Single action two way cross block
|
|
- Evelyn Shields
- 5 years ago
- Views:
Transcription
1 Connecting clamps
2 Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail positions with the release of a single bolt or knob. Material: reinforced, screws in stainless steel Example application Adjustment with ratchet handle code 1 Adjustment with bolts Adjustment with knob code CONVEYOR LINE
3 Positive action cross block EXAMPLE APPLICATION Zinc plated steel POSITIVE ACTION CROSS BLOCK Material: reinforced. Use: rod Ø mm. 1 Without screws n 0 POSITIVE ACTION CROSS BLOCK WITH SCREWS Material: reinforced, screws in stainless steel. 131 With screws n 0 POSITIVE ACTION CROSS BLOCK WITH STAR KNOBS Material: reinforced, knobs in with stainless steel insert. Use: rod Ø mm. 132 With star knobs n 0 POSITIVE ACTION CROSS BLOCK WITH KNOBS Material: reinforced, knobs in with zinc plated steel insert. Use: rod Ø mm. 133 With knobs n 0 CONVEYOR LINE 265
4 Quick positioning cross block Ø Ø 50 QUICK RELEASE CROSS BLOCK Material: housing in reinforced, hardware in stainless steel, knobs in with bushings in nickel plated brass. Features: it connects two round rods at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob Ø Ø 50 QUICK RELEASE CROSS BLOCK Material: body in stainless steel, hardware in stainless steel, knobs in with bushings in nickel plated brass. Features: it connects two round rods at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob. with knobs colour Orange Black 13360V 13360VN 13361V 13361VN 13362V 13362VN 13363V 13363VN 13364V 13364VN 13365V 13365VN 266 CONVEYOR LINE
5 Quick positioning cross block Rod not included 8 3 CROSS BLOCK WITH KNOBS Components: Housing in reinforced. Washer and hardware in stainless steel. Knobs in reinforced with one threaded insert in stainless steel and one brass bushing. Features: Connects two round rods or one round rod with square bar at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob. 133V 13311V 13322V 133V Rod not included CROSS BLOCK WITH KNOBS Components: Housing in reinforced. Washer and hardware in stainless steel. Knobs in reinforced with one threaded insert in stainless steel and one brass bushing. Features: Connects one round rod with flat bar at 90. Each side of the cross block can be quickly adjusted by loosening the hand knob V 13261V 13262V 13263V FLAT BAR A x B 25 x 8 25 x 8 25 x 6 25 x 6 CONVEYOR LINE 267
6 Dual action cross block PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing (). - Internal Housing (see the table). - Closing Cap (). - Spring (steel). - Knob ( with threaded insert in stainless steel). - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Rod not included Internal block Nickel plated brass For a correct use of these products and to get the best performance, please call our engineering experts. 268 CONVEYOR LINE
7 Dual action cross block fine positioning version PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing () - Internal Housing (see the table) - Closing Cap () - Spring (steel) - Knob ( with threaded insert in stainless steel). - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Rod not included Internal block 13313FP 133FP 13323FP 133FP Nickel plated brass For a correct use of these products and to get the best performance, please call our engineering experts. CONVEYOR LINE 269
8 Dual action cross block (for flat bar) PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing () - Internal Housing (see the table) - Closing Cap () - Spring (steel) - Knob ( with threaded insert in stainless steel. - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Rod not included Internal block Flat bar A x B Nickel plated brass 25 x 8 25 x 8 25 x 6 25 x 6 25 x 8 25 x 8 25 x 6 25 x 6 For a correct use of these products and to get the best performance, please call our engineering experts. 270 CONVEYOR LINE
