Guide to Lighting Retrofit

Transcription

1 Guide to Lighting Retrofit LIGHTING COMPONENTS, INC. Strip Fixture Conversions Troffer and Surface Fixture Conversions New Technology Upgrades Replacement Plastics

2 Guide to Lighting Retrofit Strip Fixture Conversions Troffer & Surface Fixture Conversions New Technology Upgrades Replacement Plastics Dramatically expand the project scope with Advanced Retrofit Solutions from A.L.P. Lighting. Turn optical efficiency into bottom-line improvements. Maximize energy savings per investment dollar. Add cutting edge aesthetic design to existing facilities at a fraction of the cost of new fixture installation. Advanced Retrofit Solutions from A.L.P. Lighting it s just the beginning. Contact your representative for complete project development support. (877) A.L.P. Lighting Components, Inc., Printed in U.S.A., RETROGUIDE 0508

3 Getting Your Retrofit Right! Getting Your Retrofit Right! Lighting retrofit remains the most powerful energy conservation tool available to the industrial and commercial property owner or manager. Technology continues to speed ahead, delivering attractive paybacks in buildings constructed only a few years ago. A.L.P. s Advanced Technology Retrofit solutions expand the developer s palette to deliver energy performance and distinct aesthetic upgrades. It is now possible to update a building to tomorrow s standard optically, ergonomically and electrically at a fraction of the cost of a fixture replacement. We recommend following a few simple steps to improve the results of your project: Know Your Application: Note the typical fixture spacing and mounting height, along with the type of task performed in the space. A Picture is Worth 1000 Words: With the lamps turned off, photograph the fixture exterior and interior with a detailed image of the end of the fixture as well as the door frame latch and hinge. Add Fixture Type to the Lighting Survey: Clearing a path for many of the more advanced kits often requires the designer to differentiate between fixture types, even if they fit the same generic description. The best way to identify fixtures with generally similar characteristics is by noting the shape and location of the fasteners used to secure the door, louver or ballast cover. Custom Designs: Many solutions provided by A.L.P. are designed to fit a wide variety of fixture housings, but the more sophisticated the upgrade, the more likely a custom solution will be required. Following the steps above will help to define those applications that require custom designs. Custom designs are subject to a design fee and the product cost is often a function of the specific project quantity. Most custom design work will require the customer to submit a fixture from the project site. Visit us at for the latest product information.

4 For the most cost effective, easy-to-transport strip conversion, A.L.P. offers the CAS-Express. This simple kit upgrade provides tool-less maintenance. An ideal solution to the challenge of converting a strip fixture into the energy efficient lighting we need now. The CAS-Express fits all 4 to , 2 and 4 lamp strip fixtures and is in stock for pick up or delivery. CASEX 84LH Two 8' Lamps convert to four 4' T5 or T8 Lamps Features Ballast Cover pre-punched for quarter turn fastener Made from pre-painted white steel with 91% Reflectance Quality bi-pin lampholders provided with LH designation Benefits Provides easy method to upgrade existing strips No special tooling required Lampholder brackets and ballast cover assembled on site for ease of handling Meets U.L. #1598 standards Convert-A-Strip Configurations Order CASEX 82LH CASEX 82LH Two 8' Lamps convert to two 4' T5 or T8 Lamps Converts to Single Lamp T12 to Two T5 or T8 Lamps Order CASEX 84LH Converts to CASEX 41LH Two 4' Lamps covert to one 4' T5 or T8 Lamp Double Lamp T12 to Four T5 or T8 Lamps CAS Express Convert 1 or 2 Lamp 8 T12s to 4 T5s or T8s

5 CAS Express Convert 1 or 2 Lamp 8 T12s to 4 T5s or T8s Accessories Details RW 501 RW 501 RW 511 CATALOG NO. DESCRIPTION CASEX 82LH CAS EXP. T8 (2) 4' Lamp Tandem Includes (2) CASEXCOVER, (2) RW 501, (1) RW 511, (4) RQTF, (6) RA8, (4) lampholder Used as a Single Socket Used as a Double Socket Single Lamp Socket Plate CASEX 84LH CAS EXP. T8 (4) 4' Lamp Tandem Includes (2) CASEXCOVER, (2) RW 501, (1) RW 522, (4) RQTF, (6) RA8, (8) lampholder RW 522 RW 511T5 RW 502T5 CASEX 82LHT5 CAS EXP. T5 (2) 4' Lamp Tandem Includes (2) CASEXCOVER, (2) RW 502T5, (1) RW 511T5, (4) RQTF-S, (6) RA8, (4) lampholder CASEX 84LHT5 CAS EXP. T5 (4) 4' Lamp Tandem Includes (2) CASEXCOVER, (2) RW 502T5, (1) RW 522T5 (4) RQTF-S, (6) RA8, (8) lampholder Double Lamp Socket Plate Single Socket Plate for T5 Double or Single Socket Plate for T5 CASEX 86LHT5 CAS EXP. T5 (6) 4' Lamp Tandem Includes (2) CASEXCOVER, (2) RW 502T5, (1) RW 522T5, (4) RQTF-S, (6) RA8, (12) lampholder RW 522T5 RQTF-S RQTF CASEX 41LH CAS EXP. T8 (2) 4' Lamp Tandem Includes (1) CASEXCOVER, (2) RW 501, (2) RQTF, (4) RA8, (2) lampholder CASEX 41LHT5 CAS EXP. T5 (2) 4' Lamp Tandem Includes (1) CASEXCOVER, (2) RW 502T5, (2) RQTF-S, (4) RA8, (2) lampholder Double Lamp Socket Plate for T5 ¼Turn Fastener ¼Turn Fastener RAAC RA8 Alignment Clip Tek Screws Lamp Socket

