BOLTING TECHNOLOGY.
|
|
- Milton Rogers
- 5 years ago
- Views:
Transcription
1 BOLTING TECHNOLOGY
2 Bolting Technology Yale bolting technology is the general term of reliable and proven equipment renowned world-wide for controlled tightening or loosening of bolted connections. The comprehensive range of products includes hydraulic torque wrenches for a maximum tightening torque of up to Nm, pneumatic torque wrenches for up to 4000 Nm as well as hydraulic bolt tensioners for a maximum thread dimension of M150. Hydraulic flange spreaders, hydraulic nut splitters and manual torque multipliers for up to Nm complement the portfolio. Special features of these products are their long service life, easy and quick maintenance and repair. All products from the bolting technology sector fulfil national and international regulations such as e.g. the EC Machinery Directive 2006/42/EC including corresponding supplements. It goes without saying that all torque wrenches are provided with a calibration certificate and operating instructions with a declaration of conformity or a manufacturer s declaration. Table of Contents Page Hydraulic torque wrenches 8-19 Pneumatic torque wrenches Hydraulic nut splitters Flange spreaders 24 Hydraulic lifting & spreading wedges We also provide re-calibrations for torque values up to Nm on request. Torque multipliers Torque wrenches Hydraulic bolt tensioners Hydraulic tools Hydraulic nut splitters Selection charts 44 Impact sockets Hydraulic flange spreaders Backup wrench Torque wrenches 7
3 Bolting Technology Flange spreaders Flange spreaders model FS Spreading force max. 4.5 t Features Lightweight Jaws open parallel Easy one person operation Opens to 76 mm (3 inch) Model FS-10H with hydraulic cylinder, model FS-10M with ratchet drive for manual operation Max. working pressure 700 bar Technical data model FS Model EAN-No. Spreading force Stroke Weight * t lbs mm inch kg lbs FS-10H * FS-10M * Model FS-10H, hydraulic Model FS-10M, manual Selection charts for suitable combinations of flange spreaders and hydraulic pumps Flange spreaders model FS Spreading force max t Features Opening stroke max. 29 mm (1.14 inch) with standard wedge Min. access gap of only 3 mm is needed. Option Opening stroke max. 56 mm (2.20 inch) with special wedge Technical data model FS Model EAN-No * Spreading force Stroke Flange thickness max. Flange dimension Stud-Ø Wedge Special wedge t lbs mm inch mm inch mm inch mm inch mm inch mm inch FS-5T * x 58 2 x FS-10T * x 93 2 x Dimensions model FS Model FS-5T FS-10T mm inch mm inch A B C min C max D E F G H I J
4 Bolting Technology Hydraulic lifting wedges Hydraulic lifting wedge model HK-16T The hydraulic lifting wedge has been developed as an easy to use/cost effective way to find solutions for lifting heavy objects where minimal clearance is available. It will lift objects vertically where an access gap of 3/8" (9.5 mm) or more is available. The HK-16T will lift an object fast, secure and safe with a lifting force of 16 tons per tool. Multiple units can be used if higher lifting forces are needed. Selection charts for suitable combinations of hydraulic lifting wedge and hydraulic pumps Mini kit (EAN-No ) 1 x Lifting wedge HK-16T 1 x Stepped block Standard kit (Art.-No ) 1 x Lifting wedge HK-16T 1 x 700 bar hydraulic hand pump two-stage 1 x 700 bar hydraulic hose 1 x Stepped block Dimensions model HK-16T Wedge, closed Safety block Wedge, opened Stepped block 25
5 Bolting Technology Hydraulic spreading wedges Hydraulic spreading wedge YSW-14T The spreading wedge YSW-14T has been developed as the simple cost-effective solution for flange spreading. An acces gap of min. 6.5 mm is needed. With a max. working pressure of 700 bar the max. spreading force is 14 t. The spreading wedge can be operated by using a hydraulic hand pump or foot pump. Mini kit (EAN-No ) 1 x Lifting wedge YSW-14T Standard kit (EAN-No ) 1 x Lifting wedge YSW-14T 1 x 700 bar hydraulic hand pump two-stage 1 x 700 bar hydraulic hose Stepped block (EAN-No ) 2 x Stepped block 2 x Screws CSK M6 x 12 mm 1 x Allen key Maxi kit (Art.-No ) 2 x Lifting wedge YSW-14T 1 x 700 bar hydraulic pump two-stage 2 x 700 bar hydraulic hose 2 x Safety block 1 x Twin manifold block Dimensions model YSW-14T Wedge, closed Safety block, side view Selection charts for suitable combination of spreading wedge and hydraulic pumps Wedge, opened Stepped block, top view 26
BOLTING TECHNOLOGY.
