Supersonic Nozzle Design for 1µm Laser Sources
|
|
- Esther Cummings
- 5 years ago
- Views:
Transcription
1 Supersonic Nozzle Design for 1µm Laser Sources Ali Khan Bill O Neill Innovative Manufacturing Research Centre (IMRC) Centre for Industrial Photonics Institute for Manufacturing, Department of Engineering, University of Cambridge. ahk31@cam.ac.uk Date 20 th Feb 2008
2 Contents Laser Material Processing system Overview Characteristics of sonic/conical nozzle Characteristics of supersonic nozzle Standard laser cutting (gas-jet interaction) Annulus gas jet Supersonic side-jet Side-jet cutting trials Kerf width and gas-jet relationship Standard laser cutting trials (2mm Mild Steel) Laser assisted Oxygen Cutting (LASOX) trials Laser drilling trials Entrance/Exit diameter with 1.5mm, 2.17mm sonic & 1.0mm supersonic nozzle. Average maximum recast/oxide analysis 1-D approach to supersonic nozzle design Axisymmetric approach to supersonic nozzle design Straight sonic line Curved sonic line Comparison with other commercially available code (case study) Conclusion Date 20 th Feb
3 Overview Significant improvements Laser output Optical components Cutting head Very little improvement in nozzles Date 20 th Feb
4 Sonic / Conical nozzle characteristics Free stream characteristics with inlet gas pressures Impinging characteristics with standoff distance Date 20 th Feb
5 Supersonic nozzle characteristics Free stream characteristics with inlet gas pressures Impinging characteristics with standoff distance Gas Inlet Pressure 8 bar oxygen Date 20 th Feb
6 Standard laser cutting (gas-jets interaction) Flow separation is a major problem Flow separation is less sever for supersonic nozzle Date 20 th Feb
7 Annulus gas-jet Improvement in the flow separation Date 20 th Feb
8 Supersonic side jet Flow separation eliminated But gas speed is less Date 20 th Feb
9 Side jet cutting trials Good performance with Al Little affect on Stainless Steel Date 20 th Feb
10 Gas jet and kerf relationship Flow separation minimised with smaller nozzle Smaller nozzles difficult to manufacture and align Date 20 th Feb
11 Standard laser cutting trials Laser 200W SPI redpower Nozzles 1.0mm De-Laval, 1.0mm Sonic & 0.5mm De-Laval Gas oxygen, 2 12 bar Focal length 70mm Focal position - +1 Standoff - 1mm Material 2mm Mild Steel Date 20 th Feb
12 Performance / Comparison (Nozzle type & Diameter) Optimum performance at 8bar 1.0mm & 0.5mm De-Laval designed for 8bar Date 20 th Feb
13 Cut quality assessment Date 20 th Feb
14 Laser assisted O 2 cutting (LASOX) Sonic nozzle does not work! Date 20 th Feb
15 Laser drilling (Diameter) Laser PRIMA (JK704) single rod Beam diameter ~ 14mm 15mm Beam quality (M 2 ) ~ Focal length = 200mm Gas = oxygen Pressure = 6.2 bar (90PSI) Material 2mm Ni Drilling angle 19 o to the surface Consistent performance from Supersonic Nozzle. Larger entrance/exit diameter: Higher drilling rate. Date 20 th Feb
16 Laser drilling (Recast & Oxide) Supersonic nozzle produces lowest recast and oxide level Date 20 th Feb
17 Date 20 th Feb D approach to Supersonic Nozzle Design. ( ) ( ) = γ γ γ γ r r r M M A A Quasi-One-Dimensional Theory Very difficult to obtain uniform flow
18 Families of Convergent-Divergent nozzles De-Laval nozzle:- smooth and gradual expansion Minimum length nozzle (MLN):- sudden expansion Date 20 th Feb
19 d Axisymmetric approach to Supersonic Nozzle Design. Method of Characteristics dr dx ( θ ± υ) = tan( θ ± µ ) ± 1 2 ( M 1) ± cotθ Characteristic Equation dr = 0 Compatibility Equation r Date 20 th Feb
20 Nozzle contours (straight sonic line) MLN Gas oxygen Pressure 8 bar Throat dia. 2mm Mach No Centred Prandtl expansion MLN No centre expansion Require sonic line extension De-Laval No centre expansion Final geometry dependent on the Throat radius curvature ratio Re Date 20 th Feb
21 Curved sonic line Mixed supersonic and subsonic flow at the throat Sonic line position depends on the ratio (Re) of throat curvature to throat radius Cuffel et at (1969), Transonic Flowfield in a Supersonic Nozzle with small Throat Radius of Curvature, AIAA, vol,7, Dutton et al (1980), Transonic Flow in the Throat Region of Axisymmetric Nozzles, AIAA, vol 19 Date 20 th Feb
22 Complete nozzle contour Subsonic Region: 1-D Ideal Gas Theory Transonic Region: Perturbation Velocity Potential Supersonic Region: Method of Characteristics Date 20 th Feb
23 Computational Inlet Parameters. Choose Gas Type (10 gas species and their properties are in the data base). Customise gas properties with Boundary Layer Menu. Specify Nozzle inlet parameters. Date 20 th Feb
24 Two supersonic nozzle designs De-Laval MLN or Bell Date 20 th Feb
25 Design validation (CFD) Comparison with other available code 5 4 Nozzle type: MLN Nozzle Radius, [mm] M = 1 M < 1 M > 1 MLN de-laval_bell Throat location Inlet pressure: 12 bar Gas type: Nitrogen Inlet temp.: 298K Throat dia.: 5.3mm Exit Mach No. : 2.23 Axisymmetric Nozzle Length, [mm] Date 20 th Feb