6 Lampholders not included Center Cap To ensure proper enclosure is maintained, reuse existing ballast cover or mate this reflector with the CASEX assembly. Alignment Clip For 6' or 8' applications an optional alignment / filler is available. 1or 2 Lamp Standard 4-1/4" Socket Plate #RW 501 RA8 Tek Screw 2000 Series Reflector 2-Lamp Strip 2000 Series Reflectors are for maximizing light output from typical 2-lamp fluorescent strip lighting fixtures. They can be used to convert from 8' to 4' lamps by using our optional socket plates. Optional finishes are also available. They are designed and manufactured in compliance with U.L. Standards for retrofit reflectors. CATALOG NO. DESCRIPTION LENGTH RA 2002 RA 2003 RA 2004 RA 2006 (1) RA ' Reflector (Anodized), (4) TEK Screws (1) RA ' Reflector (Anodized), (4) TEK Screws (1) RA ' Reflector (Anodized), (4) TEK Screws (2) RA ' Reflector (Anodized), (8) TEK Screws (2) RAAC Alignment Clips, (1) RA 275 Center Caps 2' 3' 4' 6' RA 2008 ACCESSORIES RW 501 RW 511 RW 522 RAAC RA Series Reflector for Quick, Simple Retrofit of 2-Lamp Strip Fixture (2) RA ' Reflector (Anodized), (8) TEK Screws (2) RAAC Alignment Clips, (1) RA 275 Center Caps 1 Lamp Standard 4-1/4" Wide Socket Plate & (2) TEK Screws 1 Lamp Center Socket Plate & (2) TEK Screws 2 Double Lamp Canter Socket Plate (2) TEK Screws Clear Plastic Alignment Clip Center Cap Note: For Highly Reflective Aluminum, Delete Prefix "RA" and Replace with "RM" or for White Aluminum Delete "RA" and Replace With "RW". 8'

7 2000 Series Reflector for Quick, Simple Retrofit of 2-Lamp Strip Fixture Efficiency: RA: 86% Specular RM: 94% Specular RW: 90% Diffuse White 2" COEFFICIENTS OF UTILIZATION 8-9/16" CEILING CAVITY REFLECTANCE Room Cavity Ratio

8 RW 501 RW 501 RQTF RAAC 5000 Series Kit for Strip Lamps Convert 4-1/4 wide strip fixtures to 1 or 2 T8 lamps easily, quickly and economically.* Used as a Single Socket RW 511 Used as a Double Socket RW 522 ¼Turn Fastener Alignment Clip RA8 A.L.P. offers two outstanding reflector kits to retrofit 8 or 4 strip fixtures to more The 5000 efficient T8 lamps. Series Kit is a complete reflector system, including socket plates for lamp relocation, to provide maximum efficiency. Used to either improve the usable reflected light or to delamp fluorescent strip fixtures. This retrofit system allows for removal and discarding of the ballast cover, relocation of lamps, optimizing light output and reducing energy consumption to comply with utility rebate requirements. Designed and manufactured in compliance with U.L. Standards for retrofit reflectors. The 5000 Series is U.L. Classified as a ballast cover. Single Lamp Socket Plate CATALOG NO. RA 5108 (Kit) RA 5208 (Kit) INCLUDES * RA 5004 RW 501 RW 511 RW 522 Also: DESCRIPTION Double Lamp Socket Plate 5000 Series Reflector 5000 Series Reflector for Quick, Simple Retrofit of 2-Lamp Strip Fixture *Lamp Socket Tek Screws (1) 8' Lamp converts to (2) 4' T8 Lamps (Anodized Aluminum) (2) 8' Lamp converts to (4) 4' T8 Lamps (Anodized Aluminum) 4' Reflector (2 Per Kit) Single or Double Socket Plate (2 Per Kit) Single Lamp Center Socket Plate for RA 5108 (1 Per Kit) Double Lamp Center Socket Plate for RA 5208 (1 Per Kit) (6) TEK Screws, (4) 1/4 Turn Fasteners, (2) Alignment Clips (4) Lamp Sockets for RA 5108 or (8) Lamp Sockets for RA 5208 CATALOG NO. DESCRIPTION RA 5204 (Kit) (2) 4' Lamp converts to (1) 4' T8 Lamp (Anodized Aluminum) INCLUDES * RA ' Reflector (1 Per Kit) RW 501 Single or Double Socket Plate (2 Per Kit) Also: (4) TEK Screws, (2) 1/4 Turn Fasteners, (2) Lamp Sockets for RA 5204 Note: For Highly Reflective Aluminum, Delete Prefix "RA" and Replace with "RM" or for White Aluminum Delete "RA" and Replace with "RW".

9 5000 Series Reflector for Quick, Simple Retrofit of 2-Lamp Strip Fixture Efficiency: RA: 86% Specular RM: 94% Specular RW: 90% Diffuse White 2-1/4" 4-3/4" Includes double lamp center socket plate for converting two 8' lamps to four 4' lamps for Kit 5208 Use RW522 Includes single lamp center socket plate for converting a single 8' lamp to two 4' lamps for Kit 5108 Use RW /2" 9-1/4" COEFFICIENTS OF UTILIZATION Room Cavity CEILING CAVITY REFLECTANCE Ratio Includes two lamp end socket plates for converting two 4' lamp to single 4' lamps for Kit 5204 Use RW KIT Two 8' Lamps convert to four 4' T8 Lamps 5204 KIT Two 4' Lamps covert to one 4' T8 Lamp

