2013 SPRING LAUNCH. (Please Print) Name: Date: Address:

Transcription

1 2013 SPRING LAUNCH (Please Print) Name: Date: Address: City: State: Zip: Phone: Home Cell Boat Name: Reg. # Boat Mfg: Model: Year: Length: ft. Beam: ft Number of Engines: 1 2 Inboard Outboard I/O H.P. Engine Mfg: Year: Are we currently brokering your boat? Normally our customer s boats are hauled using the requested launch date in the Winter Storage contract as a guide to determine placement in the yard. That was not possible last October, as a result some boats were blocked further back than they would have been otherwise. You can help our Service Department minimize any delays during Spring Launch by selecting a date you would like your boat launched in the space provided and we will make every effort to accommodate you. Requested launch date: Please select the Spring service options you would like performed By filling in the desired item in the space next to the service description Outboard Motor Tune Up Service Includes replacing spark plugs, air filter where applicable fuel filter, power head anodes, alternator belt replacement, trim fluid check, clean/lube linkages and control cables, grease lubrication points, replace corrosion control anodes. Check Fluid Levels where applicable power steering, power trim fluid, crank case oil, 2 stroke motor oil reservoir levels. Hydraulic Trim Tab and transom anode if applicable. Perform computer diagnostics service Mercury Outboard specific 2 Stroke Outboard.....$ Parts ea. Four Stroke Outboard....$ Parts ea. Verado Outboard $ Parts ea. 1

2 Stern Drive/Inboard Gasoline Powered Engine Tune Up Service Includes replacing spark plugs, cleaning intake air flame arrestor, replace fuel filters, replace engine cooling system sacrificial anodes, inspect/adjust engine belts, replace distributor cap and rotor, inspect ignition wires, adjust ignition timing, adjust carburetor where applicable, check fluid levels, clean intake sea strainer where applicable, perform computer diagnostics EFI models Four Cylinder. $ Parts ea. Six Cylinder..$ Parts ea. Eight Cylinder....$ Parts ea. Diesel Engine Service Clean/replace intake air filter, clean/replace crank case ventilation filter, adjust auxiliary belts, replace primary and secondary fuel filters, replace engine sacrificial anodes, clean engine sea strainers, inspect cooling/exhaust hoses, check engine/transmission fluid levels. Diesel engine service.$ Parts ea. Cooling System Service Gasoline inboard/sterndrive engine closed cooling system flush and fill.....$ Parts ea. Diesel engine closed cooling system flush/fill $ Parts ea. Battery Service Clean cable connection at battery, secure connections, apply corrosion inhibitor, Check fluid level Excludes maintenance free charge battery. Group And 31 series $28.00 ea. Group 4D 6D and 8D series... $32.00 ea. Battery replacement Service includes all of the above Group 24, 27 and 31 series $62.50 for the first battery $31.25 ea. Additional + Parts Group 4D, 6D and 8D series $85.00 for the first battery $42.00 ea. Additional + Parts Dewinterizing Service Gas Engine Service includes checking fluids, engine inspection, starting engine, clean intake strainer, monitoring engine for normal operating specifications under no load conditions See note #11 Required fluids not included... $95.00 ea. Included in tune up service Dewinterizing Service Diesel Engine Service includes checking fluids, engine inspection, starting engine, monitoring engine for normal operating specifications under no load conditions, cleaning of engine intake strainer, see note #11 required fluids not included see Note #11.. $ ea. Included in diesel engine service Gasoline Engine Fuel filter Service Replace primary water separating fuel filters to motors...$ Parts ea. Included in tune up service Generator Tune Up Service Gasoline Powered Units Service includes spark plug replacement, primary and secondary fuel filter replacement, belt adjustment/replacement, intake air filter where applicable, cooling system corrosion anode, fluid check, distributor cap ignition breaker points and rotor where applicable cleaning of water intake strainer, voltage output test.....$ Parts 2