BOLTING TECHNOLOGY www.cmco.eu Bolting Technology Yale bolting technology is the general term of reliable and proven equipment renowned world-wide for controlled tightening or loosening of bolted connections.
More informationBOLTING TECHNOLOGY.
BOLTING TECHNOLOGY www.cmco.eu Bolting Technology Yale bolting technology is the general term of reliable and proven equipment renowned world-wide for controlled tightening or loosening of bolted connections.
More informationIndustrial Products GmbH
Industrial Products GmbH Hydraulic torque wrenches Lifting & spreading wedges Hydraulic bolt tensioners Torque multipliers Pneumatic torque wrenches Flange spreaders Further information on hydraulic pumps
More informationBolting Solutions. A complete range of professional hydraulic and mechanical tools for bolting applications
Bolting Solutions A complete range of professional hydraulic and mechanical tools for bolting applications Enerpac Bolting Tools Hydraulic Technology Worldwide ENERPAC offers a comprehensive range of bolting
More informationHydraulic hand tools
Hydraulic hand tools Puller sets - spring return 78 Puller sets - spring return model HP 5 HP 10 HP 17 HP 30 art no 100.562.001 100.562.002 100.562.003 100.562.004 A (min. / max.) mm 30 / 150 50 / 295
More informationHEAVY BOLTING APPLICATIONS
HEAVY BOLTING APPLICATIONS Hydraulic Wrenches A complete solution for every tool application Ph: 1300 WALTAN (1300 925 826) Enerpac Bolting Tools Enerpac's Bolting Solutions caters to the complete bolting
More informationTITAN. TITAN is a leading bolting solutions provider committed to offering the most reliable, comprehensive and SUPERIOR BOLTING SOLUTIONS world wide.
Dependable Fast Efficient T-Series & LP Series Hydraulic Torque Wrenches are an integral element to get your bolting job done right, on time, every time S M is a leading bolting solutions provider committed
More informationE411e. Professional Hydraulic and Mechanical Tools for the Bolting Industry
E411e B o l t i n g S o l u t i o n s Professional Hydraulic and Mechanical Tools for the Bolting Industry GB Enerpac Bolting Solutions ENERPAC s Bolting Solutions caters to the complete bolting work-flow,
More informationE410 Bolting Solutions. A complete range of professional hydraulic and mechanical tools for the bolting industry
E410 Bolting Solutions A complete range of professional hydraulic and mechanical tools for the bolting industry Enerpac Bolting Tools ENERPAC'S Bolting Solutions caters to the complete bolting work-flow,
More information1/4" Torque Driver, 1-5 NM, Length 235 mm. 3/8" Torque Wrench, NM, incl. Adaptor to 1/2" Torque Wrenches.
1/4" Torque Driver, 1-5 NM, Length 235 mm - incl. bit-adaptor - auto-adjusting - click signal if set torque is reached Packed in a plastic case 975 3/8" Torque Wrench, 13.6-108.5 NM, incl. Adaptor to 1/2"
More informationHydraulicTorque Tools LOW IBT Hyspan Low Profile Low Height
www.wchristie.com HydraulicTorque Tools LOW IBT Hyspan Low Profile Low Height A LOW Hydraulic Torque Tool LOW HYDRAULIC With an open hexagon design and alloy lightweight structure the Christie LOW range
More informationMP and MP Diaphragm and Seal Kits for MP8000 Series Actuators
MP8000-6325 and MP8000-6350 Diaphragm and Seal Kits for MP8000 Series Actuators Contents of the MP8000-6325 Diaphragm and Seal Kit for MP82 and MP83 Actuators One seal, 5/8 in. Internal Diameter (I.D.)