10 Flexible: Engineered to upgrade most strip and industrial luminaires with either T5 or T8 lamps. Effective: Linear Acrylic Reflector combines precise reflection and refraction to manage brightness while delivering evenly distributed indirect illumination. Dramatically reduced contrast ratios and source brightness control improves visual performance. Efficient: Total luminaire efficiency exceeds 90%. Attractive: Virgin acrylic prism geometry adds sparkle to any application. The compound acrylic and high reflectance metal reflector system of the A.L.P. KC ACR Retrofit Kit delivers a new level of performance and control for open lamp luminaires. KC ACR Easy-Bracket Easy-to-Install Clip Efficiency: RA: 86% Specular RM: 94% Specular RW: 90% Diffuse White 4-ft Kits KCACR RMT8 1 KCACR RMT8 2 KCACR RMT5 1 KCACR RMT5 2 Tandem 8-ft Kits KCACR RMT8 1TAN KCACR RMT8 2TAN KCACR RMT5 1TAN KCACR RMT5 2TAN Acrylic Refractor Kit Only 1 Lamp T8 Acrylic / Miro Reflector Kit Incl (1) Reflector, (2) RW 501, (4) Clips, (2) Acrylic Refractors 2 Lamp T8 Acrylic / Miro Reflector Kit Incl (1) Reflector, (2) RW 501, (4) Clips, (2) Acrylic Refractors 1 Lamp T5 Acrylic / Miro Reflector Kit Incl (1) Reflector, (2) RWT5 501T5, (4) Clips, (2) Acrylic Refractors 2 Lamp T5 Acrylic / Miro Reflector Kit Incl (1) Reflector, (2) RWT5 501T5, (4) Clips, (2) Acrylic Refractors 2 Lamp Tandem T8 Acrylic / Miro Reflector Kit 4 Lamp Tandem T8 Acrylic / Miro Reflector Kit 2 Lamp Tandem T5 Acrylic / Miro Reflector Kit 4 Lamp Tandem T5 Acrylic / Miro Reflector Kit Incl (2) Reflector, (2) RW 501, (1) RW 511, (4) Clips, (2) Joiner Clips (4) Acrylic Refractors Incl (2) Reflector, (2) RW 501, (1) RW 522, (4) Clips, (2) Joiner Clips (4) Acrylic Refractors Incl (2) Reflector, (2) RW 501T5, (1) RW 511T5, (4) Clips, (2) Joiner Clips (4) Acrylic Refractors Incl (2) Reflector, (2) RW 501T5, (1) RW 522T5, (4) Clips, (2) Joiner Clips (4) Acrylic Refractors KCACR4 KCACR8 4-ft Acrylic Refractor with Clips 8-ft Acrylic Refractor with Clips (2) Acrylic side Panels, (4) Clips (4) Acrylic side panels, (4) Clips, (2) Joiner Clips Note: For Standard Specular Aluminum, Delete Prefix "RM" and Replace with "RA" or for Diffuse White Aluminum Delete "RM" and Replace With "RW". KC ACR Compound Acrylic Retrofit Solutions for T5 and T8 Strip / Industrial Retrofit Kit

11 KC ACR Compound Acrylic Retrofit Solutions for T5 and T8 Strip / Industrial Retrofit Kit KCACR RWT8 248 Lamps: (2) F32T8 / SP35 Linear Fluorescent Ballast: Sylvania QT2X32 T8/120 ISN-SC Candlepower Curve 90º KCACR RMT8 248 Lamps: (2) F32T8 / SP35 Linear Fluorescent Ballast: Sylvania QT2X32 T8/120 ISN-SC Candlepower Curve 90º 75º 75º ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE º 15º 30º 60º 45º ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE º 15º 30º 60º 45º COEFFICIENTS OF UTILIZATION COEFFICIENTS OF UTILIZATION Room Cavity CEILING CAVITY REFLECTANCE Ratio ITL Report Number ITL54967 CEILING CAVITY REFLECTANCE Room Cavity Ratio ITL Report Number ITL54966

12 Through the art of perforated metals and modern lines, these easy-to-install kits accommodate different mounting configurations, depending on your needs. No matter which model you choose, you are guaranteed a simple, beautiful and cost-effective solution with KC2100. KC2100 Series By choosing from reflector types and basket materials, the lighting designer controls the light intensity. The KC2100 Series can be used to retrofit a flush-mounted strip or a hanging strip. End view showing reflector configuration and lampholder location Accessories and Options: Perforated Basket Perforated metal reflectors and baskets are made of cold rolled steel treated with rust inhibitor. Perforated metal parts are post painted with a durable baked polyester powder coat. Each piece is formed by our state-of-the-art multi-radii machine Basket Options for consistency. Fine Fluted Basket The acrylic basket option provides greater light output while diffusing light for a glare controlled look. Consistency is the key to a quality design. Socket Conversion Kits Convert a 4-1/4' Strip Fixture into oneor two-lamp T8. 4' and 8' Kits available. Universal End Plate RW 501 Smooth White Lens Fine Fluted Lens Single Lamp Socket Plate RW 511 Note: All RW 501, RW 511 and RW 522 socket plates use slide-on lampholders. Do not use snap-in lampholders. KC2100 Series Urbanus Direct/Indirect for Strip Fixture Retrofit KC2100 Direct / Indirect Series Urbanus KC21WPRPB4 KC21WPRSWA4 KC21WPRFL4 KC21WPRPB8 KC21WPRSWA8 KC21WPRFL8 Accessories / Options KC21CRM KC2S4 KC2S8 White 4' Perf Reflector with Perf Basket Kit White 4' Perf Reflector with Smooth White Lens Kit White 4' Perf Reflector with Fluted Lens Kit White 8' Perf Reflector with Perf Basket Kit White 8' Perf Reflector with Smooth White Lens Kit White 8' Perf Reflector with Fluted Lens Kit Perforated Double Lamp Socket Plate RW 522 KC2100 Series Continuous Row Mount Kit 4' Socket Conversion Includes (2) Universal End Plates 8' Socket Conversion Includes (2) Universal End Plates, (1) 2-Lamp Center Socket Plate and (1) 1-Lamp Center Socket Plate

13 KC2100 Series Urbanus Direct/Indirect for Strip Fixture Retrofit KC21 WRFL4 Direct Luminaire Solid White Reflector 6" Wide Curved Linear Prismatic Lens Lamps: (2) F32T8 Rated Lumens: 2900 ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE COEFFICIENTS OF UTILIZATION CEILING CAVITY REFLECTANCE Room Cavity Ratio Candlepower Curve º 90º 0º 5º 15º 25º 35º

