power & infrastructure solutions power and infrastructure brochure

Transcription

1 Precast Concrete Solutions. power & infrastructure solutions power and infrastructure brochure v.1.0

2 FP McCann is the UK s market leader in the manufacture, supply and delivery of precast concrete solutions. Our comprehensive precast concrete business extends to include: Drainage and Water Management Tunnel and Shaft Solutions Rail Power and Infrastructure Solutions Walling Solutions Fencing Solutions Rooms and Building Solutions Agricultural Solutions Flooring Solutions Bespoke specialist precast product service Modern manufacturing plants at Alnwick (Northumberland), Cadeby (Warwickshire), Ellistown (Leicestershire), Grantham (Lincolnshire), Knockloughrim (Northern Ireland), Littleport (Cambridgeshire), Lydney (Gloucestershire), Telford (Shropshire) and Weston Underwood (Derbyshire) incorporate the latest computerised batching, distribution, casting, curing and handling systems and are operated by skilled and experienced workforces to ensure consistency of quality. Their geographical spread gives us an unrivalled ability to serve the construction industry throughout the UK and Ireland. fpmccann.co.uk

3 introduction power & infrastructure Sales & technical enquiries fpmccann.co.uk/power-infrastructure FP McCann offers a specialist range of precast reinforced concrete cable troughs and ducting systems used to house and protect most types of services, including power and communication cables and pipes for gas, water and chemicals. Easi-Duct access troughs and ducts can be buried underground, located above, or flush with surface levels to provide protection against accidental or malicious damage and to offer easy access for maintenance and repair. Three types of flush fitting lids are supplied in either reinforced precast concrete, GRP composite, or steel tray. All are designed and tested for loading group class to BS EN 124. Typical Easi-Duct applications include; rail and highway infrastructure; power stations; gas, oil and chemical installations; industrial, commercial and domestic developments; docks and harbours; water and sewage treatment plants. FP McCann is an Achilles Utility Vendor Database (UVDB) approved supplier, Supplier No , and have opted for a Verify Category D audit. Benefits Compared with the alternatives of direct burying of cables and pipes or overhead suspension, Easi-Duct has a number of advantages: Applicable to power and telecom cables in addition to pipes for liquids and gases Chemically resistant concrete Services buried at depth are unexposed to weather changes (i.e. freezing or overheating) High strength load bearing units Easy access for cable repair, jointing or new cable additions Whole life costing of precast concrete is lower than other forms of ducting construction Non conductive to electricity FP McCann can produce specialist units moulded to requirement Design Features The troughs, ducts and lids are designed and tested for load classes A15, B125, C250 and D400. For loadings E600 and F900, Easi- Duct systems are designed, tested and manufactured specific to order. 03

4 power/infrastructure cable ducting segments Quality Easi-Duct systems are designed, manufactured and strength tested to comply with loading criteria as set out in accordance with BS EN 1433 (Troughs) and BS EN 124 (Lids). All operations are conducted in accordance with FP McCann s quality management system, BSI accredited to BS EN ISO Trough Table 1: to 1250 Width Reference (width x depth x length) 1250 x 1250 x 1250 x x Trough Coding MT ABCD MT ABCD MT 1250 ABCD MT 1250 ABCD Description 1250W x 1250D x L 1250W x 1250D x L Trough 1250W x D x L 1250W x D x L Trough s/w* nominal kg Supplied with Lid reference Trough Dimensions (mm) A B C D E F 1915 ML TH CD ML RC AB or ML 1250 ST CD ML TH CD ML RC AB or ML 1250 ST CD x 750 x MT ABCD MT ABCD 1250W x 750D x L 1250W x 750D x L Trough 1484 ML TH CD ML RC AB or ML 1250 ST CD x x x 750 x MT ABCD MT ABCD MT 750 ABCD MT 750 ABCD W x D x L Trough W x D x L Trough W x 750D x L W x 750D x L Trough ML 50 ODT A or ML 50 CDS A or ML TH CD ML 100 RC AB or ML100 ST CD ML 50 ODT A or ML 50 CDS A or ML TH CD ML 100 RC AB or ML100 ST CD x 500 x MT 500 ABCD MT 500 ABCD W x 500D x L W x 500D x L Trough ML 50 ODT A or ML 50 CDS A or ML TH CD ML 100 RC AB or ML100 ST CD * maximum self weight = nominal self + 5%, which should be used to size lifting equipment 04