More informationHOISTING EQUIPMENT 9
HOISTING EQUIPMENT 9 Hoisting Equipment Table of contents Page Yale and Pfaff-silberblau hoisting equipment products are reliable and proven equipment renowned world-wide for applications in industry,
More informationEnerpac Bolting Tools
E413 US Enerpac Bolting Tools ENERPAC'S Bolting Solutions caters to the complete bolting work-flow, ensuring joint integrity in a variety of applications throughout industry: Joint Assembly From simple
More informationTools for every conceivable need... BOLTING TOOLS
Tools for every conceivable need... BOLTING TOOLS TU SERIES SQUARE DRIVE HYDRAULIC WRENCHES PAGE 4-5 TX SERIES LOW CLEARANCE HYDRAULIC WRENCHES PAGE 6-8 BOLTING SERVICES / RENTAL PROGRAMS PAGE 9 TM PUMPS
More informationTWS-N - HYDRAULIC TORQUE WRENCHES - SQUARE DRIVE
TWSN HYDRAULIC TORQUE WRENCHES SQUARE DRIVE Working pressure 00 Bar Compact, lightweight, aluminium construction TWS00N itted with 60 UniSwivel quick release couplings TWS0N Hiorce TWSN series lightweight
More informationIndustrial Equipment HYDRAULIC TOOLS
Industrial Equipment HYDRAULIC TOOLS PRODUCT INDEX Page Hydraulic Nut Crackers 73 Hydraulic Cutters 73 Mini-Cutter HMC 8 U 73 HAND PUMPS Hand Pump - Single-Stage - 733 Single-Acting Hand Pump - Two-Stage
More informationBOLTING TOOLS Tools for every conceivable need...
BOLTING TOOLS Tools for every conceivable need... www.powermaster.in carries the worlds most comprehensive life of Bolting Tools. Whether you need manual or hydraulic, air driven or Electric. We are your
More informationIncremental Lifting System
Synchronously Lift and Mechanically Hold Incremental Lifting System JS-Series, Jack-Up Systems JS-Series, Jack-Up Systems Shown: JS-250-Series Jack-Up System (one lifting tower shown) Incremental Lifting
More informationMg7TM Mini-gap Flange Spreader
Spreading Wedges Mg7TM Mini-gap Flange Spreader The MG7TM can be used during: KIT CoMPoNENTS 1 x MG7TM Tool 2 x Spreading Bar Gross Kit Weight 5 kg (11.05 lbs) SPREADING FORCE = 6.8 T (68 kn) innovative
More informationPORTABLE HIGH PRESSURE POWER PACK Type RPS
Resato s portable power pack type RPS is a self-contained air-driven unit of proven design. Not only can it be used to pressurize valves, fittings, hoses, piping, vessels and wellhead equipment, but it
More informationS-Series, Square Drive Hydraulic Torque Wrenches
-, quare Drive Hydraulic Torque Wrenches hown: 3000PX etting New tandards in afety, implicity and Performance Two Handle tyles Robust angled positioning handle comes standard with every - (X-Edition) tool.
More informationBOLTING TECHNOLOGY.
BOLTING TECHNOLOGY www.cmco.eu Industrial Products GmbH The brands Yale is the leading brand for standard manual hoisting equipment in Europe. As early as 1877, Yale produced the first spur-geared hand
More informationM x Cast Iron Flanged Valve Linkage Kit for Mounting a Single M9000 Series Electric Actuator
Installation Instructions Issue Date June 15, 2007 Supersedes November 15, 2002 M9000-53x Cast Iron Flanged Valve Linkage Kit for Mounting a Single M9000 Series Electric Actuator Installation Parts Included
More informationFlange Spreader Parts and Operating Manual
Mathey Dearman Inc. 4344 South Maybelle Ave. Tulsa, OK 74107 Phone: 800-725-7311 918-447-1288 Fax: 918-447-0188 Flange Spreader Parts and Operating Manual General Information The Flange Spreader is used
More informationIncremental Lifting System
Synchronously Lift and Mechanically Hold Incremental Lifting System JS-Series, Jack-Up Systems JS-Series, Jack-Up Systems JS-250, Enerpac Jack-Up System (one lifting tower shown) Incremental Lifting System
More informationBecause ensuring a leak-free solution is critical. It has to be Hydratight.
