Welded cable ladder system
|
|
- Harold Cummings
- 5 years ago
- Views:
Transcription
1 Title page Welded cable ladder system 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 System information
2 OO - Pure cable ladder competence Electricians have placed their trust in OO ettermann cable ladders for decades. The range stretches from riveted, clinched and welded cable ladders, which are used in countless industrial plants around the world. Customers can always rely on a robust and easy-to-mount structure of each individual component. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 2
3 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 Welded cable ladders Now, OO has reinvented the welded cable ladder and thus perfected the welded cable ladder system. Thanks to the special shape and innovative rung, the welded cable ladder can offer special technical properties and benefits during mounting. The range of materials is broad: Strip and hot-dip galvanised, A2 and A4 rust-proof stainless steel and powder-coated versions are available.
4 Stable welding - extremely supportive The highest level of stability, combined with the optimum space for vertical and horizontal cable assignment that was what we strived for when developing the new generation of welded cable ladders. Here is the result. Highly resistant The rungs are welded to the lower flange. The flush connection is highly resistant and can also withstand the greatest loads. The flush connection of the rung with the lower flange guarantees optimum force transmission. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 4
5 Practical covers For horizontal installation, a cover on top offers protection of the cables against dust and dirt. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 Volume The special position of the rung offers an additional benefit. Thanks to the welding of the rung to the underbelt, the cable ladder offers additional installation space for cables. Tested Stability and reliable corrosion protection - also at the welding points: oth of these were checked in comprehensive testing in our own ET Test Centre. Thus, the cable ladders passed the salt spray and load tests perfectly. 5
6 Innovative rung OO has reinvented the rung and patented it. Its well-thought-out hole pattern is perfectly tailored to the requirements of all kinds of industrial installations. The special feature: The rungs can be filled on both sides. This means that the ladder can be equipped flexibly whilst its carrying capacity can be used to the optimum. The result: Smaller ladder widths are often sufficient during mounting. Rungs reimagined The double-sided filling of the rungs allows flexible installation and offers the maximum of installation space. The rungs are perfectly matched to the fastening elements (e.g. the U clamps, type 205). 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207
7 One rung for all The innovative rung is used in the whole cable ladder system up to a width of KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 7
8 Perfectly matched wall mounting The welded cable ladder offers major advantages in horizontal and free-standing mounting. However, the cable ladder is also extremely practical when it is mounted directly on the wall. Free space With wall mounting, the wellthought-out construction of the cable ladders ensures a spacing of approx. five between the rung and the wall. This provides space during the installation. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 8
9 U clamps Thanks to the range of OO U clamps clips of different types and sizes, the right fastening element is available for every installation situation. For example, U clamps clips can be used with a metal trough in areas with special requirements, such as industry. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 9
10 Perfectly matched the fittings The fittings of the cable ladder system are the logical addition to the section material. They are also machined with welded rungs and are supplied in the materials and surfaces of the cable ladders. Easy handling An optimised standard radius of 00 instead of the previous 490 makes the fittings more compact and thus easier to handle. Continuous perforation Thanks to the innovative rung, the fittings can also be filled on both sides. The continuous perforation allows the use of a wide range of OO U clamps clips. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 0
11 Three system radii The fittings are now available in three system radii. The standard system radius is 00, although 00 and 900 radii are also available on request. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207
12 One for all - the multifunctional connector The new OO component allows easy connection of cable ladders and, at the same time, flexible implementation of shape or direction changes. Extraordinarily flexible The side rails of the multifunctional connector can be adjusted to any angle and any installation situation, so that both syetrical and asyetrical reductions are possible. Asyetrical reduction Syetrical reduction 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 2
13 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 Tee Connection of adjustable bend elements 0-0 bend
14 Installation principle, welded cable ladder 5 Cable ladder LCIS 2 Add-on tee Multifunctional connector 4 Tee 5 Cover with turn buckle 90 bend 2 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 4
15 4 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 5
16 Tested safety The ET Test Centre In our in-house ET Test Centre, OO simulates the loads which the welded cable ladder systems have constantly to withstand. We determine the maximum load capacity and carrying capacity of the system, as well as its resistance to corrosion. We are able to prove standardised testing of EMC properties using test reports. This means that, as a systems provider, OO places paramount importance on safety. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207
17 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 KTS testing system The KTS testing system was specially constructed for the testing of OO ettermann cable support systems. Thanks to its continuous further development and adaptation to the latest requirements, it can offer comprehensive testing options. For example, the tests required by DIN EN 57 can be carried out. They can prove a safe working load (SWL) - the reliable carrying capacity of the systems. 7
18 Local around the world.,000 employees. Over 0 countries. 40 subsidiaries. The values of our company are supported by continuous proximity to our customers. For us, customer proximity means that whenever borders open and new markets are created, we will be there. This regional proximity has proved its worth: OO is present on every continent with more than,000 employees in over 0 countries. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 8