14 Through the art of perforated metals and modern lines, these easy-to-install kits accommodate different mounting configurations, depending on your needs. No matter which model you choose, you are guaranteed a simple, beautiful and cost effective solution with KC2200. KC2200 Series Sophisticated styling in an indirect luminaire. The KC2200 Series offers a wide, even, indirect illumination, providing extraordinary visual comfort in the contemporary open office environment, with styling to enhance a lobby or highlight a public area. Perforated reflector panels with soft white in-lay provide a distinctive, contemporary look and allow an identifiable source of light for visual comfort. Accessories and Options: Perforated Basket Perforated metal reflectors and baskets are made of cold rolled steel treated with rust inhibitor. Perforated metal parts are post painted with a durable baked polyester powder coat. Each piece is formed by our state-of-the-art multi-radii machine for consistency. End view configuration KC2200 Direct / Indirect Series Alveus KC22WIPB2 KC22WIPB4 KC22WIPB8 Accessories / Options KC22CRM KC2225 White 2' Indirect Perforated Basket Assembly KC2225 White 4' Indirect Perforated Basket Assembly KC2225 White 8' Indirect Perforated Basket Assembly KC2200 Series Continuous Row Mount Kit KC2200 Series KC2200 Series Alveus Direct/Indirect for Strip Fixture Retrofit

15 KC2200 Series Alveus Direct/Indirect for Strip Fixture Retrofit KC22WIPB4 Deep Luminous Indirect Suspension Kit Perforated Metal Housing Diffuser Liner Lamps: (2) F32T8 Rated Lumens: 2900 ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE COEFFICIENTS OF UTILIZATION CEILING CAVITY REFLECTANCE Room Cavity Ratio Candlepower Curve º 90º

16 KC2300 Series This graceful direct-indirect solution creates a bold luminaire, while providing a comfortable atmosphere. Wide winged reflectors effectively direct light, while adding a soft glow and presence to the fixture. A gentle up-lighting effect creates a distinctive look for task or general applications. Through the art of perforated metals and modern lines, these easy-to-install kits accommodate different mounting configurations, depending on your needs. No matter which model you choose, you are guaranteed a simple, beautiful and cost effective solution with KC2300. End view showing reflector configuration and lampholder location Accessories and Options: Perforated Basket Perforated metal reflectors and baskets are made of cold rolled steel treated with rust inhibitor. Perforated metal parts are post painted with a durable baked polyester powder coat. Each piece is formed by our state-of-the-art multi-radii machine for consistency. Fine Fluted Basket The acrylic basket option provides greater light output while diffusing light for a glare controlled look. Consistency is the key to a quality design. KC2300 Direct / Indirect Series Pegasus KC23WRW4PB KC23WRW4FL KC23WRW4SWA Accessories / Options KC2S4 KC2S8 Basket Options Smooth White Lens Fine Fluted Lens Perforated White 4' Direct / Indirect Reflector Perforated Basket Kit White 4' Direct / Indirect Reflector Fluted Lens Kit White 4' Direct / Indirect Reflector Smooth White Lens Kit 4' Socket Conversion Includes (2) Universal End Plates 8' Socket Conversion Includes (2) Universal End Plates, (1) 2-Lamp Center Socket Plate and (1) 1-Lamp Center Socket Plate 7.73 KC2300 Series Pegasus Direct/Indirect for Strip Fixture Retrofit

17 KC2300 Series Pegasus Direct/Indirect for Strip Fixture Retrofit KC23WRW4PB Deep Ceiling Mount Luminaire White Upper Reflector White Perforated Metal Basket Diffuser Liner Lamps: (2) F32T8 Rated Lumens: 2900 ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE COEFFICIENTS OF UTILIZATION CEILING CAVITY REFLECTANCE Room Cavity Ratio Candlepower Curve º º

18 7000V Series Reflector for Troffer and Surface Fixture Retrofit 7000V Series Reflector Kit is an economical one-piece reflector used to delamp fluorescent ceiling / grid troffers (included) to recenter lamps after delamping. This reduces energy, improves efficiency and keeps light loss to a minimum. The 7000V Reflector is designed and manufactured in compliance with U.L. Standards for retrofit reflectors. CATALOG NO. DESCRIPTION LENGTH RA 7014 Kit RA 7022V Kit RA 7024V Kit (1) RA 6014 Reflector for 1' x 4' Troffer, (2) RA 410 Socket Plates, (4) TEK Screws (1) RA 6022VT2 Reflector for 2' x 2' Troffer, (2) RA 400V Socket Plates, (4) TEK Screws (1) RA 6024VT2 Reflector for 2' x 4' Troffer, (2) RA 400V Socket Plates, (4) TEK Screws RA 7034V Kit (1) RA 6034V Reflector for 2' x 4' Troffer, (2) RA 400V-83L, 4 (4) TEK Screws NOTE: For Highly Relective Aluminum, Delete Prefix "RA" and Replace with "RM" or for White Aluminum Delete "RA" and Replace with "RW" V Series Reflector for Troffer and Surface Fixture Retrofit

19 7000V Series Reflector for Troffer and Surface Fixture Retrofit Efficiency: RA: 86% Specular RM: 94% Specular RW: 90% Diffuse White Assembly Detail Lampholders not included Socket Plate RA 400V Reflector RA 6024VT2 COEFFICIENTS OF UTILIZATION Room Cavity CEILING CAVITY REFLECTANCE Ratio CONTENTS: Reflector, 2 RA 410 Brackets, and 4 Tek Screws. NOTE: RA 7014 kits do not comply to UL guidelines as a suitable wireway cover. For Type II retrofit applications a ballast cover must be used. CONTENTS: 1 RA 6022VT2 or 6024VT2 Reflector, 2 RA 400V Brackets, and 4 Tek Screws CONTENTS: V Reflector, 2 RA 400V-T83L Brackets, and 4 Tek Screws. Lampholders not included Socket Plate RA 400V-T83L Reflector RA 6034V

