intmpe International Mineral Processing Equipment A Division of Canamera Enterprises Inc.
|
|
- Noel Manning
- 5 years ago
- Views:
Transcription
1 intmpe International Mineral Processing Equipment A Division of Canamera Enterprises Inc.
2 Type series booklet intmpe MPKWP NONCLOG PUMP Fields of Application For handling all kinds of pulps not liable to plait, as well as stock suspensions up to 5 % bone dry. This pump is used in the chemical and process engineering industries, paper and pulp industries, sugar, food and beverages industries, in flue gas desulphurisation and coal upgrading and in the treatment of industrial effluents. Design Horizontal, radially split volute casing pump in back pullout design, with impeller adapted to meet application requirements, singleflow, singlestage. Vertical mounting "L" optional. Special Features Reinforced, aially adjustable bearing assembly on all pumps Shaft seal: mechanical seal integrated into the casing cover, or gland packing Even cast iron pumps are supplied with pump internals (impeller and wear plate) made of wearresistant ERN (nickel cast iron) Certification Certified quality management ISO 900. Materials Part No Description Pump casing Wear plate, suction side Suction cover Discharge cover Shaft Impeller Bearing bracket Bearing bracket lantern Stuffing bo housing Shaft protecting sleeve (packing) Shaft protecting sleeve (mech. seal) Impeller screw GJL50 to EN 5 ) without auiliary connection holes (pressure gauge connection and casing drain) ) together with NORIHARD discharge cover Designation Type series Impeller type Discharge nozzle DN Nominal impeller dia. Impeller types: K = channeltype impeller O = open multivane impeller F = freeflow impeller Operating Data KWP K Standard sizes Supplementary sizes Pump sizes DN up to 50 up to 0 Capacity Q up to m /h 000 m /h Head H up to 00 m m Operating pressure p up to 0 bar Operating temperature t for H from 0 to +0 C for GN, GH, GC from 0 to +00 C for C from to + C Material variant GN C GC H GH JL0 Noridur.59 JL0 Norihard ) JL0 ERN Noridur.59 ERN Norihard Norihard JL0 Noridur.59 JL0 Norihard Norihard JL0 Noridur.59 JL0 Norihard Norihard C5+N C5+N C5+N C5+N C5+N ERN Noridur.59 Noridur.59 Norihard Norihard JL0 JL0 JL0 JL0 JL0 JL0 JL0 JL0 JL0 JL0 Noridur.59 JL0 JL0 ) JL0 ). HV.5. HV. HV. HV C+N Noridur.59 C+N C+N C+N
3 K intmpe NON CLOG SLUDGE PUMPS n = /min 5
4 intmpe NONCLOG PUMPS BaureiheGröße TypeSize Modèle Tipo Serie Tipo 50MPKWPK0 Nenndrehzahl Nom. speed Vitesse nom. Velocità di rotazione nom. Nominaal toerental Revolutiones nom. /min Laufradø Impeller Dia. Diamètre de roue ø Girante ø Waaier ø Rodete Projekt Project Projet Progetto Projekt Proyecto AngebotsNr. Project No. No. de l'offre OffertaNo. Offertenr. OffertaNo. Pos.Nr. Item No. No. de pos. Pos.Nr. Positienr. Pos.Nr US.gpm IM.gpm 00 Förderhöhe TDH Hauteur Prevalenza Opvoerhoogte Altura 00 m Qmin Qma η [%] 8 ø 8 ø550 ø ø0 ft m /h l/s 5 0 NPSH R 5 m ft ø0 0 Leistungsbedarf Power Input Puiss. abs. Potenza ass. Opgenomen vermogen Potencia nec. kw 00 ø ø550 ø590 hp m /h Förderstrom/Flow/Débit/Portata/Capaciteit/Caudal K7/ 0 Laufradaustrittsbreite/Impeller outlet width/largeur à la sortie de la roue Luce della girante/waaier uittredebreedte/anchura de salida rodete 8 00 mm 8 00 mm 70
5 K intmpe NON CLOG SLUDGE PUMPS n = 0 /min
