Pavement Marking Paint
|
|
- Nancy Sherman
- 5 years ago
- Views:
Transcription
1 Page 1 of 8 Solventborne (1996 & 2003 Std. Specs) UXO4WOO1 (White) No current approved batch, please contact Materials Division UXO4YOO1 (Yellow) No current approved batch, please contact Materials Division Waterborne - Cold Weather (2014 Std. Specs) Ozark Materials, LLC Greenville AL Wolverine (White) [Shelf life 6 months] Lot: TP1810W1271 Date of mfr: 10/23/2018 Lot: TP1810W1284 Date of mfr: 10/29/2018 Lot: TP1812W1354 Date of mfr: 12/7/ Wolverine (Yellow) [Shelf life 6 months] Lot: TP1810Y1272 Date of mfr: 10/23/2018 Lot: TP1810Y1283 Date of mfr: 10/29/2018 Lot: TP1812Y1350 Date of mfr: 12/7/ (White) [Shelf life 6 months] Lot: WP0351 Date of mfr: 10/26/ (Yellow) [Shelf life 6 months] Lot: YP0352 Date of mfr: 10/26/2018
2 Page 2 of ARW-25-M-1 (white) No current approved batch, please contact Materials Division ARY-25-M-1 (Yellow) No current approved batch, please contact Materials Division WX04W004 (White) Lot: TP1801W0045 Date of mfr: 1/24/2018 Lot: TP1802W0079 Date of mfr: 2/6/2018 Lot: TP1802W0106 Date of mfr: 2/14/2018 Lot: TP1803W0161 Date of mfr: 3/5/2018 Lot: TP1803W0183 Date of mfr: 3/13/2018 Lot: TP1804W0250 Date of mfr: 4/5/2018 Lot: TP1804W0252 Date of mfr: 4/7/2018 Lot: TP1804W0282 Date of mfr: 4/7/2018 Lot: TP1804W0336 Date of mfr: 4/20/2018 Lot: TP1804W0342 Date of mfr: 4/20/2018 Lot: TP1804W0363 Date of mfr: 4/26/2018 Lot: TP1805W0387 Date of mfr: 5/3/2018 Lot: TP1805W0388 Date of mfr: 5/3/2018 Lot: TP1805W0704 Date of mfr: 5/8/2018 Lot: TP1805W0748 Date of mfr: 5/17/2018 Lot: TP1805W0754 Date of mfr: 5/18/2018 Lot: TP1805W0764 Date of mfr: 5/22/2018 Lot: TP1805W0767 Date of mfr: 5/22/2018 Lot: TP1805W0788 Date of mfr: 5/30/2018 Lot: TP1805W0790 Date of mfr: 5/30/2018 Lot: TP1806W0804 Date of mfr: 6/1/2018 Lot: TP1806W0815 Date of mfr: 6/5/2018 Lot: TP1806W0822 Date of mfr: 6/6/2018 Lot: TP1806W0829 Date of mfr: 6/7/2018 Lot: TP1806W0835 Date of mfr: 6/7/2018 Lot: TP1806W0837 Date of mfr: 6/9/2018 Lot: TP1806W0842 Date of mfr: 6/11/2018
3 Page 3 of WX04W004 (White) Lot: TP1806W0845 Date of mfr: 6/12/2018 Lot: TP1806W0846 Date of mfr: 6/12/2018 Lot: TP1806W0847 Date of mfr: 6/12/2018 Lot: TP1806W0902 Date of mfr: 6/26/2018 Lot: TP1809W1150 Date of mfr: 9/12/2018 Lot: TP1809W1152 Date of mfr: 9/13/2018 Lot: TP1809W1166 Date of mfr: 9/18/2018 Lot: TP1809W1191 Date of mfr: 9/25/2018 Lot: TP1809W1192 Date of mfr: 9/25/2018 Lot: TP1809W1196 Date of mfr: 9/25/2018 Lot: TP1809W1197 Date of mfr: 9/26/2018 Lot: TP1809W1199 Date of mfr: 9/26/2018 Lot: TP1809W1212 Date of mfr: 9/28/2018 Lot: TP1810W1221 Date of mfr: 10/2/ WXO4LOO4 (Yellow) Lot: TP1801Y0046 Date of mfr: 1/23/2018 Lot: TP1801Y0064 Date of mfr: 1/30/2018 Lot: TP1802Y0082 Date of mfr: 2/8/2018 Lot: TP1802Y0096 Date of mfr: 2/12/2018 Lot: TP1802Y0146 Date of mfr: 2/28/2018 Lot: TP1803Y0182 Date of mfr: 3/12/2018 Lot: TP1804Y0251 Date of mfr: 4/4/2018 Lot: TP1804Y0264 Date of mfr: 4/6/2018 Lot: TP1804Y0279 Date of mfr: 4/7/2018 Lot: TP1804Y0294 Date of mfr: 4/13/2018 Lot: TP1804Y0306 Date of mfr: 4/16/2018 Lot: TP1804Y0338 Date of mfr: 4/20/2018 Lot: TP1804Y0341 Date of mfr: 4/20/2018 Lot: TP1804Y0348 Date of mfr: 4/23/2018 Lot: TP1804Y0364 Date of mfr: 4/27/2018 Lot: TP1805Y0389 Date of mfr: 5/3/2018 Lot: TP1805Y0703 Date of mfr: 5/7/2018
4 Page 4 of 8 Ozark Materials, LLC Greenville AL WXO4LOO4 (Yellow) Lot: TP1805Y0747 Date of mfr: 5/17/2018 Lot: TP1805Y0753 Date of mfr: 5/18/2018 Lot: TP1805Y0765 Date of mfr: 5/22/2018 Lot: TP1805Y0766 Date of mfr: 5/22/2018 Lot: TP1805Y0786 Date of mfr: 5/30/2018 Lot: TP1805Y0791 Date of mfr: 5/31/2018 Lot: TP1806Y0797 Date of mfr: 6/1/2018 Lot: TP1806Y0813 Date of mfr: 6/5/2018 Lot: TP1806Y0814 Date of mfr: 6/5/2018 Lot: TP1806Y0823 Date of mfr: 6/6/2018 Lot: TP1806Y0828 Date of mfr: 6/7/2018 Lot: TP1806Y0834 Date of mfr: 6/7/2018 Lot: TP1806Y0838 Date of mfr: 6/11/2018 Lot: TP1806Y0841 Date of mfr: 6/12/2018 Lot: TP1806Y0844 Date of mfr: 6/12/2018 Lot: TP1806Y0848 Date of mfr: 6/12/2018 Lot: TP1806Y0853 Date of mfr: 6/13/2018 Lot: TP1806Y0901 Date of mfr: 6/26/2018 Lot: TP1808Y1114 Date of mfr: 8/29/2018 Lot: TP1808Y1151 Date of mfr: 9/12/2018 Lot: TP1809Y1213 Date of mfr: 9/28/2018 Lot: TP1810Y1214 Date of mfr: 10/1/2018 Lot: TP1810Y1215 Date of mfr: 10/3/2018 Lot: TP1810Y1216 Date of mfr: 10/3/2018 Lot: TP1810Y1225 Date of mfr: 10/4/2018 Lot: TP1810Y1241 Date of mfr: 10/10/ (White) Lot: WP0096 Date of mfr: 4/9/2018 Lot: WP0256 Date of mfr: 8/1/2018