26 CFD validation (Mach No. Contour) Current MLN nozzle design is superior Date 20 th Feb
27 Free stream gas jet performance Centreline Mach Number, [-] MLN Design Laval-Bell Design Centreline Total Pressure, [bar] MLN Design Laval-Bell Design Axial distance from nozzle exit, [mm] Axial distance from nozzle exit, [mm] MLN under-expanded by 0.96% (accuracy of 99.04%). Laval Bell over-expanded by 57.7% (accuracy of 42.3%). Laval Bell design pressure 100% to 7mm, 80% to 80mm, and 30% to130mm. MLN design pressure 100% > 120mm (>23 nozzle diameters). Date 20 th Feb
28 Conclusion. Supersonic nozzles can be beneficial in laser material processing Flow from supersonic nozzle is more stable than sonic nozzle Supersonic nozzle can provide better control than sonic nozzle Supersonic nozzle is operable to >12 nozzle diameter compared to just 2 from sonic nozzle Uniform expansion is only achieved with accurate nozzle design Nozzle inlet geometry depends on the inlet pressure Sonic line location depends on the radius of curvature Final nozzle geometry depends on sonic line position One supersonic nozzle for one pressure MLN shows greater promise for laser material processing Shorter length than De-Laval Easier to manufacture Cost the same as sonic / conical nozzle Difficult to design Smaller diameter nozzles may provide better process performance while minimising gas consumption. Date 20 th Feb
29 Date 20 th Feb
Nose 1. Nose 2 Nose 3. Nose 4 Nose 5. Nose 6 Nose 7
Nose 1 Nose 2 Nose 3 Nose 4 Nose 5 Nose 6 Nose 7 Nose 1 - Existing design C L value = 0.044 C D value = -0.053 The existing design shows a high pressure region under the nose giving a lift value. A shock
More informationLect-28. In this lecture...
1 In this lecture... Lect-28 Performance of intakes Performance parameters Sources of losses Starting problem in supersonic intakes Modes of operation of an external compression intake 2 Intake performance
More informationFlow nozzle for in-pipe installation, model FLC-FN-PIP Flow nozzle for flange assembly, model FLC-FN-FLN Venturi nozzle, model FLC-FN-VN
Flow measurement Flow nozzle for in-pipe installation, model FLC-FN-PIP Flow nozzle for flange assembly, model FLC-FN-FLN WIKA data sheet FL 10.03 Applications Power generation Oil production and refining
More informationIn this lecture... Fixed and variable geometry nozzles Functions of nozzles Thrust vector control Thrust reversal Noise control
1 In this lecture... Nozzle: Fixed and variable geometry nozzles Functions of nozzles Thrust vector control Thrust reversal Noise control 2 Exhaust nozzles Nozzles form the exhaust system of gas turbine
More informationCFD Analysis on a Different Advanced Rocket Nozzles
International Journal of Engineering and Advanced Technology (IJEAT) CFD Analysis on a Different Advanced Rocket Nozzles Munipally Prathibha, M. Satyanarayana Gupta, Simhachalam Naidu Abstract The reduction
More informationIn this lecture... Prof. Bhaskar Roy, Prof. A M Pradeep, Department of Aerospace, IIT Bombay
1 In this lecture... Intakes for powerplant Transport aircraft Military aircraft 2 Intakes Air intakes form the first component of all air breathing propulsion systems. The word Intake is normally used
More informationFig 2: Grid arrangements for axis-symmetric Rocket nozzle.
CFD Analysis of Rocket-Ramjet Combustion Chamber 1 Ms. P.Premalatha, Asst. Prof., PSN College of Engineering and Technology, Tirunelveli. 1prema31194@gmail.com 1 +91-90475 26413 2 Ms. T. Esakkiammal, Student,
More informationDesign and Test of Transonic Compressor Rotor with Tandem Cascade
Proceedings of the International Gas Turbine Congress 2003 Tokyo November 2-7, 2003 IGTC2003Tokyo TS-108 Design and Test of Transonic Compressor Rotor with Tandem Cascade Yusuke SAKAI, Akinori MATSUOKA,
More informationOverdense gas jets for ion acceleration studies
Overdense gas jets for ion acceleration studies Nicholas Dover John Adams Institute at Imperial College London 2 nd Ion Instrumentation Workshop, École Polytechnique 7-8 th June 2012 http://www.adams-institute.ac.uk
More informationComparative Study and Analysis of Air Ejector Flow in Convergent and Convergent Divergent Nozzle of Aircraft
Comparative Study and Analysis of Air Ejector Flow in Convergent and Convergent Divergent Nozzle of Aircraft Milan Motta 1, E.Srikanth Reddy 2, V.Upender 3 1,2,3 Mechanical Engineering Department, JNTU,
More informationPreliminary Design Document ASEN 4018
1 of 28 Contents 2 Project Description 3 2.1 Project Purpose........................................... 3 2.2 Objectives............................................... 3 2.3 CONOPS...............................................