9 Dual action cross block fine positioning version (for flat bar) PATENTED DUAL ACTION CROSS BLOCK Features: for fast line changes the new System Plast Dual Action Cross Block provides simplicity and easy in achieving the accuracy needed in adjusting multiple stations simultaneously. By simply rotating the quick release cap, the Dual Action Cross Block is placed in a neutral, non clamping, position. The side guides and other rails can then be moved to the desired location before returning the quick release cap to its locked position. This new patented part is perfect for applications where accurate and / or frequent adjustments are required. Fits - mm diameter adjusting rods. Corrosion resistance composite components. Ergonomic spring loaded design. Components: - External Housing () - Internal Housing (see the table) - Closing Cap () - Spring (steel) - Knob ( with threaded insert in stainless steel - Threaded insert (nickel plated brass). Advantages: Rapid adjustment of guides to accomodate the choice of bottle format. Quick and easy maintenance. Internal block Flat bar A x B 13264FP 13265FP 13266FP 13267FP Nickel plated brass 25 x 8 25 x 8 25 x 6 25 x 6 For a correct use of these products and to get the best performance, please call our engineering experts. CONVEYOR LINE 271
10 Cross blocks CROSS BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: it connects two round or square rods at 90. Material: reinforced with stainless steel bolts. Supply: unassembled n 0 CONNECTING JOINT AND PINS Supply: separate two pins and one connecting joints n CONVEYOR LINE
11 Extra long cross or parallel blocks EXTRA LONG CROSS BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: it connects two round or square rods at 90. Material: reinforced with stainless steel bolts. Internal connecting joint and pins in nickel plated brass P 13652P 13653P 13654P 13655P 13656P 13657P 13658P 13659P 13660P 13661P 13662P 13663P 13664P 13665P n 0 EXTRA LONG PARALLEL BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: it connects two round or square rods at parallel. Material: reinforced with stainless steel bolts. Internal connecting joint and pins in nickel plated brass L 13652L 13653L 13654L 13655L 13656L 13657L 13658L 13659L 13660L 13661L 13662L 13663L 13664L 13665L n 0 CONVEYOR LINE 273
12 T - Clamp (base) T-MOBILE CLAMPS Features: it mounts to the side of equipment to provide support for light duty application. Use: with single cross block Material: reinforced with stainless steel bolts. Supply: unassembled 18 n 0 CROSS BLOCKS Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: reinforced with stainless steel bolts. Supply: unassembled n 0 CONNECTING JOINT AND PINS Supply: separate two pins and one connecting joints n CONVEYOR LINE
13 T - mobile clamp T-MOBILE CLAMPS Features: mounts to side of equipment to provide support light duty rod type guide rail system. Material: reinforced with stainless steel bolts; Internal connecting joints and pins in nickel plated brass. 13P 1311P 13P 1313P 13P n 0 T-MOBILE CLAMPS Features: mounts to side of equipment to provide support light duty rod type guide rail system. Material: reinforced with stainless steel bolts; Internal connecting joints and pins in nickel plated brass. 13L 1311L 13L 1313L 13L n 0 CONVEYOR LINE 275
14 Standard cross blocks Acetal resin CROSS BLOCK Features: cross blocks, in a variety of bore configurations, including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: reinforced with stainless steel fasteners K m m HEAVY DUTY CROSS BLOCK Features: cross blocks, in a variety of bore configurations,including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: acetal resin with stainless steel fasteners. 13S006 13S007 13S008 13S009 13S001 13S00111 Ref. VG-6--M VG-6--M VG-6--M VG-6--M VG-6--M VG-6--M n 276 CONVEYOR LINE
15 Standard cross blocks Acetal resin MINI CROSS BLOCK Features: cross blocks, in a variety of bore configurations,including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: reinforced with stainless steel fasteners M5 PD2 HEAVY DUTY MINI CROSS BLOCK Features: cross blocks, in a variety of bore configurations,including square bore combinations, are manufactured from reinforced. Use: connects two round or square rods at 90. Material: acetal resin with stainless steel fasteners. 13S001 13S001 13S001 Ref. VG-619-M VG-619-M VG-619-M 8 8 n CONVEYOR LINE 277
16 T. Clamp T-CLAMP Features: mounts to side of equipment to provide support for light duty rod type guide rail system. Material: reinforced with stainless steel fasteners Ø DF CLAMP Features: used to hold many types of accessories. Numerous bore sizes available. Material: reinforced with stainless steel fasteners CONVEYOR LINE
