Build your own THUNDERBIRD 2
|
|
- Godfrey Taylor
- 5 years ago
- Views:
Transcription
1 PACK 12
2 STAGE PAGE 74 Tailwing ramjets and Cobra Half-track Tailwing intakes Tailwing fins T2 control board T2 wings and Mobile Crane T2 side frames and Mobile Crane Complete your Thunderbird 2! 264 Troubleshooting guide 267 Editorial and design by Continuo Creative, North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE.. Published in the USA by De Agostini Publishing USA, Inc., 121 E. Calhoun Street, Woodstock, IL All rights reserved 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary from those shown.
3 STAGE 74 TAILWING RAMJETS YOUR PARTS Tools and materials: Superglue + COBRA HALF-TRACK Tailwing lower Backing R Backing L Ramjet covers x 4 Backings C x Front Familiarise yourself with the lower 02 tailwing part. The left and right backings are marked with an L and an R. Back Glue one of the ramjet covers to the right backing, like this. Repeat for the left backing. Now do the same for the central (C) backings like this. 247
4 Back Find these downward-facing hooks on the backings. Front Glue the right ramjet and backing to these notches at the right-rear of the lower tailwing. The backing s hooks will hold it in position, like this. Glue the central parts here and here. Then glue the left one in place. All four should look like this. STAGE COMPLETE COBRA HALF-TRACK Tools and materials: Superglue, tweezers Headlights Windscreen Searchlights x 2 Canopy Seat Bulkhead Dashboard Steering wheel Roll cage Jerry cans x 2 Canvas packs x 2 Bonnet rails x 2 Planks x Glue the steering wheel to the dashboard. All details will be glued. It should be level, like this. Now glue the dashboard to the main body. The seat goes here. 248
5 The bulkhead sits just behind the seat. These parts should be level with each other, like this. The roll cage fits here like this Fit the headlights like this. Fit the first bonnet rail to these holes. It should be level Repeat for the other side. Glue the windscreen here. Now fit one searchlight here and the other one next to it Fit the canvas packs to both sets of planks. Glue one of the two jerry cans here with the pack/plank assembly behind it. They should sit like this STAGE COMPLETE Repeat for the other side. Finally, glue the canopy to these holes. The assembly is complete. 249
6 STAGE 75 TAILWING INTAKES YOUR PARTS Tools and materials: Superglue Tailwing upper Intake fins x 48 Intake R Intake L Intakes C x 2 Screws x 7 01 Front Familiarise yourself with the upper tailwing part. 02 Locate the R and L marks on the right and left intakes. Back 03 Carefully separate the fins from the sprues. These will be glued into the intakes vertical grooves, via their central pins (arrow). 04 This is what each fin will look like. This is the right intake. 250
7 05 Keep fitting the fins until 11 are fitted, like this Now begin adding fins to the left intake, in the same way. Keep adding the fins until again there are 11 in position Now repeat for the first of the central (C) intakes. Eleven fins will fit like this. Repeat for the other central intake, and 11 more fins. 13 Again, there are hooks to hold 14 the intakes. Front Glue the right intake to these notches on the lower tailwing part, assembled in the previous stage. 251
8 15 The intake will sit like this. 16 Glue the first central intake next to the right one And then the other one next to that. The left intake will fit here. The intakes should look like this Lower this stage s upper tailwing part onto the lower one, matching the arrowed mounting posts and holes. The parts should join neatly, like this. Fit a screw here, and tighten lightly STAGE COMPLETE Fit the rest of the screws in this order, tightening each lightly at first. Now tighten all the screws fully. 252
9 STAGE 76 TAILWING FINS YOUR PARTS Tools and materials: Superglue Duct L Duct R Tailwing fin L Tailwing fin R Note the L and R markings on the insides of the ducts. Slot the tailwing s side block into this slot in the left tailwing fin. It should sit comfortably, like this Front... and be flush with the side of the tailwing, angled down and inwards, as shown. Prepare the left duct. Both ducts are thinner at the front end. 253 Fit the duct over the protruding tailwing block, sealing in the fin. Use a little glue to secure the parts.
10 Make sure the duct is flush with the side of the tailwing. Repeat for the right fin. Again, its side block will locate it And the right duct will secure it, with a little glue to strengthen the hold. The tailwing fins are now complete. STAGE COMPLETE 254
11 STAGE 77 T2 CONTROL BOARD YOUR PARTS Tools and materials: Tweezers, screwdriver Control board Screws x 4 Extension cable (for cockpit LED) In this stage, you will need your model s cockpit and nose assembly. Locate the LED s yellow cable, and position its connector with its barb pointing upwards. Fit this connector into the socket end on this stage s extension cable. The barbs will fit into the corresponding slots, securing the join. 04 Check that the cables are firmly 05 connected. The cockpit is now ready to be wired up. 255
12 Make sure there are no batteries in your model s battery box, and that the switch is in the OFF position. You will now remove the test board: begin by using tweezers to carefully pull this cable s connector out from its socket like this Do the same for all the cables connectors. Now remove the three screws securing the test board to your model. You are now ready to fit the control board. Motor socket Upper-limit switch (Front) Cockpit LED (headlight) Lower-limit switch Familiarise yourself with the final control board. The sockets have descriptions printed next to them, and are also annotated in the photo shown here. Left booster LED (taillight) Battery box (power) Right booster LED (taillight) Main switch Booster speaker 12 Lay the control board out where the test board was, noting which side the front of the board is. Fit one of this stage s screws into this hole and tighten it. 13 Fit two more of the screws to secure the board. 256
13 Fit the main switch cable s connector into the socket marked switch. Make sure you select the correct cable, and that it clicks firmly into its socket. Now fit the battery box cable s connector into the socket marked power. Ensure it is fitted securely Now fit the left booster s LED cable into the next socket along, which is marked taillight. Check all three connectors fiited so far are secure. Now fit the legs upper-limit switch cable into the socket marked upper limit Next to this goes the motor s cable. 23 Check all five connectors fitted so far are secure On the right side of the board, fit the right booster s speaker cable (you marked this with tape during the booster assembly) into the socket marked speaker. STAGE COMPLETE The right booster s LED cable will slot in next to it. The legs lower-limit switch cable will fit into the socket marked low limit 257 That completes the wiring up of the control board for now.
