Airport Airfield Maintenance Equipment. Airport Airfield Maintenance Equipment Make & Model

Transcription

1 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment Airport Airfield Maintenance Equipment Make & Model Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? VENDOR TO PROVIDE FOLLOWING DETAIL Beam A9000 GRV Glycol Recovery, Fuel Spill Clean-up Additional usese for equipment (if any) Does equipment have an engine(s)? Drive engine description Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Term (months, years) Kenworth T370 chassis, Paccar PX-9 engine, 260HP (or equivalent) Mercedes-Benz 904, diesel One year or 2000 hours 13.1 AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options TOTAL PRICE: $315,000 (Includes $85,000 chassis allowance) 13.1 Rear door drain valve - 4 inch. for draining of water from hopper $ Heated Hopper Floor from Aux. Engine $9, Pump, hydraulically driven, approx 420 U.S g/m ( 1600 litres/m) $12, Load indicator for air spring suspension $ Air pressure draining and cleaning of low pressure water system $ Separate fuel tank for auxillary engine $3, Rear TV Waeco - duel color, sound $2,614 Delivery Starting Point Address Plainview, NY Price per loaded mile for delivery $15.00/mile

2 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment Airport Airfield Maintenance Equipment Make & Model Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? Additional usese for equipment (if any) Does equipment have an engine(s)? Drive engine description VENDOR TO PROVIDE FOLLOWING DETAIL Beam A9000 Runway Rubber Removal; FOD Removal; Apron Sweeping & Scrubbing Suction of Storm Drains; Glycol Recovery; Fuel Spill Cleanup; Hot Water Applications; General Street Sweeping; Removal of Construction Debris; Cleanup of Fuel Hydrant Pits; High-Pressure Hose Reel; Scrubbing of all Surfaces Mack MP7-345R, 345HP, diesel, 6 cyl (or equivalent) Auxiliary engine description Mercedes hp. Tier 4 Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Term (months, years) One year or 2000 hours 13.1 AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options TOTAL PRICE: $479,873 (Includes $130,000 chassis allowance)

3 "A9000 Hydrostatic sweeper for airport application Hopper 9m³ 304 stainless steel voided volume. Water tank capacity 2900L. Hydrostatic engine pack incl. hydrostatic transmission (High capacity fan) Tilt of Hopper, operated from cab Rear door, operated from cab Rear chute, 250mm 13.1 $282,922 On/off Ergo switch Mounting of hydraulic pump on PTO for tilt of hopper. By delivery of chassis the PTO must be mounted on the chassis engine or gear box Chassis preparation Wide suction between axles incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width" "A14000 Twin engined sweeper for airport application 14m³ 304 stainless steel voided volume. Water tank capacity app. 4500L Requires twin rear axles to provide sufficient payload capacity. Aux. engine JCB 129kW, Stage 3b / Tier 4 (std. fan) Tilt of Hopper, operated from cab Rear door, operated from cab 13.2 $276,552 Rear chute, 250mm On/off Ergo switch Mounting of hydraulic pump on PTO for tilt of hopper. By delivery of chassis the PTO must be mounted on the chassis engine or gear box. Chassis preparation Wide suction between axles incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width" "A14000 Hydrostatic sweeper for airport application 14m³ 304 stainless steel voided volume. Water tank capacity app. 4500L Requires twin rear axles to provide sufficient payload capacity. Hydrostatic engine pack incl. hydrostatic transmission (High capacity fan) Tilt of Hopper, operated from cab Rear door, operated from cab 13.4 $327,953 Rear chute, 250mm On/off Ergo switch Mounting of hydraulic pump on PTO for tilt of hopper. By delivery of chassis the PTO must be mounted on the chassis engine or gear box. Chassis preparation Wide suction between axles incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width" Pneumatic valve for extra water tank between cab and hopper (1100, 1500 or l). $1,271 In cab operation Extra water tank in hopper (600 l). Reduces voided volume by 0.6 m³ $5,184 Stainless steel 304 Extra water tank in hopper (1000 l). Reduces voided volume by 1.0 m³ $5,760 Stainless steel 304 Extra water tank between cab and hopper (1100 l) $15,097 Stainless steel 304 Extra water tank between cab and hopper (1500 l) $15,683 Stainless steel 304 Extra water tank between cab and hopper (2000 l) $16,213 Stainless steel Mesh in hopper, to be operated from cab $1, Tilt of hopper with manual hand pump. For emergency use $1, Hopper vibrator mounted at center plate $2, Hopper vibrator mounted at filter screen (JSL system) $1,605 Rubber chute mounted on rear plate $355 Protects rear of vehicle from discharged waste Rear chute = width 350mm. Stainless steel $526 Protects rear of vehicle from discharged waste (instead of, and replaces the standard 250mm rear chute). Inspection hatch in air channel $828 Give access for cleaning of air channel Side plates to match cab line $1,548 Used when cab height exceeds hopper height Centre Brushes