5 power & infrastructure Sales & technical enquiries fpmccann.co.uk/power-infrastructure Trough Table 2: 350 to 750 Width Reference (width x depth x length) Coding Description Loading group Class to BS EN 124 s/w * nominal kg Supplied with Lid reference Trough Dimensions (mm) A B C D E F 750 x 750 x MT ABCD MT ABCD 750W x 750D x L 750W x 750D x L A,B,C &D 1115 A,B,C &D 1115 ML ODT A or ML CDS A or ML TH CD ML RC AB or ML ST CD x 500 x MT ABCD MT ABCD 750W x 500D x L 750W x 500D x L Trough A,B,C &D 923 A,B,C &D 923 ML ODT A or ML CDS A or ML TH CD ML RC AB or ML ST CD x 600 x MT ABCD MT ABCD 600W x 600D x L 600W x 600D x L Trough A,B,C &D 810 A,B,C &D 810 ML ODT A or ML CDS A or ML CDS B ML RC AB or ML 600 ST CD x 300 x MT ABCD MT ABCD 600W x 300D x L 600W x 300D x L Trough A,B,C &D 596 A,B,C &D 596 ML ODT A or ML CDS A or ML CDS B ML RC AB or ML 600 ST CD x 450 x MT ABCD MT ABCD 450W x 450D x L 450W x 450D x L Trough A,B,C &D 596 A,B,C &D 596 ML ODT A or ML CDS A or ML CDS B ML RC AB or ML 600 ST CD x 300 x MT ABCD MT ABCD 350W x 300D x L 350W x 300D x L Trough A,B,C &D 450 A,B,C &D 450 ML ODT A or ML CDS A or ML CDS B ML RC AB or ML ST CD * maximum self weight = nominal self + 5%, which should be used to size lifting equipment 05

6 power/infrastructure cable ducting segments Lid Table 1: All sizes Reference (width x depth x length) (width = span width) 1250 x 150 x x 150 x x 225 x 500 x 50 x x 50 x x 100 x 500 x 100 x 500 x 225 x x 50 x 750 x 50 x 750 x 100 x x 100 x x 225 x x 50 x 600 x 50 x 600 x 50 x x 100 x x 100 x x 50 x 450 x 50 x 450 x 50 x 475 Reference (width x depth x length) (width = span width) T Concrete Lid Lid Coding ML RC AB T ML Recessed Steel ST CD Tray Lid T RC Top Hat Lid GRP Open GRP Closed 5T Concrete Lid ML TH CD ML 50 ODT A ML 50 CDS A ML 100 RC AB 11.5T ML 100 Recessed Steel ST CD Tray Lid 11.5T RC Top Hat Lid 750 GRP Open 750 GRP Closed 750 5T Concrete Lid T Recessed Steel Tray Lid T RC Top Hat Lid 600 GRP Open 600 GRP Closed 600 GRP Closed 5T Lid 600 5T Concrete Lid T Recessed Steel Tray Lid 450 GRP Open 450 GRP Closed 450 GRP Closed 5T Lid 450 5T 450 x 100 x 500 Concrete Lid T 450 x 100 x 500 Recessed Steel Tray Lid 350 x 50 x 350 x 50 x 350 x 50 x x 100 x x 100 x GRP Open 350 GRP Closed 350 GRP Closed 5T Lid 350 5T Concrete Lid T Recessed Steel Tray Lid ML 225 TH CD ML ODT A ML CDS A ML RC AB ML ST CD ML TH CD ML ODT A ML CDS A ML CDS B ML RC AB ML ST CD ML ODT A ML CDS A ML CDS B ML RC AB ML ST CD ML ODT A ML CDS A ML CDS B ML RC AB ML ST CD Description Reinforced concrete recessed Lid to fit 1250 wide trough with 150 deep rebate 5T SWL Composite (steel tray + concrete infill) Lid to fit 1250 wide trough with 150 deep rebate 11.5T SWL Reinforced concrete top hat Lid to fit 1250 wide trough 11.5T SWL Open GRP Dura Tread Lid to fit wide trough with 50 Closed GRP Dura Slab Lid to fit wide trough with 50 Reinforced concrete recessed Lid to fit wide trough with 100 deep rebate 5T SWL Composite (steel tray + concrete infill) Lid to fit wide trough with 100 deep rebate 11.5T SWL Reinforced concrete top hat Lid to fit wide trough 11.5T SWL Open GRP Dura Tread Lid to fit 750 wide trough with 50 Closed GRP Dura Slab Lid to fit 750 wide trough with 50 Reinforced concrete recessed Lid to fit 750 wide trough with 100 deep rebate 5T SWL Composite (steel tray + concrete infill) Lid to fit 750 wide trough with 100 deep rebate 11.5T SWL Reinforced concrete top hat Lid to fit 750 wide trough 11.5T SWL Open GRP Dura Tread Lid to fit 600 wide trough with 50 Closed GRP Dura Slab Lid to fit 600 wide trough with 50 Closed GRP Dura Slab Lid to fit 600 wide trough with 50 deep rebate 5T SWL Reinforced concrete recessed Lid to fit 600 wide trough with 100 deep rebate 5T SWL Composite (steel tray + concrete infill) Lid to fit 600 wide trough with 100 deep rebate 11.5T SWL Open GRP Lid to fit 450 wide trough with 50 deep rebate 1.5T SWL Closed GRP Lid to fit 450 wide trough with 50 deep rebate 1.5T SWL Closed GRP Lid to fit 450 wide trough with 50 deep rebate 5T SWL Reinforced concrete recessed Lid to fit 450 wide trough with 100 deep rebate 5T SWL Composite (steel tray + concrete infill) Lid to fit 450 wide trough with 100 deep rebate 11.5T SWL Open GRP Dura Tread Lid to fit 350 wide trough with 50 Closed GRP Dura Slab Lid to fit 350 wide trough with 50 Closed GRP Dura Slab Lid to fit 350 wide trough with 50 deep rebate 5T SWL Reinforced concrete recessed Lid to fit 350 wide trough with 100 deep rebate 5T SWL Composite (steel tray + concrete infill) Lid to fit 350 wide trough with 100 deep rebate 11.5T SWL Loading group Class to BS EN 124 s/w* nominal kg Average width (inc bearing width) Volume reinf per lid kg Lid Dimensions (mm) A B C A and B C and D ** 1479** 150** C and D A A A and B C and D ** 1204** 100** C and D A A A and B C and D ** 929** 100** C and D A A B A and B ** 724** 100** C and D A A B A and B ** C and D ** A A B A and B ** 484** 100** C and D * maximum self weight = nominal self + 5%, which should be used to size lifting equipment ** Please note, these figures are currently under review, please refer to the website for updated information.

