PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT

Transcription

1 Price quote 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Per Street Addre Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Z Phone #: Plainview, NY Toll Free #: Fax #: Addre pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Beam A9000 GRV 2.0 Purpose and Intended Use (Area) Glycol Recovery, Fuel Spill Clean-up 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description Kenworth T370 chassis, Paccar PX-9 engine, 260HP (or equivalent) 8.0 Auxiliary Engine Description Mercedes-Benz 904, diesel 9.0 Does the Equipment have optional attachments? Yes or No_X_ 10.0 Is the Equipment an Attachment? Yes or No_X_ 11.0 Type of Drive Unit required for attachment N/A 12.0 Warranty Information One year or 2000 hours TOTAL PRICE: $336,000 (includes $89,000 chassis allowance) Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 Rear door drain valve - 4 inch. for draining of water from hopper $ Heated Hopper Floor from Aux. Engine $11, Pump, hydraulically driven, approx 420 U.S g/m ( 1600 litres/m) $12, Load indicator for air spring suspension $ Air pressure draining and cleaning of low pressure water system $ Separate fuel tank for auxillary engine $4,260

2 13.7 Rear TV Waeco - duel color, sound $3,029 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Plainview, NY 11803

3 Price quote 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pe Street Addr Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Phone #: Plainview, NY Toll Free #: Fax #: Addre Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Beam A9000 ASV 2.0 Purpose and Intended Use (Area) Runway Rubber Removal; FOD Removal; Apron Sweeping & Scrubbing 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) Suction of Storm Drains; Glycol Recovery; Fuel Spill Cleanup; Hot Water Applications; General Street Sweeping; Removal of Construction Debris; Cleanup of Fuel Hydrant Pits; High-Pressure Hose Reel; Scrubbing of all Surfaces 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description Mack MP7-345R, 345HP, diesel, 6 cyl (or equivalent) 8.0 Auxiliary Engine Description Mercedes HP Tier Does the Equipment have optional attachments? Yes or No_X_ 10.0 Is the Equipment an Attachment? Yes or No_X_ 11.0 Type of Drive Unit required for attachment N/A 12.0 Warranty Information One year or 2000 hours TOTAL PRICE: $546,416 (includes $137,000 chassis allowance) Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with

4 , 13.2, 13.3, etc., until you have listed all of the options "A9000 Hydrostatic sweeper for airport application Hopper 9m³ 304 stainless steel voided volume. Water tank capacity 2900L. Hydrostatic engine pack incl. hydrostatic transmission (High capacity fan) Tilt of Hopper, operated from cab Rear door, operated from cab Rear chute, 250mm On/off Ergo switch Mounting of hydraulic pump on PTO for tilt of hopper. By delivery of chassis the PTO must be mounted on the chassis engine or gear box Chassis preparation Wide suction between axles incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width" "A14000 Twin engined sweeper for airport application 14m³ 304 stainless steel voided volume. Water tank capacity app. 4500L Requires twin rear axles to provide sufficient payload capacity. Aux. engine JCB 129kW, Stage 3b / Tier 4 (std. fan) Tilt of Hopper, operated from cab Rear door, operated from cab Rear chute, 250mm On/off Ergo switch Mounting of hydraulic pump on PTO for tilt of hopper. By delivery of chassis the PTO must be mounted on the chassis engine or gear box. Chassis preparation Wide suction between axles incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width" "A14000 Hydrostatic sweeper for airport application 14m³ 304 stainless steel voided volume. Water tank capacity app. 4500L Requires twin rear axles to provide sufficient payload capacity. Hydrostatic engine pack incl. hydrostatic transmission (High capacity fan) Tilt of Hopper, operated from cab Rear door, operated from cab Rear chute, 250mm On/off Ergo switch Mounting of hydraulic pump on PTO for tilt of hopper. By delivery of chassis the PTO must be mounted on the chassis engine or gear box. Chassis preparation Wide suction between axles incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width" Pneumatic valve for extra water tank between cab and hopper (1100, 1500 or 2000 l). In cab operation Extra water tank in hopper (600 l). Reduces voided volume by 0.6 m³. Stainless Extra water steel tank 304 in hopper (1000 l). Reduces voided volume by 1.0 m³. Stainless steel 304 Extra water tank between cab and hopper (1100 l). Stainless steel 304 Extra water tank between cab and hopper (1500 l). Stainless steel 304 $330,868 $305,180 $327,436 $1,560 $6,364 $7,071 $18,534 $19,254