6 Design Features Flange design in accordance with DIN/EN up to PN ; other flange designs are possible. Shaft not in contact with the medium handled (dry shaft); therefore no special materials required. Back vanes for reduced aial thrust and shaft seal balancing. All mechanical seals integrated in the casing cover with conical seal chamber (Atype cover), therefore improved internal circulation, automatic venting and deadend operation possible. Rotor and bearings are dimensioned for a shaft deflection at the shaft seal below 0.05 mm and a bearing life of more than 7 operating hours. On request, pump casing is available with inspection hole. Reinforced adjustable bearing assembly. Safe design of all pressureretaining components due to quality casting with corrosion/wear allowance. High efficiencies in the case of channeltype impeller design; impeller with front vanes and diagonal gap. Pump casing with suctionside wear plate in wearresistant diagonal gap design. Due to the back pullout design, the casing may remain in the pipeline when the pump is dismantled. Rigid and stable support foot ensures that even in the case of high eternal forces the shaft is only slightly displaced in the coupling area. Pump version with gland packing and special discharge cover. Jacking screws facilitate dismantling. Use of eisting modular design components ensures small stock of spare parts and fast delivery. Cylindrical roller bearing as movable bearing permits easy assembly and compensates possible thermal epansion of the shaft. Constantlevel oiler ensures constant lubrication of the bearings.
7 intmpe MPKWP NON CLOG SLUDGE HANDLING PUMPS. SUCTION PLATE. VOLUTE CASING. IMPELLER. HUB SIDE PLATE 5. SHAFT. STUFFING BOX 7. BEARING HOUSING 8. SUCTION ELBOW 9. BEARING 0. PACKING SYSTEM
8 Technical Data Standard Pump Sizes Unit Pump sizes Bearing bracket P0a P0a P05a P0 Impeller K Impeller outlet width mm Ma. impeller dia. mm Min. impeller dia. mm Impeller O Impeller outlet width mm Ma. impeller dia. mm Min. impeller dia. mm Impeller F Free impeller passage mm Ma. impeller dia. mm Min. impeller dia. mm Shaft dia. in stuffing bo housing mm 5 5 at bearings pump side mm motor side mm at coupling mm Shaft Packing mm protect. sleeve Mechanical seal mm depending on make Bearings pump side NU 9 NU NU NU motor side 709 BG 7BG 7 BG 7 BG Gland Bore dia. mm Length mm Packing ring dimensions mm ,5,5,5,5 Number of packing rings pcs. Lantern ring width mm Clearance for removal mm 5 Pressure limits Ma. operating pressure bar see operating data Ma. test pressure bar.5 times the ma. admissible operating pressure, min. bar Temp. limits Ma. temperature of medium handled C see operating data Drive P/n value (shaft C 5 N)
9 Supplementary Sizes Unit Pump sizes Bearing bracket P 08s / P 0a / P s P 0a / P s / P a P a / P 0s Impeller K Impeller outlet width mm Ma. impeller dia. mm Min. impeller dia. mm Shaft dia. in stuffing bo housing mm P 08s: ; P 0a: 00; P s: 0; P a: 58; P 0s: 98 at bearings pump side mm P 08s: ; P 0a: 0; P s: 0; P a: ; P 0s: 00 motor side mm P 08s: 95; P 0a: 0; P s: 0; P a: /; P 0s: 00/90 at coupling mm P 08s: ; P 0a: 95; P s: 0; P a: 0; P 0s: 5 Shaft Packing mm P 08s: 00; P 0a: 0; P s: ; P a: 70; P 0s: protect. sleeve Mechanical seal mm depending on make Bearings pump side P 08s: NU ; P 0a: NU ; P s: NU ; P a: NU ; P 0s: NU motor side P 08s: 7 BG; P 0a: 7 BG; P s: 7 BG; P a: NU /QJ 8; P 0s: 9/NU 8 Gland Bore dia. mm P 08s: 0; P 0a: 0; P s: 0; P a: 0; P 0s: Length mm P 08s: ; P 0a: 5; P s: 7; P a: 0; P 0s: Packing ring dimensions mm P 08s: ; P 0a: ; P s: ; P a: 0 0; P 0s: Number of packing rings pcs. Lantern ring width mm P 08s: 0; P 0a: 0; P s: 0; P a: 5; P 0s: Clearance for removal mm P 08s: 05; P 0a: 05; P s: 05; P a: 5; P 0s: P 0a: 0; P s: 0; P a: 5 P a: 5; P 0s: Pressure limits Ma. operating pressure bar see operating data Ma. test pressure bar.5 times the ma. admissible operating pressure, min. bar Temp. limits Ma. temperature of medium handled C see operating data Drive P/n value (shaft C 5 N) P 08s: 0.58; P 0a: 0.9; P s:.; P a:.0; P 0s: Data on request.
