CONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
|
|
- Oliver Gray
- 5 years ago
- Views:
Transcription
1 Freephone lines are open between 8.00am and 5.pm CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available in a variety of widths and materials and the belts also come in various pitches and materials. Slat Top Chains Steel Straight Running uni 810/8/815 uni 800/802/805 Side Flexing unichains Conveyor Chains uni 881 TAB uni 881 unichains Belt Systems uni Magnet Type uni 8811 uni 881 Super Flex uni 8811 Super Flex uni 8811 TAB Slat Top Chains Plastic Straight Running Plastic Chains Plastic chains are available in straight running and side flexing versions. Standard material for our plastic chains is acetal which is made in 3 different grades: D acetal polymers with selflubricating components; LF acetal polymers with improved selflubricating components; SLF acetal polymers with selflubricating additives to obtain the lowest possible friction resistance. unichains also produces plastic chains in other materials for use under special conditions. Types Available: Straight Running: uni 820/831 & uni 8. Side Flexing: uni 87 / 87 TAB, uni 880/880 TAB, uni 880 TABRT, uni 880 Superflex, uni 882 & uni 882 TAB Steel Chains uni 8 uni 820/831 Side Flexing uni 87/87 TAB unichains supplies slat top chains in straight running and sideflexing versions, with and without tabs. Magnet types are also available. unichains steel chains are made of steel alloys substantiated by certificates in the following 3 grades: Austenitic stainless steel, Ferritic stainless steel and Special hardened steel. Types Available: Straight Running: uni 810/8/815, uni 800/802/805. Side Flexing: uni 881, uni 881 TAB, uni magnet type, uni 881 Superflex, uni 8811, uni 8811 TAB, uni 8811 Superflex, uni 880/880 TAB All chains are available in a variety of widths and materials. Belt Systems uni 880 TABRT uni 880 Super Flex unichains manufacture both straight and side flexing belt systems, with side flexing uni FlexSNB being very popular. The belt systems are produced in several versions from closed to 36% open and with or without ribs. The pitches range between.7 and 50. Types Available: uni MSNB, UNI Light, uni CNB, uni SNB, uni SNB M2, uni Light EP, uni SSB, uni OPB, uni LSNB, uni MPB, uni Flex Belt, Reinforced Belts. All Belts are available in a variety of pitches and materials. uni 882 uni 882 TAB 1
2 For calls outside the UK Telephone or Fax FREEPHONE: CONVEYOR COMPONENTS We are now able to supply a full range of components to suit your conveyor. In addition we can offer a wide range of maintenance free polymer bearings featured within, some of which are ideally suited to conveyor maintenance. Illustrated here is a selection of the components available. 1 CONVEYOR COMPONENTS Drive sprockets, idler wheels, corner discs. Chain return components. Lateral guides and guide rail clamps. Adjustable heads and knobs. Side mounting and support heads. Threaded tube ends. Thermoplastic chains. Straight and corner tracks. Cross clamps. Guide rail brackets and drip tray supports. Hinges and handles. Support bases and levelling elements. 2 BEARING SUPPORTS Flanged bearing support. Pillow block support. Takeup support. Cartridge/takeup support. Support for shafts from Ø to Ø. Flanged bearing support in stainless steel. Compact pillow block support. Cartridge support. Support with high corrosion resistance. 3 LEVELLING PADS Thermoplastic, steel and stainless steel supporting feet. Fixed feet. Threaded tube ends. Articulated feet with or without mounting holes. Vibration absorbing feet. Support bases. 4 STRUCTURAL COMPONENTS Connecting joints. Panel clamps. Fixing block. Spring loaded latch. Tube ends and closing caps. Mounting profiles. Profile for plain tubes. Magnetic lock. Hinges and Handles. 5 CONVEYOR CHAINS Straight running chains. Sideflexing chains magnetic system. Sideflexing chains with rubber pads. Sideflexing chains. Straight running chains with rubber pads. Straight and corner tracks. 2
3 Freephone lines are open between 8.00am and 5.pm FLEXIBLE ROLLER MODULES for Straight & Curved Sections FLEXIBLE ROLLER MODULE Straps in reinforced Polyamide; Supplied as single modules rollers in LFAcetal; Pins, Low Noise Rollers Spacers and Bolts in Stainless Excellent for Accumulation Areas Steel AISI 4. Long life and Smooth Operation Easy and Quick Installation FLAT BAR x8 x10 SPLIT SHAFTING COLLARS SPLIT SHAFTING COLLAR Reinforced polyamide, bolts in Stainless Steel. Note: The new collars offer high These parts can be used on the conveyors corrosion resistance. The new part as a reference point when the side guides exhibits high strength at need to be repositioned. considerably less cost than stainless steel. The new collars are the ideal replacement for conventional collars in situations where they cannot be easily removed and replaced. d D L K ,1 TCEI M3 TCEI M3 TCEI M3 TCEI M5 Applications: 3