14 STAGE 78 T2 WINGS YOUR PARTS Tools and materials: Tweezers + MOBILE CRANE Wing L Wing R Fixing joints x 2 Red and blue wingtip lights Note the L and R markings on the inner edges of the two wings. Fit the red wingtip light to the front tip of the left wing. It will look like this. You do not need to glue this part Now fit the blue light to the tip of the right wing. Do not glue the part. The wings are now complete. 258
15 07 Top Note the shape of the two fixing joints. At the bottom, you will see a T-shaped pin. Fit the first joint to this slot, on the left side of your model. Match the T-shaped pin with its recess. Press the part into place STAGE COMPLETE It should sit neatly in the recess, like this. MOBILE CRANE Tools and materials: Tweezers, superglue Repeat for the right side, again matching the T-shaped pin/recess. The joints are ready. Warning bar Wheel inners x 6 Wheel outers x 6 Bumper Main body Tyres x 12 Axles x Glue a wheel inner to a wheel outer, like this. Repeat for all the wheel inners and outers. Now glue one wheel set to the central recess in a tyre like this. Repeat for all six wheel sets. 259
16 Now begin fitting another tyre to each of the six wheel/tyre sets so all six are prepared. Fit one set to an axle tip. Repeat for the remaining two axles. 09 The main body came preassembled, but if you need to, glue its parts together via these posts. 10 Fit the first axle here Seal it in with a free wheel set. Press these together then repeat for the others. 14 Top Note the shape of the warning bar and bumper. 15 Glue the bumper here, making sure it is the right way up. Top 16 Then fit the warning bar to it. STAGE COMPLETE 260
17 STAGE 79 T2 SIDE FRAMES YOUR PARTS + MOBILE CRANE Side frame R Side frame L Screws x Temporarily disconnect the LED extension cable from the cockpit s LED cable. 04 Now fit its connector to the free socket on the control board, marked headlight. 05 Run the extension cable along the left inside of your model, clipping it between these pins as you do. 06 Keep going until the cable is fitted neatly, like this. 07 Go back and check all the pins are holding the cable safely in place. 08 If the cable still lifts at all, secure with a few bits of tape. Use a low-tack masking tape for this. 09 With the cockpit/nose asembly face down, line up the right side frame. Position the parts like this. Turn the side frame as you join the parts, so its mounting lug (circled, left photo) sits on top of the cockpit s smaller one (circled, right photo). 261 Secure the lugs with a screw.
18 10 11 Build your own STAGE COMPLETE Make sure the join is neat, and that the contours of the parts match. Repeat for the left side frame. MOBILE CRANE Tools and materials: Tweezers, superglue Front unit Cockpit Light mount Crane arm A Hydraulic bar Crane base Intake Crane mount Searchlight Pivot A Hinge pin Crane arm B Pivot B Aerial Intake base Headlights x 2 Nameplates x 2 Platform base Handrail The hydraulic bar will adhere to these holes on the crane arm B. Now slot the tip of crane arm A into the hinge of arm B (arrowed). Do not glue these parts. Use tweezers to fit the hinge pin into the hole joining the arms. Press the pin into place with the back of the tweezers. Again, do not glue these parts. Now glue the platform base to the end of the crane arm A, via its pins. From this point, all details will be glued Front The handrail completes the platform assembly. This photo shows the handrail s correct orientation. Now glue the intake to the intake base. 262 Glue the pivot B to pivot A, like this.
19 Glue the front unit to the forward section of the main body. The crane mount will sit behind it. The cockpit fits here, facing forwards The crane base will clip into place here. The intake assembly will fit here, pointing forwards. The nameplates will fit in these holes, facing outwards. Fit both Glue the pivots to these holes and this slot. 18 Now clip the crane itself into its base. 19 The pin at the top of the pivots will locate and hold the crane s upper length. Glue these parts. 20 The headlights go here, so fit both now. The light mount will sit in this hole with the searchlight in the mount s hole STAGE COMPLETE Check that the angle of the searchlight and its mount are as shown above. The aerial fits next to the searchlight. 263
20 STAGE 80 Build your own COMPLETE YOUR YOUR PARTS Tools and materials: Superglue, screwdriver, towel/soft cloth! Rear body panel Controller face Joint plate Light block Controller body A-B buttons C-D buttons Medium screws x 3 Large screws x 18 Small screws x Join the rear body panel to the back of the side frames, via the arrowed posts. There should be no gaps. Turn the assembly over and secure the posts with two of the large screws Both should be securely tightened The rear panel is complete. Reconnect the cockpit LED cable to the extension cable. Then lower the upper body onto the lower body gently. Make sure the missile launcher spring and its tube engage neatly. Temporarily fasten the upper and lower parts with bits of masking tape. 264
21 Lay your model gently on a towel or soft cloth, face down, then tighten another larger screw into this hole. 12 Now work around all of the circled holes, in a random, criss-crossing order as you have previously, to ensure even pressure is achieved. 13 Tighten each screw fully, then place your model back the right way up. 14 Take the assembled right wing (with T2 insignia and blue light) and glue it into the right-side slot. 15 The wing should fit neatly, pointing forwards, like this. 16 Repeat for the left wing. 17 It, too, should point forward. Next, slot the fins of the tailwing into these longitudinal slots. You just have to fit either Pod 3 or 4, and your model is complete! All that s left to do is prepare the remote control Top Begin this process by slotting the joint plate into place on the controller body. Note its orientation (inset). Make sure the part is seated correctly. 265 Now fit the light block into this hole, in the controller face.
