First Class attachments

Size: px

Start display at page:

Download "First Class attachments"

Clarence Tyler
5 years ago
Views:

Summer Spring & Fall Winter First Class attachments Why? FCA is your one stop shop when it comes to attachments, presenting the leading attachment manufacturers from North America and Europe.

1 Summer Spring & Fall Winter First Class attachments Why? FCA is your one stop shop when it comes to attachments, presenting the leading attachment manufacturers from North America and Europe. We have found the best of the best and collected them all in one place to make finding the perfect attachment for your needs easier. We are located in Vankleek Hill, Ontario, half way between Ottawa and Montreal. Our goal is to meet all your needs for all seasons. We have in house manufacturing and highly trained staff. Whether you are looking for a one off solution or attachments for your entire fleet FCA can help. DISCLAIMER Different tractors may have different requirements. The fields that are blank vary depending on the equipment used. Errors and omissions excepted. Prices subject to change without notice. Prices in CDN dollars.

2 Clearing Width Chart Straight (Width of Plow) Tilt angle 25 Tilt angle 30 Tilt angle 35 cm Inch cm Inch cm Inch cm Inch Formula Used Plow Width Cos (Tilt Angle) = Clearing Width Example: 50 Plow Tilt angle 35 Plow Width Cos (35) = Clearing Width = Clearing Width Tilt Angle

3 Index Miscellaneous Fiedler Reversible Flail Arm FFA 400 K GMR Front Shovel FS 1100, FS 1300 GMR Edge Cutter UF 150 R Cutting Edges Mutter Steel Blade MS Mutter Combination Blade MK Mutter Rubber-Ceramic Blade MGK Mutter Rubber Blade MG Mutter Elastomer Blade MEG 90 Mutter Rubber-Texture Blade GG Mutter Polyurethane Blade PCS Greenline How to Pick the Right Blade Types of Blades Blade Order Form Blowers Metec Snow Blower Zaugg Small Snow Blower Zaugg Medium Snow Blower Zaugg Large Snow Blower SB44-1, SB50-1, SB60-1, SB72-1 SF40, SF55, SF55E SF65E, SF72E, SF72 SF90, SF110 Water Tanks Fiedler Water Tank FTS 650, FTS 975 Metec Water Tank WT 175-1, WT Plows Metec Folding V Plow Metec 3 Point Hitch Angled Plow GMR Medium Snow Blade Pressure Washers Fiedler Spray Bar FSB 1500 Fiedler Brine Sprayer FSSA 650, FSSA 975 Metec Pressure Washer HPWS-1 Spreaders Metec Drop Sander DS40-1, DS44-1, DS60-1 Fiedler Drop Gritter FWS 200 XL Fiedler Combi Spreader FWS 200 XL Fiedler Flat Silo Spreader FSS 650, FSS 800 FVP61-1, FVP66-1, FVP71-1 FAP50-1, FAP55-1, FAP60-1 FS 1300 M/MK, FS 1500 M/MK, FS 1700 M/MK, FS 2000 M/MK

4 Sweepers & Brushes Metec Sweeper HS/MS48-1, HS/MS60-1, HS/MS72-1 Fiedler Light Front Sweeper FKM 1210, FKM 1310, FKM 1410, FKM 1510 Fiedler Heavy Front Sweeper FKM 1300, FKM 1500 Fiedler Side Driven Front Sweeper FFK 1310, FFK 1610 GMR Sweeper FH 1100 P, FH 1200 P, FH 1300 P, FH 1400 P, FH 1500 P, FH 1600 P, FH 1800 P, FH 2000 P GMR Medium Street Sweeper HF 1200 MF, HF 1300 MF, HF 1500 MF, HF 1700 MF, HF 2000 MF GMR Medium Street Sweeper FF/HF 1200 MA, FF/HF 1300 MA, FF/HF 1500 MA, FF/HF 1700 MA GMR Heavy Street Sweeper FF/HF 1300 PA, FF/HF 1500 PA, FF/HF 1700 PA, FF/HF 2000 PA, FF/HF 2200 PA GMR Suction Unit Street Sweeper FSA-V 500, FSA-V 1000 GMR Environment Sweeper UK 425 R/L, UK 475 R/L, UK 725 R/L, UK 600 MDS, UK 600 HDS Mowers GMR Heavy Rotary Mower FM/FH 1500 P, FM/FH 1800 P, FM/FH 2100 P GMR Light Rotary Mower TM/TH 1500, TM/TH 1800 GMR Light FR Rotary Mower FR 1500 LM/LH, FR 1800 LM/LH GMR Side Discharge Rotary mower HC/HCH 1500 A, HC/HCH 1800 A GMR Grass Collecting Container SC 1200, SC 2000 GMR Triplex Rotary Mower TH/THM 2500, TH/THM 3000 GMR Triplex Rotary Mower TH 2500 C, TH 3000 C GMR Easy Flail Mower SK 1300 MM/MH, SK 1500 MM/MH, SK 1700 MM/MH GMR Heavy Flail Mower SK 1500 PM/PH, SK 2000 PM/PH GMR Reel Mower with Ransomes 3 RD Ran, 5 RD Ran, 5+2 RD Ran Watering Arms Please Inquire - Coming Soon

5 Miscellaneous

Branch cutter, Hedge trimmer, Earth auger with a drill, Ditch digger, Stump grinder.

6 Reversible Flail Arm FFA 400 K Communal front extension arm. Available attachments: Flail head, Flat flail head, Weed brush, Water sprinkler, Guide post washing brush, Electric pump, Branch cutter, Hedge trimmer, Earth auger with a drill, Ditch digger, Stump grinder. Model Weight Overall Width Overall Height Overall Length Options FFA 400 K PLEASE INQUIRE Front adapter for 3 point linkage CAT1, Control via original joystick of the CX, Flat sealing couplings Counter plate with mushroom, Optional colours

7 Front Shovel - FS FS 1100, FS 1300 Front shovel with hydraulic tilt. For compact tractors and small tool carriers. Central tilt cylinder. Mounting 3 point or A frame Cat 1. Length and weight depend on frame type. Model FS 1100 FS 1300 Weight 231lbs (105kg) 276 (125kg) Width 24 (60cm) Height 24 (60cm) Hydraulic Tilt Cylinder 1 pcs Operating Width 43 (110cm) 51 (130cm) Volume (130 litres) (150 litres) 3 Point or A Frame CAT 1 Options

Support wheel for the cutter depth adjustable in width to the various tool carriers.

8 Edge Cutter UF 150 R Hydraulic driven edge cutter with hydraulic lifting and swiveling. Fitted with roller blades and sharp cutter knives. Support wheel for the cutter depth adjustable in width to the various tool carriers. Can be flipped over for working on the left. Model Weight Width Length Cultivating Width Cultivating Depth Cutter Adjustment Options UF 150 R (120kg) 61 (155cm) 41 (105cm) 6 (15cm) 1-3 (3-8cm) Hydraulic

9 Cutting Edges

Users, who are looking for an aggressive snow removal and a long service life are well served with the MUTTER MS.