5 Page 5 of 8 Ozark Materials, LLC Greenville AL The Sherwin Williams Company Highway Products Baltimore - Cleveland - Memphis Vogel Paint & Wax Company, Inc. Orange City IA (Yellow) Lot: YP0097 Date of mfr: 4/9/2018 Lot: YP0257 Date of mfr: 8/1/2018 TM2318 (White) Lot: MP1218XC Date of mfr: 5/1/2018 TM2319 (Yellow) Lot: MP1218JU Date of mfr: 5/1/2018 UC White AR ACR TRF FD Lot: T Date of mfr: 12/18/2018 UC Yellow AR ACR TRF FD Lot: T Date of mfr: 12/18/2018 Lot: T Date of mfr: 12/18/2018 Lot: T Date of mfr: 12/18/2018 VLX (White) Lot: V Date of mfr: 3/7/2018 Lot: V Date of mfr: 3/7/2018 Lot: V Date of mfr: 5/2/2018 Lot: V Date of mfr: 5/2/2018 Lot: V Date of mfr: 6/1/2018 Lot: V Date of mfr: 6/1/2018 Lot: V Date of mfr: 6/1/2018 VLX (Yellow)
6 Page 6 of 8 Vogel Paint & Wax Company, Inc. Orange City IA VLX (Yellow) Lot: T Date of mfr: 9/5/2018 Lot: T Date of mfr: 9/6/2018 Lot: T Date of mfr: 9/11/2018 Lot: V Date of mfr: 3/8/2018 Lot: V Date of mfr: 3/8/2018 Lot: V Date of mfr: 5/2/2018 Lot: V Date of mfr: 5/2/2018 Lot: V Date of mfr: 5/18/2018 Lot: V Date of mfr: 5/31/2018 Lot: V Date of mfr: 5/31/2018 Lot: V Date of mfr: 5/31/2018
7 Page 7 of 8 Method of Documentation of Acceptance: By brand and manufacturer s certification. Certified lots are shown above. The manufacturer shall furnish to the Resident Engineer and the Materials Division a certification for each lot certifying that the material supplied conforms to all the requirements specified and stating that the material is formulated the same as the material tested for QPL listing. This certification shall include: /formulation name Lot number Date of manufacture Lot quantity Purchaser Destination of shipment Quantity of shipment Formulation percentages The Contractor shall furnish to the Resident Engineer a copy of the above certification for each lot of paint used on a project at the time it is used. Containers shall be clearly labeled with: s name /formulation name Lot number Date of manufacture on the top and side of the container. Method of Approval: The manufacturer shall supply certified test reports from an independent testing laboratory showing that the pavement marking paint complies with the requirements of Section of the ARDOT Standard Specifications for Highway Construction. All certified test reports shall include: The manufacturer s name, /formulation name of the paint, Date of manufacture, and Testing of parameters listed in Section (c)(2) including an infrared spectra of the vehicle used in the paint. Spectra shall be of the total vehicle and of the vehicle solids only. The manufacturer shall provide a one quart sample and product information, including printed instructions for application. When specified by Section of the Standard
8 Page 8 of 8 Specifications for Highway Construction, the manufacturer must provide documentation on the brand names of the raw materials and the percentage used in the formulation. Continued approval of a formulation will require constancy to the supplied information and initial testing. Any changes of raw material components in brand or percentages must be submitted to the Department for review. When deemed necessary by the Materials Engineer and at a frequency determined by same, samples of materials listed on the QPL will be taken and tested on a random basis. This testing will be done to affirm that the material is in conformance with the specification.
