. The economical solution to protecting underground services.

Size: px

Start display at page:

Download ". The economical solution to protecting underground services."

Earl Boyd
6 years ago
Views:

1 I/f 52.9 ept 2015 Xh. The economical solution to protecting underground services. n alternative access system from Gatic.

Product Features and enefits Gatic OEX is a comprehensive system of single, duct and multi span access covers and frames for use in slow moving traffic situations, where chequer plate, deep steel

2 Product Features and enefits Gatic OEX is a comprehensive system of single, duct and multi span access covers and frames for use in slow moving traffic situations, where chequer plate, deep steel recessed or concrete slabs might otherwise be installed and a sealing facility is not required. OEX offers the versatility of a galvanised steel frame combined with the rigidity and durability of ductile iron covers. This enables shallower covers to be used which are therefore lighter than deep steel or concrete slabs. Thus offering a competitively priced longterm solution to protecting cables, pipes and underground equipment. over types overs are recessed for concrete infill or solid top according to specifier preference. oncrete infill recessed covers Recessed covers are designed for filling with concrete as specified in EN N/mm2 for a test cube of 150mm, or a 40N/mm2 for a test cylinder 150mm diameter x 300mm high, using a 10mm coarse aggregate. nti-slip surface covers oncrete infill covers provide a non-slip surface similar to the surrounding areas. olid top covers incorporate a raised lozenge pattern on the surface. Materials The components of OEX covers are manufactured from the following materials: uctile iron components to EN 1563:2011 ide frames and structural steel sections (removable beams) to 4-1:2005 Non-rocking orrectly installed, OEX covers will be non-rocking under slow moving traffic. Easy removal/replacement The machined underside seating face of OEX covers allows the sliding out of covers for easy removal or replacement. Operator control Jack screw operating keys locate positively and securely into OEX covers and are a necessary tool if the inherent cover seal is to be broken effectively and to allow operator maximum control during operation. ecure and vandal resistant overs are designed to prevent tampering and unauthorised removal. Ventilation Ventilation can be provided by fitting four 25mm diameter ventilation tubes in recessed covers. losed keyways OEX cover keyways are closed and fitted with plastic plugs to prevent the ingress of dirt. oadings ll OEX covers will withstand test load and maximum permanent set criteria specified in EN 124: 1994 for each loading category. ecure support The clear opening width between supporting frames are at least 7mm greater than the pit/chamber design to allow for minor deviations in pit construction dimensions. eam wallbox upporting beams in OEX Multispan units are easily removed with appropriate lifting equipment for access to the total chamber area. eam wallboxes do not project into the chamber opening. Finishes overs are coated with a black bituminous solution that acts as a temporary protection during transit, Removable supporting steelwork and side frames are galvanised to EN IO 1461:2009. Installation onsignments of OEX units are accompanied by comprehensive installation instructions. Environmental commitment Responsibility towards the environment is our primary concern. Our customers often now demand products that are made from recycled and recyclable materials, supplied by companies with robust environmental policies to reduce the environmental impact of their projects for future generations. To meet these requirements we have an integrated Quality ( EN IO 9001:2008) and Environmental ( EN IO 14001:2004) Management ystem which encompasses the design, manufacture and management systems within the company and ensures our commitment to continuous environmental improvements regarding the manufacture and design of all our products in the following ways: n Minimise environmental impact n ommit organisational resources to energy management n Reduce energy costs n Give high priority to energy efficient investments n onsider life cycle energy costs for all new projects n Minimise 0 2 emissions year on year n Use energy from sustainable resources wherever possible To achieve these goals we have put in place the necessary systems and controls to meet demanding environmental targets and to make sure that these are maintained for the future benefit of the environment and QUITY our customers alike. Gatic services Gatic offers a full support service to specifiers and contractors, including omputer ided esign. uto compatible details of all Gatic products are available. Please consult our technical department for assistance. In view of our commitment to product improvement, we reserve the right to alter designs without notice. esign changes will not adversely affect the performance or loading capability of our products. URNE The Gatic Quality Management ystem has been approved to EN IO 9001:2008 ertificate No. FM ENVIRONMENT URNE The Gatic Environmental Management ystem has been approved to IO 14001:2004 ertificate No. EM n alternative access system from Gatic.

oading Group 250 FOR RO RRYING RETIVEY OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET oading Group 250 OEX Medium uty ingle overs and Frames uitable for 5 tonne slow moving

over test load - 250kN sizes x over type 750 x 300 F 600 x 450 F 750 x 450 MR 600 x 600 F 750 x 600 F 900 x 600 F 750 x 750 F 900 x 750 F 900 x 900 F 600 x 1050 M 750 x 1050 M 1000 x 1050 M 600 x