10 Steel Blades MS MUTTER steel blades are made of high quality wear-resistant steel with a hardness between 450 and 525 brinell. In this context, the steel blade easily removes frozen snow and even relieves icy roads. Users, who are looking for an aggressive snow removal and a long service life are well served with the MUTTER MS. Any and all issues regarding snow plowing are solved with ease, no matter in which altitude your work takes place. * *MUTTER does not recommend steel blades on cobblestone pavement Your benefits at a glance: low priced long service life very aggressive highly tempered steel of HB available in 150 x 20 mm or 200 x 20 mm Mounting aid: moldboard end stop shock absorber MS steel blade Suitable for the following use: highway regular road in town

Combination Blade MK The MUTTER combination blade is a composite blade, made of wear-resistant steel with a hardness of 450 brinell and rubber, which was designed for especially high performances and

11 Combination Blade MK The MUTTER combination blade is a composite blade, made of wear-resistant steel with a hardness of 450 brinell and rubber, which was designed for especially high performances and specially formed ceramic parts. The combination of those three materials provides aggressive snow removal and very good sliding properties as well. Due to the long service life and consumption saving characteristics, the high performance combination blade is very cost saving in addition. Your benefits at a glance: cost saving and noise absorbing very good sliding properties aggressive snow removal long service life available in 25, 36 or 50 mm thickness Mounting aid: moldboard shock absorber MS combination blade Suitable for the following use: highway regular road in town

Rubber-CERAMIC Blade MGK MUTTER rubber-ceramic blades are made of a specific rubber mix, which was designed for

compared to rubber or polyurethane blades.

Additionally the special form provides better sliding properties and smooth running.

12 Rubber-CERAMIC Blade MGK MUTTER rubber-ceramic blades are made of a specific rubber mix, which was designed for especially high performances and are available with or without an additional steel blade to secure the right assembly of specific snow plows. This blade contains ceramic pieces, which are embedded in the middle of blade to guarantee a long service life compared to rubber or polyurethane blades. The ceramic is specially formed to protect them against slipping or breaking. Additionally the special form provides better sliding properties and smooth running. Your benefits at a glance: gentle removal good sliding properties available with or without steel insert long service life available in 42 mm or 50 mm thickness Mounting aid: moldboard steel insert for mounting MGK rubber-ceramic blade Suitable for the following use: limited use on airport runways regular road in town applicable on cobblestones

These blades are developed and designed to absorb any noise. This secures a low-noise and gentle removal. Therefore, these rubber blades are often used on sensitive routes like cobblestone pavement.

13 Rubber Blade MG MUTTER rubber blades are made of a special rubber mix, which was designed for especially high performances. Rubber blades are manufactured as molded parts and are available with or without an additional steel blade to secure the right assembly to specific snow plows. These blades are developed and designed to absorb any noise. This secures a low-noise and gentle removal. Therefore, these rubber blades are often used on sensitive routes like cobblestone pavement. Your benefits at a glance: noise absorbing and very gentle removal wear-resistant for mud and light snow available with or without steel blade available in 42 mm or 50 mm thickness Mounting aid: moldboard terminal strip MG rubber blade Suitable for the following use: regular road in town applicable on cobblestones airport runways

14 Elastomer Blade MEG 90 MUTTER MEG 90 blades have been developed especially for the usage with smaller equipment, such as smaller ploughs. It enables you to clear the road even more efficient and more economizing. Our Elastomer blade stands out with a hardness of 90 Shore. Furthermore, it is extremely gentle, stable and resistant, which makes it an economic alternative compared to polyurethane blades. Wherever you need to go easy on sensitive undergrounds, the MEG 90 might be the perfect solution! Additionally MUTTER solutions is able to offer different profiles, depending on your plough. Your benefits at a glance: cost-efficient wear-resistant gentle removal with or without ceramic available in various measurements Suitable for the following use: in town applicable on cobblestones airport runways

Rubber-Texture Blade GG MUTTER rubber-texture blades are strengthened through the use of embedded texture. As a result, these blades are very wear-resistant, hardy and tough.

15 Rubber-Texture Blade GG MUTTER rubber-texture blades are strengthened through the use of embedded texture. As a result, these blades are very wear-resistant, hardy and tough. At the same time, rubber-texture blades are extremely elastic and shock absorbing. These aforementioned characteristics, make this blade is a very efficient yet gentle and resistant alternative, which is highly recommended for the snow removal on cobblestone pavement. Your benefits at a glance: shock absorbing gentle removal, applicable on cobblestone great performance on uneven grounds longer service life through embedded texture available in various measurements Suitable for the following use: in town applicable on cobblestones airport runways

Polyurethane Blade PCS Die MUTTER PCS Greenline blade combines all advantages of the high tech plastic polyurethane with the production possibilities of our MUTTER manufacturing.

Thus we can offer common blades as well as individual measurements there is no limit! Due to a hardness of 90 Shore A, the PCS is both, tremendously wearresistant and elastic.

16 Polyurethane Blade PCS Die MUTTER PCS Greenline blade combines all advantages of the high tech plastic polyurethane with the production possibilities of our MUTTER manufacturing. The PCS is best suited for small devices on parking lots, small roads and sidewalks. Thanks to our production capability s, this blade can be offered in various length, widths and thicknesses. Thus we can offer common blades as well as individual measurements there is no limit! Due to a hardness of 90 Shore A, the PCS is both, tremendously wearresistant and elastic. It can be used everywhere, regardless the surfaces of the roads, the snowplow or weather conditions - a true advantage over comparable blades. Your benefits at a glance: shock absorbing and low-noise gentle removal great performance on uneven grounds drillings or 45 bevels upon request standardized or individual measurements Suitable for the following use: in town applicable on cobblestones airport runways

17 How to Pick the Right Blade The following overview contains all characteristics and benefits in a direct comparison and serves as a decision support. It helps to figure out, which blade matches your needs and requirements best. Still undecided? We look forward to receiving your or your call! MS steel MK combination MGK rubber-ceramic MG, MEG, GG, PCS rubber, polyurethane service life aggressiveness removing ice sliding properties shock absorbing* *MS, MK incl. shock absorbers ground protection low-noise cobblestone dirt roads

Due to our technical skills as well as a high knowledge and experience,

18 Types of Blades MUTTER cutting edges are manufactured individually to fit any snow plough perfectly. Due to our technical skills as well as a high knowledge and experience, we are able to optimize snow plowing purposefully. As a result, our cutting edges are available in many different types.

