Collective Sale of Combine, Tractors, Plant, Vehicles, Machinery and Spares

Transcription

1 Auctions Collective Sale of Combine, Tractors, Plant, Vehicles, Machinery and Spares Saturday 21st October 2017 Sale One commencing at 9.30am Sale Two commencing at 10.00am Clarke & Simpson Auction Centre, Campsea Ashe, Nr Wickham Market, Suffolk. IP13 0PS Viewing: Friday 20th October from 2.30pm to 5.30pm and on the morning of sale from 8am Lot 1100 Lot 1035 Lots 1062 & 1063 Lot 1000 Live online bidding at both sales available via Tea Shop open for refreshments on viewing and sale days Free on site parking available Clarke and Simpson Well Close Square Framlingham Suffolk IP13 9DU T: F: And The London Office 40 St James Street London SW1A 1NS

2 IMPORTANT NOTES: Please refer to Terms and Conditions of sale to be found at the rear of the catalogue. Timing Sale One will commence at 9.30am promptly and Sale Two at 10am; both sales will run concurrently. Although the first numbered lot is 701, the list below is purely indicative and some lots may be divided or combined. Accordingly, please telephone or the auctioneers the day before the sale for a better idea regarding timing. Value Added Tax The symbol * after any description indicates that Value Added Tax is payable by the buyer on the hammer price. Buyer s Premium The following buyer s premium will be added to the hammer price: Sale 1-15% plus VAT Sale 2 - Lots up to % plus VAT Lots from 201 to % plus VAT Lots from 1,001-3% plus VAT with a maximum of 1,500 plus VAT per lot. Collection There will be Teleporters available for loading on the sale day, Sunday 22nd October 8am - 3pm and Tuesday 24th October 8am - 4pm, thereafter strictly by appointment. There will be no loading or collection available on Monday 23rd October. Any lots too large to be loaded by the Teleporters are the responsibility of the purchaser. All lots must be removed by 4pm Thursday 26th October and attention is drawn to item 26 under the Terms and Conditions at the rear of the catalogue. Enquiries Please direct all specific enquiries to:- James Durrant Kelvin Grimes Keith Gray Live on-line bidding is available via i-bidder.com. Prior registration is necessary. Please visit for more information. Any purchases made via i-bidder.com shall be subject to an administration charge of 1% plus VAT on the hammer price. Please refer to the Conditions of Sale at the rear of this catalogue for further detail. Foreword The sale comprises some 1000 lots from farmers throughout East Anglia. As part of the auction, there are significant consignments from P Hutchinson & Son following retirement and sale of the farms and PM and R Wright, who are retiring from farming. A large number of lots have also been entered by the Executors of D J Sale One - Commencing at 9.30am Models Ertl 1/16 John Deere 9200 tractor with triple wheels. UH 1/32 MF 8690 White limited edition tractor. Ertl 1/32 Steiger KM 280 tractor. UH 1/32 Massey Ferguson 7495 blue limited edition tractor. SIKU 1/32 New Holland T8.390 Black Line limited edition tractor. Ertl 1/32 Case/IH 5120 Maxxum tractor. Britains 1/32 New Holland T th anniversary edition tractor.* Ertl 1/32 New Holland T8.420 tractor with dual wheels.* UH 1/32 McCormick MC130 tractor.* UH1/32 Case/IH 5150 Maxxum black limited edition tractor.* UH 1/43 Field Marshall tractor.* Ertl 1/32 Massey Ferguson 1805 tractor with dual wheels.* UH 1/16 David Brown 995 tractor.* Case/IH 1/32 MX135 black edition tractor.* Siku 1/32 Case/IH Quadtrac 600 dirty limited edition.* UH/1-32 Valtra C series tractor.* UH 1/32 Ford 7810 Jubilee edition tractor.* Ertl 1/32 John Deere 9530 tractor.* UH 1/16 David Brown 950 tractor.* UH 1/16 Fordson Dexter tractor.* Bruder 1/16 Cat telehandler.* UH 1/16 Case/IH 1455XL black limited edition tractor.* UH Ford 7810 chrome limited edition tractor.* Britains 1/32 John Deere 3650 tractor.* Various play-worn Britains farm toys. Literature Various manuals to include Ford and Claas. Two folders of Old Glory magazines. Bobcat T190 skid steer service manual. International Super BM/BW6 tractor service manual. International BTD6 crawler service and parts manuals. Case/IH combine parts catalogues, x3. IH tractor parts catalogues, x3. Deutz combine parts catalogues. Hardi sprayer parts catalogues. Bobcat 325/328 excavator service manual. Case Construction history book. Box of miscellaneous books.

3 International B64 Harvester Thresher parts catalogues, x2. International B450 tractor parts catalogue. Case Uniloader 1818/1825 skid steer parts catalogue, x2. New Holland TF42/44 combine training manual.* Range Rover parts catalogue and manual. Miscellaneous Wheel changer.* Fergy loader brackets and wheel centre. Large quantity of Internation linkage sapres, draw bars etc. Unused Fordson Major steering column shaft, Major fuel tank and fly wheel. Set of heavy duty 8ft ramps. Big Brute vacuum cleaner.* 2x axle stands. Quantity of towing strops. Bench vice. 3x large lorry tilts. 5x traffic signs. Quantity of traffic cones. 2x rabbit cages. 6x 56lb weights. 210 electric welder. 2x 1000l IBCs. Self propelled lawnmower. Electric workshop hoist. Ferguson lower dash, battery frame, air filter etc. Lucas distributor and coil for Ferguson tractor. Flat drive belt mm long. Various road forms.* Dirty water pump.* Various drainage pipes.* Various reclaimed oak.* Wooden trailer sides.* Farm made wheel changer.* John Deere JS636 commercial pedestrian mower.* Coventry Climax auxiliary fire pump. Ex-1962 Bedford TK fire engine. 2 wheel feed barrow. Round feed bin with lid. 3x hanging chicken feeders. 2x chicken feeders on legs. Pig weighing crate. Calf dehorner. 2x bundle electric fence stakes. Unused roll of stock fencing. 5x plastic 20l fuel cans. 2x sheep troughs. Stihl chainsaw. 2.4mm x 15m Strimmer line.* Kverneland reversible plough points - 5LH and 5RH and bolts.* Box of 50 Maxi blade fuses.* Box of 600 UNF nuts.* 10kg Cleaning rag.* Toro Turfmaster 76cm pedestrian mower. Model no TE. Ehrle 3 phase cold water pressure washer. Thermobile TA80 paraffin space heater. Andrews gas fired space heater. Nutool vacuum MC202 sawdust collector m3 per hour. Zenoah Komatsu 6ft hedge trimmer with spare engine and pole. Zenoah strimmer. 8 section scaffold tower. 2x storage boxes of assorted large wheel bearings. 2x storage boxes of small wheel bearings. 2x plastic crates of bulbs and lights. 1x plastic crate of exterior flood lights. 1x plastic crate of interior coloured and clear bayonet light bulbs. 3x buckets of fencing wire strainers. Large quantity of workshop dump bins and wall racking - Maxibi/Metabin/Barton. Calor Comet MK 4 propane workshop heater. 2x 9mm 60ft wire rope with crimped loops. 2x chain load binders with lockovers. 6.5 KW petrol generator. Ratchet levers hoist kg. Toolzone 2T cable puller. Pump up pallet truck.* 3x 8ft Shallow feed/water troughs.* 2x plastic water tanks.* 2x 5 section 4ft pig troughs.* 3x hanging troughs.* 8m x 6m Tarpaulin.* 2x 6ft9" section pig troughs.* Feed barrow.* Feed barrow.* Centre partition for Ifor Williams horse trailer.* Quantity of Cock Pheasant hay turner tines.* Fordson Major belt pulley. David Brown PTO belt pulley. Tarpen hedge cutter. Merry tiller plough and weight. Tractor air seat compressor and bag. Power hacksaw manufactured by Peerless Machine Co, USA. 240V. 14" blade. Quantity of spares for Standen Big Boy potato planter.* Outback S GPS light bar system with dome.* Petrol multitool with chain saw, strimmer, hedge cutter and bushwhacker. Honda generator. 4x rolls barbed wire. Fuel delivery gauge. Waste oil tank with delivery pump. Pillar drill. Various concrete breaker points. Various SDC max drill bits. Roll of pig wire. Assortment of hydraulic rams. MF trailer pick up hooks. Floor standing vice. Twin wheel trailer mud guards.