3 oading Group 250 FOR RO RRYING RETIVEY OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET oading Group 250 OEX Medium uty ingle overs and Frames uitable for 5 tonne slow moving pneumatic wheel load. over test load - 250kN sizes x over type 750 x 300 F 600 x 450 F 750 x 450 MR 600 x 600 F 750 x 600 F 900 x 600 F 750 x 750 F 900 x 750 F 900 x 900 F 600 x 1050 M 750 x 1050 M 1000 x 1050 M 600 x 1200 M 750 x 1200 M Type F Recessed Top overs Recessed Top over Type F or M olid Top over Type or M Type olid Top overs sizes x over type 600 x x x x x x x 1200 M 750 x 1200 M 1000 x 1000 M uct & Trench overs and Frames uitable for 5 tonne slow moving pneumatic wheel load. over test load - 250kN Recessed Top overs over type 300 F 450 F 600 F 750 F 900 F 1050 M 1200 M 1500 M/F Recessed overs Recessed covers can be supplied to cover ducts or trenches as straight runs or as complex layouts. olid Top overs over type olid top covers are usually supplied in straight runs. Recessed Top overs Type F / M or M/F tandard length olid Top overs over type M olid Top overs Type or M F * * 2 * * * * * 3 * * * 450 F 2 * * * * 3 * * * * 4 * 600 F F F M * * * 4 * 1200 M * * * 4 * 1500 M/F * * * 4 * over type tandard length M * * * 4 * OVER N FRME 250 FOR RO RRYING OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET *Indicates standard sizes not available - The number shown indicates the quantity of cover parts - Other standard sizes may be available, refer to our technical department. Type M Type M 4 5

4 oading Group 250 FOR RO RRYING OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET oading Group 250 OEX Medium uty uitable for 5 tonne slow moving pneumatic wheel load. over test load - 250kN pecification elow is sample specification information and notes for Multispan recessed or olid Top covers and frames. oading group Gatic tonne wheel load test load 250 kn. Materials overs: uctile iron components to EN 1563:2011. tructural steel removable beams to 4-1:2005. Frame bars to 4-1:2005. Finishes overs coated with black bituminous solution for protection during transit. Removable supporting steelwork and side frames galvanised to EN IO 1461:2009. Infill and surround concrete by customer oncrete strength, using 10mm coarse aggregate, to be: 45N/mm2 for a test cube of 150mm or 40N/mm2 for a test cylinder of 150mm diameter x 300mm high. Installation In accordance with instructions supplied by Gatic. To specify use size and description format as follows: OEX Multispan Recessed covers and frames over type F recessed Multiple access covers recessed for concrete infill with removable beams.... in no.... (length) x... (span) mm pit clear opening multi span cover and frame. OEX Type F uctile Iron Recessed over in... parts complete with... in no.... x... mm galvanised removable support beam spanning the... (length) mm way. uitable for oading Group 250 Medium uty 5 Tonnes Wheel oad (pneumatic tyre). OEX Multispan olid Top covers and frames over type solid top Multiple solid top access covers with removable beams.... in no.... (length) x... (span) mm pit clear opening multi span cover and frame. OEX Type uctile Iron olid Top over in... parts complete with... in no.... x... mm galvanised removable support beam spanning the... (length) mm way. uitable for oading Group 250 Medium uty 5 Tonnes Wheel oad (pneumatic tyre). tandard pit clear opening sizes are shown on Page 7. eam sizes and other dimensions are shown on Pages 8 and 9. Type F recessed Type solid top Product election Refer to the table to identify which cover and beam configuration you require against pit clear opening length () and pit clear opening span (). ll dimensions are in millimetres. span () mm 4 parts 3 beams 3 parts 2 beams 2 parts 1 beam 5 parts 4 beams length () mm 2 parts 3 parts 4 parts 4 part (2x2) multispan cover with 1 removable support beam 6 part (2x3) multispan cover with 2 removable 8 part (2x4) multispan cover with 3 removable 10 part (2x5) multispan cover with 4 removable part (3x2) multispan cover with 1 removable support beam 9 part (3x3) multispan cover with 2 removable 12 part (3x4) multispan cover with 3 removable 15 part (3x5) multispan cover with 4 removable part (4x2) multispan cover with 1 removable support beam 12 part (4x3) multispan cover with 2 removable 16 part (4x4) multispan cover with 3 removable E E E 20 part (4x5) multispan cover with 4 removable eam centres mm E OVER N FRME 250 FOR RO RRYING OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET Note: For other pit clear opening sizes please refer to our technical department 6 7

oading Group 250 FOR RO RRYING OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET oading Group 250 OEX Medium uty n overs recessed for concrete infill or solid top n over types: F

Type F recessed Type solid top eam ize The required beam size for Multispan covers is dependent on the pit clear opening length and the loading group.