19 Production location Subsidiary Representative office 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 Certified safety Our high-quality range of products and services is globally certified and fulfils all the key international standards. This simplifies the planning and execution of deployments around the world and ensures cost optimisation. Efficient processes at OO ensure that products are available at the right time. It doesn't matter where our customers are erecting or operating systems. Experience with major projects When the building size and the challenge of use increases, the complexity of the electrical infrastructure also increases. For decades, our electrical systems have contributed to the success of major projects. The comprehensive product range allows precise matching to the appropriate deployment location. Our customers can profit from the matching service process, which stretches from project planning through to delivery and consultation on the construction site. 9
20 Side height 0 Cable ladder LCIS LCIS 20 FS LCIS 0 FS LCIS 40 FS LCIS 50 FS LCIS 0 FS LCIS 20 FS LCIS 0 FS LCIS 40 FS LCIS 50 FS LCIS 0 FS LCIS 20 FT LCIS 0 FT LCIS 40 FT LCIS 50 FT LCIS 0 FT LCIS 20 FT LCIS 0 FT LCIS 40 FT LCIS 50 FT LCIS 0 FT Width FS Strip-galvanised m Cable ladder with 0 side height with welded C0 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is.5 and the appropriate U clamps clip is type 205. kg/00 m Item No x 28,5 5 L s LCIS 20 FS LCIS 0 FS LCIS 40 FS LCIS 50 FS LCIS 0 FS Length Width Useful crosssection spacing Rung cm² , Load 9 50 LCIS 20 FS.5 m kn/m. 2.0 m kn/m m kn/m..0 m kn/m 4.0 m kn/m 0.4 LCIS 0 FS LCIS 40 FS LCIS 50 FS LCIS 0 FS Load diagram LCIS 0 Permitted cable tray/ladder load in kn/m without man load Support width in m bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 20
21 Side height 0 LCIS 20 A2 LCIS 0 A2 LCIS 40 A2 LCIS 50 A2 LCIS 0 A2 LCIS 20 A4 LCIS 0 A4 LCIS 40 A4 LCIS 50 A4 LCIS 0 A4 Width V2A Stainless steel, A2 V4A Stainless steel, A4 m kg/00 m Item No Cable ladder with 0 side height with welded C0 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is.5 and the appropriate U clamps clip is type 205. Cable ladder LCIS LCIS 20 A2 LCIS 0 A2 LCIS 40 A2 LCIS 50 A2 LCIS 0 A2 Length Width Useful crosssection spacing Rung cm² L 0 s 9 x 28,5 00 5, KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 LCIS 20 A2.5 m kn/m. 2.0 m kn/m m kn/m..0 m kn/m 4.0 m kn/m 0.4 LCIS 0 A LCIS 40 A LCIS 50 A LCIS 0 A Load diagram LCIS 0 Permitted cable tray/ladder load in kn/m without man load Support width in m bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Colour SKH 0 OR Pastel orange PE Polyethylene End cap to cover cable ladder ends of side height 0. pair 40 kg/00 pairs Item No End cap 0 Load 2
22 Side height 0 Straight connector LVG 0 FS Side height 0 0 kg/00. Item No LVG 0 FT LVG 0 VA LVG 0 VA V2A Stainless steel, grade 04 V4A Stainless steel, grade Ti FS Strip-galvanised The bolt fastening ensures the continuity of the equipotential bonding. Connector for expansion LDVG 0 FT Side height 0 2 kg/00. Item No Connector for expansion for compensation of linear thermal expansion. The tightening torques of the self-locking screws on the loose bearing side are 5 Nm. Positioning of expansion connectors Metal temperature difference Maximum spacing between expansion connectors 0 C 70 metre 25 C 47 metre 40 C 5 metre 50 C 28 metre 5 C 2 metre 80 C 20 metre Further information can be found in our mounting instruction. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 22
23 Side height 0 LWVG 0 FS Side height 0 0 Angle connector kg/00. Item No LWVG 0 VA LWVG 0 VA V2A Stainless steel, grade 04 V4A Stainless steel, grade Ti FS Strip-galvanised The bolt fastening ensures the continuity of the equipotential bonding. LGVG 0 FS Side height 0 0 Adjustable connector kg/00. Item No LGVG 0 FT LGVG 0 VA LGVG 0 VA V2A Stainless steel, grade 04 V4A Stainless steel, grade Ti FS Strip-galvanised The bolt fastening ensures the continuity of the equipotential bonding. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 LMFV 20 FS LMFV 0 FS LMFV 40 FS LMFV 50 FS LMFV 0 FS LMFV 20 FT LMFV 0 FT LMFV 40 FT LMFV 50 FT LMFV 0 FT Multifunctional connector kg/00. Item No FS Strip-galvanised Multifunctional connector for joining cable ladders with a side height of 0. Syetric and asyetric reductions, bends between 0 0 and mounting/branch pieces can be created. 04 2
24 Side height 0 arrier strip TSG 45 FS arrier strip connector Dimen- H sion L m kg/00 m Item No TSG 45 DD TSG 45 VA TSG 45 VA V2A Stainless steel, grade 04 V4A Stainless steel, grade Ti FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip arrier strip for separation of cables of different voltages or functions. TSGV VA40 V2A Stainless steel, grade 0 0 kg/00. Item No arrier strip connector for screwless connection of the TSG barrier strip in all side heights. Hold-down clamp for barrier strip fastening KS KL VA40 V2A Stainless steel, grade 0 0 Hold-down clamp for screwless fastening of barrier strips in cable ladders. kg/00. Item No Slide nut ACMSN M ZL Length Width Height Thread.5 4 M 00 kg/00. Item No ACMSN M A4.5 4 M V4A Stainless steel, A4 ZL Zinc scale Slide nut for use with C0 profile rungs. Hexagonal bolt Resistance class d L SW SKS x0 A2 A V2A Stainless steel, A2 00 kg/00. Item No KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 24
25 Side height 0 90 bend L R FS L 90 0 R FS L R FS L R FS L 90 0 R FS L R FT L 90 0 R FT L R FT L R FT L 90 0 R FT L R A2 L 90 0 R A2 L R A2 L R A2 L 90 0 R A2 L R A4 L 90 0 R A4 L R A4 L R A4 L 90 0 R A kg/00. Item No R00 0 V2A Stainless steel, A2 V4A Stainless steel, A4 FS Strip-galvanised Connectors should be ordered separately and in the appropriate quantity. Mounting/branch piece LAA 20 R FS LAA 0 R FS LAA 40 R FS LAA 50 R FS LAA 0 R FS LAA 20 R FT LAA 0 R FT LAA 40 R FT LAA 50 R FT LAA 0 R FT kg/00. Item No FS Strip-galvanised R00 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 Connectors should be ordered separately and in the appropriate quantity. 0 25
26 Side height 0 Tee for cable ladder R LT 20 R FS LT 0 R FS LT 40 R FS LT 50 R FS LT 0 R FS LT 20 R FT LT 0 R FT LT 40 R FT LT 50 R FT LT 0 R FT LT 20 R A2 LT 0 R A2 LT 40 R A2 LT 50 R A2 LT 0 R A2 LT 20 R A4 LT 0 R A4 LT 40 R A4 LT 50 R A4 LT 0 R A kg/00. Item No KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 V2A Stainless steel, A2 V4A Stainless steel, A4 FS Strip-galvanised Connectors should be ordered separately and in the appropriate quantity. 2
27 Side height 0 Adjustable bend element LGE 20 FS LGE 0 FS LGE 40 FS LGE 50 FS LGE 0 FS LGE 20 FT LGE 0 FT LGE 40 FT LGE 50 FT LGE 0 FT LGE 20 FS LGE 0 FS LGE 40 FS LGE 50 FS LGE 0 FS kg/00. Item No FS Strip-galvanised Adjustable bend element with welded rung for use in the cable ladder types with a side height of 0. 0 s Radius table Quantity of elements Radius approx approx. 450 approx approx approx. 900 Please order two LGVG 0 articulated connectors separately. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/ Installation 27