22 Secure this with a small screw. The A-B buttons will sit in the arrowed holes, without glue. Check the front side of the face to ensure that they are positioned like this. The C-D buttons fit here, without glue The four buttons should look like this from the front. 29 Making sure the plate remains in position, join the controller body to the face, like this. Secure it with a medium screw. Repeat for the opposite hole. YOUR RESCUE COLLECTION IS NOW COMPLETE! The controller is complete. It will need two AAA batteries. The rest of this page explains how to use the remote. Boosters Button A activates the boosters red lighting and engine sound effects. Missile launcher The missile launcher is operated manually: slide the hatch back and the missile launcher will spring up through the hole. Pods The pods are not physically attached to the T2 body frame, so when handling the model, use two hands to clasp both the body and the pod. 266 Using the controller Button A: Booster LEDs and engine sound. Button B: Cockpit LED. Button C: Extend telescopic legs (to raise T2). Button D: Retract telescopic legs (to lower T2). Note: There is no ON/OFF switch on the controller, so remove the batteries when not in use.
23 TROUBLESHOOTING GUIDE PROBLEMS WITH THE CONTROLLER Check the batteries If none of the buttons respond Check that the main switch on your T2 model is OFF. Insert three new AA batteries to the battery box, ensuring they are facing in the correct direction. Remove the 15 screws that connect the top and bottom sections of the main body panels. See Step 10 of Stage 80 (Pack 12). The controller does not have an ON/OFF switch. When buttons A to D are pressed, the controller s LED will light up red, indicating that the unit is functioning. Turn the power ON and check whether the LED on the circuit board lights up. If the LED does not light up, check that the connector at the end of the battery box cable is seated in its socket (arrowed) securely. If the LED does not light up, insert two new AAA batteries, making sure to face them in the correct direction. See Stage 77 (Pack 12). If button A doesn t respond If button B doesn t respond If buttons C & D don t respond If the boosters do not light up when button A is pressed, check that the wires leading from both are linked into their respective sockets securely. Reset their connectors if either is loose. If the cockpit interior LED does not light up when button B is pressed, check the wiring leading from the cockpit to the control board including its extension cable s connector. If the telescopic legs do not extend and/or retract when buttons C and D are pressed, or if the motor at the front of the unit does not function at all, check the motor s wiring and connector. If the engine sound effects cannot be heard when button A is pressed, it is the speaker s cable and connector that should be checked and reset. 267
24 Build your own PROBLEMS WITH THE TELESCOPIC LEGS Your Thunderbird 2 s telescopic legs are powered by the motor at the front of the main body unit, which branches left and right to operate the drive shafts, crown and centre gears, which in turn combine to move the legs rail-gears. If any problems occur, follow the steps found on this page. Check the centre gear and rail-gear racks teeth/notches Check that the notches on the legs rail-gear racks are engaged securely with the teeth of their centre gear, at all four points of contact. Adjust both rail-gear racks at the same time if anything is amiss. See Steps 1 11 in Stage 46 (Pack 08). Check the rail-gear racks and inner springs Check that each of the four rail-gear racks are correctly attached to their inner springs. This is especially important for the right-side racks, as these were removed and reinstalled in Stage 45. See Stage 45 (Pack 07). Check the limit switches Check the motor unit installation The raising of your T2 model on its telescopic legs is determined by the upper-limit switch, fitted to the slide rail. If there is a problem with this operation, check the upper-limit switch s wiring and connectors now. See Step 19 in Stage 44 (Pack 07). Similarly, the lowering operation is controlled by the lower-limit switch, so if this is the problem check this component s wiring and connectors. See Step 20 in Stage 45 (Pack 07). Check the guide pins It is possible that the guide pins may have come loose during the assembly, which can affect the smooth operation of the legs. It is a good idea to check that all four of the guide pins fitted are still securely in place. See Stages 44 and 45 (Pack 07). Check the gears and drive shaft installation The connection between the gears that carry the power from the motor unit to the legs themselves must be properly engaged to ensure smooth operation. Check that the crown gears, pinion gears and drive shafts connecting the motor unit and gearbox are all correctly installed. A fault with the motor, for example if it is loosely fitted, will prevent the legs moving as intended, so go back and check that the motor unit is tightened securely with three screws. See Step 06 in Stage 43 (Pack 07). Check the slide rails Check that the right and left slide rails are tightened securely with all six screws, as any looseness in these parts will affect the legs operation. See Stages (Packs 06 & 07). See Stages 44 and 45 (Pack 07). 268
Build your own THUNDERBIRD 2