19 Blade Order Form Your Inquiry Quotation Order Other: Your Contact Name Street ZIP/Postal Code Phone Fax Mr. Cutting Edges Steel MS 150 x 20 Combination MK 25 Ms. Rubber-Ceramic MGK 42 Rubber MG Rubber-Texture GG Steel MS 200 x 20 Combination MK 36 First Name Company State/Province/ Territory County Rubber-Ceramic MGK 50 Elastomer MEG 90 Polyurethane PCS Greenline Combination MK 50 Amount needed (Sets): After completing this form please it to info@firstclassattachments.com or fax it to (613)

edge): L: L: H: H: R: R: B1: B1: B2: B2: D: D: Yes No Number of inner blades: S (bevelled edge):

20 Blade Order Form Please indicate all measurements in millimeters. Plow Manufacturer Plow Type Year of Construction Attack Angle L: H: R: B1: B2: D: S (bevelled edge): L: L: H: H: R: R: B1: B1: B2: B2: D: D: Yes No Number of inner blades: S (bevelled edge): Yes No Number of holes: Number of holes: Number of holes: Ø drilling holes: Ø drilling holes: Ø drilling holes: Your questions and comments:

21 Blowers

Snow Blower SB44-1, SB50-1, SB60-1, SB72-1 This double 15 diameter auger, two-stage design can fit

It is ideal for routine snow removal tasks, such as sidewalk and parking lot clearing, and is ideal

50 $9,802 $10,088 $10,220 Weight 760lbs (344kg) 1022bs (463kg) 1102lbs (500kg) 1187lbs (538kg)

Auger Diameter 15 (38cm) Power Requirements 40HP (30kW) 60HP (45kW) Turbine Diameter 3 blade 24

22 Snow Blower SB44-1, SB50-1, SB60-1, SB72-1 This double 15 diameter auger, two-stage design can fit any size tractor (over 40HP). It is ideal for routine snow removal tasks, such as sidewalk and parking lot clearing, and is ideal for truck charging during snow clearing operations. Model SB44-1 SB50-1 SB60-1 SB72-1 Price $9, $9,802 $10,088 $10,220 Weight 760lbs (344kg) 1022bs (463kg) 1102lbs (500kg) 1187lbs (538kg) Clearing Width 44 (112cm) 50 (127cm) 60 (152cm) 72 (183cm) Overall Width Overall Height Cutting Auger Diameter 15 (38cm) Power Requirements 40HP (30kW) 60HP (45kW) Turbine Diameter 3 blade 24 (60cm) Powder coated orange, 540 rpm gearbox, Hardox skid shoe & cutting edge CAT 1 or CAT II Options LED working lights, Truck load chute 60 (150cm), Custom colours, 4 Blade turbine

Snow Blower - SMALL SF40, SF55, SF55E ZAUGG designs the ejection chutes to have the maximum casting distance, so that you can aim the snow where you want it.

Model SF40 SF55 SF55E Weight 200-240lbs (91-109kg) 390-620lbs (177-281kg) 340-400lbs (154-181kg) Clearing Width 31-47 (79-119cm) 33-71 (84-180cm) 33-51 (84-130cm) Overall Width Overall Height Cutting

23 Snow Blower - SMALL SF40, SF55, SF55E ZAUGG designs the ejection chutes to have the maximum casting distance, so that you can aim the snow where you want it. The cutters are made with an serrated edge to cut through hard packed snow and break up ice easily. The cutting edge that touches the ground is made from Hardox so that it doesn t wear down quickly. Model SF40 SF55 SF55E Weight lbs (91-109kg) lbs ( kg) lbs ( kg) Clearing Width (79-119cm) (84-180cm) (84-130cm) Overall Width Overall Height Cutting Auger Diameter 16 (41cm) 22 (56cm) 22 (56cm) Power Requirements 10-27HP (7.5-20kW) 14-55HP ( kW) 11-30HP (8-22kW) Turbine Diameter (33-43cm) (46-53cm) 18 (46cm) Options Hardox skid shoe & cutting edge CAT I or CAT II Working lights, Truckload chute, Custom color, Auger wear rings, 1000 rpm gearbox, Hydraulic drive, Ratchet style auger clutch

Snow Blower - Medium SF65E, SF72E, SF72 ZAUGG offers 3 models of ejection chutes - a basic economy model, lightweight stainless steel model and a strengthened steel chute to handle constant rocks /

Model SF65E SF72E SF72 Weight 710-880lbs (322-399kg) 990-1150lbs (449-522kg) 1280-1940lbs (581-880kg) Clearing Width 47-79 (119-201cm) 55-97 (140-246cm) 55-97 (140-246cm) Overall Width Overall Height

24 Snow Blower - Medium SF65E, SF72E, SF72 ZAUGG offers 3 models of ejection chutes - a basic economy model, lightweight stainless steel model and a strengthened steel chute to handle constant rocks / debris. These chutes are designed to provide maximum casting distance. The cutters are designed to eat through hard packed snow and break up solid ice. Model SF65E SF72E SF72 Weight lbs ( kg) lbs ( kg) lbs ( kg) Clearing Width ( cm) ( cm) ( cm) Overall Width Overall Height Cutting Diameter 26 (66cm) 28 (71cm) 28 (71cm) Power Requirements 41-70HP ( kW) HP ( kW) HP ( kW) Turbine Diameter 24 (61cm) 28 (71cm) 28 (71cm) Options Hardox skid shoe & Cutting edge CAT I or CAT II Working lights, Truckload chute, Custom colours, Auger wear rings, 1000 rpm gearbox, Hydraulic drive

constant rock/debris. Chute extensions for truck loading are also available.

25 Snow Blower - Large SF90, SF110 ZAUGG builds the ejection chute to achieve the farthest casting distance. With the larger snow blowers, ZAUGG offers 3 chute styles- a lightweight economy chute, stainless steel model with a curved shape for the best snow casting, and a strengthened version to handle constant rock/debris. Chute extensions for truck loading are also available. Model SF90 SF110 Weight lbs ( kg) lbs ( kg) Clearing Width ( cm) ( cm) Overall Width Overall Height Cutting Diameter 35 (89cm) 45 (114cm) Power Requirements HP ( kW) HP (97-306kW) Turbine Diameter (71-99cm) ( cm) Hardox skid shoes & Cutting edges CAT II CAT III Options Work lights, Truckload chute, Custom colours, Auger wear rings, Ratchet style auger clutch

26 Water Tanks

Model FTS 650 FTS 975 Weight Volume 142 IG (650 liters) 214 IG (975 liters) Height 47 (120cm) 63 (160cm) Width 44 (113cm) 44 (113cm) Length 35 (90cm) 35

27 Water Tank FTS 650, FTS 975 Capacity to hold between 650 to 975 Litres. Made of PE the tank is UV and shock resistant. Standard anti splash walls and water filter filling via C-connector. Model FTS 650 FTS 975 Weight Volume 142 IG (650 liters) 214 IG (975 liters) Height 47 (120cm) 63 (160cm) Width 44 (113cm) 44 (113cm) Length 35 (90cm) 35 (90cm) Options Support legs for FTS, Wheels for support legs, LED amber beacon on the water tank, Tool for filling from public waters, Filling from the top via C-connector, High/Medium/Low pressure pump hydr., High/ Medium/Low pressure hose between rear and front attachment.

Water Tank WT 175-1, WT 250-1 Model WT 175-1

28 Water Tank WT 175-1, WT Model WT WT Price $3,523 $3,625 Weight Volume 175 IG (795 liters) 250 IG (1130 liters) Height Width Length Aluminum mounting frame Options

29 Plows

Folding V Plow FVP61-1, FVP66-1, FVP71-1 Hydraulic adjustment of plow blades gives operators a choice of 7 positions for snow removal, a versatile unit in place of fixed V and angle plows.

