LIFTING BEAMS STANDARD
|
|
- Lily Morgan
- 5 years ago
- Views:
Transcription
1 LIFTING BEAM TANDAD Made in France fixed VT page 30 fixed I-shaped CDMA page 30 multi-position adjustable AC page 31 continuous adjustable BC page 31 double spreaders PD page 32 fixed semi-lifting beams V page 33 double semi-lifting beams P page 33 for sheets LT page 34 adjustable spreaders for coils page 32 lifting beams for tilting page 34 Meet European Directive 2006/42/EC essential requirements Comply with tandard NF/EN Non load-bearing welds Non welded hook pins teel plates with resilience at -20 C
2 LIFTING BEAM PECIAL Made in France Among our productions: Double spreadbeam 7,5 t Lifting of two parts at the same time Clamping without compression ecured clamping Operation performed by one person Important time savings alf automatic spread beam 7 t Automatic closing and opening Allows stacking Operation performed by one person Important time savings Load beam for bogeys 1,5 t Adjustable ecured clamping by wheels
3 Made in France ecured automatic lifting beam Patented AFETY + EGONOMIC Automatic closing and opening Fully mechanical automatic system (no electrical engine, no hydraulic device) Clamping system adapted to load Avoid presence of operator in dangerous zones ecured against impacts Important time savings This lifting beam is designed to meet the demand for the following main requirements : Avoid the operator to work in dangerous situations (risk of falling 4 m) aving a system to secure grip, even when vertically upward pulse due to shock. The secured automatic lifting beam of meets the requirements, using only mechanical solutions, and, in addition, brings the following advantages : Automatic closing and opening elf-centering to taking the pieces igh tolerance to the position of the piece when taking (tilt-roll) No degradation of the piece by clamping effect No wear on the rubber bearing pads Important time savings Very low maintanance The system avoids the disadvantages of systems made by clamping (shock sensitive), and is adequate for many applications.
4 Made in France Load beam for metal sheets bundles AFETY + EGONOMIC Loading-unloading of metal sheet bundles of multiple sizes ecured longitudinaly and lateraly elf-centering of load Avoids sliding of metal sheet Compact Operated by one person Important time savings This lifting beam is designed to meet the demand for the following main requirements : Fast and secured unloading of metal sheet bundles from a truck Capability of multiformat ( length and width) metal sheet bundles Minimum lost area between two bundles All operations performed at one end Compatibility with warehouse constraints The load beam for metal sheets bundles of meets the requirements, using only mechanical solutions, and, in addition, brings the following advantages : Logitudinal and lateral self centering of the load Balanced load regardless of the format Possibility of motorization Very low maintanance
5 Technical data sheets Le Mesnil-le-oi
6 Fixed lifting beam VT pread C D A B C otating hook pread C D E F Double central beam making a box ooks allowing slings with an angle of max G J K L M N Fixed lifting beam CDMA preads C x E D x A x B 215 x C x D x E x F x G x x J x K Double central beam making a box x L x M 26 x N x P Equipment meeting the essential requirements of European Directive 2006/42/CE and tandard NF EN upplied with CE certificate of conformity Le Mesnil-le-oi
7 Adjustable lifting beam AC preads B / C D Pitch 475 / A / B otating hook pread mini B pread maxi C Fast balancing of loads. pread adjustable stepwise. Double central beam making a box ooks allowing slings with an angle of max / C 420 / D 470 / E 580 / F 555 / G / / J / K 750 / L / M 750 / N Adjustable lifting beam BC preads B / C D 500 / A / B 500 / C 550 / D otating hook pread mini B pread maxi C 600 / E 600 / F 650 / G / Fast balancing of loads pread contnuously adjustable (2 independant screws). Double central beam making a box ooks allowing slings with an angle of max / J / K 700 / L / M 900 / N Equipment meeting the essential requirements of European Directive 2006/42/CE and tandard NF EN upplied with CE certificate of conformity Le Mesnil-le-oi