1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
More informationReflective Sheeting. 3930, White High Intensity Prismatic (HIP) 3931, Yellow High Intensity Prismatic (HIP) 3932, Red High Intensity Prismatic (HIP)
Page 1 of 8 Type III, High-Intensity Grade (ASTM D 4956) 3M 3930, White High 3931, Yellow High 3932, Red Prismatic (HIP) 3935, Blue High 3937, Green High 3939, Brown High Avery Dennison Corporation T-6500
More informationOregon Department of Transportation Standard Specifications For Asphalt Materials 2004
Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004 Effective for contracts and purchase orders advertised after January 1, 2004 Revisions - Changes to the 2003 Asphalt
More informationDMS-9202 Asphaltic Concrete Patching Material (Stockpile Storage or Bagged)
Asphaltic Concrete Patching Material (Stockpile Storage or Bagged) Effective Date: May 2017 1. DESCRIPTION This Specification governs for crushed stone asphaltic concrete intended primarily as a cool-
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-09 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED OCTOBER, 2009 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania
More informationMATERIAL SPECIFICATION FOR ORGANIC SOLVENT BASED TRAFFIC PAINT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 1712 FEBRUARY 1991 MATERIAL SPECIFICATION FOR ORGANIC SOLVENT BASED TRAFFIC PAINT 1712.01 SCOPE 1712.02 REFERENCES 1712.03 DEFINITIONS 1712.05 MATERIALS
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-07 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED JULY, 2007 This is an editorial revision only. The standard currently
More informationUNITED STATES COAST GUARD OCEAN ENGINEERING DIVISION WASHINGTON, D.C. JANUARY 2011 SPECIFICATION FOR THE MANUFACTURE
UNITED STATES COAST GUARD OCEAN ENGINEERING DIVISION WASHINGTON, D.C. JANUARY 2011 SPECIFICATION FOR THE MANUFACTURE OF OPEN LINK, WELDED STEEL CHAIN AND BRIDLES SPECIFICATION NO. 377 REVISION L 1. SCOPE
More informationMemorandum. From: Date: Arports Regional Division Managers
Memorandum Date: To: Arports Regional Division Managers From: Prepared by: Subject: Rick Marinelli, Manager, Airport Engineering Division, AAS-100, x77669 Jefiey Rapol, Civil Engineer, Airport Engineering
More informationMain Roads Technical Standard
Main Roads Technical Standard IMPORTANT INFORMATION The requirements of this document represent Technical Policy of the department and contain Technical Standards. Compliance with the department s Technical
More informationBUCKEYE LEGACY POLISHED CONCRETE ENHANCER & PROTECTANT MODEL SPECIFICATION
1. SCOPE BUCKEYE LEGACY POLISHED CONCRETE ENHANCER & PROTECTANT MODEL SPECIFICATION DETERGENT-RESISTANT WATER-EMULSION ENHANCER AND PROTECTANT FOR CONCRETE FOORS The product desired under this specification
More informationAPPLICATION FOR PRODUCT / ECO-LABELLING CERTIFICATION. GPS Coordinates. GPS Coordinates. Fax No. H/P No.