4 Wide Sweep Brush, pivoting 1275mm long, Ø400mm brush rings (instead of, and replaces the standard WSB 5" x 1300mm) For use with dual sweep $5,072 Centre brush, stationary 1600mm long, Ø400mm brush rings, 5" shaft. (instead of, and replaces the standard WSB 5" x mm) Not suitable for dual sweep Adjustment of revolutions Operated from inside cab Adjustment of revolutions Operated from outside cab $260 $1, Channel Brushes Rotatilt of right channel brush $2, Channel Brush, right - pushing $1, Rotatilt of left channel brush $2, Channel Brush, left - pushing $1, Simultaneous funtion. Channel brushes left + right and WSB run $3,111 Channel brush (for dual sweep), 750mm nozzle width. Ø300mm suction hose (Includes multi-coupling) Incl. intake duct flap valve in hopper. $24,757 FOR USE WITH HIGH CAPACITY FAN Channel brush (for dual sweep), 600mm nozzle width. Ø275mm suction hose Incl. intake duct flap valve in hopper. $21,238 FOR USE WITH STANDARD FAN Multi coupling at suction nozzle, right $ Multi coupling at suction nozzle, left $499 Brush unit, side sliding right, 160mm. Excl. WSB Pneumatic operation $2,333 Brush unit, side sliding left, 160mm. Excl. WSB Pneumatic operation $2,333 Brush unit, side sliding right, 200mm, hydraulic operation, incl. side-sliding of WSB assembly. $4,641 Brush unit, side sliding left, 200mm, hydraulic operation, incl. side-sliding of WSB assembly. $4,641 Brush unit, side sliding right, 400mm hydraulic operation, incl. WSB, stationary 1300mm long $6,140 Brush unit, side sliding right, 400mm hydraulic operation, incl. WSB, stationary 1600mm long $6,140 Brush unit, side sliding, right, 400mm hydraulic operation, incl. WSB, pivoting. $6, Brush unit, side sliding right, 400mm hydraulic, excl. WSB $5, Brush unit, side sliding left, 400mm hydraulic, excl. WSB $5, Brush frame, tilt capable right, $2, Brush frame, tilt capable, left, $2,230 Adjustment of revolutions for the rear brush Operated from inside cab $1,142 Adjustment of revolutions for the rear brush Operated from outside cab $ Cyclist protection mounted on the right side of the brush unit $2, Cyclist protection mounted on the left side of the brush unit $2, Cyclist protection mounted on the left side without the brush unit $1, Cyclist protection mounted on the right side without the brush unit $1,100 Water Systems & Related Items Air pressure draining and cleaning of low pressure water system $ Flushing of air channel, using an external water supply $ Flushing of air channel, using an internal water supply $ Special filter in hopper so that hopper can be used as water tank $6,615 Indicator for empty water tank Standard for high pressure pump $ Heat exchanger $1, " ball valve for draining of water tank $150 Hose reel 15m for low pressure water system Standard water pump $1, Detergent system incl. dosage unit, 25 l tank - "Tap Flo" $7,208 Detergent tank l with spray boom at front Pump bar $14,159 High pressure equipment l/min Incl. hose reel and 15m of hose. $10,427 Requires min. 16kw power. $750