4 2x Jerry cans. Steel towing bond. Oxyacetylene pipes. Howard 300 rotavator. Multivac sweeper/blower/shredder. Carpenter's vice. 3x roof rails to fit Peugeot Partner van. Karcher pedestrian concrete floor sweeper. Kango 240V breaker and one for spares. Stanley hydraulic power pack with breaker and hoses. Key to Makita petrol cut off saw. Robin petrol wacker plate. Lead welding torch, regulators and bottle cradle. 2x lintels. 4x sheets 6" Celotex. 18" cupboard door. Howdens kitchen wall unit (unused) Cooker splashback (unused). Slate half tiles. Velux flashing kit. Various kitchen fittings. Various unused wall and floor tiles. Expansion joint foam. Pair of trailer ramps. 4x gas bangers.* Oxford 250 amp welder.* Truecraft air compressor.* 3 bay pallet/workshop racking with mesh shelves. Each bay 2400mm wide x 750mm deep x 2850mm high. (4 lots). Metal roll front storage cupboard with shelves, dividers and key. 1000mm wide x 500mm deep x 1400mm high. (3 lots). Spaldings bandsaw with rolling bed.* Large metal bandsaw with new motor.* Large fly press.* Medium fly press.* Large pillar drill.* 9ft sheep trough. 6ft sheep trough. 65cm hand held hedgecutter. Livestock feed trolley. Comer PTO shaft - unused. Safety frame suitable for Massey Ferguson Tractor. David Brown belt pulley. Land Rover roll bar. Ford TW15 link arms. 6x 20l heavy duty red paint. 6x 20l heavy duty grey paint. 6x 20l heavy duty green paint. 6x 20l black barn paint. (5 lots) 6x 20l red floor paint. (3 lots) 6x 20l green floor paint. Various 20l magnolia paint. Various 20l white masonry paint. Various 20l traffic film remover. Various poultry drinkers. Various galvanised dustbins. Various wooden stepladders. Various aluminium stepladders. Large quantity of expanding foam. Fly press on stand. Metal shear on stand. Set of Avery scales with weights. Large metal bin with quantity of rag. Various oil pumps and grease guns. Ridger body. Heavy duty winch. Barrel stand. Timber tongs. Chain block and tackle. Myford Super7 metal working lathe. Tilt. Various chain and load binders. Various tractor spares. Various hand tools. Various road signs. Various large sash cramps. Various hinges. Various plasterers' tools. Various chisels. Various drinkers. Various flat belting. Various ratchet straps. Various hydraulic fittings. Large quantity of fan belts. Large quantity of nuts and bolts of various sizes. Various gate metal work. Various cleaning products. Various spares to include machinery tines etc. Various pipe work fittings, vehicle spares to include mirrors etc. Large quantity of unused filters. Various builders' tools. Large quantity of small nuts and bolts. Various John Deere filters. Various John Deere tractor spares. Various screw jacks. Various electrical fittings and workshop lights. Large quantity of vices to include large examples. Large quantity of bottle and ratchet jacks. Large quantity of chain. Large quantity of post tops. Large quantity of electric motors. Large quantity of cabling and electric fittings. Large quantity of plastic pigeon decoys. Large quantity of gloves (unused). Various tarpaulins. Various workshop equipment to include oil cans, shovels, hacksaw blades etc. Large quantity of emery cloth and wire brushes, hand tools. Large quantity of welding masks. Various tools to include drill bits, soldering iron jack etc. Qualcast electric hedgecutter. Sachs Dolmar petrol chain saw.

5 Stihl petrol disc cutter. Stihl 017 chainsaw. Stihl MS180 chainsaw. Stihl MS170 chainsaw. Stihl chainsaw for spares and large quantity of chain bars, chains etc. Electric polisher and electric drill. Various warning lights. Large quantity of builders' hand tools. Various metal brackets.* Various spring tine spares.* Various hay turner spares.* Various flat belting.* Various sleepers.* Various unused fence posts.* Various telegraph poles.* Various used timber.* Pair of heavy duty vehicle ramps.* Quantity of roofing felt.* Various oils, grease and anti-freeze.* Various PTO shafts, top links etc.* Various chains and tow chain.* Various fasteners to include nuts, bolts, screws and nails.* Large quantity of plastic electric fence posts.* Various metal electric fence posts.* Various hand tools.* Galvanised feed bin.* Pneumatic grainstore vacuum.* Pair of sack scales with weights.* Sack lift converted to electric.* Impact socket set.* Grain fan.* Quantity of baler twine.* Air nailer.* Pump up pallet truck.* Small table saw.* 240V grain fan.* Various air tools.* Garden blower vac.* Aluminium extending ladder.* 2x wooden top metal frame work benches.* Horse drawn plough for restoration.* Various galvanised sheep troughs.* Calving jack.* Various drainage pipe and submersible pump.* Clark 240V cement mixer.* Various spares for milking machine.* Gas heater.* Galvanised water tank.* Pillar drill.* Tap and die set.* Quantity of welding rods.* Sealey 210XTD arc welder.* Husqvarna 350 chainsaw.* Bench grinder.* Various wearing metal for Kverneland plough.* Lamb weighing scales. Fordson Major tow bar. Various tow bars and linkages for Massey Ferguson 35. Box of various tractor spanners. Trimming stand. Yard barrow. Sheep handling seat. Dagging shears and case. 2x troughs. 6x wooden troughs. 2x feed scoops and hand scales. 5x feed bins. 5x buckets and bowls. 3x yellow crates. Sheet of weld mesh and part fencing roll. Jump leads. Yard tools and sledgehammer. Box of tools. Assorted veterinary items. 2x scale weights. Air compressor. 2x fuel cans. Various sheep coats, halters, show coats etc. Champion spark plug cleaner and tester. Vulcanising tool with 3 heads and box of patches. Foot operated brake riveting tool. 30 CWT pulley blocks. Tyre bead breaker and wheel brace. Commercial brace. Box of assorted books and manuals. Chainsaw. Hand bender. Petrol cement mixer. BOC 180 welder. Anvil. Assorted tools. Assorted air tools. Assorted fan belts. Power inverter. Cylinder head valve remover. Yale lift and pull ratchet. Track and pulley for engine removal. Assorted tools and spray gun. Britool 3/4" sockets. Assorted old tools to include Ford. Gas heat head PSI gauge and fittings. 2x hand benders on stand. Pipe vice on stand. 8 x 4 air lift table. Husqvarna 141 chain saw with 13" and 15" bars. Massey Ferguson 135 steering box. Massey Ferguson front hubs (unused). Franke pressure washer. Tool for seating valves and counter boring. 5x spools NH7200 baler twine (longer length). Oil filled arc welder. Petrol generator. Gas bottle trolley, regulators etc. Air operated jack.