8 Double lifting beam PD preads C & E D A B C D E F G J K Adjustable spread on requets L M N P Adjustable lifting beam for coils preads B / C x E / x A / x B / x C / x D Double central beam making a box pread adjustable stepwise Equipment meeting the essential requirements of European Directive 2006/42/CE and tandard NF EN upplied with CE certificate of conformity Le Mesnil-le-oi
9 Fixed semi-lifting beam V pread C D A B C D E F G J K Adjustable spread on requets L M N P Double semi-lifting beam P preads C & E D A B C D E F G J K L Adjustable spreads on requets M N P Equipment meeting the essential requirements of European Directive 2006/42/CE and tandard NF EN upplied with CE certificate of conformity Le Mesnil-le-oi
10 Lifting beam for sheets LT Code 9098 pecial models and capacity (force) on request. Lifting beam for tilting with manoeuvre chain Code 9100 mooth tiliting of the load no brutal movement. The system stays still as soon as the chain is released. Endles chain thread F Developed length L Offset A pread C manoeuvre chain For all request, please give dimensions E, M, J or the diametre of the loads Equipment meeting the essential requirements of European Directive 2006/42/CE and tandard NF EN upplied with CE certificate of conformity Le Mesnil-le-oi
AEROTRANSPORT LASHING
AEROTRANSPORT LASHING Made in France Secured lashing lug PSP Patented Lashing using oval and pear holes of ISO corners (ISO 1161) INSTALLING AND SECURING technical data sheet pages 52-55 SAFETY + EASY
More informationMILD STEEL CHAIN & FITTINGS
MILD TEEL CHAIN & ITTING CHAIN IDENTIICATION 84 PWB GADE L CHAIN 85-86 AMOGALV 86 PWB POO COIL CHAIN 87-88 PLIT LINK 89 PWB Anchor Chain identification Grade L Chain - Chain identification (6.00mm - 22.00mm)
More informationBelow the Hook Lifting
SECTION INDEX S E C T I O N 1 3 BALE LIFTING TONG...-14 BARRIER GRABS...- 14 BEAM TONGS...-14 BEAM, SPREADER Adjustable...-4 Custom...-5 Fiberglass...-4 Fixed...-3 BEAMS, LIFTING Adjustable Hook...-1 Custom...-5
More informationForklift. Maximum visibility OF THE LOADING AREA. Compact, stable design DESPITE LIGHT CONSTRUCTION
Forklift PATENTED HYDRAULIC Fork-closing Maximum visibility OF THE LOADING AREA Compact, stable design DESPITE LIGHT CONSTRUCTION Permanent resistant THANKS TO HIGH QUALITY COMPONENTS 5 K2-D Forklift FOR
More information3. Operating instructions: Minor 200
1. Technical specifications 3. Operating instructions: Minor 200 Copyright 2015 by Endecotts Ltd. 13 1. Setting up Technical specifications SIEVE SHAKER MODEL: Minor 200 General Information The Minor 200
More informationMultiposition plate clamp. APPLICATIONS Lifting and revolving of plates, profiles, fabricated assemblies, steel frames...
Technical KS Multiposition plate clamp réf. : T 6012 GB révision: 9 date: 10/2016 APPLICATIONS Lifting and revolving of plates, profiles, fabricated assemblies, steel frames... DESCRIPTION Clamps fitted
More informationLifting Beams & Custom Engineered Lifting Devices
Lifting Beams & Engineered Lifting BASIC INFORMATION Lift-All can provide a unique engineered device for your production requirements. Our custom devices range from large capacity beams to control and
More informationCONCRETE EQUIPMENT. Surfacing
CONCRETE EQUIPMENT Surfacing SELECTION GUIDE THE QUALITY PROCESS We want your creations to last for a long time. Follow these five steps to maximize the lifetime of your concrete creations STEP 1: MASONRY
More informationHOISTING EQUIPMENT 9
HOISTING EQUIPMENT 9 Hoisting Equipment Table of contents Page Yale and Pfaff-silberblau hoisting equipment products are reliable and proven equipment renowned world-wide for applications in industry,