Torque Solutions Because ensuring a leak-free solution is critical. It has to be Hydratight. For more than 100 years, Hydratight has provided world-class bolted joint solutions, assessing and managing
More informationSTEP 1 Clutch Slave Cylinder Piston Removal and Installation
STEP 1 Clutch Slave Cylinder Piston Removal and Installation This step is mandatory as the Clutch Adjustment Screw will remain bolted in place and you will not be able to remove the Primary Drive Cover
More informationBRAKE SERVICE $ $ $ $ $ $ $ $ $ $ BRAKE SERVICE MEASURING TOOLS $ $126.
BRAKE SERVICE MEASURING TOOLS CEN-3B630 Digital Drum Gauge Check trailer drums without removing the wheel Range: 0-16.65" (0-425mm) Graduations:.005" (.01mm) Arm depth: 3.75" $428. 59 CEN-3M335 Wheels
More informationSubsea Tools. A Buyers Guide.
Subsea Tools A Buyers Guide About Mirage Machines. Our proprietary technology drives the development of the most reliable, durable, efficient and precise portable machine tools on the market, that are
More informationM x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators
Issue Date June 15, 2007 Supersedes November 15, 2002 M9000-53x Series Cast Iron Flanged Valve Linkage Kit for Tandem Mounting of M9000 Series Electric Actuators Installation Parts Included Linkage Stem
More informationTiger Lifting Home of the Tiger hoisting range & Tiger subsea lifting products
Tiger Lever Hoist Model No PROLH (with overload protection) Main Features Now available with slipping clutch overload protection Range 750kg - 10.0t Equipped with our unique dual brake mechanism New twin
More informationThe Sika Solution x 600 x 700H / 900H. Class D. Roadway Installation Guidelines p 9-11
The Sika Solution Aluminium Jointing Chamber and Security Access Cover Set Package 1200 x 600 x 700H / 900H Class D Contents: Assembly Instructions p 2-8 Roadway Installation Guidelines p 9-11 Sika Technology
More informationHYDRAULIC JACKS/CYLINDERS
TOOLS WITH SAFETY Hydraulic Jacks Hand Pumps Electric Pumps Nut Splitters Flange Spreaders Hydraulic Pullers S RC S AR COMPLETE BOLTING SOLUTIONS ISO 9001:2008 www.torcstar.com HYDRAULIC JACKS/CYLINDERS
More informationElectric and Pneumatic. AirTite & E-Tite
Electric and Pneumatic TORQUE WREncHES AirTite & E-Tite AirTite Pneumatic Torque Wrenches Calibrated & ready for use Powerful Compact Accurate Durable Faster Light-Weight Efficient TITAN s Patented Technology
More informationHYDRAULIC TOOLS CATALOGUE 2013
HYDRAULIC TOOLS CATALOGUE 2013 TLP HYDRAULIC TOOLS welcomes you to its proud range of high pressure hydraulic tools and equipment. Based on many years of manufacturing and development, TLP offers a full
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationHEAVY DUTY PNEUMATIC TORQUE WRENCH (C-RAD) USER GUIDE
HEAVY DUTY PNEUMATIC TORQUE WRENCH (C-RAD) USER GUIDE Ref: WCOI.041 Date: June 2015 Issue: 4 Page Description CONTENTS 1 Introduction Training Requirements 2 General Safety 3 C-RAD Wrench Models Covered
More informationWhat we do every day makes us
W W W. R A P I D T O R C. C O M What we do every day makes us the most comprehensive bolting solutions company in the world. Tools Reach proper load with torque. W W W. R A P I D T O R C. C O M RT Square
More informationCONTENTS VERSION 53-30/05/16 (C) EQUALIZER INTERNATIONAL
CONTENTS Equalizer International is an award-winning, world-leading designer and supplier of innovative flange maintenance tools for the oil and gas, petrochemical, nuclear, water, mining and renewable
More informationTITAN. AirTite Pneumatic Torque Wrenches & ETite Electric Torque Wrenches. Dependable Fast Efficient
TECHNOLOGIES INTERNATIONAL, INC SUPERIOR BOLTING SOLUTIONS Dependable Fast Efficient AirTite Pneumatic Torque Wrenches & ETite Electric Torque Wrenches T M are an integral element for getting your bolting
More informationSimply... The Most Advanced Wrench Ever Produced
Technical TU SERIES SPECIFICATIONS Simply... The Most Advanced Wrench Ever Produced Faster Stroke! Anti-Back Lash Mechanism! Hands-Off Operation! Accurate Repeatability! Are only a few of the Improvements