6 Bell electric cement mixer.* Stuart clay trap and clays.* 4 wheel hand trolley with fixed sides.* Silage cover and tilt.* 4x concrete field drinker support stands.* 2x calf pullers.* Ladder stand off and various ladders.* Ransomes Marquis 20" cylinder mower.* Pack of 50 R clips/lynch pins.* (2 lots) David Brown Selectamatic tractor steering wheel.* Fordson Super Major tractor front badge.* 32x Bomford boot flails.* David Brown tractor red exhaust.* 4x 6" speed cramps. * 4x 5" heavy duty G cramps.* Spline, Torx and Hex bit sets.* 12 piece Tungsten router set.* Mortice chisels.* 3x diamond Core drills.* 12 piece SDS chisel set.* Professional chisel set.* 3x 600mms SDS drills.* 25 piece drill set.* 170 piece HSS drill set.* 9" wood auger set.* 240V chain saw sharpener.* Electric sheep shears.* 1000 piece crimp kit.* 4x British Army folding knife.* 2x heavy duty steel rakes.* Stainless steel border fork and spade.* Stainless steel digging fork and spade.* Post hole digger and post hole spade.* Long and short manure forks.* 2x professional groundwork tool.* Heavy duty chopper.* All steel forged fence spade.* Fence post auger.* Contractor's rammer.* Bill hook and machete.* Mattock.* Telescopic ratchet loppers and telescopic hedging shears.* Power pruner, lopper and shears.* Fencing pliers and puller.* Small aged fire pit.* Aged fire pit on stand and grill.* 6ft folding lattice garden spire.* 5ft folding garden lattice spire.* Stainless steel milk churn.* 40x 4.5" slitting discs.* 10x 9" slitting discs.* 2x 9" diamond discs and 12" diamond disc.* 24x assorted 4.5" flap discs.* Long arm riveter and box of rivets.* 14lb sledgehammer.* 4x levels.* 40 piece tap and die set.* 40 piece spline set.* Mini sledge, axe and club hammer.* 24" and 30" bolt croppers.* Heavy duty rivet gun.* 3 piece heavy duty wrench set.* 28 piece punch and chisel set.* 9 piece knife set in case.* 9 piece knife set in bag.* 8 piece metric impact sockets.* 10 piece air impact socket set.* 14 piece 1/" deep impact sockets.* 38 piece air impact sockets.* 5 piece air toolkit.* Air ratchet.* Air chisel set.* Air spray gun.* Air grease gun.* Professional air inflator gun.* Portable sand blaster.* 6x depressed lashing link.* 25x heavy duty tent pegs.* 4KG mixed washers.* 4x 34 piece Jubilee set.* 40x various shackles.* 150x 6, 8, 10mm linch pins.* 8 x assorted hitch pins.* 250 mixed R clips.* 6 x large gate latches.* 4KG mixed nuts and bolts.* Ball/pin towing coupling.* 5ft bar and 24" strong back bar.* 8T bottle jack.* Jockey wheel.* Pneumatic jockey wheel.* Sack barrow.* Trailer winch.* 0.5T nylon winch.* 3/8" tow chain.* 5/16" tow chain.* (2 lots) Steel loading ramp.* 12x 5m tapes.* 10ft Tyzack straight edge.* 2x 5l Jerry cans.* 20l Jerry can.* Extendable wheel wrench.* Sliding hammer.* 800 amp 3m jump leads.* 800 amp 6m jump leads. * 3/8" and 1/2" flex bars.* 3/4" 39" Venadium flex bar.* Rotary barrel pump.* 12x 200ml copper grease.* 24x DP60 penetrating oil.* 12 pairs thermal gloves.* 24 pairs thermal gloves.* 36 pairs gripper gloves.* 48 pairs gripper gloves.* 5x 63mm brassed padlocks.* 10x 50mm iron padlocks.*

7 3x various security padlocks.* 1800mm heavy chain and lock.* Extra heavy duty chain and lock.* 94 piece socket set.* 26 piece CV socket set.* 3/8" ratchet and socket strip.* 1/2" ratchet and socket strip.* 12 piece metric ring spanners.* 16 piece CV spanner set.* 48 piece spanner set.* 25 CV metric spanners.* 4x 5m x 35mm lorry straps.* 2x 8m lorry straps.* (2 lots) 2x 12m lorry straps.* (2 lots) 4x 6m x1" lorry straps.* 2x 4m 2T eyed sling.* 1200x 250x3.6mm cable ties.* 10x 14l trug buckets.* 10x horse feed buckets.* 4x 55l trug buckets.* 24x wire brushes.* 8x 2.5" cup grinder brushes.* 6x wire cup brushes.* 2x thinners.* Assortment of cable ties.* 2x 100ft x 3/8" rope.* 2x conservatory wash brushes.* Automatic welding mask.* 18ft x 23ft tarpaulin.* 4x tarpaulins, various sizes.* 3ft trailer board.* 4ft trailer board.* Magnetic trailer light set.* 2x revolving 12v warning lights.* Cockerel door bell.* Tractor door bell.* Horse bell.* Land Rover bell.* Garden pump.* Tractor seat stall.* (2 lots) Long handled boot scraper and brush.* Cast iron rusty hen.* (2 lots) Cow.* Solihull Land Rover sign and Approved Services Land Rover sign.* Lister sign and large Triumph Bonneville sign.* Large Flying Scotsman sign.* Barclay sign and Ransomes sign.* Various large metal signs. (6 lots).* Sale Two - Commencing at 10am Cattle Equipment 701 6ft and 7ft cattle feed fence.* " cladded gates.* 703 Various galvanised gates.* 704 Various galvanised gates.* 705 5x IAE cattle hurdles with pins.* 706 5x IAE cattle hurdles with pins.* 707 5x IAE cattle hurdles with pins.* 708 5x IAE cattle hurdles with pins.* 709 IAE shedding gates.* 710 IAE gate hoops.* x 10ft galvanised cattle yard gates (unused).* x 10ft galvanised cattle yard gates (unused).* x 10ft galvanised cattle yard gates (unused).* x 10ft galvanised cattle yard gates (unused).* x 10ft galvanised cattle yard gates (unused).* 716 Pair of 10ft heavy metal gates.* 717 Pair of 15ft heavy metal yard gates with overlatch.* 718 IAE 8ft galvanised half mesh gate.* ft wooden field gate. 720 Poldenvale sheep race with gates, 6ft x 9ft hurdles and 6 lamb feeding racks x 6ft sheep hurdles x 6ft galvanised sheep hurdles. 723 Cattle crush.* 724 8ft sheep field hayrack. 725 IAE 10ft sheep hayrack on wheels.* 726 IAE sheep ring feeder.* 727 Ring feeder.* 728 Cattle trough and hopper.* 729 Large galvanised four sided cattle feeder.* 730 Large galvanised four sided cattle feeder.* 731 5ft x 10ft Big Bale feeder.* 732 Cattle drinking trough x 12ft heavy duty gates.* 734 8ft gate & 9 1/2 ft gate.* 735 9ft gate.* 736 Cattle drinking trough. 737 Cattle trough x 12ft gates.* Spare lots Implements 751 Log cage to fit Ford Ranger double cab pickup. With tilt.* L plastic diesel tank x 6ft4 x10ft plastic coated security fencing panels.* 753A Large quantity of 8ft 9 tubular fence posts.* litre bunded fuel station.* 755 Luton body as removed from Transit van. With roller shutter door. 756 Roadless front weight.* 757 Ford 7600 tombstone. * 758 Case tombstone.* 759 Ford front weights.* 760 Massey Harris combine wheel weights with bolts. 761 Wheel weight to fit 600x16 front wheel. 762 John Deere 45kg front weights x 10.* 763 John Deere 45kg front weights x 12.* 764 Weight frame to fit Ford 68 Series with various weights.* 765 Cab to fit Ford 4000 tractor.*