5 High pressure equipment 106 l/min. Incl. hose reel and 15m of hose $23,725 Incl. adjustment of pressure from cab Requires min. 39kw power. High pressure equipment 106 l/min. Incl. hose reel and 15m of hose $30,429 Incl. adjustment of pressure from cab. Requires min. 52kw power. High pressure equipment l/min. Incl. hose reel and 15 m of hose $46,042 Incl. adjustment of pressure from cab. Requires min. 74kw power. High pressure equipment l/min Incl. hose reel and 15m of hose $46,042 Incl. adjustment of pressure from cab. Requires min. 74kw power. High pressure equipment l/min Incl. hose reel and 15m of hose $50,080 Incl. adjustment of pressure from cab. Requires min. 102kw power. High pressure equipment l/min. Incl. hose reel and 15m of hose $32,284 Incl. adjustment of pressure from cab. Requires min. 51kw power Spray bar, front mounted for standard water system $1, Spray bar, front mounted, fixed, left or right for high pressure $3, Spray bar, front mounted, pivoting (manually), left and right for high pressure $4, Spray bar, front mounted, (pneumatic) pivoting left/ right for high pressure. $5, Spray bar, front mounted, side sliding 750mm $5, Spray bar mounted behind wide sweep brush, with V-jets for high pressure $3,474 Spray bar, mounted behind the suction nozzle of a standard brush unit, RIGHT mm suction nozzle $2,021 Including V-jets. Water volume/spray boom approx. 25 l. Spray bar, mounted behind the suction nozzle of a standard brush unit, LEFT mm suction nozzle $2,021 Including V-jets. Water volume/spray boom approx. 25 l. Spray bar mounted behind right channel brush for high pressure system $1,869 l/min, controlled from the cab Spray bar mounted behind left channel brush for high pressure system $1,869 l/min, controlled from the cab Spray bar, mounted in front of wide suction, with V-jets for high pressure. $3, Spray bar, mounted behind wide suction, with V-jets for high pressure $3, Spray bar, mounted in front of wide suction, incl. rotating jets for high pressure $6, Spray bar mounted at right side of rear suction positioned manually $1, Spray bar mounted at left side of rear suction positioned manually $1, Pump, self-priming for filling in water from river, lake, water supply point etc. $9,144 Front Equipment Front brush up/down right side. Mounted underneath the front bumper - must be approved by dealer $9,814 Front brush up/down right side. Incl. extension. Mounted underneath the front bumper - must be approved by dealer $11,066 Front brush up/down left side. Mounted underneath the front bumper - must be approved by dealer $9,814 Front brush up/down left side. Incl. extension. Mounted underneath the front bumper - must be approved by dealer $11, Front brush, side sliding right 750mm. $12, Front brush, side sliding left 750mm. $12,581 Front brush, side sliding right 750mm. Hydraulic adjustment Incl. weed brush $15,747 Front brush, side sliding left 750mm. Hydraulic adjustment Incl. weed brush $15,747 Front brush, side sliding right 300mm + pneumatic extension 450mm (Total mm) Mounted underneath the front bumper - must be approved by dealer $14,185 Front brush, side sliding left 300mm + pneumatic extension 450mm (Total mm) Mounted underneath the front bumper - must be approved by dealer $14,185 Front brush, side sliding right 300mm. Hydraulic adjustment Incl. weed brush. Mounted underneath the front bumper - must be approved by $17,446 dealer Front brush, side sliding left 300mm. Hydraulic adjustment Incl. weed brush. Mounted underneath the front bumper - must be approved by $17,446 dealer