More informationThank you for purchasing your new Carbon Fiber Front Strut Brace, we appreciate your business! Project Overview:
Skill Level 1 - Easy Audi B8 Carbon Fiber Front Strut Brace Installation Instructions Thank you for purchasing your new Carbon Fiber Front Strut Brace, we appreciate your business! Project Overview: Adding
More informationPT. HYDRA ASIA ENERGY
Mechanical Installation Pre - Commisioning & Commissioning Hydrostatic Testing Services Bolt Tensioning (Top side and Sub sea) Hydraulic Torque Wrench & Hot Bolting Pipe Cold Cutting - Beveling Machine
More informationWhat we do every day makes us
WWW.RAPIDTORC.COM EN 2012 What we do every day makes us the most comprehensive bolting solutions company in the world. WWW.RAPIDTORC.COM We don t waste time reminiscing on how good we did yesterday; we
More informationAir Tools INDUSTRIAL & AUTOMOTIVE RANGE
Air Tools INDUSTRIAL & AUTOMOTIVE RANGE Impact Wrenches Impulse Wrenches Ratchet Wrenches Impact Sockets Screwdrivers Angle Grinders Die Grinders Sanders Needle Scalers Drills Haers Chisels Saws Riveters
More informationHot Tapping Products
Hot Tapping Products HMT Series Hot Tapping Machines The Hydratight MHT range is designed for ease of use in making 3 60 inch (76 1524mm) taps into various material pipelines and tanks with the ability
More informationMITSIBUSHI FTO NUT,BOLT AND TORQUE GUIDE
MITSIBUSHI FTO NUT,BOLT AND TORQUE GUIDE All information below has been obtained from the official Mitsubishi fto workshop manual, and I hold no liability for any incorrect information. Heads marked 4
More informationhttps://quickserve.cummins.com/qs2/pubsys2/xml/en/procedures/40/ tr.html
Page 1 of 7 NOTE: The timing pin is used to accurately locate TDC for setting the overhead. The timing pin is typically located below the fuel pump. for front gear train engines, in the front gear housing
More informationSPECIAL PRICE PROMOTION. WORKSHOP EQUIPMENT. BODYWORK TOOL ASSORTMENT; BELT SANDER, IMPACT DRIVER, TORQUE WRENCH; HOTMELT ADHESIVE GUN.
Bodywork tool assortment. - This tool assortment (25-pieces) can be used for working in the bodywork repair area. - Universal grips for small round parts, flat parallel clamping jaws, clamping range sb
More informationREMOVAL AND REPLACEMENT
2002 Mitsubishi Truck Montero LTD 4WD V6-3.5L SOHC Vehicle > Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Service and Repair REMOVAL AND REPLACEMENT https://my.alldata.com/repair/#/repair/article/36847/component/64/itype/401/nonstandard/
More informationWho We Are. One Company, Total Support, Complete Solutions
Torque Solutions Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided worldclass bolted joint solutions and continues to set international standards
More informationCERTAIN MODEL YEAR FUSION AND ESCAPE VEHICLES EQUIPPED WITH A 6F35 TRANSMISSION SHIFTER CABLE BUSHING REPLACEMENT
PAGE 1 OF 9 CERTAIN 2013-2016 MODEL YEAR FUSION AND 2013-2014 ESCAPE VEHICLES EQUIPPED WITH A 6F35 TRANSMISSION SHIFTER CABLE BUSHING REPLACEMENT OVERVIEW In some of the affected vehicles, the bushing
More informationRINK Model 1622 Series number:
OPERATION MANUAL AND LIST OF PARTS RINK Model 1622 Series number: WARNING: IN ORDER TO ENSURE SAFE USE OF THE MACHINE AND OPTIMAL RESULTS, IT IS ESSENTIAL TO READ THIS OPERATION MANUAL CAREFULLY BEFORE
More informationINSTALLATION INSTRUCTIONS FOR DSP9600/9100 WHEEL BALANCER
Form 5063T, 06-05 Supersedes Form 5063T, 02-04 INSTALLATION INSTRUCTIONS FOR DSP9600/9100 WHEEL BALANCER This document provides the information needed to install the DSP9600/9100 Wheel Balancer. NOTE:
More informationEibach Pro-Damper Shocks & Struts (05-09 All):
Eibach Pro-Damper Shocks & Struts (05-09 All): Required tools: 3/8 and 1/2 drive ratchets 7, 8, 10, 15, 16, 17, 18, 21 & 22 mm open ended wrenches 8 & 10 mm box end wrenches 10mm socket 13, 15 & 18 mm
More informationCrank Scraper & Windage Tray for GM LS & Vortec Engines
Crank Scraper & Windage Tray for GM LS & Vortec Engines 3.622 Stroke & 4.000 Stroke Engines Made in USA Important: Read these instructions in their entirety prior to installation. Rev 160614 Applications
More informationRimac Spring Tester Retro-Fit Kit
