Project Planning Evolution compact. Traction Drive Elevator without Machine Room and Shaft Pit. Rated Load kg.

Transcription

1 Project Planning Evolution compact. Traction Drive Elevator without Machine oom and Shaft Pit. ated Load kg. SP CH A Company of ThyssenKrupp Elevator ThyssenKrupp Aufzüge tk

2 Evolution compact without Machine oom and Shaft Pit Higher, Faster, Less. Facts, Data and Dimensions. Evolution compact, the traction driven standard passenger elevator without machine room and shaft pit, has been designed for more powerful, but also economical passenger service in cases with little ground clearance (e.g. above underground carparks, supply lines and groundwater). A number of revolutionary innovations concerning the elevator car and various safety devices have enabled us to replace the shaft pit with a reduced shaft pit depth of only 300 mm. The Thyssen Mini gearless, a frequency-controlled, gearless high-performance drive, moves standardized elevator cars with rated loads of 630 or 1000 kg resp. 675 or 1050 kg with open through at a speed of 1.0 m/s. The standard equipment of our elevator installations implies the efficient, proven and convenient S8/K8 doors as twopart telescopic sliding doors in left-hand execution. However, they are also available in righthand execution or as central opening execution. The telescopic doors are 900 mm in width, the central opening doors are available in widths of 800 and 900 mm. And to complete the range, you can select between the installation of the landing doors on the landing in a recess or entirely in the shaft. The following shaft ground plans and vertical sections show the door openings with gaps between the wall soffit or lintel and door frame which can be filled by means of concreting or plastering and thus easily be made to fit the wall plastering of the building. However, you can also use wall frames in the case of altered dimensions. You will find more details in our project planning document Door openings. Please find information on the overall design of elevator installations in our separate planning information. Should your requirements or demands exceed the following range, please contact one of our experienced consultants. Abbreviations: A = right-hand door soffit CD = car depth CW = car width DH = door height = door width FF = finished floor O1 = hoisting ring above machine frame O2 = hoisting ring(s) above door(s) Q = rated load = recess = shaft depth SH = shaft head SP = shaft pit = shaft width = unfinished floor v = speed Dimensions The dimensions indicated are finished measures if not stated expressly. door recess meas. Q with without in acc. [kg]/ open door A CD CW with DIN [pass.] through type [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 18024/25 telescopic / no central telescopic / yes central telescopic / no central telescopic / yes central

3 Evolution compact without Machine oom and Shaft Pit A Cut Above. Shaft Ground Plans. With open through 675 kg / 9 passengers 1050 kg / 14 passengers With central opening sliding doors: With telescopic sliding doors: kg / 8 passengers 1000 kg / 13 passengers CW = 1100 CD CW = 1100 CD With central opening sliding doors:

4 Evolution compact without Machine oom and Shaft Pit A Cut Above. Constructional Ground Plans and Shaft Head Plans. Occurring Forces. Occurring forces [kn] Q [kg] 630 / / 1050 P1 Shaft head recess (machine frame) 7 7 P2 Shaft head recess (machine frame) P3 Shaft head recess (machine frame) P4 Shaft head recess (machine frame) O1 Shaft ceiling (hoisting ring for machine) O2 Shaft ceiling (hoisting ring for doors) Fill after installation. (by customer) Occurring forces [kn] Q [kg] 630 / / 1050 P7 Shaft pit floor (guide rails) P8 Shaft pit floor (car buffer) P9 Shaft pit floor (counterweight buffer) P10 Shaft pit floor (counterweight guide rails) The forces P7 P10 never occur simultaneously! Operating box. Only in top landing. 4

5 Evolution compact without Machine oom and Shaft Pit ising to the Top. Vertical Section. Shaft head (SH) min. = 3550/3650 (v = 1.0 m/s) Car height (CH) = 2200/2300 DH Door height (DH) = 2000/2100 FF Travel height (TH) max. = 40 m (v = 1.0 m/s) SP min. = 300 SP max. = 400 Travel height (TH) min. = DH FF ecess up to SP floor! 5

6 For additional information as well as planning and project data please see Planning information: Passenger- and freight elevators ( ) Passenger elevators without machine room ( ) Project planning documents: Passenger elevators without machine room, arranged in groups ( ) Comfort door S8/K8 planning information and project planning data ( ) Door openings comfort door S8/K8 ( ) Evolution classic traction drive elevator without machine room ( ) Evolution flexible M traction drive elevator without machine room with variable car dimensions, rated load ( ) Evolution flexible L traction drive elevator without machine room with variable car dimensions, rated load ( ) FF Please contact: ThyssenKrupp Aufzugswerke GmbH A Company of ThyssenKrupp Elevator P.O. Box , Stuttgart, Germany Tel.: +49 (0) , Fax: +49 (0) info@tke-aufzuege-de.thyssenkrupp.com Internet: Printed in Germany /03 The details quoted in this brochure can only be viewed as binding when confirmed expressly in writing. eproduction, reprint and storage only with authorization of the editor.