6 Reversible hydraulic motors (per brush) $970 Front brush side sliding 1100mm. Pivoting right + left Hydraulic adjustment. ITM OKBLR $29,493 Special front brush 1100mm - side sliding right 1100mm Incl. hydraulic adjustment $30,030 Special front brush 1100mm - side sliding left 1100mm Incl. hydraulic adjustment $30, Scraper, air operated, behind right front wheel. Side sliding 750mm $7, Scraper, air operated, behind left front wheel. Side sliding 750mm $7, Edge cutter behind right front wheel, side sliding 750mm $14, Edge cutter behind left front wheel, side sliding 750mm $14,508 Brush behind right front wheel side sliding 750mm Hydraulic adjustment, incl. weed brush $16,685 Brush behind right front wheel side sliding 750mm Hydraulic adjustment, incl. weed brush & spring relief $17,505 Brush behind left front wheel side sliding 750mm Hydraulic adjustment, incl. weed brush $16, Scraper behind front wheel 2500mm, perpendicular to direction of travel $19, Scraper behind front wheel 2500mm, 17 back from right front wheel $20, Scraper behind front wheel 2500mm, 17 back from left front wheel $20,116 Edge cutter for use with code Right $6,372 Edge cutter for use with code Left $6,372 Scraper for use with code Right $1,671 Scraper for use with code Left $1,671 Rear / Top Mounted Equipment Wander hose, rear mounted 2m elevation Ø170mm hose Electrically-pneumatically operated $8,048 Wander hose, rear mounted 3m elevation Ø170mm hose Electrically-pneumatically operated $8,735 Wander hose, rear mounted 2m elevation Ø200mm hose Electrically-pneumatically operated $8,354 Wander hose, rear mounted 2m elevation Ø170mm hose Spring-relieved $4,960 Wander hose, rear mounted, 2m elevation Ø200mm hose Spring-relieved $6, Closure flap for rear mounted wander hose $1,305 Top mounted wander hose Ø150mm Spring-relieved $5,283 Top mounted wander hose Ø200mm Spring-relieved $5,792 Top mounted wander hose Ø200mm Hydraulic operation $8,583 Top mounted wander hose Ø150mm Hydraulic operation $8, Rear TV Waeco - Single Colour, sound, flat screen $1, Rear TV Waeco - Dual Colour, sound, flat screen $2,467 Additional Options Tool box 400 x 400 x 400mm $ Rear door drain valve - 3 inch. for draining of water from hopper $ Rear door drain valve - 4 inch. for draining of water from hopper $ Water tank inlet filter (supplied loose) $ Load indicator for standard spring suspension $ Load indicator for air spring suspension $615 Mounting of manual water valves in cab for adjustment of water volume. Incl water valve for automatic closing when sweep gear is in raised position $4, Illumination of control panel $ Reverse Audible Warning Device $117 Central lubrication, single including Chassis Excluding lubrication of rear door and inspection hatch $10,340 Central lubrication, single excluding Chassis Excluding lubrication of rear door and inspection hatch $8,722 Central lubrication, dual including Chassis Excluding lubrication of rear door and inspection hatch $13,055 Central lubrication, dual excluding Chassis Excluding lubrication of rear door and inspection hatch $11, Central lubrication Additional price for demount system $3,350