10 Pump Sizes Dis charge nozzle /0 50/5/5 5/ /0 Nominal impeller dia. / /50/ 50 50/505 Impeller type / /5 7 70/ K F O K F O K F O K O K K K K K K K K K Flanges Suction flanges up to DN are supplied with pocket holes for he. head bolts to DIN 50, PN 0/; suction flanges DN and above with throughholes to EN 09, PN0. The discharge flange of sizes DN to 50 is supplied in acc. with EN 09, PN (with throughholes), sizes DN 00 and above are supplied with flanges acc. to EN 09, PN 0. Casing Radially split, consisting of pump casing with integrally castsuction and discharge nozzle as well as discharge cover. The discharge cover is available with integrally cast stuffing bo housing or with bolted coolable stuffing bo housing. The pump casing is available with or without wear plate. From pump size 70 onwards the suction nozzle is integrally cast on a separate suction cover. Gland packing: Gland packing Standard version Mechanical seal A version (without springloaded ring cover), no eternalflushing required Discharge cover Discharge cover with integrally cast with bolted coolable stuffing bo housing stuffing bo housing (casing design ) (casing design ) Material variants: GN,GC,C Material variants: GH, H singleacting, unbalanced Mechanical seal: Discharge cover with conical seal chamber (Atype cover) Material variants: GN, GC,C,GH,H Shaft Seal Singleacting mechanical seal in conical seal chamber, therefore improved internal circulation; automatic venting and deadend operation possible. Gland packing variant available with barrier liquid /flushing liquid connection. singleacting, unbalanced version with quench feed and additional singleacting mechanical seal (tandem arrangement) 7
11 Acceptance Tests / Guarantees Each pump is subjected to a functional test, and its duty point is guaranteed according to ISO 990/A. The following acceptance tests may be performed and certified at etra charge: Performance test ISO 990/A: measuring point / 5 measuring points Performance test ISO 990/: 5 measuring points (refer to individual performance curve) NPSH test measuring point / 5 measuring points If Q < 0. Q opt, measuring the NPSH value is difficult, and the NPSH value cannot be certified. The value given in the individual performance curves can be fully used, however. singleacting, balanced, stationary Coating and Preservation acc. to KSB standard AN 5 KWP (GN, GH, GC,H) KWP (C ) Treatment of unmachined parts Coating wetted parts Coating baseplate and bearing bracket Coating motor Preservation RW N0U singleacting, balanced, stationary version with quench feed and additional singleacting mechanical seal (tandem arrangement) N = reaction primer, wetted parts without last coating (internal and eternal) R = reaction primer = synthetic enamel RAL, ultramarine blue 0 = without top coat W = rinsed with water repellent, bright parts made of materials liable to rust with protective coating U = untreated, bright parts made of materials liable to rust with protective coating Recommended Spare Parts Stock for Years Operation Part No. Description Number of pumps (including standby pumps) and more / if fitted Wear plate, suction side Shaft with small parts Impeller Rolling element bearings (set) Bearing bracket, complete Springloaded ring Seat ring Secondary seal rings Spring Neck bush Lantern ring Set of gaskets or Orings Gland packing ( rings) Shaft protecting sleeve % 0 % 0 % 5 % pieces 90 % 90 % 00 % 0 % 0 % 0 % 50 % 00 % 50 % 8