8 766 Three wheel water cart. 767 Roller mill. 768 ALO Quicke 2000 front end loader with bucket and brackets to fit John Deere.* 769 Massey Ferguson 165 trip loader with bucket and hoses. 770 Bale spike for loader. 771 Suton hydraulic bucket brush.* 772 Suton bale spike. To fit Sanderson teleporter.* 773 Slewtic muck fork. To fit Sanderson teleporter Serial number 1753.* 774 Browns flat 8 bale grab. To fit Quicke loader.* 775 Large access cage to fit pallet tines T grain bucket to fit Manitou.* 777 JCB 12" digger bucket. 778 Pallet tines to fit Quicke Euro Gowel round bale squeeze. JCB Q-Fit brackets Owned from new.* 780 Bale spike. 781 Big Bag lift to fit pallet tines.* 782 Grain bucket with JCB Q-Fit brackets.* 783 Heavy duty grain pusher with JCB Q-Fit brackets.* 784 Ex-Tean sprayer tank. Previously front mounted.* 784A Meijer big bale / flat 15 bale grab. With Matbro cone and pin brackets.* 785 Twose linkage mounted yard scraper.* 786 Fleming reversible yard scraper. Model 12 AY S HD. Serial number * 787 Foster reversible linkage mounted yard scraper.* 788 Chapelstone trailed menage leveller.* 789 Tamkin 3 point linkage PTO driven cement mixer.* 790 Mammut PTO driven pan cement mixer. Owned from new.* cylinder diesel powered generator.* 792 McConnel PTO driven saw bench.* 792A Kidd tractor driven saw bench. Serial number 75B Gabro portable saw bench with Lister diesel engine. 794 Denning linkage mounted PTO driven saw bench. 794A 2x combine side knives.* 795 Right hand electric side knife.* 796 Left hand electric side knife.* 797 Team 3M quad bike boom sprayer.* 798 Sprayer for quad bike with hand lance.* 799 Stocks Fanjet 24 slug pelleter.* 800 Pam Puma 40 linkage mounted PTO driven sucker blower Serial number With various pipework.* 801 Rear loader with muck fork.* 802 Teraw TM M topper.* 803 Major 602 mounted topper.* 804 Bomford RS-15 mounted topper. Model Serial number 3222M/01. Owned from new. 805 Opico 4ft finishing mower. For spares or repair. 806 McConnel Rhino SE7 topper.* 807 Votex 9ft mounted topper.* 807A McConnel Topper 9.* 808 Votex 2.8M flail mower. With hydraulic side shift Owned from new.* 809 Vintage horse drawn harrow. 810 c.4m manual fold chain harrows.* 811 Weaving 5M hydraulic folding chain harrows.* 812 Linkage mounted manual fold 16ft chain harrows.* 813 Bomford B457 linkage mounted hedgecutter. With cable control spools.* 813A McConnel PA6500T hedge cutter With 1.2m head, piston drive pump, Easy Drive System and Revolution controls. Owned from new.* 814 McCormick finger bar mower. 815 Krone AM201 disc mower.* 816 Vicon Acrobat hay turner. With spare tines and parts / instruction book.* 816A Vicon Acrobat.* 817 Bomford Wuffler hay turner. With spare tines.* 818 Bomford Wuffler hay tedder. 819 New Holland 570 conventional baler ft pickup. Used harvest 2017.* 820 Single leg subsoiler with depth wheel and spare leg. 821 Bomford Superflow chisel plough.* 822 Simba Flatliner 3 leg sub-soiler with packer. Model FL5/30/3. Serial number * 823 McConnel 4M 11 leg Shakarator. With Flexicoil packer. Owned from new.* 824 Ferguson 2 furrow conventional plough. 825 Ransomes TS59 plough. 826 Ransomes TS64H two furrow mounted plough. On digger bodies with discs and skimmers. 826A Ransomes PA264 3 furrow plough. 827 Ransomes 300 series 5 furrow reversible plough. 828 Kverneland 2+1 reversible plough. On farm from new.* 829 Dowdeswell DP7 D " reversible plough. UCN bodies. Serial number Dowdeswell DP " reversible plough. UCN bodies. Serial number Kverneland L085 5F reversible plough. With rear discs.* 832 Dowdeswell 2M furrow press.* 833 Ransomes 11 rigid leg cultivator.* 834 Ferguson cultivator. 835 Ransomes cultivator. 836 Ferguson potato ridger. 837 Manual fold spring tines with following harrow.* 838 Massey Ferguson hydraulic folding spring tines. 839 c.9ft spring tines with following harrow.*

9 840 Ripvator 3.5m manual fold pigtail cultivator. 841 Kongskilde 3M Vibroflex.* 842 Sumo LFS 150 tyre front press. Serial number * 843 FarmForce 4M tool bar with two rows of spring tines.* 843A Flexicoil 4M mounted land press.* 844 KRM 4M Opti-Cultivator. Comprising row of rigid tines, two rows of adjustable spring tines and tyre packer.* 844A Vicon Tilthemaster reciprocating power harrow.* 845 Howard HK DS 4M power harrow. With packer and piggyback linkage.* 846 Kuhn HR3501D 3.5m power harrow. With packer Owned from new.* 847 Maschio 4M power harrow.* 848 Maschio 5M rigid power harrow. With Flexicoil and end tow kit.* 849 Set of unused tines for Maschio 5M power harrow.* 850 Lely Roterra 5M rigid power harrow with packer.* unused tines for Lely Roterra power harrow.* 852 Ransomes HR31-76 mounted discs harrows. 853 Massey Ferguson 520 trailed discs. With cutaways to front.* 854 Ransomes 4M hydraulic folding trailed discs. Type HR " discs. Cut aways to front. Owned from new.* ft flat roll.* 856 8ft lightweight flat roll section flat roll.* 858 Rib roll pup. 858A 2x rib roll pups. 859 Set of triple gang rolls.* 860 Opico 6.3M hydraulic folding rolls. With breaker rings. Owned from new.* 861 Cousins 8.3M Sidewinder roll Serial number SW27F22B. With breaker rings. * 862 Sulky 4M piggyback drill with Suffolk coulters.* 863 Bettinson MC1 4M disc mounted disc drill. With trailing kit.* 864 Bettinson TC3 4M disc drill. With following harrow and transport kit.* 865 Greenland 4M power harrow. Serial number HOO With packer. Vendor reports oil leak on one rotor but has been used as is. Piggybacked with Vicon LZ5054M drill. With Suffolk coulters and pre-emergence markers. Serial number Owned from new.* 866 Maschio 4M power harrow piggybacked with Accord / Mistal drill.* 867 Amazone 4M combination drill. Comprising KE403 power harrow with packer. Serial number Coupled to Airstar Profi Suffolk coulter drill. With covering harrow and tramline kit. Owned from new.* 868 Vaderstad Rapid 400E 4M system tine drill With hydraulic fan, front tines, cross board, disc coulters, press wheels, covering tines, pre-emergence markers, tramline kit. 3 year old control box.* 869 Vicon Vari-Spreader. With hopper extension.* 870 Vicon Vari-Spreader fertiliser spreader. 871 Reco Sulky R500 fertiliser spreader.* 872 Reco Sulky 24M twin disc fertiliser spreader. With hydraulic shut-off. 873 Amazone ZAM twin disc fertiliser spreader. With recent new white spreading discs.* 874 Amazone twin disc 12-24M fertiliser spreader.* 875 Kuhn 1121 twin disc fertiliser spreader.* 876 Kuhn Axis M twin disc fertiliser spreader Owned from new.* 877 KRM M3W 24M twin disc fertiliser spreader With road lights, hopper cover and weigh cells.* 878 KRM M3W 24M twin disc fertiliser spreader With road lights, hopper cover and weigh cells.* 879 Standen Pearson SP244 quad potato planter Serial number 687. Shape forming hood. Owned from new.* 880 Grimme GT170S trailed potato harvester Serial number With twin multi-sep, wheel drive, hydraulic steering, levelling, additional webs, four man picking off table, canopy and camera kit.* 881 Irrifrance Javelin 300/90 bellows irrigator.* Spare lots Wheels and Tyres 902 Pair of thrashing drum wheels.* 903 Pair of 15.5/ %. 904 Ferguson rear wheel and tyre x 4x4 AT wheels and tyres. 906 Pair of Michelin XM /65R38 40%. 907 Pair of 20.8R38 dual wheels and clamps.* 908 2x Peak commercial axles.* 909 Set of wheels and Titon Super turf tyres to fit John Deere ride-on mower. Comprising fronts and rears. 910 John Deere 8 stud wheel centre.* 911 Pair of Continental Farmer 14.9/80-24 wheels and tyres. Ex-IH.* 912 Mitas 600/ low ground pressure wheels and tyres.* /95R44 row crop wheels and tyres to JD / Chafer sprayer.*

