SYK,SONYUNG INDUSTRY CO.,LTD. No.16, Lane 117,Sec. 1,Chang-Nan Rd., Chang-Hua City, Chang-Hua Hsien, Taiwan TEL: FAX:
|
|
- Coral Ward
- 5 years ago
- Views:
Transcription
1 SYK,SONYUNG INDUSTRY CO.,LTD. 16, Lane 117,Sec. 1,Chang-Nan Rd., Chang-Hua City, Chang-Hua Hsien, Taiwan TEL: FAX: Support Unit BK (fixed-side rectangular type) name 2 Bearing 1 set 3 Holding lid 1 4 Collar 1 5 Seal 1 set 6 Lock nut 1 7 Hexagon socket-head Setscrew(with set piece) 1 Unit: mm Model L L1 L2 L3 B H b ±0.02 h ±0.02 B1 H1 E P C1 C2 d2 X Y Z M T BK M3 16 BK M3 19 BK M3 22 BK M4 24 BK M4 30 BK M5 35 BK M6 40 BK M8 50 BK M8 50
2 Support Unit BF (supported-side rectangular type) name 2 Bearing 1 set 3 Snap ring 1 Model. D1 L B H b ±0.02 Unit: mm h ±0.02 B1 H1 E P d2 X Y Z Bearing Snap Ring BF ZZ S 08 BF ZZ S 10 BF ZZ S 15 BF ZZ S 17 BF ZZ S 20 BF ZZ S 25 BF ZZ S 30 BF ZZ S 35 BF ZZ S 40
3 Support Unit EK (fixed-side rectangular type) EK4,5 EK6, 8 name 2 Bearing 1 set 3 Holding lid 1 4 Collar 1 5 Seal 1(2) 6 Lock nut 1 7 Hexagon socket-head Setscrew(with set piece) 1 EK10 20 Unit : mm Model L L1 L2 L3 B H NOTE:Remark * products are made-to-order. b ±0.02 h ±0.02 B1 H1 P X Y Z M T *EK M3 10 *EK M3 11 *EK M3 12 EK M3 14 EK M3 16 EK M3 19 EK M3 22 EK M4 30
4 Support Unit EF (supported-side rectangular type) name 2 Bearing 1 3 Snap ring 1 Unit: mm Model L B H NOTE:Remark * products are made-to-order. b ±0.02 h ±0.02 B1 H1 P X Y Z Bearing Snap Ring *EF ZZ S 06 EF ZZ S 06 EF ZZ S 08 EF ZZ S 10 EF ZZ S 15 EF ZZ S 20
5 Support Unit FK (fixed-side round type) Mounting method A FK10 30 Mounting method B name 2 Bearing 1 set 3 Holding lid 1 4 Collar 1 5 Seal 1 set 6 Lock nut 1 7 Hexagon socket-head Setscrew(with set piece) 1 Unit : mm Model L H F E D A PCD B FK FK FK FK FK FK Mounting method A L1 T1 Mounting method B L2 T2 X Y Z M T M M M M M M6 40
6 Support Unit FK (fixed-side round type) name 2 Bearing 1 set 3 Holding lid 1 4 Collar 2 5 Seal 1 6 Lock nut 1 7 Hexagon socket-head Setscrew(with set piece) 1 Mounting method A FK4 8 Mounting method B Model No L H F E D A PCD B *FK *FK *FK FK NOTE:Remark * products are made-to-order Mounting method A L1 T1 Mounting method B L2 T2 Unit:mm X Y Z M T M M M M3 14
7 Support Unit FF (supported-side round type) Model *FF FF FF FF FF NOTE:Remark * products are made in accordance with customer order. name 2 Bearing 1 3 Snap ring 1 Unit : mm L H F D A PCD B X Y Z Bearing Snap Ring FF FF ZZ S ZZ S ZZ S ZZ S ZZ S ZZ S ZZ S 30
8 Support Unit AK (fixed-side rectangular type) name 2 Bearing 1 set 3 Holding lid 1 4 Collar 1 5 Seal 1 set 6 Lock nut 1 7 Hexagon socket-head Setscrew(with set piece) 1 Unit: mm Model NO. L L1 L2 L3 B H b ±0.02 h ±0.02 B1 H1 E 1 P E d2 X Y Z M T AK M3 16 AK M3 19 AK M3 22