PACK 11 PAGE 67 Pod 4 ramp tracks and Jet Air Transporter 224 68 Left rear booster and Alan s Racing Car 227 69 Right rear booster and Alan s Racing Car 230 70 Left booster speaker 233 71 Right rear booster
More informationBuild your own THUNDERBIRD 2
PACK 03 PAGE 12 Pod 3 front hatch and Elevator Car 2 43 13 Pod 3 rear hatch and Elevator Car 2 46 14 Pod 3 floor and Elevator Car 2 49 15 Pod 3 frames and FAB 1 52 16 Pod 3 frames and FAB 1 55 17 Pod 3
More informationBuild your own THUNDERBIRD 2
PACK 04 PAGE 19 Pod 3 base 66 20 Pod 3 details and Firefly 69 21 Pod 3 laboratory and Firefly 72 22 Pod 3 floor details and Firefly 75 23 Pod 3 inspection walkways 78 24 Pod 3 right inner wall 81 25 Pod
More informationBuild your own THUNDERBIRD 2
PACK 06 PAGE 33 Telescopic legs C and I.R.3 112 34 Telescopic legs D and I.R.3 115 35 Leg bases and Thunderizer 118 36 Landing feet and Elevator Car 3 121 37 Leg rail-gear racks and Elevator Car 3 124
More informationBuild your own THUNDERBIRD 2
PACK 01 STAGE PAGE 01 Nose assembly and Elevator Car rear wheels 3 02 Cockpit interior and Elevator Car 1 completion 7 03 Missile launcher and Thunderbird 4 11 04 Nose assembly and the Tracy brothers 15
More informationThe front wheel and mirror
Pack 01 1 The fuel tank 3 2 The front wheel and mirror 5 3 The headlight 6 Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea
More informationBuild the legendary PORSCHE RS 2.7. Pack 12
Build the legendary PORSCHE RS 2.7 Pack 12 Build the legendary P O R S C H E RS 2.7 Contents PAGE STAGE 92 The rear shelf 368 93 The engine cover 372 94 The engine cover hinges 376 95 The rear panel 380
More informationBuild the. Steam Locomotive. Pack 01
Build the Steam Locomotive Pack 01 Build the Steam Locomotive Contents Step by step Stage 01: The smokebox door Stage 02: The smokebox Stage 03: The first driving wheels and coupling rods Stage 04: The
More informationBuild the legendary PORSCHE RS 2.7. Pack 5
Build the legendary PORSCHE RS 2.7 Pack 5 Build the legendary P O R S C H E RS 2.7 Contents PAGE STAGE 29 Rear disc brake 120 30 Rear wheel 123 31 Rear disc brake 126 32 Rear wheel 129 33 The crankcase
More informationBUILD YOUR OWN. Pack 16
BUILD YOUR OWN TM Pack 6 0 CONTENTS Assembly Guide 43 Stage 5: The left fuel tank base Stage 5: The engine cables Stage 53: The LED tester Editorial and design by Continuo Creative, 39-4 North Road, London
More informationBuild the legendary PORSCHE RS 2.7. Pack 3
Build the legendary PORSCHE RS 2.7 Pack 3 Build the legendary P O R S C H E RS 2.7 Contents PAGE STAGE 13 The rear engine cover 55 14 The left intake manifolds and throttle bodies 59 15 The right intake
More information3D PRINTER. Pack 09. Anything you can imagine, you can make! 3D technology is now available for you at home! BUILD YOUR OWN
BUILD YOUR OWN Pack 09 Anything you can imagine, you can make! 3D PRINTER Compatible with Windows 7 & 8 Mac OS X 3D technology is now available for you at home! www.model-space.com BUILD YOUR OWN 3D PRINTER
More informationBuild your own. Pack. Stages 39-42: Receive more of Robi s electrical components
Build your own Pack 11 Stages 39-42: Receive more of Robi s electrical components Build your own All rights reserved 2016 CONTENTS Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne
More information3D PRINTER. Pack 10. Anything you can imagine, you can make! 3D technology is now available for you at home! BUILD YOUR OWN
BUILD YOUR OWN Pack 10 Anything you can imagine, you can make! 3D PRINTER Compatible with Windows 7 & 8 Mac OS X 3D technology is now available for you at home! BUILD YOUR OWN 3D PRINTER CONTENTS PACK
More informationBROOKS STAIRLIFTS SUPERGLIDE 120
BROOKS STAIRLIFTS SUPERGLIDE 120 INSTALLATION PROCEDURES CONTENTS Health And Safety Hazards 3 Unpacking the Stairlift Carriage 4 Pre-Installation Procedure 5 Box Contents 6 Installation Tools 9 1.1 Required
More informationFabric Studio Custom Roll Shades Installation Instructions
Fabric Studio Custom Roll Shades Installation Instructions Cassette System Battery Motor Lifting System Inside or Outside Mount Thank you for purchasing your new roll shade. It has been custom-made from
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 24642 BODY SIDE CLADDING 2003 CR-V P/N 08P21-S9A-100 Issue Date OCT 2002 PARTS LIST Right rear bumper piece Right front fender piece
More informationPrusa i3 Printer Assembly Guide
Prusa i3 Printer Assembly Guide Special thanks to Carlos Sanchez and Miguel Sanchez for the graphics. All graphics captured from their great animation: http://www.carlos-sanchez.com/ Prusa3/ For copyright
More informationThe H-MAC Heavy Metal Articulating Chassis Construction Guide
The H-MAC Heavy Metal Articulating Chassis Construction Guide The Heavy Metal Chassis is constructed with two identical drive modules built using 10 mechanical sub-assemblies. The drive modules are integrated
More informationInstallation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3
Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage
More informationOne- Touch Installation Instructions
One- Touch Installation Instructions 1 1 Height Adjustable Pivot w/ screws 9 Upper Work Surface 2 Rail Mount Knobs 10 Back Cover 3 Transformer 11 Center Pivot w/ screws 4 Support Legs 12 Left Monitor Arm
More informationWARNING. When installed in accordance with these instructions, the front protection bar does not affect operation of the SRS airbag.