20 No Measuring Kwik Change always fits perfectly Eliminates the hassle of mis-measured replacements No Cutting or Special Orders Kwik Change fits standard grid ceilings New Positive Latching Mechanism makes re-lamping easy Easy to Install without any special notching or custom installation. STEP 1: Remove old door frame containing diffuser and discard. Raise light fixture and shift to the side. Featuring a new Positive Latching Mechanism for easy re-lamping. The Kwik Change Steel Frame now has the option of installing a wire guard under the lens for maximum protection. Deep Kwik Change and Shallow Kwik Change are available. Replace Yellowing, Damaged or Glare Producing Lenses Easily with the Kwik Change Frame. CATALOG NO. DESCRIPTION KCPL1 14SPS Kwik Change with PL1 Specular KCPL1 22SPS Finish Parabolic Louver. KCPL1 24SPS 1/2" x 1/2" x 1/2" cell size. KCPL2 14SPS Kwik Change with PL2 Specular KCPL2 22SPS Finish Parabolic Louver. KCPL2 24SPS 1-1/2" x 1-1/2" x 1" cell size. KCPL3 14SPS Kwik Change with PL3 Specular KCPL3 22SPS Finish Parabolic Louver. KCPL3 24SPS 3/4" x 3/4" x 1/2" cell size. KCPL4 14SPS Kwik Change with PL4 Specular KCPL4 22SPS Finish Parabolic Louver. KCPL4 24SPS 3/4" x 3/4" x 1/2" cell size. KCPL5 14SPS Kwik Change with PL5 Specular KCPL5 22SPS Finish Parabolic Louver. KCPL5 24SPS 3/4" x 3/4" x 3/8" cell size. KCALP120 14CA Kwik Change with ALP 120 KCALP120 22CA Clear Prismatic Lens. KCALP120 24CA KCALP120 14CAWG Kwik Change with ALP 120 KCALP120 22CAWG Clear Prismatic Lens KCALP120 24CAWG and Wire Guard. STEP 2: Remove new Kwik Change inner door frame from outer Kwik Change frame. Place new Kwik Change outer frame on existing ceiling grid. STEP 3: Reach through open panel and replace light fixture on top of Kwik Change Retrofit System. Install door frame with lighting diffuser and louver in outer frame and close. Kwik Change Steel Frame An Instant Solution for Louver and Lens Replacement

21 Kwik Change Universal Adapter The Ultimate Solution for Fast Louver and Lens Replacement No Measuring No Cutting or Special Orders Easy to Install without any special notching or custom installation. (UA) Compatible Louver or Door T-Bar Universal Adapter (UA) Bracket Lamp No Need to Lift the Fixture Adapter brackets install without moving the existing fixture housing No disruption of ceiling tile or earthquake wires It does not get much faster Get the Facts Many A.L.P. louvers and RDI products available in optional Universal Adapter (UA) version. UA configuration suitable for use only with mating products with Universal Adapter (UA) designation. For use with 15/16 t-bar systems. For other application please consult factory. STEP 1: Insert UA bracket between T-Bar and Fixture. Secure with self tapping screw. STEP 2: Hang Louver, RDI or Lens frame by sliding into the track created in the Universal Bracket Bars. STEP 3: Slide louver to one end and swing up into closed position. Secure with cam latch. Universal Adapter (UA) Bracket T-Bar UA Symbol designates available in Universal Adapter version. PATENT PENDING

22 Aluminum parabolic deep cell louvers provide a uniform, high efficiency light condition. The Aluminum Kwik Change system satisfies most requirements where a deep cell is needed. When controlled low brightness is essential, you ll find that the Kwik Change system is the answer. The Kwik Change system is available in a choice of depths, 1-1/2, 2 or 2-5/8. It feature excellent V.C.P. (Visual Comfort Probability) and require minimum maintenance. The Kwik Change Aluminum Series adheres to strict fire and building codes and is constructed of top-grade aluminum. The Kwik Change system is ideal for use with static, air handling and heat transfer fluorescent lighting fixtures, high efficiency lighting needs, high ceiling applications and is perfect for either new or retrofit projects. To Order: Select description from each column. *Uses shallow Kwik Change Frame Louver Nominal Size Cells Material / Finish *SKC PLLA 1-1/2 deep Kwik Change Louver KC PLTA 2 deep Kwik Change Louver KC PLNA 2-5/8 deep Kwik Change Louver 14 1 x x x x x x 4 1 x Cell 2 x Cell 2 x Cell 1 x Cell 08 8 Cell Cell 2 x Cell Cell 2 x Cell Cell Cell Cell For optional finishes, change SSS in catalog number to: SPS for Specular Silver, BWE for Baked White Enamel, Shallow KC Deep KC Universal Adapter Box Flange Flat Flange Aluminum Parabolic Kwik Change Louvers

23 Aluminum Parabolic Kwik Change Louvers Standard Cell Configurations 2 x 2 Panel (3 x 3) 9 Cell 2 x 4 Panel (4 x 4) 16 Cell These and other special sizes and cellular patterns are available Lay-In Fixture Lighting Components 1. Ballast - High performance, solid state electronic ballast. 2. Lampholders - replaces broken or inoperative lampholders or for replacement when de-lamping. 3. Reflector - for 2, 3 or 4-lamp fixtures. Maintains or enhances the efficiency of a fixture when de-lamping or retaining lamps in an existing fixture. (2 x 6) 12 Cell (3 x 6) 18 Cell 1 x 4 Panel (4 x 6) 24 Cell (4 x 8) 32 Cell Lamps - T5, T8 or T12 Fluorescent lamps 5. Kwik Change System - allows changing a grid ceiling fixture from lens to contemporary parabolic louver without replacing the fixture. (Deep shown.) 6 6. PLLA Aluminum Parabolic Louver (6 x 13) 78 Cell (1 x 6) 6 Cell (1 x 8) 8 Cell (2 x 8) 16 Cell 6a 6a. PLNA Aluminum Parabolic Louver