17 Reflector clamp REFLECTOR CLAMP Features: used to hold reflectors using a cap screw and nut or pression clip. Material: reinforced with stainless steel fasteners CUP 1.5 TUBE - external d. mm - thickness 1 mm - length 6 m Ø 8 Ø SS 136 n 0 PA-FG CONVEYOR LINE 279
18 Mounting assembly kit Polyethylene REFLECTOR MOUNTING ASSEMBLY KIT (for reflector) Material: clamps in reinforced tightening bolt and connecting tubes in stainless steel, closing caps in polyethylene. Components: nr 1 T-Clamp, nr 1 clamp, nr 1 cross block, nr 2 connecting tubes, nr 4 closing caps. Supply: unassembled. *Packaging: 25 completely kit. 138 n 25* SENSOR MOUNTING ASSEMBLY KIT (for Ø mm sensor) Material: clamps in reinforced tightening bolt and connecting tubes in stainless steel, closing caps in polyethylene. Components: nr 1 T-Clamp, nr 1 clamp, nr 1 cross block, nr 2 connecting tubes, nr 4 closing caps. Supply: unassembled. *Packaging: 25 completely kit. 134 n 25* 280 CONVEYOR LINE
19 Accessory holders S000 UNIVERSAL ACCESSORY HOLDERS Photocells, sensors, spray heads, miniature pneumatics, plus many other accessories can easily be held in place using accessory holders. These multi-axis assemblies are designed to offer unlimited possibilities for mounting accessories on conveyors and machinery of all types. Made of corrosion resistant thermoplastic and stainless steel, accessory holder can withstand harsh operating environments. Accessory holders are configured to mount sensor or reflectors of various dimensions. The components are available as loose parts or as an assembly kit. Material: clamps in reinforced, tubes in stainless steel. S00059 S00056 PATENTED Ref. W H S00050 S00071 S00072 S00053 VG VG VG VG n S00073 S00074 S00051 S00075 VG VG VG VG n S00076 S00077 S00078 S00079 VG VG VG VG n S00080 S00081 S00082 S00083 VG VG VG VG n S00084 S00052 S00085 S00054 VG VG VG VG n ACCESSORY HOLDER Material: clamps in reinforced, tubes in stainless steel. Ref. 8 S00060 S00062 S00059 S00063 S00061 S00065 S00067 S00064 S00068 S00066 VG VG VG VG VG VG VG VG VG VG mm 5 mm n n 25.7 CONVEYOR LINE 281
20 Accessory holders Polyamide PATENT FEATURE CROSS CLAMP IN STAINLESS STELL Par. # 6,591,978 (USA) Ref. S00069 VG mm.7 mm n SS.7 External diameter S00070 PATENTED CROSS CLAMP ADJUSTABLE IN STAINLESS STEEL Ref. S00070 VG-629R--.7 mm.7 mm n SS PATENT FEATURE Par. # 6,427,829 B1 Par. # 6,591,978 (USA) 5 S Lc MODEL T-ROD Ref. SPACERS Material: clamps in reinforced, tubes in stainless steel. S00055 S00056 S00057 VG VG VG n S00058 Ref. VG-627S-34 n 282 CONVEYOR LINE
21 Extra cross block 3 3 EXTRA CROSS BLOCK STANDARD Material: reinforced bolts and nut in stainless steel. Note: max recommended tightening torque 3 Kgm EXTRA CROSS BLOCK WITH HANDLES Material: cross block in reinforced, bolts and nut in stainless steel, adjustable handles in reinforced with insert in nickel plated brass. Application: for use in areas where frequent adjusting is required for vertical movement. Note: max recommended tightening torque 3 Kgm V 135V 13511V 135V 13513V 135V 135V 135V 13517V 135V 13519V 135V 13521V 13522V 13523V 13524V CONVEYOR LINE 283
22 Extra cross block EXTRA CROSS BLOCK WITH HANDLES Material: cross block in reinforced, bolts and nut in stainless steel, adjustable handles in reinforced with insert in nickel plated brass. Applications: for use in areas where frequent adjusting is required for horizontal and vertical movement. Note: max recommended tightening torque 3 Kgm HV 135HV 13511HV 135HV 13513HV 135HV 135HV 135HV 13517HV 135HV 13519HV 135HV 13521HV 13522HV 13523HV 13524HV EXTRA CROSS BLOCK WITH HANDLES Material: cross block in reinforced, bolts and nut in stainless steel, adjustable handles in reinforced with insert in nickel plated brass. Applications: for use in areas where frequent adjusting is required for horizontal and vertical movement. Note: max recommended tightening torque 3 Kgm H 135H 13511H 135H 13513H 135H 135H 135H 13517H 135H 13519H 135H 13521H 13522H 13523H 13524H DF 1 DF CONVEYOR LINE
23 Bracket BRACKET WITH HAND KNOB (Hand knob/eyelet does not mark rod surface) Material: bracket in reinforced, eyelet in metal, knob in with bushing insert in nickel plated brass, washer in stainless steel. Features: knob fastening provides holding and positioning for many rods. Heavy duty construction for increased strength and rigidity BRACKET WITH SCREW OR HAND KNOB Material: bracket in reinforced, stainless steel screw, knob in with threaded insert in stainless steel. with screw with knob CONVEYOR LINE 285