12 Dimensions Pump sizes on bearing brackets P0 to P0 a f r DN l h DN i w v h g g :5 Pump size 505 b i = back pullout clearance (without removing the motor) n n m m s n n u t Shaft end and key to DIN 885/p. s m d Pump size Bearing bracket Pump dimensions Shaft end Foot dimensions DN DN a b f g g h h m m n n r d l t u i i m n n s s v w 50 5 P 0a P 0a , 0 5, , ,0 50 P 0a P 0a , 0 5, ,0 55,, 5 P 0a P 0a P 0a , 5, 5, , ,5 5,, P 0a P 0a P 05a P , 5, 5,5, ,5, , P 0a P 0a P 05a , 5, 5, ,50 P , , 50 P 05a P 05a ,5 0 5, , P 05a P ,5, P ,
13 Dimensions Pump sizes on bearing brackets P08s to P0s a f r DN l h DN i w v h g g :5a Pump size 0050 Pump size 50 and above = Back pullout clearance (without removing the motor) b i u n n 5 n n m m s n n t Shaft end and key to DIN 885/p. s m d Pump size Bearing bracket Pump dimensions Foot dimensions DN DN a b g g h h m m n n r i i m n n n 5 s s 00,50,50 P08s/0a/s , P08s/0a 50,50,505 P08s/0a/s 500, P08s/0a/s ,50 P08s/0a P08s/0a/s P08s/0a,50,50 P08s/0a/s 0, P08s/0a/s , ,7 P08s/0a/s P0a/s P0a/s P0a/s/a P0a/s 0,, P0a/s/a 5,7 P0a/s/a 070 Ps/a 0,8,8 P a/p 0s P 0s Dimensions on request 0
14 Dimensions Pump sizes on bearing brackets P08s to P0s Pump size Pump dimensions Foot dimensions f v w P08s P0a Ps Pa P0s P08s P0a Ps Pa P0s P08s P0a Ps Pa P0s 00,50, , 50,50, ,,50,50,50 0,, ,7 5 0,, 5, ,8, On request Shaft end Bearing bracket d l t u P 08s P 0a P s P a P 0s
15 General Drawing with List of Components Pumps on bearing brackets P 0 a to P 0 Cooled gland
16 When ordering spare parts please always specify the type series/pump size, works No. (stamped on the name plate and on the suction nozzle flange), motor No. (serial No.), year of construction, quantity required, part No., description, material, medium handled, drawing no. and mode of dispatch. Part No. Description Scope of supply 0 Pump casing with joint ring.0 /.0 /.0 /.0, he. head bolt 90.0, stud 90.0, screwed plug 90.0 /.0 /.0, he. nut ) Wear plate (suctionside) with joint ring., Oring.05/., he. head bolt 90.0, socket head cap screw 9.05 ) Discharge cover (Acover) with he. head bolt 90. ) Discharge cover (with with joint ring./.7, drip plate.0, disc 550.0, stud 90.0, screwed plug 90./.7, he. nut 90.0 integrally cast stuffing bo housing) Support foot with socket head cap screw 9.0, spring washer Shaft with keywayed nut 90., lockwasher 9.0, key 9.0/.0 0 Impeller with Oring Angular contact ball bearing.0 Cylindrical roller bearing 0 Bearing bracket 0 Bearing bracket (complete) with bearing cover.0, bearing carrier 8, gasket.0, joint ring., Oring.0, radial shaft seal ring.0/.0, support disc 550., constantlevel oiler 8, vent plug 7, screwed plug 90., grub screw 90.0, socket head cap screw 9.0/.0, circlip 9.0/.0 Bearing bracket lantern with forcing screw 90., stud 90.0, he. nut Bearing cover with gasket.0, socket head cap screw Bearing carrier with Oring.0, grub screw 90.0, socket head cap screw 9.0, circlip 9.0.0/.0 Radial shaft seal ring 5.0 Stuffing bo housing with gasket.05, joint ring./.7/./.9/., drip plate.0, disc 550.0, stud 90.0, screwed plug 90./.7/./.9, he. nut Gland cover 5.0 Stuffing bo ring, split 5.0 Neck bush 58.0 Lantern ring, split.0 Gland packing 50.0 ) Casing wear ring Thrower 5.0 Shaft protecting sleeve with Oring.0 90 Impeller screw with Oring Set of sealing elements with gasket.0/.0/.0/.0, joint ring.0/.0/.0/.0/././., Oring.0/.0/.05 if fitted ) on pumps with mechanical seal ) material variants GN, GN,GC,C with packing ) on 505 casing wear ring 50.0 instead of wear plate
17 Pumps on Bearing Brackets P 08s, P 0a and P s Cooled gland