9 Support Unit AF (supported-side rectangular type) name 2 Bearing 1 set 3 Snap ring 1 Model. L B H b ±0.02 h ±0.02 B1 H1 E P d2 X Y Z Bearing Snap Ring AF ZZ S 08 AF ZZ S 10 AF ZZ S 15
10 Support Units Model & Bearing Type Comparsion Table Support Unit Model Fixed-side angular contact ball bearing Bearing type Model Support Unit Model Bearing type Model Support Unit Model Supported-side deep groove ball bearing Bearing type Model EK6-P FK6-P EK8-P FK8-P EK10-P FK10-P BK10-P EK12-P FK12-P BK12-P EK15-P FK15-P BK15-P BK17-P EK20-P FK20-P BK20-P BK25-P FK25-P BK30-P FK30-P BK35-P BK40-P 706ATY DFC7P5 708ATY 7000ATY 7001ATY 7002ATY 7203ATY 7204ATY 7004ATY DFC7P5 7205ATY 7206ATY 7207CTY DFC7P5 7208CTY EK6 FK6 EK8 FK8 EK10 FK10 BK10 EK12 FK12 BK12 EK15 FK15 BK15 NSK606DFP0 EF8 NSK606ZZ NSK608DFP0 EF8 NSK606ZZ NSK7000AWDFP0 NSK7001AWDFP0 NSK7002AWDFP0 EF10 FF10 BF10 EF12 FF12 BF12 EF15 FF15 BF15 NSK608ZZ NSK6000ZZ NSK6002ZZ BK17 NSK7203AWDFP0 BF17 NSK6203ZZ EK20 FK20 BK25 FK25 BK30 FK30 NSK7204AWDFP0 EF20 FF20 NSK6204ZZ BK20 NSK7004AWDFP0 BF20 NSK6004ZZ NSK7205AWDFP0 NSK7206AWDFP0 BF25 FF25 BF30 FF30 NSK6205ZZ NSK6206ZZ BK35 NSK7207AWDFP0 BF35 NSK6207ZZ BK40 NSK7208AWDFP0 BF40 NSK6208ZZ
11 Type of Support Units and applicable Screw-shaft s Fixed-side support unit applicable model Supported-side support unit ID(mm) Supported-side support unit applicable model 4 EK4 FK EK5 FK EK6 EF6 6 FK6 FF6 8 EK8 EF8 Fixed-side support unit ID(mm) FK8 EK10 FK10 BK10 EK12 FK12 BK12 EK15 FK15 BK FF6 EF10 FF10 BF10 EF12 FF12 BF12 EF15 FF15 BF15 Applicable screw shaft OD (mm) 10 10, 12, 14 14, 15, BK17 17 BF17 20, EK20 FK20 BK20 FK25 BK25 FK30 BK EF20 FF20 BF20 FF25 BF25 FF30 BF30 25, 28 32, 36 40, BK35 35 BF BK40 40 BF40 50
12 Recommended shaft end shape( Fixed-side) for Support Units typesbk Unit: mm Support unit Ballscrew support Metric screw thread model shaft OD portion OD Type BK d D B E F M S BK10 14/ M10*1 16 BK12 16/ M12*1 14 BK M15*1 12 BK M17*1 17 BK20 28/30/ M20*1 15 BK M25* BK M30* BK M35* BK40 50/ M40*1.5 35
13 Recommended shaft end shape( Fixed-side) for Support Units typesfk,ek mm Support unit model Ballscrew shaft OD support portion OD Unit: Metric screw thread Type FK&EK d D B E F M S FK6&EK M6* FK8&EK M8*1 10 FK10&EK10 14/ M10*1 11 FK12&EK12 16/ M12*1 11 FK15&EK15 20/ M15*1 13 FK20&EK20 28/30/ M20*1 17 FK M25* FK M30*1.5 25
14 Recommended shaft end shape( Supported-side) for Support Units typesff,ef,bf Unit: mm Support unit model Snap-ring groove Ballscrew shaft OD support FF EF BF d D E B F G FF10 EF10 BF10 14/ FF12 EF12 BF12 16/ FF15 EF15 BF15 20/ BF FF20 EF20 (BF20)Note 28/30/ (16) (13.35) 1.35 FF BF FF BF BF BF40 50/ Note: In this table,dimensions in parenthesis are those of type BF20.These dimensions differ from those of type F20&EF20.