More informationSAM 3X USAGE AND INSTALLATION INSTRUCTIONS. USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3
UAGE AND INTALLATION INTRUCTION AM 3x3 Nothing in this manual may be copied or used by third parties without the consent of CHELDE PORT 1 UAGE AND INTALLATION INTRUCTION AM 3X3 1612070 UAGE AND INTALLATION
More informationAccumulator. High-pressure diaphragm accumulator conforming to regulations. ELM Range
Accumulator High-pressure diaphragm accumulator conforming to regulations Comparative cycle for a tractor and its accessories in working conditions Day to day, the agricultural, forestry, construction
More informationQuality Clamps you Can trust
LIFING CLAMP Quality Clamps ou Can rust errier Lifting Clamps Quality Clamps ou Can rust errier Lifting Clamps & Equipment... 4 5 ears arranty... 5 afe Lifting... 6-7 Content errier Lifting Clamps Product
More informationCLARIFICATIONS ON INTEGRAL SECUREMENT SYSTEMS FOR ROLL-ON/ROLL-OFF AND HOOK LIFT CONTAINERS
October 26, 2017 CLARIFICATIONS ON INTEGRAL SECUREMENT SYSTEMS FOR ROLL-ON/ROLL-OFF AND HOOK LIFT CONTAINERS The Cargo Securement Standards Regulation provides for requirements related to cargoes transported
More informationTESTED AND COMMERCIAL CHAIN
TETED AND COMMECIAL CHAIN 1 Beaver s in depth range of tested and coercial chain suits a variety of applications. Our diverse range covers; stainless steel, general purpose, trailer safety chain, Grade
More informationPAL. Range of steel and aluminium lifting beams for loads from 125 to 10,000 kg. Réf :
V O T I O N M O R E T N 1 5 0 Y E R S O F N D L I N G Y O O K PL Range of steel and aluminium lifting beams for loads from to 10,000 kg www.verlinde.com Réf : 06 2011 335 Technical characteristics > Fitted
More informationG43 Welded Assembly. G43 Clevis Assemblies
Chain & Assemblies 43 Chain r-43, commonly called igh Test, is manufactured to meet ASTM & NACM. Typical uses include container securement, logging, towing, and marine industry. r-43 is available in many
More informationtons Electric Powered Forklifts
www.toyota-forklifts.eu 6.0 8.5 tons Electric Powered Forklifts Toyota Traigo HT The all-new Toyota Traigo HT Safety Productivity Durability Comfort The Toyota Traigo HT counterbalanced forklift is a heavy-duty
More informationMGV25.X USER GUIDE. Ver. 3.7 INSTALLATION OPERATION AND MAINTENANCE MANUAL OF THE GEARLESS MGV25.2 MGV25.3 MGV25.5
MGV25.X USER GUIDE INSTALLATION OPERATION AND MAINTENANCE MANUAL OF THE GEARLESS MGV25.2 MGV25.3 MGV25.5 Ver. 3.7 MONTANARI GIULIO & C. S.r.l. 41100 MODENA (Italy) Via Bulgaria,39 Tel. +39 059 45.36.11
More informationLarge Enclosure Safe Handling Requirements. Do not reposition until permanently installed.
Large Enclosure Safe Handling Requirements Do not reposition until permanently installed. Tipover hazard. Enclosure can crush you resulting in serious injury or death. Read and follow precautions in the
More informationMGV25.X USER GUIDE. Ver. 3.1 INSTALLATION OPERATION AND MAINTENANCE MANUAL OF THE GEARLESS MGV25.X
MGV25.X USER GUIDE INSTALLATION OPERATION AND MAINTENANCE MANUAL OF THE GEARLESS MGV25.X Ver. 3.1 MONTANARI GIULIO & C. S.r.l. 41100 MODENA (Italy) Via Bulgaria,39 Tel. +39 059 45.36.11 Fax +39 059 31.58.90
More informationPneumatic Balancers 50 to 2000 lbs (22 to 909 kg) Capacity
The Strength Behind Material Handling Technology Meeting the needs of today s material handling applications requires an ergonomic lift assist that interacts with the operator. The Balancer offers lifting
More informationTelescopic forks Hydraulic lift truck forks Save time, space and money
Do more with pallets: Double-deep stacking One sided loading Hydraulic extensions Dual load transport Telescopic forks Hydraulic lift truck forks Save time, space and money A trademark of Meijer Special
More informationOffset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
More informationEnerpac Hydraulic Presses