More informationStudy on Flow Fields in Variable Area Nozzles for Radial Turbines
Vol. 4 No. 2 August 27 Study on Fields in Variable Area Nozzles for Radial Turbines TAMAKI Hideaki : Doctor of Engineering, P. E. Jp, Manager, Turbo Machinery Department, Product Development Center, Corporate
More informationPlasma Assisted Combustion in Complex Flow Environments
High Fidelity Modeling and Simulation of Plasma Assisted Combustion in Complex Flow Environments Vigor Yang Daniel Guggenheim School of Aerospace Engineering Georgia Institute of Technology Atlanta, Georgia
More informationCOMET GAS CONSUMABLES
Insta COMET GAS CONSUMABLES CIGWELD.COM.AU CIGWELD introduces the next generation of Comet gas consumables, featuring a gas equipment world first in black nickel plating. This patented innovation from
More informationExperiments in a Combustion-Driven Shock Tube with an Area Change
Accepted for presentation at the 29th International Symposium on Shock Waves. Madison, WI. July 14-19, 2013. Paper #0044 Experiments in a Combustion-Driven Shock Tube with an Area Change B. E. Schmidt
More informationCOMPUTATIONAL ANALYSIS DIAMOND-SHAPED STRUT INJECTOR FOR SCRAMJET COMBUSTOR AT MACH 4.3 S. Roga1,K.M. Pandey2 and A.P.Singh3 1
ISSN: 2395-3594 IJAET International Journal of Application of Engineering and Technology Vol-2 No.-2 COMPUTATIONAL ANALYSIS DIAMOND-SHAPED STRUT INJECTOR FOR SCRAMJET COMBUSTOR AT MACH 4.3 S. Roga1,K.M.
More informationin ultra-low NOx lean combustion grid plate
CFD predictions of aerodynamics and mixing in ultra-low NOx lean combustion grid plate flame stabilizer JOSÉ RAMÓN QUIÑONEZ ARCE, DR. ALAN BURNS, PROF. GORDON E. ANDREW S. SCHOOL OF CHEMICAL AND PROCESS
More informationTransactions on Modelling and Simulation vol 10, 1995 WIT Press, ISSN X
Flow characteristics behind a butterfly valve M. Makrantonaki," P. Prinos,* A. Goulas' " Department of Agronomy, Faculty of Technological Science, University of Thessalia, Greece * Hydraulics Laboratory,
More informationFEDSM NUMERICAL AND EXPERIMENTAL FLOW ANALYSIS OF A CRYOGENIC POWER RECOVERY TURBINE
Proceedings of FEDSM 98 1998 ASME Fluids Engineering Division Summer Meeting June 1-5, 1998, Washington, DC FEDSM98-4988 NUMERICAL AND EXPERIMENTAL FLOW ANALYSIS OF A CRYOGENIC POWER RECOVERY TURBINE Nick
More informationIJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 11, 2016 ISSN (online):
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 11, 2016 ISSN (online): 2321-0613 Effect of Aspiration Pressure on Convergent Nozzle Employed for Gas Atomization of Liquid
More informationHIGH VELOCITY THERMAL GUN FOR SURFACE PREPARATION AND TREATMENT. I.A. Gorlach
HIGH VELOCITY THERMAL GUN FOR SURFACE PREPARATION AND TREATMENT I.A. Gorlach Department of Industrial Engineering School of Process and Mechanical Engineering Technikon Witwatersrand Johannesburg, South
More informationStudy of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car
Journal of Physics: Conference Series PAPER OPEN ACCESS Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car To cite this article: A Norizan et al 2017
More informationA NOVEL DESIGN METHOD OF VARIABLE GEOMETRY TURBINE NOZZLES FOR HIGH EXPANSION RATIOS
A NOVEL DESIGN METHOD OF VARIABLE GEOMETRY TURBINE NOZZLES FOR HIGH EXPANSION RATIOS Lei Huang 1, Hua Chen 2, * 1. National Laboratory of Engine Turbocharging Technology, North China Engine Research Institute,
More informationPrediction of Thermal Deflection at Spindle Nose-tool Holder Interface in HSM
Prediction of Thermal Deflection at Spindle Nose-tool Holder Interface in HSM V Prabhu Raja, J Kanchana, K Ramachandra, P Radhakrishnan PSG College of Technology, Coimbatore - 641004 Abstract Loss of machining
More informationPERFORMANCE ESTIMATION AND ANALYSIS OF PULSE DETONATION ENGINE WITH DIFFERENT BLOCKAGE RATIOS FOR HYDROGEN-AIR MIXTURE
PERFORMANCE ESTIMATION AND ANALYSIS OF PULSE DETONATION ENGINE WITH DIFFERENT BLOCKAGE RATIOS FOR HYDROGEN-AIR MIXTURE Nadella Karthik 1, Repaka Ramesh 2, N.V.V.K Chaitanya 3, Linsu Sebastian 4 1,2,3,4
More informationCartridge Valve and Manifold Technologies
Energy Efficient Hydraulics and Pneumatics Conference Cartridge Valve and Manifold Technologies A Components Approach to Improved Energy Efficiency How Can Components Lead to Greater Energy Efficiency?