5 oading Group 250 FOR RO RRYING OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET oading Group 250 OEX Medium uty n overs recessed for concrete infill or solid top n over types: F (recessed) (solid top) The details below show plan and sections of a typical recessed/solid top unit. Type F recessed Type solid top eam ize The required beam size for Multispan covers is dependent on the pit clear opening length and the loading group. The table shows maximum beam length against beam size. The removable are supplied by Gatic. The table also indicates dimensions of the beam wallbox and rebate to suit different beam sizes. ee also the accompanying section details. upport beam size chart Removable support beam size Max pit clear opening length () eam wallbox dimensions V W X 152 x 152 x 37kg/m U x 152 x 52kg/m RJ x 165 x 54kg/m U x 171 x 67kg/m U Type F recessed Type solid top OVER N FRME 250 FOR RO RRYING OW-MOVING TRFFI EG, MINOR REIENTI RO, U-E-, PEETRIN PREINT, YR, ET 8 9

oading Group 400 POWER TTION, U TTION, PUMPING TTION, PRKING RE FOR TYPE OF VEHIE oading Group 400 OEX Heavy uty ingle overs and Frames uitable for 11.5 tonne slow moving pneumatic wheel load.

600 x 1200 M 750 x 1200 M Type F Recessed Top overs Recessed Top overs Type F or MR or M olid Top overs Type M Type MR olid Top overs sizes x over type 600 x 600 M 750 x 600 M 900 x 600 M 750 x 750 M

over test load - 400kN Recessed Top overs over type 300 F 450 MR 600 MR 750 MR 900 MR 1050 M 1200 M 1500 M/F Recessed overs Recessed covers can be supplied to cover ducts or trenches as straight runs

6 oading Group 400 POWER TTION, U TTION, PUMPING TTION, PRKING RE FOR TYPE OF VEHIE oading Group 400 OEX Heavy uty ingle overs and Frames uitable for 11.5 tonne slow moving pneumatic wheel load. over test load - 400kN sizes x over type 750 x 300 F 600 x 450 MR 750 x 450 MR 600 x 600 MR 750 x 600 MR 900 x 600 MR 750 x 750 MR 900 x 750 MR 900 x 900 MR 600 x 1050 M 750 x 1050 M 1000 x 1050 M 600 x 1200 M 750 x 1200 M Type F Recessed Top overs Recessed Top overs Type F or MR or M olid Top overs Type M Type MR olid Top overs sizes x over type 600 x 600 M 750 x 600 M 900 x 600 M 750 x 750 M 900 x 750 M 900 x 900 M 600 x 1200 M 750 x 1200 M 1000 x 1000 M uct & Trench overs and Frames uitable for 11.5 tonne slow moving pneumatic wheel load. over test load - 400kN Recessed Top overs over type 300 F 450 MR 600 MR 750 MR 900 MR 1050 M 1200 M 1500 M/F Recessed overs Recessed covers can be supplied to cover ducts or trenches as straight runs or as complex layouts. olid Top overs over type olid top covers are usually supplied in straight runs. Recessed Top overs Type F / M / M/F or MR tandard length olid Top overs over type 600 M 750 M 900 M 1200 M olid Top overs Type M F * * 2 * * * * * 3 * * * 450 MR * * * 4 * 600 MR MR MR M * * * 4 * 1200 M * * * 4 * 1500 M/F * * * 4 * over type tandard length M M M M * * * 4 * OVER N FRME 400 POWER TTION, U TTION - PUMPING TTION N PRKING RE FOR TYPE OF VEHIE *Indicates standard sizes not available - The number shown indicates the quantity of cover parts - Other standard sizes may be available, refer to our technical department. Type M Type M 10 11