24 1, 2 & 3 Lamp Options Available Specifications Optical Channel: Choice of aluminum parabolic baffles with high-side flange for maximum light and efficiency, parabolic baffles. Face Panel: Post-painted face plate for clean appearance. Custom baffle and perforation configurations available. Configurations: NEOLUX 1x4 1-LAMP (Custom only) Luminaire Type: Customized to fit most standard recessed 1' x 4', 2' X 2' or 2' x 4' luminaire 9" 24" NEOLUX 2x2 and 2x4 2-LAMP Fit our EL housing Dramatic Design & Energy Upgrade for 1x4', 2x2' & 2x4' fixture Provides excellent visual and optical performance Blade Options: Create specific shielding and efficiency performance with available blades. BCA3.156 Type D Vane HEM BACK PH58HC Type F Vane CONCAVE PB58HS Type F Vane STRAIGHT PH58HX Type F Vane CONVEX Lamps: 1, 2 and 3 T5 fluorescent. 24" NEOLUX 2x2 and 2x4 3-LAMP NeoLux Face and Baffle Assembly NLELT5222LSPS NEO-LUX 2x2 T5 2-lamp Specular Ass'y NLELT5223LSPS NEO-LUX 2x2 T5 3-lamp Specular Ass'y NLELT5242LSPS NEO-LUX 2x4 T5 2-lamp Specular Ass'y NLELT5243LSPS NEO-LUX 2x4 T5 3-lamp Specular Ass'y NeoLux Lamp Bracket and Ballast Cover Kit NLWK222 NEO-LUX EL Wiring Kit 2x2 T5 2-lamp NLWK223 NEO-LUX EL Wiring Kit 2x2 T5 3-lamp NLWK243 NEO-LUX EL Wiring Kit 2x4 T5 3-lamp NOTE: Most NeoLux conversion kits must be custom engineered to fit the application. NEOLUX T5 Direct Super Kit for 1x4, 2x2, 2x4 Recessed

25 NEOLUX T5 Direct Super Kit for 1x4, 2x2, 2x4 Recessed NeoLux 2x2 3-Lamp Miro 4 baffle blade D Lamps: F14T5/841 Rated Lumens: 1350 TYPE D BCA Candlepower Curve NeoLux 2x2 3-Lamp Miro 4 baffle blade F Straight Lamps: F14T5/841 Rated Lumens: 1350 TYPE F PB58HS Candlepower Curve ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE COEFFICIENTS OF UTILIZATION Room Cavity CEILING CAVITY REFLECTANCE Ratio Efficiency: 66% Shielding Angle: 34º COEFFICIENTS OF UTILIZATION Room Cavity CEILING CAVITY REFLECTANCE Ratio Efficiency: 77% Shielding Angle: 32º

26 Specifications Door Frame: Frameless box flange can be configured to most hinge or latch locations. Features positive latching mechanism for easy re-lamping. Door frame, deep kwik change and flange version are available. Baffles: Precision parabolic blades available in any of our standard finishes. Perforated Diffuser: Post painted white perforated metal diffuser is roll-formed for precise radius. White acrylic inlay. Luminaire Type: Recessed 2 X 2' or 2 x 4' for deep cell parabolic. Replaces 18 cell or 9 cell nominal 3" deep parabolic louver. Also available with Kwik Change door frame for shallower fixture bodies. Lamps: 2 or 3-lamp T8, Biax, or T5 fluorescent. Update the look of any 2 x 2 or 2 x 4 Deep Cell Housing with the contemporary appearance of a recessed direct/indirect luminaire Versatile Design - Fits most Recessed Fixtures* Balanced illumination from the combination of Direct and Indirect elements Kwik Change RDI Basket and Baffle Assembly RDIKC22SSS RDI Kwik Change 2x2 with Specular Baffle Ass'y RDIKC24SSS RDI Kwik Change 2x4 with Specular Baffle Ass'y RDIUA22SSS RDI Universal Adapter 2x2 with Specular Baffle Ass'y RDIUA24SSS RDI Universal Adapter 2x4 with Specular Baffle Ass'y RDI Lamp Bracket Reflector or Ballast Cover Kit RDIWK222L RDIWK223L RDIWK242L RDIWK243L RDI Wiring Kit 2x2 T8 2 Lamp RDI Wiring Kit 2x2 T8 3 Lamp RDI Wiring Kit 2x4 T8 2 Lamp RDI Wiring Kit 2x4 T8 3 Lamp *For custom door frame, contact customer service RDI 2x2, 2x4 for Recessed Direct / Indirect

27 RDI 2x2, 2x4 for Recessed Direct / Indirect RDI T8 3-lamp 2x4 Direct / Indirect Luminaire Specular Baffle White Overlay Lamps: (3) F32T8 Rated Lumens: Candlepower Curve 0-Deg: 45-Deg: 90-Deg: 90º 75º Assembly Detail EL Series 2x2 Recessed Troffer 60º 1100 Wiring Kit 45º Deep Kwik Change 1650 COEFFICIENTS OF UTILIZATION Room Cavity CEILING CAVITY REFLECTANCE º 15º 30º Ratio RDIKC22SSS