More informationDesign and Analysis of Restricted Air Intake for Performance Optimization of Single-Cylinder Engine
RESEARCH ARTICLE OPEN ACCESS Design and Analysis of Restricted Air Intake for Performance Optimization of Single-Cylinder Engine Darshit Jangid 1, Akshay Sharma 2, Vaibhav Dhama 3 1(Mechanical Engineering,
More informationAdvanced Aerodynamic Design Technologies for High Performance Turbochargers
67 Advanced Aerodynamic Design Technologies for High Performance Turbochargers TAKAO YOKOYAMA *1 KENICHIRO IWAKIRI *2 TOYOTAKA YOSHIDA *2 TORU HOSHI *3 TADASHI KANZAKA *2 SEIICHI IBARAKI *1 In recent years,
More informationCOMPUTATIONAL AND EXPERIMENTAL STUDY ON SUPERSONIC FILM COOLING FOR LIQUID ROCKET NOZZLE APPLICATIONS
Vijayakumar, V.,, et al.: Computational and Experimental Study on Supersonic... THERMAL SCIENCE: Year 2015, Vol. 19, No. 1, pp. 49-58 49 COMPUTATIONAL AND EXPERIMENTAL STUDY ON SUPERSONIC FILM COOLING
More informationInvestigation of converging slot-hole geometry for film cooling of gas turbine blades
Project Report 2010 MVK160 Heat and Mass Transport May 12, 2010, Lund, Sweden Investigation of converging slot-hole geometry for film cooling of gas turbine blades Tobias Pihlstrand Dept. of Energy Sciences,
More informationEFFECT OF INJECTION ORIENTATION ON EXHAUST EMISSIONS IN A DI DIESEL ENGINE: THROUGH CFD SIMULATION
EFFECT OF INJECTION ORIENTATION ON EXHAUST EMISSIONS IN A DI DIESEL ENGINE: THROUGH CFD SIMULATION *P. Manoj Kumar 1, V. Pandurangadu 2, V.V. Pratibha Bharathi 3 and V.V. Naga Deepthi 4 1 Department of
More informationEffects of Dilution Flow Balance and Double-wall Liner on NOx Emission in Aircraft Gas Turbine Engine Combustors
Effects of Dilution Flow Balance and Double-wall Liner on NOx Emission in Aircraft Gas Turbine Engine Combustors 9 HIDEKI MORIAI *1 Environmental regulations on aircraft, including NOx emissions, have
More informationABSTRACT I. INTRODUCTION III. GEOMETRIC MODELING II. LITERATURE REVIW
2017 IJSRSET Volume 3 Issue 5 Print ISSN: 2395-1990 Online ISSN : 2394-4099 Themed Section: Engineering and Technology Performance Analysis of Helical Coil Heat Exchanger Using Numerical Technique Abhishek
More informationEffect of concave plug shape of a control valve on the fluid flow characteristics using computational fluid dynamics
Effect of concave plug shape of a control valve on the fluid flow characteristics using computational fluid dynamics Yasser Abdel Mohsen, Ashraf Sharara, Basiouny Elsouhily, Hassan Elgamal Mechanical Engineering
More informationSupersonic Combustion Experimental Investigation at T2 Hypersonic Shock Tunnel
Supersonic Combustion Experimental Investigation at T2 Hypersonic Shock Tunnel D. Romanelli Pinto, T.V.C. Marcos, R.L.M. Alcaide, A.C. Oliveira, J.B. Chanes Jr., P.G.P. Toro, and M.A.S. Minucci 1 Introduction
More informationCorresponding Author, Dept. of Mechanical & Automotive Engineering, Kongju National University, South Korea
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:15 No:04 62 A Study on Enhancing the Efficiency of 3-Way Valve in the Fuel Cell Thermal Management System Il Sun Hwang 1 and
More informationModelling of Shock Waves and Micro Jets Using CFD Analysis
P P IJISET - International Journal of Innovative Science, Engineering & Technology, Vol. 3 Issue 10, October 2016 Modelling of Shock Waves and Micro Jets Using CFD Analysis 2 1 1 2 Dr.I.SatyanarayanaP