7 oading Group 400 POWER TTION, U TTION, PUMPING TTION, PRKING RE FOR TYPE OF VEHIE oading Group 400 OEX Heavy uty uitable for 11.5 tonne slow moving pneumatic wheel load. over test load - 400kN pecification elow is sample specification information and notes for Multispan recessed covers and frames. oading group Gatic tonne slow moving pneumatic wheel load test load 400 kn. Materials overs: uctile iron components to EN 1563:2011. tructural steel removable beams to 4-1:2005 ide Frames: Mild steel. Finishes overs coated with black bitumous solution for protection during transit. Removable supporting steelwork and side frames galvanised to EN IO 1461:2009. Infill and surround concrete by customer oncrete strength, using 10mm coarse aggregate, to be: 45N/mm2 for a test cube of 150mm or 40N/mm2 for a test cylinder of 150mm diameter x 300mm high. Installation In accordance with instructions supplied by Gatic. To specify use size and description format as follows: OEX Multispan Recessed covers and frames over type MR recessed Multiple access covers recessed for concrete infill with removable beams.... in no.... (length) x... (span) mm pit clear opening multi span cover and frame. OEX Type MR uctile Iron Recessed over in... parts complete with... in no.... x... mm galvanised removable support beam spanning the... (length) mm way. uitable for oading Group Tonnes low Moving Wheel oad (pneumatic tyre). OEX Multispan olid Top covers and frames over type M solid top Multiple solid top access covers with removable beams.... in no.... (length) x... (span) mm pit clear opening multi span cover and frame. OEX Type M uctile Iron olid Top over in... parts complete with... in no.... x... mm galvanised removable support beam spanning the... (length) mm way. uitable for oading Group Tonnes low Moving Wheel oad (pneumatic tyre). tandard pit clear opening sizes are shown on Page 13. eam sizes and other dimensions are shown on Pages 14 and 15. Type MR recessed Type M solid top Product election Refer to the table to identify which cover and beam configuration you require against pit clear opening length () and pit clear opening span (). ll dimensions are in millimetres. span () mm 4 parts 3 beams 3 parts 2 beams 2 parts 1 beam 5 parts 4 beams length () mm 2 parts 3 parts 4 parts 4 part (2x2) multispan cover with 1 removable support beam 6 part (2x3) multispan cover with 2 removable 8 part (2x4) multispan cover with 3 removable 10 part (2x5) multispan cover with 4 removable part (3x2) multispan cover with 1 removable support beam 9 part (3x3) multispan cover with 2 removable 12 part (3x4) multispan cover with 3 removable 15 part (3x5) multispan cover with 4 removable part (4x2) multispan cover with 1 removable support beam 12 part (4x3) multispan cover with 2 removable 16 part (4x4) multispan cover with 3 removable E E E 20 part (4x5) multispan cover with 4 removable eam centres mm E OVER N FRME 400 POWER TTION, U TTION - PUMPING TTION N PRKING RE FOR TYPE OF VEHIE Note: For other pit clear opening sizes please refer to our technical department 12 13

oading Group 400 POWER TTION, U TTION, PUMPING TTION, PRKING RE FOR TYPE OF VEHIE oading Group 400 OEX Heavy uty n overs recessed for concrete infill or solid top n over types: MR (recessed) M

Type MR recessed Type M solid top eam ize The required beam size for Multispan covers is dependent on the pit clear opening length and the loading group.

ee also the accompanying section details.

8 oading Group 400 POWER TTION, U TTION, PUMPING TTION, PRKING RE FOR TYPE OF VEHIE oading Group 400 OEX Heavy uty n overs recessed for concrete infill or solid top n over types: MR (recessed) M (solid top) The details below show plan and sections of a typical recessed/solid top unit. Type MR recessed Type M solid top eam ize The required beam size for Multispan covers is dependent on the pit clear opening length and the loading group. The table shows maximum beam length against beam size. The removable are supplied by Gatic. The table also indicates dimensions of the beam wallbox and rebate to suit different beam sizes. ee also the accompanying section details. upport beam size chart Removable support beam size Max pit clear opening length () eam wallbox dimensions Type MR recessed V W X Y 152 x 152 x 37kg/m U x 152 x 52kg/m RJ x 165 x 54kg/m U x 171 x 67kg/m U x 152 x 82kg/m U x 210 x 122kg/m U Type M solid top OVER N FRME 400 POWER TTION, U TTION - PUMPING TTION N PRKING RE FOR TYPE OF VEHIE iagram to come 14 15

Gatic Poulton lose over Kent T17 0UF United Kingdom

com OEX offers an ideal economical solution for use on

9 Gatic Poulton lose over Kent T17 0UF United Kingdom Tel no: Fax no: websites: +44 (0) (0) OEX offers an ideal economical solution for use on all projects where the safe protection of underground services and equipment is required. l Gas and electricity sites l Power stations/sub stations l ewerage and water treatment works/pumping stations l ommercial and industrial sites

GATIC 2000 Index. Section 1. Section 2. Section 3. Section 4. Section 5. Section 6. Gatic 2000 Single Covers & Frames (Section 2)

GATIC 2000 Index. Section 1. Section 2. Section 3. Section 4. Section 5. Section 6. Gatic 2000 Single Covers & Frames (Section 2) GATIC 2000 Index Section 1 COLOUR CODE Page(s) Gatic 2000...4 Major Projects...5 Gatic 2000 Loading Groups...6-7 Gatic 2000 Product Selector Guide...8-9 Gatic 2000 Single Covers & Frames (Section 2) Gatic