Enerpac Hydraulic es Enerpac Hydraulic es are available in a variety of capacities and sizes. The press frames are designed for maximum strength and durability. Strong frames and powerful high-pressure
More informationExtended undercarriage for better stability. Compact dimensions
Micro-excavator Compactness semi-vio Variable undercarriage in height and width The SV08-1 adapts itself according to the space available, due to its variable width from 680 to 840 mm. Its height can
More informationRoughneck Mesh Slings
Roughneck Slings Roughneck WIRE MESH SLINGS Specialty Slings with Particular Properties and Uses Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or tend to cut web
More informationOpen-drive screw compressors
Catalogue index Overview Model range pecial characteristics Technical data Oil injection kit Operating limits Performance [ Hz] Dimensional drawings Pag. 2-5 Pag. 6 Pag. 7 Pag. 8 Pag. 9 Pag. 0 - Pag. 2-2
More informationCodipro Gradup Swivel Eyebolts, Rings & Shackles
odipro radup wivel yebolts, Rings & hackles What are the benefits of the radup product line? The optimization of the raw materials enable a significant improvement in the WLL: up to 11% additional WLL
More informationProduct Data SingleVario 2061
inglevario 206 50 50 50 Cutting through Grounding 4 teel pillar base 6 520 (for vehicle up to 5.00 m = 6 4 long)»540 (for vehicle up to 5.20 m long)«garage with door in front of the car parking system
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
More informationKortlänkade kättingar för lyftändamål Säkerhet Del 4: Kättingslingar. Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 The European standard has the status of a Swedish Standard. This document contains the official English version of. This
More informationLifting / Spreader Beams
Lifting / Spreader Beams Contents 1 CERTEX NORWAY AS company information 2 2 Definitions 3 3 DNV GL Type Approved Lifting Beams 4 3.1 Multi Section Beams 5 3.2 Single Section Beams 6 3.3 Shackles 7 3.4
More informationProduct Data SingleVario
Page oad plan 50 50 50 50 inglevario 206 Cutting through Grounding 4 teel pillar base 6 520 for vehicle up to 5.00 m = 6 4 long (540 for vehicle up to 5.20 m long) 50 Grounding 4 teel pillar base6 520
More informationfor CONSTRUCTION PROJECTS HOISTS & RIGGING PRODUCTS FOR CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways
A Complete Line of Products & Solutions for CONSTRUCTION PROJECTS HOISTS & RIGGING CONSTRUCTION Power Plants Commercial Construction Wind Energy Bridges & Highways TOUGH. RELIABLE. STRONG. Keeping Projects
More informationVSI, LLC SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES INSTALLATION, OPERATION AND MAINTENANCE MANUAL
VSI SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES VSI, LLC. 2-0 SERIES 2100 RESILIENT SEATED BUTTERFLY VALVES INSTALLATION, OPERATION AND MAINTENANCE MANUAL Publication: V2100- August 2016 TABLE OF CONTENTS
More informationIGLOO IGLOO EASY INSTRUCTION MANUAL
ENGLISH EASY C695 C698 INSTRUCTION MANUAL Congratulations on choosing a Clay Paky product! We thank you for your custom. Please note that this product, as all the others in the rich Clay Paky range, has
More informationBOLTING TECHNOLOGY.
BOLTING TECHNOLOGY www.cmco.eu Bolting Technology Yale bolting technology is the general term of reliable and proven equipment renowned world-wide for controlled tightening or loosening of bolted connections.
More informationTable of contents. Tigrip Load Hoisting Tackle. Tigrip Crane Weighers INFO. Page. Grabs & Clamps
TIGRIP 143 Tigrip Load Hoisting Tackle Table of contents Page Lifting clamps and attachments have a reputation for reliability, quality and safety going back more than 35 years. For transportation and
More informationMINI-EXCAVATOR. ViO57U. 5325/5395 kg. Call for Yanmar solutions
MINI-EXCAVATOR 5325/5395 kg Call for Yanmar solutions COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers.