50 $8,996 $9,464 Weight 546lbs (248kg) 573lbs (260kg) 605lbs (275kg) Clearing Width 60 (152cm) 66 (168cm) 70 (178cm) Overall Width Overall Height Mouldboard Height 30 (76cm) Swing Angle 30 Power

30 Folding V Plow FVP61-1, FVP66-1, FVP71-1 Hydraulic adjustment of plow blades gives operators a choice of 7 positions for snow removal, a versatile unit in place of fixed V and angle plows. Operators can control the angle of the plow to suit different snow conditions. Hardox cutting edge and skid shoe standard. Model FVP61-1 FVP66-1 FVP71-1 Price $8, $8,996 $9,464 Weight 546lbs (248kg) 573lbs (260kg) 605lbs (275kg) Clearing Width 60 (152cm) 66 (168cm) 70 (178cm) Overall Width Overall Height Mouldboard Height 30 (76cm) Swing Angle 30 Power Requirements 40HP (30kW) 80HP (60kW) Cutting Edges Options Rubber, UHMW, Mild steel, Stainless steel, Corrundum, PU, Vulcalon, Carbide, Hardox Hydraulic adjustment of plow blades, 7 positions CAT I or CAT II LED working lights, Caster wheels, Curb wear block, Marker flags, Custom colours, Other sizes available please inquire.

3 Point Hitch Angled Plow AP50-1, AP55-1, AP60-1 An economical plow design that will mate with any

Ideal for snow removal operations in urban areas, such as sidewalks and parking areas.

Model AP50-1 AP55-1 AP60-1 Price $6,383 $6,513 $6,643 Weight 490lbs (222kg) 550lbs (249kg) 573lbs

38 (97cm) Swing Angle 30 Cutting Edges Power Requirements Options Style 2 Rubber, UHMW, Mild steel,

31 3 Point Hitch Angled Plow AP50-1, AP55-1, AP60-1 An economical plow design that will mate with any size tractor over 40HP. Ideal for snow removal operations in urban areas, such as sidewalks and parking areas. Hardox cutting edge and skid shoe standard. Model AP50-1 AP55-1 AP60-1 Price $6,383 $6,513 $6,643 Weight 490lbs (222kg) 550lbs (249kg) 573lbs (260kg) Clearing Width 50 (127cm) 55 (140cm) 60 (152cm) Overall Width Overall Height Mouldboard Height 38 (97cm) Swing Angle 30 Cutting Edges Power Requirements Options Style 2 Rubber, UHMW, Mild steel, Stainless steel, Corrundum, PU, Vulcalon, Carbide, Hardox 40HP (30kW) Style 1 Hardox cutting edge, hydraulic angling, rubber deflector LED working lights, Curb wear block, Marker flags, Manual angling of blade, Custom colours. Other sizes available please inquire.

32 Snow Blade - Medium FS 1300 M/MK, FS 1500 M/MK, FS 1700 M/MK, FS 2000 M/MK Front mounted snow blade with spring arrangement securing the blade at collision. Hydraulic angling, replaceable rubber, steal or Vulcolan share, adjustable skid pans, supporting legs. Image coming soon Model FS 1300 FS 1500 FS 1700 FS 2000 Weight lbs ( kg) lbs ( kg) lbs ( kg) lbs ( kg) Clearing Width at Total Angling 46 (118cm) 54 (136cm) 61 (154cm) 71 (181cm) Overall Width 51 (130cm) 59 (150cm) 67 (170cm) 79 (200cm) Overall Height 26 (65cm) Angling - Hydraulic 25 right/left - 1 swing cylinder Options Rubber shar, Vucolan shar, light kit, pendling suspension, supporting leg(s)

33 Pressure Washers

max angle of 32 Swiveling Right/Left Hydraulic Overall

34 Spray Bar FSB 1500 Model FSB 1500 Weight 154lbs (70kg) Overall Width 59 (150cm) Working Width 51 (130cm) at max angle of 32 Swiveling Right/Left Hydraulic Overall Length Options Anti spray guard with stainless steel holder

Brine Sprayer FSSA 650, FSSA 975 Working width extendable

214 IG (972 liters) Height 47 (120cm) 63 (160cm) Width 44

Support legs for FTS, Wheels for support legs, Special side

35 Brine Sprayer FSSA 650, FSSA 975 Working width extendable to 3.3m through the two side jet nozzles. With a hose reel 18m hose and lance. Model FSSA 650 FSSA 975 Weight Volume 142 IG (645 liters) 214 IG (972 liters) Height 47 (120cm) 63 (160cm) Width 44 (113cm) 44 (113cm) Length 35 (90cm) 35 (90cm) Options Support legs for FTS, Wheels for support legs, Special side jet nozzle - throw distance up to (5m), LED lights, Swivel joint for hose reel, Filling sensor in the tank.

It is ideal for tight spaces, such as underground parking lots.

36 Telescopic Pressure Washer HPWS-1 The HPWS pressure washer is a telescopic design that can be used on sidewalks and expanded to clear a one-lane road. The 20 washer nozzles give excellent cleaning coverage. It is ideal for tight spaces, such as underground parking lots. Model HPWS-1 Price $10,634 Weight 350lbs (158kg) Clearing Width (1.35m m) Overall Width Overall Height Power Requirements 25HP (19kW) Options

37 Spreaders

Drop Sander DS40-1, DS44-1, DS60-1 Mountable on three-point hitch on most tractors. Hydraulically driven, the box is equipped with signal lights. Material flow rates are adjustable.

38 Drop Sander DS40-1, DS44-1, DS60-1 Mountable on three-point hitch on most tractors. Hydraulically driven, the box is equipped with signal lights. Material flow rates are adjustable. Ideal for sanding sidewalks and parking areas in municipalities and institutions. Model DS40-1 DS44-1 DS60-1 Price $4,680 $5,122 $7,020 Weight 350lbs (159kg) 430lbs (195kg) 554lbs (251kg) Capacity Up to 1/3 Cubic Yard Up to 1/2 Cubic Yard Up to 3/4 Cubic Yard Overall Width 40 (102cm) 44 (112cm) 60 (152cm) Overall Height 30.5 (77cm) 36 (92cm) 41 (104cm) Power Requirements 40HP (30kW) Type Hydraulic Driven Lights, Wear plate, Releaer for storage legs CAT 1 or CAT 2 CAT 2 Options Rear LED working lights, Tarp/Cover, Storage legs, Spill protector/enhancer

Model Weight Spread Width Overall Width Overall Height Overall Length Volume Options FWS 200 XL 37 (95cm)

39 Drop Gritter FWS 200 XL The spread amount can be set with the throttle valve on the gritter. Stainless steel cams on the roll shaft. Support legs with wheels and includes flat sealing couplings. Model Weight Spread Width Overall Width Overall Height Overall Length Volume Options FWS 200 XL 37 (95cm) 26 IG (120 liters) Extended side walls, Tarpaulin for extended side walls, Bad Material Kit (sea salt etc.), LED lights.

40 Combi Spreader FWS 200 XL The spread amount can be set with the throttle valve on the gritter, Stainless steel cams on the roll shaft. Support legs with wheels and includes flat sealing couplings. Model Weight Spread Width Overall Width Overall Height Overall Length Volume Options FWS 200 XL 37 (95cm) 32 US G (120 liters) Extended side walls, Tarpaulin for extended side walls, Bad Material Kit (sea salt etc.), LED lights.

Flat Silo Spreader FSS 650, FSS 800 Screw spreading system with integrated Step by Step system (for stirring the material) complete spreading unit made of stainless steel, includes tarpaulin, heavy

Model FSS 650 FSS 800 Weight Capacity (0.65m³) (0.