5 Extra water tank between cab and hopper (2000 l) Stainless steel 304 $19, Mesh in hopper, to be operated from cab $1, Tilt of hopper with manual hand pump. For emergency use $1, Hopper vibrator mounted at center plate $9, Hopper vibrator mounted at filter screen (JSL system) $1, Rubber chute mounted on rear plate Protects rear of vehicle from discharged waste Rear chute = width 350mm. Stainless steel 304. Protects rear of vehicle from discharged waste (instead of, and replaces the standard 250mm rear chute). Inspection hatch in air channel. Give access for cleaning of air channel Side plates to match cab line Used when cab height exceeds hopper height Centre Brushes Wide Sweep Brush, pivoting 1275mm long, Ø400mm brush rings (instead of, and replaces the standard WSB 5" x 1300mm) For use with dual sweep Centre brush, stationary 1600mm long, Ø400mm brush rings, 5" shaft. (instead of, and replaces the standard WSB 5" x 1300mm) Not suitable for dual sweep Adjustment of revolutions Operated from inside cab Adjustment of revolutions Operated from outside cab Channel Brushes $436 $646 $1,016 $2,778 $6,228 $319 $1, Rotatilt of right channel brush $2, Channel Brush, right - pushing $1, Rotatilt of left channel brush $2, Channel Brush, left - pushing $1,651 Simultaneous funtion. Channel brushes left + right and WSB run simultaneously. $3, Channel brush (for dual sweep), 750mm nozzle width. Ø300mm suction hose (Includes multi-coupling). Incl. intake duct flap valve in hopper. FOR USE WITH HIGH CAPACITY FAN Channel brush (for dual sweep), 600mm nozzle width. Ø275mm suction hose Incl. intake duct flap valve in hopper. FOR USE WITH STANDARD FAN $921 $30,394 $26, Multi coupling at suction nozzle, right $ Multi coupling at suction nozzle, left $613 Brush unit, side sliding right, 160mm. Excl. WSB Pneumatic operation $2,865 Brush unit, side sliding left, 160mm. Excl. WSB Pneumatic operation $2,865 Brush unit, side sliding right, 200mm, hydraulic operation, incl. sidesliding of WSB assembly $5,698 Brush unit, side sliding left, 200mm, hydraulic operation, incl. sidesliding of WSB assembly $5,698

6 Brush unit, side sliding right, 400mm hydraulic operation, incl. WSB, stationary 1300mm long Brush unit, side sliding right, 400mm hydraulic operation, incl. WSB, stationary 1600mm long Brush unit, side sliding, right, 400mm hydraulic operation, incl. WSB, pivoting. $7,539 $7,539 $7, Brush unit, side sliding right, 400mm hydraulic, excl. WSB $6, Brush unit, side sliding left, 400mm hydraulic, excl. WSB $6, Brush frame, tilt capable right, $2, Brush frame, tilt capable, left, $2, Adjustment of revolutions for the rear brush. Operated from inside cab Adjustment of revolutions for the rear brush. Operated from outside cab $1, Cyclist protection mounted on the right side of the brush unit $2, Cyclist protection mounted on the left side of the brush unit $2, Cyclist protection mounted on the left side without the brush unit $1, Cyclist protection mounted on the right side without the brush unit $1,350 Water Systems & Related Items Air pressure draining and cleaning of low pressure water system $ Flushing of air channel, using an external water supply $ Flushing of air channel, using an internal water supply $ Special filter in hopper so that hopper can be used as water tank $8, Indicator for empty water tank Standard for high pressure pump Heat exchanger $1, " ball valve for draining of water tank $ Hose reel 15m for low pressure water system. Standard water pump $921 $435 $2, Detergent system incl. dosage unit, 25 l tank - "Tap Flo" $8,850 Detergent tank l with spray boom at front $17,382 Pump bar High pressure equipment l/min Incl. hose reel and 15m of hose. $12,801 Requires min. 16kw power High pressure equipment 106 l/min. Incl. hose reel and 15m of hose. Incl. adjustment of pressure from cab Requires min. 39kw power. High pressure equipment 106 l/min. Incl. hose reel and 15m of hose. Incl. adjustment of pressure from cab. Requires min. 52kw power. High pressure equipment l/min. Incl. hose reel and 15 m of hose. Incl. adjustment of pressure from cab. Requires min. 74kw power. High pressure equipment l/min Incl. hose reel and 15m of hose. Incl. adjustment of pressure from cab. Requires min. 74kw power. High pressure equipment l/min Incl. hose reel and 15m of hose. Incl. adjustment of pressure from cab. Requires min. 102kw power. $29,125 $37,357 $56,524 $56,524 $61,481