28 Elegant Design: The RDI AC provides the look and feel of a deep RDI luminaire -- subtle soft indirect elements, interest and depth across the ceiling plane -- with a kit that consumes minimal space and material. Efficient Solution: The contoured panels of the unit are high transmission acrylic that provide a low-brightness glow, with the majority of the light controlled through the center baffle element. Typical Deep Housing Typical Shallow Housing Typical Shallow Housing End view showing reflector configuration and lampholder location Specifications Door Frame: Frameless box flange can be configured to most hinge/ latch locations. Features positive latching mechanism for easy relamping. Flanged version available for standard and narrow door frame insertion. KC framed versions available. Direct Optical Component: Precision parabolic blades available in any of our standard finishes or perforated basket version. Diffuser: (2) White frosted acrylic diffuser panels Reflector: Multi-radii high reflectance white reflector distributes light through the acrylic diffusers eliminating lamp imaging and providing low-brightness glow. Luminaire Type: Customized to fit most standard recessed lensed or parabolic housings 2x2' and 2x4' Lamps: 1, 2 or 3-lamp T8, Biax, or T5 fluorescent wiring kits available. Acrylic RDI RDIAC22SSS-SK RDIAC24SSS-SK 2x2 Acrylic RDI w/baffle - Shallow KC Frame 2x4 Acrylic RDI w/baffle - Shallow KC Frame RDIAC22SSS-UA 2x2 Acrylic RDI w/baffle - Universal Adapter RDIAC24SSS-UA 2x4 Acrylic RDI w/baffle - Universal Adapter Reflector Option RDIARK222LT5 AC RDI Wiring Kit and Reflector 2' 2L T5 RDIARK222LT8 AC RDI Wiring Kit and Reflector 2' 2L T8 RDIARK221LT5 AC RDI Wiring Kit and Reflector 2' 1L T5 RDIARK221LT8 AC RDI Wiring Kit and Reflector 2' 1L T8 RDIARK242LT5 AC RDI Wiring Kit and Reflector 4' 2L T5 RDIARK242LT8 AC RDI Wiring Kit and Reflector 4' 2L T8 RDIARK241LT5 AC RDI Wiring Kit and Reflector 4' 1L T5 RDIARK241LT8 AC RDI Wiring Kit and Reflector 4' 1L T8 For Deep Cell Parabolic Reflector Option add (DC) to part number RDIARK222LT5-DC. Acrylic RDI Retrofit Option for 2x2, 2x4

29 Acrylic RDI Retrofit Option for 2x2, 2x4 RDIAC24SSS-SD Direct / Indirect Luminaire Specular Baffle Acrylic HT Side Lens Lamps: (2) F32T8 Rated Lumens: 2900 ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE Candlepower Curve 1000 COEFFICIENTS OF UTILIZATION CEILING CAVITY REFLECTANCE Room Cavity Ratio

30 Elegant Design: The RDIAC HT provides the look and feel of a deep RDI luminaire subtle soft indirect elements, interest and depth across the ceiling plane with a kit that consumes minimal space and material. Efficient Solution: The contoured panels of the louver are high transmission acrylic that provide a low-brightness glow, with the majority of the light controlled through the center optical element. End view showing reflector configuration and lampholder location Specifications Door Frame: Frameless box flange can be configured to most hinge/ latch locations. Features positive latching mechanism for easy re lamping. Flat Flange version, to fit existing door frames, and shallow KC lift kit options also available. Direct Optical Component: High reflectance optical engine delivers main beam focus through the revolutionary Dur-iFlex HT diffusing panel. With 93% transmission and 89% haze, the result is extraordinary control and efficiency. Diffuser Surround: (2) Sloping high transmission acrylic diffuser panels manage contrast and generate soft, even, higher angle luminance. Reflector: Multi-radii high reflectance white reflector distributes light through both optical elements. Luminaire Type: Customized to fit most standard recessed lensed or parabolic housings 2X2' and 2X4' Lamps: 1, 2 or 3-lamp T8 or T5 fluorescent wiring kits available. Kwik Change RDI Basket and HT Assembly RDIAC22HT-SK 2x2 Acrylic RDI w/duri-flex HT - Shallow KC Lift Kit RDIAC24HT-SK 2x4 Acrylic RDI w/duri-flex HT - Shallow KC Lift Kit RDIAC22HT-UA 2x2 Acrylic RDI w/duri-flex HT - Universal Adapter Kit RDIAC24HT-UA 2x4 Acrylic RDI w/duri-flex HT - Universal Adapter Kit Reflector Option RDIARK222LT5 AC RDI Wiring Kit and Reflector 2' 2L T5 RDIARK222LT8 AC RDI Wiring Kit and Reflector 2' 2L T8 RDIARK221LT5 AC RDI Wiring Kit and Reflector 2' 1L T5 RDIARK221LT8 AC RDI Wiring Kit and Reflector 2' 1L T8 RDIARK242LT5 AC RDI Wiring Kit and Reflector 4' 2L T5 RDIARK242LT8 AC RDI Wiring Kit and Reflector 4' 2L T8 RDIARK241LT5 AC RDI Wiring Kit and Reflector 4' 1L T5 RDIARK241LT8 AC RDI Wiring Kit and Reflector 4' 1L T8 For Deep Cell Parabolic Reflector Option add (DC) to part number RDIARK222LT5-DC. RDI AC HT Retrofit Option for 2x2, 2x4

31 RDI AC HT Retrofit Option for 2x2, 2x4 RDIACHT24-SD Direct / Indirect Luminaire Duri-Flex HT Acrylic HT Panels Lamps: (2) F32T8 Rated Lumens: 2900 ZONAL LUMEN SUMMARY ZONE LUMENS %BARELAMP %LUMINAIRE Candlepower Curve 1000 COEFFICIENTS OF UTILIZATION CEILING CAVITY REFLECTANCE Room Cavity Ratio

32 LexaLite offers a full range of replacement lenses: Injection molded Acrylic or Polycarbonate Open and closed Variety of light distributions Superior materials 800 Series Prismatic Reflexor 12, 16, 22 diameter Series I43 Molded Lenses Series I33 HID Refractors Full product details and other product options for LexaLite products are available on our web site: Model 310 and 320 Cobra Head Refractors 200 Series Dusk-to-Dawn Refractors Model 120 and 121 Tear Drop Refractors 500 Series Threaded Globes Replacement Lenses Replacement Lenses Lenses for Indoor and Outdoor Applications