41 Flat Silo Spreader FSS 650, FSS 800 Screw spreading system with integrated Step by Step system (for stirring the material) complete spreading unit made of stainless steel, includes tarpaulin, heavy load support legs and warning sign WINTER SERVICE, working light for spreader disc. Adjusting the spreading width and amount with hydraulic flow divider on the spread unit. Model FSS 650 FSS 800 Weight Capacity (0.65m³) (0.8m³) Spreading Width ( cm) ( cm) Overall Height Overall Length Options Mounting frame, flat sealing coupling, CAN-BUS remote control, Fill level sensor, Multimatic Control, Multimatic Control Comfort, Electrical asymmetric adjustment of the spread pattern, Pre wetted salt device, GPS, Rear view camera, wheels for support legs, folding ladder with platform, LED lights

42 Sweepers & Brushes

Sweeper HS/MS48-1, HS/MS60-1, HS/MS72-1 An all-season attachment mounted on a three-point hitch, this

With a 32 brush diameter it is useful for clearing sidewalks and paved areas of sand and debris, it is

Model HS/MS48-1 HS/MS60-1 HS/MS72-1 Price $8,970 / $7,878 $9,685 / $8,580 $10,361 / $9,191 Weight 685lbs

Overall Height Power Requirements 40HP (30kW) Swing Angle 30 Type Hydraulic/Mechanical Brush Diameter 32

43 Sweeper HS/MS48-1, HS/MS60-1, HS/MS72-1 An all-season attachment mounted on a three-point hitch, this sweeper can be powered by hydraulics or PTO. With a 32 brush diameter it is useful for clearing sidewalks and paved areas of sand and debris, it is also ideal for fast, efficient removal of light snowfall accumulations. Model HS/MS48-1 HS/MS60-1 HS/MS72-1 Price $8,970 / $7,878 $9,685 / $8,580 $10,361 / $9,191 Weight 685lbs (310kg) 780lbs (353kg) 860lbs (390kg) Clearing Width 48 (122cm) 60 (152cm) 72 (183cm) Overall Width Overall Height Power Requirements 40HP (30kW) Swing Angle 30 Type Hydraulic/Mechanical Brush Diameter 32 (80cm) PU cowling, Parking legs, Poly steel combination, Brushes, adapter plate for wheel kit CAT I or CAT II Options Stainless steel or Steel cowling, Water spray bar, Water pump, Stainless steel wheel kit

Front Sweeper - Light FKM 1210, FKM 1310, FKM 1410, FKM 1510

middle drive through 2 wheel hub motors, light version.

Model FKM 1210 FKM 1310 FKM 1410 FKM 1510 Weight Sweeping

Width Overall Height Power Requirements Swing Angle Type Brush

44 Front Sweeper - Light FKM 1210, FKM 1310, FKM 1410, FKM 1510 Front sweeper with a 22 brush diameter is built with a robust middle drive through 2 wheel hub motors, light version. This brush can be used all seasons. Model FKM 1210 FKM 1310 FKM 1410 FKM 1510 Weight Sweeping Width 47 (120cm) 51 (130cm) 55 (140cm) 59 (150cm) Overall Width Overall Height Power Requirements Swing Angle Type Brush Diameter 22 (55cm) Robust middle drive through 2 wheel hub motors Options Adapter plate 3 point linkage CAT 1

Front Sweeper - Heavy FKM 1300, FKM 1500 Front sweeper with a 22 brush diameter is built with a robust middle drive through 2 wheel hub motors, heavy version. This brush can be used all seasons.

45 Front Sweeper - Heavy FKM 1300, FKM 1500 Front sweeper with a 22 brush diameter is built with a robust middle drive through 2 wheel hub motors, heavy version. This brush can be used all seasons. Model FKM 1300 FKM 1500 Weight Sweeping Width at 30 Angle 45 (115cm) 53 (135cm) Overall Width Overall Height Power Requirements Swing Angle Type Brush Diameter 22 (55cm) Manual fold up of broom cover for snow clearing Options Hydraulic fold up of the broom cover, Water spray bar, Electric water pump

Front Sweeper - Side Driven FFK 1310, FFK 1610 Front sweeper driven

Model FFK 1310 FFK 1610 Weight Sweeping Width at 32 Angle 45

Swing Angle Type Brush Diameter Options Sweeping container with

46 Front Sweeper - Side Driven FFK 1310, FFK 1610 Front sweeper driven from the side. Winter or summer brushes are available. Model FFK 1310 FFK 1610 Weight Sweeping Width at 32 Angle 45 (115cm) 57 (145cm) Overall Width Overall Height Power Requirements Swing Angle Type Brush Diameter Options Sweeping container with side broom, Water spray bar, Electric pump with electrical set and pump holder, broom sets

47 Sweeper - FH / P FH 1100 P, FH 1200 P, FH 1300 P, FH 1400 P Hydraulic sweeper for front lift with 600 mm x 7 poly brushes. Sturdy supporting wheels and hydraulic swing, Oil motor mounted direct in brush roller, gives wide working width compared to outside measures. For use with tractors and tool carriers up to 60 hp. Mounting frame: 3 point or A frame cat. 1-2 Model FH 1100 P FH 1200 P FH 1300 P FH 1400 P Weight 397lbs (180kg) 408lbs (185kg) 430lbs (195kg) 463lbs (210kg) Sweeping Width 43 (110cm) 47 (120cm) 51 (130cm) 55 (140cm) Overall Width 51 (129cm) 55 (139cm) 59 (149cm) 63 (159cm) Overall Height 26 (65cm) Overall Length 28 (70cm) Brush Diameter 600 mm x 7 nylon brushes Options Check valve for free run, Integrated swing valve, Electric reversal kit, Rubber skirt fixed

Street Sweeper - Medium HF 1200 MF, HF 1300 MF, HF 1500 MF, HF 1700 MF, HF 2000 MF Hydraulic operated sweeper, Oil motor mounted direct

3760lbs (235kg) Sweeping Width 44 (113cm) 48 (123cm) 56 (143cm) 64 (163cm) 76 (193cm) Overall Width 55 (139cm) 59 (149cm) 67 (169cm) 74

5HP (12kW) 19HP (14kW) 22HP (16kW) 26HP (19kW) Brush Type Brush diameter Angling - Hydraulic Options Poly standard - optional mix

48 Street Sweeper - Medium HF 1200 MF, HF 1300 MF, HF 1500 MF, HF 1700 MF, HF 2000 MF Hydraulic operated sweeper, Oil motor mounted direct in brush roller gives wide working width compared to the outside measures, large adjustable caster wheels for sweeping pressure, hydraulic angling. Model HF 1200 MF HF 1300 MF HF 1500 MF HF 1700 MF HF 2000 MF Weight 2960lbs (185kg) 3200lbs (200kg) 3360lbs (210kg) 3440lbs (215kg) 3760lbs (235kg) Sweeping Width 44 (113cm) 48 (123cm) 56 (143cm) 64 (163cm) 76 (193cm) Overall Width 55 (139cm) 59 (149cm) 67 (169cm) 74 (189cm) 86 (219cm) Overall Height 31 (80cm) Power Requirements 13.5HP (10kW) 16.5HP (12kW) 19HP (14kW) 22HP (16kW) 26HP (19kW) Brush Type Brush diameter Angling - Hydraulic Options Poly standard - optional mix poly/steel 60cm x 7 with direct draw in the brush roller 21 right/left - 1 swing cylinder 2 pcs 8 x 2.5 rubber wheels with spindle adjustment Sidebrush w/hydraulic lift, Water system 100l incl. accessories, Water kit with nozzle,adjustable flow valve, Elec. reversing for hydraulic sweepers, Adjustable rubber shielding

Street Sweeper - Medium FF/HF 1200 MA, FF/HF 1300 MA, FF/HF 1500 MA, FF/HF 1700 MA Mechanical or hydraulic operated, for tractors from

Heavy storage supporting legs secures the stability.

