Project Planning Evolution classic. Traction Drive Elevator without Machine Room. Rated Load kg.

Transcription

1 Project Planning Evolution classic. Traction Drive Elevator without Machine oom. ated Load kg. A Company of ThyssenKrupp Elevator ThyssenKrupp Aufzüge tk

2 oom Higher, Faster, Less. Facts, Data and Measurements. Evolution classic, the traction driven standard passenger elevator without machine room, has been designed for more powerful but also economical passenger service for residential buildings, medium-sized commercial buildings and hotels. The Thyssen Mini gearless, a frequency-controlled, gearless high-performance drive, moves standardized elevator cars with rated loads of 630 or 1000 kg resp. 675 or 1050 kg with open through at a speed of 1.0 m/s or 1.6 m/s. The standard equipment of our elevator installations implies the efficient, proven and convenient S8/K8 doors as two-part telescopic sliding doors in left-hand execution. However, they are also available in right-hand execution or as central opening execution. The telescopic doors are 900 mm in width, the central opening doors are available in widths of 800 and 900 mm. And to complete the range, you can select between the installation of the landing doors on the landing in a recess or entirely in the shaft. The following shaft ground plans and vertical sections show the door openings with gaps between the wall soffit or lintel and door frame which can be filled by means of concreting or plastering and thus easily be made to fit the wall plastering of the building. However, you can also use wall frames in the case of altered dimensions. You will find more details in our project planning document Door openings. Please find information on the overall design of elevator installations in our separate planning information. Should your requirements or demands exceed the following range, please contact one of our experienced consultants. Abbreviations: A = right-hand door soffit CD = car depth CW = car width = door width FF = finished floor Q = rated load = recess = shaft depth SH = shaft head SP = shaft pit = shaft width = unfinished floor v = speed Dimensions The dimensions indicated are finished measures if not stated expressly. door recess meas. Q with without in acc. [kg]/ open door A CD CW with DIN [pass.] through type [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 18024/25 telescopic / no central telescopic / yes central telescopic / no central telescopic / yes central

3 oom A Cut Above. Shaft Ground Plans. With open through 675 kg / 9 passengers 1050 kg / 14 passengers With central opening sliding doors: With telescopic sliding doors: With central opening sliding doors: CD CD 630 kg / 8 passengers 1000 kg / 13 passengers CW = 1100 CW =

4 oom A Cut Above. Constructional Ground Plans and Shaft Head Plans. Occurring forces. Q [kg] 630 / / 1050 Occurring forces [kn] v [m/s] 1,0 1,6 1,0 1,6 P1 Shaft head recess (machine frame) P2 Shaft head recess (machine frame) P3 Shaft head recess (machine frame) P4 Shaft head recess (machine frame) Shaft ceiling (hoisting ring for machine) Shaft ceiling (hoisting ring for doors) Fill after installation. (by customer) Q [kg] 630 / / 1050 Occurring forces [kn] v [m/s] 1,0 1,6 1,0 1,6 P7 Shaft pit floor (guide rails) P8 Shaft pit floor (car buffer) P9 Shaft pit floor (counterweight buffer) P10 Shaft pit floor (counterweight guide rails) The forces P7 P10 never occur simultaneously! Operating box. Only in top landing. 4

5 oom ising to the Top. Vertical Section. SP min. = 1400 Travel height (TH) max. = 40 m (v = 1.0 m/s) Shaft head (SH) min. = 3650/3750 (v = 1.0 m/s) Travel height (TH) max. = 50 m (v = 1.6 m/s) Shaft head (SH) min. = 3750/3850 (v = 1.6 m/s) Door height (DH) = 2200/2300 DH Door height (DH) = 2000/2100 FF FF 5

6 For additional information as well as planning and project data please see Planning information: Passenger- and freight elevators ( Evolution passenger elevators without machine room ( ) Project planning documents: Passenger elevators without machine room, arranged in groups ( ) Door openings comfort door S8/K8 ( ) Evolution compact* traction drive elevator without machine room and shaft pit ( ) * Not available for all countries, please contact our consultants. Please contact: ThyssenKrupp Aufzugswerke GmbH A Company of ThyssenKrupp Elevator P.O. Box , D Stuttgart, Germany Telephone: +49 (0) , Telefax: +49 (0) info@aufzuege.thyssen.com, Internet: Printed in Germany /02 The details quoted in this brochure can only be viewed as binding when confirmed expressly in writing.