15
Support Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More informationSupport Unit. Support Unit. Structure and Features. Models EK, BK, FK, EF, BF and FF. Ball Screw Peripherals 508-2E 508-2E
Models K, BK, FK, F, BF and FF Uses the Optimal Bearing To ensure the rigidity alance with the Ball Screw, the uses an angular earing (contact angle: 30 ; DF con guration) with a high rigidity and a low
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationSupport Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
More information36 Taunton Drive Cheltenham VIC 1~~.. ~!!l!1llt!f! ~ '"!ll!~mijiim
HWM Motion Control and System T.echnology 36 Taunton Drive Cheltenham VC 1~~.. ~!!l!1llt!f! ~ '"!ll!~mijiim rw ~~to.,,. 03 9585 739 DYNAMiCS info@. d d. mouoo y tem.ao wmpooeo" WWW. n UStrla ynamlcs.com.au
More informationPrecision lock nut Hydraulic nut Wedge block WBK bearing seat
Precision lock nut Hydraulic nut Wedge block WBK bearing seat Locking device The locking device applied by the precision bearing to axially position on the shaft would be manufactured with high precision.
More informationTable1 MBF, MDK, BNF, BIF BNK Y 3. Fixed Side : H, J Supported Side : K Ball Screw/Spline BNS-A, BNS, NS-A, NS 5. Table2 MTF
Model Number Coding The model number confi guration for ball screws differs depending on the type. Table1 Refer to the corresponding configuration example shown in Table3. THK can also provide shaft end
More informationTable1 BNF, BIF. Finished Shaft Ends BNK Y 3 BLR, DIR. Supported Side : K Ball Screw/Spline BNS-A, BNS, NS-A, NS 5. Table2 JPF, BTK-V, MTF, WHF, BLK,
Model Number Coding The model number confi guration for ball screws differs depending on the type. Table1 Refer to the corresponding configuration example shown in Table3. THK can also provide shaft end
More informationType SFKR - single nut with flange Type RSKR - single nut, cylindrical with thread Type RSCR - single nut, cylindrical with thread...
BALL SCREWS Svanemærket tryksag 541-713 INDEX Index Type SFKR - single nut with flange... 4 Type RSKR - single nut, cylindrical with thread... 5 Type RSCR - single nut, cylindrical with thread... 6 Type
More informationWBK 08 S - 01 A WBK 25 DF - 31H. Accessories. (For light load) (For high speed and heavy load) 3. Reference number coding
3. Reference number coding (For light load) xample: Product code for support unit ominal size code * WK 8 S - 1 ounting code o code: Fixed support unit S: Simple support unit SF: Simple support unit (for
More informationSITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
More informationRB TUBE CUTTER. Date of issue: August 2007
RB TUBE CUTTER Date of issue: August 2007 Model 30mini (NEW) Model 22 (NEW) Contents 1. RB Tube Cutter 22 2. RB Tube Cutter 30miniS/30miniP 3. RB Tube Cutter 30/30S/30PE 4. RB Tube Cutter 42/42S/42PE 5.
More informationETKA : Year. Model UPD. Illustrat. Restrictions EPIS 656. et_bild.frm
-00 3 et_bild.frm -00 3 Pos Part Number Description Remark Qty door lock front *with installation of new *lock cylinder set, *identity changes; *modify control unit *and start button! () 3C 05 A door lock
More informationLinear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides
PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range
More informationImpact Sockets & Accessories
HEAVY BOLTING APPLICATIONS Impact Sockets & Accessories A complete solution for every tool application Ph: 1300 WALTAN (1300 925 826) 6 POINT SOCKETS 12 POINT SOCKETS IN-HEX DRIVERS ADAPTORS UNIVERSAL
More informationDEEP GROOVE BALL BEARINGS
DEEP GROOVE BALL BEARINGS MOVING THE WHEELS OF THE INDUSTRY ABOUT NRB INDUSTRIAL BEARINGS LIMITED NRB Industrial Bearings Ltd is the industrial arm of the NRB Group. We manufacture bearings for various
More informationCONTENTS ALTERNATE FOR SUN ROOF C2 ALTERNATE FOR WINDSHIELD BATTERY CHARGER BODY 2
SUN ROOF C2 2 FITTING ELECTRICAL 1 0-11 A1 REAR ARM SUSPENSION 1 JW2-F2110-00-00 REAR ARM COMP.......... 1 2 JN6-F2123-10-00 BUSH 1.................. 1 3 90105-13864-00 BOLT, FLANGE............ 1 4 90179-13878-00
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
More informationframe, spindle case dated: 01/17
frame, spindle case dated: 01/17 1 Powered by TCPDF (www.tcpdf.org) frame, spindle case dated: 01/17 Item no. Description Article no. Quantity 1 Caution sticker RO 87080 1 2 Caution plate RO 87081 1 3
More informationMODEL 3192A lb. AIR/HYDRAULIC TELESCOPIC TRANSMISSION JACK
UPDATED 3/06 PART KIT INCLUDES ORDER NUMBER KIT DESCRIPTION REF. # DESCRIPTION 3192AK02C CYLINDER 1 BASE KIT 2 CYLINDER 3 RESERVOIR 7 O-RING 65-5.7 8 RAM 9 O-RING 140-5.7 10 TOP NUT 11 PACKING 12 O-RING
More informationModel No. EK8100 POWER CUTTER
1 / 7 2 / 7 3 / 7 4 / 7 5 / 7 6 / 7 7 / 7 1 / 5 Item Parts No. Description I/C Qty N/O Opt. 1 Opt. 2 Note 001 168507-3 TANK CAP COMPLETE 1 D10 INC. 2 002 213080-9 O RING 29.5 1 003 163499-1 SUCTION HEAD
More informationSNR Linear Motion: Ball screws
SNR Linear Motion: Ball screws A global manufacturer of bearings. For almost a century, SNR has designed, developed and manufactured bearings to meet the most demanding of applications. In April 2008,
More informationIntroduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1
Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.