10 914 Set of row crop wheels and tyres to New Holland /925R48 rears at 80%. 230/925R32 fronts at 80% / trailer wheel and tyre. 916 Pair of 38x20x16 six stud trailer wheels and tyres.* 917 Pair of Goodyear 66x44 Terra Tires on eight stud centres. * 918 Pair of Stocks 18.4x38 dual wheels and tyres with clamps.* 919 Pair of Stocks 20.8x38 dual wheels and tyres with clamps.* 920 Pair of Soil Saver 11.2x32 wheels and tyres.* 921 Pair of Soil Saver 12.4x46 wheels and tyres.* x80x15.3 wheel and tyre with six stud centre.* 923 Pair of 7.00/20.12 wheels and tyres.* 924 Pair of 18.4x30 tyres.* x15.3 wheel and tyre with six stud centre.* 926 Set of four row crop wheels and tyres to fit Ford.* 927 Massey Ferguson 35 rear wheels and grass tyres x 7.50 wheels and tyres x Defender steel wheels x miscellaneous agricultural tyres x 10x22.5 trailer wheels x 10.00x20 trailer wheels x alloy wheels to fit Discovery 3. Fitted with General Grabber HTS tyres.* 934 2x alloy wheels to fit Discovery 3. Fitted with General Grabber AT tyres.* x14 wheel and tyre. 936 Ford TW15 rear wheel centre.* stud flotation wheels and tyres.* 938 Adaptor centres for Case.* wheels and tyres at 80%.* 940 2x trailer wheels and tyres.* 941 Unused Michelin 650/65R38 XM108 tyre.* 942 Set of row crop wheels and tyres to fit Case MX135.* 943 Single flotation tyre.* 944 Stocks 20.8R38 dual wheels and tyres at 80%. With clamps.* 945 Opico dual wheels and tyres.* R44 row crop wheels and tyres. * 947 Ferguson wheel centre spare lots. Trailers 961 Two wheel recovery dolly with ramps and winch ft x 5ft single axle car trailer. Recently refurbished. 963 Small single axle livestock trailer ft x 5ft single axle car trailer x 7 ATV trailer with low ground pressure wheels and tyres.* 966 Knott-Avonride 3.5T twin axle trailer chassis. 1.3M between wheels. 3.7M overall length. Unused. 967 Twin axle heavy duty car trailer with ramps.* 968 AL-KO twin axle 2.5T drop side trailer. 10ft x 7ft. Aluminium sides and ladder rack.* wheel trailer with ramps and winch ft twin axle trailer. 971 Harvey Frost 14ft twin axle beavertail car transporter. 971A Ifor Williams GX106 10ft x 6ft 3.5T twin axle plant trailer.* 972 Page Trailers 18 x 7 triple axle 3.5T box trailer. Serial number Double side doors, double rear doors and anti-slip floor. 973 Mid Norfolk Farm Supply Co 4 wheel diesel bowser. With petrol delivery engine.* 974 Howard single axle side discharge muck spreader. Recently fitted with new chains and flails. 975 Marshall single axle side discharge muck spreader.* 976A Richard Western ST22 twin axle slurry tanker Serial number P556. With super single wheels and tyres and 4 leg injector.* 976 Alfa-laval 7000L single axle slurry tanker. Type VSA V7. Serial number Vendor reports that the pump requires attention.* 977 Kuhn Euro Mix 1460 feeder wagon With electronic weigher.* wheel trailer. 979 Brian Legg 15ft single axle bale trailer.* 980 Single axle 24ft flat bed bale trailer.* 981 Hall 32ft 14T twin axle bale / box trailer. June With sprung drawbar, oil brakes, front and rear ladders, chequer plate floor. 385/65R22.5 wheels and tyres.* 982 Houghton Parkhouse 24ft livestock body mounted on Merrick Loggin twin axle flatbed trailer. With hydraulic brakes, deck with hydraulic run up and dividing gates.* 983 3T single axle tipping trailer. Fitted with c. 4T grain bin.* 984 3T single axle tipping trailer. Fitted with c.3t grain bin.* 985 Single axle 3T tipping trailer. 986 Ferguson 3T single axle non-tipping (from factory) trailer. c With twelve stud axle and drop in sides T single axle tipping trailer. 988 Wheatley 4T single axle, double drop side tipping trailer Serial number CD Pettit 5T tipping trailer with wooden sides and new towing eye T Single axle tipping trailer. With auto and conventional tailgates.* 991 Griffiths 6T single axle dump trailer.*

11 992 Marston DS6 6T single axle drop side tipping trailer. Serial number October Owned from new.* 993 8T single axle trailer.* 994 8T twin axle tipping trailer T single axle lorry conversion tipping trailer with aluminium body.* 995A Richard Western 10T twin axle tipping trailer Serial number Recent new floor. 996 Richard Western 10T twin axle tipping trailer Serial number Owned from new.* 996A 14T twin axle lorry conversion trailer. With Seadyke alloy body and rocking beam axle.* 997 A W Trailers 14T twin axle root crop trailer. With ten stud axles, super singles, hydraulic tailgate and sprung drawbar.* 998 Richard Western 14T twin axle root crop trailer With super singles, hydraulic tailgate and sprung drawbar.* 999 Richard Western 14T twin axle root crop trailer With super singles, hydraulic tailgate and sprung drawbar. Owned from new.* 1000 Richard Western SF14 14T twin axle tipping trailer Serial number With hydraulic tailgate, sprung draw bar, roll over sheet and 550/ flotation wheels and tyres.* Spare lots Vehicles 1021 MTD RS11J/96B ride-on mower. With Briggs and Stratton engine Honda ride-on lawn mower.* 1023 McCulloch ride-on lawn mower. With 9.5hp petrol engine Electrolux ride-on lawn mower hp engine. 42" cut with collector. Serial number C Stiga Park Pro 20 4WD ride-on mower Fitted with Combi-Pro 110 deck. Owned from new.* 1026 Stiga PA409 flail mower to fit Stiga Park Pro 20. Owned from new.* 1027 Avon inflatable dingy Fireball wooden dingy. Number 732. Jack Chippendale Constructions. c.55 years old. With transport trailer and launching trolley Suzuki Quad Sport 80cc 2WD quad bike. Requires new starter motor. 1029A Suzuki King Quad 300cc 4WD quad bike. With selectable 4WD and diff lock Skoda LX 1.9d single cab pickup. Registration S238 VBJ. 49,715 miles. MOT until April With Truckman top and tow bar Land Rover SII SWB truck cab Registration SGT 647F. No MOT. Vendor reports this is in off-farm condition Isuzu 3.1TD SWB Trooper Duty. Registration R575 ANC. 160,775 miles. No MOT. VIN JACUBS69DV Fitted with B F Goodrich all-terrain wheels and tyres. Various receipts, old MOTs etc. 1032A Isuzu Rodeo Denver double cab pick up. Registration EX09 LBF ,000 miles. MOT until December 2017.* 1033 Leyland Daf 7.5T 4x2 horsebox. Registration E879 OEA. 116,619km. Date of first registration 13/11/1987. MOT until September Fitted with coach built three horse body. With rubber matting and living accommodation with kitchen.* 1034 Ford Iveco 7.5T 4x2 horse box. Registration Y518 TOC. 453,020km. MOT until March Renault 26T 6x2 30ft flatbed lorry. Registration MX53 CHV ,000 km. MOT until July VIN VF622CVA Rear lift. Platform refurbished January Two recent new front tyres and windscreen.* Spare lots Plant 1051 Skytower 4.2m electric scissor lift on rubber tracks Terex HD1000 1T high tip 4WD dumper.* 1053 JCB T mini digger c.2000 hours. With breaker circuit and 4 buckets.* 1054 Volvo ECR28 2.8T mini digger c hours. With breaker circuit, manual quick hitch and four buckets. Owned from new.* 1055 Nexen FD25 diesel forklift hours. Serial number Y Manitou 2WD rough terrain forklift front wheels and tyres. Free lift mast and pallet tine.* 1057 JCB WD Farm Special Loadall. Registration A64 LKS front wheels and tyres at 75%. 12.5/80-18 rear wheels and tyres at 5%. Serial number 520-4/ With Strimech pickup hitch, Q-Fit headstock, pallet tines and third service.* 1058 JCB 520-4HL 4WD Loadall. Registration UUX 536Y. Serial number 520-4/ /80-24 front wheels and tyres /18 rear wheels and tyres. With pickup hitch, Q-Fit headstock, bucket and pallet tines JCB WD Farm Special Loadall. Registration J152 JPV hours /80-24 wheels and tyres at 20%. Serial number With manual Q-Fit headstock and pallet tines Bucket to fit JCB Q-Fit headstock Lifting jib to fit JCB Q-Fit headstock.