Part Number: 343870 F/Kit 17557 Product Deluxe Combination Winch and Non Winch Bull Bar Description: Suited to Nissan XTERRA 05ON USA Only vehicle/s: WARNING REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
More informationINSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 33173 UNDER 2007 ODYSSEY Issue Date JULY 2006 PART LIST Front under spoiler 5 Stepped bolts TOOLS AND SUPPLIES REQUIRED Phillips screwdriver
More informationHow to fold your MGB top (pre 1970 pack away top & frame)
How to fold your MGB top (pre 1970 pack away top & frame) It is most important that the instructions given for raising, lowering and folding the hood are followed. Do not use undue force on the hood frame-members.
More informationQ15P. Mitsubishi MQ Triton Dual Cab
Mitsubishi MQ Triton Dual Cab Page 1 of 12 Fitting Instructions Part Number Mitsubishi MQ Triton Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies
More informationRS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR JEEP WRANGLER ALL MODELS.
RS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR 2007-2016 JEEP WRANGLER ALL MODELS. Rear Bumper Installation Instructions 1) Remove factory rear bumper, (this includes all tow hitch
More informationInstruction Manual UK
Instruction Manual UK Product: Monterey2 child booster seat Model: 15000 Mfg. by: DIONO Unit D Ventura House Ventura Park Road Tamworth Staffs B78 3LZ UK CUSTOMER SERVICE Tel: 0845.300.9071 Email: dionouk@diono.com
More informationInstallation instructions, accessories RTI S80
Installation instructions, accessories Instruction No 8685714 Version 1.0 5 Part. No. RTI S80 Volvo Car Corporation RTI S80-8685714 - V1.0 Page 1 / 25 Equipment A0000161 A0000162 A0801178 D8802049 Page
More informationInstallation Instructions for 2018 Jeep Grand Cherokee Laredo & Altitude and 2018 Dodge Durango SXT & SXT Plus
Thank you for purchasing the SmartStopStart module! Please read this important information and keep this document with your vehicle owner's manual. Installation Instructions for 2018 Jeep Grand Cherokee
More informationINSTALLATION & OWNER S MANUAL
Rev. B, p. 1 of 25 INSTALLATION & OWNER S MANUAL POLARIS RANGER RCS (for models XP or HD) (for model years 2009-) cab without doors kit (p/n 1POLRCWD) cab with doors kit (p/n 1POLRC) doors only kit (p/n
More informationWildcat System Instructions
Wildcat System Instructions NOTE: Most steps contained in these instructions will need to be repeated on the other side of the vehicle. Prior to assembly of windshield it is necessary to establish what
More informationMaintenance Information
45528270 Edition 1 June 2007 Barring Motor T480 Series Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing maintenance on this Barring Motor.
More informationLexus NX Fine Mesh and Dynamic Radar Cruise Control Fine Mesh Grilles
IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2015-16 Lexus NX Fine Mesh and Dynamic Radar Cruise Control Fine Mesh Grilles Upper Insert - factory chrome surround and emblem reused
More informationLPE C5 Battery Relocation Kit
LPE C5 Battery Relocation Kit The LPE C5 Corvette battery relocation kit improves vehicle weight distribution by moving weight to the rear of the vehicle. The improved weight distribution increases traction
More informationSCION FR-S FOG LIGHTS
Part #: PT413-18130 Conflicts: Lowering Springs PTR07-18130-LL (California only) Kit Contents: For Anniversary Edition, Monogram & RS 2.0 vehicles, additional parts need to be ordered (PT413-18130-LL)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 44415 2011 CIVIC 4-DOOR Issue Date AUG 2010 PARTS LIST Trunk spoiler 2 Cap nuts 2 Screws Left trunk spring (marked yellow) Right trunk
More informationAmTryke Adult Recumbent Model JT2000 #50-FC-2000
AmTryke Adult Recumbent Model JT2000 #50-FC-2000 TOOLS Needed for Assembly 5 mm Allen Wrench 8 mm Socket or Wrench 10 mm Socket or Wrench 14 mm Socket or Wrench 15 mm Socket or Wrench 22 mm Socket or Adjustable
More informationLexus ES Fine Mesh and Adaptive Cruise Control Fine Mesh Grilles Upper and Lower Replacements
IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2013-15 Lexus ES Fine Mesh and Adaptive Cruise Control Fine Mesh Grilles Upper and Lower Replacements Part #1372-0102-13 / Black Ice
More informationAssembly Manual. 1/10th Formula 1 Car
Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp
More informationKK-K9-F16-K INSTALLATION INSTRUCTIONS K9 Kit for FORD EXPLORER (Retail Model Vehicle with OEM Center Shifter Console)
KK-K9-F16-K INSTALLATION INSTRUCTIONS K9 Kit for 2011-2016 FORD EXPLORER (Retail Model Vehicle with OEM Center Shifter Console) TOOLS Needed: Phillips Screw Driver Power Drill with Drill Bits Trim panel
More informationAmTryke Adult Recumbent Model HP1000 #50-HC-1000
AmTryke Adult Recumbent Model HP1000 #50-HC-1000 TOOLS Needed for Assembly 5 mm Allen Wrench 8 mm Socket or Wrench 10 mm Socket or Wrench 14 mm Socket or Wrench 15 mm Socket or Wrench 22 mm Socket or Adjustable
More informationTOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
More informationInstallation Instructions Camaro ZL1 ( Z) ( ZB)
Installation Instructions Camaro ZL1 (501-1099-10-Z) (501-1099-10-ZB) Parts List 1 Insulated Air Box \ Lid 1 Thermal Coated Intake Tube / MAF Housing with (2) M4 x.7 thread 8mm long Stainless Screws; 1
More informationDM-ST (English) Dealer's Manual. Dual control lever ST-9001 ST-9000 ST-6800 ST-5800 ST-4700 ST-4703
(English) DM-ST0002-05 Dealer's Manual Dual control lever ST-9001 ST-9000 ST-6800 ST-5800 ST-4700 ST-4703 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY... 4 INSTALLATION... 6 List of tools to be used...6
More informationForge Motorsport BMW N54 Diverter Valves
Forge Motorsport BMW N54 Diverter Valves Please thoroughly read through and familiarize yourself with these instructions in their entirety prior to beginning any part of the installation process of any
More informationInstallation Instructions : Audi C7 RS6 Intake System : Page 1
Installation Instructions : Audi C7 RS6 Intake System : Page 1 1. Remove Engine cover and loosen the clamps around the inlet hoses of the airbox. 2. Pull the hoses away from the turbo tubes. 3. Release
More informationUse and Care Instructions: Youngman Telescopic Loft Ladder. Models: 2.6m and 2.9m. Safety
Use and Care Instructions: Youngman Telescopic Loft Ladder Models: 2.6m and 2.9m Safety Please ensure you read the Safety section in this manual starting on page 4 before installing or using the equipment.
More informationInstallation Instructions :BMW E39 M5 : Page 1
Installation Instructions :BMW E39 M5 : Page 1 1. We will start by removing the front bumper. Remove the 3 x 8mm hex head bolts in the wheel arch liners on both sides. Turn the wheels to gain access. 2.
More informationInstallation Instructions
L-PB L-PW Installation Instructions Component Checklist Arm Assembly (with pre-assembled Desk Clamp) Hardware Desk Single Rotation Limiter (x1) (x1) 2mm Allen (x1) Cable Clip (x4) Spacer Bush (x4) Fasteners
More informationStair Lift SL600 INSTALLATION MANUAL
Stair Lift SL600 INSTALLATION MANUAL ATTENTION! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS is required and will promote the safety of those installing this product, as well as those who will ultimately
More informationInstallation instructions, accessories - Fuel driven heater 912-D
XC90 Section Group Weight(Kg/Pounds) Year Month 8 87 2002 10 XC90 2003 D5244T, XC90 2004 D5244T, XC90 2005 D5244T AW50/51 AWD, XC90 2006 D5244T, XC90 2006 D5244T AW50/51 AWD D5244T R8703687 Page 1 of 20
More informationBag 1. Bag 1. Center Pivot. Center Pivot
8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball
More informationCurrent Range Rover Sport STRUT Collection Installation Manual
2014 - Current Range Rover Sport STRUT Collection Installation Manual 1 1. Removing Main Grille and Lower Fascia 1.1 Run a line of low tack masking tape across the front of the bumper below the grille
More informationiphone 5s Front Panel Replacement
iphone 5s Front Panel Replacement Replace the cracked or broken screen on your iphone 5s. Note: DIY at your own risk. New beginner must be careful, screens got problems mostly due to wrong installation
More informationCOLD AIR INTAKE INSTALLATION INSTRUCTIONS
COLD AIR INTAKE INSTALLATION INSTRUCTIONS # D760-0030 Fits: 2007-10 135i (E82, E88; with N54 engine) 2007-08 335i/xi (E90) 2007-10 335i (E92, E93; with N54 engine) Congratulations for being selective enough
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 27176 2005 CR-V Issue Date P/N 08V31-S9A-114 SEP 2004 PARTS LIST 25 Wire ties Left fog light 6 Washer-bolts Right fog light 6 Spring
More informationBow Extension Cylinders
Bow Extension Cylinders Level of difficulty: Fairly easy to intermediate very rewarding! Requires some patience. Tools needed: - 5-mm Allen wrench or socket (only for 90-95 models) - Needle nose pliers
More informationAssembly Instructions
Assembly Instructions Part Number Description Model Approx. Assembly Time 99994-0903 Windshield Wiper Kit Mule SX 1 Hour WARNING Improper installation of this accessory could result in an accident causing
More informationRedlineGoods Tacoma Installation Manual
RedlineGoods 2016+ Tacoma Installation Manual AUTOMATIC SHIFT BOOT AND EBRAKE BOOT Press down on the factory shift boot collar to disconnect it from the shift knob. Unscrew shift knob Pull up on the rear
More informationStair Lift SR601X INSTALLATION MANUAL
Stair Lift SR601X INSTALLATION MANUAL ATTENTION! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS is required and will promote the safety of those installing this product, as well as those who will
More informationINSTALLATION INSTRUCTIONS 97 FORD EXPEDITION
INSTALLATION INSTRUCTIONS 97 FORD EXPEDITION 1. Read the instructions completely and carefully before you begin. Check the kit for proper contents (refer to the part s list and the picture diagrams). Before