18 When ordering spare parts please always specify the type series/pump size, works No. (stamped on the name plate and on the suction nozzle flange), motor No. (serial No.), year of construction, quantity required, part No., description, material, medium handled, drawing No. and mode of dispatch. Part No. Description Scope of supply 0 Pump casing with joint ring.0 /.0 /.0 /.0, he. head bolt 90.0, stud 90.0, screwed plug 90.0 /.0 /.0, he. nut ) Wear plate (suctionside) with joint ring./., Oring.05/., he. head bolt 90.0, socket head cap screw 9.05 ) Discharge cover (Acover) with he. head bolt 90. Discharge cover (with with joint ring./.7, drip plate.0, disc 550.0, stud 90.0, screwed plug 90./.7, he. nut 90.0 integrally cast stuffing bo housing) Support foot with shim 89.0, he. head bolt 90.0, spring washer Shaft with ring., keywayed nut 90., lockwasher 9.0, key 9.0/.0 0 Impeller with Oring.0.0 Impeller cap with Oring.0, disc , he. head bolt 90.87, lockwasher Angular contact ball bearing.0 Cylindrical roller bearing 0 Bearing bracket 0 Bearing bracket (complete) with bearing cover.0, gasket.0, joint ring./.77/.78, support disc 550., constantlevel oiler 8, vent plug 7, he. head bolt 90.9/.95, screwed plug 90., socket head cap screw 9.0, circlip 9.0/.0 Bearing bracket lantern with he. head bolt 90., forcing screw 90., stud 90.0, he. nut Bearing cover with gasket.0, Oring., disc 507., socket head cap screw Bearing carrier with Oring.0, grub screw 90.0, he. head bolt 90.95, circlip /.78 Vring 5.0 Stuffing bo housing with gasket.05, joint ring./.7/./.9/., drip plate.0, disc 550.0, stud 90.0, screwed plug 90./.7/./.9, he. nut Gland cover 5.0 Stuffing bo ring, split 5.0 Neck bush 58.0 Lantern ring, split.0 Gland packing 50.0 Casing wear ring ) Thrower 5.0 Shaft protecting sleeve with Oring Set of sealing elements with gasket.0/.0/., joint ring.0/.0/.0/././., Oring.0/.0/.05/.0 if fitted ) on and casing wear ring instead of wear plate ) on pumps with mechanical seal 5
19 Pumps on bearing bracket P s Suction cover part no. Pumps on bearing bracket P 0 s Suction cover part no. Tel Fa
KWP non-clogging centrifugal pump. Designation
Type series booklet.5/80 G KWP KWP nonclogging centrifugal pump Automation products available: PumpEpert Hyamaster hyatronic Fields of Application For handling all kinds of pulps not liable to plait, as
More informationChemical pump with plastic liner in close-coupled design
Type series booklet 793.5/40 G3 TyachemBloc Chemical pump with plastic liner in closecoupled design Fields of Application TyachemBloc pumps are used for handling highly aggressive, corrosive and abrasive
More informationHeat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet
Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationProcess Pump RPH. Type Series Booklet
Process Pump RPH Type Series Booklet Legal information/copyright Type Series Booklet RPH All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationVERTICAL MULTISTAGE PUMPS HIL AND HILFLEX SEE OUR FLEXDRIVE LEAFLET FOR DRIVE DETAILS. reliable efficient quality. Pumping Technology
TM VERTICAL MULTISTAGE PUMPS HIL AND HILFLEX SEE OUR FLEXDRIVE LEAFLET FOR DRIVE DETAILS reliable efficient quality HIL Vertical Multistage Pumps Introduction Smedegaards' range of HIL vertical multistage
More informationAxially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationPN 16 Volute Centrifugal Pumps (depending on materials up to PN 25) according to EN 22858/ISO 2858 and EN ISO 5199
PN 16 Volute Centrifugal Pumps (depending on materials up to PN 25) according to EN 22858/ISO 2858 and EN ISO 5199 Utilization Used to pump non-aggressive or aggressive liquids, cold or hot liquids, clean
More informationEtanorm SYT Type Series Booklet