28 Side height 0 Cable ladder LCIS LCIS 20 FT LCIS 0 FT LCIS 40 FT LCIS 45 FT LCIS 50 FT LCIS 0 FT Width m kg/00 m Item No Cable ladder with 0 side height with welded C0 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is.5 and the appropriate U clamps clip is type 205. L 0 s 9 x 28,5 LCIS 20 FT LCIS 0 FT LCIS 40 FT LCIS 45 FT LCIS 50 FT LCIS 0 FT Length Width Useful crosssection cm² Rung spacing Ø 9 50,5 0 Load LCIS 20 FT 2.0 m kn/m 2.5 m kn/m 2.0 m kn/m m kn/m 0.8 LCIS 0 FT LCIS 40 FT LCIS 45 FT LCIS 50 FT LCIS 0 FT Load diagram, cable ladder, type LCIS 0 Permitted cable tray/ladder load in kn/m without man load Support width in m bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 28
29 Side height 0 Width SLCS 20 FT SLCS 0 FT SLCS 40 FT SLCS 45 FT SLCS 50 FT SLCS 0 FT SLCS 75 FT SLCS 80 FT SLCS 90 FT SLCS 00 FT SLCS 20 FT Heavy-duty cable ladder SLCS m kg/00 m Item No Cable ladder with 0 side height with welded C0 profile rungs which are open in an upwards direction. Rolled side rail for reinforcement and as edge protection. Fastening to the bracket takes place using clamps, type LKS 40. The slot dimension of the frame is.5 and the appropriate U clamps clip is type 205. SLCS 20 FT SLCS 0 FT SLCS 40 FT SLCS 45 FT SLCS 50 FT SLCS 0 FT SLCS 75 FT SLCS 80 FT SLCS 90 FT SLCS 00 FT SLCS 20 FT Length Width Useful crosssection spacing Rung cm² L s 9 x 28, KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 SLCS 20 FT 2.0 m kn/m 4.0 m kn/m m kn/m SLCS 0 FT 4 2. SLCS 40 FT 4 2. SLCS 45 FT 4 2. SLCS 50 FT 4 2. SLCS 0 FT 4 2. SLCS 75 FT.5.9 SLCS 80 FT.5.9 SLCS 90 FT.5.9 SLCS 00 FT.5.9 SLCS 20 FT.5.9 Load diagram, cable ladder, type SLCS 0 Permitted cable tray/ladder load in kn/m without man load Support width in m bend in at permitted kn/m Load scheme during testing Load curve with cable tray/ladder width in Strut bend curve according to support width Load 29
30 Side height 0 End cap Colour SKH 0 OR Pastel orange PE Polyethylene End cap to cover cable ladder ends of side height 0 pair 20 kg/00 pairs Item No Straight connector LVG 0 FT Side height 0 The bolt fastening ensures the continuity of the equipotential bonding. 0 kg/00. Item No Connector for expansion LDVG 0 FT Side height 0 2 kg/00. Item No Connector for expansion for compensation of linear thermal expansion. The tightening torques of the self-locking screws on the loose bearing side are 5 Nm. Positioning of expansion connectors Metal temperature difference Maximum spacing between expansion connectors 0 C 70 metre 25 C 47 metre 40 C 5 metre 50 C 28 metre 5 C 2 metre 80 C 20 metre Further information can be found in our mounting instruction. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 0
31 Side height 0 Angle connector Side height LWVG 0 VA40 0 V2A Stainless steel, grade 04 The bolt fastening ensures the continuity of the equipotential bonding. 0 kg/00. Item No Adjustable connector LGVG 0 FT Side height 0 The bolt fastening ensures the continuity of the equipotential bonding. 0 kg/00. Item No KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 LMFV 20 FT LMFV 0 FT LMFV 40 FT LMFV 45 FT LMFV 50 FT LMFV 0 FT Multifunctional connector kg/00. Item No Multifunctional connector for joining cable ladders with a side height of 0. Syetric and asyetric reductions, bends between 0 0 and mounting/branch pieces can be created. 80
32 Side height 0 arrier strip TSG 85 DD arrier strip connector Plate Dimen- H sion L DD Strip galvanised zinc/aluminium, Double Dip arrier strip for separation of cables of different voltages or functions. TSGV VA40 V2A Stainless steel, grade 0 m 0 kg/00 m Item No kg/00. Item No arrier strip connector for screwless connection of the TSG barrier strip in all side heights. Hold-down clamp for barrier strip fastening KS KL VA40 V2A Stainless steel, grade 0 0 Hold-down clamp for screwless fastening of barrier strips in cable ladders. kg/00. Item No Slide nut ACMSN M ZL Length Width Height Thread.5 4 M 00 kg/00. Item No ACMSN M A4.5 4 M V4A Stainless steel, A4 ZL Zinc scale Slide nut for use with C0 profile rungs. Hexagonal bolt Resistance class d L SW SKS x0 A2 A V2A Stainless steel, A2 00 kg/00. Item No KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 2
33 R00 Side height 0 90 bend L R FT L 90 0 R FT L R FT L R FT L R FT L 90 0 R FT Connectors should be ordered separately and in the appropriate quantity. kg/00. Item No bend, heavy-duty SL 90 20R FT SL 90 0R FT SL 90 40R FT SL 90 45R FT SL 90 50R FT SL 90 0R FT SL 90 75R FT SL 90 80R FT SL 90 90R FT SL90 00R FT SL90 20R FT kg/00. Item No , , , , , R00 0 Connectors should be ordered separately and in the appropriate quantity KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 LAA 20 R FT LAA 0 R FT LAA 40 R FT LAA 45 R FT LAA 50 R FT LAA 0 R FT Connectors should be ordered separately and in the appropriate quantity. Mounting/branch piece kg/00. Item No R00
34 Side height 0 Mounting/branch piece, heavy-duty SLAA 20 R FT SLAA 0 R FT SLAA 40 R FT SLAA 45 R FT SLAA 50 R FT SLAA 0 R FT SLAA 75 R FT SLAA 80 R FT SLAA 90 R FT SLAA 00 R FT SLAA 20 R FT kg/00. Item No R00 Connectors should be ordered separately and in the appropriate quantity Tee for cable ladder LT 20 R FT LT 0 R FT LT 40 R FT LT 45 R FT LT 50 R FT LT 0 R FT Connectors should be ordered separately and in the appropriate quantity. kg/00. Item No Tee for cable ladder, heavy-duty SLT 20 R FT SLT 0 R FT SLT 40 R FT SLT 45 R FT SLT 50 R FT SLT 0 R FT SLT 75 R FT SLT 80 R FT SLT 90 R FT SLT 00 R FT SLT 20 R FT Connectors should be ordered separately and in the appropriate quantity. kg/00. Item No , , , , , , , , , KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 4
35 Side height 0 LGE 20 FT LGE 0 FT LGE 40 FT LGE 45 FT LGE 50 FT LGE 0 FT Adjustable bend element kg/00. Item No Adjustable bend element with welded rung for use in the cable ladder types with a side height of 0. LGE 20 FT LGE 0 FT LGE 40 FT LGE 45 FT LGE 50 FT LGE 0 FT Radius table Quantity of elements Radius approx approx. 450 approx approx approx. 900 Please order two LGVG 0 articulated connectors separately KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 s 5 Installation 5
36 Side height 0 Adjustable bend element, heavy-duty 0 s SLGE 20 FT SLGE 0 FT SLGE 40 FT SLGE 45 FT SLGE 50 FT SLGE 0 FT SLGE 75 FT SLGE 80 FT SLGE 90 FT SLGE 00 FT SLGE 20 FT Adjustable bend element, heavy-duty, with welded rung for use in the cable ladder types with a side height of 0. SLGE 20 FT SLGE 0 FT SLGE 40 FT SLGE 45 FT SLGE 50 FT SLGE 0 FT SLGE 75 FT SLGE 80 FT SLGE 90 FT SLGE 00 FT SLGE 20 FT KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 kg/ Item No Installation 5 Radius table Quantity of elements Radius approx approx. 450 approx approx approx. 900 Please order two LGVG 0 articulated connectors separately.