12 1062 JCB WD Loadall. Registration WP51 WSZ hours. Serial number SLP530001EO /80-24 wheels and tyres. With manual Q-Fit headstock and pallet tines.* 1063 Slewtic grain bucket to fit JCB Q-Fit headstock Serial number Owned from new.* Spare lots Tractors 1080 Kubota WD compact tractor hours.* 1081 Massey Ferguson 35 2WD tractor Serial number SNMY /11-28 rear tyres. Fitted with Perkins 152 engine, dual clutch, diff lock and front loader Massey Ferguson 135 2WD tractor hours. Serial number * 1083 David Brown 995 2WD tractor. Registration TBJ 641R hours. Serial number 95/011/ R38 rear wheels and tyres at 20% Zetor WD tractor. Registration YPW 369J (no paperwork) hours. Serial number /13-28 rear wheels and tyres. 8.3/8-24 front wheels and tyres. Fitted with McConnel forklift Fordson Dexta 2WD tractor. Registration 753 RBJ hours rear wheels and tyres at 99%. With roll bar, pickup hitch and horndraulic loader with bucket Ford WD tractor. Fitted with Quicke loader with bale spike, bucket and pallet tines Ford 3000 Super Dexter 2WD tractor. Registration GRT 947D rear wheels and tyres at 60%. With swinging draw bar and roll frame. On farm from new.* 1088 Ford WD tractor. Registration to follow hours. 12.4/11-36 rear wheels and tyres at 40%.* 1089 Ford 6810 Force III 2WD tractor. Registration J829BVX hours rear wheels and tyres at 80%. With 2 double acting spools and pick up hitch. On farm from new.* 1090 Ford WD tractor. Registration K514 HCL hours rear wheels and tyres at 60%. 320/85 R24 front wheels and tyres at 40% and 90%.* 1091 Massey Ferguson WD tractor. Registration F820 NGV hours. 13.6R38 rear wheels and tyres.* 1092 Same Anteras 110 4WD tractor. Registration K435 JTW hours. 18.4R38 rear wheels and tyres. 380/85R28 front wheels and tyres. 40kph gearbox. Vendor reports this has had a recent new clutch, high low synchro pack and reconditioned injector pump Renault Ares 620RZ 4WD tractor. Registration R206 ERW hours. 16.9R38 rear wheels and tyres at 50%. 13.6R28 front wheels and tyres at 30%. Serial number 72R0519. with full set of front weights and push out pickup hitch.* 1094 Case MX 135 4WD tractor. Registration V599 DDX hours. 650/65R38 rear wheels and tyres at 70%. 540/65R28 front wheels and tyres at 70%. With Lynx front linkage. 40kph gearbox. Owned from new.* 1095 New Holland T6080 4WD tractor. Registration AY08 GBO hours. 16.9R46 rear wheels and tyres at 75%. Range Command 40kph gearbox. Owned from new.* 1096 John Deere WD tractor. Registration BNH 575X hours. Serial number /85R38 rear wheels and tyres.* 1097 John Deere WD tractor. Registration HF05 GOX hours. 40kph gearbox. John Deere pickup hitch.* 1098 John Deere WD tractor. Registration AY12 BUA hours. Serial number 1L06930REBR R46 rear wheels and tyres at 5%. 14.9R30 front wheels and tyres at 5%. 50kph IVT gearbox. Front linkage and PTO. TLS and cab suspension. Air brakes. Power Beyond. Owned from new.* 1098A Set of wheels and tyres to fit John Deere Comprising 650/65R38 rears at 70%. 540/65R28 fronts at 60%.* 1099 John Deere 6125R 4WD tractor. Registration AU14 AGX hours. Serial number 1L06125RLEN /65R38 rear wheels and tyres at 40%. 540/65R24 front wheels and tyres at 40%. 50 kph Autoquad gearbox. TLS and HCS suspension, three double acting spools, front weight, HMS headland management, air brakes. Owned from new.* 1100 John Deere 6190R 4WD tractor. Registration AU14 AGY hours. Serial number 1C06190RLEN /65R42 rear wheels and tyres at 40%. 600/65R28 front wheels and tyres at 40%. 50kph Autoquad gearbox, TLS and HCS suspension, three double acting spools, front weight, I-Tec headland management, air brakes. Owned from new.* Spare lots Combine 1121 New Holland Clayson 1540 combine. Registration ONG 734P. Showing 774 hours. 12ft cut. 18.4/15-30 front wheels and tyres at 80%. Serial number Used harvest Spare lot