Sweeping Width 44 (113cm) 48 (123cm) 56 (143cm) 64 (163cm) Overall Width 55 (140cm) 59 (150cm) 67 (170cm) 75 (190cm) Overall Height 30

5HP (12kW) 19HP (14kW) 22HP (16kW) Brush Type Brush diameter Angling - Hydraulic Options Poly standard - optional mix poly/steel 60cm

49 Street Sweeper - Medium FF/HF 1200 MA, FF/HF 1300 MA, FF/HF 1500 MA, FF/HF 1700 MA Mechanical or hydraulic operated, for tractors from 30HP (22kW), 60cm x 7 poly brushes, hydraulic swing, 10 caster wheels, incl. PTO-shaft. Quick mounting/dismounting of the brush roller. Heavy storage supporting legs secures the stability. Model FF/HF 1200 MA FF/HF 1300 MA FF/HF 1500 MA FF/HF 1700 MA Weight 331lbs (150kg) 353lbs (160kg) 397lbs (180kg) 441lbs (200kg) Sweeping Width 44 (113cm) 48 (123cm) 56 (143cm) 64 (163cm) Overall Width 55 (140cm) 59 (150cm) 67 (170cm) 75 (190cm) Overall Height 30 (75cm) Power Requirements 13.5HP (10kW) 16.5HP (12kW) 19HP (14kW) 22HP (16kW) Brush Type Brush diameter Angling - Hydraulic Options Poly standard - optional mix poly/steel 60cm x 7 on floating brush roller mounted in spline axles 20 right/left - 1 swing cylinder 2 pcs 10 x 3 rubber wheels in revolving forks Sidebrush w/hydraulic lift, Water system 100l incl. accessories, Water kit with nozzle,adjustable flow valve, Elec. reversing for hydraulic sweepers, Adjustable rubber shielding

Street Sweeper - Heavy FF/HF 1300 PA, FF/HF 1500 PA, FF/HF 1700 PA, FF/HF 2000 PA, FF/HF 2200 PA Mechanical or hydraulic

Quick mounting/ dismounting of the brush roller. Heavy storage supporting legs secures the stability.

Sweeping Width 48 (123cm) 56 (143cm) 64 (163cm) 76 (193cm) 76 (193cm) Overall Width 59 (150cm) 67 (170cm) 75 (190cm) 76 (193cm)

5HP (12kW) 19HP (14kW) 22HP (16kW) 26HP (19kW) 29HP (21kW) Brush Type Poly standard - optional mix poly/steel Brush diameter

50 Street Sweeper - Heavy FF/HF 1300 PA, FF/HF 1500 PA, FF/HF 1700 PA, FF/HF 2000 PA, FF/HF 2200 PA Mechanical or hydraulic operated, for tractors from 40HP (30kW), 60cm x 7 poly brushes, 2 hydraulic swing cylinders, 10 caster wheels, incl. PTO-shaft. Quick mounting/ dismounting of the brush roller. Heavy storage supporting legs secures the stability. Model 1300 PA 1500 PA 1700 PA 2000 PA 2200 PA Weight 331lbs (150kg) 375lbs (170kg) 419lbs (190kg) 485lbs (220kg) 529lbs (240kg) Sweeping Width 48 (123cm) 56 (143cm) 64 (163cm) 76 (193cm) 76 (193cm) Overall Width 59 (150cm) 67 (170cm) 75 (190cm) 76 (193cm) 84 (213cm) Overall Height 30 (75cm) Power Requirements 16.5HP (12kW) 19HP (14kW) 22HP (16kW) 26HP (19kW) 29HP (21kW) Brush Type Poly standard - optional mix poly/steel Brush diameter (60cm x 7mm) with direct draw in the brush roller Angling - Hydraulic 20 right/left - 2 swing cylinder 2 pcs 10 x 3 rubber wheels in very heavy revolving forks Options Extra heavy duty caster wheels, Forced control wheels, Pendling frame

Street Sweeper - Suction unit FSA - V 500, FSA - V 1000 Vacuum unit with hydraulic operation.

Silent turbine with high airflow, hydraulic operation and high tip emptying.

Model FSA - V 500 FSA - V 1000 Weight Front/Back 220-551lbs (100/250kg) 386-882lbs (175/400kg) Sweeping with 2

Tank (50 l) (100 l) Height 69 (1,75m) 79 (2 m) Sweeping Speed 0.

51 Street Sweeper - Suction unit FSA - V 500, FSA - V 1000 Vacuum unit with hydraulic operation. High volume dirt container, with water atomization in tank and brushes for minimizing of dust. Silent turbine with high airflow, hydraulic operation and high tip emptying. Easy on/off-mounting with heavy duty and adjustable storage stands. Model FSA - V 500 FSA - V 1000 Weight Front/Back lbs (100/250kg) lbs (175/400kg) Sweeping with 2 or 3 brushes Width (1,3-1,75m) (1,8-2,75m) Air Volume (1100 liters/sec) (1700 liters/sec) Water Tank (50 l) (100 l) Height 69 (1,75m) 79 (2 m) Sweeping Speed miles/hour(1-3 km/hour) or according to conditions Water Consumption 45 liters/hour at 2 bar Brush rotation speed rpm - continuously adjustable Options Additional 3rd side brush including hydraulic lift, additional external suction hose 6m including hose parking

Sweeper - FH / P FH 1500 P, FH 1600 P, FH 1800 P, FH 2000 P Hydraulic sweeper for front lift

Sturdy supporting wheels and hydraulic swing, Oil motor mounted direct in brush roller, gives

For use with tractors and tool carriers up to 60 hp. Mounting frame: 3 point or A frame cat.

650lbs (295kg) Sweeping Width 59 (150cm) 63 (160cm) 71 (180cm) 79 (200cm) Overall Width 51

52 Sweeper - FH / P FH 1500 P, FH 1600 P, FH 1800 P, FH 2000 P Hydraulic sweeper for front lift with 600 mm x 7 poly brushes. Sturdy supporting wheels and hydraulic swing, Oil motor mounted direct in brush roller, gives wide working width compared to outside measures. For use with tractors and tool carriers up to 60 hp. Mounting frame: 3 point or A frame cat. 1-2 FH 1500 P FH 1600 P FH 1800 P FH 2000 P Weight 485lbs (220kg) 518lbs (235kg) 584lbs (265kg) 650lbs (295kg) Sweeping Width 59 (150cm) 63 (160cm) 71 (180cm) 79 (200cm) Overall Width 51 (129cm) 55 (139cm) 59 (149cm) 63 (159cm) Overall Height 26 (65cm) Overall Length 28 (70cm) Brush Diameter 600 mm x 7 nylon brushes Options Check valve for free run, Integrated swing valve, Electric reversal kit, Rubber skirt fixed

1 x crossover valve supplied as standard delivery Requires 1 x hydraulic output for operating and 2 x dual connections for steering.