7 corner and tee units power & infrastructure Sales & technical enquiries fpmccann.co.uk/power-infrastructure Corner and Tee Troughs are available ex-stock for units up to 600mm. Other sizes are available to order. Angled units are also available. Please contact FP McCann to discuss availability. For dimensions and technical specification refer to our website. 07

8 BT approved comms boxes A unique cable and junction protection box offering easy access for maintenance. This reinforced concrete unit can be installed in minutes with the one piece construction design preventing ground water leakage and associated assembly requirements. Comms Boxes are mainly used in infrastructure works to include airports, railway projects, roads and housing developments. Features Reinforced walls Preformed cable entry points Reduced carbon footprint Easily manoeuvred with lifting eyes Ironmongery fitted Comms J4 Dimensions Length Width Height Internal Dimensions 900mm 430mm 800mm Weight *(Nominal) 615kgs Comms C2 08 Dimensions Length Width Height Internal Dimensions 1200mm 600mm 895mm Weight *(Nominal) 1400kgs *Maximum self weight = Nominal + 5%, which should be used to size lifting equipment. Note: BT NI Approved

9 power & infrastructure Sales & technical enquiries fpmccann.co.uk/power-infrastructure Comms DP Dimensions Length Width Height Internal Dimensions 910mm 890mm mm Weight *(Nominal) 1565kgs Comms MCX Dimensions Length Width Height Weight *(Nominal) Chamber 1300mm 850mm 900mm 2160kgs Riser 1300mm 850mm 300mm 470kgs Concrete Cover Slab 1570mm 1120mm 150mm 660kgs 09

10 1400 l x 700 w x 700 h (1.7 tonne) 700 l x 700 w x 700 h (0.85 tonne) Easi-Bloc is a precast concrete block, offering solutions where limited space is available for containment. Blocs are simplistic in design allowing for effortless handling and speed of installation. Easi-Bloc comes in two sizes making them ideal for a variety of applications. Applications Ideal for a variety of uses to include: Segregation Temporary road blocks Security barricades Storage bays Agricultural bays suitable for grain, silage etc Earth Retention Aggregate bays Partition walling Landscaping Waterways Highways Shoreline Defences Features Cost effective Easy to handle and install Durable Easi-Bloc contains a central cast in lifting loop for ease of handling and installation. Products are manufactured to comply with the requirements of BS EN :2004. Length (mm) Width (mm) Height (mm) Weight (t)

11 Easi-Bloc 11

12 Cadeby Works: Brascote Lane Cadeby Nuneaton Warwickshire CV13 0BB Tel fpmccann.co.uk