More informationDesign Rules and Issues with Respect to Rocket Based Combined Cycles
Respect to Rocket Based Combined Cycles Tetsuo HIRAIWA hiraiwa.tetsuo@jaxa.jp ABSTRACT JAXA Kakuda space center has been studying rocket based combined cycle engine for the future space transportation
More informationSupersonic (Engine) Inlets
School of Aerosace Engineering Suersonic (Engine) Inlets For air-breathing engines on suersonic vehicles, usually want to slow flow down to subsonic seeds inside engine need diffuser (M>1 M
More informationCFD ANALYSIS TO INVESTIGATE THE EFFECT OF LEANED ROTOR ON THE PERFORMANCE OF TRANSONIC AXIAL FLOW COMPRESSOR STAGE
20th Annual CFD Symposium August09-0, 208, Bangalore, Karnataka, India CFD ANALYSIS TO INVESTIGATE THE EFFECT OF LEANED ROTOR ON THE PERFORMANCE OF TRANSONIC AXIAL FLOW COMPRESSOR STAGE AKASH M M Tech
More informationExperimental Testing of a Rotating Detonation Engine Coupled to Nozzles at Conditions Approaching Flight
25 th ICDERS August 2 7, 205 Leeds, UK Experimental Testing of a Rotating Detonation Engine Coupled to Nozzles at Conditions Approaching Flight Matthew L. Fotia*, Fred Schauer Air Force Research Laboratory
More informationSTEALTH INTERNATIONAL INC. DESIGN REPORT #1001 IBC ENERGY DISSIPATING VALVE FLOW TESTING OF 12 VALVE
STEALTH INTERNATIONAL INC. DESIGN REPORT #1001 IBC ENERGY DISSIPATING VALVE FLOW TESTING OF 12 VALVE 2 This report will discuss the results obtained from flow testing of a 12 IBC valve at Alden Research
More informationAerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System
Vehicle Engineering (VE) Volume 2, 2014 www.seipub.org/ve Aerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System Yingchao Zhang 1, Linlin Ren 1, Kecheng Pan 2, Zhe Zhang*
More informationAnalysis of Scramjet Engine With And Without Strut
Analysis of Scramjet Engine With And Without Strut S. Ramkumar 1, M. S. Vijay Amal Raj 2, Rahul Mahendra Vaity 3 1.Assistant Professor NIT Coimbatore, 2. U.G.Student, NIT Coimbatore 3.U.G.Student MVJ College
More informationThe influence of shear layer control on DDT
2 127 The influence of shear layer control on DDT D.I. Baklanov, * T.A. Bormotova, V.V. Golub, A.A. Makeich, V.V. Volodin Russian Academy of Sciences, Moscow 127412, Russia J.M. Meyers, and F.K. Lu **
More informationReductions in Multi-component Jet Noise by Water Injection
Reductions in Multi-component Jet Noise by Water Injection Thomas D Norum * NASA Langley Research, Hampton, VA, 23681 An experimental investigation was performed in the NASA Langley Low Speed Aeroacoustics
More informationNumerical simulation of detonation inception in Hydrogen / air mixtures
Numerical simulation of detonation inception in Hydrogen / air mixtures Ionut PORUMBEL COMOTI Non CO2 Technology Workshop, Berlin, Germany, 08.03.2017 09.03.2017 Introduction Objective: Development of
More informationOptimization of Packed Tower Inlet Design by CFD Analysis. Dana Laird Koch-Glitsch, Inc.
39e Optimization of Packed Tower Inlet Design by CFD Analysis Dana Laird Koch-Glitsch, Inc. Brian Albert ExxonMobil Research and Engineering (formerly with Koch-Glitsch, Inc.) Carol Schnepper John Zink
More informationDESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR
DESIGN AND ANALYSIS OF UNDERTRAY DIFFUSER FOR A FORMULA STYLE RACECAR Ali Asgar S. Khokhar 1, Suhas S. Shirolkar 2 1 Graduate in Mechanical Engineering, KJ Somaiya College of Engineering, Mumbai, India.