More informationPrecision Rolled Ball Screws Main features:
Ball Screws Precision Rolled Ball Screws Main features: Compact ball nut heralding in the next generation standard. Extended maintenance free operation with NSK K1 lubrication unit and new grease retaining
More informationBall Screw. General Catalog A-661
General Catalog A-661 Features and Types Ball Screw Features of the Ball Screw Driving Torque One Third of the Sliding Screw With the Ball Screw, balls roll between the screw shaft and the nut to achieve
More informationBall Screw Support Units. Outline. Compact Support Units. Variation
all Screw s Outline Variation Compact smsu seriesprovide 2 choices of ousin type, which are illow type and Flane type. Fixed side and supported side Units are standardized for each type. In case of illow
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 6100 Series Industrial Center Drive Conveyors Table of Contents Warnings General Safety......................... 2 Introduction....................................
More informationSTRENGTH Enclosed head design seals out contaminants for improved performance and life.
T H E P E R F O R M A Enclosed head design seals out contaminants for improved performance and life. Torque wrap design reduces stress on gear and pawl teeth. Innovative linear ball bearing system eliminates
More informationMOTION TECHNOLOGIES PTY LTD. Slew Ring Bearings
MOTION TECHNOLOGIES PTY LTD Slew Ring Bearings - Typical Types - Single Row, Four Point Contract, Ball - Flanged, Single Row Ball, 4 Point Contact - Double Flanged, Non-Geared - Double Row Ball Page 1
More informationLT Spare parts list. Rammer. Valid from serial number. LT mm, (11 in.) 2015 Construction Tools EOOD No
LT 8005 Spare parts list Rammer LT 8005 280 mm, (11 in.) LT 8005 330 mm, (11 in.) Valid from serial number BGF000001 BGF000001 2015 Construction Tools EOOD No. 9800 1735 01 2015-12-11 LT 8005 Spare parts
More informationSPARE PART LIST POWER LIFTKET
Issue January 2014 SPARE PART LIST POWER LIFTKET version 235/50 SP-Code Description Description of spare part section Page AA Lifting gear 01: Hoist body 4-5 02: Clutch Brake 6-7 03: Motor 8 04: Chain
More informationSL1Series. Compact Horizontal Limit Switches
Compact Horizontal Limit Switches SL1Series Mechanical life of 0 million operations. Robust long-life and maintenance-free compact horizontal-type limit switches with IP67 seal. Mechanical life exceeds
More informationPOWER STEERING PUMP (3VZ FE) POWER STEERING PUMP REMOVAL AND INSTALLATION Remove and install the parts as shown.