37 Accessories for side height 0, 0 KLL 2 FT Side height 2 0 Cable ladder clamping piece kg/00. Item No KLL 2 VA V2A Stainless steel, grade 04 eam clamp for fastening cable ladders to steel girders. KLL 52 FT Side height 52 0 Cable ladder clamping piece kg/00. Item No KLL 52 VA V2A Stainless steel, grade 04 eam clamp for fastening cable ladders to steel girders. LKS 40 FS 0 kg/00. Item No LKS 40 FT LKS 40 VA V2A Stainless steel, grade 04 FS Strip-galvanised Hold-down clamp for fastening cable ladders. LKS 0 4 FT 0 kg/00. Item No Hold-down clamp Hold-down clamp LKS 0 4 VA LKS 0 4 VA x 7 V2A Stainless steel, grade 04 V4A Stainless steel, grade Ti Hold-down clamp for fastening cable ladders KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 MAHL 200 FT MAHL 00 FT MAHL 400 FT MAHL 500 FT MAHL 00 FT Width On filling, please ensure an even load distribution (no one-sided filling). Centre suspension for cable ladder kg/00. Item No
38 Accessories for side height 0, 0 Centre suspension, universal MAHU 200 FS MAHU 00 FS MAHU 400 FS MAHU 500 FS MAHU 00 FS MAHU 200 FT MAHU 00 FT MAHU 400 FT MAHU 500 FT MAHU 00 FT Width kg/00. Item No FS Strip-galvanised Preferred use of this central suspension in combination with cable ladders and mesh cable trays. Universal central suspension for fastening to threaded rods and supports Slide nut ACMSN M ZL Length Width Height Thread.5 4 M 00 kg/00. Item No ACMSN M A4.5 4 M V4A Stainless steel, A4 ZL Zinc scale Slide nut for use with C0 profile rungs. Hexagonal bolt Resistance class d L SW SKS x0 A2 A V2A Stainless steel, A2 00 kg/00. Item No Support 7 x Support angle LAL 70 FS 20 kg/00. Item No LAL 70 VA V2A Stainless steel, grade 04 FS Strip-galvanised Support for fastening rising or falling cable ladders. LAW FT 0 Support bracket for creation of branches at different heights at a later date. kg/00. Item No KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 8
39 Accessories for side height 0, 0 LAL 20 FT LAL 0 FT LAL 40 FT LAL 50 FT LAL 0 FT Width Support plate to increase the cable volume and for cable protection SA20 FS SA0 FS SA40 FS FS Strip-galvanised kg/00. Item No Support plate Rung support plate for function maintenance kg/00. Item No Rung support plates to increase the support area for the cables in the fittings for routing types with cable ladders for function maintenance to DIN 402 Part 2. Use the support plates to ensure the largest possible support surface in the cable ladder fittings for the function maintenance cables in case of fire. The rung support plates are just laid loosely on the rungs of the cable ladder fittings. The lugs pointing down prevent slippage. Drop-out plate LA 20 FT LA 0 FT LA 40 FT LA 50 FT LA 0 FT Width Exit plate for installation on the rung for vertically exiting cables kg/00. Item No Corner plate 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 LE 25 FS LE 50 FS LE 25 DD LE 50 DD radius FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Corner plate to increase the radius and the cable supporting surface. kg/00. Item No a 9
40 Accessories for side height 0, 0 Insert plate EL-L 20 FS EL-L 0 FS EL-L 40 FS EL-L 50 FS EL-L 0 FS EL-L 20 DD EL-L 0 DD EL-L 40 DD EL-L 50 DD EL-L 0 DD Width Plate Length FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Insert plate for use in cable ladders. m kg/00 m Item No Truss-head bolt with flange nut FRS X0 F L D M x F Hot-dip galvanised Truss-head bolt with square neck including flange nut. 00 kg/00. Item No Cover DRL 200 FS DRL 00 FS DRL 400 FS DRL 500 FS DRL 00 FS DRL 200 FT DRL 00 FT DRL 400 FT DRL 500 FT DRL 00 FT DRL 200 DD DRL 00 DD DRL 400 DD DRL 500 DD DRL 00 DD Width Plate Length m FS Strip-galvanised DD Strip galvanised zinc/aluminium, Double Dip Transverse bead from 500 width. Cover for cable trays and cable ladders with three pairs of turn buckles. When using covers outdoors, additional measures against the influence of wind must be taken. kg/00 m Item No KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 40
41 Accessories for side height 0, 0 Cover for 90 bend LD R FS LD R FS LD R FS LD R FS LD R FS LD R FT LD R FT LD R FT LD R FT LD R FT LD R FT LD R FT LD R FT LD R FT LD RFT LD RFT LD R A2 LD R A2 LD R A2 LD R A2 LD R A2 LD R A4 LD R A4 LD R A4 LD R A4 LD R A4 Plate V2A Stainless steel, A2 V4A Stainless steel, A4 FS Strip-galvanised Cover with turn buckles for covering 90 cable ladder bends with welded rung. kg/00. Item No ,88.000, , Cover for add-on tee 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 LAAD 200 R FS LAAD 00 R FS LAAD 400 R FS LAAD 500 R FS LAAD 00 R FS LAAD 200 R FT LAAD 00 R FT LAAD 400 R FT LAAD 450 R FT LAAD 500 R FT LAAD 00 R FT LAAD 750 R FT LAAD 800 R FT LAAD 900 R FT LAAD 000 R FT LAAD 200 R FT Plate FS Strip-galvanised Cover with turn buckles for covering Add-on tee with welded rungs. kg/00. Item No
42 Accessories for side height 0, 0 Cover for Tee LTD 200 R FS LTD 00 R FS LTD 400 R FS LTD 500 R FS LTD 00 R FS LTD 200 R FT LTD 00 R FT LTD 400 R FT LTD 450 R FT LTD 500 R FT LTD 00 R FT LTD 750 R FT LTD 800 R FT LTD 900 R FT LTD 000 R FT LTD 200 R FT LTD 200 R A2 LTD 00 R A2 LTD 400 R A2 LTD 500 R A2 LTD 00 R A2 LTD 200 R A4 LTD 00 R A4 LTD 400 R A4 LTD 500 R A4 LTD 00 R A4 Plate V2A Stainless steel, A2 V4A Stainless steel, A4 FS Strip-galvanised Cover with turn buckles for covering T pieces with welded rungs. kg/00. Item No ,87.000, , , , Cover for articulated bend element LGED 200 FS LGED 00 FS LGED 400 FS LGED 500 FS LGED 00 FS LGED 200 FT LGED 00 FT LGED 400 FT LGED 450 FT LGED 500 FT LGED 00 FT LGED 750 FT LGED 800 FT LGED 900 FT LGED 000 FT LGED 200 FT Plate FS Strip-galvanised Cover with sash locks for covering articulated bends with welded rungs. Turn buckle DRLM DD 0 kg/00. Item No kg/00. Item No DRLM VA V2A Stainless steel, grade 04 DD Strip galvanised zinc/aluminium, Double Dip Use for cover widths of Turn buckle for additional installation or installation at a later date. 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 42