4 For calls outside the UK Telephone or Fax FREEPHONE: SUPPORT BASES BIPODS Reinforced polyamide threaded bushings and spacers in nickel plated brass, screws in Many other sizes available on all conveyor components! S/S AISI 4. please call! BIPODS 180 WITH JOINT Reinforced polyamide threaded bushings and spacers in nickel plated brass, screws in S/S AISI 4. Improved Load Resistance Improved Flex Resistance Improved Load Resistance Improved Flex Resistance BIPODS 0 WITH JOINT Reinforced polyamide, threaded bushings and spacers in nickel plated brass, screws in S/S AISI 4. Improved Load Resistance Improved Flex Resistance DFfor tube Ø 48,3 1 1/2 50, DFfor tube Ø 48,3 1 1/2 50, DFfor tube Ø 48,3 1 1/2 50,
5 Freephone lines are open between 8.00am and 5.pm SIDE GUIDE BRACKETS BRACKET WITH EYEBOLT BRACKET WITH EYEBOLT in S/S AISI 4, knob in in S/S AISI 4, knob in TRIPODS Reinforced polyamide, threaded bushings and spacers in nickel plated brass, screws in S/S AISI 4. Load Resistance Improved % Flex Resistance Improved 20% LA DF ,5 LA DF ,5 BRACKET WITH EYEBOLT BRACKET WITH EYEBOLT in S/S AISI 4, knob in in S/S AISI 4, knob in LA DF LA DF DFfor tube Ø 48,3 50, 1 1/ ,5 16,5 5
6 For calls outside the UK Telephone or Fax FREEPHONE: QUICK RELEASE ADJUSTABLE HEADS QUICK RELEASE ADJUSTABLE HEAD Simply press down the release cap to move the grooved rod to a new position. Components External Housing (polyamide) Internal Housing (see the table) Closing Cap (polyamide) Screw and nut (AISI 4) Spring (steel) INTERNAL BLOCK REINFORCED POLYAMIDE REINFORCED POLYAMIDE DF FOR CORRECT USE OF THESE PRODUCTS AND TO GET THE BEST PERFORMANCE, PLEASE CALL OUR EXPERTS. DRIVE SPROCKETS for chains series 8SSG M SPLIT SPROCKETS Polyamide, screws in S/S AISI 4, DIN 6885 key seat. Special shape of teeth compensates natural chain lengthening after prolonged use. Bore for axial locking only on request. Excellent wear and chemical resistance. Reduced noise level and quiet operation. Reinforced design. Completely closed structure, easier to clean and to disinfect. The design of the sprocket ensures smooth running and long service life. Increased keyway strength C H S 1 117,0 61,,0,26 7,8 DF
7 Freephone lines are open between 8.00am and 5.pm DRIVE SPROCKETS (CONTINUED) for chains series 8SSG M STANDARD SPROCKETS Polyamide, screws in S/S AISI 4, DIN 6885 key seat. Special shape of teeth compensates natural chain lengthening after prolonged use. Bore for axial locking only on request C H S 1 103, 61,,0,26 7,8 C H S DF SPLIT & STANDARD IDLER WHEELS for chains series 8SSG M SPLIT IDLER WHEELS Polyamide, screws in S/S AISI 4. Special shape of teeth compensates natural chain lengthening after prolonged use. Excellent wear and chemical resistance. Reduced noise level and quiet operation ,0 61,,0,26 7,8 C H S DF Reinforced design. Completely closed structure, easier to clean and to disinfect. The design of the sprocket ensures smooth running and long service life STANDARD IDLER WHEELS DF Polyamide. Special shape of teeth compensates natural chain lengthening after prolonged use ,0 61,,0,26 7,8 7
SPROCKETS for belts series
eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationSingle action two way cross block
Connecting clamps Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More information+91-8048762018 Spectra Plast India Private Limited http://www.systemplaast.com/ Spectra Plast India Pvt. Ltd. is a renowned manufacturer and exporter of a comprehensive range of conveyor components and
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationTableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
More informationStainless steel guide rail brackets
guide rail brackets Reinforced polyamide PATENT FEATURE Par. # 6,189,685 Par. # 6,543,608 Par. # 6,669,009 (USA) STAINLESS STEEL BRACKETS WITH LIP, EYEBOLT AND KNOB Ø Material: body in stainless steel,
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationProfile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
More informationMaryland Metrics: How to order: Please prefix the P.T.I. part number or description with R305- example: R305-RAK201-8A Table of Contents.