STEERING SR41 PUMP (3VZFE) PUMP REMOVAL AND INSTALLATION Remove and install the parts as shown. SR42 STEERING (MAIN POINTS OF REMOVAL AND INSTALLATION) 1. REMOVE PRESSURE TUBES Using SST, remove the pressure
More informationThe Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
More informationF Series Drive Shafts, SMV and Miscellaneous Series Drive Shafts and Related Components
Page - 800 Series Drive Shafts and Related Components 800 Series Drive Shafts and Tube ssemblies (800 Series) 800 Series Drive Shafts, SMV and Miscellaneous 4 Slow Moving Vehicle Signs 5 Skid Loader and
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW NEW Contents Description Data Sheet No. Page Overview.4.E 3-3 Plain bearing guide SLIDELINE.4.E 33-34 Roller guide POWERSLIDE.4.3E 35-38 Ball bushing guide GUIDELINE.4.4E
More informationUnited States Patent (19)
United States Patent (19) Chang et al. 54) (76) 21 22 51 52 (58 56) MOTOR DRIVEN SCISSORS JACK FOR AUTOMOBLES Inventors: Shoei D. Chang; Huey S. Liaw, both of 11, Lane 250, Sec. 1, Kuo Guang Rd., Da Li
More informationRepair Manual VW 02T gearbox. INA GearBOX
Repair Manual VW 02T gearbox INA GearBOX Special tools Repair Manual for the VW 02T gearbox Drain the transmission fluid (arrow). Remove the gearbox from the vehicle in accordance with the vehicle manufacturer
More information8WH6 ipo Installation Terminals
/2 Introduction /4 8WH through-type terminals /6 8WH through-type screw terminals /8 8WH N-conductor isolating terminals /10 8WH N-conductor isolating screw terminals /12 8WH installation terminals More
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationParts catalogue LAWN MOWER
OREC ISSUED NO. GR537,GR538-01 Parts catalogue LAWN MOWER (EXPORT MODEL) GR537(2Action) GR538(2Action) MODEL GR537 GR538 CODE 0268-0270 - CONTENTS TRANSMISSION ------------------------- 1 SAFETY COVER
More informationStandard screw fittings Brass Art. No to
251.02 Reducing nipple, short type Art. No. Ident No. Male thread Female thread 290.940 108010 M14x1.5 M10x1.0 11.0 7.0 17 290.941 108011 M24x1.5 M16x1.5 24.0 16.0 27 251.00 111101 G 1/8 M5 11.0 7.0 14
More informationRB TUBE CUTTER. Model 30mini NEW
RB TUBE CUTTER Date of issue: August 2007 Model 30mini NEW Model 22 NEW CONTENTS 1. RB tube cutter22 2. RB tube cutter 28,28S 3. RB tubu cutter30minis, minip 4. RB tubu cutter30,30s,30p 5. RB tube cutter42,42s,42p
More informationWrenches. Slogging wrenches Open ended impact slogging wrenches. Double flex wrenches. Ring type impact slogging wrenches.
Slogging wrenches Open ended impact slogging wrenches. Stock Size Length Width Height Price No mm mm mm mm 902024 24 178 14.5 2.4 22.50 902027 27 180 15.5 25.2 22.50 90200 0 190 16.2 0.0 27.50 90202 2
More informationELS Electronic Lighting System
ELS Electronic Lighting System T-8 Lamp Replacement November, 2012 99-20374-I001 I. T-8 Lamp Replacement Instructions Center Mullion Fixtures 1. Turn light power off before start of lamp replacement. 2.
More informationCOUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS
COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications
More informationStep 4 Press the sleeve gear assembly through the center of the bearing plate assembly so that the gear and bearing are in contact.
Rotational Center (ip-3009_page) : DATE: 0//207 QTY Parts Needed On This Page Tools Needed On This Page AM-303 40T Steer Gear, plated Arbor Press AM-0253 /2" ID, /2" Long Bushing 5/32 Allen Wrench AM-002
More informationwww.tranzx.com 2 0 1 9 www.tranzx.com 80, NAN DEE LANE, SHAN HSI VILLAGE, SHOU SHUI HSIANG, 504 CHANG HUA HSIEN, TAIWAN R.O.C. T:+886-4-7681756 F:+886-4-7680575 JD-YSP07 / Pat. 150/170mm travel ICR (internal
More informationTechnical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
More informationTable of Contents. Ball bearings
Table of Contents Single Row Deep Groove Ball s Nomenclature... Page B-1 Interchange... Page B-2 Applications... Page B-2 Features... Page B-3 Internal Clearance... Page B-4 Snap Ring and Groove Dimensions...
More informationR. S. Impex. https://www.indiamart.com/r-s-impex/
+91-8048602491 R. S. Impex https://www.indiamart.com/r-s-impex/ We R.S. Impex are one of the leading Importers / dealers since two decades of many reputed brand accessories & spares for various machinery.