43 Accessories for side height 0, 0 Cover for stand-off mounting DRL FAM 20 FT DRL FAM 0 FT DRL FAM 40 FT DRL FAM 50 FT DRL FAM 0 FT DRL FAM 20 V2A DRL FAM 0 V2A DRL FAM 40 V2A DRL FAM 50 V2A DRL FAM 0 V2A DRL FAM 20 V4A DRL FAM 0 V4A DRL FAM 40 V4A DRL FAM 50 V4A DRL FAM 0 V4A Width Plate Length m kg/00 m Item No V2A Stainless steel, grade 04 V4A Stainless steel, grade Ti Spacers must be ordered separately under article number for cable trays and cable ladders and under article number for wide span systems. A cover length of meters requires 8 spacers. Cover for stand-off mounting. Not suitable for the vertical ladders SLM and SLS. When using covers outdoors, additional measures against the influence of wind must be taken Spacer Side height AH 5 VA40 5 V2A Stainless steel, grade 04 8 kg/00. Item No Spacers for stand off cover mounting on cable trays and cable ladders. Space height 5, stainless steel Earthing terminal 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 EKL 25 M8 L l Cross section SW ² Thread Accessories M8 With screw M8 x 0 50 CuZn rass Earthing terminal for fastening the equipotential bonding wire to the cable support system. kg/00. Item No
44 ack page OO ETTERMANN Order No. XXXXXXX 05/7 EN OO ettermann GmbH & Co. KG PO ox Menden, Germany Customer Service Germany Tel. +49 (0) Fax +49 (0) uilding Connections 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 44
Welded cable ladder system
Welded cable ladder system System information Pure OBO cable ladder competence Electricians have placed their trust in OBO Bettermann cable ladders for decades. The range stretches from riveted connections,
More informationCable ladder systems. 319 Fittings, side rail height 110 mm 320 Accessories for side rail height 45, 60, 110 mm. Hold-down clamps
Side rail height 45 Light-duty rung, cable ladder length 3.0 m, Rail thickness.25 Light-duty rung, cable ladder length 6.0 m, Rail thickness.25 Light-duty rung, cable ladder length 3.0 m, 306 308 Rail
More informationCable tray, unperforated, type SKSU, walkable and non-slip aluminium checker plate cover, barrier strip, 90 bend, add-on tee, fastening material
, nonslip Cable tray, type SKSU SKSU Side height: 60, 110 Surface: FS, FT Fittings: According to side heights Connecting parts According to side heights Classification According to DIN EN 61537 Optimised
More informationSolutions for the food industry
Solutions for the food industry OBO solutions for top quality and freshness Scarcely any other industry places quite so much emphasis on product quality as the food industry for many customers, only the
More informationJunction boxes. X series
Junction boxes X series X-TREME The new X series Extremely robust With the X series, OBO Bettermann can offer a range of junction boxes and empty housings that can withstand even the toughest mechanical
More informationVariety at OBO. Overview of junction boxes
ariety at OBO Overview of junction boxes ariety OBO junction boxes Large or small, classic or modern, for standard or special applications variety is at home in the field of OBO junction boxes. There s
More informationOverview of junction boxes
Overview of junction boxes ariety Staying young A series Classic and still youthful: The wellknown junction boxes of the A series have had a makeover. Halogen-free thermoplastic is just as much of a hallmark
More informationCable support systems
TS Catalogue 202/203 Cable support systems THIN CONNECTED. Welcome to Customer Service Service telephone: +49 (0)2373 89-500 Telefax for enquiries: +49 (0)2373 89-7777 Fax for orders: +49 (0)2373 89-7755
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More informationFireBox T series The evolution of electrical function maintenance
FireBox T series The evolution electrical function maintenance THINK CONNECTED. Basic principles and meaning electrical function maintenance Function Function maintenance for electrical systems Electrical
More informationWide-span cable ladder WP 60 Catalogue
WP 60 Catalogue PUK Benelux B.V. Meerheide 212 5521 DW Eersel The Netherlands Phone +31 497 534450 Fax +31 497 514502 Headquarters and plant Berlin Nobelstr. 45-55 12057 Berlin Germany Phone +49 30 68283-01
More informationCable ladder systems. Development and testing
Cable ladder systems Metsec cable ladder systems have been developed to provide cost effective solutions for the support of cables in a wide range of market sectors. These sectors include: * Coercial *
More informationComponents, Mounting Systems, In-roof PV Solutions FATH Solar About us Page 3
Important matters Brochure Content Components, Mounting Systems, In-roof PV Solutions FATH About us Page 3 S1 System S1: Half as Complex and Twice as Safe Page 4 S1: Pivotal Advantage for all Standard
More informationPRODUCT CATALOGUE - CABLE TRAYS
PRODUCT CATALOGUE - CABLE TRAYS 098711969 shivshaktiindustries.delhi@gmail.com S. S. Engineering, B-2621, DSIDC Complex, Narela Industrial Area, New Narela, Delhi-140 Table of Contents Perforated Cable
More informationAll good things come from above. VH and VHF power supply units for power and compressed air THINK CONNECTED.