3 Generator Service Diesel Powered Unit Service includes primary and secondary fuel filter replacement, belt adjustment/replacement intake air filter replacement where applicable, cooling system corrosion anode replacement, fluid check, intake strainer cleaning, unit voltage output test..... $ Parts Generator Dewinterizing Service Service includes fluid check, cleaning raw water intake strainer, check unit operation,...$ Parts Outdrive Service Mercruiser Alpha one drive services with water pump Impeller kit replacement, remove drive and inspect universal assembly, drain fluid pressure/vacuum test unit, fill with hi performance gear lube install with new gaskets and sealing rings $ ea. Mercruiser alpha One/Bravo I II & III Drive Service without water pump service.. $ ea. Out drive gear lube fluid change only without removal inspection and vacuum/pressure test $ ea. Outdrive Powered Boat Anode Replacement Mercruiser Alpha/Bravo I drive anode replacement Parts Included. $ ea. Mercruiser Bravo II & III Parts Included......$ ea. Volvo Penta and OMC Drive systems Parts NOT Included.. $ ea. Hydraulic trim tab and transom anode replacement with this service...$ Parts Outdrive Painting Prep drive housing and gimbal assembly apply anti fouling paint designed for sterndrive applications. Parts Included $ ea. See Note #9 Hull and Running Gear Anode Replacement Inboard Boats Boats up to $ Parts ea. Boats 26 to 35..$ Parts ea. Boats 36 and up... $ Parts ea. Outboard Motor Anode Replacement Service includes removing and replacing sacrificial anodes on the motor lower unit and transom assembly Parts Included Mercury outboard to 275 hp excludes Verado.. $ ea. Mercury Verado Outboards....$ ea. Yamaha two and four stroke motors to 275hp..$ ea. Hydraulic trim tab and transom anode replacement with this service. $49.00 ea. + Parts Commissioning Onboard Systems Service includes commissioning of potable water systems, head sanitation systems, washer/dryers, shower sumps, salt/fresh water wash downs, transom showers, fish box s live well pumps, cockpit sinks, icemaker/freezer unit s potable water tank flush. See Note #8 Boats up to 25.. $ Boats 26 to $ Boats 29 to $ Boats 33 to 38...$ Boats 38 to 42...$ Boats 43 and up....$ Air Conditioning System Commissioning Service includes cleaning of water intake strainer, bleeding cooling water system, system check for water leaks, cleaning return air filter energize/test unit.....$59.00 Additional zone......$23.99 ea. Eskimo Ice Maker Commissioning Bleeding of system, flushing the potable water inlet reservoir, replacing potable water filter, cleaning the raw water strainer, running unit check for leaks...$ Parts 3

4 Shrink Wrap Removal/Disposal See Notes #7 and #14...$3.00 ft. Canvas Installation Bimini top.... $ Sport boat enclosure.....$ Bridge boat enclosure......$ See Note #14 Temporary Tie Up In Slip See notes # $55.00 Wash and wax Service Note: Some boats may require compounding in order to restore the finish, an additional fee is required for this procedure. In some extreme cases or with dark colored hulls the compounding procedure will not restore the finfish completely. Wash/Wax Hull Rub Rail to Water Line Includes washing boat applying wax to hull area and machine buff. $12.00 per ft. Wash/Wax Hull and Top Side Sport Boat/Yacht. Includes exterior wash applying wax to hull, topside and cockpit area, clean isinglass, and bright work machine buff clean cockpit cushions and compartments......$24.00 per ft. Wash/Wax Hull and topside Bridge Boats Includes all of the above with the addition of waxing the bridge area and cleaning anodized tower supports fish boxes and bait wells $27.00 per ft. Interior Cleaning Call for estimate Fiberglass Compounding Service Prior to Waxing Sport Boats/Yachts Note: only available with waxing service....$6.00 per ft. Fiberglass Compounding Service Prior to Waxing Bridge Boats Note: only available with waxing service..$8.00 per ft. Propeller Reconditioning Propeller reconditioning balancing propeller hub replacement and welding services available Computer balancing now available...call for estimate Note: Propellers will need to be removed and sent to reconditioning facility in order to accurately quote repair. Labor charges will apply for removal and installation. 4

5 In addition to the above listed services, Clarks Landing also offers the following along with many other services you may be interested in: Strut Bearing Replacement Service Shaft/Rudder Packing Service Engine/Generator Oil Change Service Engine/Generator Raw Water Cooling Pump Service Transmission Service Fiberglass/Gel Coat Repair Soda Blasting/Bottom Paint Removal There may be other services you would like performed on your boat. Please list any other services your boat requires on the lines provided below. 5