7 Central lubrication Additional price for extra brush, scraper etc. $1,566 Grease points (centrally placed) for brush unit, primary side (18 pcs. grease points), locking system (9 pcs. grease points) and motor shaft (2 pcs. grease $4,636 points) Grease points for brush unit, secondary side (18 pcs. grease points). $2, Extra beacon mounted on hopper (2 are standard) $ Extra beacon mounted on cab $ Extra Spotlight, LED $ pcs. blitz light (rectangular), fitted in front of vehicle $ pcs. blitz light (rectangular), fitted on the rear of vehicle $ Beacon as blitz light (per beacon). $ Ability to fill from a hydrant on either side of machine. $ Facility to carry spare channel brush (spare brush not included) $ Broom & Shovel Stowage $ Indicator for semi-empty hydraulic tank (price per tank) $ Additional work lights on rear of vehicle (x2) $ Mounting of work light in engine compartment $ Indicator for empty detergent tank $ emergency stop mounted in cab $ emergency stop mounted outside $356 Chassis Related Items Separate hydraulic tank, approx. 150 litres $3,847 Separate fuel tank for auxiliary engine Manual tank gauge $3, Indicator (electric) for empty fuel tank $1,259 Switches mounted in chassis dash board Volvo, MAN, Mercedes-Benz Standard for Scania chassis, but please note that the Scania chassis must be $2,246 ordered with an extra long dash board Wide Suction Systems Wide suction mounted behind the rear axle. 2500mm Chassis to be with rear air suspension $29, Special side suction for use with $1, Rotor Cleaner System mounted behind the rear axle. $57,926 Demount Systems Demount system frame, detachable S / A 9000 $2, Demount system frame, detachable S / A $3, Extra supporting legs - 4 pcs. $4,956 Airport Sweeping- / Suction Systems Front mounted pivoting roller brush. 2600mm width. 22. ø800mm. ITM VKM Front mounted pivoting roller brush. 2500mm width. 22. ø800mm. ITM VKM $46,810 $45, Front mounted pivoting roller brush. 3500mm width 22. Ø900mm ITM VKM 400 $64, Magnet, front mounted $15,051 Magnet, rear mounted $15,051 Chassis + specification need to be approved by BEAM A/S "Wide suction between axles 2400mm for liquid recovery. High speed runway and taxiway sweeping (instead of, and replaces the standard $26, Wide suction between axles Incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width)" "Wide suction between axles Incl. 1100mm side brushes, brush behind suction nozzle and a 3rd brush. 2400mm width (instead of, and $14,160 replaces the standard Wide suction between axles Incl. 1100mm side brushes & brush behind suction nozzle, 2400mm width)" Delivery Starting Point Address Plainview, NY Price per loaded mile for delivery $15.00/mile

8 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment Airport Airfield Maintenance Equipment Make & Model Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? Additional uses for equipment (if any) Does equipment have an engine(s)? Drive engine description Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Info VENDOR TO PROVIDE FOLLOWING DETAIL Bergkamp FP5 Flameless Pothole Patcher Airside and landside pothole and asphalt repair Yes or No_X_ Sander Yes or No_X_ Yes_X_ or No Yes_X_ or No Truck chassis One year TOTAL PRICE: $92, AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 Mounting on Truck $5, Single Drum Roller (Incl platform modification) $7, Sand Spreader $9, Strobe light - dual LED $1, Backup camera with night vision and sound $1, Cone holder $ Tool holder $ LED lighting system $1, Strobe Light - dual $ Night Work Lights $ Asphalt Rake $ Swing Auger $9, Gal Emulsion Tank (ILO 80 Gal Std) $3, Cleaning fluid on hose reel $ Second hose reel (Air and tack hose reel) $ Pavement breaker tools: tamper, chisel, shank $ Arrow board - Able 2, 10 light, LED $ DOT arrow board - 30" x 60", 15 light, incandescent $2, DOT arrow board - 30" x 60", 15 light, LED $3, Single strobe light - LED $ Custom color - hopper body only $ Spare parts kit $1,590 Delivery Starting Point Address Salina, KS Price per loaded mile for delivery $15.00/mile

9 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment Airport Airfield Maintenance Equipment Make & Model Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? Additional usese for equipment (if any) Does equipment have an engine(s)? Drive engine description Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Term (months, years) TOTAL PRICE:

10 13.1 AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 Preheating system 110V instead of 220V 13.2 All year operational rubber tracks new type for New Husky Blue Strobe Light & Protection bar solid rubber running wheels for tracks instead of air wheels 13.5 Air conditionning system 13.6 Snow Tiller F Comfort drivers seat, seat heating and air cushioned 13.8 Wiper blade heating 13.9 LED Lighting package instead of Halogen Rear view camera Snow deflector for Husky Front blade 12 way standard - Working width 11' Compactor bar 1230 for New Husky 2500 Delivery Starting Point Address Price per loaded mile for delivery

11 VENDOR TO PROVIDE FOLLOWING DETAIL Prinoth Husky Landside and airside snow removal Mercedes MTU OM 934 LA Yes_X_ or No One year or 1000 hours $181,050