All good things come from above VH and VHF power supply units for power and compressed air THINK CONNECTED. VH and VHF power supply units 2 OBO EGS All good things come from above Supply units for power
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More information3 Cable ladders Vergokan
Use of the specification text: The sign '#' marks a choice. Only one option can be selected. All the text that follows the mark and is marked in red comes with that same option. All Vergokan brand names
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationEZTray. Cable Management Made Easy
EZTray Cable Management Made Easy PRESENTATION Introduction:.................................. 3 EZ Tray: The Tray That Saves You Time!.............. 4-5 EZ Tray: The Innovative Cable Management Solution....
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationCable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
More informationSwifts SW strength, speed and flexibility
Swifts SW strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE Global vision... 21st Century solutions Established in the UK since 1972, Legrand is a world leading manufacturer of products
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationSECTION 2: Cable Tray
SECTION 2: Cable Tray Admiralty Pattern Tray Continuous Punch Cable Tray Light Duty Tray > 2:3 > 2:5 > 2:7 CT Heavy Duty Cable Tray Ladder Tray Ladder Tray Accessories > 2:10 > 2:13 > 2:15 Ladder Tray
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CLE MNGEMENT SOLUTIONS CTLOGUE2003/04 COMPLETE CLE MNGEMENT SOLUTION FOR COMMERCIL ND INDUSTRIL PPLICTIONS www.legrand.co.uk FSTRCK F31 FSTRCK F31 SYSTEM STEEL WIRE CLE TRY Legrand With a large range of
More informationSeries 3 & 4 Stainless Steel - Accessories
Splice Plates Standard 8-hole pattern for all stainless steel splice plates. One pair including hardware provided with straight section. Boxed in pairs with hardware. Expansion Splice Plates Expansion
More informationDemag portal cranes. Efficient solutions for numerous logistical tasks
Demag portal cranes Efficient solutions for numerous logistical tasks 39835-2 1 Demag a strong brand In Demag, Terex Corporation has a strong brand that stands for technologically outstanding products
More informationGuide-Rails: Vertical
For vertical application For fixing onto existing ladders or climbing irons. Comes with joint plate. Mounting brackets extra to order. Maximum mounting distance: 1680 mm. Installation of bracket to rail
More informationPerforma Mesh Trays. Flexible solution for the routing of cables
Flexible solution for the routing of cables Solutions for each application Performa is one of the most flexible solutions on the market for the routing of cables in light duty and medium duty installations.
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationHELM Hardware for Sliding Gates. Sliding hardware
HELM Hardware for Sliding Gates Sliding hardware HELM Hardware for Sliding Gates Contents General Information General Information Page 3 Hardware for Sliding Gates General Information, HELM 00 - HELM 700
More informationTHE NEW TS IT RACK 8
THE NEW TS IT RACK 8 Fast and reliable Fast Loosen the 48. (9 ) quickrelease fastener, slide into the correct position, and latch Reliable Maximum load capacity up to,000 N Convenience in perfection Interior
More information01 Product overview KT series order picking trolleys MultiPick trolley Pick and Pack Order picking container
01 Product overview 01.01 01.09 KT series order picking trolleys 01 KT1 02 KT2 03 KT3 04 KT4 05 KT DRIVE 06 KT3-KOMBI 07 KT ALU 08 KT-R 09 KT-B 01.10 MultiPick trolley 01.11 Pick and Pack 10 MULTIPICK
More informationFlatbed trailers and wheels-in trailers Tandem trailers and turntable trailers. Light professional trailers up to 3.5 t.
Flatbed trailers and wheels-in trailers Tandem trailers and turntable trailers Light professional trailers up to 3.5 t 2000 series 1 Allow us to convince you Our arguments make it easy for you to become
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
More informationENYSTAR Load Centers up to 250 A
PASSION FOR POWER. up to 250 A according to IEC 61439-3 for commercial and industrial buildings Download at www.hensel-electric.en made in GERMANY since 1931 up to 250 A according to IEC 61439-3 for commercial
More informationconnected to innovation
connected to innovation OMPRESSED IR NETWORKS, MPS ONEPT The MPS range MPS is a simple and reliable aluminium profile connection system for the installation of compressed air distribution networks. MPS
More informationWIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC.