13 Lot 800 Lot 972 Lot 982 Lot 1033 Chartered Surveyors / Estate Agents Lot 1058 Lot 1087 Lot 1089 Lot 1090

14 TERMS AND CONDITIONS OF SALE - MACHINERY 1. INTRODUCTION The following defining terms are used in these conditions:- Auction Means any auction conducted by Clarke and Simpson Auctions Ltd either at the premises owned by them or elsewhere (including any internet based auction); Auctioneer Means Clarke and Simpson Auctions Ltd auctioneer as appropriate; Bidder Means a bidder at an auction, including the bidders personally present at the venue and those bidding by telephone or over the internet or otherwise; Buyer Means the bidder whose bid was the last bid when the auctioneer concludes the bidding; Conditions Means these Terms and Conditions of Sale; Hammer Price Means the level of bidding reached (at or above any reserve) when the auctioneer brings the bidding to a close; Lot Means any property accepted by Clarke and Simpson Auctions Ltd for offer at auction; "Vendor" Means the individual or other party offering a lot for sale. 2. DESCRIPTION No warranty is given or implied by the description in the catalogue. Each lot is sold in its condition at the time of sale with all faults, defects, imperfections and errors of description (if any). Whilst every endeavour has been made to describe the items adequately and properly, the buyer shall deem to have inspected the lot at time of purchase. All catalogues and Buyer s guides are for information only and do not form part of the contract. 3. VARIATION OF LOTS The auctioneers reserve the right to withdraw, consolidate or divide any lot or lots or submit them in any order that they deem desirable. The auctioneers will use every endeavour to ensure that all lots listed in the catalogue are presented for sale, but cannot accept any responsibility for the lots not being presented. Nor can they entertain any claim for expenses incurred in abortive attendance at the sale. 4. THE AUCTION All auctions are conducted at the absolute discretion of the auctioneer. The auctioneer shall conduct the auction with reasonable skill and care. The vendor reserves the right to sell subject to reserve price in respect of all lots. What constitutes a bid shall be at the absolute discretion of the auctioneer, acting with appropriate skill and care. The auctioneer shall have the right to refuse any bid in all cases but most notably when such a bid does not exceed the previous bid by at least 10% or such a proportion as the auctioneer shall in his absolute discretion direct. Where two or more bids at the same level are simultaneously received by the auctioneer, the auctioneer at his absolute discretion shall determine which bid to prefer. Subject to the foregoing where two or more bids are at the same level are simultaneously received by the auctioneer, any bid submitted in the room shall take preference over a bid submitted by telephone or internet at the same level. Any bid made or attempted by telephone or over the internet will only be deemed to have been made if received by the auctioneer. The auctioneer has the right at his absolute discretion to refuse admission to his premises or attendance at (or participation in) any auction by any person. In the case of any dispute, the auctioneer shall be sole arbitrator in any matters arising during or out of the sale. 5. BIDDERS All bidders will be required to register their particulars, bidders attending in person and those accompanying them will be required to provide photo ID and separate confirmation of address prior to viewing or taking any part of the sale and before entering any part of the premises to view. All bidders accept full liability for all bids submitted. Subject to the clause in this document headed The Auction, the highest bidder at the close of bidding shall be the buyer. Any dispute about a bid shall be settled at the auctioneer s absolute discretion. Bidders are all deemed to act as principles unless there is prior written acknowledgement by the auctioneers that a bidder is acting as an agent for a named principle. Bidders are strongly encouraged to attend the auction in person. Bidders shall be responsible for any decision to bid for a particular lot and shall be deemed to have carefully inspected and satisfied themselves as to condition. The auctioneers or their employees or agents shall not be responsible for any neglect or default in doing or failing to do so. Bidders will be given ample opportunity to view and inspect before the sale and prospective buyers must satisfy themselves as to all matters. The auctioneers, their employees or their agents or the vendor accept no liability for the correctness of specific opinions and all conditions and warranties, expressly, implied or statutory are hereby excluded. Number bidding will be used for speed and efficiency as in all our sales. All prospective buyers must complete the form supplied and register in the office prior to bidding at the sale to receive a number for bidding. 6. PAYMENT All lots shall be paid for upon the day of the sale and the auctioneers reserve the right to refuse removal of lots when payment is proposed by cheque and the buyer is unknown to them. To avoid such inconvenience payment should be made by cash, bankers draft, debit card or credit card (all credit cards and international debit cards are subject to a 2.5% plus VAT surcharge) and any alternative form of payment (by those unknown to the auctioneers) must be arranged with the auctioneers prior to the sale. Credit and debit card payments will only be accepted on a chip and pin basis with the cardholder present. After the fall of the hammer, the lot shall be at the buyer s risk. It is expressly stated that the auctioneers will not be responsible for its safe custody. Due to Money Laundering Regulations 2007, the auctioneers cannot accept cash payments in excess of 10,500 (inc. VAT) from any one person. All money received will be held in Clarke & Simpson Auctions Limited Clients Account at Barclays Bank plc, 4 Church Street, Woodbridge, Suffolk. Account Number Sort Code OVERSEAS PAYMENTS Overseas payments should be made by inter-bank transfer using Swift to Barclays Bank plc, 4 Church Street, Woodbridge, Suffolk. Sort Code , quoting Clarke and Simpson Auctions Ltd, Clients Account number IBAN Code: GB47BARC SWIFT CODE: BARC GB INVOICE ALTERATIONS After the sale day, Clarke and Simpson Auctions are not able to change or amend any invoice. Buyers should be entirely clear that this includes changing the VAT status of the buyer, or the name and address of the buyer. It will not be possible to transfer lots between buyers after the sale day. here are no exceptions to this rule. 9. DEFAULT The auctioneers shall act as agent of the vendor only. Any contracts for the sale of a lot shall be formed between the vendor and the buyer. As agents only, the auctioneers shall not be responsible for default by the vendor or the buyer. If any lot is not paid for in full and taken away in accordance with these conditions, or there is any other breach of the conditions, then the auctioneers, as agent for the vendor, shall at their absolute discretion and without prejudice to any other rights they may have, be entitled to exercise all or any of the following rights and remedies:- a. to proceed against the buyer for any action of debt or damages for breach of contract; b. to rescind the sale of that lot or lots sold by Clarke and Simpson Auctions Ltd to a defaulting buyer; c. to resell the lot (by auction or private treaty) in which case the defaulting buyer shall be responsible for any resulting deficiency in the total amount due (after crediting any part payment and adding any resale costs), any possible surplus so arising shall belong to the vendor; d. to remove, store and insure the lot at the expense of the defaulting buyer and, in the case of storage, the location of such storage shall be at Clarke and Simpson Auctions Ltd discretion; e. to charge interest at a rate of 2% per month of the total amount due to the extent that it remains unpaid for more than two working days after the sale; f. to retain that or any lot sold to the defaulting buyer until the buyer pays the total amount due; g. to reject or ignore bids from the defaulting buyer at future auctions or to impose conditions before any such bids are accepted; h. to apply any proceeds of sale for any other lots due or in the future becoming due to the defaulting buyer towards the settlement of the total remaining due. 10. INDEMNITIES, PENALTIES AND LIMITATIONS OF LIABILITY Buyers shall pay for any damage done by themselves or their agents during the removal of their lots. Attendance at the sale shall be at the risk of those attending in respect of both themselves and to their goods and vehicles. Any indemnity under these conditions will extend to all actions, costs, expenses, claims and demand whatsoever suffered or incurred by the person entitled to the benefit of it and the auctioneers declare themselves to be a trustee of the benefit of such indemnity so far as it is expressed to be the benefit of its employees and agents. Whilst the auctioneers endeavour to ensure that the information on their websites is correct, neither party warranty the accuracy and completeness of the material on their website. Also the auctioneers can make changes to the material on their website, or alter the products and prices described on it, at any time without notice. The material on the website may be out of date, the auctioneers make no commitment to update such material. All material on the websites is provided as is without any conditions, warranties or other terms at any time. Accordingly to the maximum extent permitted by law, the website is provided to all parties on the basis that the auctioneers exclude all representations, warranties, conditions and other terms which, but for this legal notice, might have effect in relation to the website. 11. ELECTRICAL SAFETY REGULATIONS All electrical lots are subject to electrical safety regulations and fall within the low voltage electrical equipment (safety) regulations 1989 and therefore any non-compliant items may only be purchased by a trader who is in the business of repairing or reconditioning such items to comply with these regulations. 12. GENERAL MATTERS Any notice to any buyer, vendor, bidder or viewer may be given by first class mail or in which case it shall be deemed to have been received by the addressee forty eight hours after posting or sending. All notices to the auctioneers must be sent in writing and is not acceptable. Any indulgence extended to any person by the auctioneers notwithstanding the strict terms of these conditions or the terms of consignment shall affect the position at the relevant time only and the respect of that particular concession only; in all other respects these conditions shall be construed as having full force and effect. Their conditions and any disputes or claims arising out or in connection with them or their subject matter or formation (including non-contractual disputes or claims) are governed by and construed in accordance with the law of England. The parties irrevocably agree that the courts of England have exclusive jurisdiction to settle any dispute or claim that arises out of or in connection with the agreement or its subject matter or formation (including non-contractual disputes or claims). 13. PUBLICITY Any catalogue and buyer guide are provided for information only and do not form part of these conditions. The catalogue and the buyer guide may contain additional terms and conditions. The auctioneers reserve the right to use any photographs, background information and research for publicity purposes both before and after the sale. This includes publication on their website and social media. 14. BUYERS FROM E.C. COUNTRIES Under E.C. regulations, goods purchased at our sale will be zero rated for VAT purposes, subject to all of the following conditions being met: a. The Auctioneers are in possession of your VAT/FISCAL Number (which will be verified with UK Customs & Excise) at the time of purchase. All new VAT registered buyers must supply a copy of their VAT registration certificate prior to the goods being collected. b. The goods are sent or transported out of the UK to a destination in another EC Member State. c. The Auctioneers receive valid commercial documentary evidence that the goods have been removed from the UK within three months of the date of the sale. If you are not registered for VAT in your member state or are unable to provide us with any of the above information, VAT at the standard UK rate will be payable and will not be reclaimable.