epcs/for/01-2 SIRIM QAS International Sdn. Bhd. (410334-X) SIRIM Complex, No. 1, Persiaran Dato Menteri, P.O. Box 7035, 40700 Shah Alam, Selangor Darul Ehsan, Malaysia. Tel: 603-5544 6402 Fax: 603-5544
More informationPRODUCT GUIDE MADE IN USA
PRODUCT GUIDE MADE IN USA E-Z Weld, Inc. makes a broad range of high-strength PVC, CPVC, DWV, and ABS solvent cements, cleaners, primers ideally formulated for a variety of pipe joining applications. All
More informationPractice Note on the Sourcing of Threaded Rod Used for Foundation Bolts
MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:
More informationTITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017
TITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017 Last Amended The Oklahoma Register Volume 34, Number 24 September 1, 2017 publication Pages 787-2226 PLEASE NOTE: This
More informationPN /21/ SURFACE SMOOTHNESS REQUIREMENTS FOR PAVEMENTS
PN 420-10/21/2016 - SURFACE SMOOTHNESS REQUIREMENTS FOR PAVEMENTS DESCRIPTION: The surface tolerance specification requirements are modified as follows for all pavements of constant width with at least
More informationPERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE
INCH-POUND 12 December 2014 SUPERSEDING MIL-PRF-6081D w/amendment 1 30 January 2009 PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE This specification is approved for use by all Departments and Agencies
More informationMM-L-751H August 13, 1970 SUPERSEDING Int. Fed. Spec. MM-L-00751G(Army-ME) July 3, 1967 and Fed. Spec. MM-L-751C May 20, 1942 FEDERAL SPECIFICATION
MM-L-751H August 13, 1970 SUPERSEDING Int. Fed. Spec. MM-L-00751G(Army-ME) July 3, 1967 and Fed. Spec. MM-L-751C May 20, 1942 FEDERAL SPECIFICATION LUMBER; SOFTWOOD This specification was approved by the
More informationALBERTA TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT
ALBERTA TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT A. SCOPE This specification covers the production and supply of white and yellow paint, to be applied
More informationQUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL
QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL THE CONTENT OF THIS DOCUMENT IS THE PROPERTY OF ALENIA AERONAUTICA S.p.A. THIS DOCUMENT IS SUPPLIED IN CONFIDENCE AND COMMERCIAL
More informationPERFORMANCE SPECIFICATION
METRIC 05 November 2015 SUPERSEDING MIL-PRF-7870D 30 April 2010 PERFORMANCE SPECIFICATION LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) This specification is approved for use by all Departments
More informationALBERTA INFRASTRUCTURE AND TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC-05 SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT
ALBERTA INFRASTRUCTURE AND TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC-05 SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT A. SCOPE This specification covers the production and supply of white and yellow
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationFLORIDA SHERIFFS ASSOCIATION, FLORIDA FIRE CHIEFS ASSOCIATION, & FLORIDA ASSOCIATION OF COUNTIES
FLORIDA SHERIFFS ASSOCIATION, FLORIDA FIRE CHIEFS ASSOCIATION, & FLORIDA ASSOCIATION OF COUNTIES SPECIFICATION #01 TYPE I AMBULANCE 2 WHEEL DRIVE 4 WHEEL DRIVE OPTIONAL (DIESEL ENGINE, DUAL REAR WHEEL,
More informationPFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels
PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels Scope: This program must be utilized by participating pellet fuel manufacturers to assure consistent quality
More informationINCOMING INSPECTION DELEGATION GUIDELINES FOR ALENIA SUPPLIERS PROGRAM: ALL
INCOMING INSPECTION DELEGATION GUIDELINES FOR ALENIA SUPPLIERS PROGRAM: ALL THE CONTENT OF THIS DOCUMENT IS THE PROPERTY OF ALENIA AERONAUTICA S.p.A. THIS DOCUMENT IS SUPPLIED IN CONFIDENCE AND COMMERCIAL
More informationPN 420-7/18/ SURFACE SMOOTHNESS REQUIREMENTS FOR PAVEMENTS
PN 420-7/18/2014 - SURFACE SMOOTHNESS REQUIREMENTS FOR PAVEMENTS DESCRIPTION: The surface tolerance specification requirements are modified as follows for all mainline lanes and collector-distributor road
More informationRick Marinelli. Manager, Airport Engineering Division, AAS
Memorandum MAY 9 2006 Rick Marinelli. Manager, Airport Engineering Division, AAS-100 - - ~77669~.- To: Airports Regional Division Managers El@ :@jj Prepared by: Jeffrey Rapol, Construction Engineer, Airport
More informationM-11 MARINE DIESEL ENGINE FUEL INJECTOR
Guideline No.M-11(201510) M-11 MARINE DIESEL ENGINE FUEL INJECTOR Issued date: 20 October 2015 China Classification Society Foreword This Guideline constitutes the CCS rules, and establishes the applicable
More informationSFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationCalifornia Department of Food and Agriculture Division of Measurement Standards Petroleum Products Program Fuels and Lubricants Laboratory
California Department of Food and Agriculture Division of Measurement Petroleum Products Program Fuels and Lubricants Laboratory Development of Fuel Quality Specification for Ammonia NH3 Fuel Association
More informationSTANDBY EMERGENCY CNG/LPG GENERATOR
SECTION 16620 STANDBY EMERGENCY CNG/LPG GENERATOR PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Compressed natural gas (CNG) or liquefied petroleum gas (LPG) powered standby emergency generators. B.
More informationNATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY ACT (ACT 9 OF 2014)
284 No. 41473 GOVERNMENT GAZETTE, 2 MARCH 2018 N0.173 DEPARTMENT OF TRADE AND INDUSTRY 02 MARCH 2018 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY
More informationTITLE 252. DEPARTMENT OF ENVIRONMENTAL QUALITY CHAPTER 100. AIR POLLUTION CONTROL
TITLE 252. DEPARTMENT OF ENVIRONMENTAL QUALITY CHAPTER 100. AIR POLLUTION CONTROL SUBCHAPTER 39. EMISSION OF VOLATILE ORGANIC COMPOUNDS (VOCS) IN NONATTAINMENT AREAS AND FORMER NONATTAINMENT AREAS PART
More informationCity of Storm Lake Fire Department Heavy Rescue Specifications
INTENT OF SPECIFICATIONS City of Storm Lake Fire Department Heavy Rescue Specifications It shall be the intent of these specifications to provide a complete apparatus equipped as hereinafter specified.
More informationOtsego County Road Commission
Otsego County Road Commission William T. Holewinski, Jr., Commissioner Troy W. Huff, Commissioner David C. Matelski, Commissioner Jason T. Melancon, Manager Thomas A. Deans, Engineer Rebecca L. Jerry,
More informationSPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT /
SPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT / 2005-06 SR.NO ITEM PAGE 1. SCOPE 2 2. WEATHER CONDITIONS 2 3. RATED VOLTAGE & FREQUENCY 2 4. GENERAL REQUIREMENT
More informationPERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
METRIC 24 January 2005 SUPERSEDING MIL-PRF-81322F 21 July 1998 PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 This specification is approved for use
More informationLead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A. Tube: End-cap: Solder: Adhesive: Marking: 1 A 3 A
RoHS Pb Dimensions and construction: (mm) Tube: End-cap: Solder: Adhesive: Marking: Lead-free glass Nickel plated brass 62 ma 1.25 A Over 1.25 A 3 A Epoxy resin 62 ma less than 1 A 1 A 3 A Sn-0.7Cu Sn-3.0Ag-0.5Cu
More informationTECHNICAL CERTIFICATE
MOTOR VEHICLE RESEARCH INSTITUTE Ltd. UNECE Homologation Laboratory E8/C 12 Lihovarská, Praha 9, CZ 180 68 Fax: +420 284 811 038 E-mail: uvmv@uvmv.cz Telephone: +420 284 814 050 Certificate: 20429-01 Regulation:
More informationSolvent Cements. LOOK INSIDE for the industry s most detailed cure charts. The choice of plumbing professionals.
Solvent Cements LOOK INSIDE for the industry s most detailed cure charts The choice of plumbing professionals. Our Promise Oatey is the choice of plumbing professionals for one simple reason our products
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-48 06 15 (May 2014) ---------------------------------- Preparing Activity: USACE Superseding UFGS-48 13 19.00 10 (January 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationapproved IGS Polyethylene Valves Fax:(9821)
IGS-M-PL-015(1) approved Feb.2013!"# $%& IGS '( )*+,-./# Polyethylene Valves. Fax:(9821)-8131-5679 == >?@# DE ن' A=B $EB= F'&/D*# نG.< H(I >J KL+ DE ن' A=B F=MDE NJ http://igs.nigc.ir igs@nigc.ir N.I.G.C.
More informationREPORT NO INSPECTION, TEST AND EVALUATION OF. Interlock Kits SUBMITTED TO MASTER ELECTRICAL SERVICES 3107 LANVALE AVENUE RICHMOND, VA 23230
: November 16, 2009 REPORT NO. 52431-01 INSPECTION, TEST AND EVALUATION OF Interlock Kits SUBMITTED TO MASTER ELECTRICAL SERVICES 3107 LANVALE AVENUE RICHMOND, VA 23230 A WYLE LABORATORIES, INC. WYLE is
More information020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service
More informationRequirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection of Air Compressors (draft)
Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection of Air Compressors (draft) 1. The air compressors referred to in this Announcement are those driven
More informationSolvent Cements. Look. The choice of plumbing professionals. for the industry s most detailed cure charts
Solvent Cements Look Inside for the industry s most detailed cure charts The choice of plumbing professionals. Our Promise Oatey is the choice of plumbing professionals for one simple reason our products
More informationCase 1:16-cv Document 1 Filed 08/18/16 Page 1 of 13 IN THE UNITED STATES DISTRICT COURT FOR THE DISTRICT OF COLUMBIA
Case 1:16-cv-01687 Document 1 Filed 08/18/16 Page 1 of 13 IN THE UNITED STATES DISTRICT COURT FOR THE DISTRICT OF COLUMBIA ) UNITED STATES OF AMERICA, ) ) Civil Action No. Plaintiff, ) v. ) ) HARLEY-DAVIDSON,
More information013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS
013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification
More informationCh. 126 STANDARDS FOR MOTOR FUELS CHAPTER 126. MOTOR VEHICLE AND FUELS PROGRAMS
Ch. 126 STANDARDS FOR MOTOR FUELS 25 126.1 CHAPTER 126. MOTOR VEHICLE AND FUELS PROGRAMS Subchap. Sec. A. OXYGENATE CONTENT... 126.1 B. [Reserved]... 126.201 C. GASOLINE VOLATILITY REQUIREMENTS... 126.301
More informationSFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationPERFORMANCE SPECIFICATION SHEET BATTERY, STORAGE, AIRCRAFT, MAINTENANCE-FREE, 24-VOLT, 1.5-AMPERE-HOUR
METRIC MIL-PRF-8565/6A (AS) 25 June 2001 SUPERSEDING DOD-B-8565/6(AS) 26 June 1987 PERFORMANCE SPECIFICATION SHEET BATTERY, STORAGE, AIRCRAFT, MAINTENANCE-FREE, 24-VOLT, 1.5-AMPERE-HOUR This specification
More informationPlan Check Policies and Guidelines
VIII. TRAFFIC SIGNING AND STRIPING PLANS A. INTRODUCTION Traffic signing and striping plans are required for all General Plan Roads and any roadway that is 56-foot wide curb-to-curb (78 R/W) or wider.