24 Universal clamp for photocells or reflectors 136H 13617H 136H 13619H 136H Movement on the three axis UNIVERSAL CLAMP WITH ADJUSTABLE HANDLE FOR PHOTOCELLS OR REFLECTORS Material: clamp in reinforced, tightening bolt in stainless steel, adjustable handle in with threaded insert in nickel plated brass. Note: max recommended tightening torque 2 Kgm Movement on the three axis UNIVERSAL CLAMP FOR PHOTOCELLS OR REFLECTORS Material: clamp in reinforced, tightening bolt in stainless steel. Note: max recommended tightening torque 2 Kgm. 286 CONVEYOR LINE
25 Suitable photocell types PRK 95 LEUZE OMRON E3S-DSB WT27 SICK-WL27 SICK PRK 46 LEUZE PRK 46 LEUZE KIT UNIVERSAL CLAMP FOR PHOTOCELLS OR REFLECTORS WITH TUBE Material: cross clamp in reinforced, tightening bolt and tube in stainless steel. Note: max recommended tightening torque 2 Kgm. Movement on the three axis Ø Ø32 Ø Ø CONVEYOR LINE 287
26 Clamp for photocells or reflectors Pos.A CLAMP FOR PHOTOCELLS OR REFLECTORS Material: reinforced, tightening bolts in stainless steel. Use: can be fitted in position A - B - C Supply: assembled, (position A) Pos.B Pos.C DIA CONVEYOR LINE
27 Photocell accessories BOTTLE INDICATOR Application: activation of photocells on conveyors and machines. 1 PA-FG = 34 = hole for metal insert CONTROL CONTACT LEVER Application: activation of photocells on conveyors and machines SF with hole without hole PA-FG CONVEYOR LINE 289
28 Photocell accessories SIDE BRACKET FOR HORIZONTAL TUBES Material: bracket in reinforced, nut, bolt and washers in stainless steel CLAMP BRACKET OVER HEAD Material: bracket in reinforced, threaded bushing in nickel plated brass X CONVEYOR LINE
29 Split shafting collars SPLIT SHAFTING COLLAR Material: reinforced, bolts in stainless steel, threaded insert in nickel plated brass. Use: these parts can be used on the conveyors as a reference point when the side guides need to be repositioned. Note: The new collars offer high corrosion resistance. The new part exhibits high strength at considerably less cost than stainless steel. The new collars are the ideal replacement for conventional al collars in situation where they cannot be easily removed and replaced. Type d D L K Screws B A A B A A A A A B A A B M3 M3 M3 M4 M3 M4 M4 M4 M4 M4 M4 M5 M4 n 0 CONVEYOR LINE 291
30 Split shafting collars for shaft with keyway A H Ød K L ØD SPLIT SHAFTING COLLAR Material: reinforced, screws in stainless steel, threaded insert in nickel plated brass. Use: for shaft with key way d D A 8 P9 8 P9 P9 P9 H L K Screws M4 M4 M4 M5 n 0 IDLER SPACER For shaft Ø B L PA 292 CONVEYOR LINE
Stainless steel guide rail brackets
guide rail brackets Reinforced polyamide PATENT FEATURE Par. # 6,189,685 Par. # 6,543,608 Par. # 6,669,009 (USA) STAINLESS STEEL BRACKETS WITH LIP, EYEBOLT AND KNOB Ø Material: body in stainless steel,
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationChain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
More informationAC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
More informationPULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationB-250PD B-300PD B-500PD B-700PD B-800PD B-900PD
ITEM : 71100 ISSUED: APRIL 19, 1993 REVISED: APRIL 26, 2001 HOSHIZAKI STORAGE BIN MODEL B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD PARTS LIST B-250PD G-0 May, 1997 H-0 Dec., 1997 J-0 March, 1999 K-0
More informationGENESI: the birth of a new generation of professional spray guns that are distinguished for their reliability and precision. Conceived from the FX
GENESI GENESI: the birth of a new generation of professional spray guns that are distinguished for their reliability and precision. Conceived from the FX experience, or 15 years of intense work in the
More informationThe Slot.it pinion press/extractor tool
The Slot.it pinion press/extractor tool The SLOT.IT extractor/press is the perfect companion for the slot car enthusiast. It presses and removes pinions. Now in its 3rd release, it works for shaft of 1.5mm
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationHORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies
HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 2 of 25 Bolo Tine Assemblies 1 GW-2415 2 S/F TINE HOLDER- welded steel.
More informationAccessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
More informationSpecial valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationCode Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationHandwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
More informationPage ATALOGUE. Web: Tel: Fax:
Page ACUUM PARE ANKER ARTS ATALOGUE Page 2 CONTENTS PAGE GAUGES 3 SAUNDERS M TYPE VALVES 4 LEVER BALL VALVES 5 GATE VALVES 6 AIR ACTUATED VALVES 7 KNIFE GATE VALVES 8 ACRYLIC SIGHT TUBE 9 RUBBER SUCTION
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationLampholders. Lampholders for halogen lamps - TECHNICAL CHARACTERISTICS. Conformity to Standards EN Standard
Lampholders Lampholders for halogen lamps - TECHNICAL CHARACTERISTICS Conformity to Standards 02370 EN 60838-1 Standard Conformity to Standards LV Directive EN 60838-1 Standard Dimensions (in mm) ø 17
More informationAccessories product range
Accessories 199 Accessories product range Type SB/SBF (spiral tape) Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Page
More informationViking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
More informationHP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies
12090-8HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 2 of 23 Bolo Tine Assemblies 1 1901975001 2 S Tine Holder-welded steel, fits left or right
More informationMUELLER GAS. Shur StopTM Unit 812 PE Line Stopping. System 8" 12" SDR Reliable Connections. General Information 2
operating Instructions manual MUELLER GAS TAble of contents PAGE TM Unit 812 PE Line Stopping General Information 2 Equipment, Parts and Dimensions 3-5 Operating Instructions 6-12 Troubleshooting and Storage
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationSupport Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationInserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
More information1 01 / 201 Edition ED. 01/2007
Edition 01 / 2011 ED. 01/2007 TABLE OF CONTENENTS 1 INTRODUCTION 2 GRIPPER EXAMPLES 2.1 EXAMPLE A: GRIPPER WITH TUBES AND ALUMINIUM PROFILES 2.2 EXAMPLE B: GRIPPER WITH STAINLESS STEEL TUBES 2.3 EXAMPLE
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationDOOR TECHNOLOGY ORDER CATALOG SECTION GU-SECURY Automatic Door Lock & Lever Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.2 GU-SECURY Automatic Door Lock & Lever Handle Table of Contents 03.2 GU-SECURY Automatic Door Lock & Lever Handle GU-SECURY Automatic Automatic Door Lock...03.2.5
More informationGrade 2 Cylindrical Locksets DORMA CL700 CK700
Grade 2 Cylindrical Locksets DORMA CL700 CK700 Table of Contents CL700/CK700 Grade 2 Cylindrical Locksets Features...................................... 3 Technical Details and Specifications..................