12 r $378 $27,627 $271 $2,632 $3,342 $18,197 $1,305 $2,197 $4,051 $470 $470 $8,423 $7,347 Granby, Quebec, Canada J2J 1E9 $15.00/mile

13 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment Airport Airfield Maintenance Equipment Make & Model Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? VENDOR TO PROVIDE FOLLOWING DETAIL Prinoth SW4S Landside and airside snow removal Additional usese for equipment (if any) Does equipment have an engine(s)? Drive engine description Perkins 1104D-E44T Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Term (months, years) Yes_X_ or No One year or 1000 hours TOTAL PRICE: $113, AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 High flow front hydraulics for front attachments $5, Wheel kit hydraulic ready (must select high flow front hydraulics) $2, Blue Strobe Light & Protection bar $ Amber Strobe with Protection Bars $ Air conditionning system $5, Push frame with quick attach system (required for any front attachment) $3, Heavy duty snow blower (must select high flow front hydraulics) $20, Snow chute for heavy duty snow blower $1, Heavy duty snow blade $6, Heavy duty "V" plow $4, Standard salt and sand spreader $5, Wheel kit assembly, tires not included (must select wheel kit hydr.ready) $10, Sidewalk tires with rims $3, Turf tires with rims $2,289 Delivery Starting Point Address Price per loaded mile for delivery Granby, Quebec, Canada J2J 1E9 $15.00/mile

14 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment VENDOR TO PROVIDE FOLLOWING DETAIL Airport Airfield Maintenance Equipment Make & Model Vammas SB 5500 Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? Additional uses for equipment (if any) Does equipment have an engine(s)? Drive engine description Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Info Runway, taxiway and apron snow removal F.O.D. sweeping Volvo 4F, 475HP, Tier 4 Final Yes_X_ or No Truck chassis One year. Two years for engine. TOTAL PRICE: $570, AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 P8400 Plow $42, ETL-4 plow hitch $16,500 Delivery Starting Point Address Ottumwa, IA Price per loaded mile for delivery $15.00/mile

15 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment VENDOR TO PROVIDE FOLLOWING DETAIL Airport Airfield Maintenance Equipment Make & Model Vammas SB 4500 Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? Additional uses for equipment (if any) Does equipment have an engine(s)? Drive engine description Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Info Runway, taxiway and apron snow removal F.O.D. sweeping Volvo 4F, 475HP, Tier 4 Final Yes_X_ or No Truck chassis One year. Two years for engine. TOTAL PRICE: $531, AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 P5600 Plow $34, ETL-4 plow hitch $16,500 Delivery Starting Point Address Ottumwa, IA Price per loaded mile for delivery $15.00/mile

16 Vendor Name: Fortbrand Services, Inc. Contact Person: Peter Stearn Street Address: 50 Fairchild Court P.O. Box: City, State, Zip: Plainview, NY Phone #: Toll Free #: Fax #: Address: Website: PRICE SCHEDULE 13.0 Airport Airfield Maintenance Equipment VENDOR TO PROVIDE FOLLOWING DETAIL Airport Airfield Maintenance Equipment Make & Model Vammas SB 5500 Purpose and intended use (Area) Is equipment multi-functional? Is equipment multi-seasonal? Additional uses for equipment (if any) Does equipment have an engine(s)? Drive engine description Auxiliary engine description Does the equipment have optional attachments? Is the equipment an attachment? Type of drive unit required for attachment Warranty Info Runway, taxiway and apron snow removal F.O.D. sweeping Volvo 4F, 475HP, Tier 4 Final Yes_X_ or No Truck chassis One year. Two years for engine. TOTAL PRICE: $570, AIRFIELD EQUIPMENT OPTIONS: Use this section to offer other options for airfield equipment listed above. Start option numbering with 13.1, 13.2, 13.3, etc., until you have listed all of the options 13.1 P8400 Plow $42, ETL-4 plow hitch $16,500 Delivery Starting Point Address Ottumwa, IA Price per loaded mile for delivery $15.00/mile