More information1.0 DESCRIPTION. This specification covers the system of the Portable Sign Stands, Roll-up Signs, and Flags.
PORTABLE SIGN STANDS AND ROLL-UP SIGNS (MGS-04-02C) 1.0 DESCRIPTION. This specification covers the system of the Portable Sign Stands, Roll-up Signs, and Flags. 2.0 PORTABLE SIGN STAND GENERAL. Portable
More informationTOPAS 2130A (Draft v3)
TOPAS 2130A (Draft v3) Revision Date Scope Authorised by A (v1) 10/10/17 Draft A (v2) 11/11/17 Draft A (v3) 15/12/17 Draft Traffic Open Products And Specifications Limited 2017. This document is the property
More informationVIRGINIA VAN START PROGRAM FOR NEW VANPOOLS
VIRGINIA VAN START PROGRAM FOR NEW VANPOOLS The Virginia Van Start program for new vanpools is designed to provide impetus for new vanpool formations. The program temporarily subsidizes empty seats during
More informationLaboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment Tested under ASSE Standard 1022 ASSE: 2003 ANSI:
More information10P20-44 High Solids Epoxy Primer
Product Group High solids epoxy primer Characteristics Product Information - A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft. It provides excellent corrosion resistance
More informationSPECIAL SPECIFICATION 6576 Solar Panel Power Supply System
2004 Specifications CSJ 1068-04-126, 0197-02-108 SPECIAL SPECIFICATION 6576 Solar Panel Power Supply System 1. Description. This work shall consist of furnishing and installing an integrated solar Panel
More informationare widely used because they provide a standardized surface for testing.
Steel Panels Steel panels are made from standard low-carbon, cold-rolled steel complying with ASTM A1008, A-109 and QQS- 698. Smooth Finish Steel Panels, Type QD have a smooth, bright finish produced at
More informationImporting Motor Vehicles into the United States
Importing Motor Vehicles into the United States Presentation for the AAMVA Annual International Conference August 22, 2017 San Francisco, California Coleman Sachs, Chief, Import and Certification Division
More informationFEDERAL SPECIFICATION METHANOL (METHYL ALCOHOL) 1.1 Scope. This specification covers three grades and four unit quantities of methanol.
NOT MEASUREMENT SENSITIVE 19 January 2016 SUPERSEDING O-M-232L 4 January 2006 FEDERAL SPECIFICATION METHANOL (METHYL ALCOHOL) The General Services Administration has authorized the use of this federal
More informationVEHICLE MAINTENANCE PROGRAM
VEHICLE MAINTENANCE PROGRAM Prepared by: SCOTT PARTRIDGE Transportation Manager Version: 5.05.14 Effective Date: 5 MAY 2014 The undersigned has read, understands and agrees to comply with the information
More informationUniversity of Houston Master Construction Specifications Insert Project Name
SECTION 26 13 13 MEDIUM VOLTAGE SWITCHGEAR PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More informationGeneral Specifications
General Specifications Bid # 2372 Fire Hydrants Water Resource Department The contract period for these items is for 1 full year beginning the effective date of the awarded contract, December 1, 2012 to
More informationTube: End-cap: Core: Solder: Lead-free glass Nickel plated brass Ceramic Sn-1.5Cu. Pb87.5-Sn10-Ag2.5* ma less than 1 A.