33 Replacement Lenses Replacement Lenses Lenses for Indoor and Outdoor Applications The Lindy Prismatic Globes Save Money! The Lindy post top components from LexaLite offer state-of-the-art prismatic design for street and area lighting applications. Perfect for new construction or replacement projects in downtown, campus, park or residential areas, it features unmatched performance. High performance optics and materials dramatically improve fixture efficiency Better optics require much lower wattage lamps Smart design reduces light pollution dark sky compatible. LexaLite globes last several times longer than blow molded acorns 10 year warranty on acrylic versions 23 The Lindy poles Take a closer look at the performance of the Lindy versus blow molded acorns: Blow molded acorns send more light upward than downward. The Lindy s prisms direct the light downward, right where you need it Max Candela 1445 Max Candela 19 Little Lindy 8-19 poles The Lindy Uplight/Downlight: 67%/15% Efficiency: 81% Dark Sky Compatible 10 Year Warranty Optically Stable Typical Blow Molded Globe Uplight/Downlight: 46%/45% Efficiency: 42% Light Polluting No Warranty Yellows Quickly Please visit for complete details.

34 Para-Lite 2 Para-Lite 3 Para-Lite 5 Plastic Parabolic louvers represent the most sophisticated and optically precise control media available. The advanced design concepts and technology produce controlled lighting of unparalleled visual comfort and efficiency. The shape of the vertical cell walls acts as a small reflector, directing all light into a task area. Para-Lite 1 Shielding Angle 31º V.C.P..93 Efficiency 51.9% 1-1/2" x 1-1/2" x 1" section 1-1/2" Para-Lite 4 1" 3/4" x 3/4" x 1/2" section PL3 HIGH EFFICIENCY Shielding Angle 35º V.C.P..93 Efficiency 66.3% 3/4" Double Wedge Design Hexabolic 2 1/2" PL5 HIGH EFFICIENCY Shielding Angle 28º V.C.P..88 Efficiency 70.2% 3/4 x 3/4 x 3/8 section 3/4 3/8 Deco-Round 33 Para-Lite 1 Style 2 To Order: Select description from each column and include options if applicable. Louver Nominal Size Style Para-Lite 1 1/2"x1/2"x1/2" Para-Lite 2 1/2"x1/2"x1" Para-Lite 3 3/4"x3/4"x1/2" Para-Lite 4 3/4"x3/4"x1/2" Para-Lite 5 3/4"x3/4"x3/8" 14 1 x x x " x 0.64" x 0.38" Shielding Angle 43º V.C.P..99 Efficiency 46.2% section 0.64" Style 1 (Fixture Style) 2x4 O.D.22-1/2" x 46-1/2" I.D /16" x 43-1/2" Style 2 (Ceiling Style) 1x4 11-3/4 x 47-3/4 2x2 23-3/4 x 23-3/4 2x4 23-3/4 x 47-3/4 0.38" Shielding Angle 33º V.C.P..92 Efficiency 53.3% 3/4" x 3/4" x 1/2" section 3/4" Material / Finish SPS Specular Silver, Polystyrene SPG Specular Gold, Polystyrene, Durabolic SSS Semi-Specular Silver, Polystyrene DSPS Durabolic Specular Silver, Polystyrene 1/2" Shielding Angle 40º V.C.P..99 Efficiency 48.9% 3/4" x 3/4" x 1/2" section 3/4" 1/2" Shielding Angle 45º V.C.P..87 1" Cone in 1-5/16" Cube Fabrication Options CUT Cut to Size AN Avoida-Notch Framing Note: Cut to Size - on Cut to Size orders O.D. must be provided. Cut to Size louvers must be able to fit directly into the doorframe. Note: Avoida-Notch - O.D. must be provided. Avoida- Notch to be used when louver cannot fit into the door frame (for Style 2 only.) Replacement Plastics Replacement Plastics Louvers for Quick, Simple Retrofit of Grid Ceiling Fixtures

35 Replacement Plastics Replacement Plastics Lenses and Wraparounds for Quick, Simple Retrofit Standard Wraparounds We extrude our own wraparounds and have thousands of molds to fit your fixture. Benefits: DR/Virgin Acrylic polymer blend Precision molding dies No variation in lens thickness Consistent size and weight Better quality Competitively priced Local availability Lenses and Diffusers A.L.P. Lighting offers a complete line of plastic lenses and diffusers. A variety of material including acrylic, polycarbonate, and polystyrene are available. A.L.P. provides standard and specialty patterns and thicknesses for any application. ALP 1 Cracked Ice A (thickness):.08" ALP 15 Female Conical Prismatic A (thickness):.200" A A ALP 12/120 Female Conical Prismatic A (thickness):.100",.110",.125" ALP 19 Male Conical Prismati c A (thickness):.156",.187" A A For an accurate drawing, Trace and Fax forms are available. Contact A.L.P. Customer Service. How to Order Wraparounds 1) Remove old wraparound lens or diffuser from fixture. 2) Use A.L.P. graph paper, place the old wraparound on its end. 3) Trace the end shape, being sure to draw both the inside and outside of the lens or diffuser. 4) Measure overall length of lens or diffuser - EXACTLY. 5) Send or give exact measurements and originals to your distributor with purchase order, quantity and type of plastic. 1. Remove the Diffuser. 2. Trace the End of Lens. 3. Measure the Length. ALP 52 Frost Overlay A (thickness):.045" 1/2" x 1/2" x 1/2" 1/2" x 1/2" x 3/8" 1/2" section 1/2" A ALP SW Smooth Flat Sheet A A (thickness):.040",.060",.080",.125" Plastic Eggcrate Finishes: Available in Translucent, White, Black and Metalized Finishes Materials: Polystyrene and Acrylic Stock Size: 23-3/4" x 47-3/4" 1/2" 3/8"