More informationMETHANE/OXYGEN LASER IGNITION IN AN EXPERIMENTAL ROCKET COMBUSTION CHAMBER: IMPACT OF MIXING AND IGNITION POSITION
SP2016_3124927 METHANE/OXYGEN LASER IGNITION IN AN EXPERIMENTAL ROCKET COMBUSTION CHAMBER: IMPACT OF MIXING AND IGNITION POSITION Michael Wohlhüter, Victor P. Zhukov, Michael Börner Institute of Space
More informationMeasurement of thermocouple emf using potentiometer & milivoltmeter. Milivoltmeter consists of a PMMC type meter. The coil gets magnetised when the
Measurement of thermocouple emf using potentiometer & milivoltmeter. Milivoltmeter consists of a PMMC type meter. The coil gets magnetised when the voltage is applied across the coil. The coil rotates
More informationNacelle Chine Installation Based on Wind-Tunnel Test Using Efficient Global Optimization
Trans. Japan Soc. Aero. Space Sci. Vol. 51, No. 173, pp. 146 150, 2008 Nacelle Chine Installation Based on Wind-Tunnel Test Using Efficient Global Optimization By Masahiro KANAZAKI, 1Þ Yuzuru YOKOKAWA,
More informationGujarat, India,
Experimental Analysis of Convergent, Convergent Divergent nozzles at various mass flow rates for pressure ratio and pressure along the length of nozzle Rakesh K. Bumataria 1, Darpan V. Patel 2, Sharvil
More informationEngine Performance Analysis
Engine Performance Analysis Introduction The basics of engine performance analysis The parameters and tools used in engine performance analysis Introduction Parametric cycle analysis: Independently selected
More informationComparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2012 Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured
More informationCOMPRESSIBLE FLOW ANALYSIS IN A CLUTCH PISTON CHAMBER
COMPRESSIBLE FLOW ANALYSIS IN A CLUTCH PISTON CHAMBER Masaru SHIMADA*, Hideharu YAMAMOTO* * Hardware System Development Department, R&D Division JATCO Ltd 7-1, Imaizumi, Fuji City, Shizuoka, 417-8585 Japan
More informationAPPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS
APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS BorgWarner: David Grabowska 9th November 2010 CD-adapco: Dean Palfreyman Bob Reynolds Introduction This presentation will focus
More informationSupersonic Combustion Flow Visualization at Hypersonic Flow
Supersonic Combustion Flow Visualization at Hypersonic Flow T.V.C. Marcos, D. Romanelli Pinto, G.S. Moura, A.C. Oliveira, J.B. Chanes Jr., P.G.P. Toro, and M.A.S. Minucci 1 Introduction Currently, a new
More informationComparison of Velocity Vector Components in a Di Diesel Engine: Analysis through Cfd Simulation
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X PP. 55-60 www.iosrjournals.org Comparison of Velocity Vector Components in a Di Diesel Engine: Analysis
More informationFLUIDIC THRUST VECTORING NOZZLES
FLUIDIC THRUST VECTORING NOZZLES J.J. Isaac and C. Rajashekar Propulsion Division National Aerospace Laboratories (Council of Scientific & Industrial Research) Bangalore 560017, India April 2014 SUMMARY
More informationCOMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report R0. By Kimbal A.
COMPUTATIONAL FLOW MODEL OF WESTFALL'S 2900 MIXER TO BE USED BY CNRL FOR BITUMEN VISCOSITY CONTROL Report 412509-1R0 By Kimbal A. Hall, PE Submitted to: WESTFALL MANUFACTURING COMPANY May 2012 ALDEN RESEARCH
More informationPerformance Evaluation of an IC Engine in the Presence of a C-D Nozzle in the Air Intake Manifold
Research Article International Journal of Current Engineering and Technology ISSN 2277-4106 2013 INPRESSCO. All Rights Reserved. Available at http://inpressco.com/category/ijcet Performance Evaluation
More informationSINGLE-PHASE CONVECTIVE HEAT TRANSFER AND PRESSURE DROP COEFFICIENTS IN CONCENTRIC ANNULI
UNIVERSITY OF PRETORIA SOUTH AFRICA SINGLE-PHASE CONVECTIVE HEAT TRANSFER AND PRESSURE DROP COEFFICIENTS IN CONCENTRIC ANNULI By: Warren Van Zyl Supervisors: Dr J Dirker Prof J.P Meyer 1 Topic Overview
More informationEffects of Spent Cooling and Swirler Angle on a 9-Point Swirl-Venturi Low-NOx Combustion Concept
Paper # 070IC-0023 Topic: Internal combustion and gas turbine engines 8 th U. S. National Combustion Meeting Organized by the Western States Section of the Combustion Institute and hosted by the University
More informationAutomatic CFD optimisation of biomass combustion plants. Ali Shiehnejadhesar
Automatic CFD optimisation of biomass combustion plants Ali Shiehnejadhesar IEA Bioenergy Task 32 workshop Thursday 6 th June 2013 Contents Scope of work Methodology CFD model for biomass grate furnaces
More informationSR-71 Inlet Design Issues And Solutions Dealing With Behaviorally Challenged Supersonic Flow Systems
SR-71 Inlet Design Issues And Solutions Dealing With Behaviorally Challenged Supersonic Flow Systems 3/4/14 Tom Anderson 1 A-12, SR-71 Inlet Designers Dave Campbell SR-71 Inlet Designer Propulsion Boss
More informationInnovative Centrifugal Compressor Design