CANADIAN ELECTRICAL RACEWAYS INC. WIRE BASKET TRAY Made of heavy-gauge zinc plated wire mesh, CER basket tray is ideal for your commercial or industrial cable management project. A full range of cable
More informationSTRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
More informationDATA SHEET 1 : 1 CABLE TRAY WITH LOCK. Type No. A 1 A1 1 A2 A3 B 2 B1 2 C D E F
DATA SHEET 1 : 1 CABLE TRAY WITH LOCK SILTEC cable tray with locking is a new, patented tray, in which you can sew wires and tubing in and out, without using tools and clips for fastening. This tray is
More informationSCHÄFER IT-Systems The specialists for IT infrastructure
SCHÄFER IT-Systems The specialists for IT infrastructure www.schaefer-it-systems.com 1 2 SCHÄFER IT-Systems The specialists for IT infrastructure SCHÄFER IT-Systems The specialists for IT infrastructure
More informationSwifts SW. strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE
Swifts S strength, speed and flexibility STEEL IRE CABLE TRAY / PRODUCT GUIDE Global vision... 2st Century solutions Established in the UK since 972, Legrand is a world leading manufacturer of products
More informationTHE NEW GENERATION OF WEDGE LOCKING WASHERS PRODUCT GUIDE - SOLID-LOCK WASHERS
THE NEW GENERATION OF WEDGE LOCKING WASHERS PRODUCT GUIDE - SOLID-LOCK WASHERS SAFE-BOLT IS PROUD TO PRESENT SOLID-LOCK WASHERS, REPRESENTING THE MOST ADVANCED AND EFFECTIVE WEDGE LOCKING SYSTEM, ENSURING
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationSteps for self-assembly 100 S C.08 Steps for self-assembly 100 L C.10 Steps for self-assembly 75 L C.12 Industrial ladders C.13
Step system Technical information Test marks Your Partner in matters of safety Founding member of the German Ladder and Mobile Scaffolding Association Founding member of the European Ladder Federation
More informationCONFIGURATION OF CABLE SUPPORT SYSTEMs
CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)
More informationEX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
More informationCable Ladder System for Ships
Cable Ladder System for Ships Our product range specially designed for installation in ships is available in two distinctive types: RZE-R is a cable ladder with a smart design which reduces the need for
More information0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table
Type overview FSR with guide cables or rods Type key FSR P S 0 0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table Cover panel without back-fold: S = small,
More informationGuide-Rails: Vertical
For vertical application For fixing onto existing ladders or climbing irons. Comes with joint plate. Mounting brackets extra to order. Maximum mounting distance: 1680 mm. Installation of bracket to rail
More informationbott vario Professional vehicle equipment for your Mercedes-Benz Estate cars Vito Sprinter
bott vario Professional vehicle equipment for your Mercedes-Benz Estate cars Vito Sprinter bott vario Feel at home in your Mercedes-Benz 2 You ve decided to get a Mercedes-Benz. In taking this decision
More informationFischerPANEEL. * An enterprise of Tata Steel
5 30 50 00 FischerPANEEL * An enterprise of Tata Steel FischerPANEEL Economical with versatile design possibilities FischerPANEELE are functional building elements for industrial, office and administrative
More informationguide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough
guide trough systems aluminium SuperTrough steel guide trough support tray guidefast guidelite tubular trough snap-in trough 682 683 Guide troughs Aluminium Steel Guide troughs Further trough systems The
More informationReinforced edge channels KE-100
Drainage with system Technical data sheet Reinforced edge channels KE-100 ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation
More informationProduct catalogue 2006
Product catalogue 006 welding, cutting and more www.kemper.de Protective welding equipment Welding curtains... 107-109 Welding strip curtains... 110-111 Welding protection strips... 11 Lateral sliding
More informationAluminium Productive Fence System 40 PRODUCT CATALOGUE
11 2017 (e) Aluminium Productive Fence System 40 PRODUCT CATALOGUE solutions by F.EE Elektrotech Engineering Automation Robotik Informatik + Systeme Energietechnik F.EE GmbH In der Seugn 10 and 20 D-92431
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Wilh. Schlechtendahl & Söhne GmbH & Co. KG
More informationROWEKO LOAD-SECURING EQUIPMENT
84 www.roweko.de Transportation tube for roof rack How long do you need to securely tie tubes or similar long goods onto your roof rack? How certain are you that you don t lose anything during your journey
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationMÜPRO. One-piece pipe clamps. Sprinkler pipe clamps. Refrigerant pipe clamps. Two-piece pipe clamps. Heavy-duty pipe support/din pipe clamps
0. MÜPRO 1. Vibration control 2. Fire protection 3. Pipe clamps 4. Support channels 5. Accessories 6. Anchor points/expansion points 7. Heavy-duty pipe support 8. MPT-Support system 9. Ventilation 10.
More information» Fermentation and storage barrel UF
» Fermentation and storage barrel UF Our fermentation and storage barrel UF can also be called universal barrel. Its use is really multifunctional. Mostly it is used for fermentation and storage, but also
More informationbott vario Professional vehicle equipment for your Peugeot Bipper Partner Expert Boxer
bott vario Professional vehicle equipment for your Peugeot Bipper Partner Expert Boxer bott vario Feel at home in your Peugeot 2 You ve decided to get a Peugeot. In taking this decision you have created
More informationRICHARD BERGNER ELEKTROARMATUREN GMBH & CO. KG
POWER 03 RIBE ELECTRICAL FITTINGS Own design & development Safety you can rely on: Our experienced engineers develop varied solutions that give you convincing reliability in everyday operation in any situation.
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 5 Structural Cable Ladder Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 5: Structural Cable Ladder
More informationBEVELGEAR. Competence and Performance.
MS-Graessner GmbH & Co. KG THE GEAR COMPANY BEVELGEAR Competence and Performance General Advantages of Spiral, Hypoid and Zerol Bevel Gears High level of coverage due to the fact that several teeth are
More informationLight Fitting Support
We offer a complete range of robust, cost-efficient lighting support equipment systems which are simple to install and suitable for any location. Our support system includes armature holders and cable
More informationWerra Steel Gates. - for ultimate adaptive security. Produced by elkosta.com
Produced by elkosta.com Werra Steel Gates - for ultimate adaptive security Werra dedicates all of its expertise to development, production and service. All its products are therefore state of art and are
More informationT&B Cable Tray. In this section...
In this section... T& Cable Tray T& Cable Tray Overview... -260-261 luminum Tray... -262-309 Steel Tray... -310-333 One-Piece Tray... -334-357 Channel Tray... -358-373 Common ccessories... -374-376 Grounding
More informationKT 2000 Small Crane Technology_
STAHL CraneSystems Lifting technology Drive technology Control technology KT 2000 Small Crane Technology_ optimised for every application KT 2000 Small Crane Technology from STAHL CraneSystems Experienced
More informationCeiling Slot Diffuser DSC
Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationINDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
More informationSeries 2, 3, 4, & 5 Aluminum - Straight Sections
- Straight Sections I-1 B-Line series Cable Tray Systems - Accessories For Aluminum Fittings see fittings section pages L-1 thru L-17 How The Service Advisor Works We know that your time is important!