Table of Contents Product.... Inside Cover General Overview.....2 Mounted Ball Bearings - Metric / Inch Ball Bearing Selection & Interchange......8 Pillow Blocks......14 Tapped Base......36 4-Bolt Flange
More informationCV-Series. Single Curve Conveyors
CV-Series Single Curve Conveyors J O I N T H E Q U I E T R E V O L U T I O N I N C O N V E Y O R T E C H N O L O G Y V-Series Engineered to have the tightest turning radius in the industry. Built for nearly
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationDOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
More informationRoller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More informationPin-guided clutch with three flyweights
S-Type Pin-guided clutch with three flyweights Construction and mode of operation 2 5 4 3 3 1 1 5 2 6 4 = Hub = Flyweights = Cylindrical pin = Tension spring = Lining = Clutch drum / Cover disc Low noise
More informationFlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationSPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationParts Rollers. Urethane Rollers Urethane Idlers 1.38" Flange Rollers 2.5" 2.5" 2.5" 4" 9.5" 3.6" 6.56"
A full line of drive sprockets, friction drive rollers, shakers, flails, and rollers of all types (steel, urethane, and rubber) are available for use with Noffsinger Belt Chain and Hook Chain conveyors.
More informationROLLERS SERIES 3500 Fixed drive conveyor roller. ROLLERS SERIES 3500 Fixed drive conveyor roller. Technical data
Application area Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires. Low-noise The use of polyamide drive heads results in very quiet running. Lateral loading
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationHO-Series Horizontal Offset Conveyors
HO-Series Horizontal Offset Conveyors your Material Handling Specialist HO-Series Engineered for dependable, nearly maintenance-free operation. Flexibility in turning radius and straight length for almost
More informationRexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationAdvised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationServing Industrial Markets Since 1961:
Full Line Brochure Clutches Brakes Clutch Brakes Caliper Brakes & Rotors Torque Limiters Air Shaft Seals Sheaves Serving Industrial Markets Since 1961: Food Processing & Packaging Material Handling Printing
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationS ST-SeriesBrochure_modified:STSeriesBrochure.qxd2/4/20091:32PMPage17 ST- T Series Straight Conveyors -Series your Material Handling Specialist
ST-Series ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009 1:32 PM Page 17 ST-Series Straight Conveyors your Material Handling Specialist ST-SeriesBrochure_modified:ST Series Brochure.qxd 2/4/2009
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:
More informationuni-chains Belt Systems
unichains Belt Systems Guarantee unichains guarantees for one year against defects caused by faults in design, production or material. 2002, unichains A/S. Copying or reproduction of this catalogue is
More informationRex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationSTRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG - 8257 VG 54 55 SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG - 879 TAB VG - 879 M VG 882 TAB VG - 882 M
More informationLOCKING BUSHES & SHAFT COLLARS
LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)
More informationCONTENTS. HT200/HTD Synchronous Belt Drives. Features/Benefits... PT11-2
CONTENTS HT200/HTD Synchronous Belt Drives V-Drives Features/Benefits.......................................... PT11-2 Specification HT TAPER-LOCK Sprockets................................ PT11-4 MPB &
More informationTransportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationChain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
More informationROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationOne Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
More informationForged Chains & Sprockets
Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty
More informationSempell High Pressure Stop Valves Model VA510 (DIN)
Designed for highest pressure and temperature applications using high alloy or stainless steels. Features T-pattern globe type Body made of forged steel Wear resistant stellite body seat Conical seat with
More information2011 E M E R S O N. C O N S I D E R I T S O L V E D.TM
Conveyor Components June 11 E M E R S O N. CO N S I D E R I T S O LV E D. TM Via Guareschi, 2 Via San Giuseppe, 54 Quality and Service Your expectation, our standard. Customers expect the best from SystemPlast;
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationisaregisteredtrademarkofcustom Machine&ToolCo.,Inc.Copyright Custom Machine&ToolCo.,Inc.Alrightsreserved.