More informationLOCKING BUSHES & SHAFT COLLARS
LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More informationLE3. ES Escutcheon Plates for CL & CLQ Mortise Lock. ES Escutcheon Plates for Euro Mortise Lock. 5 Series LE18. Lever Function
LE25 ES001, 002, 003, 006... LE14 ES004, 005... LE15 ES007, 008, 009, 014... LE16 SB201-A... LE4 SB202-A... LE4 SB203-C... LE4 SB204-Q... LE5 SB205-A... LE5 SB206-A... LE5 SB207-A... LE5 SB208-L... LE6
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationSimple, adaptable storage Ideal for tools and components Highly visible and right at hand 10 year extended guarantee
Flexible Efficiency Simple, adaptable storage Ideal for tools and components Highly visible and right at hand 10 year extended guarantee 138 www.bottltd.co.uk Perfo System Features & Benefits Page 140
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationLH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike)
107 KNOB - ON LOCK 261 L: 21.1 27 Clip fixing for easy assembly. Mounting nut not required. Special 20mm x 26mm cut out. There is no IP 65 version of this lock. 1.8mm maximum panel thickness. Clips to
More informationApplications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors and work benches
FEET PA 00.0 076/ 0 - PA, grey - Anti-skid insert NBR - All bolts are suitable for all plates Applications - Levelling of machine bases or constructions - Boards, partitions, enclosures - Tables, conveyors
More informationDCM-450BAE (HA) DCM-450BWE (HA)
71084 ISSUED: NOV. 19, 1998 REVISED: OCT. 13, 1999 HOSHIZAKI CUBELET ICE DISPENSER MODEL DCM-450BAE (HA) DCM-450BWE (HA) S LIST DCM-450BAE G-0 Dec., 1996 G-1 June, 1997 H-0 Dec., 1997 DCM-450BWE G-0 Dec.,
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More informationLevel indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
More informationRatchet P-Clamps. Rugged Bundle Management for Heavy Duty Applications
Ratchet P-Clamps Rugged Bundle Management for Heavy Duty Applications 1.0 Rugged Bundle Management for Heavy Duty Applications 2 www.hellermann.tyton.com 800.537.1512 You are always looking to reduce costs
More informationIndex. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options
belts SOMEFI is a company dedicated to the manufacture and sale of conveyors and modular handling equipment. For more than 40 years SOMEFI has offered a complete range of industrial conveyors, of flexible
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More information2106 HDCT-DUAL Belt Tracker
2106 HDCT-DUAL Belt Tracker Features Stainless steel construction Two cylinders for added tracking power and neutral positioning External bearings Two mechanical remote sensors Filter regulator unit Tracker
More informationROWEKO LOAD-SECURING EQUIPMENT
84 www.roweko.de Transportation tube for roof rack How long do you need to securely tie tubes or similar long goods onto your roof rack? How certain are you that you don t lose anything during your journey
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationCASTORS & WHEELS WDS SECTION 20 - CASTORS & WHEELS. Levelling Castors. Furniture Castors. Stainless Steel & Zinc Plated Brackets.
CASTORS & WHEELS Furniture Castors Nylon Castors Rubber Castors High Temperature Phenlic Resin Castors Stainless Steel & Zinc Plated Brackets Heavy Duty Castors Light Duty Castors Levelling Castors Individual
More informationTECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES
TECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More information40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
More informationPneumatic tools. Pneumatic tools Page 388 Pneumatic accessories Page 395
Pneumatic tools Pneumatic tools Page 388 Pneumatic accessories Page 395 387 Professional Pneumatic ools 5003, 5004 Pneumatic Impact Wrench Mini, 450 Nm extremely handy impact wrench with only 160 mm length
More informationClamping Handles & Adjustable Tension Levers. Leaflet No. A03.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A03.1 Clamping Handles & Adjustable Tension Levers I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are
More informationComplex 3D Welding Made Easy
3D 3-D WELDING TABLE SYSTEMS JIGS & FIXTURES AUTOMATION Complex 3D Welding Made Easy Quick and easy clean up Reduce down time Improve quality Call today for a FREE QUOTE 1.866.738.7039 www.forsteramerica.com
More informationArnold & Stolzenberg GmbH
product range Arnold & Stolzenberg GmbH A m e m b e r o f t h e R E N O L D - G r o u p roller chains Arnold & Stolzenberg GmbH A member of the RENOLD-Group Postbox 16 35 and 16 45 37574 Einbeck-Juliusmühle
More informationTRADITIONAL SHAFT HUB CONNECTIONS
TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationSpares Suitable for Heidelberg S Series Machines
23360 Screw Driver 515 mm. Total Length 23362 Swing Gripper Side Spring 23363 Clip For Coil Spring 20104 Chain Delivery Gripper 20109 Chain Delivery Gripper Clamp Old Type 20110 Chain Delivery Gripper
More informationCONDUFIX Cable protection system. Protective conduits Connection fittings Connection manifold 90 -flange System holder Cable assemblies
1 CONUFIX Cable protection system Protective conduits Connection fittings Connection manifold 90 -flange System holder Cable assemblies Reaching new heights in automation Contents: - CONUFIX - Advantages
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationAdjustable Clamp Holder
202 Round Jaw Coated Buret Clamp Clamp has Plastisol-coated jaws that rotate 360 and may be locked at any angle by checknut. Stamped steel with zinc plating. Length 6⅜" (162mm) jaw opening ⅜" (10mm) to
More informationSECURELY HELD. OKW ACCESSORIES are designed to be practical, thus providing you with more flexibility for your individual case.