More informationLifting tool forloadbearing sheet
www.ruukki.com Lifting tool forloadbearing sheet User manual Contents Description and intended use... 2 Ce-marking... 2 Lifting capacity... 3 Parts... 3 Load features... 4 Making the lift... 4 Preparing
More informationKEEP FOR FUTURE REFERENCE PAD FRAME T-ARM ASSEMBLIES, EXTENSION KIT AND ROCKER ARMS READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 INSTRUCTIONS International Version STOCK NUMBERS: 97463, 97464, 97465(HV)
More informationOPERATION MANUAL. SOFT TOUCH CLAMP PATENT No. 9,630,821 CONTENTS: PAGE 1 Daily Inspection Weekly Service Load Handling Techniques
OPERATION MANUAL SOFT TOUCH CLAMP PATENT No. 9,630,821 CONTENTS: PAGE 1 Daily Inspection Weekly Service Load Handling Techniques 2-3 Picking Up Product 4-5 Depositing Product 6-7 Loading / Unloading Trailers
More informationproduct selection data Performance Flexibility Intelligence Energy optimisation Acoustic optimisation Drycoolers - Air-cooled condensers 09PE
product selection data Performance Flexibility Intelligence Energy optimisation Acoustic optimisation Drycoolers - 09PE Translation of the original document N 20030, 03.2015 Use The 09PE range, available
More informationThe Caldwell Group Fax
LIFTING BEAMS 8 Lifting Beams Model 20 Low Headroom Multiple Spread Lifting Beam Ideal where headroom is limited Beams over 4 have 3 spreads (3 & 4 beams have 2 spreads). Swivel hooks with hook latches
More information201B Series Belted Portable Drum Rollers Operator s Manual for Morse Belted Portable Drum Rollers
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Options.............................
More informationHoists & Rigging Products for Construction Projects
Manual Hoists Have a special application? Our full line of material handling products allows us to create complete solutions rather than just offering single products. Now you have one point of contact
More informationLoad cell PR for maximum corrosion resistance. Load cell PR 6212 benefits. Mounting kit PR 6012 benefits
Load cell PR 6212 for maximum corrosion resistance Load cell PR 6212 benefits Maximum corrosion resistance High-temperature version available for up to 180 C Easy and failure-free installation using the
More informationA Complete Line of Paper Roll Clamps for Any Paper.
A Complete Line of Paper Roll Clamps for Any Paper. Successfully moving paper rolls through the supply chain is a team effort and the fi nal result is only as strong as the weakest link in that chain.
More informationIIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof
IIC wellglass luminaires for low energy, halogen and incandescent lamps flameproof Zone 1 & 2-21 & 22 ATEX IEC EC II2G/D IK 08 99 EEx d IIC T6-T5-T4-T3 T = 75 C to 135 C IP 66 0947 36 wellglass luminaire
More informationGeneral Operating Instructions for Load Suspension Devices
ENGLISH Translation of the Original General Operating Instructions for Load Suspension Devices Use for crane and stacker operation GRIPPERS & LIFTING CLAMPS LOAD BEAMS & CRANE BEAMS C-HOOKS & COIL HOOKS
More informationMINI-EXCAVATOR. ViO57U. 5325/5395 kg
MINI-EXCAVATOR 5325/5395 kg COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers. Rear swing radius: 975 mm
More informationMINI-BEAM SM312CV and SM312CV2
MINI-BAM M312CV and M312CV2 elf-contained DC-operated ensors Models Range Cable Compact, modulated, self-contained convergent mode sensors for 1-3V dc operation Produces a precise 1.3 mm (.5") diameter
More informationINDUSTRIAL PACKAGING. T h e v e r y e s s e n c e o f p e r f o r m a n c e RETAIL BROCHURE
INDUSTRIAL PACKAGING T h e v e r y e s s e n c e o f p e r f o r m a n c e RETAIL BROCHURE Baobag : the range for building site materials ECO CHANTIER ECO CHANTIER OMNIBAG OMNIBAG Big bags and polypropylene
More informationGyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders
Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders H A Y M A K I N G A T I T S B E S T! GF KUHN GYROTEDDERS Strong features that lead to quality tedding The rotors of all 102 and
More informationELECTRICALLY OPERATED TORQUE WRENCH (VC-RAD) USER GUIDE
ELECTRICALLY OPERATED TORQUE WRENCH (VC-RAD) USER GUIDE Ref: WCOI.055 Issue: 5 Date: June 2015 CONTENTS Page Description 1 Introduction 2 Training Requirements General Safety 3 Accessories Available VC-RAD
More informationType Type I/P & E/P Transducers
Type 1500 I/P & E/P Type 1500 Description Principle of Operation (ee Fig. 2 and 6) The T-1500 Transducer is a force balance device in which a coil is suspended in the field of a magnet by a flexure. Current