Rimac Spring Tester Retro-Fit Kit Fig 1 Check for All Parts Computer Cable Black Box Rimac Internal Spring Deflection Sensor & Bracket to Measure Force Valve Spring Length Sensor and Bracket Software CD
More informationINSTALLATION & OWNER S MANUAL
Rev. E p. of 3 INSTALLATION & OWNER S MANUAL V446 Front Cab Kit and V446 Rear Cab Kit for RTV 40 INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave
More informationHuron Speed Products Twin Turbo Install Gen 2 CTS-V (09-15)
Huron Speed Products Twin Turbo Install Gen 2 CTS-V (09-15) 1 2 Remove two bolts in trunk cover with 8mm socket. Pull up on cover to remove. Unscrew net tie down on side cover where battery is located
More informationFlowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve
Flowmeter for Gases Thermal mass flow measurement Pipe sizes up to 2" Integrated inlet and outlet pipes for flow conditioning -20mA signal output of process value Type can be combined with... Type 8802-YG
More informationCOMPRESSOR REMOVAL OF MANIFOLD GAUGE SET ON VEHICLE INSPECTION AC 18 AIR CONDITIONING SYSTEM
AC18 AIR CONDITIONING SYSTEM 5. CONNECT STOP VALVES TO SERVICE VALVES Tighten the nuts by hand. CAUTION: Do not connect the wrong valves to the high pressure and the low pressure sides. To prevent loosening
More informationF G. Punch Dimensions
SPH Series - Single Acting Punch Capacity... 35 tons Maximum Thickness....5 in. Maximum Pressure... 10,000 psi Industrial grade, single acting, spring return design. Punches holes in material up to.5 thick
More information400 Series 403F-11 Industrial 14.1 kw / rpm
The latest Perkins 400F range of industrial engines is an evolution of the highly successful and productive Perkins 400D range and has been developed specifically to meet the latest set of emissions in
More informationTERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page 2 EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page
More informationHandtorque Multipliers What is a Torque Multiplier? How Handtorque Torque Multipliers Work Why use a Handtorque Torque Multiplier?
Handtorque Multipliers What is a Torque Multiplier? A torque multiplier is a device that increases the torque that can be applied by an operator. Because the power output can not exceed the power input,
More informationClutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly
Copyright GEDORE Automotive GmbH, Germany (465) -01 KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.) Suitable for Self-Adjusting Clutches (with 6 and 8 bolt holes); e.g. on VW-Audi,
More information- Electrical security> no access to the live parts. - Effective integrated brake, capable of holding. 1.2 times the nominal torque > insure an
Competitive advantages 6 Simplicity - Simple end-limit system, very fast thanks to memory rings, and common to the whole range (easy training) 5 years Warranty Centreo - Motor delivered ready to be installed
More informationKRAVITCH KEYHOLE TOOLS MODULAR PIKE TOOLING SYSTEM (PATENTED)
KRAVITCH KEYHOLE TOOLS MODULAR PIKE TOOLING SYSTEM (PATENTED) O P E R A T O R S HOW THE PIKE SYSTEM P I K E WORKS A D A P T E R S COMPLETELY MODULAR TRULY QUICK- DISCONNECT MODULAR SYSTEM CAN BE ADAPTED
More informationNew HAZET Range of Pullers / Extractors
17 17 New HAZET Range of 2-Arm Pullers 3-Arm Pullers Hydraulic Pullers Ball Bearing Extractors Separators Internal Extractors Forged Quality Practical and Proven Tools New Innovative Range of Pullers For
More informationASSEMBLY. Engine. Special Tool(s) Installer, Crankshaft Vibration Damper (T74P-6316-B) Special Tool(s)
303-01A-1 ASSEMBLY Engine Special Tool(s) Tensioner, Timing Chain 303-571 (T97T-6K254-A) Special Tool(s) 303-01A-1 Installer, Crankshaft Vibration Damper 303-102 (T74P-6316-B) Holding Tool, Camshaft Sprocket
More informationThreaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35
Electrical temperature measurement Threaded resistance thermometer Model TR10-C, with fabricated thermowell model TW35 WIKA data sheet TE 60.03 for further approvals see page 7 Applications Machinery,
More informationPlease take time to read and understand these installation instructions.