* 1 RoHS Dimensions and construction: Tube: End-cap: Core: Solder: Lead-free glass Nickel plated brass Ceramic Sn-1.5Cu (mm) Marking: Pb87.5-Sn10-Ag2.5* 1 100 ma less than 1 A 1 A 15 A SOC [rated current]
More informationCITY OF HAYS, KANSAS BID PROPOSAL REQUEST FOR A COLD PLANER TABLE OF CONTENTS
CITY OF HAYS, KANSAS BID PROPOSAL REQUEST FOR A COLD PLANER TABLE OF CONTENTS INVITATION TO BID PAGE 1 BID INSTRUCTIONS PAGE 2 GENERAL INFORMATION/TECHNICAL SERVICES TAXES PAGE 3 ITEM SPECIFICATIONS PAGE
More informationENGINEERING AND CONSTRUCTION BULLETIN
ENGINEERING AND CONSTRUCTION BULLETIN No. 2007-21 Issuing Office: CECW-CE Issued: 16 Nov 2007 Subject: Revision to EM 1110-2-1424 Lubricants and Hydraulic Fluids - Appendix C Applicability: Guidance 1.
More informationB. Base occupied space sound level estimates on ARI 885. C. Terminal heating coils shall conform to ARI 410.
PART 1 - GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationKAUAI ISLAND UTILITY COOPERATIVE KIUC Tariff No. 1 RULE NO. 17 NET ENERGY METERING
Third Revised Sheet 55a Cancels Second Revised Sheet 55a A. ELIGIBLE CUSTOMER-GENERATOR RULE NO. 17 NET ENERGY METERING Net energy metering is available to eligible customer-generators, defined as, permanent
More informationLead-free glass Nickel plated brass Ceramic 100 ma 15 A. Tube: End-cap: Core: Solder: 200 A. Marking: 100 ma 8 A Over 8 A 20 A. Rated breaking current
* RoHS Dimensions and construction: (mm) Tube: End-cap: Core: Solder: Marking: Lead-free glass Nickel plated brass Ceramic 100 ma 15 A 20 A 100 ma 8 A Over 8 A 20 A Sn-1.5Cu Pb87.5-Sn10.0-Ag2.5* Pb90-Cu*
More informationRenewable Energy Interconnection Manual for Small Size Systems ( 10kW in NM 20kW in TX) Renewables and Emergent Technologies Group
Renewable Energy Interconnection Manual for Small Size Systems ( 10kW in NM 20kW in TX) Renewables and Emergent Technologies Group Table of Contents 1. Introduction... 1 2. Purpose... 1 3. Customer Eligibility...
More informationTIGER Drylac ral colors. exterior powder coatings
TIGER Drylac ral colors exterior powder coatings series 49 Weather Resistant TGIC Polyester Powder Coatings for Exterior and Interior Applications Features: Good weather resistance, good mechanical properties,
More informationThe attached pre-qualification application should be submitted with your bid, in a separate sealed envelope.
BL098-17 October 9, 2017 INSPECTION, MAINTENANCE AND REPAIR OF HOISTS AND CRANES ON AN ANNUAL CONTRACT ADDENDUM #1 BL098-17 The following should be added to the above-referenced bid. The attached pre-qualification
More informationPOLYMED CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS
CATALOGUE 2013 POLYCARBONATE STOPCOCKS MANIFOLDS - CONNECTORS General Information COMPLIANCE PRODUCT The Luer taper fittings are conform to standard ISO 594-1 for syringes, needles and other medical devices.
More informationGUBKIN E&TC (TS ) Specifications. Orenburg. The foreword
GUBKIN E&TC Material Safety Data Sheet (TS 21 1220-001-91846079-12) Sulfur polymeric modified grinded to produce sulfur concrete, rubber products and rubber Specifications TS 21 1220-001-91846079-12 Orenburg
More informationAppendix A Technical Specifications Class I, II, III, IV Sewage Pumping Lift Station Wet Well Cleaning and Hauling
Appendix A 075-18 Technical Specifications Class I, II, III, IV Sewage Pumping Lift Station Wet Well Cleaning and Hauling INTENT JEA is soliciting proposals for industrial services to remove & dispose
More informationBIHAR STATE POWER TRANSMISSION COMPANY LIMITED MANUFACTURING QUALITY PLAN -- BATTERY CHARGER. Quantum of Check / Sampling with basis
A. Section : RAW MATERIAL INSPECTION 1.0 ELECTRONIC COMPONENTS 1.1 RESISTORS (Metal Film, Wire Wound) 1.2 POTENTIOMETERS 1.3 CAPACITORS (Polystyrene, electrolytic) 1.4 TRANSISTORS 1.5 L E D 1.6 1.7 INTEGRATED
More informationSFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 *
SFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 * PRODUCT: Drag Race Front Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationGuideline No.M-10(201510) M-10 Marine Diesel Engine Fuel Injection Pump
Guideline No.M-10(201510) M-10 Marine Diesel Engine Fuel Injection Pump Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical
More informationPlan Check Policies and Guidelines
Plan Check Policies and Guidelines VII. A. INTRODUCTION Traffic signing and striping plans are required for all General Plan Roads and any roadway that is 56-foot wide curb-to-curb (78 R/W) or wider. Transportation
More information2017 Edition Updated: August 22, Unit Ventilators: 840
2017 Edition Updated: August 22, 2017 Unit Ventilators: 840 The latest issue of the directory may be downloaded, at no charge, from www.ahridirectory.org. Other certified products are published in the