6 NOTES 1. All accounts must be paid in full prior to launch, including your Spring Launch work orders. 2. Boats were put on land according to the date you requested to be re-launched on your winter storage contract. Please make sure you have completed any work that needs to be done prior to this date. If you change this date, there may be a charge for relocating your boat. We will do our best to accommodate you. Due to uncontrollable forces (i.e. weather) Clarks Landing Marina cannot guarantee the exact date your boat will be launched. 3. It is the responsibility of the boat owner to inform Clarks Landing Marina if the boat was previously painted with Micron. Micron paint must be used again since it is the only paint that will adhere to previously painted Micron bottoms. 4. Boat bottoms will be painted the same color as the existing color with Interlux bottom paint. If you would like a different color or a special please indicate in the space provided under bottom paint. A half hour free scraping charge is included. If additional time is required, you will be notified. 5. Sandblasting is not permitted in Clarks Landing Marina. 6. Clarks Landing has been recognized by the NJ Department of Environmental Protection as a New Jersey Clean Marina. This requires the following procedures be adhered to: A. Boat owners are not permitted to scrape, sand, or bottom paint their boats while on marina property. The waste material is considered hazardous waste and must be disposed of through licensed haulers. B. Waste oil disposal. Clarks Landing provides a waste oil tank for customer use via the service department. Oil filters are to be drained completely on the rack provided. Under no circumstances shall oil filters be disposed of in the trash bins. C. Ethyl glycol Permanent anti freeze must be recycled. It cannot be discharged onto the ground. D. The trash bins at Clarks Landing are for trash generated while at the marina. Please do not bring your trash from outside and dispose of it in these receptacles. You will be responsible for the clean up costs of any hazardous material deposited in these receptacles or on marina property along with any fines or penalties. E. Clarks Landing has the right, but not the obligation to clean up any violations and bill the responsible party accordingly. F. Customers removing their own shrink wrap must remove the material from marina property. 7. Does not include installation of bimini tops or enclosures. 8. Consists of adding some water to the tank and test that system pressurizes and pump works. 9. With the outdrive and outboard painting, if necessary, the fist half hour of scraping and sanding will be FREE. However, any additional time will be billed out as time and material. 10. The tune-up price includes adjusting carburetor/set timing/installing spark plugs. The price does not include launch and test run. Therefore, if needed, customer will be billed for labor only on test runs. 11. We will not commission any engine not winterized by Clarks Landing Marina. 12. Temporary slip tie-up: Customer does not have to be present at time of launch. Clarks Landing Marina will notify owner when boat is launched and moored in slip. Owner to secure lines within 24 hours of notification. Mooring lines must be in boat prior to launch date. If lines are missing or in questionable condition, new lines will be installed (2 bow, 2 stern, 2 spring lines) and billed to the customer. 13. A minimum of three (3) days prior to tentative launch date, boat owner must drop off a spare set of keys to ignition and all locks onboard. 14. Clarks Landing assumes no responsibility for damage to canvas, isinglass, zippers tracks, stitching or fasteners, during the installation process as this is generally an indication of aged or degraded material. The customer will be contacted in the event the enclosure is found to be in need of repair. 15. Due to space limitations it is imperative that you remove your boat after the services have been completed. Boats remaining on land or in the water for more than 5 days after completion of the work will be subject to a storage fee of $2.00 per foot per day. ATTENTION BOATERS Tune up kits, boat cleaning materials, dock boxes, dock lines, oils, batteries and Mercury parts are all available in our Parts Department and Ship Store. 6

7 Please read and abide by all Terms and Conditions of Clarks Landing Marina. Our Service Department is available to you if you have any questions. Payment for parts and service is due upon completion of work. Authorization below allows Clarks Landing Marina to apply payment to your invoice. Please indicate your payment method: I hereby authorize the repair work to be done along with the necessary material. You and your employees may operate my boat for the purpose of testing, inspecting or delivery at my risk. An express mechanic s lien is acknowledged on boat to secure the amount of repairs thereto. The factory warranty constitutes all of the warranties with respect to the sales of parts and accessories. Clarks Landing Marina hereby expressly disclaims all warranties, MasterCard Visa Card # Exp. Date: Please list the following for security purposes: Name as printed on card Security Code Billing address for credit card (required by the credit card company) Authorized Signature Current Date Please call the Service Department if you have any questions. (732) Fax (732) clmservice@clarkslanding.com Hours: Monday thru Friday 8:00 am 4:30 pm 7