Thermal Oil / Hot Water Pump Etanorm SYT Type Series Booklet Legal information/copyright Type Series Booklet Etanorm SYT All rights reserved. The contents provided herein must neither be distributed, copied,
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationRWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
More informationAmacan K. Submersible motor pump for installation in discharge tubes with channel-type impeller. Applications. Bearings. Material.
Type series booklet 1579.5/4-- Amacan K Submersible motor pump for installation in discharge tubes with channel-type impeller Hz Standard range Other versions on request Automation products available:
More informationBearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationMegaCPK Type Series Booklet
Standardised Chemical Pump MegaCPK Type Series Booklet Legal information/copyright Type Series Booklet MegaCPK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationNon-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: up to 3600 rpm depending of the pump size and material execution Medium temperature: max. 110
More informationBoiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
More informationRDLO / RDLO V Type Series Booklet
RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More informationRDLO / RDLO V Type Series Booklet
RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More informationMZ, MA. Liquid ring pumps. 3 Design. 1 Fields of application. 4 Designation. 5 Materials. 2 Operating Data
Type series booklet CTI-1700/00 [12-2008] MZ, MA Liquid ring pumps 1 Fields of application Multi-stage, horizontal liquid ring pumps, with self-priming capacity. MZ and MA pumps are used for pumping of
More informationRDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
More informationAmaline Submersible motor recirculation pump with ECB propeller 50 Hz Applications Designation Amaline P / 74 UM G Pump design
Type series booklet 1594.5/8--EN Amaline Submersible motor recirculation pump with ECB propeller Hz Applications Recirculation of activated sludge from nitrification stages into denitrification stages
More informationNon-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationVolute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:
Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationKSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709
Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.
More informationMag-drive Pump. Magnochem-Bloc. Type Series Booklet
Mag-drive Pump Magnochem-Bloc Type Series Booklet Legal information/copyright Type Series Booklet Magnochem-Bloc All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationCombiNorm. Centrifugal pump according to EN 733 (DIN 24255)
CombiNorm Centrifugal pump according to EN 733 (DIN 242) The SPX FLOW Johnson Pump Combi system is a modular programme of single stage centrifugal pumps with a high degree of interchangeability of parts
More informationVolute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
More informationINVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationCombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 5199 and ISO 858 / EN 858 (DIN 456) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal
More informationAma Porter. 50 Hz. Submersible motor pumps
Type series booklet 2539.51 10 Ama Porter Submersible motor pumps 50 Hz Fields of Application Pumping of waste water containing solid matter or domestic sewage such as waste from toilets, washing machines,
More informationILN, ILNC. In Line vertical pumps. ILN single suction ILN double suction ILNC. 1. Fields of Application. 3. Design. 4. Designation. 2.