15 15. BUYERS FROM OUTSIDE THE EC A VAT Deposit equivalent to the standard rate of UK VAT (currently 20%) will be charged on all lots which are being exported outside the E.C. Refunds of VAT deposits will be dealt with under H.M. Customs and Excise regulations as set out in the current Notice 703. The minimum requirement of satisfactory evidence of export required to allow a refund is an original Bill of Loading or Certificate of Shipment issued by a recognised Shipping/Transport Company or a S.A.D. stamped by Customs & Excise and clearly identifying the goods which have been exported. 16. INSURANCE OF GOODS All vendors and buyers must be entirely clear that they, as vendor or buyer are solely responsible for the goods standing at the Auction Centre. If required, you must make your own insurance arrangements in this regard. 17. V5 REGISTRATION DOCUMENTS Unfortunately, some vendors are unable to provide a V5 registration document for tractors and other road registered vehicles which have been sold at auction. As auctioneers, we give no warranty in this regard. 18. FARM SAFETY REGULATIONS The attention of buyers of agricultural tractors and machinery is drawn to the provision of the Health & Safety at Work Act 1974, the Agricultural (Field Machinery) Regulations 1962, Agricultural (Tractor Cabs) Regulations 1974 and all other acts and regulations applicable to farm safety. Buyers are reminded of the provisions of the above Acts regarding the safety guarding of machinery and implements, and that some of the machinery sold at the Auction Centre may not immediately comply with the regulations issued thereunder. It is an offence to use any machinery which does not comply with the regulations laid down in the Acts and Regulations and accordingly, it is a condition of the contract of sale relating to such machines and implements that any buyer shall satisfy himself as to any statutory requirement for the use of any item and no liability shall rest with the vendors nor the auctioneers. Vendors are required to take sufficient steps to ensure that the lots entered are safe and without risk to health at all times when being set, used, cleaned or maintained by a person at work and in observation of proper health and safety procedures and so far as is reasonably practical, the vendor has carried out or arranged to be carried out, of suitable testing and examination to ensure that there will be no risk to safety (taking into account the age and condition of the lots). The vendor also undertakes to provide the buyer all operators handbooks and instruction manuals. If required to do so and if possible, the vendor further undertakes to provide the buyer with an explanation about the use for which the lot is designed and about any issues necessary to ensure it will be safe and without risk to health at all times. 19. HEALTH AND SAFETY PRECAUTIONS The Auction Centre site includes items of working machinery and those persons attending are advised to take all reasonable precautions to avoid accidents. We have a duty to strive to improve safety for both our staff and the public wherever possible and the following precautions must be adhered to by all those entering the Auction Centre. a. No tractors or machinery to be left running. Vendors and buyers must at all times maintain supervision of machinery and vehicles when running. b. Children and dogs are to be kept under supervision at all times. c. Tractors and machinery are not to be driven around the Auction Centre, other than for the purpose of loading or unloading. d. Please note that the speed limit at the Auction Centre is 5mph. Please be aware of pedestrians. e. Smoking is not permitted within the Auction Centre buildings or around tractors, machinery or engines. f. All loader arms are to be lowered and the contents of the buckets emptied. g. If starting tractors across the solenoid, please ensure two people are present, one person being in the driving seat having control of the clutch and brakes, and that the tractor is in neutral. h. Prior to unloading, please check brakes, clutch and position of the engine stop. These rules apply to everyone attending the Auction Centre with no exceptions. Failure to observe these and other safety precautions or other acts of recklessness could result in exclusion from the Auction Centre on a temporary or permanent basis. All mechanical loading and unloading takes place at the vendors' or purchasers' risk. PERSONS ATTENDING THE AUCTION CENTRE SALE GROUND DO SO AT THEIR OWN RISK. 20. VENDORS' COMMISSION Vendors shall pay commission to the auctioneers at the following rates:- a. Lots in Sale 1-15% plus VAT of the hammer price b. Lots with a hammer price of over 3,000 6% plus VAT of the hammer price (exclusive of VAT) c. Lots with a hammer price between 1,000 and 3, % of the hammer price plus VAT d. All other items 10% of the hammer price plus VAT with a minimum charge of 3 plus VAT per lot. e. VAT at the standard rate will be charged on all commissions. f. Commission at the rate specified in clause 20a above together with the Entry Fees as specified in clause 21 below, shall be payable by the vendor on all lots sold at the Auction Centre. g. PAT testing will be undertaken on all qualifying electrical items offered for sale. The charge for this will be 3 plus VAT per item in addition to all other charges. We guarantee all vendors either the lot or payment. We do not make payment to vendors until we have been paid by the purchaser. We will retain the lot until payment is made. 21. ENTRY FEES Entry fees on all lots sold, unsold, entered but not forward shall be charged at 5 plus VAT per lot. 22. BUYERS' PREMIUM All purchases will be subject to the following premium. a. Sale 1 15% of the hammer price plus Vat. b. Sale 2 - i. Lots 1,001 and above - 3% of the hammer price plus VAT with a maximum charge of 1,500 plus VAT ii. Lots from 201 to % of the hammer price plus VAT. iii. Lots up to % of the hammer price plus VAT. c. Any purchase made via or will be subject to an administration charge of 1% plus VAT on the hammer price. Please be entirely clear that the Auctioneer s decision is final in this regard. 23. ENTRY OF LOTS FOR SALE All lots must be delivered to the Auction Centre by arrangement with the auctioneers and any reserve prices must be set out in writing and handed to the auctioneers office at least 96 hours prior to the sale otherwise no responsibility can be accepted by the auctioneers for errors in respect of reserve prices. All lots brought to the Auction Centre must be offered for sale by auction and must not be sold privately before the sale. In the event that any private transaction takes place following a sale whilst the lot remains in the auction centre they must be notified to the auctioneers. Such transactions will be treated as a sale of the lot by the auctioneers. If a lot remains unsold following the sale for which it has been entered and remains in the auction centre, the auctioneers reserve the right to sell such lot at the reserve price without further consultation with the vendor. Following the sale of any tractors, vehicles and other self-propelled machines, the auctioneers shall not pay over the purchase price to the vendor until such time as the vendor has given to the auctioneers the registration document for such tractors, vehicles or other self-propelled machines if the vendor has stated on the entry form that the registration document will be supplied. The auctioneers reserve the right to annul and cancel any sale where the vendor has stated on the entry form that the V5 registration document is supplied and whereupon the said document is not delivered to the auctioneers within fourteen days of the day of the sale. The auctioneers also reserve the right to apply for a duplicate V5 registration document and charge the vendor the DVLA fee for such a duplicate together with an administration fee equivalent to 30% plus VAT of the DVLA charge. Where the vendor does not show the V5 registration document as being supplied these charges will not apply. In the event the sale is rescinded, the vendor will be responsible for any cost of transport incurred in the lot being transferred to or from the auction centre or any other agreed location. 24. TITLE The vendor undertakes that the items entered for the sale are their sole property and are not subject to any hire purchase, lease, contract hire arrangement or any other contract, and that they shall abide by these Standard Terms and Conditions of Sale. The vendor further warrants that all the information supplied by them or their agents, is accurate and agree to indemnify any buyer against any liability howsoever arising in respect of the goods being received at auction or in respect of any inaccuracies in the above information and against all costs and expenses incurred in dealing with any claim arising in that respect. The vendor certifies that they have notified the auctioneers in writing if any of the items entered have been recorded by any insurance company as a write-off or have been subject to a major insurance claim. 25. ONLINE BIDDING Clarke and Simpson Auctions Ltd may offer an online bidding service via i-bidder for bidders who cannot attend the sale. In completing the i- bidder.com registration on i-bidder and providing your credit card details and, unless alternative arrangements are agreed with Clarke and Simpson Auctions Ltd, you:- a. authorise Clarke and Simpson Auctions Ltd, if they wish, to charge the credit card given in part or full payment, including all fees, for items successfully purchased in the auction via i-bidder.com, and b. confirm that you are authorised to provide these credit card details to Clarke and Simpson Auctions Ltd through i-bidder and agree that Clarke and Simpson Auctions Ltd are entitled to ship the goods to the card holder name and card holder address provided in the fulfilment of the sale. Please note that any lots purchased via i-bidder.com live auction service will be subject to an additional 1% commission charge plus VAT at the rate imposed on the hammer price, as detailed under clause 22, Buyer s Premium. 26. REMOVAL OF LOTS Some of the lots will be in a building and lots in the buildings cannot be removed whilst the sale is continuing in that building. Subsequently lots can be removed during the sale and subject to conditions regarding payment and safety, all lots must be removed by the first Thursday following the sale. Any lots remaining on the site after this time will be charged a storage fee of 50 per day (or any part thereof). Storage charge must be paid in full prior to the release of the goods. Clarke & Simpson Auctions Ltd. reserve the right to re-sell by any means any lots left on site for more than 7 days following the date of the sale in order to clear the site and recover costs. Attention is drawn to buyer s responsibility after the sale as stated previously. 27. HOURS AND MILEAGE Hours and mileage and other detail is as at the time of cataloguing not at the time of sale. Bidders must satisfy themselves in this regard. 28. EXCLUSION OF LIABILITY The Auctioneers shall not be liable for any expense, loss, claim or proceedings in respect of personal injury to or death of any person arising out of or in the course of or caused by the sale, except to the extent that the same is due to the negligence of the auctioneers. 29. GOVERNING LAW AND JURISDICTION For the avoidance of doubt, all contracts entered into between the buyer and vendor and between either of them and the auctioneers on the basis of these standard terms and conditions, are governed by the laws of England and Wales and the parties hereby submit to the non-executive jurisdiction of the English Courts.

16 Lot 861 Lot 867 Lot 880 Lot 1032 Lot 1093 Lot 1098 Lot 1099 Lot 1121