7 13.75 High pressure equipment l/min. Incl. hose reel and 15m of hose. Incl. adjustment of pressure from cab. Requires min. 51kw power. $39, Spray bar, front mounted for standard water system $1, Spray bar, front mounted, fixed, left or right for high pressure $4,265 Spray bar, front mounted, pivoting (manually), left and right for high pressure $4,954 Spray bar, front mounted, (pneumatic) pivoting left/ right for high pressure. $6, Spray bar, front mounted, side sliding 750mm $6,971 Spray bar mounted behind wide sweep brush, with V-jets for high pressure $4,265 Spray bar, mounted behind the suction nozzle of a standard brush unit, RIGHT. 600mm suction nozzle $2,480 Including V-jets. Water volume/spray boom approx. 25 l. Spray bar, mounted behind the suction nozzle of a standard brush unit, LEFT. 600mm suction nozzle $2,480 Including V-jets. Water volume/spray boom approx. 25 l. Spray bar mounted behind right channel brush for high pressure system - 25 l/min, controlled from the cab $2,295 Spray bar mounted behind left channel brush for high pressure system - 25 l/min, controlled from the cab $2,295 Spray bar, mounted in front of wide suction, with V-jets for high $4,265 pressure. Spray bar, mounted behind wide suction, with V-jets for high $4,265 pressure Spray bar, mounted in front of wide suction, incl. rotating jets for high $7,896 pressure Spray bar mounted at right side of rear suction positioned manually $2, Spray bar mounted at left side of rear suction positioned manually $2,189 Pump, self-priming for filling in water from river, lake, water supply point etc. $11,226 Front Equipment Front brush up/down right side. Mounted underneath the front bumper - must be approved by dealer $12,048 Front brush up/down right side. Incl. extension. Mounted underneath the front bumper - must be approved by dealer $13,585 Front brush up/down left side. Mounted underneath the front bumper must be approved by dealer $12,048 Front brush up/down left side. Incl. extension. Mounted underneath the front bumper - must be approved by dealer $13, Front brush, side sliding right 750mm. $15, Front brush, side sliding left 750mm. $15,445 Front brush, side sliding right 750mm. Hydraulic adjustment Incl. weed brush $18,998 Front brush, side sliding left 750mm. Hydraulic adjustment Incl. weed brush $18,998 Front brush, side sliding right 300mm + pneumatic extension mm (Total 750mm) Mounted underneath the front bumper - $17,414 must be approved by dealer Front brush, side sliding left 300mm + pneumatic extension 450mm (Total 750mm) Mounted underneath the front bumper - must be approved by dealer Front brush, side sliding right 300mm. Hydraulic adjustment Incl. weed brush. Mounted underneath the front bumper - must be approved by dealer $17,414 $21,418