Type series booklet CTI-2600/04 [04-2017] ILN, ILNC In Line vertical pumps ILN single suction ILN double suction ILNC sizes 65/ to 250/... sizes 300/ all sizes 1. Fields of Application Suitable for a wide
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationVolute Casing Pumps LSN. according to iso 2828 / ISO 5199
Volute Casing Pumps LSN according to iso 2828 / ISO 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationJansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
More informationBEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationSIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
More informationHTM Circulation Pumps acc. to DIN EN 733 Type NKLs
HTM Circulation Pumps acc. to DIN EN 733 Type NKLs General The DICKOW standard HTM pumps, series NKLs according to EN 733, are designed as centrifugal pumps of light duty for handling heat transfer media.
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationChemical Motor Pump Unit BN
MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.
More informationData sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design
Data sheet Page: 1 / 7 Operating data Requested flow rate Requested developed head Pumped medium Ambient air temperature 20.0 C Fluid temperature 20.0 C Fluid density 998 kg/m³ Water Clean water Not containing
More informationVogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN
Vogel - Volute Casing Pumps according to ISO 2828 / ISO 5199 Design LSN 1 Volute Casing Pumps - Design LSN - according ISO 2858 / ISO 5199 Performance Capacity up to 450 m 3 /h (1980 USgpm) Head up to
More informationSubmersible motor pumps DN 50 to Hz
Type Series Booklet 2563.5/6-10 Amarex N Submersible motor pumps DN to 100 Hz Fields of Application Amarex N pumps are used for handling all types of waste water, e.g.: waste water / sewage, waste water
More informationVOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps
VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet)
More informationANSI Centrifugal Process Pumps. 911 Series
ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition
More informationBlockpumps. Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858
Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: Capacity up to 450m 3 /h (1540USgpm) Head up to 150m (280feet) Speed up to 2950/3550rpm Pump Sizes: DN 25 up
More informationCSO/CP Series. Alloys to suit all applications. Proud Manufacturers of SAMCO Pumps
CSO/CP Series SAM Engineering (Pty) Ltd. 2 Duncan Road, Lilianton, Boksburg, South Africa Tel: +27 (0) 23 Fax: +27 (0) 2393 Email: pumps@sameng.co.za www.sameng.co.za Alloys to suit all applications Proud
More informationWaste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,
More informationEtaprime B Type Series Booklet
Self-priming Pump Etaprime B Type Series Booklet Legal information/copyright Type Series Booklet Etaprime B All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationSelf-priming Pump. Etaprime B. Type Series Booklet
Self-priming Pump Etaprime B Type Series Booklet Legal information/copyright Type Series Booklet Etaprime B All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationRC, RCV. Helical gear pumps. 3. Design. 1. Fields of Application. 2. Operating Data. 4. Designation
Type series booklet CTI-2300/01 [02-2012] RC, RCV Helical gear pumps 1. Fields of Application RC pumps are used for pumping viscous and with lubricating properties liquids without solids in applications
More informationZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
More informationRDL O SPLIT CASE CENTRIFUGAL PUMPS
RDL O SPLIT CASE I05KSB002 Industrial / Commercial / Food Processing / Beverage / Chemical / Pharmaceutical / Water Treatment / Automotive / Oil & Gas Horizontally or vertically installed, single-stage,
More informationCRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationHORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
More informationSIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
More informationVolute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML
Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationVolute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive. Series CNH-M
Volute Casing Centrifugal Pumps according to EN 22858, ISO 2858 with Magnetic Drive Series CNH-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service
More informationCPS. Horizontal Split Case Centrifugal Pump
CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water
More informationES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS
ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS Conforms to ISO 2858 Conforms to ISO 5199 Optimized for capacity Efficiency as per Hydraulic Institute & Europump Norms Many product variants -
More informationSubmersible motor pumps DN Hz
Type series booklet 2563.51/3-10 Amarex NS32 Submersible motor pumps DN 32 50 Hz Applications Amarex N S 32-160 submersible motor pumps are used for pumping waste water in intermittent operation, e.g.