More information7 Series Forklifts. Electric 2.2 to 3.5 ton capacity. Lifting Your Dreams
7 Series Forklifts Electric 2.2 to 3.5 ton capacity Lifting Your Dreams About Doosan Doosan Industrial Vehicle Values that drive our future growth Major global player in the infrastructure support business
More informationVarioFlow Lateral Guide Generation 2. Customer Presentation
VarioFlow Lateral Guide Generation 2 Customer Presentation Market Requirements Your requirements: A compact, clearly designed lateral guide system for numerous standard applications and customized solutions
More informationTelescopic slides. Customized solutions.
Telescopic slides. Customized solutions. Engineering for telescopic slides. For more than 40 years, Schock has been developing and manufacturing telescopic ball bearing slides in the field of linear motion
More informationMarine cable ladders. Marine cable ladders
386 This chapter contains an overview of the RICO marine for various loads and applications subdivided in product families. Content Table of content Page 40 mm side height 390 387 System overview cable
More informationCOMPRESSORS Air Receivers Volumes 90 10,000 l
Air Receivers Volumes 90 10,000 l www.kaeser.com Air receivers No leaks, no worries! KAESER: Your one-stop shop In fulfilling their storage and buffer functions, air receivers play a key role within a
More informationAir Receivers Volumes 90 10,000 l
Air Receivers Volumes 90 10,000 l Air Receivers One-stop shop In fulfilling their storage and buffer functions, air receivers play a key role within a compressed air station: they provide capacity during
More informationBulb flats For plate stiffening
Corus Special Profiles Bulb flats For plate stiffening Introduction Plate stiffening 2 Bulb flats Introduction Bulb flats are tailor made for plate stiffening applications. Their special shape provides
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationMOBILAIR M 20. Portable Compressor With the world-renowned SIGMA PROFILE Flow rate 2.0 m³/min (71 cfm)
MOBILAIR M 20 Portable Compressor With the world-renowned SIGMA PROFILE Flow rate 2.0 m³/min (71 cfm) www.kaeser.com MOBILAIR M 20 Lightweight Quiet Powerful The perfect energy-saving combination: a Kubota
More informationLouvre systems. Series WL Standard weather louvres. Incorporating. Standard range of single bank louvres as used in countless installations worldwide
Louvre systems Incorporating Series WL Standard range of single bank louvres as used in countless installations worldwide Good resistance to water ingress, with low resistance to airflow Approximately
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationSINgLE-AxLE TRAILERS SERIES TRAILERS RANgE UP TO 3.5 to. Illustrations may contain special equipment /
SINgLE-AxLE TRAILERS Illustrations may contain special equipment / products are subject to continuous technical modifications 1000 SERIES TRAILERS RANgE UP TO 3.5 to www.humbaur.com 1000 SERIES CONTENTS
More informationSeries 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
More informationHigh-Tech.Platform. The MODULOS Chassis for your Semi-Trailer.
High-Tech.Platform. The MODULOS Chassis for your Semi-Trailer. 2 New.Generation. The New MODULOS Chassis. With its frame of bolted galvanised parts, the MODULOS vehicle frame has long been something special.
More information10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
More informationTippers & Transporters
Multitalents up to 3.5 t Tippers & Transporters Rear and three-way tippers / Construction machine transporters HUMBAUR CAR TRAILERS 3000/3500 series humbaur.com 3000/3500 series Info Follow Humbaur! Because
More informationINTELLIGENT DRIVE SYSTEMS, WORLDWIDE SERVICES INTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES
INTELLIGENT DRIVE SYSTEMS, WORLDWIDE SERVICES INTELLIGENT DRIVESYSTEMS, WORLDWIDE SERVICES EN DRIVE SOLUTIONS FOR SEWAGE PLANTS NORD DRIVESYSTEMS Intelligent Drivesystems, Worldwide Services NORD DRIVE
More informationPower distribution components
Industrial electronics Power distribution components Reliable, cost-effective, complete R England sv_001.fm Rittal power distribution components Bar centre distance (mm) Number of poles Busbar dimensions
More informationTwinLine The new system of wall-mounting and floor-standing cabinets
04 2012 TwinLine The new system of wall-mounting and floor-standing cabinets 04 2012 TwinLine The new system of wall-mounting and floor-standing cabinets 2 2CPC 000 170 L0201 TwinLine The new system of
More informationPERFECTLY POSITIONED FOR ANY CHASSIS.
SUSPENSION SPRINGS PERFECTLY POSITIONED FOR ANY CHASSIS. Egon von RUVILLE GmBH Billbrookdeich 112 22113 Hamburg Germany Tel.: +49 40 73344-0 Fax: +49 40 73344-199 info@ruville.de www.ruville.de NEW IN
More informationDICTATOR Door Checks
DICTATOR Door Checks Ensure Doors to Close Quietly. Doors can be incredibly noisy. Not only when people slam them, but also due to air pressure, gusts of wind and inadequate door closers. The more violent
More informationLINEAR GUIDEWAYS BED TYPE MILLING MACHINES
LINEAR GUIDEWAYS BED TYPE MILLING MACHINES BT/ KT/RT LINEAR GUIDEWAYS BED TYPE MILLING MACHINES WE ARE A MID-SIZED COMPANY BECAUSE WE WANT TO BE We re big enough to develop innovative milling technologies
More informationADDER SYSTEM CABLE L
17 Introduction CALE LADDE The ICMS cable ladder system consists of a wide range of aluminum and Steel cable ladders, Fittings and accessories. Ladder Trays are available in two models: Tubular rungs mechanically
More informationACCESSORIES QUICK CONNECTOR COVER BRACKETS BARRIER CUSTOM TEES & CROSSES
ESSOIES QUIK ONNETO OVE KETS IE USTOM TEES & OSSES 548 Nicola Place Port oqutilam, V3 0K4 anada Direct Tel: 4-942-0050 Main Tel: 4-540-0011 Toll Free: 1-888-222-2633 Email: sales@codeelectric.com orderentry@codeelectric.com
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More information4 pole insulated conductor rails UNILIFT-ULA 35A, 50A, 80A, 100A
2 Table of contents General information... 4 Elements of the conductor rail supply line... 4 Innovative connection method... 5 Technical properties... 6 Construction of the line section... 6 Line section...
More informationLow voltage capacitors CLMD Improving power factor and enhancing power quality of your network
PRODUCT BROCHURE Low voltage capacitors CLMD Improving power factor and enhancing power quality of your network s.a. ABB n.v. Power Quality Products Allée Centrale 10 Z.I. Jumet B-6040 Charleroi (Jumet)
More information