duty Industrial Wiring Devices for North merican and European Markets Pin & Sleeve SFETY, PERFORMNE ND DURILITY...IN SNP! Extensive Product Family: - Safe and reliable, portable electrical
More informationPARKING LOT CONTROLLER WITH LOGIC & MAIN CONTACTOR
PARKING LOT CONTROLLER WITH LOGIC & MAIN CONTACTOR VPC-AA The VPC-AA Parking Lot Controller is an easily installed device designed for mid-sized parking lot installations. The weather proof design is ideal
More informationActuators are the muscles of robots.
6.1 INTRODUCTION Actuators are the muscles of robots. Several types of actuator noteworthy? Electric motors? Servomotors? Stepper motors? Direct-drive electric motors? Hydraulic actuators? Pneumatic actuators?
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More information6.1. Lighting Contactors. Contents. Application Description. Product Overview. Open Control
.1 - Contents Description C30CN Mechanically and Electrically Held.... CN35 Electrically Held.................... A202 Magnetically Latched................ Page V5-T-3 V5-T-1 V5-T-23 Product Overview C30CN
More informationSTP MAGNETICALLY LEVITATED TURBOMOLECULAR PUMPS SEMICONDUCTOR PUMPS AND EXHAUST MANAGEMENT. STP features
STP MGNETILLY LEVITTED TUROMOLEULR PUMPS dvantage series The new dvantage series of magnetically levitated turbo pumps have been designed to provide the highest levels of throughput required by the next
More informationEM101 LOW FLOW MAGNETIC FLOWMETER INSTRUCTIONS
Spec Tech Industrial 203 Vest Ave. Valley Park, MO 63088 Phone: 888 SPECTECH Email: sales@spectechind.com www.spectechind.com EM101 EM101 LOW FLOW MAGNETIC FLOWMETER INSTRUCTIONS LOW FLOW MAGNETIC FLOWMETER
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationElectronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
More informationProportional pressure relief valve Types DBE(M) and DBE(M)E
RE 29 142/11.02 Replaces: 02.99 Proportional pressure relief valve Types DE(M) and DE(M)E Nominal size 32 1) Series 3X Maximum operating pressure 3 bar Maximum flow 600 L/min H/ 1764 1) NS 10; 25, Series
More informationSERIES ESFX. Electric Linear Actuator Slides with Ball Screw Drive. Series ESFX can be combined to create a multi-axis Cartesian robot system.
SERIES ESFX Electric Linear ctuator Slides with all Screw Drive Series ESFX can be combined to create a multi-axis artesian robot system. 1 SERIES ESFX ELETRI LINER TUTOR SLIDE Easy 3 Step ctuator & Motor
More informationEntmagnetisierungssysteme. Degaussing. For Work Pieces from 1 g to 4000 kg
Entmagnetisierungssysteme Degaussing For Work Pieces from 1 g to 4000 kg 2012 More than four decades of degaussing solutions Vallon GmbH Develops and produces degaussing tools and degaussing systems. Our
More informationCB29M. Multi Position 60 HZ A I R H A N D L E R S. 3 to 5 Tons Optional Electric Heat 5 to 30 kw CB 29 M 41 1 E N G I N E E R I N G D A T A
E N G I N E E R I N G D T I R H N D L E R S CB29M Multi Position 60 HZ Bulletin No. 210478 November 2008 Supersedes July 2007 3 to 5 Tons Optional Electric Heat 5 to 30 kw MODEL NUMBER IDENTIFICTION CB
More information