More informationPower Clamp Cylinder
Power Clamp Cylinder eries New pecial CK /M(D)UK For France CLKZ1R For Europe For North merica CKZ2N MK2T/MK2/MK C(L)KQ For sia CLK2 13 Toggle link mechanism Maintains secure and powerful support. Proximity
More informationLifting Points Rotating Ball-bearing De-centered Weldable Screw-on
ifting Points Rotating Ball-bearing De-centered Weldable Screw-on ifting Points ifting Points Information 3:2 Rotating Eye ifting Point - REP 3:4 Rotating ifting Point - RP 3:5 Decentered ifting Point
More informationHOISTS RATCHET LEVER HOISTS
Yale HOISTS RATCHET LEVER HOISTS Yale PE & RS Ratchet Lever Hoist / to ton capacities Link chain models Light and portable Weatherized load brake Requires less handle pull to lift full load Efficient Yale
More informationCare, Use & Inspection
Care, Use & Inspection The life and strength of erc-alloy 1000 chain slings depend on proper inspection, maintenance and use. For additional information, refer to ASE 30.9 and OSA 1910.184. Care Chain
More informationMINI-EXCAVATOR. ViO38U. 3750/3965 kg. Call for Yanmar solutions
MINI-EXCAVATOR 3750/3965 kg Call for Yanmar solutions COMPACTNESS The is a true Zero Tail Swing machine: neither the counterweight nor the front part of the upper frame exceed the width of the crawlers.
More informationShenghua Heavy Crane Group
Technical Description Gantry Crane Contents Single Girder Gantr y Crane 3 Double Girder Gantr y Crane 4 L Type Single Girder Gantry Crane 6 Truss Type Gantry Crane 8 Gantr y Crane for Highway Construction
More informationYale HOISTS. 414 West Broadway Ave. P.O. Box 769 Muskegon, MI PH: FX:
Yale HOISTS! To Avoid Injury: Do not exceed working load limit, load rating, or capacity. Do not use to lift people or loads over people. Read and follow all instructions. 44 West Broadway Ave. P.O. Box
More informationLifting Gear Hire Jacking
Lifting Gear Hire Jacking All rental equipment is available throughout North America. For specific product information, refer to the group of equipment within this section s overview on the following page
More informationTelescopic forks Hydraulic lift truck forks Save time, space and money
Do more with pallets: Double-deep stacking One sided loading Hydraulic extensions Dual load transport Telescopic forks Hydraulic lift truck forks Save time, space and money Innovative Logistic Products
More informationNew Machinery Directive
New Machinery Directive Machinery Directive 2006/42/EC Member States to adopt and Publish 29 th June 2008 Directive applies in full 29 th December 2009 This Directive now looks at the lifecycle of the
More informationThe new benchmark for perfection in concrete paving. Slipform Paver SP 64 i
The new benchmark for perfection in concrete paving. Slipform Paver SP 64 i 02 03 At a glance: outstanding features of the new SP 64 i Highlights in concrete paving 1 EXCEPTIONAL FLEXIBILITY IN CONCRETE
More informationData sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
More informationHusky Ladder Flange Out
CABLE TRAY Husky Ladder Flange Out In Aluminum, teel election Tables Pg. 29 Numbering ystem Pg. 30 Loading Tables Pgs. 31-35 The upper flange may have an extruded lip, a bent lip, or no lip at all depending
More informationSwitching DC Power Supply
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Model 1693, 1694 Switching DC Power Supply INSTRUCTION MANUAL 1 Safety Summary
More informationVSI INDUSTRIAL BALL VALVES SERIES 7100 SERIES 8100 SERIES 7200 SERIES 8300 SERIES 7400 SERIES 8400 SERIES 8000 SERIES 8500
VSI INDUSTRIAL BALL BUTTERFLY VALVES VSI INDUSTRIAL BALL VALVES SERIES 7100 SERIES 8100 SERIES 7200 SERIES 8300 SERIES 7400 SERIES 8400 SERIES 8000 SERIES 8500 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
More informationLarge autonomy Safety Ease of handling Silent. 18,0/14,4 20,0/16,0 Yanmar 4TNE88PG. 18,5/14,8 19,6/15,7 Deutz F3M 1011 F
ERIE PL2 00 PW 50 PL0 PW50: Rental Energy This range of generators is suitable for any application. They have all the features associated with Powerources Generators; low noise, security, greatly extended
More informationVALSTAR VALVE. The triple offset - metal Seated high-performance butterfly valve
. VALTAR. VALVE The triple offset - metal eated high-performance butterfly valve 3rd Offset 2nd Offset VALTAR VALVE KEY INFORMATION High performance levels in Control or On/Off service pecific shape of
More informationUSER MANUAL Lifting tool for load-bearing sheet.