Please take time to read and understand these installation instructions. CORSA recommends that installation of this system be performed by a qualified service center or professional muffler installer who
More informationПК Power... Precisely!
ПК- 103161-02 1 Power... Precisely! ее Introduction Page 18-23 Hydraulic Torque Wrenches Technical Information Page 24 Recommended Torque Values Chart Conversion Factors Page 25-29 Stud Bolt Tensioners
More informationELECTRICALLY OPERATED TORQUE WRENCH (VC-RAD) USER GUIDE
ELECTRICALLY OPERATED TORQUE WRENCH (VC-RAD) USER GUIDE Ref: WCOI.055 Issue: 5 Date: June 2015 CONTENTS Page Description 1 Introduction 2 Training Requirements General Safety 3 Accessories Available VC-RAD
More informationSECTION D Fuel Charging and Controls Turbocharger
303-04D-i Fuel Charging and Controls Turbocharger 303-04D-i SECTION 303-04D Fuel Charging and Controls Turbocharger CONTENTS PAGE Turbocharger Body On... 303-04D-2 303-04D-2 Fuel Charging and Controls
More informationIndustrial Torque Solutions. Contact:
Industrial Torque Solutions Contact: Who we are One Company, Total Support, Complete Solutions Over many years Hydratight has provided world class bolted joint solutions and continues to set international
More informationGlobe Valve Type Fig. 1 Type 3241 Globe Valve. Mounting and Operating Instructions EB EN
Globe Valve Type 3241 Fig. 1 Type 3241 Globe Valve Mounting and Operating Instructions EB 8015-1 EN Edition July 2012 Contents Contents Page 1 Design and principle of operation.................... 4 2
More informationV6 Spring Belt Tensioner
Dodgerunner s V6 Spring Belt Tensioner Installation Guide Dodgerunner 2007 The bracket consists of two pieces of 1/8" steel bolted together. The main piece is flat plate with welded-on alternator mounting
More informationAPP S pumps APP S / APP S / APP S 21-38
MAKING MODERN LIVING POSSIBLE Instruction APP S 2.0-3.5 / APP S 5.1-9.0 / APP S 21-38 ro-solutions.com Instruction Table of Contents 1. Identification...2 2. System design...3 2.1 Open system design...3
More informationHydraulic Torque Wrenches - Hex Cassette
WEN USTLI Hydraulic Wrenches - Hex Cassette HOSE SWIVEL - 360 x 360 Hydraulic Hose Swivel otation. llows the operator to move hoses away from obstructions - Safer PUMP Tools will run off any 10,000 psi
More informationThe new monorail trolley hoist YGK. Yale Industrial Products GmbH
The new monorail trolley hoist YGK Yale Industrial Products GmbH 1877 Yale designs the first spur geared hand chain hoist incorporating the Weston screw-and-disc type load brake. The design principle is
More informationBanks Monster Exhaust System Chevy/GMC 1500 Silverado 4.8L, 5.3L, 6.0L V-8 Gas, New Body Style
with Installation Instructions Owner smanual Banks Monster Exhaust System 2007-2008 Chevy/GMC 1500 Silverado 4.8L, 5.3L, 6.0L V-8 Gas, New Body Style THIS MANUAL IS FOR USE WITH MONSTER EXHAUST SYSTEMS
More informationWheel Stud Conversion Kit Installation Instructions
Wheel Stud Conversion Kit Installation Instructions Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing
More informationEngine. Special Tool(s) Adapter for (T97T-6256-A) Adapter for (T97T-6256-D)
SECTION 303-01A: Engine 4.0L SOHC 2009 Mustang Workshop Manual ASSEMBLY Procedure revision date: 05/10/2010 Engine Special Tool(s) Adapter for 303-564 303-578 (T97T-6256-A) Adapter for 303-577 303-576
More informationHow to select your fastening screwdrivers?