More informationThermal oil. Hot Water Pumps
Type Series Booklet and 0 Hz 0.5/3-0 G Etanorm SYA/Etanorm-RSY Thermal Oil / Hot Water Pumps Automation products available: PumpExpert Hyamaster hyatronic Fields of Application Etanorm SYA/Etanorm-RSY
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationIDROCHEMICAL CENTRIFUGAL PUMPS FOR CHEMICAL SERVICE ACCORDING TO ISO 2858 STANDARDS
IDROCHEMICAL CENTRIFUGAL PUMPS AND MIXERS NCM Line CENTRIFUGAL PUMPS FOR CHEMICAL SERVICE ACCORDING TO ISO 2858 STANDARDS GENERAL FEATURES The Idrochemical NCM process pumps conform to ISO 2858 dimensional
More informationSide channel pump PN 40 SRZ. self-priming, according to DIN EN 734. Technical description
Side channel pump PN 0 self-priming, according to DIN EN 7 SRZ Technical description SRZ pumps are self-priming side channel pumps in multistage construction capable of handling aerated liquids. They have
More informationMultistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125. Jansen Pompentechniek T: +31(0) E:
Multistage Pumps MP, MPA, MPB, MPV SIZES DN 40 - DN 125 Technical Data Performance range: m Capacities up to 340m 3 /h (1500USgpm) m Head up to 500m (1640feet) m Max. speed up to 3600rpm Multistage pumps
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationASME END SUCTION PUMPS Catalogue K-90
ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationNTT CENTRIFUGAL PUMPS TO EN733 (DIN 24255) FOR HEAT TRANSFER OILS UP TO 350 C
FOR HEAT TRANSFER OILS UP TO 350 C WE HAVE ALL THE TICKS Version 1 - NTT: Rapid Allweiler Pumps Whilst all care has been taken to ensure the accuracy of the information contained in this brochure was correct
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationSewage transport Submersible pumps
Series description Wilo-Rexa FIT Available from January 2012 Construction Submersible sewage pump with cast iron hydraulics and stainless steel motor Type key Example: Wilo Rexa FIT V06DA-110/EAD1-2-T0015-540-A
More informationCENTRIFUGAL PROCESS PUMPS MODEL A100 ANSI B73.1
CENTRIFUGAL PROCESS PUMPS MODEL A ANSI B7.1 Heavy Duty Design Features Permit a Wide Range of Process Services All EAGLE A pumps have 1 lb. raised face flanges as standard except 1" and " casings which
More informationVolute Casing Centrifugal Pumps PN 16 for Heat Transfer Oils up to 350 C Series NTT Pump dimensions acc. to DIN EN 733 with additional sizes
Volute Casing Centrifugal Pumps PN 16 for Heat Transfer Oils up to 350 C Series NTT Pump dimensions acc. to DIN EN 733 with additional sizes Application For handling organic heat-transfer oils in heat
More informationStandardised Water Pump. Etanorm. Type Series Booklet
Standardised Water Pump Etanorm Type Series Booklet Legal information/copyright Type Series Booklet Etanorm All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationAutomatic Waste Water Pump Station. Evamatic-Box N. Type Series Booklet
Automatic Waste Water Pump Station Evamatic-Box N Type Series Booklet Legal information/copyright Type Series Booklet Evamatic-Box N All rights reserved. The contents provided herein must neither be distributed,
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationThermoplastic Centrifugal Pump Type NMB-S
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump Type NMB-S Suction
More information