Innovative Centrifugal Compressor Design L. Tarnowski TURBOMECA groupe SAFRAN INTRODUCTION SP2 : IRA (Intercooled Recuperative Aero-engine) Task 2.2.5 HP Centrifugal Compressor Design The challenge is
More informationProduct Data Sheet WokaStar Series Advanced Liquid-Fuel HVOF Spray Guns
Product Data Sheet WokaStar Series Advanced Liquid-Fuel HVOF Spray Guns The Oerlikon Metco WokaStar Advanced Liquid- Fuel HVOF Spray Guns are an excellent choice when coatings of the highest quality and
More informationTURBOPROP ENGINE App. K AIAA AIRCRAFT ENGINE DESIGN
CORSO DI LAUREA SPECIALISTICA IN Ingegneria Aerospaziale PROPULSIONE AEROSPAZIALE I TURBOPROP ENGINE App. K AIAA AIRCRAFT ENGINE DESIGN www.amazon.com LA DISPENSA E E DISPONIBILE SU http://www.ingindustriale.unisalento.it/didattica/
More informationNumerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler
Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 2016 Paper No. CSP 105 DOI: 10.11159/csp16.105 Numerical Investigation of the Effect of
More informationNumerical Simulation of the Flow through the Rotor of a Radial Inflow Turbine
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS 345 E. 47th St.. New York, N.Y. 10017 97;GT-90 The Society shall not be responsible for statements or opinions advanced in papers or eascussion at meetings
More informationMechanism and Performance of a Novel Atomizer with Supersonic Configuration
Mechanism and Performance of a Novel Atomizer with Supersonic Configuration Muh-Rong Wang and Pin-Jen Chen Department of Aeronautics and Astronautics National Cheng Kung University, Taiwan 1. Introduction
More informationInfluence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2014 Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating
More informationNozzle Design of Hot Strip Steel Temperature Measurement Device and Analysis of its Flow Field Characteristics
Send Orders for Reprints to reprints@benthamscience.ae 550 The Open Mechanical Engineering Journal, 2014, 8, 550-556 Open Access Nozzle Design of Hot Strip Steel Temperature Measurement Device and Analysis
More informationNumerical Analysis of Chevron Nozzle with Various Configurations for Noise Reduction
Numerical Analysis of Chevron Nozzle with Various Configurations for Noise Reduction Nevis Jenifer G 1, Selva Preethi G 2 P.G. Student, Department of Aeronautical Engineering, School of Aeronautical Science,
More informationCFD Analysis and Comparison of Fluid Flow Through A Single Hole And Multi Hole Orifice Plate
CFD Analysis and Comparison of Fluid Flow Through A Single Hole And Multi Hole Orifice Plate Malatesh Barki. 1, Ganesha T. 2, Dr. M. C. Math³ 1, 2, 3, Department of Thermal Power Engineering 1, 2, 3 VTU
More informationA Framework for Energy Saving Device (ESD) Decision Making
A Framework for Energy Saving Device (ESD) Decision Making Authors: J. H. de Jong, G.J.D. Zondervan Presented by J.H. de Jong Contents 1. Background 2. Propulsion improvement 3. Practical application of
More informationYARWAY NARVIK MODEL 88 SPID SMALL PIPE INLINE DESUPERHEATER
A wide range of desuperheaters, pneumatic actuators, strainers to satisfy all specifications of the power, pulp and paper industry and process gas applications FEATURES Fabricated construction Special
More informationFigure 1: The spray of a direct-injecting four-stroke diesel engine
MIXTURE FORMATION AND COMBUSTION IN CI AND SI ENGINES 7.0 Mixture Formation in Diesel Engines Diesel engines can be operated both in the two-stroke and four-stroke process. Diesel engines that run at high
More informationA Performance Comparison of Two Small Rocket Nozzles
NASA Technical Memorandum 107285 AIAA 96 2582 A Performance Comparison of Two Small Rocket Nozzles Lynn A. Arrington NYMA, Inc. Brook Park, Ohio Brian D. Reed Lewis Research Center Cleveland, Ohio Angel
More informationHeat Transfer in Rectangular Duct with Inserts of Triangular Duct Plate Fin Array
Heat Transfer in Rectangular Duct with Inserts of Triangular Duct Plate Fin Array Deepak Kumar Gupta M. E. Scholar, Raipur Institute of Technology, Raipur (C.G.) Abstract: In compact plate fin heat exchanger
More informationDevelopment of a Supersonic Aerodynamic Test Section Using Computational Modeling
39th AIAA Fluid Dynamics Conference 22-25 June 2009, San Antonio, Texas AIAA 2009-3573 Development of a Supersonic Aerodynamic Test Section Using Computational Modeling Richard R. Mitchell * and Frank
More informationLiquid Rocket Engine TCA
Liquid Rocket Engine TCA TCA -1 Thrust Chamber Assembly (TCA) TCA=combustion chamber+nozzle Design goals produce desired thrust with high efficiency high combustion efficiency and uniformity into nozzle
More informationTHE EFFECT OF BLADE LEAN ON AN AXIAL TURBINE STATOR FLOW HAVING VARIOUS HUB TIP RATIOS. Dr. Edward M Bennett
THE EFFECT OF BLADE LEAN ON AN AXIAL TURBINE STATOR FLOW HAVING VARIOUS HUB TIP RATIOS Dr. Edward M Bennett ABSTRACT The effect of simple lean on an axial turbine stator was examined using a threedimensional