More informationrev 1_ XML02
1 DECK, MOTOR, BLADE 2 1 DECK, MOTOR, BLADE 1 1 273675-0 GRIP A 1 1 2 266459-3 TAPPING SCREW 5X25 2 1 3 453250-0 LOCK LEVER 1 1 4 453251-8 LOCK LEVER SUPPORT 1 1 5 233173-6 COMPRESSION SPRING 4 1 1 6 144077-6
More informationBritish Autogard Ltd 2 Wilkinson Road, Love Lane Industrial Estate, Cirencester, GL7 1YT, UK Tel: Fax:
British Autogard Ltd 2 Wilkinson Road, Love Lane Industrial Estate, Cirencester, GL7 1YT, UK Tel: +44-1285 640333 Fax: +44-1285 659476 Installation and maintenance manual 200 series torque limiter The
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationSCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET PIECE TORX SCREWDRIVER SET 8 PIECE 1000 VOLT INSULATED SCREWDRIVER SET
Quality Since 1908 SCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET Slotted Tips: 3.5x75, 4x100, 5.5x100, 6.5x150, 8x150 Pozidriv Tips: Pz1x100, Pz2x125, Pz0x75 26.35 11.26 List Price 37.61 Ref:
More informationREAR ARM & SUSPENSION
A REAR ARM & SUSPENSION JW-F0--00 REAR ARM COMP. JN-F-0-00 BUSH 900-00-00 909-00-00 NUT 90-000-00 BOLT 990-000-00 WASHER, SPRING 990-000-00 WASHER, PLATE JN-F-0-00 BUSH 9 9-0-00 0 90-00-00 NUT, SELF-LOCKING
More informationNHP Exhaust Boxster Muffler V2 Installation Instructions and Tech Tips.
NHP Exhaust Boxster Muffler V2 Installation Instructions and Tech Tips. Thank you for purchasing your new Porsche 986 NHP Exhaust System, below you will find installation instructions to help you complete
More informationREASSEMBLY MT INSTALL 1ST AND REVERSE SHIFT ARM (a) Install the shift arm and shift arm pivot onto the interlock bracket.
30 RA61F MANUAL TRANSMISSION MANUAL TRANSMISSION UNIT REASSEMBLY 1. INSTALL 1ST AND REVERSE SHIFT ARM (a) Install the shift arm and shift arm pivot onto the interlock bracket. D033725 (b) Install a new
More informationRexroth. Spare parts list. Bosch Group. Part No.: R Designation: A4VG28HW1/30R-PZC10N001E-S
: R909442713 : A4VG28HW1/30R-PZC10N001E-S *G* R909709194 1 R909434314 ROTARY GROUP L 2 R909600897 CONTROL, HYDRAULIC L 3 R909428735 PORT PLATE WITH VALVES L 6 R909600949 CONTROL MODULE L 8 R909426341 HOUSING
More information1-5 TON CAPACITY. When ordering replacement parts, please specify the following:
Effective: June 3, 2007 PARTS LIST HARRINGTON MOTORIZED TROLLEY MS3 SERIES -5 TON CAPACITY IMPORTANT When ordering replacement parts, please specify the following:. Trolley capacity 2. Model number on
More informationSix-point sockets. 1/4" Square Drive Sockets /8" Square Drive Sockets /2" Square Drive Sockets /4" Square Drive Sockets 18-21
1 Six-point sockets 1/4" Square Drive Sockets 08-09 3/8" Square Drive Sockets 10-11 1/2" Square Drive Sockets 12-17 3/4" Square Drive Sockets 18-21 1" Square Drive Sockets 22-26 1-1/2" Square Drive Sockets
More informationENGINE 1. ydrax3. Ref No.
A ENGINE JR-900-00-00 A ENGINE ASSEMBLY CYLINDER HEAD JT0--00-00 HEAD, CYLINDER JN--0-00..GUIDE, VALVE JT0--00-00 GASKET, CYLINDER HEAD 90-000-00 BOLT 900-00-00 WASHER, PLATE 990-0-00 PIN, DOWEL 9-0-00
More informationB E A R I N G S A N D C OM P O N E N T S
Issue Feb 2017 B E A R I N G S A N D C OM P O N E N T S See also: Bowman Sintered Bearings Catalogue Tel +44 (0)1235 462500 Fax +44 (0)1235 462519 E-mail sales@bowman.co.uk Contents Page Company Profile
More informationTORQUE LIMITER SERIES 200
TORQUE LIMITER SERIES 200 Quality and Autogard are synonymous with overload protection. The company's reputation for high quality products is derived from over 40 years of design innovation and production.
More informationHBM-4 CNC Horizontal Borer
HBM-4 CNC Horizontal Borer August 27 CNC Horizontal ROTARY TABLE Heavy loading capacity Auger chip remover High accuracy: 3 pieces flat type clutch for position index provides high accuracy & long durability.