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REAR SPOILER Application 2011 CR-Z MUGEN Publications No. AII 45919 Issue Date APRIL 2011 PARTS LIST Right wing bracket Rear wing Left wing bracket Right wing base Right
More informationWH/WK JEEP GRAND CHEROKEE 2005 ON WARNING
Part Number: 3450130 F/KIT: 6172092 Product Description: Suited to vehicle/s: COMBINATION BULL BAR WH/WK JEEP GRAND CHEROKEE 2005 ON WARNING REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG; When installed
More informationH15P. Toyota Hilux A-DECK Dual Cab
Toyota Hilux A-DECK Dual Cab Page 1 of 14 Fitting Instructions Part Number H15 Toyota Hilux A-DECK Dual Cab 2015+ To suit Sports Bars Check contents of kit before commencing fitment and report any discrepancies
More informationSingle Seat Trailer. Owner s manual and safety instructions
Single Seat Trailer Owner s manual and safety instructions Owner s Manual Every effort has been made to ensure your trailer is of top quality and proven safe design, ready to provide you with many years
More informationFord F-150 Billet Grilles Upper Replacement
2015-16 Ford F-150 Billet Grilles Upper Replacement Upper Black Billet Part #1045-019U-15B Upper Polished Billet Part #1045-019U-15 TOOLS REQUIRED Automotive grade masking tape, plastic clip removal tool,
More informationA B C D E F. Tools Required (supplied by others)
Page 1 of 17 Parts List Below Deck Automatic Retractable Security Cover Kit (1) Tube End Bearing Plate (A) (1) Rope Reel and Cover Drum Motor Assembly (B) (1) Cover Drum (1) Pulley Support Channel (2)
More informationSolar & Roller Shades
STEP BY STEP INSTALLATION INSTRUCTIONS Solar & Roller Shades Loop Control, Loop Control with Cassette/2 on 1 Headrail & Loop Control with Metal Valance Table of Contents Step 1 - Getting Started....3 Everything
More informationINSTALLATION INSTRUCTIONS
Accessory Application Publications No. INSTALLATION INSTRUCTIONS SIDE S 2013 TSX BII 13496 Issue Date SEP 2012 PARTS LIST 4 Screws Left side under spoiler Right side under spoiler 2 Clamps TOOLS AND SUPPLIES
More informationREAR INTERIOR AMBIENT LED FITTING INSTRUCTIONS AUDI A4(B6) 2001 onwards
GLUE is required to secure the supplied lighting module into place, and is not included as part of this modification kit. Please read the instructions fully before commencing this modification. NOTE: Ensure
More informationInstallation Instructions : Jaguar F-Type Intake System : Page 1
Installation Instructions : Jaguar F-Type Intake System : Page 1 1. Remove the undertray all the Torx bolts and the hex bolts holding the splitters in place need to be removed. 2. Starting with the right
More information5 Mechanisms and accessories
5 Mechanisms and accessories 51A SIDE OPENING ELEMENT MECHANISMS 52A NON-SIDE OPENING ELEMENT MECHANISMS 54A WINDOWS 55A EXTERIOR PROTECTION 56A EXTERIOR EQUIPMENT 57A INTERIOR EQUIPMENT 59A SAFETY ACCESSORIES
More informationInstallation Guide. Stowe Cargo Management System. Table of Contents
Installation Guide Stowe Cargo Management System Table of Contents 1. Pre-Installation (Page 2) a. Notes, Installation Kit contents & Tools needed 2. How to Install the Stowe Cargo Management System (Pages
More informationFranking system PostBase One Service documentation
Print system Andreas Nagel VST; ServDok_PostBase-One_Kap04_02_printer_system_003eng.docx Revision May, 10th/ 2016 page 1 Chapter 4.2 Printer System 1 MOTORS IN THE PRINTER SYSTEM 3 2 PIVOT ASSEMBLY POSITIONS
More informationFIAT 500 ABARTH FRONT MOUNTED INTERCOOLER INSTALLATION
FIAT 500 ABARTH FRONT MOUNTED INTERCOOLER INSTALLATION Tools needed: T30 screwdriver/bit 10mm socket, suitable extension and ratchet 17mm socket, suitable extension and ratchet 10mm ratchet spanner Pozidriv/Phillips
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory BACKUP S Application 2012 ODYSSEY Publications No. AII 46724 Issue Date SEP 2011 PARTS LIST Backup Sensor Attachment Kit P/N 08V67-TK8-100A Right center sensor clip
More informationMaintenance Information
Form 04584058 Edition 1 November 2004 Air Impactool 2141P and 2141PSP Maintenance Information Save These Instructions Disassembly General Instructions 1. Do not disassemble the tool any further than necessary
More informationSection 5: Parts Replacement
Section 5: Parts Replacement Should the STAR TRAC 4500 Treadmill experience a problem requiring replacement of a specific part, the following procedures will help and instruct in the replacement of major
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. S P/N 08V31-S0X-100 1999-2001 ODYSSEY AII 20677 Issue Date AUG 1999 PARTS LIST 2 Fog lights Switch Fuse label Right bracket Relay B, 4-pin
More informationLIFT Standard A-Arm Lift Kit Club Car Precedent Installation Instructions
LIFT-563 6 Standard A-Arm Lift Kit Club Car Precedent Installation Instructions Contents of LIFT-563 Club Car Precedent Lift Kit: a (1 ea.) Front Suspension b (1 ea.) Driver Side Upper A-Arm c (1 ea.)