More informationEXPERIMENTAL STUDIES OF INJECTOR ARRAY CONFIGURATIONS FOR CIRCULAR SCRAMJET COMBUSTORS
EXPERIMENTAL STUDIES OF INJECTOR ARRAY CONFIGURATIONS FOR CIRCULAR SCRAMJET COMBUSTORS Christopher Rock Graduate Research Assistant and Joseph A. Schetz Advisor, Holder of the Fred D. Durham Chair Department
More informationIMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING
REFEREED PAPER IMPROVING BOILER COMBUSTION USING COMPUTATIONAL FLUID DYNAMICS MODELLING VAN DER MERWE SW AND DU TOIT P John Thompson, Sacks Circle, Bellville South, 7530, South Africa schalkv@johnthompson.co.za
More informationComputational Analysis of Hydrogen-Fueled Scramjet Combustor with Diamond-Shaped Strut Injector at Mach 4
Computational Analysis of Hydrogen-Fueled Scramjet Combustor with Diamond-Shaped Strut Injector at Mach 4 Dr. Sukanta Roga 1, Dr. K.M. Pandey 2 1 Associate Professor, Department of Mechanical Engineering,
More informationScramjet Engine Research of KARI : Ground Tests of Engines and Components
23 rd ICDERS July 24-29, 211 Irvine, USA Scramjet Engine Research of KARI : Ground Tests of Engines and Components Soo Seok Yang, Sang Hun Kang, Yang Ji Lee Aero Propulsion System Department, Korea Aerospace
More informationFuel Injection and Combustion Study for Mach Scramjet. Dora E. Musielak University of Texas at Arlington
Fuel Injection and Combustion Study for Mach 10-12 Scramjet Dora E. Musielak University of Texas at Arlington dmusielak@uta.edu ABSTRACT A research program to support the development of scramjet engine
More informationSteam-condensation from singlesteam-hole
Steam-condensation from singlesteam-hole as well as from annulargap steam injector Lars Hamberg Tetra Pak Processing System Questions of interest for Tetra Pak concerning Steam Injection What types of
More informationNUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT
NUMERICAL INVESTIGATION OF PISTON COOLING USING SINGLE CIRCULAR OIL JET IMPINGEMENT BALAKRISHNAN RAJU, CFD ANALYSIS ENGINEER, TATA CONSULTANCY SERVICES LTD., BANGALORE ABSTRACT Thermal loading of piston
More informationNumerical Simulation of Gas Turbine Can Combustor Engine
Numerical Simulation of Gas Turbine Can Combustor Engine CH UMAMAHESHWAR PRAVEEN 1*, A HEMANTH KUMAR YADAV 2 1. Engineer, CDG BOEING Company, Chennai, India. 2. B.Tech Aeronautical Engineer 2012 passout,
More informationMohammad Faisal Haider. Department of Mechanical Engineering Bangladesh University of Engineering and Technology
Mohammad Faisal Haider Lecturer Department of Mechanical Engineering Bangladesh University of Engineering and Technology Steam Turbine 2 Vapor Power Cycle 4 5 Steam Turbine A steam turbine is prime mover
More informationHY-V SCRAMJET INLET Christina McLane Virginia Polytechnic Institute and State University
HY-V SCRAMJET INLET Christina McLane Virginia Polytechnic Institute and State University Abstract Hy-V is an undergraduate student-led scramjet engine test project. There are multiple teams at several
More informationInternational Journal of Scientific & Engineering Research, Volume 5, Issue 7, July-2014 ISSN
ISSN 9-5518 970 College of Engineering Trivandrum Department of Mechanical Engineering arundanam@gmail.com, arjunjk91@gmail.com Abstract This paper investigates the performance of a shock tube with air
More informationDesign, Construction and Testing of a Desktop Supersonic Wind Tunnel
Design, Construction and Testing of a Desktop Supersonic Wind Tunnel Vi H. Rapp, Jennifer Jacobsen, Mark Lawson, Andrew Parker, Kuan Chen * Department of Mechanical Engineering University of Utah Salt
More informationNumerical Simulation of Cavity Fuel Injection and Combustion for Mach Scramjet. Dora E. Musielak University of Texas at Arlington
Numerical Simulation of Cavity Fuel Injection and Combustion for Mach 10-12 Scramjet Dora E. Musielak University of Texas at Arlington ABSTRACT We report the results from a study of cavity flame holding
More informationIn this lecture... Components of ramjets and pulsejets Ramjet combustors Types of pulsejets: valved and valveless, Pulse detonation engines
In this lecture... Components of ramjets and pulsejets Ramjet combustors Types of pulsejets: valved and valveless, ulse detonation engines Ramjet engines Ramjet engines consist of intakes, combustors and
More informationOptimisation of Double Pipe Helical Tube Heat Exchanger and its Comparison with Straight Double Tube Heat Exchanger
DOI 1.17/s432-16-261-x ORIGINAL CONTRIBUTION Optimisation of Double Pipe Helical Tube Heat Exchanger and its Comparison with Straight Double Tube Heat Exchanger Rashid Kareem 1 Received: 3 June 214 / Accepted:
More informationEnhanced Heat Transfer Surface Development for Exterior Tube Surfaces
511 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 32, 2013 Chief Editors: Sauro Pierucci, Jiří J. Klemeš Copyright 2013, AIDIC Servizi S.r.l., ISBN 978-88-95608-23-5; ISSN 1974-9791 The Italian
More information