More informationState of California AIR RESOURCES BOARD EXECUTIVE ORDER VR-302-B
State of California AIR RESOURCES BOARD EXECUTIVE ORDER VR-302-B Standing Loss Control Vapor Recovery System for New Installations of Aboveground Storage Tanks WHEREAS, the California Air Resources Board
More informationÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION THINNER, SYNTHETIC RESIN ENAMELS This specification has been approved by the Commissioner,
More informationSECTION 118 ASPHALT MATERIAL
SECTION 118 ASPHALT MATERIAL 118.1 GENERAL REQUIREMENTS Transporting conveyances for asphalt material shall be free of contaminating material. A record of material hauled the previous load in truck transport
More information2013 FUEL & OIL / LUBRICANT PRICING
2013 FUEL & OIL / LUBRICANT PRICING EFFECTIVE JANUARY 1, 2013 (Updated August 23, 2013) INCLUDES: Pre-Mixed Fuel (2-Stroke) Pre-Mixed Fuel (4-Stroke) Bar & Chain Oil 2-Stroke Engine Oil - XP Professional
More informationAmerican Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1012 - REVISED: 2009 Backflow Preventers with an Intermediate Atmospheric Vent Separate, complete laboratory evaluation
More information600 A 15 and 25 kv class Cleer grounding elbow
Loadbreak/Deadbreak Connectors CA650013EN Supersedes March 2015 COOPER POWER SERIES 600 A 15 and 25 kv class Cleer grounding elbow General Eaton provides a visible ground on its Cooper Power series 600
More informationQ10. What are the payment terms? A10. Payment terms vary per participating agency. Refer to Page 16 of bid document.
June 22, 2017 ADDENDUM #1 BL061-17 Purchase of Gasoline and Diesel Fuel on an Annual Contract Please see questions, answers, and clarifications to the abovementioned bid. Q1. Are bonds required? A1. No
More informationModel MTB-ASME Vertical Pre-Piped Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Pre-Piped Bladder Tanks Features n Pre-piped configurations with a wide selection of proportioner sizes, including the SKUM TPW-150 MK2 for closedhead sprinkler systems
More information7 The revised IS 8034:2002 and revised STI be implemented w.e.f. 1 Feb 2005.
BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III) Our Ref: CMD-III/16:8034 25 Oct 2004 Subject: Implementation of revised IS 8034:2002 Submersible Pump Sets and revised STI (Doc:STI/8034/5 ) IS
More informationInstructions for Completing Oncor s Interconnection Application For Solar PV Projects
Instructions for Completing Oncor s Interconnection Application For Solar PV Projects Program Year 2009 Take a Load Off, Texas SM is provided by Oncor Electric Delivery LLC as part of the company s commitment
More informationANNEXURE XI. (Ni Cd Battery Bank) TECHNICAL SPECIFICATIONS OF 125V STATION BATTERY BANK OF GTG I.
ANNEXURE XI (Ni Cd Battery Bank) TECHNICAL SPECIFICATIONS OF 125V STATION BATTERY BANK OF GTG I. Sr. No Technical Particulars Confirmation to be given by bidder (Please strike out which ever not applicable)
More informationDEP7007CC Compliance Certification
Commonwealth of Kentucky Natural Resources & Environmental Protection Cabinet Department for Environmental Protection DIVISION FOR AIR QUALITY DEP7007CC Compliance Certification Division Use Only ID# Permit
More information4. MARKING: Each cistern shall be provided with a label containing the following information or the information paper strip pasted to it.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FLUSHING CISTERNS FOR WATER CLOSETS AND URINALS (SECOND REVISION) ACCORDING TO IS: 7231-1994 1. LABORATORY: A testing laboratory shall be maintained
More informationSTR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B
STR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B February 2017 STR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B DRAFT FINAL DRAFT CONTRACT
More informationINVITATION TO BID. January 10, 2018
INVITATION TO BID January 10, 2018 The City of Bainbridge will receive sealed bids for ONE NEW PORTABLE TANDEM STATIC ROLLER to be LEASED FOR PURCHASE, as described in the attached specifications until
More informationThe Latest Technologies Come to Emu Oil Refining
The Latest Technologies Come to Emu Oil Refining (A news release from David L. Long, President of Longview Farms, Bloomsburg, Pennsylvania.) Safety and quality have long been an issue with regard to Emu
More informationRequest For Bids Elko County Solid Waste Refuse Hauling and Disposal in the Midas Solid Waste Management Districts
Request For Bids Solid Waste Refuse Hauling and Disposal in the Midas Solid Waste Management Districts is requesting bid proposals for the Solid Waste Refuse Hauling and Disposal for the Midas Solid Waste
More informationSECTION GENERAL MOTOR REQUIREMENTS FOR PLUMBING EQUIPMENT
SECTION 22 05 12 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable in the section
More information