More informationInstallation Instructions
Installation Instructions Jeep JK Unlimited (2007 Present) Mounting Bracket and Air Line System Kit for ARB On-Board Twin Air Compressor (CKMTA12) Made in the USA Kit Contents: 1 Bracket for ARB Compressor
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. All 27176-28932 2005 CR-V Issue Date S P/N 08V31-S9A-115 FEB 2005 PARTS LIST 6 Washer-bolts Left fog light 6 Spring nuts Harness bracket
More informationDepress each tab as you pull the bezel off. The bezels are tight. L.H. shown.
2013-2014 Ford Mustang V6 & Boss 302 Lower Valance Fog Light Kit Parts List: Quantity: Tool List: Fog light & bulb with bracket 2 Flat head & Phillips screwdriver Black bezels 2 Ratchet & Socket set OR
More informationmk3 SEAT Ibiza Cupra Front Mount Intercooler.
mk3 SEAT Ibiza Cupra Front Mount Intercooler. Warning be sure not to let any foreign body enter the inlet track of the vehicle whilst the following work is being carried out. Serious engine damage may
More informationINSTALLATION, MAINTENANCE, & SAFETY INSTRUCTIONS
Tarpaulin Systems Flip -N- Go / Quick Mount Flip -N- Go System INSTALLATION, MAINTENANCE, & SAFETY INSTRUCTIONS (800) CRAMARO (800) 272-6276 Plants In: Delaware, Florida, Massachusetts, Nevada, Ohio Install
More informationYour G3 buggy is fitted with three switches on the front part of the body:
CONTENTS Buggy operation... 3 General Maintenance... 5 Technical Maintenance... 6 Front wheel bearing replacement... 6 Rear wheel bearing replacement... 7 Chain replacement... 8 Chain Adjustment... 9 Brake
More informationInstallation instructions, accessories - Rear Seat Entertainment
XC90 Section Group Weight(Kg/Pounds) Year Month 3 39 2004 10 XC90 2003, XC90 2004, XC90 2005, XC90 2006, XC90 2007, XC90 2008 Replaces issue: 2003 12 J3904620 Page 1 of 18 Required tools A0000162 A0000163
More informationCold Air Intake Installation Instructions
Page 1/5 3.04 INS262 BAVARIAN AUTOSPORT Cold Air Intake Installation Instructions NOTE: Throughout the instructions the term AFM is used. It refers to the Air Flow Meter which is located between the engine
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS REAR DISC CONVERSION KIT A126-2 1988-98 C1500 2WD 10" REAR DRUM Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take the time to read
More informationService Manual Air Tech Second Stage
Service Manual Air Tech Second Stage Copyright 2002, Cressi-sub Revised 3/2002 2 Air Tech Second Stage Service Manual Contents BEFORE STARTING... 3 DISASSEMBLY... 3 PARTS CLEANING AND LUBRICATION... 9
More informationvacuum/boost vent mounted ES best viewed in Acrobat Reader This tutorial is provided as a courtesy by ECS Tuning.
vent mounted vacuum/boost ES2713030 This tutorial is provided as a courtesy by ECS Tuning. best viewed in Acrobat Reader Proper service and repair procedures are vital to the safe, reliable operation of
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application 2012 CIVIC 4-DOOR Publications No. AII 45625-46263 Issue Date MAY 2011 PARTS LIST Trunk spoiler Left trunk spring (marked yellow) Template 4 Clip grommets
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. Bll 27035-29095 2005 RL Issue Date MAY 2005 PARTS LIST Trunk spoiler Right support strut Left support strut 4 Washer-bolts 4 Adhesive seals
More informationRemote engine start INSTALLATION INSTRUCTIONS
GENUINE Remote engine start INSTALLATION INSTRUCTIONS Thank you for purchasing a genuine Mazda accessory. Before removal and installation, be sure to thoroughly read these instructions. Please read the
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. Bll 33590 2007 RL Issue Date AUG 2006 PARTS LIST Trunk spoiler Right support strut Left support strut 4 Washer-bolts 4 Adhesive seals TOOLS
More informationInstallation instructions, accessories. Multimedia monitor with DVD, Dual screen. Multimedia monitor with DVD, Dual screen V1.
Installation instructions, accessories Instruction No 30756560 Version 1.2 5 Part. No. 30756177 Multimedia monitor with DVD, Dual screen Volvo Car Corporation Multimedia monitor with DVD, Dual screen-
More informationLIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions
LIFT-507 BMF Lift Kit E-Z-Go RXV Gas or Electric Installation Instructions Contents of LIFT-507 E-Z-Go RXV BMF Lift Kit: a (1 ea.) BMF A-Arm Assembly b (1 ea.) Driver Side Shock Tower c (1 ea.) Passenger
More informationJ.:~ II: I- Tooisl items needed r..."..:..~... i "..:.~...r...
,_, VY :::":"",,!'!'O COM"'ANV L,AblL"'Y r":i" : r := : _, q :: \ f : :: W' i!" : : "! r>,> : ''fp, (t':t, ;;: :: ; \ \'rl('\ '\, ';;?;;i'
More informationASSEMBLY MANUAL. Kit features. MS:110
MS:110 ASSEMBLY MANUAL Graphics and specifications may change without notice. Specifications: Wing span-------------------------------------------------- 62.9 in---------------------------------------
More information