8 Front brush, side sliding left 300mm. Hydraulic adjustment Incl. weed brush. Mounted underneath the front bumper - must be approved by dealer $21, Reversible hydraulic motors (per brush) $1,190 Front brush side sliding 1100mm. Pivoting right + left Hydraulic adjustment. ITM OKBLR $36,208 Special front brush 1100mm - side sliding right 1100mm Incl. hydraulic adjustment $36,866 Special front brush 1100mm - side sliding left 1100mm Incl. hydraulic adjustment $36, Scraper, air operated, behind right front wheel. Side sliding 750mm $8, Scraper, air operated, behind left front wheel. Side sliding 750mm $8,600 Brush behind right front wheel side sliding 750mm Hydraulic adjustment, incl. weed brush $20,484 Brush behind right front wheel side sliding 750mm Hydraulic adjustment, incl. weed brush & spring relief $21,490 Brush behind left front wheel side sliding 750mm Hydraulic adjustment, incl. weed brush $20,484 Scraper behind front wheel 2500mm, perpendicular to direction of travel $23, Scraper behind front wheel 2500mm, 17 back from right front wheel $24, Scraper behind front wheel 2500mm, 17 back from left front wheel $24, Rear / Top Mounted Equipment Wander hose, rear mounted 2m elevation Ø170mm hose Electrically-pneumatically operated Wander hose, rear mounted 3m elevation Ø170mm hose Electrically-pneumatically operated Wander hose, rear mounted 2m elevation Ø200mm hose Electrically-pneumatically operated Wander hose, rear mounted 2m elevation Ø170mm hose Spring-relieved Wander hose, rear mounted, 2m elevation Ø200mm hose Spring-relieved $9,880 $10,723 $10,255 $6,090 $7, Closure flap for rear mounted wander hose $1, Top mounted wander hose Ø150mm Spring-relieved Top mounted wander hose Ø200mm Spring-relieved Top mounted wander hose Ø200mm Hydraulic operation Top mounted wander hose Ø150mm Hydraulic operation $6,486 $7,111 $10,538 $9, Rear TV Waeco - Single Colour, sound, flat screen $2, Rear TV Waeco - Dual Colour, sound, flat screen $3,029 Additional Options Tool box 400 x 400 x 400mm $ Rear door drain valve - 3 inch. for draining of water from hopper $ Rear door drain valve - 4 inch. for draining of water from hopper $ Water tank inlet filter (supplied loose) $ Load indicator for standard spring suspension $ Load indicator for air spring suspension $ Mounting of manual water valves in cab for adjustment of water volume. Incl. water valve for automatic closing when sweep gear is in raised position $5, Illumination of control panel $144

9 Reverse Audible Warning Device $144 Central lubrication, single including Chassis Excluding lubrication of rear door and inspection hatch $12,694 Central lubrication, single excluding Chassis Excluding lubrication of rear door and inspection hatch $10,708 Central lubrication, dual including Chassis Excluding lubrication of rear door and inspection hatch $16,028 Central lubrication, dual excluding Chassis Excluding lubrication of rear door and inspection hatch $14, Central lubrication Additional price for demount system $4, Central lubrication Additional price for extra brush, scraper etc. $1,924 Grease points (centrally placed) for brush unit, primary side (18 pcs grease points), locking system (9 pcs. grease points) and motor $5,691 shaft (2 pcs. grease points) Grease points for brush unit, secondary side (18 pcs. grease points). $2, Extra beacon mounted on hopper (2 are standard) $ Extra beacon mounted on cab $ Extra Spotlight, LED $ pcs. blitz light (rectangular), fitted in front of vehicle $ pcs. blitz light (rectangular), fitted on the rear of vehicle $ Beacon as blitz light (per beacon). $ Ability to fill from a hydrant on either side of machine. $ Facility to carry spare channel brush (spare brush not included) $ Broom & Shovel Stowage $ Indicator for semi-empty hydraulic tank (price per tank) $1, Additional work lights on rear of vehicle (x2) $ Mounting of work light in engine compartment $ Indicator for empty detergent tank $ emergency stop mounted in cab $ emergency stop mounted outside $439 Chassis Related Items Separate hydraulic tank, approx. 150 litres $4, Separate fuel tank for auxiliary engine. Manual tank gauge $4, Indicator (electric) for empty fuel tank $1, Switches mounted in chassis dash board Volvo, MAN, Mercedes-Benz. Standard for Scania chassis, but please note that the Scania chassis must be ordered with an extra long dash board Wide Suction Systems Wide suction mounted behind the rear axle. 2500mm. Chassis to be with rear air suspension $2,758 $36, Special side suction for use with $2, Rotor Cleaner System mounted behind the rear axle. $71,113 Demount Systems Demount system frame, detachable S / A 9000 $3, Demount system frame, detachable S / A $4, Extra supporting legs - 4 pcs. $6,084 Airport Sweeping- / Suction Systems Front mounted pivoting roller brush. 2600mm width. 22. ø800mm. ITM VKM 300 Front mounted pivoting roller brush. 2500mm width. 22. ø800mm. ITM VKM 240 Front mounted pivoting roller brush. 3500mm width 22. Ø900mm ITM VKM 400 $57,466 $56,230 $78,836