USER MANUAL Lifting tool for load-bearing sheet www.ruukki.com Contents DESCRIPTION AND INTENDED USE 3 CE-MARKING 3 LIFTING CAPACITY 4 PARTS 4 LOAD FEATURES 6 MAKING THE LIFT 6 PREPARING A LIFT 7 LIFTING
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationOperator s Manual. GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK
Double Quick Operator s Manual GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK Certificate of CE Conformity Date: 10 February 2003 Machine Model: Description: Double-Quick Interchangeable Turf Maintenance
More informationInstruction Manual Crane Fork NOTE:
Instruction Manual Crane Fork NOTE: OWNER/OPERATER MUST READ AND UNDERSTAND THIS INSTRUCTION MAMUAL BEFORE USING IT. - 0 - 1. GENERAL This manual contains important information for the correct installation,
More informationPressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
More informationDrilling & Down-hole Completion Tools
HYDRAULIC SET PRODUCTION PACKER MODEL: WC-HP-1 & WC-HPL-1[Large Bore] PRODUCT No.: WC-20101 & WC-20112 HP-1 is an industry standard, fully hydrostatic, hydraulic set and shear release single string retrievable
More informationEC Declaration of Conformity, EC DoC. ew Graze QLX Powercore ew Graze EC Powercore ecolor Graze QLX Powercore. ecolor Graze EC Powercore
Declaration of Conformity Philips Color Kinetics 3 Burlington Woods Drive Burlington, MA 01803, USA Year in which CE Mark was first affixed: 2012 Declare responsibility for the product(s): Product Range:
More informationIf You Can Produce It, We Can Move It. Custom engineered products for safe, reliable and efficient material handling.
MATERIAL HANDLING AND FABRICATED PRODUCTS If You Can Produce It, We Can Move It. Custom engineered products for safe, reliable and efficient material handling. Avon Engineering is recognized as a leader
More informationEasy Slope Aluminium Folding Leader Steps. Kick Steps. Folding Steps with Foam Handle STEPS. Steps which are ideal for those hard to reach areas.