Fastening Pistol shape for horizontal applications or for better controllability Straight shape for vertical applications How to select your fastening screwdrivers? Clutch Type IMPACT (rocking dog) Good
More informationAircraft and Turbine Engine Maintenance Tools
Aircraft and Turbine Engine Maintenance Tools Over many years Hydratight has provided world class bolted joint solutions and continues to set international standards in joint integrity for its customers
More informationDO YOU NEED TO BUST SOME NUTS?
DO YOU NEED TO BUST SOME NUTS? COMPANY PROFILE Industrial Bolting had its humble beginnings in 1999 in Central Indiana after seeing a need for a more diversified company to offer a wide range of tools.
More informationNote: Replace the washer and the spacer above the turgo or the shaft adapter with the spacer above the washer as shown in the following pictures.
BEARINGS, SERVICE & ASSEMBLY IMPORTANT Bearing maintenance is important. You should replace bearings ONCE PER YEAR or as soon as you notice any looseness from wear. If they are too loose, severe damage
More informationExhaust System Installation Corvette C6
CORVETTE C6 Exhaust System Installation 2009+ Corvette C6 Recommended Tools: 13 mm Socket 15 mm Socket 18 mm Socket 15 mm Open End Wrench Torque Wrench (20-100 ft.-lb.) Drive extensions for Ratchet (MINIMUM
More informationIndustrial Torque Solutions
Industrial Torque Solutions Who we are One Company, Total Support, Complete Solutions Over many years Hydratight has provided world class bolted joint solutions and continues to set international standards
More informationPFW 6855 Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids Max: 227kg/500lbs MOUIN_PFW6855_V01 Refer to Step: Included components 3 10
More informationVALVE TIMING CHECK-TIMING BELT COVER INSTALLED
TIMING BELT SERVICE VALVE TIMING CHECK-TIMING BELT COVER INSTALLED 1. Remove number one spark plug. 2. Using a dial indicator; set number one cylinder to TDC on the compression stroke. 3. Remove the access
More informationFord Racing GT500 Style Strut Mount Upgrade (05-12 All):
Ford Racing GT500 Style Strut Mount Upgrade (05-12 All): Required tools: (2) Jack stands Floor jack (1 is required but 2 is preferred) Torque wrench Spring compressor tool (can be rented at your local
More information- Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods
- Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods Use Areas: Automotive Maintenance Electrical Industries Mecanical Engineering Industry Motorbike Garage Automobile
More informationBOLT TIGHTENING SOLUTIONS
BOLT TIGHTENING SOLUTIONS We offer a complete and dynamic range of bolting We offer complete and dynamic range of bolting tools including tools including hydraulic bolt tensioners and hydraulic hydraulic
More information2001 Mitsubishi Truck Montero LTD 4WD V6-3.5L SOHC Copyright 2006, ALLDATA 8.80 Page 1. Timing Belt: Service and Repair
2001 Mitsubishi Truck Montero LTD 4WD V6-3.5L SOHC Copyright 2006, ALLDATA 8.80 Page 1 Timing Belt: Service and Repair 2001 Mitsubishi Truck Montero LTD 4WD V6-3.5L SOHC Copyright 2006, ALLDATA 8.80 Page
More information2100:- POWERFUL & LIGHTWEIGHT
POWERFUL & LIGHTWEIGHT 2100:- CP7749 1/2 Art nr 8941077491 Max torque (rev): 1,300 Nm Working torque (fwd): 135-704 Nm S2S technology and 3 setting positions Free speed: 7,000 rpm Twin hammer clutch Weight
More informationA good connection. International approvals.
E X - P L U G S A N D R E C E P T A C L E S A to A Plastic version for Zone and Zone A good connection Providing electrical energy there, where it is most needed even in hazardous areas for the Zones,,
More informationEC 150T. Spare parts list. Hydraulic breakers. EC 150T s/n DEQ Construction Tools GmbH No
EC 150T Spare parts list Hydraulic breakers EC 150T s/n DEQ181223-2018 Construction Tools GmbH No. 3390768001 2018-07-30 General information This spare parts list applies to the following: Part number
More information