More informationNumatic International Spare Parts Model No: Numatic International Spare Parts Model No: NB: FOR WIRING SEE DRAWING: DRW-7279
TTB 0 BASE ASSEMBLY EXPLODED DRAWING NB: FOR WIRING SEE DRAWING: DRW- 0 0 0 0 0 0 0 0 0 0 0 DRAWING: DRW-0 ISS:A0 /0/0 0 TTB 0 BASE ASSEMBLY EXPLODED DRAWING TTB 0 CHASSIS WELDED ASSEMBLY 0 TTB 0 HANDLE
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
More informationLIFTKET wire rope winch with wall bracket or foot support
Issue August 2014 Spare part list LIFTKET wire rope winch LSF 175/1-19 LSF 200/1-15 LIFTKET wire rope winch with wall bracket or foot support SP-Code Description Description of spare part section Page
More informationSPARE PARTS LIST CHAIN SAWS GZ381
SPARE PARTS LIST CHAIN SAWS ACCESSORIES ACCESSORIES Ref Part No Description Remark QTY KIT 1 501 69 17-01 COMBINATION WRENCH 1 CARBURETOR CARBURETOR Ref Part No Description Remark QTY KIT 1 506 45 05-01
More informationSpare parts list. Rammer MS Valid from serial number MS mm, (11 in.)
Spare parts list Rammer MS 695 Valid from serial number MS 695 280 mm, (11 in.) BGF000001 www.cp.com MS 695 Spare parts list General information This spare parts list applies to the following: Part number
More informationElectric Screwdrivers and Power Supply Operation Manuals
Electric Screwdrivers and Power Supply Operation Manuals (February, 08) Clutch Type Torque Auto Control CL-Series SS-Series CL-000, CL-3000, CL-4000, CL-6000, CL-6500 and CL-7000 (NL-Series and Push-to-Start
More informationIECEx Certificate of Conformity
Certificate of Conformity: IECEx BAS 07.0033X http://iecex.iec.ch/iecex/iecexweb.nsf/fc034777969a786bc1256d42005bd791/9e9052... Page 1 of 4 18/06/2008 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL
More informationParts catalogue LAWN MOWER
OREC ISSUED NO. GRH537PRO-01 Parts catalogue LAWN MOWER (EXPORT MODEL) GRH537Pro(2Action) MODEL GRH537PRO CODE 0269- CONTENTS TRANSMISSION ----------------------------- 1 SAFETY COVER -----------------------------
More informationComponents for Machine Building. Power Feed Units
Components for Machine Building Power Feed Units Standard and Custom Components to Fit Your Needs Exactly If you re building equipment to drill, tap, chamfer or thread, Hause Machines can help you create
More informationLocal solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More informationAF0465-XX SERVICE KITS GENERAL DESCRIPTION MODEL DESCRIPTION CHART OPERATING AND SAFETY PRECAUTIONS THIS MANUAL COVERS THE FOLLOWING MODELS
OPERATOR S MANUAL INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST, DISASSEMBLY & REASSEMBLY. 4-1/4 AIR MOTORS AF044X-XX (4 STROKE) and AF046X-XX (6 STROKE) Also covers 637489 service kits AF044X-XX
More informationTH200-4R (MW9) Note: Not all items are available for all transmissions
TH200-4R (MW9) A B C D E Deluxe Kit---------------------------------- 008 Compliance Kit ------------------------ 007 Master Kit -------------------------------- 006 Less Steel Kit --------------------------
More informationSPARE PARTS LIST. CHAIN SAWS 135 from
SPARE PARTS LIST CHAIN SAWS 135 from 2011-08 - ACCESSORIES 135 from 2011-08 - ACCESSORIES 135 from 2011-08 - Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL Tool 1 CARBURETOR 135 from 2011-08
More informationCONTINENTAL ENGINE PARTS Tel: Fax: CONTINENTAL ENGINE PARTS: F226/F227
CONTINENTAL ENGINE PARTS Tel: 713-864-7084 Fax: 713-864-5190 CONTINENTAL ENGINE PARTS: F226/F227 BORE: 3.3125" 6 Cyl Gas NOTES: Flat Head Engine / Listing Also Includes F6226, PF226 Engine Models APPLICATION:
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationSPARE PARTS LIST. CHAIN SAWS 435 E from
SPARE PARTS LIST CHAIN SAWS 435 E from 2011-05- ACCESSORIES 435 E from 2011-05- ACCESSORIES 435 E from 2011-05- Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 CARBURETOR 435 E from 2011-05-
More informationENGINE 1. ydrax3_ptv. Ref No.