SECURELY HELD RATIONAL HINGE AND LOCKING TECHNIQUES For easy opening of the devices. THE PRODUCT WALL / RAIL OKW offers you a comprehensive range of. Adapted to the application, our standard cases can
More informationMANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
More informationDoor Lock Collection
Door Lock Collection Table of Contents 11 Series Heavy Duty Cylindrical Lever Lock 02, 03 Heavy Duty Cylindrical Knob Lock 04, 05 22 Series Medium Duty Cylindrical Lever Lock 06, 07 Medium-Duty Cylindrical
More informationLock Junior Office Classic 48 50
junior office classic Junior Office Classic convince with timeless classic design. Engineered for high frequented doors, they achieve a large stress capacity. The numerous types fulfill variable requirements.
More informationCALEFFI. Ball shut-off valve fitted for integrated flow rate measuring sensor. 111 series 01234/13 GB. (kpa) (mm w.g.) G (m 3 /h)
Ball shut-off valve fitted for integrated flow rate measuring sensor series ACCREDITED CALEFFI 034/3 GB ISO 900 FM 654 ISO 900 No. 0003 Function The valve allows to shut the circuit off and is fitted for
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More informationCAPE TOWN DURBAN EASTERN CAPE
JOHAESBURG 2-3 rd Street, Wynberg Sandton, 2196 Tel: 011 885 2523 Fax: 011 885 2541 E-mail: sales@nusaf.co.za CAPE TOW DURBA EASTER CAPE Unit 3 Saxenburg Road Jason Pillay Wayne Higgs Blackheath, 7580
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationPrestolok 2. Push-in fitting. Catalogue UK
Prestolok Push-in fitting Index Straight connectors male - SPT F3P - p. 6 male - SPP F4P - p. 6 male - metric F8P - p. 7 female - SPP G4P - p. 7 union HPK - p. 7 unequal union HPK - p. 7 90 elbows adjustable
More informationFlow Control Equipment
Flow Control Equipment Speed Controller (With One-touch Fittings, Standard Style) Metering Valve with Silencer, Quick Exhaust Valve, Check Valve Safety Speed Control Valve Speed Controller with One-touch
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationAutomatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines.
AHC System Series MA Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
More informationCompact direct acting precision regulator
direct acting precision Components preparation and pressure adjustment / unit CONTENTS Product introduction 6 Safety precautions 62 Discrete (RJB500) 624 Block manifold (MNRJB500) 626 Block configurations
More informationCAB 3 TM marking and isolating sleeves
CAB 3 TM marking and isolating sleeves CAB 3 TM marking and isolating sleeves 388 50 388 58 388 63 Characteristics Material PA 6.6 halogen-free Installation temperature : - 5 C to + 40 C Operating temperature
More informationy, [ S Technical Symbols r = mm Radius Weight (total) new
Technical Symbols 0 y, [ S Weight (total) Length (total) Diameter (also dia. of head, of shaft, of points) Diameter Conformity with EU guidelines r = mm Radius new Catalogue page 576 Pipe Bending Systems
More informationHydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
More informationS200-SERIES. Interconnected Entrance Locks
Interconnected Entrance Locks Application Multi-family dwellings, hotel/motel, office and light duty commercial use. Performance Features Simultaneous retraction of deadbolt and latch for single-motion
More informationThe HMC Heavy Metal Chassis Construction Guide
The HMC Heavy Metal Chassis Construction Guide The Heavy Metal Chassis is constructed using two identical drive modules. The drive modules are constructed using 4 mechanical sub-assemblies. The drive modules
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More information19 - Boat Seats - Tinnie / Runabout
19 - Boat Seats - Tinnie / Runabout Tinnie Seat Cushions Fully upholstered seat cushions designed to suit tinnie seat benches. Can also be used as bench seat cushions on any type of powerboat or yacht
More informationRelated products. Can be used in vacuums and high temperatures up to 300 C
Fiber units NF series 91 18 Related products Through-beam type/diffuse type/ reflective type Fiber amplifier D3RF P.0 Fiber amplifier BRF P.130 Can be used in vacuums and high temperatures up to 300 C
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More information