10 Magnet, front mounted $18,479 Magnet, rear mounted Chassis + specification need to be approved by BEAM A/S $18, "Wide suction between axles 2400mm for liquid recovery. High speed runway and taxiway sweeping (instead of, and replaces the standard Wide suction between axles Incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width)" "Wide suction between axles Incl. 1100mm side brushes, brush behind suction nozzle and a 3rd brush. 2400mm width (instead of, and replaces the standard Wide suction between axles Incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width)" -$33,101 -$17,384 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Plainview, NY 11803

11 Price quote f 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pers Street Addre Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Z Phone #: Plainview, NY Toll Free #: Fax #: Addres pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Bergkamp FP5 Flameless Pothole Patcher 2.0 Purpose and Intended Use (Area) irside and landside pothole and asphalt repair 3.0 Is Equipment Multi-functional? Yes or No_X 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) Sander 6.0 Does Equipment have an Engine(s)? Yes or No_X 7.0 Drive Engine Description N/A 8.0 Auxiliary Engine Description N/A 9.0 Does the Equipment have optional attachments? Yes X_ or No 10.0 Is the Equipment an Attachment? Yes_X or No 11.0 Type of Drive Unit required for attachment Truck chassis 12.0 Warranty Information One year TOTAL PRICE: $88,090 Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 Single Drum Roller (Incl platform modification) $8, Sand Spreader $10, Strobe light - dual LED front mounted $1, Strobe light -dual LED rear arrow board mount $ Backup camera with night vision and sound $1, Cone holder $ Tool holder $205

12 13.8 LED lighting system $1, Night work lights LED $ Swing auger $10, Gal Emulsion Tank (ILO 80 Gal Std) $3, Rear cleaning fluid on hose reel $ Second hose reel (Air and tack hose reel) $ Pavement breaker tools: tamper, chisel, shank $ DOT arrow board - 30" x 60", 15 light, incandescent $2, DOT arrow board - 30" x 60", 15 light, LED $3, Single strobe light - LED $ Custom color - hopper body only $ Spare parts kit $1,672 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Salina, KS 67401

13 Price quote f 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pers Street Addre Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Z Phone #: Plainview, NY Toll Free #: Fax #: Addres pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Prinoth SW4S 2.0 Purpose and Intended Use (Area) Landside and airside snow removal 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description Perkins 1104D-E44T 8.0 Auxiliary Engine Description N/A 9.0 Does the Equipment have optional attachments? Yes_X or No 10.0 Is the Equipment an Attachment? Yes or No_X_ 11.0 Type of Drive Unit required for attachment N/A 12.0 Warranty Information One year or 1000 hours TOTAL PRICE: $117,977 Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 High flow front hydraulics for front attachments $5, Wheel kit hydraulic ready (must select high flow front hydraulics) $2, Blue Strobe Light & Protection bar $ Amber Strobe with Protection Bars $ Air conditionning system $5, Push frame with quick attach system (required for any front attachme $3, Heavy duty snow blower (must select high flow front hydraulics) $22,002

14 13.8 Snow chute for heavy duty snow blower $1, Heavy duty snow blade $6, Heavy duty "V" plow $4, Standard salt and sand spreader $5, Wheel kit assembly, tires not included (must select wheel kit hydr.rea $10, Sidewalk tires with rims $3, Turf tires with rims $2,430 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Granby, QC Canada J2J 1E9