53 Environment SweePers UK 425 R/L, UK 475 R/L, UK 725 R/L Hydraulic weed brush for use with compact tractors, loaders and tool carriers. Hydraulic tilt of brush head and side shift operates on left or right. Fitted with Parker engine with integrated shock suppression valve, and reversible. 1 x crossover valve supplied as standard delivery Requires 1 x hydraulic output for operating and 2 x dual connections for steering. Model UK 425 R/L UK 475 R/L UK 725 R/L Weight (185kg) (215kg) (315kg) Sweeping Width 43 (110cm) 83 (210cm) Width Folded 39 (100cm) 63 (160cm) Overall Height 35 (90cm) Power Requirements 22HP (16kW) 26HP (19kW) 29HP (21kW) Brush diameter 17 (42.5cm) 29 (72.5cm) 29 (72.5cm) No. of Brushes/Tufts 40 pcs 80 pcs 80 pcs Options

Brush Plate Spline mounted Brush Brush Adjustment Number of Brushes Angling 65 Right/Left Hydraulic

54 Environment SweePers UK 600 MDS, UK 600 HDS Model UK 600 MDS Mechanical Operation UK 600 HDS Hydraulic Operation Weight 441lbs (200kg) 441lbs (200kg) Brush Head 26 (65cm) w/2 32 steel brushes Brush Plate Spline mounted Brush Brush Adjustment Number of Brushes Angling 65 Right/Left Hydraulic 32 pcs Hydraulic Security Equipment Rubber Shield Overflow Valve & Rubber Shield Wheels Removable 10 Options

55 Mowers

(158cm) 74 (188cm) 85 (215cm) Overall Height 22 (56cm) 22 (57cm) 24 (60cm) Cutting Height 1-4 (2-9cm) Power Requirements 21HP (15kW) 24.

56 Rotary Mower - Heavy FM/FH 1500 P, FM/FH 1800 P, FM/FH 2100 P Front mounted mechanical operated including PTO shaft. Model FM/FH 1500 P FM/FH 1800 P FM/FH 2100 P Weight 551lbs (250kg) 650lbs (295kg) 750lbs (340kg) Cutting Width 62 (158cm) 74 (188cm) 85 (215cm) Overall Width 62 (158cm) 74 (188cm) 85 (215cm) Overall Height 22 (56cm) 22 (57cm) 24 (60cm) Cutting Height 1-4 (2-9cm) Power Requirements 21HP (15kW) 24.5HP (18kW) 30HP (22kW) Height Adjustment Continuous Variable Number of Rotors 3 pcs Number of Knives 6 pcs Tires 4 pcs 12 x 4 A-frame or 3-point mounting frame Options Double multi knife, Hydraulic side shift, Foam filled puncture resistant wheels

Rotary Mower - Light TM/TH 1500, TM/TH 1800 Front mounting / Mechanical

Model TM/TH 1500 TM/TH 1800 Weight 518lbs (235kg) 551lbs (250kg)

Overall Height Cutting Height 20 (50cm) 1-3 (2-8cm) Power Requirements

Knives Mechanical 3 pcs 3 pcs Tires 4 pcs 10 x 3 Options Mulching kit,

57 Rotary Mower - Light TM/TH 1500, TM/TH 1800 Front mounting / Mechanical or hydraulic operation. With wide rear discharge. Model TM/TH 1500 TM/TH 1800 Weight 518lbs (235kg) 551lbs (250kg) Cutting Width 62 (158cm) 74 (188cm) Overall Width 62 (158cm) 74 (188cm) Overall Height Cutting Height 20 (50cm) 1-3 (2-8cm) Power Requirements 19HP (14kW) 21HP (15kW) Height Adjustment Number of Rotors Number of Knives Mechanical 3 pcs 3 pcs Tires 4 pcs 10 x 3 Options Mulching kit, Chain guard, Rubber guard, Anti scalp 3 pcs., Hydraulic tilt-up, Foam filled puncture resistant wheels

Rotary Mower - Light FR FR 1500 LM/LH, FR 1800 LM/LH With hydraulic height

Model FR 1500 LM/LH FR 1800 LM/LH Weight 584lbs (265kg) 628lbs (285kg) Cutting

28 (70cm) Cutting Height 1-3 (2-8cm) Power Requirements 19HP (14kW) 21HP (15kW)

4 pcs 10 x 3 Hydraulic tilt-up, Mounting frame: A-frame or 3-point Options

58 Rotary Mower - Light FR FR 1500 LM/LH, FR 1800 LM/LH With hydraulic height adjustment and hydraulic tilt-up for easy cleaning and change of knives. Model FR 1500 LM/LH FR 1800 LM/LH Weight 584lbs (265kg) 628lbs (285kg) Cutting Width 60 (153cm) 70 (178cm) Overall Width 66 (167cm) 76 (193cm) Overall Height 28 (70cm) Cutting Height 1-3 (2-8cm) Power Requirements 19HP (14kW) 21HP (15kW) Height Adjustment Hydraulic Number of Rotors 3 pcs Number of Knives 3 pcs Tires 4 pcs 10 x 3 Hydraulic tilt-up, Mounting frame: A-frame or 3-point Options Mulching kit, Chain guard, Rubber guard, Anti scalp disc 3 pcs., Foam filled puncture resistant wheels

Rotary Mower - Side Discharge HC/HCH 1500 A, HC/HCH 1800 A Front mounted with side

Includes PTO shaft or hoses and couplings.

Width (cm) (cm) Overall Width 67 (170cm) 76 (193cm) Overall Height 31 (80cm)

Adjustment Hydraulic or Mechanical Number of Rotors 3 pcs Number of Knives 3 pcs

59 Rotary Mower - Side Discharge HC/HCH 1500 A, HC/HCH 1800 A Front mounted with side discharge to the right. With fixed knives, 4 large caster wheels. Includes PTO shaft or hoses and couplings. Model HC/HCH 1500 A HC/HCH 1800 A Weight 529lbs (240kg) 606lbs (275kg) Cutting Width (cm) (cm) Overall Width 67 (170cm) 76 (193cm) Overall Height 31 (80cm) Cutting Height 1-3 (2-8cm) Power Requirements 21HP (15kW) 27HP (20kW) Height Adjustment Hydraulic or Mechanical Number of Rotors 3 pcs Number of Knives 3 pcs Tires 4 pcs 10 x 3 Mounting frame: A-frame or 3-point Options Mulching kit, Anti scalp disc 3 pcs., Puncture resistant wheels with armor plating support

60 Grass Collecting Container SC 1200, SC 2000 Container for mounting on Tool carriers for excellent grass and leaf collection. High suctions capacity, low noise level and vibration damp suction turbine with replacement wearing plates in turbine house. Stable frame construction and high tip and large tip angel. The container is sandblast, coasted and powder coated for anti-corrosive protection. The grass collecting container is supplied with all necessary equipment, ready to install and with support legs for storage. Image coming soon Model SC 1200 SC 2000 Weight 838lbs (380kg) 1058lbs (480kg) Maximum Load (1200l) (2000l) Overall Width 49 (125cm) 51 (130cm) Overall Height 47 (120cm) Dumping Height 787 (2m) Power Requirements 16.5HP (22kW) Minimum Oil Requirements (40-60l) Pressure 200 bar 2 piece hydraulic cylinder for high tip dumping, parking rack Options 4m tube with grib and nozzle, Bracket for hand suction tube, Noise reduction

Rotary Mower - Triplex TH/THM 2500, TH/THM 3000 3-divided rotary mower, fully hydraulic or mechanical/hydraulic operated.