ydrax_ptv A ENGINE ydrax_ptv JC0-900-0-00 A ENGINE ASSEMBLY CYLINDER HEAD JT0--00-00 HEAD, CYLINDER JN--0-00..GUIDE, VALVE JT0--00-00 GASKET, CYLINDER HEAD 90-000-00 BOLT 900-00-00 WASHER, PLATE 990-0-00
More informationKHC-600D 9 Parts list 9.1 Distributor unit
KHC-600D 8.2 Assembly drawing figure 8-2 1 40 41 8 KHC-600D 9 Parts list 9.1 Distributor unit 28 4 31 22 32 14 10 2 21 33 26 46 35 14 43 11 23 36 42 29 5 45 25 23 17 27 14 24 47 6 37 3 34 19 20 18 30 37
More informationELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES
EFFECTIVE: October 21, 2011 ELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES 2 Ton through 20 Ton Capacity Hoist Code and Serial Number This equipment should not be installed, operated or maintained by
More informationGenuine Metaris Gear Product Technical Catalog. Pumps & Components - MH Series Bearing & Bushing Style
Genuine Metaris Gear Product Technical Catalog Pumps & Components - MH Series Bearing & Bushing Style www.metaris.com MH365 Series Bushing Pump Features Metaris Bushing Pumps & Motors are available in
More informationTA 65. Spare parts list. Rammer. Valid from serial number. Rammer TA mm (11 in.)
TA 65 Spare parts list Rammer Rammer TA 65 280 mm (11 in.) Valid from serial number BGF000001 2015 Construction Tools EOOD No. 9800 1719 01 2015-04-01 Original instructions TA 65 Spare parts list General
More informationGN 23. Stainless Steel-Levelling feet
GN 23 Stainless Steel-Levelling feet technical informations Specification Type (Base plate) - Type D0: fine turned, without rubber underlay - Type D1: fine turned, with rubber underlay, inlaid, black Version
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationHigh Pressure Rotating Arch Parts List Jan. 12, 2017 Rev. A
46-804-00-BK Rotating High Pressure Arch with Turbo Nozzles 46-805-00-BK High Pressure Rotating Arch Rotating High Pressure Arch with V-Jet Nozzles 46-806-00-BK Rotating High Pressure Arch with Wheel Blaster
More informationREAR ARM & SUSPENSION
ydrex_ptv A REAR ARM & SUSPENSION ydrex_ptv JW-F0--00 REAR ARM COMP. JN-F-0-00 BUSH 900-00-00 9079-00-00 NUT 970-000-00 BOLT 990-000-00 WASHER, SPRING 7 990-000-00 WASHER, PLATE JN-F-0-00 BUSH 9 9-0-00
More informationLithium-ion Battery UN38.3 Test Report
Lithium-ion Battery UN38.3 Test Report Recommendations on the TRANSPORT OF DANGEROUS GOODS (Manual of Tests and Criteria, Fifth revised edition, Amend.2) Customer: Lenovo Model: ASM P/N SB10K97570 Model:
More informationField Variable Area Flowmeters BFP Global Purgemaster
Data Sheet IT Field Variable Area Flowmeters BFP Global Purgemaster 10A6100 n High Strength Stainless Steel Body - Rigid construction to maintain tube alignment and resistance to pipe strain. n "Snap-in"
More informationNTT CENTRIFUGAL PUMPS TO EN733 (DIN 24255) FOR HEAT TRANSFER OILS UP TO 350 C
FOR HEAT TRANSFER OILS UP TO 350 C WE HAVE ALL THE TICKS Version 1 - NTT: Rapid Allweiler Pumps Whilst all care has been taken to ensure the accuracy of the information contained in this brochure was correct
More informationStainless Conveyor Drive.
Stainless Conveyor Drive UNIQUE, POWERFUL PERFORMANCE Bronze Output Shaft Bushing Safety Cover Safety Cover WashTite Shield Bronze Intput Shaft Bushing WashTite Shield Torque Arm Bracket Solid Stainless
More informationInstallation, Operation and Maintenance of Airflex Model AA2, B2, B3 and C2 Rotorseals
RS 9010 Warning Forward this manual to the person responsible for Installation, Operation and Maintenance of the product described herein. Without access to this information, faulty Installation, Operation
More informationNSK Standard Ball Screws High Speed SS Series
NSK Standard Ball Screws igh Speed SS Series NSK s high speed and low noise ball screws provide high-level performance for drive systems of industrial machines such as those used in manufacturing. standard
More informationFlanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
More informationRECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)
More informationVTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings
VTR Series Track Assembly V-Grooved Type Concentric Ball & Tapered Bearings VTR-3.50E A B C D F FL G H P SD SL T Type Track Width Groove Center Hex Point Shoulder Shoulder Width + Shoulder VTR-1.50 1.50
More information