Best for Office, Storeroom or Workshop Kick Steps «Available as a standard version or as a model which is manufactured and approved to the recognised European GS standard «Manufactured from quality steel
More informationInstruction Manual. Pressure Manhole Covers - HLSD IM70871-EN
Instruction Manual Pressure Manhole Covers - HLSD IM70871-EN1 2006-03 Declaration of Conformity The designating company Alfa Laval Company Name Albuen 31, DK-6000 Kolding, Denmark Address +45 79 32 22
More informationPrevaLED Linear HV Ideal alternative to linear fluorescent lamp source Basic description
www.osram.com/prevaled-linear PrevaLED Linear HV Ideal alternative to linear fluorescent lamp source Basic description PrevaLED Linear Value HV series offers innovative solutions for a variety of general
More informationElectropneumatic Converters i/p Converters Type 6111 Mounting and Operating Instructions EB 6111 EN
Electropneumatic Converters i/p Converters Type 6111 Fig. 1 Type 6111 in standard version Fig. Type 6111 mounted on a supply air manifold Fig. 3 Type 6111 in field enclosure Mounting and Operating Instructions
More informationSpider Shelving System
Spider Shelving System SHELVING INDEX SYSTEM THE MOST VERSATILE THAT EXISTS Much more than a simple shelving unit! Sturdy construction and quick assembly, the Spider shelving system meets all of your storage
More informationA GUIDE TO PERMANENT MAGNETS FOR LIFTING PURPOSES
A GUIDE TO PERMANENT MAGNETS FOR LIFTING PURPOSES Benefits Safe use Types Applications Manufacturers Contact: Tel: 0845 270 2919 - INT: 00 44 161 223 1990 - Email: sales@dale-lifting.co.uk - Web: www.dlhonline.co.uk
More informationPIPE HANDLING & HOISTING. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
PIPE HANDLING & HOISTING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com PIPE HANDLING & HOISTING TABLE OF CONTENTS PIPE HANDLING & HOISTING OVERVIEW... HOISTING PLUGS...-7
More informationC-Lube Linear Way MUL Linear Way U
C-Lube Linear Way Linear Way U 133 134 Aquamarine endplate for identification of C-Lube Linear Way Identifi cation number and specifi cation The specification of C-Lube Linear Way is indicated by the identification
More informationInformation brochure Kran Mobil PK 34
Information brochure Kran Mobil PK 34 For maintenance of assembly lines and production lines Zunhammer GmbH Biebing 19 D-83301 Traunreut Tel. 08669/8788-0 Fax 8788-33 www.kran-mobil.de info@kran-mobil.de
More informationP APER ROLL DAMAGE REDUCTION. Deliver a perfect roll every time
P APER ROLL DAMAGE REDUCTION Deliver a perfect roll every time Roll Damage: An all too familiar problem SOLVE TORN LAYERS AND SCUFFING WITH: Adjustable Bumper Application-Specific Pads Drop-Stop Valve
More informationData sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
More informationBalancers The strength behind Ingersoll Rand ergonomic handling
Distributed by Ergonomic Partners, Inc. sales@ergonomicpartners.com 314-884-8884 www.ergonomicpartners.com Balancers The strength behind Ingersoll Rand ergonomic handling Ingersoll Rand offers: Pneumatic
More informationTM-CAGE OWNERS MANUAL
TM-CAGE OWNERS MANUAL 1 www.visionaudiovisual.com/techmount/tm-cage 2 DECLARATION OF CONFORMITY Where applicable Vision products are certified and comply with all known local regulations to a CB Certification
More informationDisclaimer: This brochure is for information only. The manufacturer reserves the right to modify specifications.
USER MANUAL 2 3 Table of contents 4-5 6 7 8 9 10 11 12 Safety recommendations elebia autohook system / Installation Main features Specifications / Regulatory standards elebia remote control / Working modes
More informationPHARMACEUTICAL ENGINEERING LIFT SOLUTIONS
PHARMACEUTICAL ENGINEERING LIFT SOLUTIONS www.superlift.net www.sanitarylifts.com sales@superlift.net STAINLESS STEEL LIFT TRUCKS Superlift stainless steel trucks are designed to meet the specific requirements
More informationRAIL MATERIAL HANDLING TONGS RAIL IPS 40 TONGS FROG LIFTING IPS 43
INDEX 40 51 TONGS RAIL IPS 40 THREADING TONGS & SPREADER BARS RAIL IPS 42 TONGS FROG LIFTING IPS 43 TONGS SLEEPER/TIMBER IPS 44 PULLER & TUGGER RAIL IPS 45 THREADER BALL & RAIL IPS 46 RUNNER & THREADER
More informationPh: Camlok. Lifting Clamps. Made in Britain - Safely used throughout the world.
Ph: 02 9631 8833 camlok@lbwireropes.com.au Camlok Made in Britain - Safely used throughout the world www.camlok.com.au Product Page Vertical Plate Clamps: Why a Camlok: The Advantages Explained 3 92 Series
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More informationSERVICE MANUAL
SERVICE MANUAL 2017-02 DECLARATION OF CONFORMITY The manufacturer Neatech.it Via A. de Curtis 4/A, 80040, Cercola (NA), Italy declares that the cushion Peezy (reference code: S211) satisfies the requirements
More information