Hydraulic tilt-up for easy maintenance and cleaning.

Overall Height 20 (50cm) Cutting Height 1-3 (2-8cm) Power Requirements 34HP (25kW) 42HP (31kW) Height Adjustment Hydraulic or Mechanical Number

61 Rotary Mower - Triplex TH/THM 2500, TH/THM divided rotary mower, fully hydraulic or mechanical/hydraulic operated. With heavy duty caster wheels, fixed knives, hydraulic lift of side mowers, with automatic stop of knives when lifted more than 30. Hydraulic tilt-up for easy maintenance and cleaning. Model TH/THM 2500 TH/THM 3000 Weight 805lbs (365kg) 970lbs (440kg) Cutting Width 98 (248cm) 114 (290cm) Overall Width 100 (253cm) 117 (298cm) Overall Height 20 (50cm) Cutting Height 1-3 (2-8cm) Power Requirements 34HP (25kW) 42HP (31kW) Height Adjustment Hydraulic or Mechanical Number of Rotors 5 pcs Number of Knives 5 pcs Tires 6 pcs 10 x 3 Mounting frame: A-frame or 3-point Options Hydraulic Tilt-Up, Mulching kit, Chain guard, Rubber guard, Anti scalp disc, Flotation mounting frame, Foam filled puncture resistant wheels, Wide wheels included wheel fork

62 Rotary Mower - Triplex TH 2500 C, TH 3000 C 3-divided rotary mower, fully hydraulic operated. With hydraulic cutting height adjustment, heavy duty caster wheels, fixed knives, hydraulic lift of side mowers, with automatic stop of knives when lifted more than 30. Hydraulic Tilt-Up for easy maintenance and cleaning. Model TH 2500 C TH 3000 C Weight 970lbs (440kg) 1058lbs (480kg) Cutting Width 98 (248cm) 114 (290cm) Overall Width 100 (253cm) 117 (298cm) Overall Height 20 (50cm) Cutting Height 1-3 (2-8cm) Power Requirements 34HP (25kW) 42HP (31kW) Height Adjustment Hydraulic Number of Rotors 5 pcs Number of Knives 5 pcs Tires 6 pcs 10 x 3 Mounting frame: A-frame or 3-point Options Hydraulic Tilt-Up, Mulching kit, Chain guard, Rubber guard, Anti scalp disc, Flotation mounting frame, Foam filled puncture resistant wheels, Wide wheels included wheel fork

Flail Mower - Easy SK 1300 MM/MH, SK 1500 MM/MH, SK 1700 MM/MH Hydraulic drive, Front mounting, Heavy-duty rotary axle, Strong suction, Supporting leg, Stable at 2500rpm, Stable knives, Rubber skirt

63 Flail Mower - Easy SK 1300 MM/MH, SK 1500 MM/MH, SK 1700 MM/MH Hydraulic drive, Front mounting, Heavy-duty rotary axle, Strong suction, Supporting leg, Stable at 2500rpm, Stable knives, Rubber skirt to prevent stone ejection. Model SK 1300 MM/MH SK 1500 MM/MH SK 1700 MM/MH Weight 739lbs (335kg) 827lbs (375kg) 915lbs (415kg) Cutting Width 51 (130cm) 59 (150cm) 67 (170cm) Overall Width 62 (158cm) 70 (178cm) 78 (198cm) Overall Height 35 (88cm) Cutting Height 1-4 (2-9cm) Power Requirements 16HP (12kW) 19HP (14kW) 21HP (15kW) Height Adjustment (15-75mm) Number of Y Flails 84 sets 96 sets 108 sets Number of J Fails 42 sets 48 sets 54 sets Options Hydraulic side shift, Rear roller with hydraulic height adjustment

Flail Mower - Heavy SK 1500 PM/PH, SK 2000 PM/PH Hydraulic drive, Front mounting, Heavy-duty rotary axle, Strong suction, Supporting leg, Stable at 2500rpm, Stable knives, Rubber skirt

Model SK 1500 PM/PH SK 2000 PM/PH Weight 1213lbs (550kg) 1543lbs (700kg) Cutting Width 44 (113cm) 48 (123cm) Overall Width 72 (184cm) 92 (234cm) Overall Height 35 (90cm) Cutting Height

64 Flail Mower - Heavy SK 1500 PM/PH, SK 2000 PM/PH Hydraulic drive, Front mounting, Heavy-duty rotary axle, Strong suction, Supporting leg, Stable at 2500rpm, Stable knives, Rubber skirt to prevent stone ejection. Model SK 1500 PM/PH SK 2000 PM/PH Weight 1213lbs (550kg) 1543lbs (700kg) Cutting Width 44 (113cm) 48 (123cm) Overall Width 72 (184cm) 92 (234cm) Overall Height 35 (90cm) Cutting Height (15-75mm) Power Requirements 20HP (15kW) 30HP (22kW) Height Adjustment Hydraulic or Mechanical Number of J Fails 42 stk. 56 stk. Number of Hammer Fails x Options Hydraulic Tilt-Up, Mulching kit, Chain guard, Rubber guard, Anti scalp disc, Flotation mounting frame, Foam filled puncture resistant wheels, Wide wheels included wheel fork

Reel Mower with Ransomes 3 RD Ran, 5 RD Ran, 5+2 RD Ran Hydraulic reel mower with hydraulic lift of cutter unit include safety valves for disconnection of oil stream when cutting unit is lifted.

Model 3 RD Ran 5 RD Ran 5+2 RD Ran Weight 992lbs (450kg) 1653lbs (750kg) 2205lbs (1000kg) Cutting Width Overall Width Overall Height 35 (88cm) Cutting Height 1-3 (25-80mm) Power Requirements 16HP

65 Reel Mower with Ransomes 3 RD Ran, 5 RD Ran, 5+2 RD Ran Hydraulic reel mower with hydraulic lift of cutter unit include safety valves for disconnection of oil stream when cutting unit is lifted. With back lapping equipment to turn the oil stream for edging of knives. Fixed lifted main frame and mechanical safety lock of cutting units during transport. Model 3 RD Ran 5 RD Ran 5+2 RD Ran Weight 992lbs (450kg) 1653lbs (750kg) 2205lbs (1000kg) Cutting Width Overall Width Overall Height 35 (88cm) Cutting Height 1-3 (25-80mm) Power Requirements 16HP (12kW) 19HP (14kW) 21HP (15kW) Height Adjustment Hydraulic Oil Requirements 25 liters at 200 bar 50 liters at 200 bar 90 liters at 250 bar Number of J Fails 42 sets 48 sets 54 sets Options 25cm Magna unit 6 or 8 blades, 21cm Sports Cutter 6 or 8 blades

PRODUCT CATALOGUE 2018

PRODUCT CATALOGUE 2018 METEC Metal Technology Inc. is highly client-centred, taking pride in responding to customer challenges with long-term solutions. Open communication with customers is key: probing