15 Price quote f 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pers Street Addre Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Z Phone #: Plainview, NY Toll Free #: Fax #: Addres pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Prinoth Husky 2.0 Purpose and Intended Use (Area) Landside and airside snow removal 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description Mercedes MTU OM 934 LA 8.0 Auxiliary Engine Description N/A 9.0 Does the Equipment have optional attachments? Yes_X or No 10.0 Is the Equipment an Attachment? Yes or No_X_ 11.0 Type of Drive Unit required for attachment N/A 12.0 Warranty Information One year or 1000 hours TOTAL PRICE: $208,347 Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 Preheating system 110V instead of 220V $ All year operational rubber tracks new type for New Husky 2500 $28, Blue Strobe Light & Protection bar $ solid rubber running wheels for tracks instead of air wheels $2, Air conditionning system $3, Snow Tiller F250 $18, Comfort drivers seat, seat heating and air cushioned $1,332

16 13.8 Wiper blade heating $2, LED Lighting package instead of Halogen $4, Rear view camera $ Snow deflector for Husky 2500 $ Front blade 12 way standard - Working width 11' $8, Compactor bar 1230 for New Husky 2500 $7,497 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Granby, QC Canada J2J 1E9

17 Price quote f 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pers Street Addre P.O. Box: City, State, Z Phone #: Toll Free #: Fax #: Addres Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court Plainview, NY pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Vammas PSB Purpose and Intended Use (Area) Runway, taxiway and apron snow removal 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) FOD sweeping 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description Volvo 4F, 475HP, Tier 4 Final 8.0 Auxiliary Engine Description Volvo 4F, 475HP, Tier 4 Final 9.0 Does the Equipment have optional attachments? Yes or No_X_ 10.0 Is the Equipment an Attachment? Yes or No_X_ 11.0 Type of Drive Unit required for attachment N/A 12.0 Warranty Information One year. Two years for engines. TOTAL PRICE: $955,000 Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 P8400 plow $42,500 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00/mile/truck (two trucks required) Starting Point: City, State, Zip: Ottumwa, IA 52501

18 Price quote f 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pers Street Addre Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Z Phone #: Plainview, NY Toll Free #: Fax #: Addres pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Vammas SB Purpose and Intended Use (Area) Runway, taxiway and apron snow removal 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) FOD sweeping 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description N/A 8.0 Auxiliary Engine Description Volvo 4F, 475HP, Tier 4 Final 9.0 Does the Equipment have optional attachments? Yes or No_X_ 10.0 Is the Equipment an Attachment? Yes_X or No 11.0 Type of Drive Unit required for attachment Truck chassis 12.0 Warranty Information One year. Two years for engines. TOTAL PRICE: $450,000 Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 P8400 plow $42, ETL-4 plow hitch $17,500 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Ottumwa, IA 52501

19 Price quote f 13.0 NON-MnDOT PRICE SCHEDULE AIRPORT AIRFIELD MAINTENANCE EQUIPMENT Vendor Nam Contact Pers Street Addre Fortbrand Services, Inc. Peter Stearn 50 Fairchild Court P.O. Box: City, State, Z Phone #: Plainview, NY Toll Free #: Fax #: Addres pstearn@fortbrand.com Item # Information Requested Answer 1.0 Airport Airfield Maintenance Equipment Make & Model Vammas ST (snow tractor) 2.0 Purpose and Intended Use (Area) Runway, taxiway and apron snow removal 3.0 Is Equipment Multi-functional? Yes_X_ or No 4.0 Is Equipment Multi-Seasonal? Yes_X_ or No 5.0 Additional Uses for Equipment (if any) FOD sweeping 6.0 Does Equipment have an Engine(s)? Yes_X_ or No 7.0 Drive Engine Description Volvo 4F, 475HP, Tier 4 Final 8.0 Auxiliary Engine Description N/A 9.0 Does the Equipment have optional attachments? Yes_X_ or No 10.0 Is the Equipment an Attachment? Yes or No_X_ 11.0 Type of Drive Unit required for attachment N/A 12.0 Warranty Information One year. Two years for engines. TOTAL PRICE: $417,500 Spec # Description Answer AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 P8400 plow $42, ETL-4 plow hitch $17,500 Cost per loaded mile for delivery of Airport/Airfield Equipment $10.00 Starting Point: City, State, Zip: Ottumwa, IA 52501