CMT isaregisteredtrademarkofcustom Machine&ToolCo.,Inc.Copyright 1998-2017Custom Machine&ToolCo.,Inc.Alrightsreserved. WHAT IS CONCENTRIC MAXI TORQUE? CMT is a revolutionary new keyless tapered bushing,
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationSpare parts catalogue Rev
37 Drop-In 6 Spare parts catalogue Rev.2-2016 Drop-In 6 T1 - Machine Assembly www.autocable.be 1 Machine frame 1 000796 2 Engine Assembly 1 000797 3 Idler Assembly 1 000798 4 Closure wheel Assembly 1 000651
More informationAir Champ RPM DPC-15T DPC-13T DPC-11T DPC-11T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T
DUAL PLATE FRICTION CLUTCH SELECTION CHART Friction clutch recommendation is based upon air pressure of 50 psi, transmitted horsepower and speed. RPM 100 200 300 400 500 600 700 800 900 1000 1100 1200
More informationUNIT HANDLING PARCEL WAREHOUSING DISTRIBUTION FOOD
UNIT HANDLING PARCEL WAREHOUSING DISTRIBUTION FOOD PACKAGE HANDLING FOOD PARCEL, WAREHOUSING, AND DISTRIBUTION In this fast-paced environment, it is vital to have conveyor components that can keep up.
More informationRexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationSection K WC1335 AND WC15 SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE INDEX
INDEX Section K WC33 AND WC SERIES CONVEYORS TUBE / UNDERCARRIAGE / DRIVE Description Page WC33 basic conveyor... K2-3 WC basic transfer... K4- WC70 basic tube... K-7 WC80 basic tube... K8-9 WC90 basic
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More informationAt Dyno we make the world of business go round. Up and down. And side to side.
Roller Catalogue 2017 SECTION At Dyno we make the world of business go round. Up and down. And side to side. Our conveyors make moving meat, veges, fruit, packages, gravel, and even luge sleds simple and
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationFeed Rolls 3940 and 3960 PTFH Upper Feed Rolls
Feed Rolls Upper Feed Rolls 12 3940 and 3960 PTFH 3940 and 3960 PTFH Feed Rolls 46 KEY PART NO. PART NAME QTY. SERIAL NO. 00 REMARKS 1 E52437 BUSHING 1 XX 2 34H353 SPRING PIN 1 X X 3/8" X 1-3/4" 3 24H1480
More informationMEYER MATE 9.0 CU FT. SPREADER
MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry
More informationThe following table shows various types of drop forged chains, together with the respective breaking loads and core/surface hardness.
Drop forged chain The drop forged chains supplied by Bechtel are made of heat treated high grade alloy steel. These links can be equipped with plastic or steel scrapers. The following table shows various
More informationCross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks
Cross Tensioners Cross Tensioners provide constant belt or chain tension. Their automatic tensioning action translates into improved performance and extended life for most types of fixed-centre drives.
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationPRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationSS 63mm Stainless Steel Conveyor System
SS 63mm Stainless Steel Conveyor System SS FlexMove Product Catalogue 319 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. FV Series
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationSTRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/
STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS
More informationFlexLink conveyor Series Y
FlexLink conveyor Series Y 3 Introduction New conveyor with focus on hygiene The new FlexLink hygiene conveyor was designed to meet the following requirements of special interest to the dairy, food, and
More informationlea) shows a compression type. These couplings are used for
Mechanical Equipment - Course 230.1 SHAFT COUPLINGS Couplings Couplings are used to join two shafts provide some means of transmitting power source to a driven member. There are two tiona of couplings,
More informationVisual index NEW PRODUCTS NEWS NEWS PHARMA PHARMA PHARMA. To be continued on next page
NEWS 3 2013 Visual index Stainless Stainless 2012 NEW PRODUCTS Stainless NEWS Pin with weldable fastening button Stainless Panel fastening p.n1 button Stainless p.n2 Aluminium hinge external fastening
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationBE2136 CONVEYOR OVEN REPLACEMENT PARTS MANUAL (with WIRING DIAGRAMS)
SPL111205-PF-BD November 12, 2005 BE2136 CONVEYOR OVEN REPLACEMENT PARTS MANUAL (with WIRING DIAGRAMS) Serial Tag Location EFFECTIVE with SERIAL #401811005 and AFTER Serial # Code First 4 digits - order
More informationmk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
More informationLP & HP Series Turntable Stretch Wrapping Systems
LP & HP Series Turntable Stretch Wrapping Systems Flex turntable stretch wrappers are available in three configurations so you can be sure to find the right machine for your application. Automatic Flex
More information